Merge remote-tracking branch 'develop' into fix_rfsim_mimo

Conflicts:
	targets/ARCH/rfsimulator/simulator.c

ci-scripts/Jenkinsfile-gitlab

@@ -66,7 +66,8 @@ pipeline {
             "Test-IF4p5-TDD-Band38-Multi-RRU",
             "Test-eNB-OAI-UE-FDD-Band7",
             "Test-Mono-FDD-Band13-X2-HO",
-            "Test-TDD-Band78-gNB-NR-UE"
+            "Test-TDD-Band78-gNB-NR-UE",
+            "Test-OCP-FDD-Band7"
         ])
         ansiColor('xterm')
     }
@@ -683,6 +684,25 @@ pipeline {
                         }
                     }
                 }
+                stage ("Test OAI OCP-eNB - FDD - Band 7 - B210") {
+                    steps {
+                        script {
+                            triggerSlaveJob ('OCPeNB-FDD-Band7-B210', 'Test-OCP-FDD-Band7')
+                        }
+                    }
+                    post {
+                        always {
+                            script {
+                                finalizeSlaveJob('OCPeNB-FDD-Band7-B210')
+                            }
+                        }
+                        failure {
+                            script {
+                                currentBuild.result = 'FAILURE'
+                            }
+                        }
+                    }
+                }
             }
             post {
                 always {

ci-scripts/cls_cots_ue.py

+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+# Python for CI of OAI-eNB + COTS-UE
+#
+#   Required Python Version
+#     Python 3.x
+#
+#   Required Python Package
+#     pexpect
+#---------------------------------------------------------------------
+
+#to use logging.info()
+import logging
+#to create a SSH object locally in the methods
+import sshconnection
+#time.sleep
+import time
+
+class CotsUe:
+	def __init__(self,model,UEIPAddr,UEUserName,UEPassWord):
+		self.model = model
+		self.UEIPAddr = UEIPAddr 
+		self.UEUserName = UEUserName
+		self.UEPassWord = UEPassWord
+		self.runargs = '' #on of off to toggle airplane mode on/off
+		self.__SetAirplaneRetry = 3
+
+#-----------------$
+#PUBLIC Methods$
+#-----------------$
+
+	def Check_Airplane(self):
+		mySSH = sshconnection.SSHConnection()
+		mySSH.open(self.UEIPAddr, self.UEUserName, self.UEPassWord)
+		status=mySSH.cde_check_value('sudo adb shell settings get global airplane_mode_on ', ['0','1'],5)
+		mySSH.close()
+		return status
+
+
+	def Set_Airplane(self,target_state_str):
+		mySSH = sshconnection.SSHConnection()
+		mySSH.open(self.UEIPAddr, self.UEUserName, self.UEPassWord)
+		mySSH.command('sudo adb start-server','$',5)
+		logging.info("Toggling COTS UE Airplane mode to : "+target_state_str)
+		current_state = self.Check_Airplane()
+		if target_state_str.lower()=="on": 
+			target_state=1
+		else:
+			target_state=0
+		if current_state != target_state:
+			#toggle state
+			retry = 0 
+			while (current_state!=target_state) and (retry < self.__SetAirplaneRetry):
+				mySSH.command('sudo adb shell am start -a android.settings.AIRPLANE_MODE_SETTINGS', '\$', 5)
+				mySSH.command('sudo adb shell input keyevent 20', '\$', 5)
+				mySSH.command('sudo adb shell input tap 968 324', '\$', 5)
+				time.sleep(1)
+				current_state = self.Check_Airplane()
+				retry+=1
+			if current_state != target_state:
+				logging.error("ATTENTION : Could not toggle to : "+target_state_str)
+				logging.error("Current state is : "+ str(current_state))
+		else:
+			print("Airplane mode is already "+ target_state_str)
+		mySSH.command('sudo adb kill-server','$',5)
+		mySSH.close()
+
+
+
+

ci-scripts/epc.py

@@ -66,38 +66,6 @@ class EPCManagement():
 		self.MmeIPAddress = ''
 		self.containerPrefix = 'prod'
 
-#-----------------------------------------------------------
-# Setter and Getters on Public Members
-#-----------------------------------------------------------
-
-	def SetIPAddress(self, ipaddress):
-		self.IPAddress = ipaddress
-	def GetIPAddress(self):
-		return self.IPAddress
-	def SetUserName(self, username):
-		self.UserName = username
-	def GetUserName(self):
-		return self.UserName
-	def SetPassword(self, password):
-		self.Password = password
-	def GetPassword(self):
-		return self.Password
-	def SetSourceCodePath(self, sourcecodepath):
-		self.SourceCodePath = sourcecodepath
-	def GetSourceCodePath(self):
-		return self.SourceCodePath
-	def SetType(self, kind):
-		self.Type = kind
-	def GetType(self):
-		return self.Type
-	def SetHtmlObj(self, obj):
-		self.htmlObj = obj
-	def SetTestCase_id(self, idx):
-		self.testCase_id = idx
-	def GetMmeIPAddress(self):
-		return self.MmeIPAddress
-	def SetContainerPrefix(self, prefix):
-		self.containerPrefix = prefix
 
 #-----------------------------------------------------------
 # EPC management functions

ci-scripts/html.py

@@ -82,73 +82,14 @@ class HTMLManagement():
 #-----------------------------------------------------------
 # Setters and Getters
 #-----------------------------------------------------------
-	def SethtmlUEFailureMsg(self,huefa):
-		self.htmlUEFailureMsg = huefa
-	def GethtmlUEFailureMsg(self):
-		return self.htmlUEFailureMsg
-	def SetHmleNBFailureMsg(self, msg):
-		self.htmleNBFailureMsg = msg
-
-	def Setdesc(self, dsc):
-		self.desc = dsc
-
-	def SetstartTime(self, sttime):
-		self.startTime = sttime
-
-	def SettestCase_id(self, tcid):
-		self.testCase_id = tcid
-	def GettestCase_id(self):
-		return self.testCase_id
-
-	def SetranRepository(self, repository):
-		self.ranRepository = repository
-	def SetranAllowMerge(self, merge):
-		self.ranAllowMerge = merge
-	def SetranBranch(self, branch):
-		self.ranBranch = branch
-	def SetranCommitID(self, commitid):
-		self.ranCommitID = commitid
-	def SetranTargetBranch(self, tbranch):
-		self.ranTargetBranch = tbranch
-
+	
 	def SethtmlUEConnected(self, nbUEs):
 		if nbUEs > 0:
 			self.htmlUEConnected = nbUEs
 		else:
 			self.htmlUEConnected = 1
-	def SethtmlNb_Smartphones(self, nbUEs):
-		self.htmlNb_Smartphones = nbUEs
-	def SethtmlNb_CATM_Modules(self, nbUEs):
-		self.htmlNb_CATM_Modules = nbUEs
-
-	def SetnbTestXMLfiles(self, nb):
-		self.nbTestXMLfiles = nb
-	def GetnbTestXMLfiles(self):
-		return self.nbTestXMLfiles
-
-	def SettestXMLfiles(self, xmlFile):
-		self.testXMLfiles.append(xmlFile)
-	def SethtmlTabRefs(self, tabRef):
-		self.htmlTabRefs.append(tabRef)
-	def SethtmlTabNames(self, tabName):
-		self.htmlTabNames.append(tabName)
-	def SethtmlTabIcons(self, tabIcon):
-		self.htmlTabIcons.append(tabIcon)
+	
 
-	def SetOsVersion(self, version, idx):
-		self.OsVersion[idx] = version
-	def SetKernelVersion(self, version, idx):
-		self.KernelVersion[idx] = version
-	def SetUhdVersion(self, version, idx):
-		self.UhdVersion[idx] = version
-	def SetUsrpBoard(self, version, idx):
-		self.UsrpBoard[idx] = version
-	def SetCpuNb(self, nb, idx):
-		self.CpuNb[idx] = nb
-	def SetCpuModel(self, model, idx):
-		self.CpuModel[idx] = model
-	def SetCpuMHz(self, freq, idx):
-		self.CpuMHz[idx] = freq
 
 #-----------------------------------------------------------
 # HTML structure creation functions

ci-scripts/py_params.yaml

+eNBRepository : b
+ranRepository : c
+eNB_AllowMerge : 
+ranAllowMerge : 
+eNBBranch : f
+ranBranch : g
+eNBCommitID :  
+ranCommitID : i
+eNBTargetBranch : j
+ranTargetBranch : k
+
+nodes : 
+  - type : eNB
+    IPAddress : 001.1.1
+    UserName : toto
+    Password : qwe
+    SourceCodePath : l
+  - type : gNB
+    IPAddress : 002.2.2
+    UserName : tata
+    Password : asd
+    SourceCodePath : m  
+  - type : eNB
+    IPAddress : 003.3.3
+    UserName : titi
+    Password : zxc
+    SourceCodePath : n
+  - type : gNB
+    IPAddress : 004.4.4
+    UserName : caca
+    Password : pepe
+    SourceCodePath :  o   
+
+EPCIPAddress : p
+EPCUserName : q
+EPCPassword : r
+EPCSourceCodePath : s
+EPCType : t
+EPCContainerPrefix : u
+
+ADBIPAddress : v
+ADBUserName : w
+ADBType : x
+ADBPassword : y
+
+XMLTestFile : z
+
+UEIPAddress : qqq
+UEUserName : www
+UEPassword : eee
+UESourceCodePath : yyy
+
+finalStatus : bbb
\ No newline at end of file

ci-scripts/py_params_template.yaml

+eNBRepository : b
+ranRepository : c
+eNB_AllowMerge : 
+ranAllowMerge : 
+eNBBranch : f
+ranBranch : g
+eNBCommitID :  
+ranCommitID : i
+eNBTargetBranch : j
+ranTargetBranch : k
+
+
+RAN:
+  RAN_inst_0:
+    name : RAN_1
+    nodes : 
+    - type : eNB
+      IPAddress : 001.1.1
+      UserName : toto
+      Password : qwe
+      SourceCodePath : l
+    - type : gNB
+      IPAddress : 002.2.2
+      UserName : tata
+      Password : asd
+      SourceCodePath : m  
+    - type : eNB
+      IPAddress : 003.3.3
+      UserName : titi
+      Password : zxc
+      SourceCodePath : n
+    - type : gNB
+      IPAddress : 004.4.4
+      UserName : caca
+      Password : pepe
+      SourceCodePath :  o        
+  RAN_inst_1:
+    name : RAN_2
+    nodes : 
+    - type : eNB
+      IPAddress : 101.1.1
+      UserName : toto
+      Password : qwe
+      SourceCodePath : l
+    - type : gNB
+      IPAddress : 102.2.2
+      UserName : zaza
+      Password : asd
+      SourceCodePath : m  
+    - type : eNB
+      IPAddress : 103.3.3
+      UserName : zizi
+      Password : zxc
+      SourceCodePath : n
+    - type : gNB
+      IPAddress : 104.4.4
+      UserName : aaaa
+      Password : pepe
+      SourceCodePath :  o   
+
+
+
+EPC:
+  EPC_inst_0:
+    EPCIPAddress : p
+    EPCUserName : q
+    EPCPassword : r
+    EPCSourceCodePath : s
+    EPCType : t
+    EPCContainerPrefix : u
+
+ADB:
+  ADBIPAddress : v
+  ADBUserName : w
+  ADBType : x
+  ADBPassword : y
+
+
+UE:
+  UE_inst_0:
+    name : UE_1 
+    type :
+    UEIPAddress : qqq  
+    UEUserName : www
+    UEPassword : eee
+    UESourceCodePath : yyy
+  UE_inst_1:
+    name : UE_2
+    type :
+    UEIPAddress : bloblob  
+    UEUserName : gwou
+    UEPassword : zebu
+    UESourceCodePath : pop
+
+
+XMLTestFile : z
+finalStatus : bbb
\ No newline at end of file

ci-scripts/sshconnection.py

@@ -101,6 +101,18 @@ class SSHConnection():
 		else:
 			sys.exit('SSH Connection Failed')
 
+
+
+
+	def cde_check_value(self, commandline, expected, timeout):
+		logging.debug(commandline)
+		self.ssh.timeout = timeout
+		self.ssh.sendline(commandline)
+		expected.append(pexpect.EOF)
+		expected.append(pexpect.TIMEOUT)
+		self.sshresponse = self.ssh.expect(expected)
+		return self.sshresponse
+
 	def command(self, commandline, expectedline, timeout):
 		logging.debug(commandline)
 		self.ssh.timeout = timeout

ci-scripts/xml_class_list.yml

+  - COTS_UE_Airplane
+  - Build_PhySim
+  - Run_PhySim
+  - Build_eNB
+  - WaitEndBuild_eNB
+  - Initialize_eNB
+  - Terminate_eNB
+  - Initialize_UE
+  - Terminate_UE
+  - Attach_UE
+  - Detach_UE
+  - Build_OAI_UE
+  - Initialize_OAI_UE
+  - Terminate_OAI_UE
+  - DataDisable_UE
+  - DataEnable_UE
+  - CheckStatusUE
+  - Ping
+  - Iperf
+  - Reboot_UE
+  - Initialize_FlexranCtrl
+  - Terminate_FlexranCtrl
+  - Initialize_HSS
+  - Terminate_HSS
+  - Initialize_MME
+  - Terminate_MME
+  - Initialize_SPGW
+  - Terminate_SPGW
+  - Initialize_CatM_module
+  - Terminate_CatM_module
+  - Attach_CatM_module
+  - Detach_CatM_module
+  - Ping_CatM_module
+  - IdleSleep
+  - Perform_X2_Handover

ci-scripts/xml_files/enb_ocp_usrp210_band7_test_05mhz_tm1.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-05-tm1</htmlTabRef>
+	<htmlTabName>Test-05MHz-TM1</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<repeatCount>4</repeatCount>
+	<TestCaseRequestedList>
+ 030201
+ 040101
+ 030101 040301 040501 040603 040604 040605 040606 040607 040641 040642 040643 040644 040401 040201 030201
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="030101">
+		<class>Initialize_eNB</class>
+		<desc>Initialize OCP-eNB (FDD/Band7/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf</Initialize_eNB_args>
+		<air_interface>ocp</air_interface>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate OCP-eNB</desc>
+		<air_interface>ocp</air_interface>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+	<testCase id="040301">
+		<class>Attach_UE</class>
+		<desc>Attach UE</desc>
+	</testCase>
+
+	<testCase id="040401">
+		<class>Detach_UE</class>
+		<desc>Detach UE</desc>
+	</testCase>
+
+	<testCase id="040501">
+		<class>Ping</class>
+		<desc>ping (5MHz - 20 sec)</desc>
+		<ping_args>-c 20</ping_args>
+		<ping_packetloss_threshold>5</ping_packetloss_threshold>
+	</testCase>
+
+	<testCase id="040603">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040604">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040605">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(unbalanced profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040606">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040607">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040641">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040642">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040643">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040644">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/enb_ocp_usrp210_build.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>build-tab</htmlTabRef>
+	<htmlTabName>Build</htmlTabName>
+	<htmlTabIcon>wrench</htmlTabIcon>
+	<TestCaseRequestedList>
+ 010101
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="010101">
+		<class>Build_eNB</class>
+		<desc>Build eNB OCP (USRP)</desc>
+		<Build_eNB_args>-w USRP -c --eNBocp --ninja</Build_eNB_args>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/fr1_multi_node_build.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>build-tab</htmlTabRef>
+	<htmlTabName>Build</htmlTabName>
+	<htmlTabIcon>wrench</htmlTabIcon>
+	<TestCaseRequestedList>
+ 000001 000002
+ 000003 000004
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="000001">
+		<class>Build_eNB</class>
+		<desc>Build eNB</desc>
+		<Build_eNB_args>-w USRP -c --eNB --ninja</Build_eNB_args>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+		<backgroundBuild>True</backgroundBuild>
+	</testCase>
+
+	<testCase id="000004">
+		<class>WaitEndBuild_eNB</class>
+		<desc>Wait for end of Build eNB</desc>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+	</testCase>
+
+	<testCase id="000002">
+		<class>Build_eNB</class>
+		<desc>Build gNB</desc>
+		<Build_eNB_args>-w USRP -c --gNB --ninja</Build_eNB_args>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+		<backgroundBuild>True</backgroundBuild>
+	</testCase>
+
+	<testCase id="000003">
+		<class>WaitEndBuild_eNB</class>
+		<desc>Wait for end of Build gNB</desc>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+	</testCase>
+
+
+</testCaseList>

ci-scripts/xml_files/fr1_multi_node_terminate.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-fr1-tm1</htmlTabRef>
+	<htmlTabName>Test-FR1-TM1</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<repeatCount>1</repeatCount>
+	<TestCaseRequestedList>
+ 070001
+ 070000
+	</TestCaseRequestedList>
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="070000">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+	</testCase>
+
+	<testCase id="070001">
+		<class>Terminate_eNB</class>
+		<desc>Terminate gNB</desc>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+	</testCase>
+
+</testCaseList>
+

ci-scripts/xml_files/fr1_multi_node_test.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-fr1-tm1</htmlTabRef>
+	<htmlTabName>Test-FR1-TM1</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<repeatCount>1</repeatCount>
+	<TestCaseRequestedList>
+ 030000
+ 040000
+ 000001
+ 070001
+ 070000
+	</TestCaseRequestedList>
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="030000">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.fr1.25PRB.usrpb210.conf</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+		<air_interface>lte</air_interface>
+	</testCase>
+
+	<testCase id="040000">
+		<class>Initialize_eNB</class>
+		<desc>Initialize gNB (3/4 sampling rate)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf -E</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+		<air_interface>nr</air_interface>
+	</testCase>
+
+	<testCase id="000001">
+		<class>IdleSleep</class>
+		<desc>Sleep</desc>
+		<idle_sleep_time_in_sec>30</idle_sleep_time_in_sec>
+	</testCase>
+
+	<testCase id="070000">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+	</testCase>
+
+	<testCase id="070001">
+		<class>Terminate_eNB</class>
+		<desc>Terminate gNB</desc>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+	</testCase>
+
+</testCaseList>
+

ci-scripts/xml_files/fr1_toggle_cots_ue.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-airplane-mode</htmlTabRef>
+	<htmlTabName>AirplaneToggle</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<TestCaseRequestedList>
+ 010000
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="010000">
+		<class>COTS_UE_Airplane</class>
+		<desc>Toggle COTS Airplane mode ON</desc>
+		<cots_ue_airplane_args>ON</cots_ue_airplane_args>
+	</testCase>
+
+
+</testCaseList>

ci-scripts/xml_files/gnb_usrp_build.xml

@@ -34,7 +34,7 @@
 		<mode>TesteNB</mode>	
 		<class>Build_eNB</class>
 		<desc>Build gNB (USRP)</desc>
-		<Build_eNB_args>--gNB -w USRP</Build_eNB_args>
+		<Build_eNB_args>--gNB -w USRP --ninja</Build_eNB_args>
 		<forced_workspace_cleanup>True</forced_workspace_cleanup>
 	</testCase>
 

ci-scripts/xml_files/nr_ue_usrp_build.xml

@@ -34,7 +34,7 @@
 		<mode>TestUE</mode>
 		<class>Build_OAI_UE</class>
 		<desc>Build NR UE (USRP)</desc>
-		<Build_OAI_UE_args>--nrUE -w USRP</Build_OAI_UE_args>
+		<Build_OAI_UE_args>--nrUE -w USRP --ninja</Build_OAI_UE_args>
 		<clean_repository>false</clean_repository>
 	</testCase>
 

cmake_targets/CMakeLists.txt

@@ -27,6 +27,10 @@ cmake_minimum_required (VERSION 3.0)
 # Base directories, compatible with legacy OAI building #
 #########################################################
 set (OPENAIR_DIR     $ENV{OPENAIR_DIR})
+if("${OPENAIR_DIR}" STREQUAL "")
+  string(REGEX REPLACE "/cmake_targets.*$" "" OPENAIR_DIR ${CMAKE_CURRENT_BINARY_DIR})
+endif()
+
 set (NFAPI_DIR       ${OPENAIR_DIR}/nfapi/open-nFAPI)
 set (NFAPI_USER_DIR  ${OPENAIR_DIR}/nfapi/oai_integration)
 set (OPENAIR1_DIR    ${OPENAIR_DIR}/openair1)
@@ -2474,8 +2478,8 @@ add_library(uescope MODULE ${XFORMS_SOURCE} ${XFORMS_SOURCE_SOFTMODEM} ${XFORMS_
 target_link_libraries(enbscope ${XFORMS_LIBRARIES})
 target_link_libraries(uescope ${XFORMS_LIBRARIES})
 
-add_library(gnbscope MODULE ${XFORMS_SOURCE_NR})
-target_link_libraries(gnbscope ${XFORMS_LIBRARIES})
+add_library(nrscope MODULE ${XFORMS_SOURCE_NR})
+target_link_libraries(nrscope ${XFORMS_LIBRARIES})
 
 
 add_library(rfsimulator MODULE 
@@ -2624,7 +2628,7 @@ add_executable(ocp-enb
   ${CONFIG_SOURCES}
   ${SHLIB_LOADER_SOURCES}
   )
-add_dependencies(ocp-enb rrc_flag s1ap_flag x2_flag oai_iqplayer)
+add_dependencies(ocp-enb rrc_flag s1ap_flag x2_flag oai_iqplayer coding params_libconfig rfsimulator)
 
 target_link_libraries (ocp-enb
   -Wl,--start-group
@@ -2731,7 +2735,7 @@ add_executable(nr-softmodem
   ${OPENAIR_DIR}/common/utils/system.c
   ${OPENAIR_DIR}/common/utils/nr/nr_common.c
   ${GTPU_need_ITTI}
-  ${XFORMS_SOURCE_NR}
+  ${XFORMSINTERFACE_SOURCE}
   ${T_SOURCE}
   ${CONFIG_SOURCES}
   ${SHLIB_LOADER_SOURCES}
@@ -2773,7 +2777,7 @@ add_executable(nr-uesoftmodem
   ${OPENAIR_DIR}/common/utils/utils.c
   ${OPENAIR_DIR}/common/utils/system.c
   ${OPENAIR_DIR}/common/utils/nr/nr_common.c
-  ${XFORMS_SOURCE_NR}
+  ${XFORMSINTERFACE_SOURCE}
   ${T_SOURCE}
   ${UTIL_SRC}
   ${CONFIG_SOURCES}

cmake_targets/build_oai

@@ -67,7 +67,7 @@ UE_TIMING_TRACE="False"
 USRP_REC_PLAY="False"
 BUILD_ECLIPSE=0
 NR="False"
-OPTIONAL_LIBRARIES="telnetsrv enbscope uescope msc"
+OPTIONAL_LIBRARIES="telnetsrv enbscope uescope nrscope msc"
 trap handle_ctrl_c INT
 
 function print_help() {
@@ -96,7 +96,9 @@ Options
    enable cmake debugging messages
 --eNB
   Makes the LTE softmodem
---gNB
+--eNBocp
+  Makes the OCP LTE softmodem
+-gNB
   Makes the NR softmodem
 --nrUE
   Makes the NR UE softmodem
@@ -237,7 +239,11 @@ function main() {
             eNB=1
             echo_info "Will compile eNB"
             shift;;
-       --gNB)
+       --eNBocp)
+            eNBocp=1
+            echo_info "Will compile OCP eNB"
+            shift;;
+      --gNB)
             gNB=1
             NR="True"
             echo_info "Will compile gNB"
@@ -443,7 +449,7 @@ function main() {
   ########################################################
   # to be discussed
   
-  if [ "$eNB" = "1" -o "$gNB" = "1" ] ; then
+  if [ "$eNB" = "1" -o "$eNBocp" = "1" -o "$gNB" = "1" ] ; then
       if [ "$HW" = "None" -a  "$TP" = "None" ] ; then
 	      echo_info "No local radio head and no transport protocol selected"
       fi
@@ -574,12 +580,13 @@ function main() {
   config_libconfig_shlib=params_libconfig
   
   # first generate the CMakefile in the right directory
-  if [ "$eNB" = "1" -o "$UE" = "1" -o "$gNB" = "1" -o "$nrUE" = "1" -o "$HW" = "EXMIMO" ] ; then
+  if [ "$eNB" = "1" -o "$eNBocp" = "1" -o "$UE" = "1" -o "$gNB" = "1" -o "$nrUE" = "1" -o "$HW" = "EXMIMO" ] ; then
 
     # softmodem compilation
 
     cmake_file=$DIR/$build_dir/CMakeLists.txt
     echo "cmake_minimum_required(VERSION 2.8)"                             >  $cmake_file
+    echo "project (OpenAirInterface)"                                    >> $cmake_file
     echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )"                     >> $cmake_file
     echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )"       >> $cmake_file
     echo "set ( UE_EXPANSION $UE_EXPANSION )"                             >> $cmake_file
@@ -606,6 +613,9 @@ function main() {
     if [ "$eNB" = "1" ] ; then
       execlist="$execlist lte-softmodem"
     fi
+    if [ "$eNBocp" = "1" ] ; then
+      execlist="$execlist ocp-enb"
+    fi
     if [ "$gNB" = "1" ] ; then
       execlist="$execlist nr-softmodem"
     fi
@@ -821,7 +831,7 @@ function main() {
   ####################################################
   # Build RF device and transport protocol libraries #
   ####################################################
-  if [ "$eNB" = "1" -o "$UE" = "1" -o "$gNB" = "1" -o "$nrUE" = "1" -o "$HWLAT" = "1" ] ; then
+  if [ "$eNB" = "1" -o "$eNBocp" = "1" -o "$UE" = "1" -o "$gNB" = "1" -o "$nrUE" = "1" -o "$HWLAT" = "1" ] ; then
 
       # build RF device libraries
       if [ "$HW" != "None" ] ; then

common/utils/ocp_itti/intertask_interface.cpp

@@ -80,7 +80,7 @@ task_list_t tasks[TASK_MAX];
 
   void *itti_malloc(task_id_t origin_task_id, task_id_t destination_task_id, ssize_t size) {
     void *ptr = NULL;
-    AssertFatal ((ptr=malloc (size)) != NULL, "Memory allocation of %zu bytes failed (%d -> %d)!\n",
+    AssertFatal ((ptr=calloc (size, 1)) != NULL, "Memory allocation of %zu bytes failed (%d -> %d)!\n",
                  size, origin_task_id, destination_task_id);
     return ptr;
   }

common/utils/telnetsrv/telnetsrv.c

@@ -53,6 +53,7 @@
 #include <sys/resource.h>
 #include "common/utils/load_module_shlib.h"
 #include "common/config/config_userapi.h"
+#include "common/utils/threadPool/thread-pool.h"
 #include "executables/softmodem-common.h"
 #include <readline/history.h>
 
@@ -507,12 +508,22 @@ int process_command(char *buf) {
         }
 
         rt= CMDSTATUS_FOUND;
-      } else if (strncasecmp(cmd,"get",3) == 0 || strncasecmp(cmd,"set",3) == 0) {
+      } else if (strcasecmp(cmd,"get") == 0 || strcasecmp(cmd,"set") == 0) {
         rt= setgetvar(i,cmd[0],cmdb);
       } else {
         for (k=0 ; telnetparams.CmdParsers[i].cmd[k].cmdfunc != NULL ; k++) {
           if (strncasecmp(cmd, telnetparams.CmdParsers[i].cmd[k].cmdname,sizeof(telnetparams.CmdParsers[i].cmd[k].cmdname)) == 0) {
-            telnetparams.CmdParsers[i].cmd[k].cmdfunc(cmdb, telnetparams.telnetdbg, client_printf);
+          	if (telnetparams.CmdParsers[i].cmd[k].qptr != NULL) {
+          		notifiedFIFO_elt_t *msg =newNotifiedFIFO_elt(sizeof(telnetsrv_qmsg_t),0,NULL,NULL);
+          		telnetsrv_qmsg_t *cmddata=NotifiedFifoData(msg);
+          		cmddata->cmdfunc=(qcmdfunc_t)telnetparams.CmdParsers[i].cmd[k].cmdfunc;
+          	    cmddata->prnt=client_printf;
+          	    cmddata->debug=telnetparams.telnetdbg;
+          		cmddata->cmdbuff=strdup(cmdb);
+          		pushNotifiedFIFO(telnetparams.CmdParsers[i].cmd[k].qptr, msg);
+          	} else {
+              telnetparams.CmdParsers[i].cmd[k].cmdfunc(cmdb, telnetparams.telnetdbg, client_printf);
+            }
             rt= CMDSTATUS_FOUND;
           }
         } /* for k */
@@ -673,6 +684,16 @@ void run_telnetsrv(void) {
   return;
 }
 
+void poll_telnetcmdq(void *qid, void *arg) {
+	notifiedFIFO_elt_t *msg = pollNotifiedFIFO((notifiedFIFO_t *)qid);
+	
+	if (msg != NULL) {
+	  telnetsrv_qmsg_t *msgdata=NotifiedFifoData(msg);
+	  msgdata->cmdfunc(msgdata->cmdbuff,msgdata->debug,msgdata->prnt,arg);
+	  free(msgdata->cmdbuff);
+	  delNotifiedFIFO_elt(msg);
+	}
+}
 /*------------------------------------------------------------------------------------------------*/
 /* load the commands delivered with the telnet server
  *
@@ -758,6 +779,7 @@ int telnetsrv_autoinit(void) {
 */
 int add_telnetcmd(char *modulename, telnetshell_vardef_t *var, telnetshell_cmddef_t *cmd) {
   int i;
+  notifiedFIFO_t *afifo=NULL;
 
   if( modulename == NULL || var == NULL || cmd == NULL) {
     fprintf(stderr,"[TELNETSRV] Telnet server, add_telnetcmd: invalid parameters\n");
@@ -769,6 +791,13 @@ int add_telnetcmd(char *modulename, telnetshell_vardef_t *var, telnetshell_cmdde
       strncpy(telnetparams.CmdParsers[i].module,modulename,sizeof(telnetparams.CmdParsers[i].module)-1);
       telnetparams.CmdParsers[i].cmd = cmd;
       telnetparams.CmdParsers[i].var = var;
+      if (cmd->cmdflags & TELNETSRV_CMDFLAG_PUSHINTPOOLQ) {
+      	  if (afifo == NULL) {
+      	  	  afifo = malloc(sizeof(notifiedFIFO_t));
+      	  	  initNotifiedFIFO(afifo);
+      	  }
+      	  cmd->qptr = afifo;
+      }
       printf("[TELNETSRV] Telnet server: module %i = %s added to shell\n",
              i,telnetparams.CmdParsers[i].module);
       break;
@@ -797,8 +826,10 @@ int  telnetsrv_checkbuildver(char *mainexec_buildversion, char **shlib_buildvers
 }
 
 int telnetsrv_getfarray(loader_shlibfunc_t  **farray) {
-  *farray=malloc(sizeof(loader_shlibfunc_t));
+  *farray=malloc(sizeof(loader_shlibfunc_t)*2);
   (*farray)[0].fname=TELNET_ADDCMD_FNAME;
   (*farray)[0].fptr=(int (*)(void) )add_telnetcmd;
-  return 1;
+  (*farray)[1].fname=TELNET_POLLCMDQ_FNAME;
+  (*farray)[1].fptr=(int (*)(void) )poll_telnetcmdq; 
+  return ( 2);
 }

common/utils/telnetsrv/telnetsrv.h

@@ -53,13 +53,26 @@
 /* to add a set of new command to the telnet server shell */
 typedef void(*telnet_printfunc_t)(const char* format, ...);
 typedef int(*cmdfunc_t)(char*, int, telnet_printfunc_t prnt);
+typedef int(*qcmdfunc_t)(char*, int, telnet_printfunc_t prnt,void *arg);
 
+#define TELNETSRV_CMDFLAG_PUSHINTPOOLQ   (1<<0)    // ask the telnet server to push the command in a thread pool queue
 typedef struct cmddef {
     char cmdname[TELNET_CMD_MAXSIZE];
     char helpstr[TELNET_HELPSTR_SIZE];
     cmdfunc_t cmdfunc; 
+    unsigned int cmdflags;
+    void *qptr;
 } telnetshell_cmddef_t;
 
+/*----------------------------------------------------------------------------*/
+/* structure used to send a command via a message queue to enable */
+/* executing a command in a thread different from the telnet server thread */
+typedef struct telnetsrv_qmsg {
+  qcmdfunc_t cmdfunc;
+  telnet_printfunc_t prnt;
+  int debug;
+  char *cmdbuff;
+} telnetsrv_qmsg_t;
 /*----------------------------------------------------------------------------*/
 /*structure to be used when adding a module to the telnet server */
 /* This is the first parameter of the add_telnetcmd function, which can be used   */
@@ -111,9 +124,6 @@ typedef struct {
 } telnetsrv_params_t;
 
 
-
-typedef int(*addcmdfunc_t)(char*, telnetshell_vardef_t*, telnetshell_cmddef_t*);
-
 typedef void(*settelnetmodule_t)(char *name, void *ptr); 
 
 /*-------------------------------------------------------------------------------------------*/
@@ -133,7 +143,9 @@ VT escape sequence definition, for smarter display....
 
 /*---------------------------------------------------------------------------------------------*/
 #define TELNET_ADDCMD_FNAME "add_telnetcmd"
+#define TELNET_POLLCMDQ_FNAME "poll_telnetcmdq"
 typedef int(*add_telnetcmd_func_t)(char *, telnetshell_vardef_t *, telnetshell_cmddef_t *);
+typedef void(*poll_telnetcmdq_func_t)(void *qid,void *arg);
 #ifdef TELNETSERVERCODE
 int add_telnetcmd(char *modulename, telnetshell_vardef_t *var, telnetshell_cmddef_t *cmd);
 void set_sched(pthread_t tid, int pid,int priority);

common/utils/threadPool/thread-pool.c

@@ -111,9 +111,10 @@ void initTpool(char *params,tpool_t *pool, bool performanceMeas) {
   pool->activated=true;
   initNotifiedFIFO(&pool->incomingFifo);
   char *saveptr, * curptr;
+  char *parms_cpy=strdup(params);
   pool->nbThreads=0;
   pool->restrictRNTI=false;
-  curptr=strtok_r(params,",",&saveptr);
+  curptr=strtok_r(parms_cpy,",",&saveptr);
   struct one_thread * ptr;
   while ( curptr!=NULL ) {
     int c=toupper(curptr[0]);
@@ -145,7 +146,7 @@ void initTpool(char *params,tpool_t *pool, bool performanceMeas) {
 
     curptr=strtok_r(NULL,",",&saveptr);
   }
-
+  free(parms_cpy);
   if (pool->activated && pool->nbThreads==0) {
     printf("No servers created in the thread pool, exit\n");
     exit(1);

doc/TESTING_GNB_W_COTS_UE.md

-STATUS 2020/06/26 : information is up to date, but under continuous improvement
+STATUS 2020/07/30 : under continuous improvement ; updated the configuration files links with CI approved reference files
+
 
 ## Table of Contents ##
 
@@ -78,16 +79,16 @@ https://github.com/OPENAIRINTERFACE/openair-epc-fed/blob/master-documentation/do
 Each component (EPC, eNB, gNB) has its own configuration file.  
 These config files are passed as arguments of the run command line, using the option -O \<conf file\>
 
-Some config examples can be found in the following folder:  
-https://gitlab.eurecom.fr/oai/openairinterface5g/-/tree/develop/targets/PROJECTS/GENERIC-LTE-EPC/CONF
+The **REFERENCE** files for eNB and gNB, **used by the CI**, can be found here:  
+[enb conf file](../ci-scripts/conf_files/enb.band7.tm1.fr1.25PRB.usrpb210.conf)
+[gnb conf file](../ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf)
 
-Also base config files can be found here:  
-[enb conf file](https://gitlab.eurecom.fr/oai/openairinterface5g/-/blob/rh_doc_update_3/doc/testing_gnb_w_cots_ue_resources/enb.conf)  
-[gnb conf file](https://gitlab.eurecom.fr/oai/openairinterface5g/-/blob/rh_doc_update_3/doc/testing_gnb_w_cots_ue_resources/gnb.conf)
+These files have to be updated manually to set the IP addresses and frequency.  
 
-TO DO : attach base confif files
 
-These files have to be updated manually to set the IP addresses and frequency.  
+**ATTENTION** : an **EXTERNAL** clock is used to sync the eNB and gNB,  
+whether the clock is internal or external is defined in the configuration files (!! details needed !!)   
+
 
 1- In the **eNB configuration file** :
 - look for MME IP address, and update the **ipv4 field** with the IP address of the **EPC** server
@@ -128,7 +129,7 @@ These files have to be updated manually to set the IP addresses and frequency.
                             }
                           );
 ```
-- look for X2 IP address, and update the **4 fields** with the IP address of the **eNB** server (notice : even if -in principle- S1 MME is not required for gNB setting)
+- look for X2 IP address, and update the **4 fields** with the IP address of the **eNB** server / **gNB** server as below  (notice : even if -in principle- S1 MME is not required for gNB setting)
 ```
 
     ///X2
@@ -146,11 +147,11 @@ These files have to be updated manually to set the IP addresses and frequency.
     {
 
         GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        GNB_IPV4_ADDRESS_FOR_S1_MME              = "**YOUR_ENB_IP_ADDR**";
+        GNB_IPV4_ADDRESS_FOR_S1_MME              = "**YOUR_GNB_IP_ADDR**";
         GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        GNB_IPV4_ADDRESS_FOR_S1U                 = "**YOUR_ENB_IP_ADDR**";
+        GNB_IPV4_ADDRESS_FOR_S1U                 = "**YOUR_GNB_IP_ADDR**";
         GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
-        GNB_IPV4_ADDRESS_FOR_X2C                 = "**YOUR_ENB_IP_ADDR**";
+        GNB_IPV4_ADDRESS_FOR_X2C                 = "**YOUR_GNB_IP_ADDR**";
         GNB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 
@@ -215,26 +216,20 @@ Execute:
 
 ```
 
-For example:
-```
-~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./lte-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf | tee mylogfile.log
-```
-
-
 
 - **gNB** (on the gNB host)
 
 
 Execute: 
 ```
-~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./nr-softmodem -O **YOUR_GNB_CONF_FILE** | tee **YOUR_LOG_FILE**
+~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./nr-softmodem -O **YOUR_GNB_CONF_FILE** -E | tee **YOUR_LOG_FILE**
 
 ```
 
-For example:
-```
-~/openairinterface5g/cmake_targets/ran_build/build$ sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf | tee mylogfile.log
-```
+**ATTENTION** : for the gNB execution,    
+The -E option is required to enable the tri-quarter sampling rate when using a B2xx serie USRP  
+The -E opton is not needed when using a a N300 USRP  
+
 
 
 ## Test Case

executables/main-fs6.c

@@ -401,7 +401,7 @@ void sendFs6Ul(PHY_VARS_eNB *eNB, int UE_id, int harq_pid, int segmentID, int16_
   hULUE(newUDPheader)->O_ACK=eNB->ulsch[UE_id]->harq_processes[harq_pid]->O_ACK;
   memcpy(hULUE(newUDPheader)->o_ACK, eNB->ulsch[UE_id]->harq_processes[harq_pid]->o_ACK,
          sizeof(eNB->ulsch[UE_id]->harq_processes[harq_pid]->o_ACK));
-  hULUE(newUDPheader)->ta=lte_est_timing_advance_pusch(eNB, UE_id);
+  hULUE(newUDPheader)->ta=lte_est_timing_advance_pusch(&eNB->frame_parms, eNB->pusch_vars[UE_id]->drs_ch_estimates_time);
   hULUE(newUDPheader)->segment=segmentID;
   memcpy(hULUE(newUDPheader)->o, eNB->ulsch[UE_id]->harq_processes[harq_pid]->o,
          sizeof(eNB->ulsch[UE_id]->harq_processes[harq_pid]->o));

executables/main-ocp.c

@@ -1167,6 +1167,7 @@ int main ( int argc, char **argv ) {
   T_Config_Init();
 #endif
   configure_linux();
+  set_softmodem_sighandler();
   cpuf=get_cpu_freq_GHz();
   set_taus_seed (0);
 

executables/nr-softmodem.c

@@ -75,7 +75,7 @@ unsigned short config_frames[4] = {2,9,11,13};
 
 #include "system.h"
 #include <openair2/GNB_APP/gnb_app.h>
-
+#include "PHY/TOOLS/phy_scope_interface.h"
 #include "PHY/TOOLS/nr_phy_scope.h"
 #include "stats.h"
 #include "nr-softmodem.h"
@@ -156,7 +156,6 @@ char channels[128] = "0";
 
 int rx_input_level_dBm;
 
-uint32_t do_forms=0;
 int otg_enabled;
 
 //int number_of_cards = 1;
@@ -454,7 +453,11 @@ static void get_options(void) {
 
   paramdef_t cmdline_params[] = CMDLINE_PARAMS_DESC_GNB ;
 
+  CONFIG_SETRTFLAG(CONFIG_NOEXITONHELP);
+  get_common_options(SOFTMODEM_GNB_BIT );
   config_process_cmdline( cmdline_params,sizeof(cmdline_params)/sizeof(paramdef_t),NULL);
+  CONFIG_CLEARRTFLAG(CONFIG_NOEXITONHELP);
+
 
 
 
@@ -817,7 +820,6 @@ int main( int argc, char **argv )
   configure_linux();
   printf("Reading in command-line options\n");
   get_options ();
-  get_common_options(SOFTMODEM_GNB_BIT );
 
   if (CONFIG_ISFLAGSET(CONFIG_ABORT) ) {
     fprintf(stderr,"Getting configuration failed\n");
@@ -959,14 +961,14 @@ if(!IS_SOFTMODEM_NOS1)
   printf("RC.nb_RU:%d\n", RC.nb_RU);
   // once all RUs are ready initialize the rest of the gNBs ((dependence on final RU parameters after configuration)
   printf("ALL RUs ready - init gNBs\n");
-
-  if (do_forms==1) {
+  if(IS_SOFTMODEM_DOFORMS) {
+  	
     scopeParms_t p;
     p.argc=&argc;
     p.argv=argv;
     p.gNB=RC.gNB[0];
     p.ru=RC.ru[0];
-    gNBinitScope(&p);
+    load_softscope("nr",&p);
   }
 
   if (nfapi_mode != 1 && nfapi_mode != 2) {

executables/nr-softmodem.h

@@ -19,21 +19,12 @@
 /*----------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
 #define CMDLINE_PARAMS_DESC_GNB {  \
     {"mmapped-dma",           CONFIG_HLP_DMAMAP,      PARAMFLAG_BOOL,   uptr:&mmapped_dma,                  defintval:0,                   TYPE_INT,    0},        \
-    {"wait-for-sync",         NULL,                   PARAMFLAG_BOOL,   iptr:&wait_for_sync,                defintval:0,                   TYPE_INT,    0},        \
     {"single-thread-disable", CONFIG_HLP_NOSNGLT,     PARAMFLAG_BOOL,   iptr:&single_thread_flag,           defintval:1,                   TYPE_INT,    0},        \
     {"A" ,                    CONFIG_HLP_TADV,        0,                uptr:&timing_advance,               defintval:0,                   TYPE_UINT,   0},        \
-    {"C" ,                    CONFIG_HLP_DLF,         0,                u64ptr:&(downlink_frequency[0][0]), defuintval:DEFAULT_DLF,        TYPE_UINT64, 0},        \
-    {"a" ,                    CONFIG_HLP_CHOFF,       0,                iptr:&chain_offset,                 defintval:0,                   TYPE_INT,    0},        \
-    {"d" ,                    CONFIG_HLP_SOFTS,       PARAMFLAG_BOOL,   uptr:(uint32_t *)&do_forms,         defintval:0,                   TYPE_INT8,   0},        \
     {"E" ,                    CONFIG_HLP_TQFS,        PARAMFLAG_BOOL,   i8ptr:&threequarter_fs,             defintval:0,                   TYPE_INT8,   0},        \
     {"K" ,                    CONFIG_HLP_ITTIL,       PARAMFLAG_NOFREE, strptr:&itti_dump_file,             defstrval:"/tmp/itti.dump",    TYPE_STRING, 0},        \
     {"m" ,                    CONFIG_HLP_DLMCS,       0,                uptr:&target_dl_mcs,                defintval:0,                   TYPE_UINT,   0},        \
     {"t" ,                    CONFIG_HLP_ULMCS,       0,                uptr:&target_ul_mcs,                defintval:0,                   TYPE_UINT,   0},        \
-    {"q" ,                    CONFIG_HLP_STMON,       PARAMFLAG_BOOL,   iptr:&opp_enabled,                  defintval:0,                   TYPE_INT,    0},        \
-    {"numerology" ,           CONFIG_HLP_NUMEROLOGY,  PARAMFLAG_BOOL,   iptr:&numerology,                   defintval:0,                   TYPE_INT,    0},        \
-    {"emulate-rf" ,           CONFIG_HLP_EMULATE_RF,  PARAMFLAG_BOOL,   iptr:&emulate_rf,                   defintval:0,                   TYPE_INT,    0},        \
-    {"parallel-config",       CONFIG_HLP_PARALLEL_CMD,0,                strptr:(char **)&parallel_config,   defstrval:NULL,                TYPE_STRING, 0},        \
-    {"worker-config",         CONFIG_HLP_WORKER_CMD,  0,                strptr:(char **)&worker_config,     defstrval:NULL,                TYPE_STRING, 0},        \
     {"usrp-tx-thread-config", CONFIG_HLP_USRP_THREAD, 0,                iptr:&usrp_tx_thread,               defstrval:0,                   TYPE_INT,    0},        \
     {"s" ,                    CONFIG_HLP_SNR,         0,                dblptr:&snr_dB,                     defdblval:25,                  TYPE_DOUBLE, 0},        \
   }

executables/nr-uesoftmodem.c

@@ -76,12 +76,12 @@ unsigned short config_frames[4] = {2,9,11,13};
 #include <openair2/NR_UE_PHY_INTERFACE/NR_IF_Module.h>
 #include <openair1/SCHED_NR_UE/fapi_nr_ue_l1.h>
 
+/* Callbacks, globals and object handlers */
+
 //#include "stats.h"
 // current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
+#include "PHY/TOOLS/phy_scope_interface.h"
 #include "PHY/TOOLS/nr_phy_scope.h"
-// at eNB 0, an UL scope for every UE
-//FD_lte_phy_scope_enb *form_enb[MAX_NUM_CCs][NUMBER_OF_UE_MAX];
-
 #include <executables/nr-uesoftmodem.h>
 #include "executables/softmodem-common.h"
 #include "executables/thread-common.h"
@@ -151,14 +151,11 @@ char ref[128] = "internal";
 char channels[128] = "0";
 
 
-static char *parallel_config = NULL;
-static char *worker_config = NULL;
-
 int rx_input_level_dBm;
 
 //static int online_log_messages=0;
 
-uint32_t do_forms=0;
+
 int otg_enabled;
 //int number_of_cards = 1;
 
@@ -761,8 +758,10 @@ int main( int argc, char **argv ) {
   memset (&UE_PF_PO[0][0], 0, sizeof(UE_PF_PO_t)*NUMBER_OF_UE_MAX*MAX_NUM_CCs);
   configure_linux();
   mlockall(MCL_CURRENT | MCL_FUTURE);
-  if (do_forms)
-     nrUEinitScope(PHY_vars_UE_g[0][0]);
+ 
+  if(IS_SOFTMODEM_DOFORMS) { 
+    load_softscope("nr",PHY_vars_UE_g[0][0]);
+  }     
   number_of_cards = 1;
 
   for(int CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {

executables/nr-uesoftmodem.h

@@ -61,19 +61,11 @@
   {"single-thread-disable", CONFIG_HLP_NOSNGLT,     PARAMFLAG_BOOL, iptr:&single_thread_flag,              defintval:1,           TYPE_INT,    0}, \
   {"nr-dlsch-demod-shift",  CONFIG_HLP_DLSHIFT,     0,              iptr:(int32_t *)&nr_dlsch_demod_shift, defintval:0,           TYPE_INT,    0}, \
   {"A" ,                    CONFIG_HLP_TADV,        0,              uptr:&timing_advance,                  defintval:0,           TYPE_UINT,   0}, \
-  {"C" ,                    CONFIG_HLP_DLF,         0,              u64ptr:&(downlink_frequency[0][0]),    defuintval:0,TYPE_UINT64, 0}, \
-  {"a" ,                    CONFIG_HLP_CHOFF,       0,              iptr:&chain_offset,                    defintval:0,           TYPE_INT,    0}, \
-  {"d" ,                    CONFIG_HLP_SOFTS,       PARAMFLAG_BOOL, uptr:&do_forms,                        defintval:0,           TYPE_INT,    0}, \
   {"E" ,                    CONFIG_HLP_TQFS,        PARAMFLAG_BOOL, iptr:&threequarter_fs,                 defintval:0,           TYPE_INT,    0}, \
   {"m" ,                    CONFIG_HLP_DLMCS,       0,              uptr:&target_dl_mcs,                   defintval:0,           TYPE_UINT,   0}, \
   {"t" ,                    CONFIG_HLP_ULMCS,       0,              uptr:&target_ul_mcs,                   defintval:0,           TYPE_UINT,   0}, \
-  {"q" ,                    CONFIG_HLP_STMON,       PARAMFLAG_BOOL, iptr:&opp_enabled,                     defintval:0,           TYPE_INT,    0}, \
   {"T" ,                    CONFIG_HLP_TDD,         PARAMFLAG_BOOL, iptr:&tddflag,                         defintval:0,           TYPE_INT,    0}, \
   {"V" ,                    CONFIG_HLP_VCD,         PARAMFLAG_BOOL, iptr:&vcdflag,                         defintval:0,           TYPE_INT,    0}, \
-  {"numerology" ,           CONFIG_HLP_NUMEROLOGY,  0,              iptr:&numerology,                      defintval:0,           TYPE_INT,    0}, \
-  {"emulate-rf" ,           CONFIG_HLP_EMULATE_RF,  PARAMFLAG_BOOL, iptr:&emulate_rf,                      defintval:0,           TYPE_INT,    0}, \
-  {"parallel-config",       CONFIG_HLP_PARALLEL_CMD,0,              strptr:(char **)&parallel_config,      defstrval:NULL,        TYPE_STRING, 0}, \
-  {"worker-config",         CONFIG_HLP_WORKER_CMD,  0,              strptr:(char **)&worker_config,        defstrval:NULL,        TYPE_STRING, 0}, \
   {"s" ,                    CONFIG_HLP_SNR,         0,              dblptr:&snr_dB,                        defdblval:25,          TYPE_DOUBLE, 0}, \
   {"nbiot-disable",         CONFIG_HLP_DISABLNBIOT, PARAMFLAG_BOOL, iptr:&nonbiotflag,                     defintval:0,           TYPE_INT,    0}, \
   {"ue-timing-correction-disable", CONFIG_HLP_DISABLETIMECORR, PARAMFLAG_BOOL, iptr:&UE_no_timing_correction, defintval:0,        TYPE_INT,    0}, \

executables/split_headers.h

@@ -28,6 +28,7 @@
 #include <stdint.h>
 #include <stdbool.h>
 #include <openair1/PHY/defs_eNB.h>
+#include <common/utils/telnetsrv/telnetsrv_proccmd.h>
 
 #define CU_PORT "7878"
 #define DU_PORT "8787"
@@ -325,5 +326,6 @@ void fep_full(RU_t *ru, int subframe);
 void feptx_prec(RU_t *ru,int frame,int subframe);
 void feptx_ofdm(RU_t *ru, int frame, int subframe);
 void oai_subframe_ind(uint16_t sfn, uint16_t sf);
+void softmodem_printresources(int sig, telnet_printfunc_t pf);
 extern uint16_t sf_ahead;
 #endif

nfapi/open-nFAPI/nfapi/public_inc/nfapi_nr_interface_scf.h

@@ -364,7 +364,7 @@ typedef struct
 //table 3-22
 typedef struct 
 {
-  nfapi_uint8_tlv_t phy_cell_id;//Physical Cell ID, 𝑁_{𝐼𝐷}^{𝑐𝑒𝑙𝑙} [38.211, sec 7.4.2.1] Value: 0 ->1007
+  nfapi_uint16_tlv_t phy_cell_id;//Physical Cell ID, 𝑁_{𝐼𝐷}^{𝑐𝑒𝑙𝑙} [38.211, sec 7.4.2.1] Value: 0 ->1007
   nfapi_uint8_tlv_t frame_duplex_type;//Frame duplex type Value: 0 = FDD 1 = TDD
 
 } nfapi_nr_cell_config_t;

openair1/PHY/LTE_UE_TRANSPORT/prach_ue.c

@@ -55,7 +55,7 @@ int32_t generate_prach( PHY_VARS_UE *ue, uint8_t eNB_id, uint8_t subframe, uint1
   uint8_t preamble_index     = ue->prach_resources[eNB_id]->ra_PreambleIndex;
   uint8_t tdd_mapindex       = ue->prach_resources[eNB_id]->ra_TDD_map_index;
   int16_t *prachF           = ue->prach_vars[eNB_id]->prachF;
-  static int16_t prach_tmp[45600*2] __attribute__((aligned(32)));
+  static int16_t prach_tmp[45600*4] __attribute__((aligned(32)));
   int16_t *prach            = prach_tmp;
   int16_t *prach2;
   int16_t amp               = ue->prach_vars[eNB_id]->amp;

openair1/PHY/NR_TRANSPORT/nr_prach.c

@@ -540,7 +540,7 @@ void rx_nr_prach(PHY_VARS_gNB *gNB,
   uint16_t           rootSequenceIndex;  
   int                numrootSequenceIndex;
   uint8_t            restricted_set;      
-  uint8_t            n_ra_prb;
+  uint8_t            n_ra_prb=0xFF;
   int16_t            *prachF=NULL;
   int                nb_rx;
 

openair1/PHY/TOOLS/nr_phy_scope.c

@@ -26,6 +26,7 @@
 #include <stdlib.h>
 #include "nr_phy_scope.h"
 #include "executables/nr-softmodem-common.h"
+#include "executables/softmodem-common.h"
 #include <forms.h>
 
 #define TPUT_WINDOW_LENGTH 100
@@ -768,6 +769,15 @@ void nrUEinitScope(PHY_VARS_NR_UE *ue) {
   threadCreate(&forms_thread, nrUEscopeThread, ue, "scope", -1, OAI_PRIORITY_RT_LOW);
 }
 
+
+void nrscope_autoinit(void *dataptr) {
+  AssertFatal( (IS_SOFTMODEM_GNB_BIT||IS_SOFTMODEM_5GUE_BIT),"Scope cannot find NRUE or GNB context");
+  
+  if (IS_SOFTMODEM_GNB_BIT)
+  	 gNBinitScope(dataptr);
+  else
+     nrUEinitScope(dataptr);
+}
 // Kept to put back the functionality soon
 #if 0
 //FD_stats_form                  *form_stats=NULL,*form_stats_l2=NULL;
@@ -795,6 +805,8 @@ static void reset_stats_gNB(FL_OBJECT *button,
   }
 }
 
+
+
 static FD_stats_form *create_form_stats_form(int ID) {
   FL_OBJECT *obj;
   FD_stats_form *fdui = calloc(( sizeof *fdui ),1);

openair1/PHY/TOOLS/nr_phy_scope.h

@@ -40,8 +40,6 @@ typedef struct {
   PHY_VARS_gNB *gNB;
 } scopeParms_t;
 
-void gNBinitScope(scopeParms_t *p);
-void nrUEinitScope(PHY_VARS_NR_UE *ue);
 
 extern RAN_CONTEXT_t RC;
 #endif

openair1/PHY/TOOLS/phy_scope_interface.c

@@ -37,10 +37,10 @@
 #define SOFTSCOPE_ENDFUNC_IDX 0
 static  loader_shlibfunc_t scope_fdesc[]= {{"end_forms",NULL}};
 
-int load_softscope(char *exectype) {
+int load_softscope(char *exectype, void *initarg) {
   char libname[64];
   sprintf(libname,"%.10sscope",exectype);
-  return load_module_shlib(libname,scope_fdesc,1,NULL);
+  return load_module_shlib(libname,scope_fdesc,1,initarg);
 }
 
 int end_forms(void) {

openair1/PHY/TOOLS/phy_scope_interface.h

@@ -31,5 +31,5 @@
  */
 
 
-int load_softscope(char *exectype);
+int load_softscope(char *exectype, void *initarg);
 int end_forms(void) ;

openair1/PHY/TOOLS/readme.md

+
+To use the scope, run the xNB or the UE with option "-d"  
+
+Usage in gdb
+In gdb, when you break, you can refresh immediatly the scope view by calling the display function.
+The first paramter is the graph context, nevertheless we keep the last value for a dirty call in gdb (so you can use '0')  
+
+Example with no variable known
+phy_scope_nrUE(0, PHY_vars_UE_g[0][0], 0, 0, 0)
+
+or
+phy_scope_gNB(0, phy_vars_gnb, phy_vars_ru, UE_id)

openair1/PHY/phy_vars.h

@@ -59,10 +59,10 @@ const short conjugate2[8]__attribute__((aligned(16))) = {1,-1,1,-1,1,-1,1,-1};
 unsigned char NB_RU=0;
 
 #ifndef OPENAIR2
-unsigned char NB_eNB_INST=0;
-uint16_t NB_UE_INST=0;
-unsigned char NB_RN_INST=0;
-unsigned char NB_INST=0;
+//unsigned char NB_eNB_INST=0;
+//uint16_t NB_UE_INST=0;
+//unsigned char NB_RN_INST=0;
+//unsigned char NB_INST=0;
 #endif
 
 int number_of_cards;

openair1/PHY/phy_vars_nr_ue.h

@@ -138,4 +138,4 @@ uint8_t scrambling_lut[65536*16] __attribute__((aligned(32)));
 uint8_t max_ldpc_iterations=4;
 uint8_t max_turbo_iterations=4;
 
-#endif /*__PHY_VARS_H__ */
+#endif

openair1/SCHED_NR/phy_procedures_nr_gNB.c

@@ -424,7 +424,7 @@ void phy_procedures_gNB_uespec_RX(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx)
   for (int ULSCH_id=0;ULSCH_id<NUMBER_OF_NR_ULSCH_MAX;ULSCH_id++) {
     NR_gNB_ULSCH_t *ulsch = gNB->ulsch[ULSCH_id][0];
     int harq_pid;
-    int no_sig;
+    //int no_sig;
     NR_UL_gNB_HARQ_t *ulsch_harq;
 
     if ((ulsch) &&

openair2/ENB_APP/flexran_agent_extern.h

@@ -44,8 +44,6 @@ AGENT_PHY_xface *flexran_agent_get_phy_xface(mid_t mod_id);
 
 extern AGENT_MAC_xface *agent_mac_xface[NUM_MAX_ENB];
 #define flexran_agent_get_mac_xface(mod_id) (agent_mac_xface[mod_id])
-/* Control module interface for the communication of the RRC Control Module with the agent */
-
 /* Control module interface for the communication of the RRC Control Module with the agent */
 // AGENT_RRC_xface *flexran_agent_get_rrc_xface(mid_t mod_id);
 extern AGENT_RRC_xface *agent_rrc_xface[NUM_MAX_ENB];

targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp

@@ -976,7 +976,6 @@ extern "C" {
     double usrp_master_clock;
   
     if (device_adds[0].get("type") == "b200") {
-      printf("Found USRP b200\n");
       device->type = USRP_B200_DEV;
       usrp_master_clock = 30.72e6;
       args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);