Skip to content

O
OpenXG-RAN
Commit 49e9baee authored by Francesco Mani's avatar Francesco Mani
Browse files
Options

brute force ssb detection

parent 353f1533
Hide whitespace changes
Inline Side-by-side
Showing with 87 additions and 72 deletions
nfapi/open-nFAPI/nfapi/public_inc/nfapi_nr_interface.h
View file @ 49e9baee
......@@ -75,7 +75,7 @@ typedef struct
// These TLVs are used by the VNF to configure the RF in the PNF
// nfapi_uint16_tlv_t max_transmit_power;
nfapi_uint16_tlv_t nrarfcn;
nfapi_uint32_tlv_t nrarfcn;
// nfapi_nmm_frequency_bands_t nmm_gsm_frequency_bands;
// nfapi_nmm_frequency_bands_t nmm_umts_frequency_bands;
......
openair1/PHY/INIT/nr_init.c
View file @ 49e9baee
......@@ -363,7 +363,7 @@ void nr_phy_config_request_sim(PHY_VARS_gNB *gNB,int N_RB_DL,int N_RB_UL,int mu,
NR_DL_FRAME_PARMS *fp = &gNB->frame_parms;
nfapi_nr_config_request_t *gNB_config = &gNB->gNB_config;
//overwrite for new NR parameters
gNB_config->nfapi_config.rf_bands.rf_band[0] = 5;
gNB_config->nfapi_config.rf_bands.rf_band[0] = 78;
gNB_config->nfapi_config.nrarfcn.value = 620000;
gNB_config->subframe_config.numerology_index_mu.value = mu;
gNB_config->subframe_config.duplex_mode.value = TDD;
......@@ -377,12 +377,13 @@ void nr_phy_config_request_sim(PHY_VARS_gNB *gNB,int N_RB_DL,int N_RB_UL,int mu,
gNB_config->sch_config.ssb_scg_position_in_burst.value=position_in_burst;
gNB->mac_enabled = 1;
fp->dl_CarrierFreq = from_nrarfcn(gNB_config->nfapi_config.rf_bands.rf_band[0],gNB_config->nfapi_config.nrarfcn.value);
fp->ul_CarrierFreq = fp->dl_CarrierFreq - (get_uldl_offset(gNB_config->nfapi_config.rf_bands.rf_band[0])*100000);
fp->dl_CarrierFreq = 3500000000;//from_nrarfcn(gNB_config->nfapi_config.rf_bands.rf_band[0],gNB_config->nfapi_config.nrarfcn.value);
fp->ul_CarrierFreq = 3500000000;//fp->dl_CarrierFreq - (get_uldl_offset(gNB_config->nfapi_config.rf_bands.rf_band[0])*100000);
fp->threequarter_fs = 0;
nr_init_frame_parms(gNB_config, fp);
gNB->configured = 1;
LOG_I(PHY,"gNB configured\n");
}
......
openair1/PHY/MODULATION/slot_fep_nr.c
View file @ 49e9baee
......@@ -45,8 +45,16 @@ int nr_slot_fep(PHY_VARS_NR_UE *ue,
NR_UE_COMMON *common_vars = &ue->common_vars;
unsigned char aa;
unsigned char symbol = l;//+((7-frame_parms->Ncp)*(Ns&1)); ///symbol within sub-frame
unsigned int nb_prefix_samples = (no_prefix ? 0 : frame_parms->nb_prefix_samples);
unsigned int nb_prefix_samples0 = (no_prefix ? 0 : frame_parms->nb_prefix_samples0);
unsigned int nb_prefix_samples;
unsigned int nb_prefix_samples0;
if (ue->is_synchronized) {
nb_prefix_samples = (no_prefix ? 0 : frame_parms->nb_prefix_samples);
nb_prefix_samples0 = (no_prefix ? 0 : frame_parms->nb_prefix_samples0);
}
else {
nb_prefix_samples = (no_prefix ? 0 : frame_parms->nb_prefix_samples);
nb_prefix_samples0 = (no_prefix ? 0 : frame_parms->nb_prefix_samples);
}
//unsigned int subframe_offset;//,subframe_offset_F;
unsigned int slot_offset;
//int i;
......
openair1/PHY/NR_UE_ESTIMATION/nr_dl_channel_estimation.c
View file @ 49e9baee
......@@ -32,6 +32,7 @@
//#define DEBUG_PDCCH
int nr_pbch_channel_estimation(PHY_VARS_NR_UE *ue,
uint8_t eNB_offset,
unsigned char Ns,
......@@ -47,13 +48,14 @@ int nr_pbch_channel_estimation(PHY_VARS_NR_UE *ue,
//uint16_t Nid_cell = (eNB_offset == 0) ? ue->frame_parms.Nid_cell : ue->measurements.adj_cell_id[eNB_offset-1];
uint8_t nushift, ssb_index=0, n_hf=0;
uint8_t nushift;
uint8_t ssb_index=ue->i_ssb;
uint8_t n_hf=ue->n_hf;
int **dl_ch_estimates =ue->common_vars.common_vars_rx_data_per_thread[ue->current_thread_id[Ns>>1]].dl_ch_estimates[eNB_offset];
int **rxdataF=ue->common_vars.common_vars_rx_data_per_thread[ue->current_thread_id[Ns>>1]].rxdataF;
nushift = ue->frame_parms.Nid_cell%4;
ue->frame_parms.nushift = nushift;
unsigned int ssb_offset = ue->frame_parms.first_carrier_offset + ue->frame_parms.ssb_start_subcarrier;
if (ssb_offset>= ue->frame_parms.ofdm_symbol_size) ssb_offset-=ue->frame_parms.ofdm_symbol_size;
......@@ -120,7 +122,7 @@ int nr_pbch_channel_estimation(PHY_VARS_NR_UE *ue,
pil = (int16_t *)&pilot[0];
rxF = (int16_t *)&rxdataF[aarx][(symbol_offset+k+re_offset)];
dl_ch = (int16_t *)&dl_ch_estimates[aarx][ch_offset];
memset(dl_ch,0,4*(ue->frame_parms.ofdm_symbol_size));
if (ue->high_speed_flag==0) // multiply previous channel estimate by ch_est_alpha
multadd_complex_vector_real_scalar(dl_ch-(ue->frame_parms.ofdm_symbol_size<<1),
......@@ -137,6 +139,7 @@ int nr_pbch_channel_estimation(PHY_VARS_NR_UE *ue,
// Treat first 2 pilots specially (left edge)
ch[0] = (int16_t)(((int32_t)pil[0]*rxF[0] - (int32_t)pil[1]*rxF[1])>>15);
ch[1] = (int16_t)(((int32_t)pil[0]*rxF[1] + (int32_t)pil[1]*rxF[0])>>15);
#ifdef DEBUG_CH
printf("ch 0 %d\n",((int32_t)pil[0]*rxF[0] - (int32_t)pil[1]*rxF[1]));
printf("pilot 0 : rxF - > (%d,%d) addr %p ch -> (%d,%d), pil -> (%d,%d) \n",rxF[0],rxF[1],&rxF[0],ch[0],ch[1],pil[0],pil[1]);
......@@ -154,6 +157,8 @@ int nr_pbch_channel_estimation(PHY_VARS_NR_UE *ue,
ch[0] = (int16_t)(((int32_t)pil[0]*rxF[0] - (int32_t)pil[1]*rxF[1])>>15);
ch[1] = (int16_t)(((int32_t)pil[0]*rxF[1] + (int32_t)pil[1]*rxF[0])>>15);
#ifdef DEBUG_CH
printf("pilot 1 : rxF - > (%d,%d) ch -> (%d,%d), pil -> (%d,%d) \n",rxF[0],rxF[1],ch[0],ch[1],pil[0],pil[1]);
#endif
......@@ -165,9 +170,6 @@ int nr_pbch_channel_estimation(PHY_VARS_NR_UE *ue,
re_offset = (re_offset+4)&(ue->frame_parms.ofdm_symbol_size-1);
rxF = (int16_t *)&rxdataF[aarx][(symbol_offset+k+re_offset)];
ch[0] = (int16_t)(((int32_t)pil[0]*rxF[0] - (int32_t)pil[1]*rxF[1])>>15);
ch[1] = (int16_t)(((int32_t)pil[0]*rxF[1] + (int32_t)pil[1]*rxF[0])>>15);
#ifdef DEBUG_CH
printf("pilot 2 : rxF - > (%d,%d) ch -> (%d,%d), pil -> (%d,%d) \n",rxF[0],rxF[1],ch[0],ch[1],pil[0],pil[1]);
#endif
......@@ -195,6 +197,7 @@ int nr_pbch_channel_estimation(PHY_VARS_NR_UE *ue,
}
ch[0] = (int16_t)(((int32_t)pil[0]*rxF[0] - (int32_t)pil[1]*rxF[1])>>15);
ch[1] = (int16_t)(((int32_t)pil[0]*rxF[1] + (int32_t)pil[1]*rxF[0])>>15);
#ifdef DEBUG_CH
printf("pilot %d : rxF - > (%d,%d) ch -> (%d,%d), pil -> (%d,%d) \n",pilot_cnt,rxF[0],rxF[1],ch[0],ch[1],pil[0],pil[1]);
#endif
......@@ -213,6 +216,7 @@ int nr_pbch_channel_estimation(PHY_VARS_NR_UE *ue,
ch[0] = (int16_t)(((int32_t)pil[0]*rxF[0] - (int32_t)pil[1]*rxF[1])>>15);
ch[1] = (int16_t)(((int32_t)pil[0]*rxF[1] + (int32_t)pil[1]*rxF[0])>>15);
#ifdef DEBUG_CH
printf("pilot %d : rxF - > (%d,%d) ch -> (%d,%d), pil -> (%d,%d) \n",pilot_cnt+1,rxF[0],rxF[1],ch[0],ch[1],pil[0],pil[1]);
#endif
......@@ -247,7 +251,6 @@ int nr_pbch_channel_estimation(PHY_VARS_NR_UE *ue,
//}
}
return(0);
}
......
openair1/PHY/NR_UE_ESTIMATION/nr_estimation.h
View file @ 49e9baee
......@@ -51,9 +51,9 @@ int nr_pdcch_channel_estimation(PHY_VARS_NR_UE *ue,
unsigned short nb_rb_coreset);
int nr_pbch_channel_estimation(PHY_VARS_NR_UE *ue,
uint8_t eNB_offset,
unsigned char Ns,
unsigned char symbol);
uint8_t eNB_offset,
unsigned char Ns,
unsigned char symbol);
int nr_pdsch_channel_estimation(PHY_VARS_NR_UE *ue,
uint8_t eNB_offset,
......@@ -61,8 +61,9 @@ int nr_pdsch_channel_estimation(PHY_VARS_NR_UE *ue,
unsigned short p,
unsigned char l,
unsigned char symbol,
unsigned short bwp_start_subcarrier,
unsigned short nb_rb_pdsch);
unsigned short bwp_start_subcarrier,
unsigned short nb_rb_pdsch);
void nr_adjust_synch_ue(NR_DL_FRAME_PARMS *frame_parms,
PHY_VARS_NR_UE *ue,
......
openair1/PHY/NR_UE_TRANSPORT/nr_initial_sync.c
View file @ 49e9baee
......@@ -53,48 +53,48 @@ int cnt=0;
#define DEBUG_INITIAL_SYNCH
int nr_pbch_detection(PHY_VARS_NR_UE *ue, runmode_t mode)
int nr_pbch_detection(PHY_VARS_NR_UE *ue, int pbch_initial_symbol, runmode_t mode)
{
NR_DL_FRAME_PARMS *frame_parms=&ue->frame_parms;
int ret =-1;
#ifdef DEBUG_INITIAL_SYNCH
LOG_I(PHY,"[UE%d] Initial sync: starting PBCH detection (rx_offset %d)\n",ue->Mod_id,
ue->rx_offset);
#endif
// save the nb_prefix_samples0 since we are not synchronized to subframes yet and the SSB has all symbols with nb_prefix_samples
int nb_prefix_samples0 = frame_parms->nb_prefix_samples0;
frame_parms->nb_prefix_samples0 = frame_parms->nb_prefix_samples;
uint8_t N_L = (frame_parms->Lmax == 4)? 4:8;
uint8_t N_hf = (frame_parms->Lmax == 4)? 2:1;
// loops over possible pbch dmrs cases to retrive best estimated i_ssb (and n_hf for Lmax=4) for multiple ssb detection
for (int hf = 0; hf < N_hf; hf++) {
for (int l = 0; l < N_L ; l++) {
if (ret !=0) {
ue->i_ssb = l;
ue->n_hf = hf;
for(int i=1; i<4;i++) {
#if UE_TIMING_TRACE
start_meas(&ue->dlsch_channel_estimation_stats);
start_meas(&ue->dlsch_channel_estimation_stats);
#endif
nr_pbch_channel_estimation(ue,0,
0,
i);
for(int i=pbch_initial_symbol; i<pbch_initial_symbol+3;i++)
nr_pbch_channel_estimation(ue,0,0,i);
#if UE_TIMING_TRACE
stop_meas(&ue->dlsch_channel_estimation_stats);
stop_meas(&ue->dlsch_channel_estimation_stats);
#endif
ret = nr_rx_pbch(ue,
&ue->proc.proc_rxtx[0],
ue->pbch_vars[0],
frame_parms,
0,
SISO,
ue->high_speed_flag);
}
}
}
//put back nb_prefix_samples0
frame_parms->nb_prefix_samples0 = nb_prefix_samples0;
ret = nr_rx_pbch(ue,
&ue->proc.proc_rxtx[0],
ue->pbch_vars[0],
frame_parms,
0,
SISO,
ue->high_speed_flag);
if (ret==0) {
frame_parms->nb_antenna_ports_eNB = 1; //pbch_tx_ant;
......@@ -211,6 +211,14 @@ int nr_initial_sync(PHY_VARS_NR_UE *ue, runmode_t mode)
/* check that SSS/PBCH block is continuous inside the received buffer */
if (sync_pos < (NR_NUMBER_OF_SUBFRAMES_PER_FRAME*fp->samples_per_subframe - (NB_SYMBOLS_PBCH * fp->ofdm_symbol_size))) {
/* slop_fep function works for lte and takes into account begining of frame with prefix for subframe 0 */
/* for NR this is not the case but slot_fep is still used for computing FFT of samples */
/* in order to achieve correct processing for NR prefix samples is forced to 0 and then restored after function call */
/* symbol number are from beginning of SS/PBCH blocks as below: */
/* Signal PSS PBCH SSS PBCH */
/* symbol number 0 1 2 3 */
/* time samples in buffer rxdata are used as input of FFT -> FFT results are stored in the frequency buffer rxdataF */
/* rxdataF stores SS/PBCH from beginning of buffers in the same symbol order as in time domain */
for(int i=0; i<4;i++)
nr_slot_fep(ue,
......@@ -230,7 +238,7 @@ int nr_initial_sync(PHY_VARS_NR_UE *ue, runmode_t mode)
//nr_init_frame_parms_ue(fp,NR_MU_1,NORMAL,n_ssb_crb,0);
nr_gold_pbch(ue);
ret = nr_pbch_detection(ue,mode);
ret = nr_pbch_detection(ue,1,mode); // start pbch detection at first symbol after pss
nr_gold_pdcch(ue,0, 2);
/*
......
openair1/PHY/NR_UE_TRANSPORT/nr_pbch.c
View file @ 49e9baee
......@@ -426,7 +426,7 @@ int nr_rx_pbch( PHY_VARS_NR_UE *ue,
uint8_t nushift;
uint16_t M;
uint8_t Lmax=frame_parms->Lmax;
uint8_t ssb_index=0;
uint8_t ssb_index=ue->i_ssb;
//uint16_t crc;
//unsigned short idx_demod =0;
uint32_t decoderState=0;
......
openair1/PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h
View file @ 49e9baee
......@@ -1125,6 +1125,10 @@ int nr_rx_pbch( PHY_VARS_NR_UE *ue,
MIMO_mode_t mimo_mode,
uint32_t high_speed_flag);
int nr_pbch_detection(PHY_VARS_NR_UE *ue,
int pbch_initial_symbol,
runmode_t mode);
uint16_t rx_pbch_emul(PHY_VARS_NR_UE *phy_vars_ue,
uint8_t eNB_id,
uint8_t pbch_phase);
......
openair1/PHY/NR_UE_TRANSPORT/sss_nr.c
View file @ 49e9baee
......@@ -430,21 +430,6 @@ int rx_sss_nr(PHY_VARS_NR_UE *ue, int32_t *tot_metric,uint8_t *phase_max)
int32_t metric, metric_re;
int16_t *d;
/* slop_fep function works for lte and takes into account begining of frame with prefix for subframe 0 */
/* for NR this is not the case but slot_fep is still used for computing FFT of samples */
/* in order to achieve correct processing for NR prefix samples is forced to 0 and then restored after function call */
/* symbol number are from beginning of SS/PBCH blocks as below: */
/* Signal PSS PBCH SSS PBCH */
/* symbol number 0 1 2 3 */
/* time samples in buffer rxdata are used as input of FFT -> FFT results are stored in the frequency buffer rxdataF */
/* rxdataF stores SS/PBCH from beginning of buffers in the same symbol order as in time domain */
int nb_prefix_samples0 = frame_parms->nb_prefix_samples0;
// For now, symbol 0 = PSS/PBCH and it is never in symbol 0 or 7*2^mu (i.e. always shorter prefix)
frame_parms->nb_prefix_samples0 = frame_parms->nb_prefix_samples;
frame_parms->nb_prefix_samples0 = nb_prefix_samples0;
// pss sss extraction
pss_sss_extract_nr(ue,
......
openair1/PHY/defs_nr_UE.h
View file @ 49e9baee
......@@ -1143,6 +1143,8 @@ typedef struct {
uint8_t decode_MIB;
/// temporary offset during cell search prior to MIB decoding
int ssb_offset;
uint8_t i_ssb;
uint8_t n_hf;
int rx_offset; /// Timing offset
int rx_offset_diff; /// Timing adjustment for ofdm symbol0 on HW USRP
int time_sync_cell;
......@@ -1307,6 +1309,7 @@ typedef struct {
} PHY_VARS_NR_UE;
/* this structure is used to pass both UE phy vars and
* proc to the function UE_thread_rxn_txnp4
*/
......
openair1/SCHED_NR_UE/phy_procedures_nr_ue.c
View file @ 49e9baee
......@@ -5098,14 +5098,23 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *proc,uint8_t eN
if ( (nr_tti_rx == 0) && (ue->decode_MIB == 1))
{
LOG_D(PHY," ------ PBCH ChannelComp/LLR: frame.slot %d.%d ------ \n", frame_rx%1024, nr_tti_rx);
for (int i=0; i<3; i++)
for (int i=0; i<3; i++) {
nr_slot_fep(ue,
(5+i), //mu=1 case B
nr_tti_rx,
0,
0,
NR_PBCH_EST);
#if UE_TIMING_TRACE
start_meas(&ue->dlsch_channel_estimation_stats);
#endif
nr_pbch_channel_estimation(ue,0,0,5+i);
#if UE_TIMING_TRACE
stop_meas(&ue->dlsch_channel_estimation_stats);
#endif
}
nr_ue_pbch_procedures(eNB_id,ue,proc,0);
}
......
openair1/SIMULATION/NR_PHY/pbchsim.c
View file @ 49e9baee
......@@ -372,7 +372,8 @@ int main(int argc, char **argv)
frame_parms->N_RB_DL = N_RB_DL;
frame_parms->N_RB_UL = N_RB_DL;
frame_parms->Nid_cell = Nid_cell;
frame_parms->ssb_type = nr_ssb_type_B;
frame_parms->nushift = Nid_cell%4;
frame_parms->ssb_type = nr_ssb_type_C;
nr_phy_config_request_sim(gNB,N_RB_DL,N_RB_DL,mu,Nid_cell,SSB_positions);
phy_init_nr_gNB(gNB,0,0);
......@@ -605,17 +606,9 @@ int main(int argc, char **argv)
0,
0,
NR_PBCH_EST);
nr_pbch_channel_estimation(UE,0,0,i);
}
ret = nr_rx_pbch(UE,
&UE->proc.proc_rxtx[0],
UE->pbch_vars[0],
frame_parms,
0,
SISO,
UE->high_speed_flag);
ret = nr_pbch_detection(UE,5,0); // start pbch detection from symbol 5 and mode 0
if (ret==0) {
//UE->rx_ind.rx_indication_body->mib_pdu.ssb_index; //not yet detected automatically
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment