Time domain alloc type DLSCH

nfapi/open-nFAPI/nfapi/public_inc/nfapi_nr_interface.h

@@ -278,6 +278,13 @@ typedef enum {
   NFAPI_NR_SEARCH_SPACE_TYPE_UE_SPECIFIC
 } nfapi_nr_search_space_type_e;
 
+typedef enum {
+  NFAPI_NR_COMMON_SEARCH_SPACE_TYPE_0=0,
+  NFAPI_NR_COMMON_SEARCH_SPACE_TYPE_0A,
+  NFAPI_NR_COMMON_SEARCH_SPACE_TYPE_1,
+  NFAPI_NR_COMMON_SEARCH_SPACE_TYPE_2
+} nfapi_nr_common_search_space_type_e;
+
 typedef enum {
   NFAPI_NR_SSB_AND_CSET_MUX_PATTERN_TYPE1=0,
   NFAPI_NR_SSB_AND_CSET_MUX_PATTERN_TYPE2,
@@ -299,6 +306,12 @@ typedef enum {
   NFAPI_NR_CSET_ALL_CONTIGUOUS_RBS
 } nfapi_nr_coreset_precoder_granularity_type_e;
 
+typedef enum {
+  NFAPI_NR_PDSCH_TIME_DOMAIN_ALLOC_TYPE_DEFAULT_A=0,
+  NFAPI_NR_PDSCH_TIME_DOMAIN_ALLOC_TYPE_DEFAULT_B,
+  NFAPI_NR_PDSCH_TIME_DOMAIN_ALLOC_TYPE_DEFAULT_C
+} nfapi_nr_pdsch_time_domain_alloc_type_e;
+
 // P7 Sub Structures
 
 typedef struct {
@@ -406,7 +419,8 @@ typedef struct {
   uint8_t rnti_type;
   uint8_t dci_format;
   uint8_t config_type;
-  uint8_t search_space_type;  
+  uint8_t search_space_type;
+  uint8_t common_search_space_type;  
   uint8_t aggregation_level;
   uint8_t n_rb;
   uint8_t n_symb;

openair1/PHY/NR_TRANSPORT/nr_dlsch.c

+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+/*! \file PHY/LTE_TRANSPORT/dlsch_decoding.c
+* \brief Top-level routines for decoding  Turbo-coded (DLSCH) transport channels from 36-212, V8.6 2009-03
+* \author R. Knopp
+* \date 2011
+* \version 0.1
+* \company Eurecom
+* \email: knopp@eurecom.fr
+* \note
+* \warning
+*/

openair1/PHY/NR_TRANSPORT/nr_dlsch.h

+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+/*! \file PHY/LTE_TRANSPORT/defs.h
+* \brief data structures for PDSCH/DLSCH/PUSCH/ULSCH physical and transport channel descriptors (TX/RX)
+* \author R. Knopp
+* \date 2011
+* \version 0.1
+* \company Eurecom
+* \email: raymond.knopp@eurecom.fr, florian.kaltenberger@eurecom.fr, oscar.tonelli@yahoo.it
+* \note
+* \warning
+*/
+
+#include "PHY/defs_gNB.h"
+
+

openair1/PHY/NR_TRANSPORT/nr_dlsch_tools.c

+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+/*! \file PHY/LTE_TRANSPORT/dlsch_decoding.c
+* \brief Top-level routines for decoding  Turbo-coded (DLSCH) transport channels from 36-212, V8.6 2009-03
+* \author R. Knopp
+* \date 2011
+* \version 0.1
+* \company Eurecom
+* \email: knopp@eurecom.fr
+* \note
+* \warning
+*/
+
+#include "nr_dlsch.h"
+
+void nr_get_time_domain_allocation_type(nfapi_nr_config_request_t config,
+                                        NR_gNB_DCI_ALLOC_t dci_alloc,
+                                        NR_gNB_DLSCH_t* dlsch) {
+
+  nfapi_nr_ssb_and_cset_mux_pattern_type_e mux_pattern = dci_alloc.mux_pattern;
+
+  switch(dci_alloc.rnti_type) {    
+
+    case NFAPI_NR_RNTI_SI:
+      AssertFatal(dci_alloc.pdcch_params.common_search_space_type == NFAPI_NR_COMMON_SEARCH_SPACE_TYPE_0,
+      "Invalid common search space type %d for SI RNTI, expected %d\n",
+      dci_alloc.pdcch_params.common_search_space_type, NFAPI_NR_COMMON_SEARCH_SPACE_TYPE_0);
+      dlsch->time_alloc_type = (mux_pattern == NFAPI_NR_SSB_AND_CSET_MUX_PATTERN_TYPE1)?NFAPI_NR_PDSCH_TIME_DOMAIN_ALLOC_TYPE_DEFAULT_A :
+                               (mux_pattern == NFAPI_NR_SSB_AND_CSET_MUX_PATTERN_TYPE2)?NFAPI_NR_PDSCH_TIME_DOMAIN_ALLOC_TYPE_DEFAULT_B :
+                               (mux_pattern == NFAPI_NR_SSB_AND_CSET_MUX_PATTERN_TYPE3)?NFAPI_NR_PDSCH_TIME_DOMAIN_ALLOC_TYPE_DEFAULT_C;
+      break;
+
+    case NFAPI_NR_RNTI_RA:
+    case NFAPI_NR_RNTI_TC:
+      /*AssertFatal(dci_alloc.pdcch_params.common_search_space_type == NFAPI_NR_COMMON_SEARCH_SPACE_TYPE_1,
+      "Invalid common search space type %d for RNTI %d, expected %d\n",dci_alloc.pdcch_params.common_search_space_type,
+      NFAPI_NR_COMMON_SEARCH_SPACE_TYPE_1, dci_alloc.rnti_type);*/
+      if (!dlsch->time_alloc_list_flag)
+        dlsch->time_alloc_type = NFAPI_NR_PDSCH_TIME_DOMAIN_ALLOC_TYPE_DEFAULT_A;
+      break;
+
+    case NFAPI_NR_RNTI_P:
+      break;
+
+    case NFAPI_NR_RNTI_C:
+    case NFAPI_NR_RNTI_CS:
+      if ()
+      break;
+
+    case
+
+
+  }
+}
+
+

openair1/PHY/defs_gNB.h

@@ -64,6 +64,143 @@ typedef struct {
   NR_gNB_DCI_ALLOC_t dci_alloc[256];
 } NR_gNB_PDCCH;
 
+
+typedef struct {
+/*  /// Status Flag indicating for this DLSCH (idle,active,disabled)
+  //SCH_status_t status;
+  /// Transport block size
+  uint32_t TBS;
+  /// pointer to pdu from MAC interface (this is "a" in 36.212)
+  uint8_t *pdu;
+  /// The payload + CRC size in bits, "B" from 36-212
+  uint32_t B;
+  /// Pointer to the payload
+  uint8_t *b;
+  /// Pointers to transport block segments
+  uint8_t *c[MAX_NUM_DLSCH_SEGMENTS];
+  /// RTC values for each segment (for definition see 36-212 V8.6 2009-03, p.15)
+  uint32_t RTC[MAX_NUM_DLSCH_SEGMENTS];
+  /// Frame where current HARQ round was sent
+  uint32_t frame;
+  /// Subframe where current HARQ round was sent
+  uint32_t subframe;
+  /// Index of current HARQ round for this DLSCH
+  uint8_t round;
+  /// Modulation order
+  uint8_t Qm;
+  /// MCS
+  uint8_t mcs;
+  /// Redundancy-version of the current sub-frame
+  uint8_t rvidx;
+  /// MIMO mode for this DLSCH
+  MIMO_mode_t mimo_mode;
+  /// Current RB allocation
+  uint32_t rb_alloc[4];
+  /// distributed/localized flag
+  vrb_t vrb_type;
+  /// Current subband PMI allocation
+  uint16_t pmi_alloc;
+  /// Current subband RI allocation
+  uint32_t ri_alloc;
+  /// Current subband CQI1 allocation
+  uint32_t cqi_alloc1;
+  /// Current subband CQI2 allocation
+  uint32_t cqi_alloc2;
+  /// Current Number of RBs
+  uint16_t nb_rb;
+  /// Current NDI
+  uint8_t ndi;
+  /// downlink power offset field
+  uint8_t dl_power_off;
+  /// start symbold of pdsch
+  uint8_t pdsch_start;
+  /// Concatenated "e"-sequences (for definition see 36-212 V8.6 2009-03, p.17-18)
+  uint8_t e[MAX_NUM_CHANNEL_BITS] __attribute__((aligned(32)));
+  /// Turbo-code outputs (36-212 V8.6 2009-03, p.12
+  uint8_t *d[MAX_NUM_DLSCH_SEGMENTS];//[(96+3+(3*6144))];
+  /// Sub-block interleaver outputs (36-212 V8.6 2009-03, p.16-17)
+  uint8_t w[MAX_NUM_DLSCH_SEGMENTS][3*6144];
+  /// Number of code segments (for definition see 36-212 V8.6 2009-03, p.9)
+  uint32_t C;
+  /// Number of "small" code segments (for definition see 36-212 V8.6 2009-03, p.10)
+  uint32_t Cminus;
+  /// Number of "large" code segments (for definition see 36-212 V8.6 2009-03, p.10)
+  uint32_t Cplus;
+  /// Number of bits in "small" code segments (<6144) (for definition see 36-212 V8.6 2009-03, p.10)
+  uint32_t Kminus;
+  /// Number of bits in "large" code segments (<6144) (for definition see 36-212 V8.6 2009-03, p.10)
+  uint32_t Kplus;
+  /// Number of "Filler" bits (for definition see 36-212 V8.6 2009-03, p.10)
+  uint32_t F;
+  /// Number of MIMO layers (streams) (for definition see 36-212 V8.6 2009-03, p.17, TM3-4)
+  uint8_t Nl;
+  /// Number of layers for this PDSCH transmission (TM8-10)
+  uint8_t Nlayers;
+  /// First layer for this PSCH transmission
+  uint8_t first_layer;
+  /// codeword this transport block is mapped to
+  uint8_t codeword;*/
+} NR_DL_gNB_HARQ_t;
+
+
+typedef struct {
+
+  /// Pointers to 8 HARQ processes for the DLSCH
+  LTE_DL_eNB_HARQ_t *harq_processes[8];
+  nfapi_nr_pdsch_time_domain_alloc_type_e time_alloc_type;
+  uint8_t time_alloc_list_flag;
+
+
+//LTE remainders to be removed
+/*  /// TX buffers for UE-spec transmission (antenna ports 5 or 7..14, prior to precoding)
+  int32_t *txdataF[8];
+  /// beamforming weights for UE-spec transmission (antenna ports 5 or 7..14), for each codeword, maximum 4 layers?
+  int32_t **ue_spec_bf_weights[4]; 
+  /// dl channel estimates (estimated from ul channel estimates)
+  int32_t **calib_dl_ch_estimates;
+  /// Allocated RNTI (0 means DLSCH_t is not currently used)
+  uint16_t rnti;
+  /// Active flag for baseband transmitter processing
+  uint8_t active;
+  /// HARQ process mask, indicates which processes are currently active
+  uint16_t harq_mask;
+  /// Indicator of TX activation per subframe.  Used during PUCCH detection for ACK/NAK.
+  uint8_t subframe_tx[10];
+  /// First CCE of last PDSCH scheduling per subframe.  Again used during PUCCH detection for ACK/NAK.
+  uint8_t nCCE[10];
+  /// Process ID's per subframe.  Used to associate received ACKs on PUSCH/PUCCH to DLSCH harq process ids
+  uint8_t harq_ids[10];
+  /// Window size (in outgoing transport blocks) for fine-grain rate adaptation
+  uint8_t ra_window_size;
+  /// First-round error threshold for fine-grain rate adaptation
+  uint8_t error_threshold;
+
+  /// Number of soft channel bits
+  uint32_t G;
+  /// Codebook index for this dlsch (0,1,2,3)
+  uint8_t codebook_index;
+  /// Maximum number of HARQ processes (for definition see 36-212 V8.6 2009-03, p.17)
+  uint8_t Mdlharq;
+  /// Maximum number of HARQ rounds
+  uint8_t Mlimit;
+  /// MIMO transmission mode indicator for this sub-frame (for definition see 36-212 V8.6 2009-03, p.17)
+  uint8_t Kmimo;
+  /// Nsoft parameter related to UE Category
+  uint32_t Nsoft;
+  /// amplitude of PDSCH (compared to RS) in symbols without pilots
+  int16_t sqrt_rho_a;
+  /// amplitude of PDSCH (compared to RS) in symbols containing pilots
+  int16_t sqrt_rho_b;
+#ifdef Rel14
+  /// indicator that this DLSCH corresponds to SIB1-BR, needed for c_init for scrambling
+  uint8_t sib1_br_flag;
+  /// initial absolute subframe (see 36.211 Section 6.3.1), needed for c_init for scrambling
+  uint16_t i0;
+  CEmode_t CEmode;
+#endif*/
+} NR_gNB_DLSCH_t;
+
+
 typedef struct {
   /// \brief Pointers (dynamic) to the received data in the time domain.
   /// - first index: rx antenna [0..nb_antennas_rx[
@@ -295,11 +432,11 @@ typedef struct PHY_VARS_gNB_s {
   LTE_eNB_SRS          srs_vars[NUMBER_OF_UE_MAX];
   LTE_eNB_PUSCH       *pusch_vars[NUMBER_OF_UE_MAX];
   LTE_eNB_PRACH        prach_vars;
-  LTE_eNB_DLSCH_t     *dlsch[NUMBER_OF_UE_MAX][2];   // Nusers times two spatial streams
+  NR_gNB_DLSCH_t     *dlsch[NUMBER_OF_UE_MAX][2];   // Nusers times two spatial streams
   LTE_eNB_ULSCH_t     *ulsch[NUMBER_OF_UE_MAX+1];      // Nusers + number of RA
-  LTE_eNB_DLSCH_t     *dlsch_SI,*dlsch_ra,*dlsch_p;
-  LTE_eNB_DLSCH_t     *dlsch_MCH;
-  LTE_eNB_DLSCH_t     *dlsch_PCH;
+  NR_gNB_DLSCH_t     *dlsch_SI,*dlsch_ra,*dlsch_p;
+  NR_gNB_DLSCH_t     *dlsch_MCH;
+  NR_gNB_DLSCH_t     *dlsch_PCH;
   LTE_eNB_UE_stats     UE_stats[NUMBER_OF_UE_MAX];
   LTE_eNB_UE_stats    *UE_stats_ptr[NUMBER_OF_UE_MAX];
 

openair1/SCHED_NR/phy_procedures_nr_common.c

@@ -166,6 +166,8 @@ void nr_configure_css_dci_from_mib(nfapi_nr_dl_config_pdcch_parameters_rel15_t*
       AssertFatal(1==0, "Invalid SSB and coreset multiplexing pattern %d\n", pdcch_params->mux_pattern);
   }
   pdcch_params->config_type = NFAPI_NR_CSET_CONFIG_MIB_SIB1;
+  pdcch_params->search_space_type = NFAPI_NR_SEARCH_SPACE_TYPE_COMMON;
+  pdcch_params->common_search_space_type = NFAPI_NR_COMMON_SEARCH_SPACE_TYPE_0;
   pdcch_params->cr_mapping_type = NFAPI_NR_CCE_REG_MAPPING_INTERLEAVED;
   pdcch_params->precoder_granularity = NFAPI_NR_CSET_SAME_AS_REG_BUNDLE;
   pdcch_params->reg_bundle_size = 6;

targets/RT/USER/nr-softmodem.c

@@ -351,11 +351,11 @@ void reset_stats(FL_OBJECT *button, long arg)
 
   for (i=0; i<NUMBER_OF_UE_MAX; i++) {
     for (k=0; k<8; k++) { //harq_processes
-      for (j=0; j<phy_vars_gNB->dlsch[i][0]->Mlimit; j++) {
+/*      for (j=0; j<phy_vars_gNB->dlsch[i][0]->Mlimit; j++) {
 	phy_vars_gNB->UE_stats[i].dlsch_NAK[k][j]=0;
 	phy_vars_gNB->UE_stats[i].dlsch_ACK[k][j]=0;
 	phy_vars_gNB->UE_stats[i].dlsch_trials[k][j]=0;
-      }
+      }*/
 
       phy_vars_gNB->UE_stats[i].dlsch_l2_errors[k]=0;
       phy_vars_gNB->UE_stats[i].ulsch_errors[k]=0;