phy simulators remove measurments printf and check/allow log level config

openair1/PHY/CODING/TESTBENCH/ldpctest.c

@@ -514,7 +514,7 @@ int main(int argc, char *argv[])
   unsigned char qbits=8;
   unsigned int decoded_errors[10000]; // initiate the size of matrix equivalent to size of SNR
   int c,i=0, i1 = 0;
-
+  int loglvl=OAILOG_WARNING;
   int n_trials = 1;
   double SNR_step = 0.1;
 
@@ -525,8 +525,11 @@ int main(int argc, char *argv[])
   n_iter_stats_t dec_iter[3];
 
   short BG=0,Zc,Kb=0;
+  if ( load_configmodule(argc,argv,CONFIG_ENABLECMDLINEONLY) == 0) {
+    exit_fun(" Error, configuration module init failed\n");
+  } // must be done before specific options parsing to prevent errasing them
   
-  while ((c = getopt (argc, argv, "q:r:s:S:l:G:n:d:i:t:u:hv:")) != -1)
+  while ((c = getopt (argc, argv, "q:r:s:S:l:L:G:n:d:i:t:u:hv:")) != -1)
     switch (c)
     {
       case 'q':
@@ -545,6 +548,10 @@ int main(int argc, char *argv[])
         block_length = atoi(optarg);
         break;
 
+      case 'L':
+        loglvl = atoi(optarg);
+        break;
+		
       case 'G':
         ldpc_version="_cuda";
         break;
@@ -581,6 +588,7 @@ int main(int argc, char *argv[])
               printf("BG1 (blocklength > 3840): 1/3, 2/3, 22/25 (8/9) \n");
               printf("BG2 (blocklength <= 3840): 1/5, 1/3, 2/3 \n\n");
               printf("-h This message\n");
+              printf("-L <log level, 0(errors), 1(warning), 2(info) 3(debug) 4 (trace)>\n");              
               printf("-q Quantization bits, Default: 8\n");
               printf("-r Nominator rate, (1, 2, 22), Default: 1\n");
               printf("-d Denominator rate, (3, 5, 25), Default: 1\n");
@@ -603,6 +611,8 @@ int main(int argc, char *argv[])
   printf("n_trials %d: \n", n_trials);
   printf("SNR0 %f: \n", SNR0);
 
+  logInit();
+  set_glog(loglvl);
 
   if (ldpc_version != NULL)
     load_nrLDPClib(ldpc_version);

openair1/PHY/NR_UE_TRANSPORT/nr_dlsch_demodulation.c

@@ -509,7 +509,6 @@ int nr_rx_pdsch(PHY_VARS_NR_UE *ue,
     stop_meas(&ue->generic_stat_bis[proc->thread_id][slot]);
     if (cpumeas(CPUMEAS_GETSTATE))
       LOG_D(PHY, "[AbsSFN %u.%d] Slot%d Symbol %d log2_maxh %d channel_level %d: Channel Comp  %5.2f \n", frame, nr_slot_rx, slot, symbol, pdsch_vars[gNB_id]->log2_maxh, proc->channel_level, ue->generic_stat_bis[proc->thread_id][slot].p_time/(cpuf*1000.0));
-
     start_meas(&ue->generic_stat_bis[proc->thread_id][slot]);
 
   if (frame_parms->nb_antennas_rx > 1) {
@@ -566,6 +565,7 @@ int nr_rx_pdsch(PHY_VARS_NR_UE *ue,
     stop_meas(&ue->generic_stat_bis[proc->thread_id][slot]);
     if (cpumeas(CPUMEAS_GETSTATE))
       LOG_D(PHY, "[AbsSFN %u.%d] Slot%d Symbol %d: Channel Combine  %5.2f \n",frame,nr_slot_rx,slot,symbol,ue->generic_stat_bis[proc->thread_id][slot].p_time/(cpuf*1000.0));
+
     start_meas(&ue->generic_stat_bis[proc->thread_id][slot]);
   /* Store the valid DL RE's */
     pdsch_vars[gNB_id]->dl_valid_re[symbol-1] = len;

openair1/SCHED_NR_UE/phy_procedures_nr_ue.c

@@ -1025,7 +1025,6 @@ bool nr_ue_dlsch_procedures(PHY_VARS_NR_UE *ue,
 
 
       stop_meas(&ue->dlsch_decoding_stats[proc->thread_id]);
-
     if (cpumeas(CPUMEAS_GETSTATE))  {
       LOG_D(PHY, " --> Unscrambling for CW0 %5.3f\n",
             (ue->dlsch_unscrambling_stats.p_time)/(cpuf*1000.0));
@@ -1859,7 +1858,6 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
     LOG_D(PHY, "[SFN %d] Slot1:       Pdsch Proc %5.2f\n",nr_slot_rx,ue->pdsch_procedures_stat[proc->thread_id].p_time/(cpuf*1000.0));
     LOG_D(PHY, "[SFN %d] Slot0 Slot1: Dlsch Proc %5.2f\n",nr_slot_rx,ue->dlsch_procedures_stat[proc->thread_id].p_time/(cpuf*1000.0));
   }
-
   // deactivate dlsch once dlsch proc is done
   ue->dlsch[proc->thread_id][gNB_id][0]->active = 0;
 
@@ -1933,6 +1931,8 @@ if (nr_slot_rx==9) {
  }
 
 stop_meas(&ue->generic_stat);
+if (cpumeas(CPUMEAS_GETSTATE))
+  LOG_D(PHY,"after tubo until end of Rx %5.2f \n",ue->generic_stat.p_time/(cpuf*1000.0));
 
 #ifdef EMOS
 phy_procedures_emos_UE_RX(ue,slot,gNB_id);
@@ -1944,6 +1944,7 @@ VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDUR
 stop_meas(&ue->phy_proc_rx[proc->thread_id]);
 if (cpumeas(CPUMEAS_GETSTATE))
   LOG_D(PHY, "------FULL RX PROC [SFN %d]: %5.2f ------\n",nr_slot_rx,ue->phy_proc_rx[proc->thread_id].p_time/(cpuf*1000.0));
+
 //#endif //pdsch
 
 LOG_D(PHY," ****** end RX-Chain  for AbsSubframe %d.%d ******  \n", frame_rx%1024, nr_slot_rx);

openair1/SIMULATION/NR_PHY/dlsim.c

@@ -645,6 +645,7 @@ int main(int argc, char **argv)
       printf("%s -h(elp) -p(extended_prefix) -N cell_id -f output_filename -F input_filename -g channel_model -n n_frames -t Delayspread -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant -i Intefrence0 -j Interference1 -A interpolation_file -C(alibration offset dB) -N CellId\n",
              argv[0]);
       printf("-h This message\n");
+      printf("-L <log level, 0(errors), 1(warning), 2(info) 3(debug) 4 (trace)>\n");  
       //printf("-p Use extended prefix mode\n");
       //printf("-d Use TDD\n");
       printf("-n Number of frames to simulate\n");

openair1/SIMULATION/NR_PHY/ulsim.c

@@ -600,6 +600,7 @@ int main(int argc, char **argv)
       //printf("-C Generate Calibration information for Abstraction (effective SNR adjustment to remove Pe bias w.r.t. AWGN)\n");
       printf("-F Input filename (.txt format) for RX conformance testing\n");
       printf("-G Offset of samples to read from file (0 default)\n");
+      printf("-L <log level, 0(errors), 1(warning), 2(info) 3(debug) 4 (trace)>\n"); 
       printf("-M Multiple SSB positions in burst\n");
       printf("-N Nid_cell\n");
       printf("-O oversampling factor (1,2,4,8,16)\n");
@@ -640,7 +641,7 @@ int main(int argc, char **argv)
   else if (N_RB_UL == 106) bandwidth = 40;
   else if (N_RB_UL == 32) bandwidth = 50;
   else { printf("Add N_RB_UL %d\n",N_RB_UL); exit(-1); }
-			   
+  LOG_I( PHY,"++++++++++++++++++++++++++++++++++++++++++++++%i+++++++++++++++++++++++++++++++++++++++++",loglvl);  
   if (openair0_cfg[0].threequarter_fs == 1) sampling_frequency*=.75;
 
   UE2gNB = new_channel_desc_scm(n_tx, n_rx, channel_model,