Commit 571f07b4 authored by Lionel Gauthier's avatar Lionel Gauthier

For GTPUAH, GTPURH kernel modules

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6292 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 8c783bac
MME :
{
REALM = "pft";
# Define the limits of the system in terms of served eNB and served UE.
# When the limits will be reached, overload procedure will take place.
MAXENB = 10;
MAXUE = 100;
RELATIVE_CAPACITY = 10;
# Display statistics about whole system (expressed in seconds)
MME_STATISTIC_TIMER = 10;
EMERGENCY_ATTACH_SUPPORTED = "no";
UNAUTHENTICATED_IMSI_SUPPORTED = "no";
# VERBOSITY: none, info, annoying
VERBOSITY = "none";
IP_CAPABILITY = "IPV4V6";
INTERTASK_INTERFACE :
{
# max queue size per task
ITTI_QUEUE_SIZE = 2000000;
};
S6A :
{
# pwd=$OPENAIR_CN/objs
S6A_CONF = "./epc_s6a.conf";
};
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 32;
SCTP_OUTSTREAMS = 32;
};
# ------- S1AP definitions
S1AP :
{
# outcome drop timer value (seconds)
S1AP_OUTCOME_TIMER = 10;
};
# ------- MME served GUMMEI
GUMMEI :
{
# MME code DEFAULT = 0
# size = 8 bits
# maximum of 256 values, comma separated
MME_CODE = [ 1, 30 , 31, 32, 33, 34, 35, 36, 56 , 29 , 8 ];
# MME GROUP ID DEFAULT = 0
# size = 16 bits
# maximum of 65535 values, comma separated
MME_GID = [ 32768 , 4 , 5 , 30 , 8 , 9 , 50021 ];
# TA (mcc.mnc:tracking area code) DEFAULT = 208.34:0
# max values = 999.999:65535
# maximum of 32 values, comma separated
PLMN = (
{MCC="208" ; MNC="92"; TAC = "1"; },
{MCC="208" ; MNC="10"; TAC = "1"; },
{MCC="209" ; MNC="130"; TAC = "4"; },
{MCC="209" ; MNC="012"; TAC = "2"; },
{MCC="208" ; MNC="35"; TAC = "8"; }
);
};
NAS :
{
# 3GPP TS 33.401 section 7.2.4.3 Procedures for NAS algorithm selection
# decreasing preference goes from left to right
ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "EIA2" , "EIA1" , "EIA0" ];
ORDERED_SUPPORTED_CIPHERING_ALGORITHM_LIST = [ "EEA0" , "EEA1" , "EEA2" ];
};
NETWORK_INTERFACES :
{
MME_INTERFACE_NAME_FOR_S1_MME = "tun2";
MME_IPV4_ADDRESS_FOR_S1_MME = "192.188.2.2/24";
MME_INTERFACE_NAME_FOR_S11_MME = "none";
MME_IPV4_ADDRESS_FOR_S11_MME = "0.0.0.0/24";
};
};
S-GW :
{
NETWORK_INTERFACES :
{
SGW_INTERFACE_NAME_FOR_S11 = "none";
SGW_IPV4_ADDRESS_FOR_S11 = "0.0.0.0/24";
SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP = "tun3";
SGW_INTERFACE_MTU_FOR_S1U_S12_S4_UP = 1564
SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP = "192.188.3.3/24";
# TODO PORT NUMBER
SGW_IPV4_PORT_FOR_S1U_S12_S4_UP = 2152;
SGW_INTERFACE_NAME_FOR_S5_S8_UP = "none";
SGW_IPV4_ADDRESS_FOR_S5_S8_UP = "0.0.0.0/24";
};
# Only for tests
SGW_DROP_UPLINK_S1U_TRAFFIC = "no";
# Only for tests
SGW_DROP_DOWNLINK_S1U_TRAFFIC = "no";
};
P-GW =
{
NETWORK_INTERFACES :
{
PGW_INTERFACE_NAME_FOR_S5_S8 = "none";
PGW_IPV4_ADDRESS_FOR_S5_S8 = "0.0.0.0/24";
PGW_INTERFACE_NAME_FOR_SGI = "eth1";
PGW_IPV4_ADDRESS_FOR_SGI = "192.168.13.82/24";
# Option available only if GTPU in kernel configured
PGW_MASQUERADE_SGI = "yes";
};
IP_ADDRESS_POOL :
{
IPV4_LIST = (
"192.168.0.0/24",
"192.168.1.0/24"
);
IPV6_LIST = (
"2014:02:26::0/120"
);
};
DEFAULT_DNS_1_IPV4_ADDRESS = "192.168.12.100";
DEFAULT_DNS_2_IPV4_ADDRESS = "192.168.106.12";
};
HSS =
{
NETWORK_INTERFACES :
{
HSS_INTERFACE_NAME_FOR_S6A = "none";
HSS_IPV4_ADDRESS_FOR_S6A = "192.168.1.1/16";
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment