Skip to content

O
OpenXG-RAN
Commit 25372aa7 authored by Florian Kaltenberger's avatar Florian Kaltenberger
Browse files
Options

setting pdsch_p_b parameter to 1 in all config files for 2 antenna ports

parent 48e81dda
Hide whitespace changes
Inline Side-by-side
Showing with 10 additions and 10 deletions
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf
View file @ 25372aa7
......@@ -137,7 +137,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.70";
mme_ip_address = ( { ipv4 = "192.168.12.212";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -147,9 +147,9 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth1";
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.150/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth1";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.150/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.100PRB.usrpb210.conf
View file @ 25372aa7
......@@ -51,7 +51,7 @@ eNBs =
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -30;
pdsch_p_b = 0;
pdsch_p_b = 1;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.100PRB.usrpx310.conf
View file @ 25372aa7
......@@ -50,7 +50,7 @@ eNBs =
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -23;
pdsch_p_b = 0;
pdsch_p_b = 1;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.50PRB.usrpb210.conf
View file @ 25372aa7
......@@ -51,7 +51,7 @@ eNBs =
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -27;
pdsch_p_b = 0;
pdsch_p_b = 1;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.50PRB.usrpx310.conf
View file @ 25372aa7
......@@ -50,7 +50,7 @@ eNBs =
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -19;
pdsch_p_b = 0;
pdsch_p_b = 1;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm2.usrpx310.conf
View file @ 25372aa7
......@@ -50,7 +50,7 @@ eNBs =
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -16;
pdsch_p_b = 0;
pdsch_p_b = 1;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm3.usrpb210.conf
View file @ 25372aa7
......@@ -51,7 +51,7 @@ eNBs =
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -24;
pdsch_p_b = 0;
pdsch_p_b = 1;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
......@@ -138,7 +138,7 @@ eNBs =
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.70";
mme_ip_address = ( { ipv4 = "192.168.12.212";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment