Skip to content

O
OpenXG-RAN
Commit 7d5e4983 authored by Rohit Gupta's avatar Rohit Gupta
Browse files
Options

Merge branch 'enhancement-57-UHD-interfacing' into develop

parents e3df9412 addaeffb
Hide whitespace changes
Inline Side-by-side
Showing with 11 additions and 13 deletions
targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
View file @ 7d5e4983
...@@ -464,7 +464,7 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_ ...@@ -464,7 +464,7 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_
break; break;
case 7680000: case 7680000:
openair0_cfg[0].samples_per_packet = 1024; openair0_cfg[0].samples_per_packet = 1024;
openair0_cfg[0].tx_sample_advance = 103; openair0_cfg[0].tx_sample_advance = 70;//103;
openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet; openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
break; break;
case 1920000: case 1920000:
...@@ -479,13 +479,11 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_ ...@@ -479,13 +479,11 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_
} }
} }
for(i=0;i<s->usrp->get_rx_num_channels();i++) { for(i=0;i<s->usrp->get_rx_num_channels();i++) {
if (i<openair0_cfg[0].rx_num_channels) { if (i<openair0_cfg[0].rx_num_channels) {
s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i); s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i); s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
printf("Setting rx freq/gain on channel %lu/%lu\n",i,s->usrp->get_rx_num_channels()); printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i); s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
set_rx_gain_offset(&openair0_cfg[0],i); set_rx_gain_offset(&openair0_cfg[0],i);
...@@ -506,7 +504,7 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_ ...@@ -506,7 +504,7 @@ int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_
if (i<openair0_cfg[0].tx_num_channels) { if (i<openair0_cfg[0].tx_num_channels) {
s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i); s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i); s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
printf("Setting tx freq/gain on channel %lu/%lu\n",i,s->usrp->get_tx_num_channels()); printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i); s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i); s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
} }
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf
View file @ 7d5e4983
...@@ -36,7 +36,7 @@ eNBs = ...@@ -36,7 +36,7 @@ eNBs =
nb_antennas_tx = 1; nb_antennas_tx = 1;
nb_antennas_rx = 1; nb_antennas_rx = 1;
tx_gain = 90; tx_gain = 90;
rx_gain = 120; rx_gain = 132;
prach_root = 0; prach_root = 0;
prach_config_index = 0; prach_config_index = 0;
prach_high_speed = "DISABLE"; prach_high_speed = "DISABLE";
...@@ -143,10 +143,10 @@ eNBs = ...@@ -143,10 +143,10 @@ eNBs =
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.216/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.213/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0"; ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.216/24"; ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.213/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
}; };
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.usrpb210.conf
View file @ 7d5e4983
...@@ -132,7 +132,7 @@ eNBs = ...@@ -132,7 +132,7 @@ eNBs =
}; };
////////// MME parameters: ////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.13.11"; mme_ip_address = ( { ipv4 = "192.168.12.11";
ipv6 = "192:168:30::17"; ipv6 = "192:168:30::17";
active = "yes"; active = "yes";
preference = "ipv4"; preference = "ipv4";
...@@ -142,10 +142,10 @@ eNBs = ...@@ -142,10 +142,10 @@ eNBs =
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.213/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0"; ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24"; ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.213/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
}; };
......
targets/RT/USER/lte-softmodem.c
View file @ 7d5e4983
...@@ -2883,8 +2883,8 @@ int main( int argc, char **argv ) ...@@ -2883,8 +2883,8 @@ int main( int argc, char **argv )
} else if (frame_parms[0]->N_RB_DL == 25) { } else if (frame_parms[0]->N_RB_DL == 25) {
openair0_cfg[card].sample_rate=7.68e6; openair0_cfg[card].sample_rate=7.68e6;
openair0_cfg[card].samples_per_frame = 76800; openair0_cfg[card].samples_per_frame = 76800;
openair0_cfg[card].tx_bw = 2.5e6; openair0_cfg[card].tx_bw = 5e6;
openair0_cfg[card].rx_bw = 2.5e6; openair0_cfg[card].rx_bw = 5e6;
} else if (frame_parms[0]->N_RB_DL == 6) { } else if (frame_parms[0]->N_RB_DL == 6) {
openair0_cfg[card].sample_rate=1.92e6; openair0_cfg[card].sample_rate=1.92e6;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment