Skip to content

O
OpenXG-RAN
Commit 53db39b8 authored by laurent's avatar laurent
Browse files
Options

split 7.3 ready for merge

parent 3d15918c
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1042 additions and 964 deletions
cmake_targets/CMakeLists.txt
View file @ 53db39b8
......@@ -1181,9 +1181,6 @@ set(SCHED_SRC
add_library(SCHED_LIB ${SCHED_SRC})
add_dependencies(SCHED_LIB rrc_flag)
add_library(SCHED_LIB_FS6 ${SCHED_SRC})
target_compile_definitions(SCHED_LIB_FS6 PRIVATE FS6=1)
add_dependencies(SCHED_LIB_FS6 rrc_flag)
set(SCHED_NR_SRC
${OPENAIR1_DIR}/SCHED_NR/fapi_nr_l1.c
${OPENAIR1_DIR}/SCHED_NR/phy_procedures_nr_common.c
......@@ -1563,8 +1560,6 @@ endif ()
add_library(PHY_COMMON ${PHY_SRC_COMMON})
add_dependencies(PHY_COMMON rrc_flag)
add_library(PHY ${PHY_SRC})
add_library(PHY_FS6 ${PHY_SRC})
target_compile_definitions(PHY_FS6 PRIVATE FS6=1)
add_dependencies(PHY rrc_flag)
add_library(PHY_UE ${PHY_SRC_UE})
......@@ -2485,13 +2480,11 @@ target_link_libraries (lte-softmodem ${T_LIB})
add_executable(ocp-softmodem
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_DIR}/executables/main-ocp.c
${OPENAIR_DIR}/common/utils/threadPool/thread-pool.c
${OPENAIR_DIR}/executables/softmodem-common.c
${OPENAIR_DIR}/executables/main-fs6.c
${OPENAIR_DIR}/executables/transport_split.c
${OPENAIR_TARGETS}/RT/USER/lte-softmodem.c
${OPENAIR2_DIR}/ENB_APP/NB_IoT_interface.c
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR_TARGETS}/COMMON/create_tasks.c
......@@ -2511,7 +2504,6 @@ add_executable(ocp-softmodem
${CONFIG_SOURCES}
${SHLIB_LOADER_SOURCES}
)
target_compile_definitions(ocp-softmodem PRIVATE FS6=1)
add_dependencies(ocp-softmodem rrc_flag s1ap_flag x2_flag)
target_link_libraries (ocp-softmodem
......
common/utils/system.c
View file @ 53db39b8
......@@ -243,6 +243,8 @@ void configure_linux(void) {
// Set CPU frequency to it's maximum
if ( 0 != system("for d in /sys/devices/system/cpu/cpu[0-9]*; do cat $d/cpufreq/cpuinfo_max_freq > $d/cpufreq/scaling_min_freq; done"))
LOG_W(HW,"Can't set cpu frequency\n");
LOG_E(HW,"Can't set cpu frequency\n");
mlockall(MCL_CURRENT | MCL_FUTURE);
}
SystemX-tutorial-design.md → doc/SystemX-tutorial-design.md
View file @ 53db39b8
......@@ -258,26 +258,22 @@ lte-softmodem.
The functionality and parameters is the same, enhanced with FS6 mode.
The environment variable “fs6” enables the fs6 mode and decided to be cu
or du from the fs6 variable content.
A example configuration file is: $OPENAIR_DIR/enb.fs6.example.conf
The IP addresses in this file should be updated for each network.
The end line option “--split73” enables the fs6 (also called split 7.3) mode and decided to be cu or du.
Example:
`fs6=cu ./ocp-softmodem -O $OPENAIR_DIR/enb.fs6.example.conf --rfsim --log_config.phy_log_level debug
./ocp-softmodem -O $OPENAIR_DIR/enb.fs6.example.conf --rfsim --log_config.phy_log_level debug --split73 cu:127.0.0.1
`
Run the CU init of the split 6 eNB, that will call du on 127.0.0.1 address
Run the CU init of the split 6 eNB.
./ocp-softmodem -O $OPENAIR_DIR/enb.fs6.example.conf --rfsim --log_config.phy_log_level debug --split73 du:127.0.0.1
`fs6=du ./ocp-softmodem -O $OPENAIR_DIR/enb.fs6.example.conf --rfsim --log_config.phy_log_level debug
will run the du, calling the cu on 127.0.0.1
`
If the CU and the DU are not on the same machine, the remote address of each side need to be specified as per this example
`fs6=du FS6_REMOTE_IP=192.168.2.211 ./ocp-softmodem -O $OPENAIR_DIR/enb.fs6.example.conf --rfsim --log_config.phy_log_level debug
./ocp-softmodem -O $OPENAIR_DIR/enb.fs6.example.conf --rfsim --log_config.phy_log_level debug --split73 du:192.168.1.55
`
runs the functional split 6 DU
`./lte-uesoftmodem -C 2685000000 -r 50 --rfsim --rfsimulator.serveraddr 192.168.1.1 -d
......@@ -285,10 +281,7 @@ runs the functional split 6 DU
Runs the UE (to have the UE signal scope, compile it with make uescope)
CU and DU IP address and port are configurable in the eNB configuration
file (as X2, GTP, … interfaces).
CU+DU+UE can run with option --noS1 to avoid to use a EPC.
CU+DU+UE can run with option --noS1 to avoid to use a EPC and/or with --rfsim to simulate RF board
##5G and F1
......
enb.fs6.example.conf deleted 100644 → 0
View file @ 3d15918c
This diff is collapsed.
executables/main-fs6.c
View file @ 53db39b8
This diff is collapsed.
executables/main-ocp.c
View file @ 53db39b8
This diff is collapsed.
executables/nr-gnb.c
View file @ 53db39b8
This diff is collapsed.
executables/nr-ru.c
View file @ 53db39b8
......@@ -92,7 +92,7 @@ unsigned short config_frames[4] = {2,9,11,13};
static int DEFBANDS[] = {7};
static int DEFENBS[] = {0};
static int DEFBFW[] = {0x00007fff};
//static int DEFNRBANDS[] = {7};
//static int DEFGNBS[] = {0};
......@@ -712,7 +712,7 @@ void rx_rf(RU_t *ru,int *frame,int *slot) {
}
void tx_rf(RU_t *ru,int frame,int slot, uint64_t timestamp) {
void tx_rf(RU_t *ru,int frame,int slot, uint64_t timestamp) {
RU_proc_t *proc = &ru->proc;
NR_DL_FRAME_PARMS *fp = ru->nr_frame_parms;
//nfapi_nr_config_request_t *cfg = &ru->gNB_list[0]->gNB_config;
......@@ -758,7 +758,7 @@ void tx_rf(RU_t *ru,int frame,int slot, uint64_t timestamp) {
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_RU, frame );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TTI_NUMBER_TX0_RU, slot );
for (i=0; i<ru->nb_tx; i++){
for (i=0; i<ru->nb_tx; i++) {
txp[i] = (void *)&ru->common.txdata[i][(slot*fp->samples_per_slot)-sf_extension];
}
......@@ -870,7 +870,7 @@ static void *ru_thread_prach( void *param ) {
0,0
);
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_RU_PRACH_RX, 0 );*/
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_RU_PRACH_RX, 0 );*/
if (release_thread(&proc->mutex_prach,&proc->instance_cnt_prach,"ru_prach_thread") < 0) break;
}
......@@ -1097,16 +1097,16 @@ void fill_rf_config(RU_t *ru, char *rf_config_file) {
}
} else if(N_RB == 106) {
if (fp->threequarter_fs) {
cfg->sample_rate=46.08e6;
cfg->samples_per_frame = 460800;
cfg->tx_bw = 40e6;
cfg->rx_bw = 40e6;
cfg->sample_rate=46.08e6;
cfg->samples_per_frame = 460800;
cfg->tx_bw = 40e6;
cfg->rx_bw = 40e6;
}
else {
cfg->sample_rate=61.44e6;
cfg->samples_per_frame = 614400;
cfg->tx_bw = 40e6;
cfg->rx_bw = 40e6;
cfg->sample_rate=61.44e6;
cfg->samples_per_frame = 614400;
cfg->tx_bw = 40e6;
cfg->rx_bw = 40e6;
}
} else {
AssertFatal(0==1,"N_RB %d not yet supported for numerology %d\n",N_RB,mu);
......@@ -1210,7 +1210,7 @@ static void *ru_stats_thread(void *param) {
if (ru->feprx) print_meas(&ru->ofdm_demod_stats,"feprx",NULL,NULL);
if (ru->feptx_ofdm){
if (ru->feptx_ofdm) {
print_meas(&ru->precoding_stats,"feptx_prec",NULL,NULL);
print_meas(&ru->txdataF_copy_stats,"txdataF_copy",NULL,NULL);
print_meas(&ru->ofdm_mod_stats,"feptx_ofdm",NULL,NULL);
......@@ -1219,7 +1219,7 @@ static void *ru_stats_thread(void *param) {
if (ru->fh_north_asynch_in) print_meas(&ru->rx_fhaul,"rx_fhaul",NULL,NULL);
print_meas(&ru->tx_fhaul,"tx_fhaul",NULL,NULL);
print_meas(&ru->tx_fhaul,"tx_fhaul",NULL,NULL);
if (ru->fh_north_out) {
print_meas(&ru->compression,"compression",NULL,NULL);
print_meas(&ru->transport,"transport",NULL,NULL);
......@@ -1346,7 +1346,7 @@ static void *ru_thread_tx( void *param ) {
if (L1_proc->instance_cnt_RUs == -1) {
L1_proc->instance_cnt_RUs = 0;
AssertFatal(pthread_cond_signal(&L1_proc->cond_RUs) == 0,
"ERROR pthread_cond_signal for gNB_L1_thread\n");
"ERROR pthread_cond_signal for gNB_L1_thread\n");
} //else AssertFatal(1==0,"gNB TX thread is not ready\n");
ret = pthread_mutex_unlock(&L1_proc->mutex_RUs_tx);
AssertFatal(ret == 0,"mutex_unlock returns %d\n",ret);
......@@ -1371,7 +1371,7 @@ static void *ru_thread( void *param ) {
int print_frame = 8;
int i = 0;
int aa;
// set default return value
// set default return value
ru_thread_status = 0;
// set default return value
......@@ -1499,9 +1499,9 @@ static void *ru_thread( void *param ) {
LOG_D(PHY,"RU proc: frame_rx = %d, tti_rx = %d\n", proc->frame_rx, proc->tti_rx);
LOG_D(PHY,"Copying rxdataF from RU to gNB\n");
for (aa=0;aa<ru->nb_rx;aa++)
memcpy((void*)RC.gNB[0][0]->common_vars.rxdataF[aa],
(void*)ru->common.rxdataF[aa], fp->symbols_per_slot*fp->ofdm_symbol_size*sizeof(int32_t));
for (aa=0; aa<ru->nb_rx; aa++)
memcpy((void *)RC.gNB[0][0]->common_vars.rxdataF[aa],
(void *)ru->common.rxdataF[aa], fp->symbols_per_slot*fp->ofdm_symbol_size*sizeof(int32_t));
// At this point, all information for subframe has been received on FH interface
......@@ -2260,7 +2260,7 @@ void RCconfig_RU(void)
}
}
else {
RC.ru[j]->openair0_cfg.clock_source = unset;
RC.ru[j]->openair0_cfg.clock_source = unset;
}
if (strcmp(*(RUParamList.paramarray[j][RU_LOCAL_RF_IDX].strptr), "yes") == 0) {
......
executables/nr-softmodem.c
View file @ 53db39b8
......@@ -176,6 +176,10 @@ uint32_t target_ul_mcs = 20;
uint32_t timing_advance = 0;
uint64_t num_missed_slots=0; // counter for the number of missed slots
int split73=0;
void sendFs6Ul(PHY_VARS_eNB *eNB, int UE_id, int harq_pid, int segmentID, int16_t *data, int dataLen, int r_offset) {
AssertFatal(false, "Must not be called in this context\n");
}
extern void reset_opp_meas(void);
extern void print_opp_meas(void);
......@@ -721,13 +725,9 @@ int restart_L1L2(module_id_t gnb_id) {
memcpy(&ru->nr_frame_parms, &RC.gNB[gnb_id][0]->frame_parms, sizeof(NR_DL_FRAME_PARMS));
set_function_spec_param(RC.ru[gnb_id]);
LOG_I(GNB_APP, "attempting to create ITTI tasks\n");
if (itti_create_task (TASK_RRC_ENB, rrc_enb_task, NULL) < 0) {
LOG_E(RRC, "Create task for RRC eNB failed\n");
return -1;
} else {
LOG_I(RRC, "Re-created task for RRC gNB successfully\n");
}
// No more rrc thread, as many race conditions are hidden behind
rrc_enb_init();
itti_mark_task_ready(TASK_RRC_ENB);
if (itti_create_task (TASK_L2L1, l2l1_task, NULL) < 0) {
LOG_E(PDCP, "Create task for L2L1 failed\n");
......@@ -771,23 +771,23 @@ static void wait_nfapi_init(char *thread_name) {
void init_pdcp(void) {
//if (!NODE_IS_DU(RC.rrc[0]->node_type)) {
pdcp_layer_init();
uint32_t pdcp_initmask = (IS_SOFTMODEM_NOS1) ?
(PDCP_USE_NETLINK_BIT | LINK_ENB_PDCP_TO_IP_DRIVER_BIT) : LINK_ENB_PDCP_TO_GTPV1U_BIT;
pdcp_layer_init();
uint32_t pdcp_initmask = (IS_SOFTMODEM_NOS1) ?
(PDCP_USE_NETLINK_BIT | LINK_ENB_PDCP_TO_IP_DRIVER_BIT) : LINK_ENB_PDCP_TO_GTPV1U_BIT;
if (IS_SOFTMODEM_NOS1){
printf("IS_SOFTMODEM_NOS1 option enabled \n");
pdcp_initmask = pdcp_initmask | ENB_NAS_USE_TUN_BIT | SOFTMODEM_NOKRNMOD_BIT ;
}
if (IS_SOFTMODEM_NOS1) {
printf("IS_SOFTMODEM_NOS1 option enabled \n");
pdcp_initmask = pdcp_initmask | ENB_NAS_USE_TUN_BIT | SOFTMODEM_NOKRNMOD_BIT ;
}
pdcp_module_init(pdcp_initmask);
pdcp_module_init(pdcp_initmask);
/*if (NODE_IS_CU(RC.rrc[0]->node_type)) {
pdcp_set_rlc_data_req_func((send_rlc_data_req_func_t)proto_agent_send_rlc_data_req);
} else {*/
pdcp_set_rlc_data_req_func((send_rlc_data_req_func_t) rlc_data_req);
pdcp_set_pdcp_data_ind_func((pdcp_data_ind_func_t) pdcp_data_ind);
//}
/*if (NODE_IS_CU(RC.rrc[0]->node_type)) {
pdcp_set_rlc_data_req_func((send_rlc_data_req_func_t)proto_agent_send_rlc_data_req);
} else {*/
pdcp_set_rlc_data_req_func((send_rlc_data_req_func_t) rlc_data_req);
pdcp_set_pdcp_data_ind_func((pdcp_data_ind_func_t) pdcp_data_ind);
//}
/*} else {
pdcp_set_pdcp_data_ind_func((pdcp_data_ind_func_t) proto_agent_send_pdcp_data_ind);
}*/
......@@ -841,7 +841,7 @@ int main( int argc, char **argv )
MSC_INIT(MSC_E_UTRAN, THREAD_MAX+TASK_MAX);
#endif
init_opt();
init_opt();
#ifdef PDCP_USE_NETLINK
......@@ -857,7 +857,7 @@ init_opt();
LOG_I(HW, "Version: %s\n", PACKAGE_VERSION);
if(IS_SOFTMODEM_NOS1)
init_pdcp();
init_pdcp();
#if defined(ENABLE_ITTI)
......@@ -883,37 +883,37 @@ init_opt();
mlockall(MCL_CURRENT | MCL_FUTURE);
pthread_cond_init(&sync_cond,NULL);
pthread_mutex_init(&sync_mutex, NULL);
/*#ifdef XFORMS
int UE_id;
if (do_forms==1) {
fl_initialize (&argc, argv, NULL, 0, 0);
form_stats_l2 = create_form_stats_form();
fl_show_form (form_stats_l2->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "l2 stats");
form_stats = create_form_stats_form();
fl_show_form (form_stats->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "stats");
/*#ifdef XFORMS
int UE_id;
for(UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
form_gnb[CC_id][UE_id] = create_phy_scope_gnb();
sprintf (title, "LTE UL SCOPE eNB for CC_id %d, UE %d",CC_id,UE_id);
fl_show_form (form_gnb[CC_id][UE_id]->phy_scope_gnb, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
if (otg_enabled) {
fl_set_button(form_gnb[CC_id][UE_id]->button_0,1);
fl_set_object_label(form_gnb[CC_id][UE_id]->button_0,"DL Traffic ON");
} else {
fl_set_button(form_gnb[CC_id][UE_id]->button_0,0);
fl_set_object_label(form_gnb[CC_id][UE_id]->button_0,"DL Traffic OFF");
}
} // CC_id
} // UE_id
if (do_forms==1) {
fl_initialize (&argc, argv, NULL, 0, 0);
form_stats_l2 = create_form_stats_form();
fl_show_form (form_stats_l2->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "l2 stats");
form_stats = create_form_stats_form();
fl_show_form (form_stats->stats_form, FL_PLACE_HOTSPOT, FL_FULLBORDER, "stats");
for(UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
form_gnb[CC_id][UE_id] = create_phy_scope_gnb();
sprintf (title, "LTE UL SCOPE eNB for CC_id %d, UE %d",CC_id,UE_id);
fl_show_form (form_gnb[CC_id][UE_id]->phy_scope_gnb, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
if (otg_enabled) {
fl_set_button(form_gnb[CC_id][UE_id]->button_0,1);
fl_set_object_label(form_gnb[CC_id][UE_id]->button_0,"DL Traffic ON");
} else {
fl_set_button(form_gnb[CC_id][UE_id]->button_0,0);
fl_set_object_label(form_gnb[CC_id][UE_id]->button_0,"DL Traffic OFF");
}
} // CC_id
} // UE_id
threadCreate(&forms_thread, scope_thread, NULL, "scope", -1, OAI_PRIORITY_RT_LOW);
printf("Scope thread created, ret=%d\n",ret);
}
threadCreate(&forms_thread, scope_thread, NULL, "scope", -1, OAI_PRIORITY_RT_LOW);
printf("Scope thread created, ret=%d\n",ret);
}
#endif*/
#endif*/
usleep(10*1000);
if (nfapi_mode) {
......@@ -1018,27 +1018,27 @@ init_opt();
printf("Terminating application - oai_exit=%d\n",oai_exit);
#endif
// stop threads
/*#ifdef XFORMS
/*#ifdef XFORMS
printf("waiting for XFORMS thread\n");
printf("waiting for XFORMS thread\n");
if (do_forms==1) {
pthread_join(forms_thread,&status);
fl_hide_form(form_stats->stats_form);
fl_free_form(form_stats->stats_form);
if (do_forms==1) {
pthread_join(forms_thread,&status);
fl_hide_form(form_stats->stats_form);
fl_free_form(form_stats->stats_form);
fl_hide_form(form_stats_l2->stats_form);
fl_free_form(form_stats_l2->stats_form);
fl_hide_form(form_stats_l2->stats_form);
fl_free_form(form_stats_l2->stats_form);
for(UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
fl_hide_form(form_enb[CC_id][UE_id]->phy_scope_gNB);
fl_free_form(form_enb[CC_id][UE_id]->phy_scope_gNB);
}
}
}
for(UE_id=0; UE_id<scope_enb_num_ue; UE_id++) {
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
fl_hide_form(form_enb[CC_id][UE_id]->phy_scope_gNB);
fl_free_form(form_enb[CC_id][UE_id]->phy_scope_gNB);
}
}
}
#endif*/
#endif*/
printf("stopping MODEM threads\n");
// cleanup
stop_gNB(NB_gNB_INST);
......
executables/nr-ue.c
View file @ 53db39b8
......@@ -148,7 +148,7 @@ PHY_VARS_NR_UE *init_nr_ue_vars(NR_DL_FRAME_PARMS *frame_parms,
ue->Mod_id = UE_id;
ue->mac_enabled = 1;
// initialize all signal buffers
// initialize all signal buffers
init_nr_ue_signal(ue,1,abstraction_flag);
// intialize transport
......@@ -380,7 +380,7 @@ void processSlotRX( PHY_VARS_NR_UE *UE, UE_nr_rxtx_proc_t *proc) {
scheduled_response.CC_id = 0;
scheduled_response.frame = proc->frame_rx;
scheduled_response.slot = proc->nr_tti_rx;
//--------------------------Temporary configuration-----------------------------//
//--------------------------Temporary configuration-----------------------------//
n_rnti = 0x1234;
nb_rb = 50;
......@@ -391,7 +391,7 @@ void processSlotRX( PHY_VARS_NR_UE *UE, UE_nr_rxtx_proc_t *proc) {
mcs = 9;
harq_pid = 0;
rvidx = 0;
//------------------------------------------------------------------------------//
//------------------------------------------------------------------------------//
scheduled_response.ul_config->sfn_slot = NR_UPLINK_SLOT;
scheduled_response.ul_config->number_pdus = 1;
......@@ -416,18 +416,18 @@ void processSlotRX( PHY_VARS_NR_UE *UE, UE_nr_rxtx_proc_t *proc) {
LOG_D(PHY,"phy_procedures_nrUE_RX: slot:%d, time %lu\n", proc->nr_tti_rx, (rdtsc()-a)/3500);
//printf(">>> nr_ue_pdcch_procedures ended\n");
#endif
if(IS_SOFTMODEM_NOS1){ //&& proc->nr_tti_rx==1
//Hardcoded rnti value
protocol_ctxt_t ctxt;
PROTOCOL_CTXT_SET_BY_MODULE_ID(&ctxt, UE->Mod_id, ENB_FLAG_NO,
0x1234, proc->frame_rx,
proc->nr_tti_rx, 0);
pdcp_run(&ctxt);
pdcp_fifo_flush_sdus(&ctxt);
}
if(IS_SOFTMODEM_NOS1) { //&& proc->nr_tti_rx==1
//Hardcoded rnti value
protocol_ctxt_t ctxt;
PROTOCOL_CTXT_SET_BY_MODULE_ID(&ctxt, UE->Mod_id, ENB_FLAG_NO,
0x1234, proc->frame_rx,
proc->nr_tti_rx, 0);
pdcp_run(&ctxt);
pdcp_fifo_flush_sdus(&ctxt);
}
}
// no UL for now
// no UL for now
/*
if (UE->mac_enabled==1) {
......@@ -465,7 +465,7 @@ void UE_processing(void *arg) {
PHY_VARS_NR_UE *UE = rxtxD->UE;
processSlotRX(UE, proc);
uint8_t gNB_id = 0;
// params for UL time alignment procedure
// params for UL time alignment procedure
NR_UL_TIME_ALIGNMENT_t *ul_time_alignment = &UE->ul_time_alignment[gNB_id];
uint8_t numerology = UE->frame_parms.numerology_index;
......@@ -475,24 +475,24 @@ void UE_processing(void *arg) {
//printf(">>> mac ended\n");
// Prepare the future Tx data
/*
#ifndef NO_RAT_NR
/*
#ifndef NO_RAT_NR
if (slot_select_nr(&UE->frame_parms, proc->frame_tx, proc->nr_tti_tx) & NR_UPLINK_SLOT)
#else
if ((subframe_select( &UE->frame_parms, proc->subframe_tx) == SF_UL) ||
(UE->frame_parms.frame_type == FDD) )
#endif
*/
if (slot_select_nr(&UE->frame_parms, proc->frame_tx, proc->nr_tti_tx) & NR_UPLINK_SLOT)
#else
if ((subframe_select( &UE->frame_parms, proc->subframe_tx) == SF_UL) ||
(UE->frame_parms.frame_type == FDD) )
#endif
*/
/* UL time alignment
// If the current tx frame and slot match the TA configuration in ul_time_alignment
// then timing advance is processed and set to be applied in the next UL transmission */
if (UE->mac_enabled == 1) {
if (frame_tx == ul_time_alignment->ta_frame && slot_tx == ul_time_alignment->ta_slot){
if (frame_tx == ul_time_alignment->ta_frame && slot_tx == ul_time_alignment->ta_slot) {
LOG_D(PHY,"Applying timing advance -- frame %d -- slot %d\n", frame_tx, slot_tx);
//if (nfapi_mode!=3){
//if (nfapi_mode!=3){
nr_process_timing_advance(UE->Mod_id, UE->CC_id, ul_time_alignment->ta_command, numerology, bwp_ul_NB_RB);
ul_time_alignment->ta_frame = -1;
......@@ -501,7 +501,7 @@ void UE_processing(void *arg) {
}
}
if (proc->nr_tti_tx == NR_UPLINK_SLOT || UE->frame_parms.frame_type == FDD){
if (proc->nr_tti_tx == NR_UPLINK_SLOT || UE->frame_parms.frame_type == FDD) {
thread_id = PHY_vars_UE_g[UE->Mod_id][0]->current_thread_id[proc->nr_tti_tx];
......@@ -566,7 +566,7 @@ void trashFrame(PHY_VARS_NR_UE *UE, openair0_timestamp *timestamp) {
UE->frame_parms.samples_per_subframe,
UE->frame_parms.nb_antennas_rx);
if (IS_SOFTMODEM_RFSIM ) {
usleep(1000); // slow down, as would do actual rf to let cpu for the synchro thread
usleep(1000); // slow down, as would do actual rf to let cpu for the synchro thread
}
}
......@@ -579,24 +579,24 @@ void trashFrame(PHY_VARS_NR_UE *UE, openair0_timestamp *timestamp) {
void syncInFrame(PHY_VARS_NR_UE *UE, openair0_timestamp *timestamp) {
LOG_I(PHY,"Resynchronizing RX by %d samples (mode = %d)\n",UE->rx_offset,UE->mode);
void *dummy_tx[UE->frame_parms.nb_antennas_tx];
LOG_I(PHY,"Resynchronizing RX by %d samples (mode = %d)\n",UE->rx_offset,UE->mode);
void *dummy_tx[UE->frame_parms.nb_antennas_tx];
for (int i=0; i<UE->frame_parms.nb_antennas_tx; i++)
dummy_tx[i]=malloc16_clear(UE->frame_parms.samples_per_subframe*4);
for ( int size=UE->rx_offset ; size > 0 ; size -= UE->frame_parms.samples_per_subframe ) {
int unitTransfer=size>UE->frame_parms.samples_per_subframe ? UE->frame_parms.samples_per_subframe : size ;
AssertFatal(unitTransfer ==
UE->rfdevice.trx_read_func(&UE->rfdevice,
timestamp,
(void **)UE->common_vars.rxdata,
unitTransfer,
UE->frame_parms.nb_antennas_rx),"");
}
for (int i=0; i<UE->frame_parms.nb_antennas_tx; i++)
dummy_tx[i]=malloc16_clear(UE->frame_parms.samples_per_subframe*4);
for (int i=0; i<UE->frame_parms.nb_antennas_tx; i++)
free(dummy_tx[i]);
for ( int size=UE->rx_offset ; size > 0 ; size -= UE->frame_parms.samples_per_subframe ) {
int unitTransfer=size>UE->frame_parms.samples_per_subframe ? UE->frame_parms.samples_per_subframe : size ;
AssertFatal(unitTransfer ==
UE->rfdevice.trx_read_func(&UE->rfdevice,
timestamp,
(void **)UE->common_vars.rxdata,
unitTransfer,
UE->frame_parms.nb_antennas_rx),"");
}
for (int i=0; i<UE->frame_parms.nb_antennas_tx; i++)
free(dummy_tx[i]);
}
......@@ -727,7 +727,7 @@ void *UE_thread(void *arg) {
#ifdef OAI_ADRV9371_ZC706
/*uint32_t total_gain_dB_prev = 0;
if (total_gain_dB_prev != UE->rx_total_gain_dB) {
total_gain_dB_prev = UE->rx_total_gain_dB;
total_gain_dB_prev = UE->rx_total_gain_dB;
openair0_cfg[0].rx_gain[0] = UE->rx_total_gain_dB;
UE->rfdevice.trx_set_gains_func(&UE->rfdevice,&openair0_cfg[0]);
}*/
......@@ -763,29 +763,29 @@ void *UE_thread(void *arg) {
readBlockSize,
UE->frame_parms.nb_antennas_rx),"");
if (slot_nr == (20+NR_UPLINK_SLOT-DURATION_RX_TO_TX - 1)%20)
AssertFatal( writeBlockSize ==
UE->rfdevice.trx_write_func(&UE->rfdevice,
timestamp+
(DURATION_RX_TO_TX*UE->frame_parms.samples_per_slot) -
UE->frame_parms.ofdm_symbol_size-UE->frame_parms.nb_prefix_samples0 -
openair0_cfg[0].tx_sample_advance,
txp,
writeBlockSize,
UE->frame_parms.nb_antennas_tx,
2),"");
if (slot_nr == (20+NR_UPLINK_SLOT-DURATION_RX_TO_TX)%20)
AssertFatal( writeBlockSize ==
UE->rfdevice.trx_write_func(&UE->rfdevice,
timestamp+
(DURATION_RX_TO_TX*UE->frame_parms.samples_per_slot) -
UE->frame_parms.ofdm_symbol_size-UE->frame_parms.nb_prefix_samples0 -
openair0_cfg[0].tx_sample_advance,
txp,
writeBlockSize,
UE->frame_parms.nb_antennas_tx,
3),"");
if (slot_nr == (20+NR_UPLINK_SLOT-DURATION_RX_TO_TX - 1)%20)
AssertFatal( writeBlockSize ==
UE->rfdevice.trx_write_func(&UE->rfdevice,
timestamp+
(DURATION_RX_TO_TX*UE->frame_parms.samples_per_slot) -
UE->frame_parms.ofdm_symbol_size-UE->frame_parms.nb_prefix_samples0 -
openair0_cfg[0].tx_sample_advance,
txp,
writeBlockSize,
UE->frame_parms.nb_antennas_tx,
2),"");
if (slot_nr == (20+NR_UPLINK_SLOT-DURATION_RX_TO_TX)%20)
AssertFatal( writeBlockSize ==
UE->rfdevice.trx_write_func(&UE->rfdevice,
timestamp+
(DURATION_RX_TO_TX*UE->frame_parms.samples_per_slot) -
UE->frame_parms.ofdm_symbol_size-UE->frame_parms.nb_prefix_samples0 -
openair0_cfg[0].tx_sample_advance,
txp,
writeBlockSize,
UE->frame_parms.nb_antennas_tx,
3),"");
if( slot_nr==(nb_slot_frame-1)) {
// read in first symbol of next frame and adjust for timing drift
......
executables/nr-uesoftmodem.c
View file @ 53db39b8
......@@ -214,7 +214,7 @@ int emulate_rf = 0;
tpool_t *Tpool;
#ifdef UE_DLSCH_PARALLELISATION
tpool_t *Tpool_dl;
tpool_t *Tpool_dl;
#endif
......@@ -308,8 +308,8 @@ static void *scope_thread(void *arg) {
while (!oai_exit) {
phy_scope_nrUE(form_nrue[0],
PHY_vars_UE_g[0][0],
0,0,1);
PHY_vars_UE_g[0][0],
0,0,1);
usleep(100*1000);
}
......@@ -382,9 +382,9 @@ static void get_options(void) {
int tddflag=0, nonbiotflag, vcdflag=0;
char *loopfile=NULL;
int dumpframe=0;
//uint32_t noS1;
//uint32_t nokrnmod;
//uint32_t nokrnmod;
paramdef_t cmdline_params[] =CMDLINE_PARAMS_DESC_UE ;
config_process_cmdline( cmdline_params,sizeof(cmdline_params)/sizeof(paramdef_t),NULL);
......@@ -511,12 +511,12 @@ void init_openair0(void) {
else {
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 1228800;
}
}
} else {
LOG_E(PHY,"Unsupported numerology!\n");
exit(-1);
}
}else if(frame_parms[0]->N_RB_DL == 273) {
} else if(frame_parms[0]->N_RB_DL == 273) {
if (numerology==1) {
if (frame_parms[0]->threequarter_fs) {
AssertFatal(0 == 1,"three quarter sampling not supported for N_RB 273\n");
......@@ -524,12 +524,12 @@ void init_openair0(void) {
else {
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 1228800;
}
}
} else {
LOG_E(PHY,"Unsupported numerology!\n");
exit(-1);
}
}else if(frame_parms[0]->N_RB_DL == 106) {
} else if(frame_parms[0]->N_RB_DL == 106) {
if (numerology==0) {
if (frame_parms[0]->threequarter_fs) {
openair0_cfg[card].sample_rate=23.04e6;
......@@ -538,15 +538,15 @@ void init_openair0(void) {
openair0_cfg[card].sample_rate=30.72e6;
openair0_cfg[card].samples_per_frame = 307200;
}
} else if (numerology==1) {
} else if (numerology==1) {
if (frame_parms[0]->threequarter_fs) {
openair0_cfg[card].sample_rate=46.08e6;
openair0_cfg[card].samples_per_frame = 460800;
openair0_cfg[card].sample_rate=46.08e6;
openair0_cfg[card].samples_per_frame = 460800;
}
else {
openair0_cfg[card].sample_rate=61.44e6;
openair0_cfg[card].samples_per_frame = 614400;
}
openair0_cfg[card].sample_rate=61.44e6;
openair0_cfg[card].samples_per_frame = 614400;
}
} else if (numerology==2) {
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 1228800;
......@@ -621,7 +621,7 @@ void init_pdcp(void) {
pdcp_initmask = pdcp_initmask | UE_NAS_USE_TUN_BIT;
/*if (rlc_module_init() != 0) {
LOG_I(RLC, "Problem at RLC initiation \n");
LOG_I(RLC, "Problem at RLC initiation \n");
}
pdcp_layer_init();
nr_ip_over_LTE_DRB_preconfiguration();*/
......@@ -633,7 +633,7 @@ void init_pdcp(void) {
// Stupid function addition because UE itti messages queues definition is common with eNB
void *rrc_enb_process_itti_msg(void *notUsed) {
return NULL;
return NULL;
}
......@@ -663,12 +663,12 @@ int main( int argc, char **argv ) {
set_taus_seed (0);
tpool_t pool;
Tpool = &pool;
char params[]="-1,-1";
char params[]="-1,-1";
initTpool(params, Tpool, false);
#ifdef UE_DLSCH_PARALLELISATION
tpool_t pool_dl;
Tpool_dl = &pool_dl;
char params_dl[]="-1,-1,-1,-1, -1,-1,-1,-1,-1,-1,-1,-1,-1,-1";
char params_dl[]="-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1";
initTpool(params_dl, Tpool_dl, false);
#endif
cpuf=get_cpu_freq_GHz();
......@@ -676,21 +676,21 @@ int main( int argc, char **argv ) {
init_opt() ;
if(IS_SOFTMODEM_NOS1)
init_pdcp();
init_pdcp();
if (ouput_vcd) {
vcd_signal_dumper_init("/tmp/openair_dump_nrUE.vcd");
}
/*
#ifdef PDCP_USE_NETLINK
netlink_init();
#if defined(PDCP_USE_NETLINK_QUEUES)
pdcp_netlink_init();
#endif
#endif
*/
#ifndef PACKAGE_VERSION
/*
#ifdef PDCP_USE_NETLINK
netlink_init();
#if defined(PDCP_USE_NETLINK_QUEUES)
pdcp_netlink_init();
#endif
#endif
*/
#ifndef PACKAGE_VERSION
# define PACKAGE_VERSION "UNKNOWN-EXPERIMENTAL"
#endif
LOG_I(HW, "Version: %s\n", PACKAGE_VERSION);
......
executables/softmodem-common.c
View file @ 53db39b8
......@@ -125,27 +125,27 @@ void get_common_options(void) {
}
void softmodem_printresources(int sig, telnet_printfunc_t pf) {
struct rusage usage;
struct timespec stop;
clock_gettime(CLOCK_BOOTTIME, &stop);
uint64_t elapse = (stop.tv_sec - start.tv_sec) ; // in seconds
int st = getrusage(RUSAGE_SELF,&usage);
if (!st) {
pf("\nRun time: %lluh %llus\n",(unsigned long long)elapse/3600,(unsigned long long)(elapse - (elapse/3600)));
pf("\tTime executing user inst.: %lds %ldus\n",(long)usage.ru_utime.tv_sec,(long)usage.ru_utime.tv_usec);
pf("\tTime executing system inst.: %lds %ldus\n",(long)usage.ru_stime.tv_sec,(long)usage.ru_stime.tv_usec);
pf("\tMax. Phy. memory usage: %ldkB\n",(long)usage.ru_maxrss);
pf("\tPage fault number (no io): %ld\n",(long)usage.ru_minflt);
pf("\tPage fault number (requiring io): %ld\n",(long)usage.ru_majflt);
pf("\tNumber of file system read: %ld\n",(long)usage.ru_inblock);
pf("\tNumber of filesystem write: %ld\n",(long)usage.ru_oublock);
pf("\tNumber of context switch (process origin, io...): %ld\n",(long)usage.ru_nvcsw);
pf("\tNumber of context switch (os origin, priority...): %ld\n",(long)usage.ru_nivcsw);
}
struct rusage usage;
struct timespec stop;
clock_gettime(CLOCK_BOOTTIME, &stop);
uint64_t elapse = (stop.tv_sec - start.tv_sec) ; // in seconds
int st = getrusage(RUSAGE_SELF,&usage);
if (!st) {
pf("\nRun time: %lluh %llus\n",(unsigned long long)elapse/3600,(unsigned long long)(elapse - (elapse/3600)));
pf("\tTime executing user inst.: %lds %ldus\n",(long)usage.ru_utime.tv_sec,(long)usage.ru_utime.tv_usec);
pf("\tTime executing system inst.: %lds %ldus\n",(long)usage.ru_stime.tv_sec,(long)usage.ru_stime.tv_usec);
pf("\tMax. Phy. memory usage: %ldkB\n",(long)usage.ru_maxrss);
pf("\tPage fault number (no io): %ld\n",(long)usage.ru_minflt);
pf("\tPage fault number (requiring io): %ld\n",(long)usage.ru_majflt);
pf("\tNumber of file system read: %ld\n",(long)usage.ru_inblock);
pf("\tNumber of filesystem write: %ld\n",(long)usage.ru_oublock);
pf("\tNumber of context switch (process origin, io...): %ld\n",(long)usage.ru_nvcsw);
pf("\tNumber of context switch (os origin, priority...): %ld\n",(long)usage.ru_nivcsw);
}
}
void signal_handler(int sig) {
......@@ -160,9 +160,9 @@ void signal_handler(int sig) {
backtrace_symbols_fd(array, size, 2);
exit(-1);
} else {
if(sig==SIGINT ||sig==SOFTMODEM_RTSIGNAL)
softmodem_printresources(sig,(telnet_printfunc_t)printf);
if (sig != SOFTMODEM_RTSIGNAL) {
if(sig==SIGINT ||sig==SOFTMODEM_RTSIGNAL)
softmodem_printresources(sig,(telnet_printfunc_t)printf);
if (sig != SOFTMODEM_RTSIGNAL) {
printf("Linux signal %s...\n",strsignal(sig));
exit_function(__FILE__, __FUNCTION__, __LINE__,"softmodem starting exit procedure\n");
}
......@@ -172,7 +172,7 @@ void signal_handler(int sig) {
void set_softmodem_sighandler(void) {
struct sigaction act,oldact;
struct sigaction act,oldact;
clock_gettime(CLOCK_BOOTTIME, &start);
memset(&act,0,sizeof(act));
act.sa_handler=signal_handler;
......@@ -181,5 +181,5 @@ void set_softmodem_sighandler(void) {
signal(SIGSEGV, signal_handler);
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
signal(SIGABRT, signal_handler);
signal(SIGABRT, signal_handler);
}
executables/softmodem-common.h
View file @ 53db39b8
......@@ -37,6 +37,11 @@ extern "C"
#endif
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_SPLIT73 "Split 7.3 (below rate matching) option: <cu|du>:<remote ip address>:<remote port>"
#define CONFIG_HLP_TPOOL "Thread pool configuration: \n\
default no pool (runs in calling thread),\n\
list of cores, comma separated (negative value is no core affinity)\n\
example: -1,3 launches two working threads one floating, the second set on core 3"
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
#define CONFIG_HLP_CALUERM ""
......@@ -87,6 +92,7 @@ extern "C"
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*-----------------------------------------------------------------------------------------------------------------------------------------------------*/
#define RF_CONFIG_FILE softmodem_params.rf_config_file
#define SPLIT73 softmodem_params.split73
#define TP_CONFIG softmodem_params.threadPoolConfig
#define PHY_TEST softmodem_params.phy_test
#define WAIT_FOR_SYNC softmodem_params.wait_for_sync
......@@ -103,6 +109,8 @@ extern "C"
#define CMDLINE_PARAMS_DESC { \
{"rf-config-file", CONFIG_HLP_RFCFGF, 0, strptr:(char **)&RF_CONFIG_FILE, defstrval:NULL, TYPE_STRING, sizeof(RF_CONFIG_FILE)},\
{"split73", CONFIG_HLP_SPLIT73, 0, strptr:(char **)&SPLIT73, defstrval:NULL, TYPE_STRING, sizeof(SPLIT73)},\
{"thread-pool", CONFIG_HLP_TPOOL, 0, strptr:(char **)&TP_CONFIG, defstrval:"n", TYPE_STRING, sizeof(TP_CONFIG)}, \
{"phy-test", CONFIG_HLP_PHYTST, PARAMFLAG_BOOL, iptr:&PHY_TEST, defintval:0, TYPE_INT, 0}, \
{"usim-test", CONFIG_HLP_USIM, PARAMFLAG_BOOL, u8ptr:&USIM_TEST, defintval:0, TYPE_UINT8, 0}, \
{"clock", CONFIG_HLP_CLK, 0, uptr:&CLOCK_SOURCE, defintval:0, TYPE_UINT, 0}, \
......@@ -179,6 +187,7 @@ typedef struct {
uint64_t optmask;
THREAD_STRUCT thread_struct;
char rf_config_file[1024];
char split73[1024];
char threadPoolConfig[1024];
int phy_test;
uint8_t usim_test;
......
executables/split_headers.h
View file @ 53db39b8
......@@ -5,10 +5,11 @@
#include <stdbool.h>
#include <openair1/PHY/defs_eNB.h>
#define CU_IP "127.0.0.1"
#define CU_PORT "7878"
#define DU_IP "127.0.0.1"
#define DU_PORT "8787"
#define SPLIT73_CU 1
#define SPLIT73_DU 2
extern int split73;
#define MTU 65536
#define UDP_TIMEOUT 900000L // in micro second (struct timeval, NOT struct timespec)
......
openair1/PHY/LTE_TRANSPORT/dlsch_coding.c
View file @ 53db39b8
......@@ -310,7 +310,7 @@ static void TPencode(void * arg) {
lte_rate_matching_turbo(hadlsch->RTC[rdata->r],
rdata->G, //G
hadlsch->w[rdata->r],
hadlsch->e+rdata->r_offset,
hadlsch->eDL+rdata->r_offset,
hadlsch->C, // C
rdata->dlsch->Nsoft, // Nsoft,
rdata->dlsch->Mdlharq,
......@@ -389,7 +389,7 @@ int dlsch_encoding(PHY_VARS_eNB *eNB,
for (int r=0, r_offset=0; r<hadlsch->C; r++) {
union turboReqUnion id= {.s={dlsch->rnti,frame,subframe,r,0}};
notifiedFIFO_elt_t *req=newNotifiedFIFO_elt(sizeof(turboEncode_t), id.p, &proc->respEncode, TPencode);
notifiedFIFO_elt_t *req=newNotifiedFIFO_elt(sizeof(turboEncode_t), id.p, proc->respEncode, TPencode);
turboEncode_t * rdata=(turboEncode_t *) NotifiedFifoData(req);
rdata->input=hadlsch->c[r];
rdata->Kr_bytes= ( r<hadlsch->Cminus ? hadlsch->Kminus : hadlsch->Kplus) >>3;
......@@ -404,8 +404,8 @@ int dlsch_encoding(PHY_VARS_eNB *eNB,
rdata->r_offset=r_offset;
rdata->G=G;
if ( proc->threadPool.activated) {
pushTpool(&proc->threadPool,req);
if ( proc->threadPool->activated ) {
pushTpool(proc->threadPool,req);
proc->nbEncode++;
} else {
TPencode(rdata);
......
openair1/PHY/LTE_TRANSPORT/dlsch_modulation.c
View file @ 53db39b8
......@@ -158,7 +158,7 @@ int allocate_REs_in_RB_no_pilots_QPSK_siso(PHY_VARS_eNB* phy_vars_eNB,
{
LTE_DL_FRAME_PARMS *frame_parms = &phy_vars_eNB->frame_parms;
uint8_t *x0 = dlsch0_harq->e;
uint8_t *x0 = dlsch0_harq->eDL;
uint32_t qpsk_table_offset_re = 0;
uint32_t qpsk_table_offset_im = 0;
......@@ -248,7 +248,7 @@ int allocate_REs_in_RB_pilots_QPSK_siso(PHY_VARS_eNB* phy_vars_eNB,
LTE_DL_FRAME_PARMS *frame_parms=&phy_vars_eNB->frame_parms;
uint8_t *x0 = dlsch0_harq->e;
uint8_t *x0 = dlsch0_harq->eDL;
uint32_t qpsk_table_offset_re = 0;
uint32_t qpsk_table_offset_im = 0;
......@@ -343,7 +343,7 @@ int allocate_REs_in_RB_no_pilots_16QAM_siso(PHY_VARS_eNB* phy_vars_eNB,
{
LTE_DL_FRAME_PARMS *frame_parms = &phy_vars_eNB->frame_parms;
uint8_t *x0 = dlsch0_harq->e;
uint8_t *x0 = dlsch0_harq->eDL;
uint32_t qam16_table_offset_re = 0;
uint32_t qam16_table_offset_im = 0;
......@@ -439,7 +439,7 @@ int allocate_REs_in_RB_pilots_16QAM_siso(PHY_VARS_eNB* phy_vars_eNB,
LTE_DL_FRAME_PARMS *frame_parms=&phy_vars_eNB->frame_parms;
uint8_t *x0 = dlsch0_harq->e;
uint8_t *x0 = dlsch0_harq->eDL;
uint32_t qam16_table_offset_re = 0;
uint32_t qam16_table_offset_im = 0;
......@@ -542,7 +542,7 @@ int allocate_REs_in_RB_no_pilots_64QAM_siso(PHY_VARS_eNB* phy_vars_eNB,
LTE_DL_FRAME_PARMS *frame_parms = &phy_vars_eNB->frame_parms;
uint8_t *x0 = dlsch0_harq->e;
uint8_t *x0 = dlsch0_harq->eDL;
uint32_t qam64_table_offset_re = 0;
uint32_t qam64_table_offset_im = 0;
......@@ -699,7 +699,7 @@ int allocate_REs_in_RB_pilots_64QAM_siso(PHY_VARS_eNB* phy_vars_eNB,
LTE_DL_FRAME_PARMS *frame_parms=&phy_vars_eNB->frame_parms;
uint8_t *x0 = dlsch0_harq->e;
uint8_t *x0 = dlsch0_harq->eDL;
uint32_t qam64_table_offset_re = 0;
uint32_t qam64_table_offset_im = 0;
......@@ -866,12 +866,12 @@ int allocate_REs_in_RB(PHY_VARS_eNB* phy_vars_eNB,
if ((dlsch0_harq != NULL) && (dlsch1_harq != NULL)) { //this is for TM3, TM4
x0 = dlsch0_harq->e;
x0 = dlsch0_harq->eDL;
mimo_mode = dlsch0_harq->mimo_mode;
first_layer0 = dlsch0_harq->first_layer;
Nlayers0 = dlsch0_harq->Nlayers;
mod_order0 = dlsch0_harq->Qm;
x1 = dlsch1_harq->e;
x1 = dlsch1_harq->eDL;
// Fill these in later for TM8-10
// Nlayers1 = dlsch1_harq->Nlayers;
// first_layer1 = dlsch1_harq->first_layer;
......@@ -879,7 +879,7 @@ int allocate_REs_in_RB(PHY_VARS_eNB* phy_vars_eNB,
} else if ((dlsch0_harq != NULL) && (dlsch1_harq == NULL)){ //This is for SIS0 TM1, TM6, etc
x0 = dlsch0_harq->e;
x0 = dlsch0_harq->eDL;
mimo_mode = dlsch0_harq->mimo_mode;
first_layer0 = dlsch0_harq->first_layer;
Nlayers0 = dlsch0_harq->Nlayers;
......@@ -887,7 +887,7 @@ int allocate_REs_in_RB(PHY_VARS_eNB* phy_vars_eNB,
} else if ((dlsch0_harq == NULL) && (dlsch1_harq != NULL)){ // This is for TM4 retransmission
x0 = dlsch1_harq->e;
x0 = dlsch1_harq->eDL;
mimo_mode = dlsch1_harq->mimo_mode;
first_layer0 = dlsch1_harq->first_layer;
Nlayers0 = dlsch1_harq->Nlayers;
......@@ -2692,7 +2692,7 @@ int dlsch_modulation_SIC(int32_t **sic_buffer,
LTE_DL_eNB_HARQ_t *dlsch0_harq = dlsch0->harq_processes[harq_pid];
uint32_t i,jj,re_allocated=0;
uint8_t mod_order0 = dlsch0_harq->Qm;
uint8_t *x0 = dlsch0_harq->e;
uint8_t *x0 = dlsch0_harq->eDL;
uint8_t qam64_table_offset_re = 0;
uint8_t qam64_table_offset_im = 0;
uint8_t qam16_table_offset_re = 0;
......@@ -2883,7 +2883,7 @@ int mch_modulation(int32_t **txdataF,
&jj,
re_offset,
symbol_offset,
dlsch->harq_processes[0]->e,
dlsch->harq_processes[0]->eDL,
l,
mod_order,
amp,
......
openair1/PHY/LTE_TRANSPORT/dlsch_scrambling.c
View file @ 53db39b8
......@@ -52,7 +52,7 @@ void dlsch_scrambling(LTE_DL_FRAME_PARMS *frame_parms,
int n;
// uint8_t reset;
uint32_t x1, x2, s=0;
uint8_t *dlsch_e=dlsch->harq_processes[harq_pid]->e;
uint8_t *dlsch_e=dlsch->harq_processes[harq_pid]->eDL;
uint8_t *e=dlsch_e;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_ENB_DLSCH_SCRAMBLING, VCD_FUNCTION_IN);
// Rule for accumulation of subframes for BL/CE UEs
......
openair1/PHY/LTE_TRANSPORT/transport_eNB.h
View file @ 53db39b8
......@@ -100,7 +100,7 @@ typedef struct {
/// start symbold of pdsch
uint8_t pdsch_start;
/// Concatenated "e"-sequences (for definition see 36-212 V8.6 2009-03, p.17-18)
uint8_t e[MAX_NUM_CHANNEL_BITS] __attribute__((aligned(32)));
uint8_t eDL[MAX_NUM_CHANNEL_BITS] __attribute__((aligned(32)));
/// Turbo-code outputs (36-212 V8.6 2009-03, p.12
uint8_t *d[MAX_NUM_DLSCH_SEGMENTS];//[(96+3+(3*6144))];
/// Sub-block interleaver outputs (36-212 V8.6 2009-03, p.16-17)
......@@ -261,11 +261,11 @@ typedef struct {
/// coded RI bits
int16_t q_RI[MAX_RI_PAYLOAD];
/// Concatenated "e"-sequences (for definition see 36-212 V8.6 2009-03, p.17-18)
int16_t e[MAX_NUM_CHANNEL_BITS] __attribute__((aligned(32)));
int16_t eUL[MAX_NUM_CHANNEL_BITS] __attribute__((aligned(32)));
/// Temporary h sequence to flag PUSCH_x/PUSCH_y symbols which are not scrambled
uint8_t h[MAX_NUM_CHANNEL_BITS];
/// Pointer to the payload
uint8_t *b;
uint8_t *decodedBytes;
/// Pointers to transport block segments
//TBD
uint8_t *c[MAX_NUM_ULSCH_SEGMENTS];
......
openair1/PHY/LTE_TRANSPORT/ulsch_decoding.c
View file @ 53db39b8
......@@ -54,9 +54,9 @@ void free_eNB_ulsch(LTE_eNB_ULSCH_t *ulsch) {
if (ulsch) {
for (i=0; i<8; i++) {
if (ulsch->harq_processes[i]) {
if (ulsch->harq_processes[i]->b) {
free16(ulsch->harq_processes[i]->b,MAX_ULSCH_PAYLOAD_BYTES);
ulsch->harq_processes[i]->b = NULL;
if (ulsch->harq_processes[i]->decodedBytes) {
free16(ulsch->harq_processes[i]->decodedBytes,MAX_ULSCH_PAYLOAD_BYTES);
ulsch->harq_processes[i]->decodedBytes = NULL;
}
for (r=0; r<MAX_NUM_ULSCH_SEGMENTS; r++) {
......@@ -115,10 +115,10 @@ LTE_eNB_ULSCH_t *new_eNB_ulsch(uint8_t max_turbo_iterations,uint8_t N_RB_UL, uin
if (ulsch->harq_processes[i]) {
memset(ulsch->harq_processes[i],0,sizeof(LTE_UL_eNB_HARQ_t));
ulsch->harq_processes[i]->b = (uint8_t *)malloc16(MAX_ULSCH_PAYLOAD_BYTES/bw_scaling);
ulsch->harq_processes[i]->decodedBytes = (uint8_t *)malloc16(MAX_ULSCH_PAYLOAD_BYTES/bw_scaling);
if (ulsch->harq_processes[i]->b)
memset(ulsch->harq_processes[i]->b,0,MAX_ULSCH_PAYLOAD_BYTES/bw_scaling);
if (ulsch->harq_processes[i]->decodedBytes)
memset(ulsch->harq_processes[i]->decodedBytes,0,MAX_ULSCH_PAYLOAD_BYTES/bw_scaling);
else
exit_flag=3;
......@@ -229,7 +229,7 @@ void processULSegment(void * arg) {
G,
ulsch_harq->w[r],
(uint8_t *) &dummy_w[0],
ulsch_harq->e+rdata->r_offset,
ulsch_harq->eUL+rdata->r_offset,
ulsch_harq->C,
NSOFT,
0, //Uplink
......@@ -327,19 +327,15 @@ int ulsch_decoding_data(PHY_VARS_eNB *eNB, L1_rxtx_proc_t *proc,
E = ulsch_harq->Qm * (Gp/ulsch_harq->C);
else
E = ulsch_harq->Qm * ((GpmodC==0?0:1) + (Gp/ulsch_harq->C));
#ifdef FS6
if ( getenv("fs6") != NULL && strncasecmp( getenv("fs6"), "du", 2) == 0 ) {
sendFs6Ul(eNB, UE_id, harq_pid, r, ulsch_harq->e+r_offset, E*sizeof(int16_t), r_offset);
if ( split73 == SPLIT73_DU ) {
sendFs6Ul(eNB, UE_id, harq_pid, r, ulsch_harq->eUL+r_offset, E*sizeof(int16_t), r_offset);
r_offset += E;
continue;
}
#endif
union turboReqUnion id= {.s={ulsch->rnti,proc->frame_rx,proc->subframe_rx,0,0}};
notifiedFIFO_elt_t *req=newNotifiedFIFO_elt(sizeof(turboDecode_t), id.p, &proc->respDecode, processULSegment);
notifiedFIFO_elt_t *req=newNotifiedFIFO_elt(sizeof(turboDecode_t), id.p, proc->respDecode, processULSegment);
turboDecode_t * rdata=(turboDecode_t *) NotifiedFifoData(req);
rdata->eNB=eNB;
......@@ -359,7 +355,7 @@ int ulsch_decoding_data(PHY_VARS_eNB *eNB, L1_rxtx_proc_t *proc,
rdata->function=td;
int Fbytes=(r==0) ? rdata->Fbits>>3 : 0;
int sz=Kr_bytes - Fbytes - ((ulsch_harq->C>1)?3:0);
pushTpool(&proc->threadPool,req);
pushTpool(proc->threadPool,req);
proc->nbDecode++;
LOG_D(PHY,"Added a block to decode, in pipe: %d\n",proc->nbDecode);
r_offset+=E;
......@@ -892,8 +888,8 @@ unsigned int ulsch_decoding(PHY_VARS_eNB *eNB,
j2+=2;
}
ulsch_harq->e[iprime++] = y[j2++];
ulsch_harq->e[iprime++] = y[j2++];
ulsch_harq->eUL[iprime++] = y[j2++];
ulsch_harq->eUL[iprime++] = y[j2++];
}
break;
......@@ -905,10 +901,10 @@ unsigned int ulsch_decoding(PHY_VARS_eNB *eNB,
j2+=4;
}
ulsch_harq->e[iprime++] = y[j2++];
ulsch_harq->e[iprime++] = y[j2++];
ulsch_harq->e[iprime++] = y[j2++];
ulsch_harq->e[iprime++] = y[j2++];
ulsch_harq->eUL[iprime++] = y[j2++];
ulsch_harq->eUL[iprime++] = y[j2++];
ulsch_harq->eUL[iprime++] = y[j2++];
ulsch_harq->eUL[iprime++] = y[j2++];
}
break;
......@@ -920,12 +916,12 @@ unsigned int ulsch_decoding(PHY_VARS_eNB *eNB,
j2+=6;
}
ulsch_harq->e[iprime++] = y[j2++];
ulsch_harq->e[iprime++] = y[j2++];
ulsch_harq->e[iprime++] = y[j2++];
ulsch_harq->e[iprime++] = y[j2++];
ulsch_harq->e[iprime++] = y[j2++];
ulsch_harq->e[iprime++] = y[j2++];
ulsch_harq->eUL[iprime++] = y[j2++];
ulsch_harq->eUL[iprime++] = y[j2++];
ulsch_harq->eUL[iprime++] = y[j2++];
ulsch_harq->eUL[iprime++] = y[j2++];
ulsch_harq->eUL[iprime++] = y[j2++];
ulsch_harq->eUL[iprime++] = y[j2++];
}
break;
......@@ -963,7 +959,7 @@ unsigned int ulsch_decoding(PHY_VARS_eNB *eNB,
*/
int16_t *yp,*ep;
for (iprime=0,yp=&y[j2],ep=&ulsch_harq->e[0];
for (iprime=0,yp=&y[j2],ep=&ulsch_harq->eUL[0];
iprime<G;
iprime+=8,j2+=8,ep+=8,yp+=8) {
ep[0] = yp[0];
......
openair1/PHY/LTE_UE_TRANSPORT/dlsch_decoding.c
View file @ 53db39b8
......@@ -793,7 +793,7 @@ int dlsch_encoding_SIC(PHY_VARS_UE *ue,
r_offset += lte_rate_matching_turbo(dlsch->harq_processes[harq_pid]->RTC[r],
G, //G
dlsch->harq_processes[harq_pid]->w[r],
dlsch->harq_processes[harq_pid]->e+r_offset,
dlsch->harq_processes[harq_pid]->eDL+r_offset,
dlsch->harq_processes[harq_pid]->C, // C
dlsch->Nsoft, // Nsoft,
dlsch->Mdlharq,
......
openair1/PHY/NR_UE_TRANSPORT/dci_nr.c
View file @ 53db39b8
......@@ -2032,7 +2032,7 @@ uint16_t nr_dci_format_size (PHY_VARS_NR_UE *ue,
ul_res_alloc_type_1 = 1;
}
uint8_t n_bits_freq_dom_res_assign_ul=0,n_ul_RGB_tmp;
uint8_t n_bits_freq_dom_res_assign_ul=0,n_ul_RGB_tmp=0;
if (ul_res_alloc_type_0 == 1) { // implementation of Table 6.1.2.2.1-1 TC 38.214 subclause 6.1.2.2.1
// config1: PUSCH-Config IE contains rbg-Size ENUMERATED {config1 config2}
......
openair1/SCHED/phy_procedures_lte_eNb.c
View file @ 53db39b8
......@@ -320,10 +320,10 @@ bool dlsch_procedures(PHY_VARS_eNB *eNB,
&eNB->dlsch_interleaving_stats);
stop_meas(&eNB->dlsch_encoding_stats);
if ( proc->threadPool.activated ) {
if ( proc->threadPool->activated ) {
// Wait all other threads finish to process
while (proc->nbEncode) {
delNotifiedFIFO_elt(pullTpool(&proc->respEncode, &proc->threadPool));
delNotifiedFIFO_elt(pullTpool(proc->respEncode, proc->threadPool));
proc->nbEncode--;
}
}
......@@ -604,12 +604,11 @@ void srs_procedures(PHY_VARS_eNB *eNB,L1_rxtx_proc_t *proc) {
}
void fill_sr_indication(int UEid, PHY_VARS_eNB *eNB,uint16_t rnti,int frame,int subframe,uint32_t stat) {
#ifdef FS6
if ( getenv("fs6") != NULL && strncasecmp( getenv("fs6"), "du", 2) == 0 ) {
if ( split73 == SPLIT73_DU ) {
sendFs6Ulharq(fs6ULindicationSr, UEid, eNB, NULL, frame, subframe, NULL,0,0, rnti, stat);
return;
}
#endif
pthread_mutex_lock(&eNB->UL_INFO_mutex);
nfapi_sr_indication_t *sr_ind = &eNB->UL_INFO.sr_ind;
nfapi_sr_indication_body_t *sr_ind_body = &sr_ind->sr_indication_body;
......@@ -1175,13 +1174,13 @@ void postDecode(L1_rxtx_proc_t *proc, notifiedFIFO_elt_t *req) {
if (decodeSucess) {
int Fbytes=(rdata->segment_r==0) ? rdata->Fbits>>3 : 0;
int sz=(rdata->Kr>>3) - Fbytes - ((ulsch_harq->C>1)?3:0);
memcpy(ulsch_harq->b+rdata->offset,
memcpy(ulsch_harq->decodedBytes+rdata->offset,
rdata->decoded_bytes+Fbytes,
sz);
} else {
if ( rdata->nbSegments != ulsch_harq->processedSegments ) {
int nb=abortTpool(&proc->threadPool, req->key);
nb+=abortNotifiedFIFO(&proc->respDecode, req->key);
int nb=abortTpool(proc->threadPool, req->key);
nb+=abortNotifiedFIFO(proc->respDecode, req->key);
proc->nbDecode-=nb;
LOG_I(PHY,"uplink segment error %d/%d, aborted %d segments\n",rdata->segment_r,rdata->nbSegments, nb);
AssertFatal(ulsch_harq->processedSegments+nb == rdata->nbSegments,"processed: %d, aborted: %d, total %d\n",
......@@ -1329,7 +1328,7 @@ void pusch_procedures(PHY_VARS_eNB *eNB,L1_rxtx_proc_t *proc) {
} // for (i=0; i<NUMBER_OF_UE_MAX; i++)
while (proc->nbDecode > 0) {
notifiedFIFO_elt_t *req=pullTpool(&proc->respDecode, &proc->threadPool);
notifiedFIFO_elt_t *req=pullTpool(proc->respDecode, proc->threadPool);
postDecode(proc, req);
delNotifiedFIFO_elt(req);
}
......@@ -1415,7 +1414,7 @@ void fill_rx_indication(PHY_VARS_eNB *eNB,
pdu->rx_indication_rel8.tl.tag = NFAPI_RX_INDICATION_REL8_TAG;
pdu->rx_indication_rel8.length = eNB->ulsch[UE_id]->harq_processes[harq_pid]->TBS>>3;
pdu->rx_indication_rel8.offset = 1; // DJP - I dont understand - but broken unless 1 ???? 0; // filled in at the end of the UL_INFO formation
pdu->data = eNB->ulsch[UE_id]->harq_processes[harq_pid]->b;
pdu->data = eNB->ulsch[UE_id]->harq_processes[harq_pid]->decodedBytes;
// estimate timing advance for MAC
sync_pos = lte_est_timing_advance_pusch(eNB,UE_id);
timing_advance_update = sync_pos; // - eNB->frame_parms.nb_prefix_samples/4; //to check
......@@ -1749,12 +1748,10 @@ void fill_ulsch_harq_indication (PHY_VARS_eNB *eNB, LTE_UL_eNB_HARQ_t *ulsch_har
}
void fill_uci_harq_indication (int UEid, PHY_VARS_eNB *eNB, LTE_eNB_UCI *uci, int frame, int subframe, uint8_t *harq_ack, uint8_t tdd_mapping_mode, uint16_t tdd_multiplexing_mask) {
#ifdef FS6
if ( getenv("fs6") != NULL && strncasecmp( getenv("fs6"), "du", 2) == 0 ) {
if ( split73 == SPLIT73_DU ) {
sendFs6Ulharq(fs6ULindicationHarq, UEid, eNB, uci, frame, subframe, harq_ack, tdd_mapping_mode, tdd_multiplexing_mask, 0, 0);
return;
}
#endif
int UE_id=find_dlsch(uci->rnti,eNB,SEARCH_EXIST);
......
openair1/SIMULATION/LTE_PHY/dlsim.c
View file @ 53db39b8
......@@ -1266,9 +1266,12 @@ int main(int argc, char **argv) {
}
L1_rxtx_proc_t *proc_eNB = &eNB->proc.L1_proc;
initTpool("n", &proc_eNB->threadPool, true);
initNotifiedFIFO(&proc_eNB->respEncode);
initNotifiedFIFO(&proc_eNB->respDecode);
proc_eNB->threadPool=(tpool_t*)malloc(sizeof(tpool_t));
proc_eNB->respEncode=(notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t));
proc_eNB->respDecode=(notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t));
initTpool("n", proc_eNB->threadPool, true);
initNotifiedFIFO(proc_eNB->respEncode);
initNotifiedFIFO(proc_eNB->respDecode);
proc_eNB->frame_tx=0;
......
openair1/SIMULATION/LTE_PHY/ulsim.c
View file @ 53db39b8
......@@ -793,9 +793,12 @@ int main(int argc, char **argv) {
proc_rxtx_ue->frame_rx = (subframe<4)?(proc_rxtx->frame_tx-1):(proc_rxtx->frame_tx);
proc_rxtx_ue->subframe_tx = proc_rxtx->subframe_rx;
proc_rxtx_ue->subframe_rx = (proc_rxtx->subframe_tx+6)%10;
initTpool("n", &proc_rxtx->threadPool, true);
initNotifiedFIFO(&proc_rxtx->respEncode);
initNotifiedFIFO(&proc_rxtx->respDecode);
proc_rxtx->threadPool=(tpool_t*)malloc(sizeof(tpool_t));
proc_rxtx->respEncode=(notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t));
proc_rxtx->respDecode=(notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t));
initTpool("n",proc_rxtx->threadPool, true);
initNotifiedFIFO(proc_rxtx->respEncode);
initNotifiedFIFO(proc_rxtx->respDecode);
printf("Init UL hopping UE\n");
init_ul_hopping(&UE->frame_parms);
......
openair2/PHY_INTERFACE/IF_Module.h
View file @ 53db39b8
......@@ -176,11 +176,11 @@ typedef struct {
pthread_cond_t cond_RUs;
/// mutex for RXn-TXnp4 processing thread
pthread_mutex_t mutex_RUs;
tpool_t threadPool;
tpool_t *threadPool;
int nbEncode;
int nbDecode;
notifiedFIFO_t respEncode;
notifiedFIFO_t respDecode;
notifiedFIFO_t *respEncode;
notifiedFIFO_t *respDecode;
pthread_mutex_t mutex_emulateRF;
int instance_cnt_emulateRF;
pthread_t pthread_emulateRF;
......
targets/ARCH/rfsimulator/simulator.c
View file @ 53db39b8
......@@ -346,7 +346,7 @@ static int rfsimulator_write_internal(rfsimulator_state_t *t, openair0_timestamp
if ( t->lastWroteTS != 0 && abs((double)t->lastWroteTS-timestamp) > (double)CirSize)
LOG_E(HW,"Discontinuous TX gap too large Tx:%lu, %lu\n", t->lastWroteTS, timestamp);
if (t->lastWroteTS >= timestamp+1)
if (t->lastWroteTS > timestamp+nsamps)
LOG_E(HW,"Not supported to send Tx out of order (same in USRP) %lu, %lu\n",
t->lastWroteTS, timestamp);
t->lastWroteTS=timestamp+nsamps;
......@@ -468,8 +468,8 @@ static bool flushInput(rfsimulator_state_t *t, int timeout, int nsamps_for_initi
} else if ( b->lastReceivedTS == b->th.timestamp ) {
// normal case
} else {
abort();
AssertFatal(false, "received data in past: current is %lu, new reception: %lu!\n", b->lastReceivedTS, b->th.timestamp);
LOG_E(HW, "received data in past: current is %lu, new reception: %lu!\n", b->lastReceivedTS, b->th.timestamp);
b->trashingPacket=true;
}
pthread_mutex_lock(&Sockmutex);
......
targets/COMMON/create_tasks.c
View file @ 53db39b8
......@@ -41,6 +41,7 @@
# include "f1ap_du_task.h"
# include "enb_app.h"
# include "openair2/LAYER2/MAC/mac_proto.h"
#include <executables/split_headers.h>
extern RAN_CONTEXT_t RC;
......@@ -50,25 +51,21 @@ int create_tasks(uint32_t enb_nb) {
int rc;
if (enb_nb == 0) return 0;
bool fs6Du=false;
if ( getenv("fs6") != NULL && strncasecmp( getenv("fs6"), "du", 2) == 0 )
fs6Du=true;
LOG_I(ENB_APP, "Creating ENB_APP eNB Task\n");
rc = itti_create_task (TASK_ENB_APP, eNB_app_task, NULL);
AssertFatal(rc >= 0, "Create task for eNB APP failed\n");
LOG_I(RRC,"Creating RRC eNB Task\n");
rc = itti_create_task (TASK_RRC_ENB, rrc_enb_task, NULL);
AssertFatal(rc >= 0, "Create task for RRC eNB failed\n");
// No more rrc thread, as many race conditions are hidden behind
rrc_enb_init();
itti_mark_task_ready(TASK_RRC_ENB);
if (EPC_MODE_ENABLED && !fs6Du ) {
if (EPC_MODE_ENABLED && ! ( split73==SPLIT73_DU ) ) {
rc = itti_create_task(TASK_SCTP, sctp_eNB_task, NULL);
AssertFatal(rc >= 0, "Create task for SCTP failed\n");
}
if (EPC_MODE_ENABLED && !NODE_IS_DU(type) && !fs6Du ) {
if (EPC_MODE_ENABLED && !NODE_IS_DU(type) && ! ( split73==SPLIT73_DU ) ) {
rc = itti_create_task(TASK_S1AP, s1ap_eNB_task, NULL);
AssertFatal(rc >= 0, "Create task for S1AP failed\n");
if (!(get_softmodem_params()->emulate_rf)){
......
targets/RT/USER/lte-softmodem.c
View file @ 53db39b8
......@@ -93,6 +93,7 @@ unsigned short config_frames[4] = {2,9,11,13};
#include "lte-softmodem.h"
#include "NB_IoT_interface.h"
#include <executables/split_headers.h>
pthread_cond_t nfapi_sync_cond;
......@@ -152,6 +153,13 @@ int otg_enabled;
uint64_t num_missed_slots=0; // counter for the number of missed slots
int split73=0;
void sendFs6Ul(PHY_VARS_eNB *eNB, int UE_id, int harq_pid, int segmentID, int16_t *data, int dataLen, int r_offset) {
AssertFatal(false, "Must not be called in this context\n");
}
void sendFs6Ulharq(enum pckType type, int UEid, PHY_VARS_eNB *eNB, LTE_eNB_UCI *uci, int frame, int subframe, uint8_t *harq_ack, uint8_t tdd_mapping_mode, uint16_t tdd_multiplexing_mask, uint16_t rnti, int32_t stat) {
AssertFatal(false, "Must not be called in this context\n");
}
extern void reset_opp_meas(void);
extern void print_opp_meas(void);
......@@ -438,12 +446,9 @@ int restart_L1L2(module_id_t enb_id) {
init_UE_list(&RC.mac[enb_id]->UE_list);
LOG_I(ENB_APP, "attempting to create ITTI tasks\n");
if (itti_create_task (TASK_RRC_ENB, rrc_enb_task, NULL) < 0) {
LOG_E(RRC, "Create task for RRC eNB failed\n");
return -1;
} else {
LOG_I(RRC, "Re-created task for RRC eNB successfully\n");
}
// No more rrc thread, as many race conditions are hidden behind
rrc_enb_init();
itti_mark_task_ready(TASK_RRC_ENB);
/* pass a reconfiguration request which will configure everything down to
* RC.eNB[i][j]->frame_parms, too */
......@@ -477,8 +482,7 @@ void init_pdcp(void) {
pdcp_initmask = pdcp_initmask | ENB_NAS_USE_TUN_W_MBMS_BIT;
if ( getenv("fs6") != NULL && strncasecmp( getenv("fs6"), "du", 2) == 0 )
pdcp_module_init(pdcp_initmask);
pdcp_module_init(pdcp_initmask);
if (NODE_IS_CU(RC.rrc[0]->node_type)) {
pdcp_set_rlc_data_req_func((send_rlc_data_req_func_t)proto_agent_send_rlc_data_req);
......@@ -643,12 +647,15 @@ int main ( int argc, char **argv )
for (int x=0; x < RC.nb_L1_inst; x++)
for (int CC_id=0; CC_id<RC.nb_L1_CC[x]; CC_id++) {
L1_rxtx_proc_t *L1proc= &RC.eNB[x][CC_id]->proc.L1_proc;
L1proc->threadPool=(tpool_t*)malloc(sizeof(tpool_t));
L1proc->respEncode=(notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t));
L1proc->respDecode=(notifiedFIFO_t*) malloc(sizeof(notifiedFIFO_t));
if ( strlen(get_softmodem_params()->threadPoolConfig) > 0 )
initTpool(get_softmodem_params()->threadPoolConfig, &L1proc->threadPool, true);
initTpool(get_softmodem_params()->threadPoolConfig, L1proc->threadPool, true);
else
initTpool("n", &L1proc->threadPool, true);
initNotifiedFIFO(&L1proc->respEncode);
initNotifiedFIFO(&L1proc->respDecode);
initTpool("n", L1proc->threadPool, true);
initNotifiedFIFO(L1proc->respEncode);
initNotifiedFIFO(L1proc->respDecode);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment