Skip to content

O
OpenXG-RAN
Commit a21e858f authored by cig's avatar cig
Browse files
Options

Cleanup runmode @ UE side 

- removed unused arguments to phy functions
- removed irrelevant conditions on UE run mode
- replaced hardcoded param with PHY UE stored value
parent 1c24adee
Hide whitespace changes
Inline Side-by-side
Showing with 34 additions and 61 deletions
executables/nr-ue.c
View file @ a21e858f
...@@ -217,7 +217,7 @@ static void UE_synch(void *arg) { ...@@ -217,7 +217,7 @@ static void UE_synch(void *arg) {
double rx_gain_off = 0; double rx_gain_off = 0;
nr_get_carrier_frequencies(&UE->frame_parms, &dl_carrier, &ul_carrier); nr_get_carrier_frequencies(&UE->frame_parms, &dl_carrier, &ul_carrier);
if (nr_initial_sync( &syncD->proc, UE, UE->mode,2) == 0) { if (nr_initial_sync(&syncD->proc, UE, 2) == 0) {
freq_offset = UE->common_vars.freq_offset; // frequency offset computed with pss in initial sync freq_offset = UE->common_vars.freq_offset; // frequency offset computed with pss in initial sync
hw_slot_offset = ((UE->rx_offset<<1) / UE->frame_parms.samples_per_subframe * UE->frame_parms.slots_per_subframe) + hw_slot_offset = ((UE->rx_offset<<1) / UE->frame_parms.samples_per_subframe * UE->frame_parms.slots_per_subframe) +
round((float)((UE->rx_offset<<1) % UE->frame_parms.samples_per_subframe)/UE->frame_parms.samples_per_slot0); round((float)((UE->rx_offset<<1) % UE->frame_parms.samples_per_subframe)/UE->frame_parms.samples_per_slot0);
...@@ -359,10 +359,10 @@ void processSlotRX( PHY_VARS_NR_UE *UE, UE_nr_rxtx_proc_t *proc) { ...@@ -359,10 +359,10 @@ void processSlotRX( PHY_VARS_NR_UE *UE, UE_nr_rxtx_proc_t *proc) {
// Process Rx data for one sub-frame // Process Rx data for one sub-frame
#ifdef UE_SLOT_PARALLELISATION #ifdef UE_SLOT_PARALLELISATION
phy_procedures_slot_parallelization_nrUE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL ); phy_procedures_slot_parallelization_nrUE_RX( UE, proc, 0, 0, 1, no_relay, NULL );
#else #else
uint64_t a=rdtsc(); uint64_t a=rdtsc();
phy_procedures_nrUE_RX(UE, proc, gNB_id, UE->mode); phy_procedures_nrUE_RX(UE, proc, gNB_id);
LOG_D(PHY, "In %s: slot %d, time %lu\n", __FUNCTION__, proc->nr_slot_rx, (rdtsc()-a)/3500); LOG_D(PHY, "In %s: slot %d, time %lu\n", __FUNCTION__, proc->nr_slot_rx, (rdtsc()-a)/3500);
#endif #endif
......
openair1/PHY/NR_UE_TRANSPORT/nr_initial_sync.c
View file @ a21e858f
...@@ -103,7 +103,7 @@ void free_list(NR_UE_SSB *node) { ...@@ -103,7 +103,7 @@ void free_list(NR_UE_SSB *node) {
} }
int nr_pbch_detection(UE_nr_rxtx_proc_t * proc, PHY_VARS_NR_UE *ue, int pbch_initial_symbol, runmode_t mode) int nr_pbch_detection(UE_nr_rxtx_proc_t * proc, PHY_VARS_NR_UE *ue, int pbch_initial_symbol)
{ {
NR_DL_FRAME_PARMS *frame_parms=&ue->frame_parms; NR_DL_FRAME_PARMS *frame_parms=&ue->frame_parms;
int ret =-1; int ret =-1;
...@@ -202,7 +202,7 @@ int nr_pbch_detection(UE_nr_rxtx_proc_t * proc, PHY_VARS_NR_UE *ue, int pbch_ini ...@@ -202,7 +202,7 @@ int nr_pbch_detection(UE_nr_rxtx_proc_t * proc, PHY_VARS_NR_UE *ue, int pbch_ini
char duplex_string[2][4] = {"FDD","TDD"}; char duplex_string[2][4] = {"FDD","TDD"};
char prefix_string[2][9] = {"NORMAL","EXTENDED"}; char prefix_string[2][9] = {"NORMAL","EXTENDED"};
int nr_initial_sync(UE_nr_rxtx_proc_t *proc, PHY_VARS_NR_UE *ue, runmode_t mode, int n_frames) int nr_initial_sync(UE_nr_rxtx_proc_t *proc, PHY_VARS_NR_UE *ue, int n_frames)
{ {
int32_t sync_pos, sync_pos_frame; // k_ssb, N_ssb_crb, sync_pos2, int32_t sync_pos, sync_pos_frame; // k_ssb, N_ssb_crb, sync_pos2,
...@@ -299,7 +299,7 @@ int nr_initial_sync(UE_nr_rxtx_proc_t *proc, PHY_VARS_NR_UE *ue, runmode_t mode, ...@@ -299,7 +299,7 @@ int nr_initial_sync(UE_nr_rxtx_proc_t *proc, PHY_VARS_NR_UE *ue, runmode_t mode,
rx_sss_nr(ue, proc, &metric_tdd_ncp, &phase_tdd_ncp); rx_sss_nr(ue, proc, &metric_tdd_ncp, &phase_tdd_ncp);
nr_gold_pbch(ue); nr_gold_pbch(ue);
ret = nr_pbch_detection(proc, ue,1,mode); // start pbch detection at first symbol after pss ret = nr_pbch_detection(proc, ue, 1); // start pbch detection at first symbol after pss
if (ret == 0) { if (ret == 0) {
// sync at symbol ue->symbol_offset // sync at symbol ue->symbol_offset
......
openair1/PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h
View file @ a21e858f
...@@ -1172,8 +1172,7 @@ int nr_rx_pbch( PHY_VARS_NR_UE *ue, ...@@ -1172,8 +1172,7 @@ int nr_rx_pbch( PHY_VARS_NR_UE *ue,
int nr_pbch_detection(UE_nr_rxtx_proc_t *proc, int nr_pbch_detection(UE_nr_rxtx_proc_t *proc,
PHY_VARS_NR_UE *ue, PHY_VARS_NR_UE *ue,
int pbch_initial_symbol, int pbch_initial_symbol);
runmode_t mode);
uint16_t rx_pbch_emul(PHY_VARS_NR_UE *phy_vars_ue, uint16_t rx_pbch_emul(PHY_VARS_NR_UE *phy_vars_ue,
uint8_t eNB_id, uint8_t eNB_id,
...@@ -1453,7 +1452,6 @@ void generate_RIV_tables(void); ...@@ -1453,7 +1452,6 @@ void generate_RIV_tables(void);
*/ */
int nr_initial_sync(UE_nr_rxtx_proc_t *proc, int nr_initial_sync(UE_nr_rxtx_proc_t *proc,
PHY_VARS_NR_UE *phy_vars_ue, PHY_VARS_NR_UE *phy_vars_ue,
runmode_t mode,
int n_frames); int n_frames);
/*! /*!
......
openair1/SCHED_NR_UE/defs.h
View file @ a21e858f
...@@ -113,14 +113,12 @@ void phy_procedures_nrUE_TX(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t ...@@ -113,14 +113,12 @@ void phy_procedures_nrUE_TX(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t
@param ue Pointer to UE variables on which to act @param ue Pointer to UE variables on which to act
@param proc Pointer to proc information @param proc Pointer to proc information
@param gNB_id Local id of eNB on which to act @param gNB_id Local id of eNB on which to act
@param mode calibration/debug mode
*/ */
int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue, int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
UE_nr_rxtx_proc_t *proc, UE_nr_rxtx_proc_t *proc,
uint8_t gNB_id, uint8_t gNB_id);
runmode_t mode);
int phy_procedures_slot_parallelization_nrUE_RX(PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,uint8_t do_pdcch_flag,runmode_t mode,relaying_type_t r_type); int phy_procedures_slot_parallelization_nrUE_RX(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t eNB_id, uint8_t abstraction_flag, uint8_t do_pdcch_flag, relaying_type_t r_type);
#ifdef UE_SLOT_PARALLELISATION #ifdef UE_SLOT_PARALLELISATION
...@@ -221,7 +219,7 @@ void ra_succeeded(uint8_t Mod_id,uint8_t CC_id,uint8_t eNB_index); ...@@ -221,7 +219,7 @@ void ra_succeeded(uint8_t Mod_id,uint8_t CC_id,uint8_t eNB_index);
@param @param
@param @param
*/ */
void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t gNB_id, runmode_t mode); void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t gNB_id);
int is_nr_prach_subframe(NR_DL_FRAME_PARMS *frame_parms, uint32_t frame, uint8_t subframe); int is_nr_prach_subframe(NR_DL_FRAME_PARMS *frame_parms, uint32_t frame, uint8_t subframe);
......
openair1/SCHED_NR_UE/phy_procedures_nr_ue.c
View file @ a21e858f
...@@ -207,7 +207,6 @@ void phy_procedures_nrUE_TX(PHY_VARS_NR_UE *ue, ...@@ -207,7 +207,6 @@ void phy_procedures_nrUE_TX(PHY_VARS_NR_UE *ue,
int slot_tx = proc->nr_slot_tx; int slot_tx = proc->nr_slot_tx;
int frame_tx = proc->frame_tx; int frame_tx = proc->frame_tx;
runmode_t mode = normal_txrx;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_TX,VCD_FUNCTION_IN); VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_TX,VCD_FUNCTION_IN);
...@@ -243,7 +242,7 @@ void phy_procedures_nrUE_TX(PHY_VARS_NR_UE *ue, ...@@ -243,7 +242,7 @@ void phy_procedures_nrUE_TX(PHY_VARS_NR_UE *ue,
if (get_softmodem_params()->do_ra==1) { if (get_softmodem_params()->do_ra==1) {
if ((ue->UE_mode[gNB_id] > NOT_SYNCHED && ue->UE_mode[gNB_id] < PUSCH) && (ue->prach_vars[gNB_id]->prach_Config_enabled == 1)) { if ((ue->UE_mode[gNB_id] > NOT_SYNCHED && ue->UE_mode[gNB_id] < PUSCH) && (ue->prach_vars[gNB_id]->prach_Config_enabled == 1)) {
nr_ue_prach_procedures(ue, proc, gNB_id, mode); nr_ue_prach_procedures(ue, proc, gNB_id);
} }
} }
LOG_D(PHY,"****** end TX-Chain for AbsSubframe %d.%d ******\n", frame_tx, slot_tx); LOG_D(PHY,"****** end TX-Chain for AbsSubframe %d.%d ******\n", frame_tx, slot_tx);
...@@ -259,8 +258,7 @@ void nr_ue_measurement_procedures(uint16_t l, ...@@ -259,8 +258,7 @@ void nr_ue_measurement_procedures(uint16_t l,
PHY_VARS_NR_UE *ue, PHY_VARS_NR_UE *ue,
UE_nr_rxtx_proc_t *proc, UE_nr_rxtx_proc_t *proc,
uint8_t eNB_id, uint8_t eNB_id,
uint16_t slot, uint16_t slot){
runmode_t mode){
NR_DL_FRAME_PARMS *frame_parms=&ue->frame_parms; NR_DL_FRAME_PARMS *frame_parms=&ue->frame_parms;
int frame_rx = proc->frame_rx; int frame_rx = proc->frame_rx;
...@@ -874,8 +872,7 @@ void nr_process_rar(nr_downlink_indication_t *dl_info) { ...@@ -874,8 +872,7 @@ void nr_process_rar(nr_downlink_indication_t *dl_info) {
nr_process_timing_advance_rar(ue, frame_rx, nr_slot_rx, ta_command); nr_process_timing_advance_rar(ue, frame_rx, nr_slot_rx, ta_command);
if (ue->mode != debug_prach) ue->UE_mode[gNB_index] = RA_RESPONSE;
ue->UE_mode[gNB_index] = RA_RESPONSE;
} else { } else {
LOG_W(PHY,"[UE %d][RAPROC] Received RAR preamble (%d) doesn't match !!!\n", ue->Mod_id, prach_resources->ra_PreambleIndex); LOG_W(PHY,"[UE %d][RAPROC] Received RAR preamble (%d) doesn't match !!!\n", ue->Mod_id, prach_resources->ra_PreambleIndex);
...@@ -915,8 +912,7 @@ void nr_ue_dlsch_procedures(PHY_VARS_NR_UE *ue, ...@@ -915,8 +912,7 @@ void nr_ue_dlsch_procedures(PHY_VARS_NR_UE *ue,
PDSCH_t pdsch, PDSCH_t pdsch,
NR_UE_DLSCH_t *dlsch0, NR_UE_DLSCH_t *dlsch0,
NR_UE_DLSCH_t *dlsch1, NR_UE_DLSCH_t *dlsch1,
int *dlsch_errors, int *dlsch_errors) {
runmode_t mode) {
if (dlsch0==NULL) if (dlsch0==NULL)
AssertFatal(0,"dlsch0 should be defined at this level \n"); AssertFatal(0,"dlsch0 should be defined at this level \n");
...@@ -1694,8 +1690,7 @@ int is_pbch_in_slot(fapi_nr_config_request_t *config, int frame, int slot, NR_DL ...@@ -1694,8 +1690,7 @@ int is_pbch_in_slot(fapi_nr_config_request_t *config, int frame, int slot, NR_DL
int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue, int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
UE_nr_rxtx_proc_t *proc, UE_nr_rxtx_proc_t *proc,
uint8_t gNB_id, uint8_t gNB_id)
runmode_t mode)
{ {
int frame_rx = proc->frame_rx; int frame_rx = proc->frame_rx;
int nr_slot_rx = proc->nr_slot_rx; int nr_slot_rx = proc->nr_slot_rx;
...@@ -1874,7 +1869,7 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue, ...@@ -1874,7 +1869,7 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
ue->dlsch[proc->thread_id][gNB_id][0], ue->dlsch[proc->thread_id][gNB_id][0],
NULL); NULL);
nr_ue_measurement_procedures(2, ue, proc, gNB_id, nr_slot_rx, mode); nr_ue_measurement_procedures(2, ue, proc, gNB_id, nr_slot_rx);
} }
// do procedures for SI-RNTI // do procedures for SI-RNTI
...@@ -1893,8 +1888,7 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue, ...@@ -1893,8 +1888,7 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
SI_PDSCH, SI_PDSCH,
ue->dlsch_SI[gNB_id], ue->dlsch_SI[gNB_id],
NULL, NULL,
&ue->dlsch_SI_errors[gNB_id], &ue->dlsch_SI_errors[gNB_id]);
mode);
// deactivate dlsch once dlsch proc is done // deactivate dlsch once dlsch proc is done
ue->dlsch_SI[gNB_id]->active = 0; ue->dlsch_SI[gNB_id]->active = 0;
...@@ -1918,8 +1912,7 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue, ...@@ -1918,8 +1912,7 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
P_PDSCH, P_PDSCH,
ue->dlsch_p[gNB_id], ue->dlsch_p[gNB_id],
NULL, NULL,
&ue->dlsch_p_errors[gNB_id], &ue->dlsch_p_errors[gNB_id]);
mode);
// deactivate dlsch once dlsch proc is done // deactivate dlsch once dlsch proc is done
ue->dlsch_p[gNB_id]->active = 0; ue->dlsch_p[gNB_id]->active = 0;
...@@ -1943,8 +1936,7 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue, ...@@ -1943,8 +1936,7 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
RA_PDSCH, RA_PDSCH,
ue->dlsch_ra[gNB_id], ue->dlsch_ra[gNB_id],
NULL, NULL,
&ue->dlsch_ra_errors[gNB_id], &ue->dlsch_ra_errors[gNB_id]);
mode);
// deactivate dlsch once dlsch proc is done // deactivate dlsch once dlsch proc is done
ue->dlsch_ra[gNB_id]->active = 0; ue->dlsch_ra[gNB_id]->active = 0;
...@@ -1969,8 +1961,7 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue, ...@@ -1969,8 +1961,7 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
PDSCH, PDSCH,
ue->dlsch[proc->thread_id][gNB_id][0], ue->dlsch[proc->thread_id][gNB_id][0],
ue->dlsch[proc->thread_id][gNB_id][1], ue->dlsch[proc->thread_id][gNB_id][1],
&ue->dlsch_errors[gNB_id], &ue->dlsch_errors[gNB_id]);
mode);
#if UE_TIMING_TRACE #if UE_TIMING_TRACE
...@@ -2134,7 +2125,7 @@ uint8_t nr_is_ri_TXOp(PHY_VARS_NR_UE *ue, ...@@ -2134,7 +2125,7 @@ uint8_t nr_is_ri_TXOp(PHY_VARS_NR_UE *ue,
// todo: // todo:
// - set tx_total_RE // - set tx_total_RE
// - power control as per 38.213 ch 7.4 // - power control as per 38.213 ch 7.4
void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t gNB_id, runmode_t runmode) { void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t gNB_id) {
int frame_tx = proc->frame_tx, nr_slot_tx = proc->nr_slot_tx, prach_power; // tx_amp int frame_tx = proc->frame_tx, nr_slot_tx = proc->nr_slot_tx, prach_power; // tx_amp
uint16_t /*preamble_tx = 50,*/ pathloss; uint16_t /*preamble_tx = 50,*/ pathloss;
...@@ -2158,26 +2149,22 @@ void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t ...@@ -2158,26 +2149,22 @@ void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t
nr_prach = 1; nr_prach = 1;
} else { } else {
// ask L2 for RACH transport // ask L2 for RACH transport
if ((runmode != rx_calib_ue) && (runmode != rx_calib_ue_med) && (runmode != rx_calib_ue_byp) && (runmode != no_L2_connect) ) { LOG_D(PHY, "Getting PRACH resources. Frame %d Slot %d \n", frame_tx, nr_slot_tx);
LOG_D(PHY, "Getting PRACH resources. Frame %d Slot %d \n", frame_tx, nr_slot_tx); // flush Msg3 Buffer
// flush Msg3 Buffer if (prach_resources->Msg3 == NULL){
if (prach_resources->Msg3 == NULL){ for(int i = 0; i < NUMBER_OF_CONNECTED_gNB_MAX; i++) {
for(int i = 0; i<NUMBER_OF_CONNECTED_gNB_MAX; i++) { ue->ulsch_Msg3_active[i] = 0;
ue->ulsch_Msg3_active[i] = 0;
}
} }
nr_prach = nr_ue_get_rach(ue->prach_resources[gNB_id], &ue->prach_vars[0]->prach_pdu, mod_id, ue->CC_id, UE_mode, frame_tx, gNB_id, nr_slot_tx);
} }
nr_prach = nr_ue_get_rach(ue->prach_resources[gNB_id], &ue->prach_vars[0]->prach_pdu, mod_id, ue->CC_id, UE_mode, frame_tx, gNB_id, nr_slot_tx);
} }
if (ue->prach_resources[gNB_id] != NULL && nr_prach == 1 && prach_resources->init_msg1) { if (ue->prach_resources[gNB_id] != NULL && nr_prach == 1 && prach_resources->init_msg1) {
pathloss = get_nr_PL(mod_id, ue->CC_id, gNB_id); pathloss = get_nr_PL(mod_id, ue->CC_id, gNB_id);
LOG_D(PHY,"runmode %d\n",runmode);
if ((ue->mac_enabled == 1) && (runmode != calib_prach_tx)) { if (ue->mac_enabled)
ue->tx_power_dBm[nr_slot_tx] = prach_resources->ra_PREAMBLE_RECEIVED_TARGET_POWER + pathloss; ue->tx_power_dBm[nr_slot_tx] = prach_resources->ra_PREAMBLE_RECEIVED_TARGET_POWER + pathloss;
}
LOG_I(PHY,"[UE %d][RAPROC] Frame %d, nr_slot_tx %d : Generating PRACH, preamble %d, PL %d, P0_PRACH %d, TARGET_RECEIVED_POWER %d dBm, RA-RNTI %x\n", LOG_I(PHY,"[UE %d][RAPROC] Frame %d, nr_slot_tx %d : Generating PRACH, preamble %d, PL %d, P0_PRACH %d, TARGET_RECEIVED_POWER %d dBm, RA-RNTI %x\n",
ue->Mod_id, ue->Mod_id,
...@@ -2200,21 +2187,16 @@ void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t ...@@ -2200,21 +2187,16 @@ void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t
ue->prach_vars[gNB_id]->amp = AMP; ue->prach_vars[gNB_id]->amp = AMP;
#endif */ #endif */
if ((runmode == calib_prach_tx) && (((proc->frame_tx&0xfffe)%100)==0))
LOG_D(PHY,"[UE %d][RAPROC] Frame %d, nr_slot_tx %d : PRACH TX power %d dBm, amp %d\n", ue->Mod_id,
proc->frame_rx,
proc->nr_slot_tx,
ue->tx_power_dBm[nr_slot_tx],
ue->prach_vars[gNB_id]->amp);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GENERATE_PRACH, VCD_FUNCTION_IN); VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GENERATE_PRACH, VCD_FUNCTION_IN);
prach_power = generate_nr_prach(ue, gNB_id, nr_slot_tx); prach_power = generate_nr_prach(ue, gNB_id, nr_slot_tx);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GENERATE_PRACH, VCD_FUNCTION_OUT); VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GENERATE_PRACH, VCD_FUNCTION_OUT);
LOG_D(PHY,"[UE %d][RAPROC] PRACH PL %d dB, power %d dBm, digital power %d dB (amp %d)\n", LOG_D(PHY, "[UE %d][RAPROC][%d.%d]: PRACH PL %d dB, TX power %d dBm, digital power %d dB (amp %d)\n",
ue->Mod_id, ue->Mod_id,
proc->frame_rx,
proc->nr_slot_tx,
pathloss, pathloss,
ue->tx_power_dBm[nr_slot_tx], ue->tx_power_dBm[nr_slot_tx],
dB_fixed(prach_power), dB_fixed(prach_power),
...@@ -2242,9 +2224,5 @@ void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t ...@@ -2242,9 +2224,5 @@ void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t
nr_ra_succeeded(mod_id, ue->CC_id, gNB_id); nr_ra_succeeded(mod_id, ue->CC_id, gNB_id);
} }
// if we're calibrating the PRACH kill the pointer to its resources so that the RA protocol doesn't continue
if (runmode == calib_prach_tx)
ue->prach_resources[gNB_id] = NULL;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_TX_PRACH, VCD_FUNCTION_OUT); VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_TX_PRACH, VCD_FUNCTION_OUT);
} }
openair1/SIMULATION/NR_PHY/dlsim.c
View file @ a21e858f
...@@ -986,8 +986,7 @@ int main(int argc, char **argv) ...@@ -986,8 +986,7 @@ int main(int argc, char **argv)
phy_procedures_nrUE_RX(UE, phy_procedures_nrUE_RX(UE,
&UE_proc, &UE_proc,
0, 0);
normal_txrx);
//printf("dlsim round %d ends\n",round); //printf("dlsim round %d ends\n",round);
round++; round++;
......
openair1/SIMULATION/NR_PHY/pbchsim.c
View file @ a21e858f
...@@ -675,7 +675,7 @@ int main(int argc, char **argv) ...@@ -675,7 +675,7 @@ int main(int argc, char **argv)
} }
if (UE->is_synchronized == 0) { if (UE->is_synchronized == 0) {
UE_nr_rxtx_proc_t proc={0}; UE_nr_rxtx_proc_t proc={0};
ret = nr_initial_sync(&proc, UE, normal_txrx,1); ret = nr_initial_sync(&proc, UE, 1);
printf("nr_initial_sync1 returns %d\n",ret); printf("nr_initial_sync1 returns %d\n",ret);
if (ret<0) n_errors++; if (ret<0) n_errors++;
} }
......
openair1/SIMULATION/NR_PHY/prachsim.c
View file @ a21e858f
...@@ -641,7 +641,7 @@ int main(int argc, char **argv){ ...@@ -641,7 +641,7 @@ int main(int argc, char **argv){
UE_nr_rxtx_proc_t proc={0}; UE_nr_rxtx_proc_t proc={0};
proc.frame_tx = frame; proc.frame_tx = frame;
proc.nr_slot_tx = slot; proc.nr_slot_tx = slot;
nr_ue_prach_procedures(UE,&proc,0,0); nr_ue_prach_procedures(UE, &proc, 0);
/* tx_lev_dB not used later, no need to set */ /* tx_lev_dB not used later, no need to set */
//tx_lev_dB = (unsigned int) dB_fixed(tx_lev); //tx_lev_dB = (unsigned int) dB_fixed(tx_lev);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment