Skip to content

O
OpenXG-RAN
Commit e27c3f3f authored by Florian Kaltenberger's avatar Florian Kaltenberger
Browse files
Options

Commiting compiled firmware for new bitstream. Backwards compatibility with... 

Commiting compiled firmware for new bitstream. Backwards compatibility with older bitstreams is ensured. 


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@4070 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent b91caeab
Hide whitespace changes
Inline Side-by-side
Showing with 70 additions and 33 deletions
targets/RTAI/USER/init_exmimo2.sh
View file @ e27c3f3f
#!/bin/bash
PCI=`lspci -m | grep Xilinx`
if [ -z "$PCI" ]; then
echo "No card found. Stopping!"
retur
fi
sudo rmmod openair_rf
sudo insmod $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom/openair_rf.ko
sudo mknod /dev/openair0 c 127 0
sudo chmod a+rw /dev/openair0
sleep 1
#$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR0_DIR/express-mimo/software/sdr/exmimo2/sdr_expressmimo2
if [ ! -e /dev/openair0 ]; then
sudo mknod /dev/openair0 c 127 0
sudo chmod a+rw /dev/openair0
fi
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2
DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
if [ $(($DEVICE%100)) == 8 ]; then
echo "Using firmware version 8"
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2
else
if [ $(($DEVICE%100)) == 9 ]; then
echo "Using firmware version 9"
#$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR0_DIR/express-mimo/software/sdr/exmimo2/sdr_expressmimo2
$OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v9
else
echo 'No corresponding firmware found'
return
fi
fi
sudo rmmod nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko
if [ $1 = "eNB" ]; then
if [ "$1" = "eNB" ]; then
echo "bring up oai0 interface for enb"
sudo ifconfig oai0 10.0.1.1 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.1 -t 10.0.1.9 -r 3
else
if [ $1 = "UE" ]; then
if [ "$1" = "UE" ]; then
echo "bring up oai0 interface for UE"
sudo ifconfig oai0 10.0.1.9 netmask 255.255.255.0 broadcast 10.0.1.255
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -s 10.0.1.9 -t 10.0.1.1 -r 3
......
targets/RTAI/USER/lte-softmodem.c
View file @ e27c3f3f
......@@ -897,8 +897,8 @@ int main(int argc, char **argv) {
u32 rf_mode_byp[4] = {22991,22991,22991,22991};
*/
u32 my_rf_mode = RXEN + TXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX + DMAMODE_TX;
u32 my_rf_mode2 = RXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX;
u32 rf_mode[4] = {my_rf_mode,my_rf_mode2,0,0};
u32 rf_mode_base = TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM;
u32 rf_mode[4] = {my_rf_mode,0,0,0};
u32 rf_local[4] = {8255000,8255000,8255000,8255000}; // UE zepto
//{8254617, 8254617, 8254617, 8254617}; //eNB khalifa
//{8255067,8254810,8257340,8257340}; // eNB PETRONAS
......@@ -1096,9 +1096,28 @@ int main(int argc, char **argv) {
frame_parms->Ncp_UL = 0;
frame_parms->Nid_cell = Nid_cell;
frame_parms->nushift = 0;
frame_parms->nb_antennas_tx_eNB = 1; //initial value overwritten by initial sync later
frame_parms->nb_antennas_tx = (UE_flag==0) ? 1 : 1;
frame_parms->nb_antennas_rx = (UE_flag==0) ? 1 : 1;
if (UE_flag==0) {
switch (transmission_mode) {
case 1:
frame_parms->nb_antennas_tx = 1;
frame_parms->nb_antennas_rx = 1;
break;
case 2:
case 5:
case 6:
frame_parms->nb_antennas_tx = 2;
frame_parms->nb_antennas_rx = 1;
break;
default:
printf("Unsupported transmission mode %d\n",transmission_mode);
exit(-1);
}
}
else { //UE_flag==1
frame_parms->nb_antennas_tx = 1;
frame_parms->nb_antennas_rx = 1;
}
frame_parms->nb_antennas_tx_eNB = (transmission_mode == 1) ? 1 : 2; //initial value overwritten by initial sync later
frame_parms->mode1_flag = (transmission_mode == 1) ? 1 : 0;
frame_parms->frame_type = 1;
frame_parms->tdd_config = 3;
......@@ -1269,7 +1288,7 @@ int main(int argc, char **argv) {
openair_daq_vars.ue_dl_rb_alloc=0x1fff;
openair_daq_vars.target_ue_dl_mcs=20;
openair_daq_vars.ue_ul_nb_rb=6;
openair_daq_vars.target_ue_ul_mcs=11;
openair_daq_vars.target_ue_ul_mcs=12;
// if AGC is off, the following values will be used
// for (i=0;i<4;i++)
......@@ -1309,13 +1328,24 @@ int main(int argc, char **argv) {
printf("Card %d: ExpressMIMO %d, HW Rev %d, SW Rev 0x%d\n", card, p_exmimo_id->board_exmimoversion, p_exmimo_id->board_hwrev, p_exmimo_id->board_swrev);
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = 0;
if (p_exmimo_id->board_swrev>=BOARD_SWREV_CNTL2)
p_exmimo_config->framing.eNB_flag = 0;
else
p_exmimo_config->framing.eNB_flag = !UE_flag;
p_exmimo_config->framing.tdd_config = DUPLEXMODE_FDD + TXRXSWITCH_LSB;
p_exmimo_config->framing.resampling_factor = 2;
for (ant=0;ant<max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant++)
p_exmimo_config->rf.rf_mode[ant] = rf_mode_base;
for (ant=0;ant<frame_parms->nb_antennas_tx;ant++)
p_exmimo_config->rf.rf_mode[ant] += (TXEN + DMAMODE_TX);
for (ant=0;ant<frame_parms->nb_antennas_rx;ant++)
p_exmimo_config->rf.rf_mode[ant] += (RXEN + DMAMODE_RX);
for (ant=max(frame_parms->nb_antennas_tx,frame_parms->nb_antennas_rx);ant<4;ant++) {
p_exmimo_config->rf.rf_mode[ant] = 0;
carrier_freq[ant] = 0; //this turns off all other LIMEs
}
carrier_freq[1] = 0; //don't use this LIME for card 1
carrier_freq[2] = 0; //don't use this LIME for card 1
carrier_freq[3] = 0; //don't use this LIME for card 1
for (ant = 0; ant<4; ant++) {
p_exmimo_config->rf.do_autocal[ant] = 1;
p_exmimo_config->rf.rf_freq_rx[ant] = carrier_freq[ant];
......@@ -1340,21 +1370,6 @@ int main(int argc, char **argv) {
p_exmimo_config->rf.rffe_gain_rxfinal[ant] = 63;
p_exmimo_config->rf.rffe_gain_rxlow[ant] = 63;
}
if (UE_flag) {
p_exmimo_config->rf.rf_mode[0] = my_rf_mode;
p_exmimo_config->rf.rf_mode[1] = 0;
//p_exmimo_config->rf.rf_mode[1] = my_rf_mode;
p_exmimo_config->rf.rf_mode[2] = 0;
p_exmimo_config->rf.rf_mode[3] = 0;
}
else {
p_exmimo_config->rf.rf_mode[0] = my_rf_mode;
p_exmimo_config->rf.rf_mode[1] = 0;
//p_exmimo_config->rf.rf_mode[1] = my_rf_mode;
p_exmimo_config->rf.rf_mode[2] = 0;
p_exmimo_config->rf.rf_mode[3] = 0;
}
dump_frame_parms(frame_parms);
......@@ -1410,7 +1425,7 @@ int main(int argc, char **argv) {
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++)
PHY_vars_UE_g[0]->lte_ue_common_vars.txdata[aa][i] = 0x00010001;
p_exmimo_config->framing.tdd_config = TXRXSWITCH_TESTRX;
//p_exmimo_config->framing.tdd_config = TXRXSWITCH_TESTRX;
}
else {
setup_eNB_buffers(PHY_vars_eNB_g[0],frame_parms,0);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment