Commit 61a6b061 authored by Xiwen JIANG's avatar Xiwen JIANG

distinguish beamforming mode in rx_pdsch for SI, RA and data

parent 2e2f6f9c
......@@ -100,7 +100,7 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
int avgs, rb;
LTE_DL_UE_HARQ_t *dlsch0_harq,*dlsch1_harq = 0;
uint8_t beamforming_mode = phy_vars_ue->transmission_mode[eNB_id]<7?0:phy_vars_ue->transmission_mode[eNB_id];
uint8_t beamforming_mode;
uint32_t *rballoc;
switch (type) {
......@@ -108,12 +108,14 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
lte_ue_pdsch_vars = &phy_vars_ue->lte_ue_pdsch_vars_SI[eNB_id];
dlsch_ue = &phy_vars_ue->dlsch_ue_SI[eNB_id];
dlsch0_harq = dlsch_ue[0]->harq_processes[harq_pid];
beamforming_mode = 0;
break;
case RA_PDSCH:
lte_ue_pdsch_vars = &phy_vars_ue->lte_ue_pdsch_vars_ra[eNB_id];
dlsch_ue = &phy_vars_ue->dlsch_ue_ra[eNB_id];
dlsch0_harq = dlsch_ue[0]->harq_processes[harq_pid];
beamforming_mode = 0;
break;
case PDSCH:
......@@ -121,6 +123,7 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
dlsch_ue = phy_vars_ue->dlsch_ue[eNB_id];
dlsch0_harq = dlsch_ue[0]->harq_processes[harq_pid];
dlsch1_harq = dlsch_ue[1]->harq_processes[harq_pid];
beamforming_mode = phy_vars_ue->transmission_mode[eNB_id]<7?0:phy_vars_ue->transmission_mode[eNB_id];
break;
default:
......@@ -204,7 +207,7 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
phy_vars_ue->high_speed_flag,
frame_parms);
}
} else if (beamforming_mode==0) {// if n_tx>1
} else if (beamforming_mode==0) { //else if nb_antennas_ports_eNB==1 && beamforming_mode == 0
nb_rb = dlsch_extract_rbs_single(lte_ue_common_vars->rxdataF,
lte_ue_common_vars->dl_ch_estimates[eNB_id],
lte_ue_pdsch_vars[eNB_id]->rxdataF_ext,
......@@ -243,7 +246,7 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
phy_vars_ue->high_speed_flag,
frame_parms);
}
} else if (beamforming_mode==7) { //else n_tx>1
} else if (beamforming_mode==7) { //else if beamforming_mode == 7
nb_rb = dlsch_extract_rbs_TM7(lte_ue_common_vars->rxdataF,
lte_ue_pdsch_vars[eNB_id]->dl_bf_ch_estimates,
lte_ue_pdsch_vars[eNB_id]->rxdataF_ext,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment