remove constructor key word

openair1/PHY/INIT/init_top.c

 /*
- * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
- * contributor license agreements.  See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The OpenAirInterface Software Alliance licenses this file to You under
- * the OAI Public License, Version 1.1  (the "License"); you may not use this file
- * except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.openairinterface.org/?page_id=698
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *-------------------------------------------------------------------------------
- * For more information about the OpenAirInterface (OAI) Software Alliance:
- *      contact@openairinterface.org
- */
+   Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+   contributor license agreements.  See the NOTICE file distributed with
+   this work for additional information regarding copyright ownership.
+   The OpenAirInterface Software Alliance licenses this file to You under
+   the OAI Public License, Version 1.1  (the "License"); you may not use this file
+   except in compliance with the License.
+   You may obtain a copy of the License at
+
+        http://www.openairinterface.org/?page_id=698
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.
+  -------------------------------------------------------------------------------
+   For more information about the OpenAirInterface (OAI) Software Alliance:
+        contact@openairinterface.org
+*/
 
 /*!\brief Initilization and reconfiguration routines for LTE PHY */
 #include "phy_init.h"
@@ -27,12 +27,11 @@
 #include "PHY/LTE_REFSIG/lte_refsig.h"
 #include "PHY/LTE_TRANSPORT/transport_common_proto.h"
 
-void generate_64qam_table(void)
-{
+void init_sss(void);
 
+void generate_64qam_table(void) {
   int a,b,c,index;
 
-
   for (a=-1; a<=1; a+=2)
     for (b=-1; b<=1; b+=2)
       for (c=-1; c<=1; c+=2) {
@@ -41,9 +40,7 @@ void generate_64qam_table(void)
       }
 }
 
-void generate_16qam_table(void)
-{
-
+void generate_16qam_table(void) {
   int a,b,index;
 
   for (a=-1; a<=1; a+=2)
@@ -53,54 +50,40 @@ void generate_16qam_table(void)
     }
 }
 
-void generate_qpsk_table(void)
-{
-
+void generate_qpsk_table(void) {
   int a,index;
 
   for (a=-1; a<=1; a+=2) {
     index = (1+a)/2;
-    qpsk_table[index] = -a*QPSK;  
+    qpsk_table[index] = -a*QPSK;
   }
 }
 
-void init_lte_top(LTE_DL_FRAME_PARMS *frame_parms)
-{
-
+void init_lte_top(LTE_DL_FRAME_PARMS *frame_parms) {
   ccodelte_init();
   ccodelte_init_inv();
-
   init_dfts();
-
-
   phy_generate_viterbi_tables_lte();
-
   load_codinglib();
   lte_sync_time_init(frame_parms);
-
   generate_ul_ref_sigs();
   generate_ul_ref_sigs_rx();
-
   generate_64qam_table();
   generate_16qam_table();
   generate_qpsk_table();
   generate_RIV_tables();
-
   init_unscrambling_lut();
   init_scrambling_lut();
   //set_taus_seed(1328);
-
-
+  init_sss();
 }
 
-void free_lte_top(void)
-{
+void free_lte_top(void) {
   free_codinglib();
   lte_sync_time_free();
-
   /* free_ul_ref_sigs() is called in phy_free_lte_eNB() */
 }
 
 
 /*
- * @}*/
+   @}*/

openair1/PHY/LTE_TRANSPORT/sss_gen.c

@@ -9,19 +9,19 @@ int16_t *d0_sss;
 int16_t *d5_sss;
 
 #define MyAssert(x) { if(!(x)) { printf("Error in table intialization: %s:%d\n",__FILE__,__LINE__); exit(1);}}
-#define gen(table, formula) {			\
-    int x[31]= {0};				\
-    x[4]=1;					\
-    for(int i=0; i<26; i++)			\
-      x[i+5]=formula;				\
-    for (int i=0; i<31; i++)			\
-      table[i]=1-2*x[i];			\
-}
+#define gen(table, formula) {     \
+    int x[31]= {0};       \
+    x[4]=1;         \
+    for(int i=0; i<26; i++)     \
+      x[i+5]=formula;       \
+    for (int i=0; i<31; i++)      \
+      table[i]=1-2*x[i];      \
+  }
 
 #define mod31(a) (a)%31
 #define mod2(a)  (a)%2
 #define mod8(a)  (a)%8
-__attribute__((constructor)) static void init_sss(void) {
+void init_sss(void) {
   MyAssert(0==posix_memalign((void **)&d0_sss, 16,504*31*2*sizeof(*d0_sss)));
   MyAssert(0==posix_memalign((void **)&d5_sss, 16,504*31*2*sizeof(*d5_sss)));
   int s[31];
@@ -39,11 +39,12 @@ __attribute__((constructor)) static void init_sss(void) {
       int m0 = mprime%31;
       int m1 = (m0+mprime/31+1)%31;
       int rowIndex=(Nid2+3*Nid1)*31*2;
+
       for (int i=0; i<31; i++) {
         d0_sss[rowIndex+i*2]=   s[mod31(i+m0)] * c[mod31(i+Nid2)];
         d5_sss[rowIndex+i*2]=   s[mod31(i+m1)] * c[mod31(i+Nid2)];
         d0_sss[rowIndex+i*2+1]= s[mod31(i+m1)] * c[mod31(i+Nid2+3)] * z[mod31(i+mod8(m0))];
-	d5_sss[rowIndex+i*2+1]= s[mod31(i+m0)] * c[mod31(i+Nid2+3)] * z[mod31(i+mod8(m1))];
+        d5_sss[rowIndex+i*2+1]= s[mod31(i+m0)] * c[mod31(i+Nid2+3)] * z[mod31(i+mod8(m1))];
       }
     }
   }
@@ -52,7 +53,7 @@ __attribute__((constructor)) static void init_sss(void) {
 #ifdef SSS_TABLES_TEST
 void main () {
   printf("int16_t d0_sss[504*62] = {");
-  
+
   for (int i=0; i<504*62; i++)
     printf("%d,\n",d0_sss[i]);
 
@@ -63,6 +64,5 @@ void main () {
     printf("%d,\n",d5_sss[i]);
 
   printf("};\n\n");
-  
 }
 #endif