Skip to content

O
OpenXG-RAN
Commit 29be7312 authored by Lionel Gauthier's avatar Lionel Gauthier
Browse files
Options

No more needed, replaced by start_enb.bash, start_epc.bash. 

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5143 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 9b9a6b63
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 763 deletions
targets/PROJECTS/GENERIC-LTE-EPC/start_lte-enb-ovs.bash deleted 100755 → 0
View file @ 9b9a6b63
#!/bin/bash
# Author Lionel GAUTHIER 01/20/2014
#
# This script start ENB+UE (all in one executable, on one host) with openvswitch setting
# MME+SP-GW executable have to be launched on the same host by your own (start_lte-epc-ovs.bash).
#
# hss.eur
# |
# +-----------+ +------+ +-----------+ v +----------+
# | eNB +------+ | ovs | VLAN 1+------+ MME +----+ +---+ HSS |
# | |cpenb0+------------------+cpmme0| | +------+ | |
# | +------+ |bridge| +------+ +----+ +---+ |
# | |upenb0+-------+ | | | +----------+
# +-----------+------+ | | | +-----------+
# +---|--+ | router.eur
# | +-----------+ | +--------------+
# | | S+P-GW | v | ROUTER |
# | VLAN2 +------+ +-------+ +----+ +----+
# +----------+upsgw0| |sgi +-...-+ | | +---...Internet
# +------+ +-------+ +----+ +----+
# | | 11 VLANS | |
# +-----------+ ids=[5..15] +--------------+
#
###########################################################
# Parameters
###########################################################
declare MAKE_LTE_ACCESS_STRATUM_TARGET="oaisim ENABLE_ITTI=1 USE_MME=R10 NAS=1 Rel10=1"
declare MAKE_IP_DRIVER_TARGET="ue_ip.ko"
declare IP_DRIVER_NAME="ue_ip"
declare LTEIF="oip1"
declare UE_IPv4="10.0.0.8"
declare UE_IPv6="2001:1::8"
declare UE_IPv6_CIDR=$UE_IPv6"/64"
declare UE_IPv4_CIDR=$UE_IPv4"/24"
###########################################################
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/utils.bash
###########################################################
test_command_install_package "gccxml" "gccxml" "--force-yes"
test_command_install_package "vconfig" "vlan"
test_command_install_package "iptables" "iptables"
test_command_install_package "iperf" "iperf"
test_command_install_package "ip" "iproute"
test_command_install_script "ovs-vsctl" "$OPENAIRCN_DIR/SCRIPTS/install_openvswitch1.9.0.bash"
test_command_install_package "tunctl" "uml-utilities"
test_command_install_lib "/usr/lib/libconfig.so" "libconfig-dev"
#######################################################
# USIM, NVRAM files
#######################################################
if [ ! -f $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data ]; then
make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS veryveryclean
make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS PROCESS=UE
fi
if [ ! -f $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data ]; then
make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS veryveryclean
make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS PROCESS=UE
fi
if [ ! -f .ue.nvram ]; then
# generate .ue_emm.nvram .ue.nvram
$OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data -g
fi
if [ ! -f .usim.nvram ]; then
# generate .usim.nvram
$OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data -g
fi
##################################################
# LAUNCH eNB + UE executable
##################################################
echo "Bringup UE interface"
pkill oaisim
bash_exec "rmmod $IP_DRIVER_NAME" > /dev/null 2>&1
cecho "make $MAKE_IP_DRIVER_TARGET $MAKE_LTE_ACCESS_STRATUM_TARGET ....." $green
#bash_exec "make --directory=$OPENAIR2_DIR $MAKE_IP_DRIVER_TARGET "
make --directory=$OPENAIR2_DIR $MAKE_IP_DRIVER_TARGET || exit 1
#bash_exec "make --directory=$OPENAIR_TARGETS/SIMU/USER $MAKE_LTE_ACCESS_STRATUM_TARGET "
make --directory=$OPENAIR_TARGETS/SIMU/USER $MAKE_LTE_ACCESS_STRATUM_TARGET || exit 1
bash_exec "insmod $OPENAIR2_DIR/NETWORK_DRIVER/UE_IP/$IP_DRIVER_NAME.ko"
bash_exec "ip route flush cache"
bash_exec "ip link set $LTEIF up"
sleep 1
bash_exec "ip addr add dev $LTEIF $UE_IPv4_CIDR"
bash_exec "ip addr add dev $LTEIF $UE_IPv6_CIDR"
sleep 1
bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
assert " `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
echo " Disabling reverse path filtering"
bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
assert " `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
bash_exec "ip route flush cache"
# Check table 200 lte in /etc/iproute2/rt_tables
fgrep lte /etc/iproute2/rt_tables
if [ $? -ne 0 ]; then
echo "200 lte " >> /etc/iproute2/rt_tables
fi
ip rule add fwmark 5 table lte
ip route add default dev $LTEIF table lte
ITTI_LOG_FILE=/tmp/itti_enb.$HOSTNAME.log
rotate_log_file $ITTI_LOG_FILE
#######################################################
# FIND CONFIG FILE
#######################################################
CONFIG_FILE=$THIS_SCRIPT_PATH/CONF/all.sfr.default_vswitch.conf
SEARCHED_CONFIG_FILE=$THIS_SCRIPT_PATH/CONF/all.sfr."$HOSTNAME"_vswitch.conf
if [ -f $SEARCHED_CONFIG_FILE ]; then
CONFIG_FILE=$SEARCHED_CONFIG_FILE
echo_warning "config file found is now $CONFIG_FILE"
else
echo_warning "config file $SEARCHED_CONFIG_FILE for host $HOSTNAME not found, trying default: $CONFIG_FILE"
if [ -f $CONFIG_FILE ]; then
echo_success "Default config file found: $CONFIG_FILE"
else
echo_error "Default config file not found, exiting"
exit 1
fi
fi
gdb --args $OPENAIR_TARGETS/SIMU/USER/oaisim -a -u1 -l7 -K $ITTI_LOG_FILE --enb-conf $CONFIG_FILE
targets/PROJECTS/GENERIC-LTE-EPC/start_lte-enb-vlan.bash deleted 100755 → 0
View file @ 9b9a6b63
#!/bin/bash
# Author Lionel GAUTHIER 02/03/2014
#
# This script start ENB+UE (all in one executable, on one host) with vlan setting
# MME+SP-GW executable have to be launched on an other host by your own (start_lte-epc-vlan.bash).
#
# hss.eur
# |
# +-----------+ +-----------+ v +----------+
# | eNB +------+ VLAN 1+------+ MME +----+ +---+ HSS |
# | |ethx.1+------------------+ethy.1| | +------+ | |
# | +------+ +------+ +----+ +---+ |
# | |ethx.2+-------+ | | +----------+
# | +------+ | +-+-------+-+
# | | | | s11mme|
# | | | +---+---+
# | | | (optional)| VLAN 3
# +-----------+ | +---+---+
# | | s11sgw| router.eur
# | +-+-------+-+ | +--------------+
# | | S+P-GW | v | ROUTER |
# | VLAN2 +------+ +-------+ +----+ +----+
# +----------+ethy.2| |sgi +-...-+ | | +---...Internet
# +------+ +-------+ +----+ +----+
# | | 11 VLANS | |
# +-----------+ ids=[5..15] +--------------+
#
###########################################################
# Parameters
###########################################################
declare MAKE_LTE_ACCESS_STRATUM_TARGET="DISABLE_XER_PRINT=1 ENABLE_ITTI=1 USE_MME=R10 NAS=1 Rel10=1"
declare MAKE_IP_DRIVER_TARGET="ue_ip.ko"
declare IP_DRIVER_NAME="ue_ip"
declare LTEIF="oip1"
declare UE_IPv4="10.0.0.8"
declare UE_IPv6="2001:1::8"
declare UE_IPv6_CIDR=$UE_IPv6"/64"
declare UE_IPv4_CIDR=$UE_IPv4"/24"
###########################################################
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/utils.bash
###########################################################
test_command_install_package "gccxml" "gccxml" "--force-yes"
test_command_install_package "vconfig" "vlan"
test_command_install_package "iptables" "iptables"
test_command_install_package "iperf" "iperf"
test_command_install_package "ip" "iproute"
test_command_install_package "tunctl" "uml-utilities"
test_command_install_lib "/usr/lib/libconfig.so" "libconfig-dev"
#######################################################
# FIND CONFIG FILE
#######################################################
CONFIG_FILE=$THIS_SCRIPT_PATH/CONF/enb.sfr.default.vlan.conf
SEARCHED_CONFIG_FILE=$THIS_SCRIPT_PATH/CONF/enb.sfr."$HOSTNAME".vlan.conf
if [ -f $SEARCHED_CONFIG_FILE ]; then
CONFIG_FILE=$SEARCHED_CONFIG_FILE
echo_warning "config file found is now $CONFIG_FILE"
else
echo_warning "config file $SEARCHED_CONFIG_FILE for host $HOSTNAME not found, trying default: $CONFIG_FILE"
if [ -f $CONFIG_FILE ]; then
echo_success "Default config file found: $CONFIG_FILE"
else
echo_error "Default config file not found, exiting"
exit 1
fi
fi
#######################################################
# SOURCE CONFIG FILE
#######################################################
rm -f /tmp/source.txt
VARIABLES="
ENB_INTERFACE_NAME_FOR_S1_MME\|\
ENB_IPV4_ADDRESS_FOR_S1_MME\|\
ENB_INTERFACE_NAME_FOR_S1U\|\
ENB_IPV4_ADDRESS_FOR_S1U"
VARIABLES=$(echo $VARIABLES | sed -e 's/\\r//g')
VARIABLES=$(echo $VARIABLES | tr -d ' ')
cat $CONFIG_FILE | grep -w "$VARIABLES"| tr -d " " | tr -d ";" > /tmp/source.txt
source /tmp/source.txt
declare ENB_IPV4_NETMASK_FOR_S1_MME=$( echo $ENB_IPV4_ADDRESS_FOR_S1_MME | cut -f2 -d '/')
declare ENB_IPV4_NETMASK_FOR_S1U=$( echo $ENB_IPV4_ADDRESS_FOR_S1U | cut -f2 -d '/')
ENB_IPV4_ADDRESS_FOR_S1_MME=$( echo $ENB_IPV4_ADDRESS_FOR_S1_MME | cut -f1 -d '/')
ENB_IPV4_ADDRESS_FOR_S1U=$( echo $ENB_IPV4_ADDRESS_FOR_S1U | cut -f1 -d '/')
#######################################################
# USIM, NVRAM files
#######################################################
if [ ! -f $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data ]; then
make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS veryveryclean
make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS PROCESS=UE
fi
if [ ! -f $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data ]; then
make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS veryveryclean
make --directory=$OPENAIRCN_DIR/NAS/EURECOM-NAS PROCESS=UE
fi
if [ ! -f .ue.nvram ]; then
# generate .ue_emm.nvram .ue.nvram
$OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/ue_data -g
fi
if [ ! -f .usim.nvram ]; then
# generate .usim.nvram
$OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/usim_data -g
fi
##################################################
# NETWORK TOPOLOGY
##################################################
clean_enb_vlan_network
build_enb_vlan_network
test_enb_vlan_network
##################################################
# LAUNCH eNB + UE executable
##################################################
echo "Bringup UE interface"
pkill oaisim
bash_exec "rmmod $IP_DRIVER_NAME" > /dev/null 2>&1
cecho "make $MAKE_IP_DRIVER_TARGET $MAKE_LTE_ACCESS_STRATUM_TARGET ....." $green
#bash_exec "make --directory=$OPENAIR2_DIR $MAKE_IP_DRIVER_TARGET "
make --directory=$OPENAIR2_DIR $MAKE_IP_DRIVER_TARGET || exit 1
#bash_exec "make --directory=$OPENAIR_TARGETS/SIMU/USER $MAKE_LTE_ACCESS_STRATUM_TARGET "
make --directory=$OPENAIR_TARGETS/SIMU/USER $MAKE_LTE_ACCESS_STRATUM_TARGET -j`grep -c ^processor /proc/cpuinfo ` || exit 1
bash_exec "insmod $OPENAIR2_DIR/NETWORK_DRIVER/UE_IP/$IP_DRIVER_NAME.ko"
bash_exec "ip route flush cache"
bash_exec "ip link set $LTEIF up"
sleep 1
#bash_exec "ip addr add dev $LTEIF $UE_IPv4_CIDR"
#bash_exec "ip addr add dev $LTEIF $UE_IPv6_CIDR"
sleep 1
bash_exec "sysctl -w net.ipv4.conf.all.log_martians=1"
assert " `sysctl -n net.ipv4.conf.all.log_martians` -eq 1" $LINENO
echo " Disabling reverse path filtering"
bash_exec "sysctl -w net.ipv4.conf.all.rp_filter=0"
assert " `sysctl -n net.ipv4.conf.all.rp_filter` -eq 0" $LINENO
bash_exec "ip route flush cache"
# Check table 200 lte in /etc/iproute2/rt_tables
fgrep lte /etc/iproute2/rt_tables > /dev/null
if [ $? -ne 0 ]; then
echo "200 lte " >> /etc/iproute2/rt_tables
fi
ip rule add fwmark 5 table lte
ip route add default dev $LTEIF table lte
ITTI_LOG_FILE=./itti_enb.$HOSTNAME.log
rotate_log_file $ITTI_LOG_FILE
nohup xterm -e $OPENAIRCN_DIR/NAS/EURECOM-NAS/bin/UserProcess &
gdb --args $OPENAIR_TARGETS/SIMU/USER/oaisim -a -u1 -l7 -K $ITTI_LOG_FILE --enb-conf $CONFIG_FILE
targets/PROJECTS/GENERIC-LTE-EPC/start_lte-epc-vlan.bash deleted 100755 → 0
View file @ 9b9a6b63
#!/bin/bash
# Author Lionel GAUTHIER 01/20/2014
#
# This script start MME+S/P-GW (all in one executable, on one host) with openvswitch setting
# eNB executable have to be launched on the same host by your own (start_lte-enb-ovs.bash).
#
# hss.eur
# |
# +-----------+ +-----------+ v +----------+
# | eNB +------+ VLAN 1+------+ MME +----+ +---+ HSS |
# | |ethx.1+------------------+ethy.1| | +------+ | |
# | +------+ +------+ +----+ +---+ |
# | |ethx.2+-------+ | | +----------+
# | +------+ | +-+-------+-+
# | | | | s11mme|
# | | | +---+---+
# | | | (optional)| VLAN 3
# +-----------+ | +---+---+
# | | s11sgw| router.eur
# | +-+-------+-+ | +--------------+
# | | S+P-GW | v | ROUTER |
# | VLAN2 +------+ +-------+ +----+ +----+
# +----------+ethy.2| |sgi +-...-+ | | +---...Internet
# +------+ +-------+ +----+ +----+
# | | 11 VLANS | |
# +-----------+ ids=[5..15] +--------------+
###########################################################
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/utils.bash
###########################################################
test_command_install_package "gccxml" "gccxml" "--force-yes"
test_command_install_package "gcc" "gcc" "--force-yes"
test_command_install_package "g++" "g++" "--force-yes"
test_command_install_package "automake" "automake" "--force-yes"
test_command_install_package "vconfig" "vlan" "--force-yes"
test_command_install_package "iptables" "iptables"
test_command_install_package "iperf" "iperf" "--force-yes"
test_command_install_package "ip" "iproute"
test_command_install_package "tunctl" "uml-utilities"
test_command_install_package "bison" "bison" "--force-yes"
test_command_install_package "flex" "flex" "--force-yes"
test_command_install_package "libtool" "libtool" "--force-yes"
test_command_install_lib "/usr/lib/libconfig.so" "libconfig-dev" "--force-yes"
#test_command_install_lib "/usr/lib/libsctp-dev.so" "libsctp-dev" "--force-yes"
test_command_install_lib "/usr/lib/libsctp.so" "libsctp1" "--force-yes"
#test_command_install_lib "/usr/lib/libpthread-stubs0-dev.so" "libpthread-stubs0-dev" "--force-yes"
if [ ! -d /usr/local/etc/freeDiameter ]
then
cd $OPENAIRCN_DIR/S6A/freediameter && ./install_freediameter.sh
else
echo_success "freediameter is installed"
fi
test_command_install_script "asn1c" "$OPENAIRCN_DIR/SCRIPTS/install_asn1c_0.9.24.modified.bash"
# One mor check about version of asn1c
ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE="ASN.1 Compiler, v0.9.24"
ASN1C_COMPILER_VERSION_MESSAGE=`asn1c -h 2>&1 | grep -i ASN\.1\ Compiler`
##ASN1C_COMPILER_VERSION_MESSAGE=`trim $ASN1C_COMPILER_VERSION_MESSAGE`
if [ "$ASN1C_COMPILER_VERSION_MESSAGE" != "$ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE" ]
then
diff <(echo -n "$ASN1C_COMPILER_VERSION_MESSAGE") <(echo -n "$ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE")
echo_error "Version of asn1c is not the required one, do you want to install the required one (overwrite installation) ? (Y/n)"
echo_error "$ASN1C_COMPILER_VERSION_MESSAGE"
while read -r -n 1 -s answer; do
if [[ $answer = [YyNn] ]]; then
[[ $answer = [Yy] ]] && $OPENAIRCN_DIR/SCRIPTS/install_asn1c_0.9.24.modified.bash
[[ $answer = [Nn] ]] && echo_error "Version of asn1c is not the required one, exiting." && exit 1
break
fi
done
fi
# May we have booted on a new kernel, not the one when we build vswitch kernel module
if [ ! -f /lib/modules/`uname -r`/extra/openvswitch.ko ]; then
$OPENAIRCN_DIR/SCRIPTS/install_openvswitch1.9.0.bash
fi
##################################
# Get or set OBJ DIR and compile #
##################################
# TEST IF EXIST
cd $OPENAIRCN_DIR
OBJ_DIR=`find . -maxdepth 1 -type d -iname obj*`
if [ -n "$OBJ_DIR" ]
then
OBJ_DIR=`basename $OBJ_DIR`
if [ ! -f $OBJ_DIR/Makefile ]
then
autoreconf -i -f
cd ./$OBJ_DIR
echo_success "Invoking configure"
../configure --enable-standalone-epc --enable-raw-socket-for-sgi --disable-s11 LDFLAGS=-L/usr/local/lib
else
cd ./$OBJ_DIR
fi
else
OBJ_DIR="objs"
bash_exec "mkdir -m 777 ./$OBJ_DIR"
echo_success "Created $OBJ_DIR directory"
echo_success "Invoking autogen"
bash_exec "./autogen.sh"
cd ./$OBJ_DIR
echo_success "Invoking configure"
../configure --enable-standalone-epc --enable-raw-socket-for-sgi --disable-s11 LDFLAGS=-L/usr/local/lib
fi
pkill oai_epc
if [ -f Makefile ]
then
echo_success "Compiling..."
make CODE_PDN_WITHOUT_S11=1 -j `cat /proc/cpuinfo | grep processor | wc -l`
if [ $? -ne 0 ]; then
echo_error "Build failed, exiting"
exit 1
fi
else
echo_error "Configure failed, exiting"
exit 1
fi
cd $OPENAIRCN_DIR
#######################################################
# FIND CONFIG FILE
#######################################################
CONFIG_FILE=$THIS_SCRIPT_PATH/CONF/epc.sfr.default.vlan.conf
SEARCHED_CONFIG_FILE=$THIS_SCRIPT_PATH/CONF/epc.sfr."$HOSTNAME".vlan.conf
if [ -f $SEARCHED_CONFIG_FILE ]; then
CONFIG_FILE=$SEARCHED_CONFIG_FILE
echo_warning "config file found is now $CONFIG_FILE"
else
echo_warning "config file $SEARCHED_CONFIG_FILE for host $HOSTNAME not found, trying default: $CONFIG_FILE"
if [ -f $CONFIG_FILE ]; then
echo_success "Default config file found: $CONFIG_FILE"
else
echo_error "Default config file not found, exiting"
exit 1
fi
fi
#######################################################
# SOURCE CONFIG FILE
#######################################################
rm -f /tmp/source.txt
VARIABLES="
MME_INTERFACE_NAME_FOR_S1_MME\|\
MME_IPV4_ADDRESS_FOR_S1_MME\|\
MME_INTERFACE_NAME_FOR_S11_MME\|\
MME_IPV4_ADDRESS_FOR_S11_MME\|\
SGW_INTERFACE_NAME_FOR_S11\|\
SGW_IPV4_ADDRESS_FOR_S11\|\
SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP\|\
SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP\|\
SGW_INTERFACE_NAME_FOR_S5_S8_UP\|\
SGW_IPV4_ADDRESS_FOR_S5_S8_UP\|\
PGW_INTERFACE_NAME_FOR_S5_S8\|\
PGW_IPV4_ADDRESS_FOR_S5_S8\|\
PGW_INTERFACE_NAME_FOR_SGI\|\
PGW_IPV4_ADDR_FOR_SGI"
VARIABLES=$(echo $VARIABLES | sed -e 's/\\r//g')
VARIABLES=$(echo $VARIABLES | tr -d ' ')
cat $CONFIG_FILE | grep -w "$VARIABLES"| tr -d " " | tr -d ";" > /tmp/source.txt
source /tmp/source.txt
declare MME_IPV4_NETMASK_FOR_S1_MME=$( echo $MME_IPV4_ADDRESS_FOR_S1_MME | cut -f2 -d '/')
#declare MME_IPV4_NETMASK_FOR_S11_MME=$( echo $MME_IPV4_ADDRESS_FOR_S11_MME | cut -f2 -d '/')
#declare SGW_IPV4_NETMASK_FOR_S11=$( echo $SGW_IPV4_ADDRESS_FOR_S11 | cut -f2 -d '/')
declare SGW_IPV4_NETMASK_FOR_S1U_S12_S4_UP=$(echo $SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP | cut -f2 -d '/')
#declare SGW_IPV4_NETMASK_FOR_S5_S8_UP=$( echo $SGW_IPV4_ADDRESS_FOR_S5_S8_UP | cut -f2 -d '/')
#declare PGW_IPV4_NETMASK_FOR_S5_S8=$( echo $PGW_IPV4_ADDRESS_FOR_S5_S8 | cut -f2 -d '/')
declare PGW_IPV4_NETMASK_FOR_SGI=$( echo $PGW_IPV4_ADDR_FOR_SGI | cut -f2 -d '/')
#ENB_IPV4_ADDRESS_FOR_S1_MME=$( echo $ENB_IPV4_ADDRESS_FOR_S1_MME | cut -f1 -d '/')
#ENB_IPV4_ADDRESS_FOR_S1U=$( echo $ENB_IPV4_ADDRESS_FOR_S1U | cut -f1 -d '/')
MME_IPV4_ADDRESS_FOR_S1_MME=$( echo $MME_IPV4_ADDRESS_FOR_S1_MME | cut -f1 -d '/')
#MME_IPV4_ADDRESS_FOR_S11_MME=$( echo $MME_IPV4_ADDRESS_FOR_S11_MME | cut -f1 -d '/')
#SGW_IPV4_ADDRESS_FOR_S11=$( echo $SGW_IPV4_ADDRESS_FOR_S11 | cut -f1 -d '/')
SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP=$( echo $SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP | cut -f1 -d '/')
#SGW_IPV4_ADDRESS_FOR_S5_S8_UP=$( echo $SGW_IPV4_ADDRESS_FOR_S5_S8_UP | cut -f1 -d '/')
#PGW_IPV4_ADDRESS_FOR_S5_S8=$( echo $PGW_IPV4_ADDRESS_FOR_S5_S8 | cut -f1 -d '/')
PGW_IPV4_ADDR_FOR_SGI=$( echo $PGW_IPV4_ADDR_FOR_SGI | cut -f1 -d '/')
clean_epc_vlan_network
build_mme_spgw_vlan_network
#test_epc_vlan_network
##################################################..
# LAUNCH MME + S+P-GW executable
##################################################
cd $OPENAIRCN_DIR/$OBJ_DIR
ITTI_LOG_FILE=./itti_mme.log
rotate_log_file $ITTI_LOG_FILE
STDOUT_LOG_FILE=./stdout_mme.log
rotate_log_file $STDOUT_LOG_FILE
$OPENAIRCN_DIR/$OBJ_DIR/OAI_EPC/oai_epc -K $ITTI_LOG_FILE -c $CONFIG_FILE | tee $STDOUT_LOG_FILE 2>&1
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment