Skip to content

O
OpenXG-RAN
Commit 1ce0700e authored by laurent's avatar laurent
Browse files
Options

fix rfsimulator UE sync

parent fe6aa838
Hide whitespace changes
Inline Side-by-side
Showing with 47 additions and 31 deletions
executables/nr-ru.c
View file @ 1ce0700e
......@@ -1211,7 +1211,7 @@ static void *ru_thread_tx( void *param ) {
if(ru->if_south == LOCAL_RF)
{
uhd_set_thread_prio();
//uhd_set_thread_prio();
LOG_I(PHY,"set ru_thread_tx uhd priority");
}
......
targets/ARCH/COMMON/common_lib.c
View file @ 1ce0700e
......@@ -124,7 +124,7 @@ int load_lib(openair0_device *device, openair0_config_t *openair0_cfg, eth_param
return ret;
}
/*
void uhd_set_thread_prio(void) {
loader_shlibfunc_t shlib_fdesc[1];
......@@ -135,16 +135,17 @@ void uhd_set_thread_prio(void) {
libname="rfsimulator";
else
libname=OAI_RF_LIBNAME;
shlib_fdesc[0].fname="uhd_set_thread_priority";
//shlib_fdesc[0].fname="uhd_set_thread_priority";
ret=load_module_shlib(libname,shlib_fdesc,1,NULL);
if (ret < 0) {
LOG_E(HW,"Library %s couldn't be loaded\n",libname);
} else {
(set_prio_func_t)shlib_fdesc[0].fptr();
//(set_prio_func_t)shlib_fdesc[0].fptr();
}
return ret;
}
*/
int openair0_device_load(openair0_device *device, openair0_config_t *openair0_cfg) {
......
targets/ARCH/COMMON/common_lib.h
View file @ 1ce0700e
......@@ -447,7 +447,7 @@ int openair0_set_rx_frequencies(openair0_device *device, openair0_config_t *open
void uhd_set_thread_prio(void);
typedef void(*set_prio_func_t)(void);
set_prio_func_t uhd_set_thread_priority_fun;
//set_prio_func_t uhd_set_thread_priority_fun;
#ifdef __cplusplus
}
......
targets/ARCH/rfsimulator/simulator.c
View file @ 1ce0700e
......@@ -47,8 +47,8 @@ pthread_mutex_t Sockmutex;
typedef struct buffer_s {
int conn_sock;
bool alreadyRead;
uint64_t lastReceivedTS;
openair0_timestamp lastReceivedTS;
openair0_timestamp lastWroteTS;
bool headerMode;
samplesBlockHeader_t th;
char *transferPtr;
......@@ -60,7 +60,7 @@ typedef struct buffer_s {
typedef struct {
int listen_sock, epollfd;
uint64_t nextTimestamp;
openair0_timestamp nextTimestamp;
uint64_t typeStamp;
char *ip;
int saveIQfile;
......@@ -105,7 +105,9 @@ void rxAddInput( struct complex16 *input_sig, struct complex16 *after_channel_si
// the parameter "-s" is declared as SNR, but the input power is not well defined
// −132.24 dBm is a LTE subcarrier noise, that was used in origin code (15KHz BW thermal noise)
const double rxGain= 132.24 - snr_dB;
const double noise_per_sample = sqrt(0.5*noise_figure_watt) * pow(10,rxGain/20);
// sqrt(4*noise_figure_watt) is the thermal noise factor (volts)
// fixme: the last constant is pure trial results to make decent noise
const double noise_per_sample = sqrt(4*noise_figure_watt) * pow(10,rxGain/20) *10;
// Fixme: we don't fill the offset length samples at begining ?
// anyway, in today code, channel_offset=0
const int dd = abs(channelDesc->channel_offset);
......@@ -133,11 +135,6 @@ void rxAddInput( struct complex16 *input_sig, struct complex16 *after_channel_si
}
out_ptr->r += round(rx_tmp.x*pathLossLinear + noise_per_sample*gaussdouble(0.0,1.0));
/*
printf("in: %d, out %d= %f*%f + %f*%f\n",
input_sig[((TS+i)*nbTx)%CirSize].r, out_ptr->r , rx_tmp.x,
pathLossLinear, noise_per_sample,gaussdouble(0.0,1.0));
*/
out_ptr->i += round(rx_tmp.y*pathLossLinear + noise_per_sample*gaussdouble(0.0,1.0));
out_ptr++;
}
......@@ -156,8 +153,8 @@ void allocCirBuf(rfsimulator_state_t *bridge, int sock) {
AssertFatal ( (ptr->circularBuf=(sample_t *) malloc(sampleToByte(CirSize,1))) != NULL, "");
ptr->circularBufEnd=((char *)ptr->circularBuf)+sampleToByte(CirSize,1);
ptr->conn_sock=sock;
ptr->alreadyRead=false;
ptr->lastReceivedTS=0;
ptr->lastWroteTS=0;
ptr->headerMode=true;
ptr->transferPtr=(char *)&ptr->th;
ptr->remainToTransfer=sizeof(samplesBlockHeader_t);
......@@ -322,21 +319,22 @@ sin_addr:
setblocking(sock, notBlocking);
allocCirBuf(t, sock);
t->buf[sock].alreadyRead=true; // UE will start blocking on read
return 0;
}
uint64_t lastW=-1;
int rfsimulator_write(openair0_device *device, openair0_timestamp timestamp, void **samplesVoid, int nsamps, int nbAnt, int flags) {
rfsimulator_state_t *t = device->priv;
LOG_D(HW,"sending %d samples at time: %ld\n", nsamps, timestamp);
for (int i=0; i<FD_SETSIZE; i++) {
buffer_t *ptr=&t->buf[i];
buffer_t *b=&t->buf[i];
if (ptr->conn_sock >= 0 ) {
if (b->conn_sock >= 0 ) {
if ( abs((double)b->lastWroteTS-timestamp) > (double)CirSize)
LOG_E(HW,"Tx/Rx shift too large Tx:%lu, Rx:%lu\n", b->lastWroteTS, b->lastReceivedTS);
samplesBlockHeader_t header= {t->typeStamp, nsamps, nbAnt, timestamp};
fullwrite(ptr->conn_sock,&header, sizeof(header), t);
fullwrite(b->conn_sock,&header, sizeof(header), t);
sample_t tmpSamples[nsamps][nbAnt];
for(int a=0; a<nbAnt; a++) {
......@@ -346,17 +344,17 @@ int rfsimulator_write(openair0_device *device, openair0_timestamp timestamp, voi
tmpSamples[s][a]=in[s];
}
if (ptr->conn_sock >= 0 )
fullwrite(ptr->conn_sock, (void *)tmpSamples, sampleToByte(nsamps,nbAnt), t);
if (b->conn_sock >= 0 ) {
fullwrite(b->conn_sock, (void *)tmpSamples, sampleToByte(nsamps,nbAnt), t);
b->lastWroteTS=timestamp+nsamps;
}
}
}
lastW=timestamp;
LOG_D(HW,"sent %d samples at time: %ld->%ld, energy in first antenna: %d\n",
nsamps, timestamp, timestamp+nsamps, signal_energy(samplesVoid[0], nsamps) );
// Let's verify we don't have incoming data
// This is mandatory when the opposite side don't transmit
// This is mandatory when the opposite side don't transmit
flushInput(t, 0);
pthread_mutex_unlock(&Sockmutex);
return nsamps;
......@@ -428,7 +426,6 @@ static bool flushInput(rfsimulator_state_t *t, int timeout) {
AssertFatal( (t->typeStamp == UE_MAGICDL_FDD && b->th.magic==ENB_MAGICDL_FDD) ||
(t->typeStamp == ENB_MAGICDL_FDD && b->th.magic==UE_MAGICDL_FDD), "Socket Error in protocol");
b->headerMode=false;
b->alreadyRead=true;
if ( b->lastReceivedTS != b->th.timestamp) {
int nbAnt= b->th.nbAnt;
......@@ -444,8 +441,8 @@ static bool flushInput(rfsimulator_state_t *t, int timeout) {
}
b->lastReceivedTS=b->th.timestamp;
AssertFatal(lastW == -1 || ( abs((double)lastW-b->lastReceivedTS) < (double)CirSize),
"Tx/Rx shift too large Tx:%lu, Rx:%lu\n", lastW, b->lastReceivedTS);
AssertFatal(b->lastWroteTS == 0 || ( abs((double)b->lastWroteTS-b->lastReceivedTS) < (double)CirSize),
"Tx/Rx shift too large Tx:%lu, Rx:%lu\n", b->lastWroteTS, b->lastReceivedTS);
b->transferPtr=(char *)&b->circularBuf[b->lastReceivedTS%CirSize];
b->remainToTransfer=sampleToByte(b->th.size, b->th.nbAnt);
}
......@@ -501,15 +498,33 @@ int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimestamp, vo
return nsamps;
}
} else {
bool have_to_wait;
do {
have_to_wait=false;
for ( int sock=0; sock<FD_SETSIZE; sock++) {
if ( t->buf[sock].circularBuf && t->buf[sock].alreadyRead )
if ( t->buf[sock].lastReceivedTS == 0 ||
(t->nextTimestamp+nsamps) > t->buf[sock].lastReceivedTS ) {
buffer_t *b=&t->buf[sock];
if ( b->circularBuf) {
LOG_D(HW,"sock: %d, lastWroteTS: %lu, lastRecvTS: %lu, TS must be avail: %lu\n",
sock, b->lastWroteTS,
b->lastReceivedTS,
t->nextTimestamp+nsamps);
if ( b->lastReceivedTS > b->lastWroteTS ) {
// The caller momdem (NB, UE, ...) must send Tx in advance, so we fill TX if Rx is in advance
// This occurs for example when UE is in sync mode: it doesn't transmit
// with USRP, it seems ok: if "tx stream" is off, we may consider it actually cuts the Tx power
struct complex16 v={0};
void *samplesVoid[b->th.nbAnt];
for ( int i=0; i <b->th.nbAnt; i++)
samplesVoid[i]=(void*)&v;
rfsimulator_write(device, b->lastReceivedTS, samplesVoid, 1, b->th.nbAnt, 0);
}
}
if ( b->circularBuf )
if ( t->nextTimestamp+nsamps > b->lastReceivedTS ) {
have_to_wait=true;
break;
}
......@@ -532,7 +547,7 @@ int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimestamp, vo
for (int sock=0; sock<FD_SETSIZE; sock++) {
buffer_t *ptr=&t->buf[sock];
if ( ptr->circularBuf && ptr->alreadyRead ) {
if ( ptr->circularBuf ) {
bool reGenerateChannel=false;
//fixme: when do we regenerate
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment