Skip to content

O
OpenXG-RAN
Commit 312cf0bf authored by Guy De Souza's avatar Guy De Souza
Browse files
Options

NR config file

parent 1447d0fa
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 289 additions and 250 deletions
openair1/PHY/INIT/defs.h
View file @ 312cf0bf
......@@ -372,6 +372,7 @@ void phy_config_request(PHY_Config_t *phy_config);
int init_frame_parms(LTE_DL_FRAME_PARMS *frame_parms,uint8_t osf);
void dump_frame_parms(LTE_DL_FRAME_PARMS *frame_parms);
void nr_phy_config_request(PHY_VARS_gNB *gNB);
/** @} */
#endif
......
openair1/PHY/INIT/nr_init.c
View file @ 312cf0bf
This diff is collapsed.
openair1/PHY/defs.h
View file @ 312cf0bf
......@@ -1929,7 +1929,7 @@ typedef struct PHY_VARS_gNB_s {
int rx_total_gain_dB;
int (*start_if)(struct RU_t_s *ru,struct PHY_VARS_gNB_s *gNB);
uint8_t local_flag;
nfapi_config_request_t *gNB_config;
nfapi_config_request_t gNB_config;
NR_DL_FRAME_PARMS frame_parms;
PHY_MEASUREMENTS_gNB measurements;
IF_Module_t *if_inst;
......
openair1/SCHED_NR/phy_procedures_nr_gNB.c
View file @ 312cf0bf
......@@ -43,14 +43,14 @@ extern uint8_t nfapi_mode;
void nr_common_signal_procedures (PHY_VARS_gNB *gNB,int frame, int subframe) {
NR_DL_FRAME_PARMS *fp=&gNB->frame_parms;
nfapi_config_request_t *cfg = gNB->gNB_config;
nfapi_config_request_t *cfg = &gNB->gNB_config;
int **txdataF = gNB->common_vars.txdataF;
uint8_t *pbch_pdu=&gNB->pbch_pdu[0];
LOG_D(PHY,"common_signal_procedures: frame %d, subframe %d\n",frame,subframe);
int ssb_start_symbol = nr_get_ssb_start_symbol(cfg, fp);
nr_set_ssb_first_subcarrier(cfg);
//nr_set_ssb_first_subcarrier(cfg);
if (subframe == (cfg->sch_config.half_frame_index)? 0:5)
{
......@@ -69,7 +69,7 @@ void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB,
int subframe=proc->subframe_tx;
NR_DL_FRAME_PARMS *fp=&gNB->frame_parms;
nfapi_config_request_t *cfg = gNB->gNB_config;
nfapi_config_request_t *cfg = &gNB->gNB_config;
int offset = gNB->CC_id;
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpx300.conf 0 → 100644
View file @ 312cf0bf
Active_eNBs = ( "gNB-Eurecom-LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "gNB-Eurecom-LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "93";
tr_s_preference = "local_mac"
////////// Physical parameters:
component_carriers = (
{
node_function = "3GPP_gNODEB";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 22;
downlink_frequency = 3510000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 0;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -27;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.59/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.59/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 125;
eNB_instances = [0];
}
);
NETWORK_CONTROLLER :
{
FLEXRAN_ENABLED = "no";
FLEXRAN_INTERFACE_NAME = "lo";
FLEXRAN_IPV4_ADDRESS = "127.0.0.1";
FLEXRAN_PORT = 2210;
FLEXRAN_CACHE = "/mnt/oai_agent_cache";
FLEXRAN_AWAIT_RECONF = "no";
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
targets/RT/USER/nr-gnb.c
View file @ 312cf0bf
......@@ -827,7 +827,7 @@ void init_eNB_afterRU(void) {
// map antennas and PRACH signals to gNB RX
if (0) AssertFatal(gNB->num_RU>0,"Number of RU attached to gNB %d is zero\n",gNB->Mod_id);
LOG_I(PHY,"Mapping RX ports from %d RUs to gNB %d\n",gNB->num_RU,gNB->Mod_id);
gNB->gNB_config->rf_config.tx_antenna_ports.value = 0;
gNB->gNB_config.rf_config.tx_antenna_ports.value = 0;
//LOG_I(PHY,"Overwriting gNB->prach_vars.rxsigF[0]:%p\n", gNB->prach_vars.rxsigF[0]);
......@@ -836,7 +836,7 @@ void init_eNB_afterRU(void) {
LOG_I(PHY,"gNB->num_RU:%d\n", gNB->num_RU);
for (ru_id=0,aa=0;ru_id<gNB->num_RU;ru_id++) {
gNB->gNB_config->rf_config.tx_antenna_ports.value += gNB->RU_list[ru_id]->nb_rx;
gNB->gNB_config.rf_config.tx_antenna_ports.value += gNB->RU_list[ru_id]->nb_rx;
AssertFatal(gNB->RU_list[ru_id]->common.rxdataF!=NULL,
"RU %d : common.rxdataF is NULL\n",
......@@ -859,29 +859,29 @@ void init_eNB_afterRU(void) {
* In monolithic mode, we come here with nb_antennas_rx == 0
* (not tested in other modes).
*/
if (gNB->gNB_config->rf_config.tx_antenna_ports.value < 1)
if (gNB->gNB_config.rf_config.tx_antenna_ports.value < 1)
{
LOG_I(PHY, "%s() ************* DJP ***** gNB->gNB_config->rf_config.tx_antenna_ports:%d - GOING TO HARD CODE TO 1", __FUNCTION__, gNB->gNB_config->rf_config.tx_antenna_ports.value);
gNB->gNB_config->rf_config.tx_antenna_ports.value = 1;
LOG_I(PHY, "%s() ************* DJP ***** gNB->gNB_config.rf_config.tx_antenna_ports:%d - GOING TO HARD CODE TO 1", __FUNCTION__, gNB->gNB_config.rf_config.tx_antenna_ports.value);
gNB->gNB_config.rf_config.tx_antenna_ports.value = 1;
}
else
{
//LOG_I(PHY," Delete code\n");
}
if (gNB->gNB_config->rf_config.tx_antenna_ports.value < 1)
if (gNB->gNB_config.rf_config.tx_antenna_ports.value < 1)
{
LOG_I(PHY, "%s() ************* DJP ***** gNB->gNB_config->rf_config.tx_antenna_ports:%d - GOING TO HARD CODE TO 1", __FUNCTION__, gNB->gNB_config->rf_config.tx_antenna_ports.value);
gNB->gNB_config->rf_config.tx_antenna_ports.value = 1;
LOG_I(PHY, "%s() ************* DJP ***** gNB->gNB_config.rf_config.tx_antenna_ports:%d - GOING TO HARD CODE TO 1", __FUNCTION__, gNB->gNB_config.rf_config.tx_antenna_ports.value);
gNB->gNB_config.rf_config.tx_antenna_ports.value = 1;
}
else
{
//LOG_I(PHY," Delete code\n");
}
AssertFatal(gNB->gNB_config->rf_config.tx_antenna_ports.value >0,
"inst %d, CC_id %d : nb_antennas_rx %d\n",inst,CC_id,gNB->gNB_config->rf_config.tx_antenna_ports.value);
LOG_I(PHY,"inst %d, CC_id %d : nb_antennas_rx %d\n",inst,CC_id,gNB->gNB_config->rf_config.tx_antenna_ports.value);
AssertFatal(gNB->gNB_config.rf_config.tx_antenna_ports.value >0,
"inst %d, CC_id %d : nb_antennas_rx %d\n",inst,CC_id,gNB->gNB_config.rf_config.tx_antenna_ports.value);
LOG_I(PHY,"inst %d, CC_id %d : nb_antennas_rx %d\n",inst,CC_id,gNB->gNB_config.rf_config.tx_antenna_ports.value);
/// Transport init necessary for NR synchro
//init_transport(gNB);
//init_precoding_weights(RC.gNB[inst][CC_id]);
......@@ -932,6 +932,7 @@ void init_gNB(int single_thread_flag,int wait_for_sync) {
AssertFatal((gNB->if_inst = IF_Module_init(inst))!=NULL,"Cannot register interface");
gNB->if_inst->schedule_response = schedule_response;
gNB->if_inst->PHY_config_req = phy_config_request;
nr_phy_config_request(gNB);
memset((void*)&gNB->UL_INFO,0,sizeof(gNB->UL_INFO));
memset((void*)&gNB->Sched_INFO,0,sizeof(gNB->Sched_INFO));
LOG_I(PHY,"Setting indication lists\n");
......
targets/RT/USER/nr-ru.c
View file @ 312cf0bf
......@@ -590,7 +590,7 @@ void fh_if5_north_asynch_in(RU_t *ru,int *frame,int *subframe) {
void fh_if4p5_north_asynch_in(RU_t *ru,int *frame,int *subframe) {
NR_DL_FRAME_PARMS *fp = &ru->nr_frame_parms;
nfapi_config_request_t *cfg = ru->gNB_list[0]->gNB_config;
nfapi_config_request_t *cfg = &ru->gNB_list[0]->gNB_config;
RU_proc_t *proc = &ru->proc;
uint16_t packet_type;
......@@ -772,7 +772,7 @@ void tx_rf(RU_t *ru) {
RU_proc_t *proc = &ru->proc;
NR_DL_FRAME_PARMS *fp = &ru->nr_frame_parms;
nfapi_config_request_t *cfg = ru->gNB_list[0]->gNB_config;
nfapi_config_request_t *cfg = &ru->gNB_list[0]->gNB_config;
void *txp[ru->nb_tx];
unsigned int txs;
int i;
......@@ -883,7 +883,7 @@ static void* ru_thread_asynch_rxtx( void* param ) {
if (ru->fh_south_asynch_in) ru->fh_south_asynch_in(ru,&frame,&subframe);
// asynchronous receive from north (RRU IF4/IF5)
else if (ru->fh_north_asynch_in) {
if (nr_subframe_select(ru->gNB_list[0]->gNB_config,subframe)!=SF_UL)
if (nr_subframe_select(&ru->gNB_list[0]->gNB_config,subframe)!=SF_UL)
ru->fh_north_asynch_in(ru,&frame,&subframe);
}
else AssertFatal(1==0,"Unknown function in ru_thread_asynch_rxtx\n");
......@@ -1165,7 +1165,7 @@ void fill_rf_config(RU_t *ru, char *rf_config_file) {
int i;
NR_DL_FRAME_PARMS *fp = &ru->nr_frame_parms;
nfapi_config_request_t *gNB_config = ru->gNB_list[0]->gNB_config; //tmp index
nfapi_config_request_t *gNB_config = &ru->gNB_list[0]->gNB_config; //tmp index
openair0_config_t *cfg = &ru->openair0_cfg;
int N_RB = gNB_config->rf_config.dl_channel_bandwidth.value;
int mu = gNB_config->subframe_config.numerology_index_mu.value;
......@@ -1827,7 +1827,7 @@ void configure_ru(int idx,
RU_t *ru = RC.ru[idx];
RRU_config_t *config = (RRU_config_t *)arg;
RRU_capabilities_t *capabilities = (RRU_capabilities_t*)arg;
nfapi_config_request_t *gNB_config = ru->gNB_list[0]->gNB_config;
nfapi_config_request_t *gNB_config = &ru->gNB_list[0]->gNB_config;
int ret;
LOG_I(PHY, "Received capabilities from RRU %d\n",idx);
......@@ -1862,7 +1862,7 @@ void configure_ru(int idx,
LOG_I(PHY,"REMOTE_IF4p5: prach_FrequOffset %d, prach_ConfigIndex %d\n",
config->prach_FreqOffset[0],config->prach_ConfigIndex[0]);*/
nr_init_frame_parms(ru->gNB_list[0]->gNB_config, &ru->nr_frame_parms);
nr_init_frame_parms(&ru->gNB_list[0]->gNB_config, &ru->nr_frame_parms);
phy_init_RU(ru);
}
......@@ -1871,7 +1871,7 @@ void configure_rru(int idx,
RRU_config_t *config = (RRU_config_t *)arg;
RU_t *ru = RC.ru[idx];
nfapi_config_request_t *gNB_config = ru->gNB_list[0]->gNB_config;
nfapi_config_request_t *gNB_config = &ru->gNB_list[0]->gNB_config;
ru->nr_frame_parms.eutra_band = config->band_list[0];
ru->nr_frame_parms.dl_CarrierFreq = config->tx_freq[0];
......
targets/RT/USER/nr-softmodem.c
View file @ 312cf0bf
......@@ -689,8 +689,8 @@ void init_openair0(void) {
openair0_cfg[card].duplex_mode = duplex_mode_FDD;
printf("HW: Configuring card %d, nb_antennas_tx/rx %d/%d\n",card,
RC.gNB[0][0]->gNB_config->rf_config.tx_antenna_ports.value,
RC.gNB[0][0]->gNB_config->rf_config.tx_antenna_ports.value );
RC.gNB[0][0]->gNB_config.rf_config.tx_antenna_ports.value,
RC.gNB[0][0]->gNB_config.rf_config.tx_antenna_ports.value );
openair0_cfg[card].Mod_id = 0;
openair0_cfg[card].num_rb_dl=config[0]->rf_config.dl_channel_bandwidth.value;
......@@ -698,8 +698,8 @@ void init_openair0(void) {
openair0_cfg[card].clock_source = clock_source;
openair0_cfg[card].tx_num_channels=min(2,RC.gNB[0][0]->gNB_config->rf_config.tx_antenna_ports.value );
openair0_cfg[card].rx_num_channels=min(2,RC.gNB[0][0]->gNB_config->rf_config.tx_antenna_ports.value );
openair0_cfg[card].tx_num_channels=min(2,RC.gNB[0][0]->gNB_config.rf_config.tx_antenna_ports.value );
openair0_cfg[card].rx_num_channels=min(2,RC.gNB[0][0]->gNB_config.rf_config.tx_antenna_ports.value );
for (i=0; i<4; i++) {
......@@ -760,7 +760,7 @@ void wait_gNBs(void) {
for (j=0;j<RC.nb_L1_CC[i];j++) {
if (RC.gNB[i][j]->configured==0) {
waiting=0; //skip gNB configuration check
waiting=1;
break;
}
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment