Commit dbb20c23 authored by Raymond Knopp's avatar Raymond Knopp

removal of ITTI messages eNB MAC->RRC

parent 0fccd994
......@@ -111,7 +111,7 @@ mac_rrc_data_req(
RC.rrc[Mod_idP]->carrier[CC_id].SIB1,
RC.rrc[Mod_idP]->carrier[CC_id].sizeof_SIB1);
#if defined(ENABLE_ITTI)
#if 0 //defined(ENABLE_ITTI)
{
MessageDef *message_p;
int sib1_size = RC.rrc[Mod_idP]->carrier[CC_id].sizeof_SIB1;
......@@ -152,7 +152,7 @@ mac_rrc_data_req(
RC.rrc[Mod_idP]->carrier[CC_id].SIB23,
RC.rrc[Mod_idP]->carrier[CC_id].sizeof_SIB23);
#if defined(ENABLE_ITTI)
#if 0 //defined(ENABLE_ITTI)
{
MessageDef *message_p;
int sib23_size = RC.rrc[Mod_idP]->carrier[CC_id].sizeof_SIB23;
......@@ -220,7 +220,7 @@ mac_rrc_data_req(
if(Srb_info->Tx_buffer.payload_size>0) { //Fill buffer
LOG_D(RRC,"[eNB %d] CCCH (%p) has %d bytes (dest: %p, src %p)\n",Mod_idP,Srb_info,Srb_info->Tx_buffer.payload_size,buffer_pP,Srb_info->Tx_buffer.Payload);
#if defined(ENABLE_ITTI)
#if 0 // defined(ENABLE_ITTI)
{
MessageDef *message_p;
int ccch_size = Srb_info->Tx_buffer.payload_size;
......@@ -258,7 +258,7 @@ mac_rrc_data_req(
}
#if defined(ENABLE_ITTI)
#if 0 // defined(ENABLE_ITTI)
{
MessageDef *message_p;
int mcch_size = RC.rrc[Mod_idP]->carrier[CC_id].sizeof_MCCH_MESSAGE[mbsfn_sync_area];
......
......@@ -140,7 +140,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "127.0.0.3";
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -150,10 +150,10 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24";
ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.5/24";
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.19/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.19/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......@@ -194,12 +194,15 @@ L1s = (
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
eNB_instances = [0];
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 125;
eNB_instances = [0];
}
);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment