updating RCC configuration file

targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band7.tm1.if4p5.50PRB.lo.conf

@@ -136,8 +136,8 @@ eNBs =
     };
 
 
-    ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "127.0.0.3";
+   ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.13.11";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -147,18 +147,18 @@ eNBs =
     NETWORK_INTERFACES :
     {
 
-        ENB_INTERFACE_NAME_FOR_S1_MME            = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "127.0.0.2/24";
-        ENB_INTERFACE_NAME_FOR_S1U               = "lo";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "127.0.0.5/24";
+        ENB_INTERFACE_NAME_FOR_S1_MME            = "eth1";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.13.10/24";
+        ENB_INTERFACE_NAME_FOR_S1U               = "eth1";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.13.10/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
     };
 
     rrh_gw_config = (
     {			  
-      	local_if_name = "lo";			  
-   	remote_address = "127.0.0.1";
-    	local_address = "127.0.0.2";    
+      	local_if_name = "eth0";			  
+   	remote_address = "192.168.12.170";
+    	local_address = "192.168.12.171";    
     	local_port = 50000;	#for raw option local port must be the same to remote	       
     	remote_port = 50000; 
     	rrh_gw_active = "yes";