updating my config files

targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp

@@ -632,7 +632,7 @@ extern "C" {
     
     // do not explicitly set the clock to "internal", because this will disable the gpsdo
     //    // lock mboard clocks
-    //    s->usrp->set_clock_source("internal");
+    s->usrp->set_clock_source("external");
     // set master clock rate and sample rate for tx & rx for streaming
 
     device->type = USRP_B200_DEV;

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.exmimo2.conf

@@ -17,7 +17,7 @@ eNBs =
 
     mobile_country_code =  "208";
 
-    mobile_network_code =  "93";
+    mobile_network_code =  "94";
 
        ////////// Physical parameters:
 
@@ -40,7 +40,7 @@ eNBs =
         nb_antennas_rx          			      = 1;
 	nb_antenna_ports				      = 1;
         tx_gain                                            = 10; //25;
-        rx_gain                                            = 10; //20;
+        rx_gain                                            = 120; //20;
         prach_root              			      = 0;
         prach_config_index      			      = 0;
         prach_high_speed        			      = "DISABLE";
@@ -50,7 +50,7 @@ eNBs =
         pucch_nRB_CQI           			      = 1;
         pucch_nCS_AN            			      = 0;
         pucch_n1_AN             			      = 32;
-        pdsch_referenceSignalPower 			      = -26;
+        pdsch_referenceSignalPower 			      = -32;
         pdsch_p_b                  			      = 0;
         pusch_n_SB                 			      = 1;
         pusch_enable64QAM          			      = "DISABLE";
@@ -147,10 +147,10 @@ eNBs =
     NETWORK_INTERFACES :
     {
       ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-      ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.212/24";
+      ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.146/24";
 
       ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-      ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.212/24";
+      ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.146/24";
       ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
     };
 

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf

@@ -148,9 +148,9 @@ eNBs =
     {
 
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth1";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.147/24";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.146/24";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth1";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.147/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.146/24";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
     };