Skip to content

O
OpenXG-RAN
Commit e7285feb authored by Cedric Roux's avatar Cedric Roux
Browse files
Options

Setup structure for calling CschedCellConfigReq. 

This is not correct, notably regarding SIB settings.
When openair (at least oaisim) calls mac_top_init the SIBs
are done generated yet. Their sizes are thus unknown.
We cheat.
parent 4e533244
Hide whitespace changes
Inline Side-by-side
Showing with 99 additions and 8 deletions
openair2/LAYER2/MAC/main.c
View file @ e7285feb
......@@ -70,9 +70,13 @@
#include "SCHED/defs.h"
#if FAPI
#include "ff-mac-common.h"
#include "ff-mac-csched-sap.h"
#include "ff-mac-sched-sap.h"
/* for enb_config_get() and Enb_properties_array_t */
#include "enb_config.h"
#endif
void dl_phy_sync_success(module_id_t module_idP,
frame_t frameP,
......@@ -353,18 +357,105 @@ int mac_top_init(int eMBMS_active, char *uecap_xer, uint8_t cba_group_active, ui
//end ALU's algo
#ifdef FAPI
/// setup FAPI interface
/* setup FAPI interface */
/* this should be done differently/somewhere else */
const Enb_properties_array_t *conf = enb_config_get();
for (i=0; i<NB_eNB_INST; i++) {
eNB_mac_inst[i].fapi = init_fapi();
AssertFatal(eNB_mac_inst[i].fapi != NULL, "error calling init_fapi()\n");
}
/* test code, to remove */
struct CschedCellConfigReqParameters p;
struct CschedCellConfigCnfParameters r;
CschedCellConfigReq(eNB_mac_inst[0].fapi->sched, &p);
CschedCellConfigCnf(eNB_mac_inst[0].fapi, &r);
if (r.result != ff_SUCCESS) abort();
struct CschedCellConfigReqParameters p;
struct CschedCellConfigCnfParameters r;
struct CschedCellConfigReqParametersListElement l;
struct SiMessageListElement_s sib23;
#if MAX_NUM_CCs > 1
#error we do not work with FAPI with more than 1 CC yet
#endif
p.nr_carriers = 1;
p.ccConfigList[0] = &l;
p.nr_vendorSpecificList = 0;
l.puschHoppingOffset = conf->properties[i]->pusch_hoppingOffset[0];
l.hoppingMode = conf->properties[i]->pusch_hoppingMode[0];
l.nSb = conf->properties[i]->pusch_n_SB[0];
switch (conf->properties[i]->phich_resource[0]) {
case oneSixth: l.phichResource = PHICH_R_ONE_SIXTH; break;
case half: l.phichResource = PHICH_R_HALF; break;
case one: l.phichResource = PHICH_R_ONE; break;
case two: l.phichResource = PHICH_R_TWO; break;
}
switch (conf->properties[i]->phich_duration[0]) {
case normal: l.phichDuration = ff_normal; break;
case extended: l.phichDuration = ff_extended; break;
}
l.initialNrOfPdcchOfdmSymbols = 0; LOG_W(MAC, "set initialNrOfPdcchOfdmSymbols to its real value\n");
l.siConfiguration.sfn = 0; LOG_W(MAC, "what to set for siConfiguration.sfn?\n");
/* when mac_top_init is called, the SIBs are not generated yet, so we don't
know their sizes. As a quick and dirty hack, let's hardcode them.
It's "safe" though because in openair2/RRC/LITE/rrc_eNB.c we crash
if the values are not the ones we put here */
/* the length of sib1 is hardcoded to 15, see also openair2/RRC/LITE/rrc_eNB.c */
l.siConfiguration.sib1Length = 15; LOG_W(MAC, "get the real siConfiguration.sib1Length\n");
l.siConfiguration.siWindowLength = 1; LOG_W(MAC, "get the real siConfiguration.siWindowLength\n");
l.siConfiguration.nrSI_Message_List = 1;
l.siConfiguration.siMessageList = &sib23;
sib23.periodicity = 8; LOG_W(MAC, "get the real sib23.periodicity\n");
/* the length of sib2/3 is hardcoded to 30, see also openair2/RRC/LITE/rrc_eNB.c */
sib23.length = 30; LOG_W(MAC, "get the real sib23.length\n");
l.ulBandwidth = conf->properties[i]->N_RB_DL[0];
l.dlBandwidth = conf->properties[i]->N_RB_DL[0];
switch (conf->properties[i]->prefix_type[0]) {
case NORMAL:
l.ulCyclicPrefixLength = ff_normal;
l.dlCyclicPrefixLength = ff_normal;
break;
case EXTENDED:
l.ulCyclicPrefixLength = ff_extended;
l.dlCyclicPrefixLength = ff_extended;
break;
}
l.antennaPortsCount = conf->properties[i]->nb_antennas_tx[0]; LOG_W(MAC, "is antennaPortsCount equal to nb_antennas_tx?\n");
switch (conf->properties[i]->frame_type[0]) {
case FDD: l.duplexMode = DFDD; break;
case TDD: l.duplexMode = DTDD; break;
}
l.subframeAssignment = conf->properties[i]->tdd_config[0];
l.specialSubframePatterns = conf->properties[i]->tdd_config_s[0];
#warning TODO: mbsfn stuff (when mbsfn_SubframeConfigPresent will be added to the structure CschedCellConfigReqParametersListElement)
l.prachConfigurationIndex = conf->properties[i]->prach_config_index[0];
l.prachFreqOffset = conf->properties[i]->prach_freq_offset[0];
l.raResponseWindowSize = conf->properties[i]->rach_raResponseWindowSize[0];
l.macContentionResolutionTimer = conf->properties[i]->rach_macContentionResolutionTimer[0];
l.maxHarqMsg3Tx = conf->properties[i]->rach_maxHARQ_Msg3Tx[0];
#warning TODO: get real n1PucchAn (fix pucch_n1_AN thing for Rel10, remove #ifndefs)
l.n1PucchAn = 0; //conf->properties[i]->pucch_n1_AN[0];
l.deltaPucchShift = conf->properties[i]->pucch_delta_shift[0];
l.nrbCqi = conf->properties[i]->pucch_nRB_CQI[0];
l.ncsAn = conf->properties[i]->pucch_nCS_AN[0];
#warning TODO: what about srs_enable of the config file (it's not in FAPI)?
l.srsSubframeConfiguration = conf->properties[i]->srs_SubframeConfig[0];
l.srsSubframeOffset = 0; LOG_W(MAC, "what value for srsSubframeOffset?\n");
l.srsBandwidthConfiguration = conf->properties[i]->srs_BandwidthConfig[0];
switch (conf->properties[i]->srs_MaxUpPts[0]) {
case TRUE: l.srsMaxUpPts = true; break;
case FALSE: l.srsMaxUpPts = false; break;
}
#warning TODO: what about srs_ackNackST of the config file (it's not in FAPI)?
switch (conf->properties[i]->pusch_enable64QAM[0]) {
case TRUE: l.enable64Qam = true; break;
case FALSE: l.enable64Qam = false; break;
}
l.carrierIndex = 0;
LOG_I(MAC, "calling CschedCellConfigReq\n");
CschedCellConfigReq(eNB_mac_inst[i].fapi->sched, &p);
LOG_I(MAC, "calling CschedCellConfigCnf\n");
CschedCellConfigCnf(eNB_mac_inst[i].fapi, &r);
if (r.result != ff_SUCCESS) { LOG_E(MAC, "CschedCellConfigCnf failed\n"); abort(); }
LOG_I(MAC, "CschedCellConfigCnf succeeded\n");
}
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment