Skip to content

O
OpenXG-RAN
Commit d0f0e5e7 authored by gauthier's avatar gauthier
Browse files
Options

Merge branch 'develop' into bugfix-33-RRCConnectionRequest_with_STMSI

parents c383e50b 1d390bd4
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 8402 additions and 949 deletions
cmake_targets/CMakeLists.txt
View file @ d0f0e5e7
......@@ -133,9 +133,6 @@ else (CMAKE_SYSTEM_PROCESSOR STREQUAL "armv7l")
if (CPUINFO MATCHES "avx2")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -mavx2")
endif()
if (CPUINFO MATCHES "sse4_2")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -msse4.2")
endif()
if (CPUINFO MATCHES "sse4_1")
set(C_FLAGS_PROCESSOR "${C_FLAGS_PROCESSOR} -msse4.1")
endif()
......@@ -149,8 +146,8 @@ set(C_FLAGS_PROCESSOR " ${C_FLAGS_PROCESSOR} ${CFLAGS_PROCESSOR_USER}")
Message("C_FLAGS_PROCESSOR is ${C_FLAGS_PROCESSOR}")
if (CMAKE_SYSTEM_PROCESSOR MATCHES "x86")
if ( (NOT( C_FLAGS_PROCESSOR MATCHES "ssse3")) OR (NOT( C_FLAGS_PROCESSOR MATCHES "msse4.1")) OR (NOT( C_FLAGS_PROCESSOR MATCHES "msse4.2")) )
Message(FATAL_ERROR "For x86 Architecture, you must have following flags: -mssse3 -msse4.1 -msse4.2. The current detected flags are: ${C_FLAGS_PROCESSOR}. You can pass the flags manually in build script, for example: ./build_oai --cflags_processor \"-mssse3 -msse4.1 -msse4.2\" ")
if ( (NOT( C_FLAGS_PROCESSOR MATCHES "ssse3")) OR (NOT( C_FLAGS_PROCESSOR MATCHES "msse4.1")) )
Message(FATAL_ERROR "For x86 Architecture, you must have following flags: -mssse3 -msse4.1. The current detected flags are: ${C_FLAGS_PROCESSOR}. You can pass the flags manually in build script, for example: ./build_oai --cflags_processor \"-mssse3 -msse4.1\" ")
endif()
endif()
......@@ -462,6 +459,7 @@ add_boolean_option(ENABLE_SECURITY True "Enable LTE integrity and ciphe
add_boolean_option(ENABLE_USE_MME True "eNB connected to MME (INTERFACE S1-C), not standalone eNB")
add_boolean_option(NO_RRM True "DO WE HAVE A RADIO RESSOURCE MANAGER: NO")
add_boolean_option(USER_MODE True "????")
add_boolean_option(RRC_DEFAULT_RAB_IS_AM False "set the RLC mode to AM for the default bearer")
add_boolean_option(OAI_NW_DRIVER_TYPE_ETHERNET False "????")
add_boolean_option(DISABLE_USE_NAS False "???")
......@@ -1649,7 +1647,7 @@ foreach(myExe s1ap
${OPENAIR3_DIR}/TEST/test_${myExe}.c
)
target_link_libraries (test_${myExe}
-Wl,--start-group SECU_CN UTIL LFDS -Wl,--end-group m rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES} fdproto fdcore
-Wl,--start-group SECU_CN UTIL LFDS -Wl,--end-group m rt crypt ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
)
endforeach(myExe)
......
cmake_targets/autotests/010113/CMakeLists.txt deleted 100644 → 0
View file @ c383e50b
cmake_minimum_required(VERSION 2.8)
set(OAI_NW_DRIVER_TYPE_ETHERNET True)
set(OAI_NW_DRIVER_USE_NETLINK True)
set(NAS_NETLINK True)
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/010114/CMakeLists.txt deleted 100644 → 0
View file @ c383e50b
cmake_minimum_required(VERSION 2.8)
set(ADDR_CONF False)
set(DEBUG_OMG False)
set(DISABLE_XER_PRINT False)
set(DRIVER2013 False)
set(ENABLE_FXP True)
set(ENABLE_ITTI True)
set(ENABLE_NAS_UE_LOGGING False)
set(ENABLE_NEW_MULTICAST True)
set(ENABLE_PGM_TRANSPORT True)
set(ENABLE_RAL False)
set(ENABLE_SECURITY False)
set(ENABLE_USE_CPU_EXECUTION_TIME True)
set(ENABLE_USE_MME False)
set(ENABLE_VCD_FIFO True)
set(HARD_RT False)
set(JUMBO_FRAME True)
set(LARGE_SCALE False)
set(LINK_ENB_PDCP_TO_GTPV1U False)
set(LINUX_LIST False)
set(LINUX True)
set(LOCALIZATION False)
set(LOG_NO_THREAD True)
set(LOWLATENCY False)
set(MAC_CONTEXT 1)
set(MAX_NUM_CCs 1)
set(MIH_C_MEDIEVAL_EXTENSIONS False)
set(MSG_PRINT False)
set(MU_RECEIVER False)
set(NAS_ADDRESS_FIX true)
set(NAS_NETLINK True)
set(NAS_UE True)
set(NEW_FFT True)
set(NO_RRM True)
set(OAI_EMU True)
set(OAI_EMU True)
set(OAI_NW_DRIVER_TYPE_ETHERNET True)
set(OPENAIR1 False)
set(OPENAIR2 True)
set(OPENAIR_EMU True)
set(OPENAIR_LTE True)
set (PACKAGE_NAME "oaisim")
set(PACKAGE_NAME "oaisim")
set(PBS_SIM False)
set(PC_DSP False)
set(PC_TARGET False)
set(PDCP_MSG_PRINT False)
set(PERFECT_CE False)
set(PHY_ABSTRACTION True)
set(PHY_ABSTRACTION True)
set(PHY_EMUL False)
set(PHYSIM False)
set(PUCCH True)
set(RANDOM_BF False)
set(RF_BOARD "NoBoard")
set(RLC_STOP_ON_LOST_PDU True)
set(RRC_ASN1_VERSION Rel8)
set(RRC_ASN1_VERSION "Rel8")
set(RRC_MSG_PRINT False)
set(RTAI False)
set(SECU False)
set(SMBV False)
set(SPECTRA False)
set(TEST_OMG False)
set(USE_3GPP_ADDR_AS_LINK_ADDR False)
set(USE_MME False)
set(USER_MODE True)
set(XER_PRINT False)
set(XFORMS False)
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/010115/CMakeLists.txt deleted 100644 → 0
View file @ c383e50b
cmake_minimum_required(VERSION 2.8)
set ( ADDR_CONF False )
set ( DEBUG_OMG False )
set ( DISABLE_USE_NAS False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 False )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False )
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_MME False )
set ( ENABLE_VCD_FIFO True )
set ( ENB_MODE True )
set ( EPC_BUILD False )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False )
set ( LINK_ENB_PDCP_TO_IP_DRIVER False )
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD True )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False )
set ( MESSAGE_CHART_GENERATOR_RLC_MAC False )
set ( MESSAGE_CHART_GENERATOR_PHY False )
set ( MIH_C_MEDIEVAL_EXTENSIONS False )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX False )
set ( NAS_BUILT_IN_EPC False )
set ( NAS_BUILT_IN_UE False )
set ( NAS_MME False )
set ( NAS_NETLINK False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX 2 )
set ( NB_ANTENNAS_TX 2 )
set ( NB_ANTENNAS_TXRX 2 )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET True )
set ( OAI_NW_DRIVER_USE_NETLINK False )
set ( OAISIM True )
set ( OPENAIR1 False )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PBS_SIM False )
set ( PC_DSP False )
set ( PC_TARGET False )
set ( PDCP_MSG_PRINT False )
set ( PDCP_USE_NETLINK_QUEUES False )
set ( PDCP_USE_NETLINK True )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT 1 )
set ( PHY_EMUL False )
set ( PHYSIM False )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD False )
set ( RLC_STOP_ON_LOST_PDU True )
set ( RRC_ASN1_VERSION Rel10 )
set ( RRC_DEFAULT_RAB_IS_AM False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( S1AP_LIMIT_STREAM_ID_TO_1 False )
set ( S1AP_VERSION R10 )
set ( SMBV False )
set ( SPECTRA False )
set ( STOP_ON_IP_TRAFFIC_OVERLOAD False )
set ( TEST_OMG False )
set ( TRACE_RLC_AM_BO False )
set ( TRACE_RLC_AM_FREE_SDU False )
set ( TRACE_RLC_AM_HOLE False )
set ( TRACE_RLC_AM_PDU True )
set ( TRACE_RLC_AM_RESEGMENT False )
set ( TRACE_RLC_AM_RX_DECODE False )
set ( TRACE_RLC_AM_RX False )
set ( TRACE_RLC_AM_STATUS_CREATION False )
set ( TRACE_RLC_AM_TX False )
set ( TRACE_RLC_AM_TX_STATUS False )
set ( TRACE_RLC_PAYLOAD False )
set ( TRACE_RLC_UM_DAR False )
set ( TRACE_RLC_UM_DISPLAY_ASCII_DATA False )
set ( TRACE_RLC_UM_PDU True )
set ( TRACE_RLC_UM_RX False )
set ( TRACE_RLC_UM_SEGMENT False )
set ( TRACE_RLC_UM_TX_STATUS False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME False )
set ( USER_MODE True )
set ( XER_PRINT False )
set ( XFORMS False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/010204/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
set ( ADDR_CONF False )
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 True )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False)
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False)
set ( ENABLE_VCD_FIFO False )
set ( ENB_MODE True )
set ( EXMIMO_IOT True )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False)
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD 1 )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False )
set ( MESSAGE_CHART_GENERATOR_RLC_MAC False )
set ( MESSAGE_CHART_GENERATOR_PHY False )
set ( MIH_C_MEDIEVAL_EXTENSIONS False )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX True )
set ( NAS_BUILT_IN_UE False)
set ( NAS_MME False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX "2" )
set ( NB_ANTENNAS_TX "2" )
set ( NB_ANTENNAS_TXRX "2" )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU True )
set ( OAISIM True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET True )
set ( OAI_NW_DRIVER_USE_NETLINK True )
set ( OPENAIR1 True )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PACKAGE_NAME "oaisim" )
set ( PBS_SIM False )
set ( PDCP_USE_NETLINK True )
set ( PC_DSP True )
set ( PC_TARGET True )
set ( PDCP_MSG_PRINT False )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT False )
set ( PHY_EMUL False )
set ( PHYSIM True )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD "False" )
set ( RRC_ASN1_VERSION "Rel10" )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( SECU False )
set ( SMBV False )
set ( SPECTRA False )
set ( TEST_OMG False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME "R10" )
set ( USER_MODE True )
set ( XER_PRINT False )
set ( XFORMS False )
set ( PRINT_STATS False )
set ( RRC_ASN1_VERSION "Rel10")
set ( ENABLE_VCD_FIFO False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/010205/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
set ( ADDR_CONF False )
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 True )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False)
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False)
set ( ENABLE_VCD_FIFO False )
set ( ENB_MODE True )
set ( EXMIMO_IOT True )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False)
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD 1 )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False )
set ( MESSAGE_CHART_GENERATOR_RLC_MAC False )
set ( MESSAGE_CHART_GENERATOR_PHY False )
set ( MIH_C_MEDIEVAL_EXTENSIONS False )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX True )
set ( NAS_BUILT_IN_UE False)
set ( NAS_MME False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX "2" )
set ( NB_ANTENNAS_TX "2" )
set ( NB_ANTENNAS_TXRX "2" )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU True )
set ( OAISIM True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET True )
set ( OAI_NW_DRIVER_USE_NETLINK True )
set ( OPENAIR1 True )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PACKAGE_NAME "oaisim" )
set ( PBS_SIM False )
set ( PDCP_USE_NETLINK True )
set ( PC_DSP True )
set ( PC_TARGET True )
set ( PDCP_MSG_PRINT False )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT False )
set ( PHY_EMUL False )
set ( PHYSIM True )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD "False" )
set ( RRC_ASN1_VERSION "Rel10" )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( SECU False )
set ( SMBV False )
set ( SPECTRA False )
set ( TEST_OMG False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME "R10" )
set ( USER_MODE True )
set ( XER_PRINT False )
set ( XFORMS False )
set ( PRINT_STATS False )
set ( RRC_ASN1_VERSION "Rel10")
set ( ENABLE_VCD_FIFO False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/010400/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
set ( ADDR_CONF False )
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 True )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False)
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False)
set ( ENABLE_VCD_FIFO False )
set ( ENB_MODE True )
set ( EXMIMO_IOT True )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False)
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD 1 )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False )
set ( MESSAGE_CHART_GENERATOR_RLC_MAC False )
set ( MESSAGE_CHART_GENERATOR_PHY False )
set ( MIH_C_MEDIEVAL_EXTENSIONS False )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX True )
set ( NAS_BUILT_IN_UE False)
set ( NAS_MME False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX "2" )
set ( NB_ANTENNAS_TX "2" )
set ( NB_ANTENNAS_TXRX "2" )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU True )
set ( OAISIM True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET True )
set ( OAI_NW_DRIVER_USE_NETLINK True )
set ( OPENAIR1 True )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PACKAGE_NAME "oaisim" )
set ( PBS_SIM False )
set ( PDCP_USE_NETLINK True )
set ( PC_DSP True )
set ( PC_TARGET True )
set ( PDCP_MSG_PRINT False )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT False )
set ( PHY_EMUL False )
set ( PHYSIM True )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD "False" )
set ( RRC_ASN1_VERSION "Rel10" )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( SECU False )
set ( SMBV False )
set ( SPECTRA False )
set ( TEST_OMG False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME "R10" )
set ( USER_MODE True )
set ( XER_PRINT False )
set ( XFORMS False )
set ( PRINT_STATS False )
set ( RRC_ASN1_VERSION "Rel10")
set ( ENABLE_VCD_FIFO False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/010401/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
set ( ADDR_CONF False )
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 True )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False)
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False)
set ( ENABLE_VCD_FIFO False )
set ( ENB_MODE True )
set ( EXMIMO_IOT True )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False)
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD 1 )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False )
set ( MESSAGE_CHART_GENERATOR_RLC_MAC False )
set ( MESSAGE_CHART_GENERATOR_PHY False )
set ( MIH_C_MEDIEVAL_EXTENSIONS False )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX True )
set ( NAS_BUILT_IN_UE False)
set ( NAS_MME False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX "2" )
set ( NB_ANTENNAS_TX "2" )
set ( NB_ANTENNAS_TXRX "2" )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU True )
set ( OAISIM True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET True )
set ( OAI_NW_DRIVER_USE_NETLINK True )
set ( OPENAIR1 True )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PACKAGE_NAME "oaisim" )
set ( PBS_SIM False )
set ( PDCP_USE_NETLINK True )
set ( PC_DSP True )
set ( PC_TARGET True )
set ( PDCP_MSG_PRINT False )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT False )
set ( PHY_EMUL False )
set ( PHYSIM True )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD "False" )
set ( RRC_ASN1_VERSION "Rel10" )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( SECU False )
set ( SMBV False )
set ( SPECTRA False )
set ( TEST_OMG False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME "R10" )
set ( USER_MODE True )
set ( XER_PRINT False )
set ( XFORMS False )
set ( PRINT_STATS False )
set ( RRC_ASN1_VERSION "Rel10")
set ( ENABLE_VCD_FIFO False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/010402/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
set ( ADDR_CONF False )
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 True )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False)
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False)
set ( ENABLE_VCD_FIFO False )
set ( ENB_MODE True )
set ( EXMIMO_IOT True )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False)
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD 1 )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False )
set ( MESSAGE_CHART_GENERATOR_RLC_MAC False )
set ( MESSAGE_CHART_GENERATOR_PHY False )
set ( MIH_C_MEDIEVAL_EXTENSIONS False )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX True )
set ( NAS_BUILT_IN_UE False)
set ( NAS_MME False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX "2" )
set ( NB_ANTENNAS_TX "2" )
set ( NB_ANTENNAS_TXRX "2" )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU True )
set ( OAISIM True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET True )
set ( OAI_NW_DRIVER_USE_NETLINK True )
set ( OPENAIR1 True )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PACKAGE_NAME "oaisim" )
set ( PBS_SIM False )
set ( PDCP_USE_NETLINK True )
set ( PC_DSP True )
set ( PC_TARGET True )
set ( PDCP_MSG_PRINT False )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT False )
set ( PHY_EMUL False )
set ( PHYSIM True )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD "False" )
set ( RRC_ASN1_VERSION "Rel10" )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( SECU False )
set ( SMBV False )
set ( SPECTRA False )
set ( TEST_OMG False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME "R10" )
set ( USER_MODE True )
set ( XER_PRINT False )
set ( XFORMS False )
set ( PRINT_STATS False )
set ( RRC_ASN1_VERSION "Rel10")
set ( ENABLE_VCD_FIFO False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/010403/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
set ( ADDR_CONF False )
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 True )
set ( EMOS False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_PGM_TRANSPORT True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False)
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False)
set ( ENABLE_VCD_FIFO False )
set ( ENB_MODE True )
set ( EXMIMO_IOT True )
set ( HARD_RT False )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False)
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD 1 )
set ( LOWLATENCY False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False )
set ( MESSAGE_CHART_GENERATOR_RLC_MAC False )
set ( MESSAGE_CHART_GENERATOR_PHY False )
set ( MIH_C_MEDIEVAL_EXTENSIONS False )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX True )
set ( NAS_BUILT_IN_UE False)
set ( NAS_MME False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX "2" )
set ( NB_ANTENNAS_TX "2" )
set ( NB_ANTENNAS_TXRX "2" )
set ( NEW_FFT True )
set ( NO_RRM True )
set ( OAI_EMU True )
set ( OAISIM True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET True )
set ( OAI_NW_DRIVER_USE_NETLINK True )
set ( OPENAIR1 True )
set ( OPENAIR2 True )
set ( OPENAIR_EMU False )
set ( OPENAIR_LTE True )
set ( PACKAGE_NAME "oaisim" )
set ( PBS_SIM False )
set ( PDCP_USE_NETLINK True )
set ( PC_DSP True )
set ( PC_TARGET True )
set ( PDCP_MSG_PRINT False )
set ( PERFECT_CE False )
set ( PHY_ABSTRACTION True )
set ( PHY_CONTEXT False )
set ( PHY_EMUL False )
set ( PHYSIM True )
set ( PUCCH True )
set ( RANDOM_BF False )
set ( RF_BOARD "False" )
set ( RRC_ASN1_VERSION "Rel10" )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_MSG_PRINT False )
set ( RTAI False )
set ( SECU False )
set ( SMBV False )
set ( SPECTRA False )
set ( TEST_OMG False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME "R10" )
set ( USER_MODE True )
set ( XER_PRINT False )
set ( XFORMS False )
set ( PRINT_STATS False )
set ( RRC_ASN1_VERSION "Rel10")
set ( ENABLE_VCD_FIFO False )
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/010309/CMakeLists.txt → cmake_targets/autotests/015000/CMakeLists.txt
View file @ d0f0e5e7
......@@ -5,7 +5,7 @@ set(RF_BOARD None)
set(XFORMS False)
set(DEBUG_PHY False)
set(MU_RECIEVER Flase)
set(MU_RECIEVER False)
set(RANDOM_BF False)
set(PBS_SIM False)
set(PERFECT_CE False)
......
cmake_targets/autotests/010307/CMakeLists.txt → cmake_targets/autotests/015001/CMakeLists.txt
View file @ d0f0e5e7
......@@ -5,7 +5,7 @@ set(RF_BOARD None)
set(XFORMS False)
set(DEBUG_PHY False)
set(MU_RECIEVER Flase)
set(MU_RECIEVER False)
set(RANDOM_BF False)
set(PBS_SIM False)
set(PERFECT_CE False)
......
cmake_targets/autotests/010308/CMakeLists.txt → cmake_targets/autotests/015002/CMakeLists.txt
View file @ d0f0e5e7
......@@ -5,7 +5,7 @@ set(RF_BOARD None)
set(XFORMS False)
set(DEBUG_PHY False)
set(MU_RECIEVER Flase)
set(MU_RECIEVER False)
set(RANDOM_BF False)
set(PBS_SIM False)
set(PERFECT_CE False)
......
cmake_targets/autotests/010306/CMakeLists.txt → cmake_targets/autotests/015003/CMakeLists.txt
View file @ d0f0e5e7
......@@ -5,7 +5,7 @@ set(RF_BOARD None)
set(XFORMS False)
set(DEBUG_PHY False)
set(MU_RECIEVER Flase)
set(MU_RECIEVER False)
set(RANDOM_BF False)
set(PBS_SIM False)
set(PERFECT_CE False)
......
cmake_targets/autotests/015004/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "unitary_tests_simulators")
set(PHYSIM True)
set(RF_BOARD None)
set(XFORMS False)
set(DEBUG_PHY False)
set(MU_RECIEVER False)
set(RANDOM_BF False)
set(PBS_SIM False)
set(PERFECT_CE False)
set(NAS_UE False)
set(MESSAGE_CHART_GENERATOR False)
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/015005/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "unitary_tests_simulators")
set(PHYSIM True)
set(RF_BOARD None)
set(XFORMS False)
set(DEBUG_PHY False)
set(MU_RECIEVER False)
set(RANDOM_BF False)
set(PBS_SIM False)
set(PERFECT_CE False)
set(NAS_UE False)
set(MESSAGE_CHART_GENERATOR False)
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/015006/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "unitary_tests_simulators")
set(PHYSIM True)
set(RF_BOARD None)
set(XFORMS False)
set(DEBUG_PHY False)
set(MU_RECIEVER False)
set(RANDOM_BF False)
set(PBS_SIM False)
set(PERFECT_CE False)
set(NAS_UE False)
set(MESSAGE_CHART_GENERATOR False)
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/015007/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "unitary_tests_simulators")
set(PHYSIM True)
set(RF_BOARD None)
set(XFORMS False)
set(DEBUG_PHY False)
set(MU_RECIEVER False)
set(RANDOM_BF False)
set(PBS_SIM False)
set(PERFECT_CE False)
set(NAS_UE False)
set(MESSAGE_CHART_GENERATOR False)
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/015008/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "unitary_tests_simulators")
set(PHYSIM True)
set(RF_BOARD None)
set(XFORMS False)
set(DEBUG_PHY False)
set(MU_RECIEVER False)
set(RANDOM_BF False)
set(PBS_SIM False)
set(PERFECT_CE False)
set(NAS_UE False)
set(MESSAGE_CHART_GENERATOR False)
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/015009/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "unitary_tests_simulators")
set(PHYSIM True)
set(RF_BOARD None)
set(XFORMS False)
set(DEBUG_PHY False)
set(MU_RECIEVER False)
set(RANDOM_BF False)
set(PBS_SIM False)
set(PERFECT_CE False)
set(NAS_UE False)
set(MESSAGE_CHART_GENERATOR False)
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/015100/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "unitary_tests_simulators")
set(PHYSIM True)
set(RF_BOARD None)
set(XFORMS False)
set(DEBUG_PHY False)
set(MU_RECIEVER False)
set(RANDOM_BF False)
set(PBS_SIM False)
set(PERFECT_CE False)
set(NAS_UE False)
set(MESSAGE_CHART_GENERATOR False)
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/015101/CMakeLists.txt 0 → 100644
View file @ d0f0e5e7
cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "unitary_tests_simulators")
set(PHYSIM True)
set(RF_BOARD None)
set(XFORMS False)
set(DEBUG_PHY False)
set(MU_RECIEVER False)
set(RANDOM_BF False)
set(PBS_SIM False)
set(PERFECT_CE False)
set(NAS_UE False)
set(MESSAGE_CHART_GENERATOR False)
include(${CMAKE_CURRENT_SOURCE_DIR}/../../CMakeLists.txt)
cmake_targets/autotests/README.txt
View file @ d0f0e5e7
This diff is collapsed.
cmake_targets/autotests/core.py 0 → 100644
View file @ d0f0e5e7
This diff is collapsed.
cmake_targets/autotests/log.py 0 → 100644
View file @ d0f0e5e7
#******************************************************************************
# Eurecom OpenAirInterface
# Copyright(c) 1999 - 2013 Eurecom
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
# version 2, as published by the Free Software Foundation.
# This program is distributed in the hope it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
# You should have received a copy of the GNU General Public License along with
# this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
# The full GNU General Public License is included in this distribution in
# the file called "COPYING".
# Contact Information
# Openair Admin: openair_admin@eurecom.fr
# Openair Tech : openair_tech@eurecom.fr
# Forums : http://forums.eurecom.fsr/openairinterface
# Address : Eurecom, Compus SophiaTech 450, route des chappes, 06451 Biot, France
#*****************************************************************************
# \file log.py
# \brief provides primitives and defines how the logs and statistics are generated
# \author Navid Nikaein
# \date 2013
# \version 0.1
# @ingroup _test
import sys
import re
import time
import datetime
import array
import xml.etree.ElementTree as ET
debug = False
docfile = ''
start_time = time.time()
testcase_starttime = start_time
debug = 0
stats = {'passed':0, 'failed':0, 'skipped':0, 'internal_errors':0, 'cmd':0}
# xml result (jUnit like)
xUnitTestsuites = ET.Element( 'testsuites' )
xUnitTestsuite = ET.SubElement( xUnitTestsuites, 'testsuite' )
xUnitTestsuite.set( 'name', 'OAI' )
xUnitTestsuite.set( 'timestamp', datetime.datetime.fromtimestamp(start_time).strftime('%Y-%m-%dT%H:%M:%S') )
xUnitTestsuite.set( 'hostname', 'localhost' )
#xUnitSystemOut = ET.SubElement( xUnitTestsuite, 'system-out' )
class bcolors:
header = '\033[95m'
okblue = '\033[94m'
okgreen = '\033[92m'
warning = '\033[93m'
fail = '\033[91m'
normal = '\033[0m'
def __init__(self):
if not sys.stdout.isatty():
self.disable()
def disable(self):
self.header = ''
self.okblue = ''
self.okgreen = ''
self.warning = ''
self.fail = ''
self.normal = ''
class err(Exception):
def __init__(self, value):
self.value = value
def __str__(self):
return repr(self.value)
def writefile(logfile, message):
F_testlog = open(logfile, 'a')
F_testlog.write(message + '\n')
F_testlog.close()
def sleep(seconds):
time.sleep(seconds)
def start():
"""Start the timer for the following testcase."""
global testcase_starttime
testcase_starttime = time.time()
def set_debug_level(level):
debug = level
def statistics(logfile):
global start_time
#if stats['passed'] == 0:
# print "no test executed...exiting"
# sys.exit()
total_tests = stats['passed'] + stats['failed'] + stats['skipped']
total_ex_tests = stats['passed'] + stats['failed']
elapsed_time = time.gmtime(time.time() - start_time)
print '\n'
log_record('info', '===============================================')
log_record('info', 'Total tests performed ' + repr(total_tests))
log_record('info', 'Tests passed ' + repr(stats['passed']))
log_record('info', 'Tests failed ' + repr(stats['failed']))
log_record('info', 'Tests skipped ' + repr(stats['skipped']))
log_record('info', '')
log_record('info', 'Total commands sent ' + repr(stats['cmd']))
log_record('info', 'Total elapsed time (h:m:s) ' + time.strftime('%H:%M:%S', elapsed_time))
log_record('info', '===============================================')
log_record('info', 'Testing pass rate ' + repr((stats['passed'] * 100) / total_tests) + '%')
log_record('info', '===============================================')
writefile(logfile, '\n=====================Results===================')
writefile(logfile, 'Total tests performed ' + repr(total_tests))
writefile(logfile, 'Tests passed ' + repr(stats['passed']))
writefile(logfile, 'Tests failed ' + repr(stats['failed']))
writefile(logfile, 'Tests skipped ' + repr(stats['skipped']))
writefile(logfile, '')
writefile(logfile, 'Total commands sent ' + repr(stats['cmd']))
writefile(logfile, 'Total elapsed time (h:m:s) ' + time.strftime('%H:%M:%S', elapsed_time))
writefile(logfile, '===============================================')
writefile(logfile, 'Testing pass rate ' + repr((stats['passed'] * 100) / total_tests) + '%')
writefile(logfile, '===============================================\n')
xUnitTestsuite.set( 'tests', repr(total_tests) )
xUnitTestsuite.set( 'failures', repr(stats['failed']) )
xUnitTestsuite.set( 'skipped', repr(stats['skipped']) )
xUnitTestsuite.set( 'errors', '0' )
time_delta = datetime.datetime.now() - datetime.datetime.fromtimestamp(start_time)
xUnitTestsuite.set( 'time', repr(time_delta.total_seconds()) )
writefile( logfile + '.xml', ET.tostring( xUnitTestsuites, encoding="utf-8", method="xml" ) )
def log_record(level, message):
ts = time.strftime('%d %b %Y %H:%M')
message = ts + ' [' + level + '] ' + message
if level == 'passed' :
print bcolors.okgreen + message + bcolors.normal
elif level == 'failed' :
print bcolors.fail + message + bcolors.normal
elif level == 'skipped' :
print bcolors.warning + message + bcolors.normal
else :
print message
def fail(case, testnum, testname, conf, message, diag, output,trace):
# report(case, testnum, testname, conf, 'failed', output, diag, message)
report(case, testnum, testname, conf, 'failed', output, diag)
log_record('failed', case + testnum + ' : ' + testname + ' ('+ conf+')')
if message :
log_record('failed', "Output follows:\n" + message )
if trace :
log_record('failed', "trace file can be found in " + trace + "\n" )
stats['failed'] += 1
def failquiet(case, testnum, testname, conf):
log_record('failed', case + testnum + ' :' + testname + ' ('+ conf+')')
stats['failed'] += 1
def ok(case, testnum, testname, conf, message, output):
report(case, testnum, testname, conf, 'passed', output)
log_record('passed', case + testnum + ' : ' + testname + ' ('+ conf+')')
if message :
print bcolors.okgreen + message + bcolors.normal
stats['passed'] += 1
def skip(case, testnum, testname, conf, message=None, diag=None, output=None):
log_record('skipped', case + testnum + ' :' + testname + ' ('+ conf+')')
report(case, testnum, testname, conf, 'skipped', output, diag)
if message :
log_record('skipped', "Output follows:\n" + message )
if diag :
log_record('skipped', "Diagnostic: \n" + diag )
stats['skipped'] += 1
def report(case, test, name, conf, status, output, diag=None, desc=None):
writefile (output, '[' +status+ '] ' + case + test + ' : ' + name + ' ('+ conf+')')
if diag :
writefile (output, '-------> ' + diag)
if desc:
writefile(output, desc)
#log_record('report', + case + test + ' documented')
e = ET.SubElement( xUnitTestsuite, 'testcase' )
e.set( 'name', case + '_' + test + '_' + name )
e.set( 'classname', 'shellscript' )
e.set( 'time', repr( time.time() - testcase_starttime ) )
if status == 'failed':
e = ET.SubElement( e, 'failure' )
e.set( 'message', 'failed' )
e.text = diag
if status == 'skipped':
e = ET.SubElement( e, 'skipped' )
cmake_targets/autotests/openair.py 0 → 100644
View file @ d0f0e5e7
This diff is collapsed.
cmake_targets/autotests/run_exec_lte-softmodem_tests.py 0 → 100644
View file @ d0f0e5e7
This diff is collapsed.
cmake_targets/autotests/test_case_list.xml 0 → 100644
View file @ d0f0e5e7
This diff is collapsed.
cmake_targets/autotests/tools/configure_cots_bandrich_ue.py 0 → 100755
View file @ d0f0e5e7
#!/usr/bin/python
import time
import serial
import os
from pyroute2 import IPRoute
import sys
import re
import threading
import signal
import traceback
import os
# configure the serial connections (the parameters differs on the device you are connecting to)
#First we find an open port to work with
serial_port=''
ser=serial.Serial()
openair_dir = os.environ.get('OPENAIR_DIR')
if openair_dir == None:
print "Error getting OPENAIR_DIR environment variable"
sys.exit(1)
def find_open_port():
global serial_port, ser
max_ports=100
if os.path.exists(serial_port) == True:
return serial_port
for port in range(2,100):
serial_port = '/dev/ttyUSB'+str(port)
if os.path.exists(serial_port) == True:
print 'New Serial Port : ' + serial_port
break
ser = serial.Serial(port=serial_port)
return
find_open_port()
print 'Using Serial port : ' + serial_port
#serial_port = '/dev/ttyUSB2'
bandrich_ppd_config = os.environ.get('OPENAIR_DIR') + '/cmake_targets/autotests/tools/wdial.bandrich.conf'
exit_flag=0
def signal_handler(signal, frame):
print('You pressed Ctrl+C!')
print('Resetting the UE to detached state')
timeout=10
exit_flag=1
send_command('AT+CGATT=0' , 'OK' , timeout)
sys.exit(0)
signal.signal(signal.SIGINT, signal_handler)
#ser.open()
#ser.isOpen()
class pppThread (threading.Thread):
def __init__(self, threadID, name, counter):
threading.Thread.__init__(self)
self.threadID = threadID
self.name = name
self.counter = counter
def run(self):
print "Starting " + self.name
#Here we keep running pppd thread in indefinite loop as this script terminates sometimes
#while 1:
while 1:
time.sleep(5) #Hard coded, do not reduce this number!
print "Starting wvdial now..."
print 'exit_flag = ' + str(exit_flag)
send_command('AT+CGATT=1','OK', 300)
os.system('wvdial -C ' + bandrich_ppd_config + '' )
if exit_flag == 1:
print "Exit flag set to true. Exiting pppThread now"
print "Terminating wvdial now..."
def send_command (cmd, response, timeout):
count=0
sleep_duration = 1
print 'In function: send_command: cmd = <' + cmd + '> response: <' + response + '> \n'
global serial_port, ser
while count <= timeout:
try:
#Sometimes the port does not exist coz of reset in modem.
#In that case, we need to search for this port again
if os.path.exists(serial_port) == False:
find_open_port()
ser.write (cmd + '\r\n')
out = ''
time.sleep(sleep_duration)
count = count + sleep_duration
while ser.inWaiting() > 0:
out += ser.read(1)
print 'out = <' + out + '> response = <' + response + '> \n'
if re.search(response, out):
break
except Exception, e:
error = ' cmd : ' + cmd + ' response : ' + response
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
def start_ue () :
#print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
timeout=60 #timeout in seconds
send_command('AT', 'OK' , timeout)
send_command('AT+CFUN=1' , 'OK' , timeout)
#send_command('AT+CGATT=0' , 'OK' , timeout)
send_command('AT+CGATT=1','OK', 300)
#os.system('wvdial -C ' + bandrich_ppd_config + ' &' )
thread_ppp = pppThread(1, "ppp_thread", 1)
thread_ppp.start()
iface='ppp0'
while 1:
time.sleep ( 2)
#Now we check if ppp0 interface is up and running
try:
if exit_flag == 1:
break
ip = IPRoute()
idx = ip.link_lookup(ifname=iface)[0]
os.system ('route add 192.172.0.1 ppp0')
os.system ('ping -c 5 192.172.0.1')
break
except Exception, e:
error = ' Interface ' + iface + 'does not exist...'
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
thread_ppp.join()
def stop_ue():
timeout=60
os.system('killall wvdial')
send_command('AT', 'OK' , timeout)
send_command('AT+CGATT=0' , 'OK|ERROR' , timeout)
send_command('AT+CFUN=4' , 'OK' , timeout)
for arg in sys.argv[1:]:
if arg == '--start-ue' :
start_ue()
elif arg == '--stop-ue' :
stop_ue()
else :
print " Script called with wrong arguments, arg = " + arg
sys.exit()
cmake_targets/autotests/tools/exmimo/exmimo_stop.m 0 → 100644
View file @ d0f0e5e7
n=oarf_get_num_detected_cards;
for i=n-1:0
oarf_stop(i);
end
cmake_targets/autotests/tools/exmimo/init_exmimo2 0 → 100755
View file @ d0f0e5e7
#!/bin/bash
################################################################################
# OpenAirInterface
# Copyright(c) 1999 - 2015 Eurecom
#
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
#
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
#
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
#
################################################################################
# file init_nas_nos1
# brief loads the nasmesh module and sets up the radio bearers (used to provide ip interface without S1 interface)
# author Florian Kaltenberger
#
#######################################
load_module()
{
mod_name=${1##*/}
mod_name=${mod_name%.*}
if awk "/$mod_name/ {found=1 ;exit} END {if (found!=1) exit 1}" /proc/modules
then
echo "module $mod_name already loaded: I remove it first"
sudo rmmod $mod_name
fi
echo loading $mod_name
sudo insmod $1
}
function main()
{
PCI=`lspci -m | grep Xilinx`
if [ -z "$PCI" ]; then
echo "No card found. Stopping!"
return
fi
## This part corrects the wrong configuration of the endpoint done by the bios in some machines
echo "$PCI" | while read config_reg; do
SLOT_NUMBER=`echo $config_reg | awk -F\" '{print $1}'`
sudo setpci -s $SLOT_NUMBER 60.b=10
done
load_module $OPENAIR_DIR/targets/bin/openair_rf.ko
sleep 1
if [ ! -e /dev/openair0 ]; then
sudo mknod /dev/openair0 c 127 0
sudo chmod a+rw /dev/openair0
fi
DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
DEVICE_SWID=${DEVICE:2:2}
if [ $DEVICE_SWID == '0a' ]; then
echo "Using firware version 10"
$OPENAIR_DIR/targets/bin/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
else
echo 'No corresponding firmware found'
return
fi
}
main "$@"
cmake_targets/autotests/tools/remove_old_programs.bash 0 → 100755
View file @ d0f0e5e7
#!/bin/bash
#$1 programs to be killed and checked
var=`ps -A |grep -E -i $1`
echo $var
if [ -n "$var" ]; then echo 'Match found'; else echo 'Match not found' ;fi
cmake_targets/autotests/tools/search_repl.py 0 → 100755
View file @ d0f0e5e7
#!/usr/bin/python
import sys
import re
#Arg 1 name of file
#Arg 2 keyword
#arg 3 replacement text
#Note that these should be seperated by spaces
if len(sys.argv) != 4:
print "search_repl.py: Wrong number of arguments. This program needs 3 arguments"
sys.exit()
filename = sys.argv[1]
keyword = sys.argv[2]
replacement_text = sys.argv[3]
file = open(filename, 'r')
string = file.read()
file.close()
if keyword == 'mme_ip_address':
#string = (re.sub(r"mme_ip_address\s*=\s*\([^\$]+)\)\s*;\s*", r"<% tex \1 %>", t, re.M)
replacement_text = keyword + ' = ( { ' + replacement_text + ' } ) ; '
string = re.sub(r"mme_ip_address\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M)
else :
replacement_text = keyword + ' = ' + replacement_text + ' ; '
string = re.sub(r"%s\s*=\s*([^\$]+?)\s*;" % keyword , replacement_text, string, re.M)
#else :
# replacement_text = keyword + ' =\"' + replacement_text + '\" ; '
# string = re.sub(r"%s\s*=\s*\"([^\$]+?)\"\s*;" % keyword , replacement_text, string, re.M)
file = open(filename, 'w')
file.write(string)
file.close()
cmake_targets/autotests/tools/wdial.bandrich.conf 0 → 100644
View file @ d0f0e5e7
[Dialer Defaults]
Modem = /dev/ttyUSB0
ISDN = off
Modem Type = Analog Modem
Baud = 9600
Init = ATZ
Init2 = AT+CPIN?
Init3 = AT+CGREG?
Init4 = AT+COPS?
Init5 = AT+CSQ
Init6 =
Init7 = AT+CGATT=1
Init8 =
Init9 =
Phone = *99***1#
Phone1 =
Phone2 =
Phone3 =
Phone4 =
Dial Prefix =
Dial Attempts = 1
Dial Command = ATM1L3DT
Ask Password = off
Password = ''
Username = ImaginLab
Auto Reconnect = off
Abort on Busy = off
Carrier Check = on
Check Def Route = on
Abort on No Dialtone = on
Stupid Mode = on
Idle Seconds = 0
Auto DNS = on
;Minimize = off
;Dock = off
;Do NOT edit this file by hand!
cmake_targets/build_oai
View file @ d0f0e5e7
......@@ -47,9 +47,14 @@ PRINT_STATS="False"
VCD_TIMING="False"
REL="Rel10"
HW="EXMIMO"
NOS1=0
EPC=0
VERBOSE_COMPILE=0
CFLAGS_PROCESSOR_USER=""
RUN_GROUP=0
TEST_CASE_GROUP=""
trap handle_ctrl_c INT
function print_help() {
echo_info '
......@@ -77,8 +82,6 @@ Options
Makes the LTE softmodem
--UE
Makes the UE specific parts (ue_ip, usim, nvram)
--EPC
Makes the EPC (MME-SPGW, HSS)
--RRH
Makes the RRH
-r | --3gpp-release
......@@ -95,6 +98,8 @@ Options
Makes the core security features unitary simulators
-s | --check
runs a set of auto-tests based on simulators and several compilation tests
--run-group
runs only specified test cases specified here. This flag is only valid with -s
-V | --vcd
Adds a debgging facility to the binary files: GUI with major internal synchronization events
-x | --xforms
......@@ -111,8 +116,8 @@ Options
Usage (first build):
oaisim (eNB + UE): ./build_oai -I -g --oaisim -x --install-system-files
Eurecom EXMIMO + COTS UE : ./build_oai -I -g --eNB --EPC -x --install-system-files
NI/ETTUS B201 + COTS UE : ./build_oai -I -g --eNB --EPC -x --install-system-files -w USRP
Eurecom EXMIMO + COTS UE : ./build_oai -I -g --eNB -x --install-system-files
NI/ETTUS B201 + COTS UE : ./build_oai -I -g --eNB -x --install-system-files -w USRP
Usage (Regular):
oaisim : ./build_oai --oaisim -x
Eurecom EXMIMO + OAI ENB : ./build_oai --eNB -x
......@@ -154,10 +159,6 @@ function main() {
UE=1
echo_info "Will compile UE"
shift;;
--EPC)
EPC=1
echo_info "Will compile EPC"
shift;;
--RRH)
RRH=1
echo_info "Will compile RRH"
......@@ -193,6 +194,11 @@ function main() {
OAI_TEST=1
echo_info "Will run auto-tests"
shift;;
--run-group)
RUN_GROUP=1
TEST_CASE_GROUP=$2
echo_info "executing test cases only in group: $TEST_CASE_GROUP"
shift 2;;
-V | --vcd)
echo_info "setting gtk-wave output"
VCD_TIMING=1
......@@ -265,12 +271,11 @@ function main() {
if [ "$HW" == "OAI_USRP" ] ; then
echo_info "installing packages for USRP support"
check_install_usrp_uhd_driver
fi
fi
if [ "$HW" == "OAI_BLADERF" ] ; then
echo_info "installing packages for BALDERF support"
check_install_bladerf_driver
fi
fi
if [ "$INSTALL_OPTIONAL" = "1" ] ; then
......@@ -321,7 +326,7 @@ function main() {
cmake ..
fi
if [ "$eNB" = "1" ] ; then
if [ "$eNB" = "1" -o "$UE" = "1" ] ; then
echo_info "Compiling $lte_exec"
compilations \
$lte_build_dir $lte_exec \
......@@ -338,7 +343,7 @@ function main() {
fi
fi
if [ "$UE" = 1 ] ; then
if [ "$UE" = 1 -a "$NOS1" = "0" ] ; then
# ue_ip driver compilation
echo_info "Compiling UE specific part"
compilations \
......@@ -407,7 +412,7 @@ function main() {
# EXMIMO drivers & firmware loader
###############
if [ "$HW" = "EXMIMO" -a "$EPC" = "0" ] ; then
if [ "$HW" = "EXMIMO" ] ; then
echo_info "Compiling Express MIMO 2 board drivers"
compilations \
......@@ -545,39 +550,29 @@ function main() {
rrh_gw $dbin/rrh_gw
fi
# EPC compilation
##################
if [ "$EPC" = "1" ] ; then
echo_info "Compiling EPC"
# Example HSS and EPC run on the same host
if [ "$CLEAN" = "1" ]; then
$OPENAIR_DIR/cmake_targets/tools/build_epc --clean --debug --transport-tcp-only --transport-prefer-tcp --s6a-server
$OPENAIR_DIR/cmake_targets/tools/build_hss --clean --debug --transport-tcp-only --transport-prefer-tcp --fqdn `hostname --fqdn` --connect-to-mme `hostname --fqdn`
else
$OPENAIR_DIR/cmake_targets/tools/build_epc --debug --transport-tcp-only --transport-prefer-tcp --s6a-server
$OPENAIR_DIR/cmake_targets/tools/build_hss --debug --transport-tcp-only --transport-prefer-tcp --fqdn `hostname --fqdn` --connect-to-mme `hostname --fqdn`
fi
# if [ "$INSTALL_SYSTEM_FILES" = "1" ] ;then
# if [ -f $dbin/hss.conf ] ; then
# sed -e 's/ *= */=/' $dbin/hss.conf > $dconf/hss.conf.nospace
# source $dconf/hss.conf.nospace
# rm -f $dconf/hss.conf.nospace
# create_hss_database root linux "$MYSQL_user" "$MYSQL_pass" "$MYSQL_db"
# else
# echo_warning "not created HSS database: config not found"
# fi
# fi
fi
# Auto-tests
#####################
if [ "$OAI_TEST" = "1" ]; then
echo_info "10. Running OAI pre commit tests (pre-ci) ..."
echo_error "These scripts ASSUME that user is in /etc/sudoers and can execute commands without PASSWORD prompt"
echo_error "Add the following lines in /etc/sudoers file to make your __user_name__ sudo without password prompt"
echo_error " __your_user_name__ ALL = (ALL:ALL) NOPASSWD: ALL"
echo_error " __your_user_name__ ALL = (ALL) NOPASSWD: ALL "
echo_info "The log file for the autotest script for debugging is located here: $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log "
echo_info "The results of autotests results is located here: $OPENAIR_DIR/cmake_targets/autotests/log/results_autotests.xml "
echo_info "You can hit CTRL-C any time to terminate the autotests..."
echo "Current User Name: $USER"
read -s -p "Enter Password: " mypassword
echo -e "\n"
rm -fr $OPENAIR_DIR/cmake_targets/autotests/log
mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
$OPENAIR_DIR/cmake_targets/autotests/run_compilation_autotests.bash
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash
if [ "$RUN_GROUP" -eq "1" ]; then
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
else
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
fi
wait
else
echo_info "10. Bypassing the Tests ..."
fi
......
cmake_targets/lte-simulators/CMakeLists.txt
View file @ d0f0e5e7
......@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "unitary_tests_simulators")
set(PHYSIM True)
set(RF_BOARD None)
set(XFORMS False)
set(XFORMS True)
set(DEBUG_PHY False)
set(MU_RECIEVER False)
......
cmake_targets/tools/build_helper
View file @ d0f0e5e7
......@@ -111,7 +111,12 @@ compilations() {
cd $OPENAIR_DIR/cmake_targets/$1/build
{
rm -f $3
make -j`nproc` $2 VERBOSE=$VERBOSE_COMPILE
if [ "$VERBOSE_COMPILE" == "1" ]; then
make -j`nproc` $2 VERBOSE=$VERBOSE_COMPILE
else
make -j`nproc` $2
fi
} > $dlog/$2.$REL.txt 2>&1
echo_info "Log file for compilation has been written to: $dlog/$2.$REL.txt"
if [ -s $3 ] ; then
......@@ -158,22 +163,33 @@ install_gnutls_from_source(){
check_install_usrp_uhd_driver(){
log_file=$OPENAIR_DIR/cmake_targets/log/check_install_usrp_uhd_driver_log.txt
echo_info "\nIn function: check_install_usrp_uhd_driver(). Installing USRP Drivers : The logfile for the installation is located here: $log_file "
(
v=$(lsb_release -cs)
$SUDO apt-add-repository "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
$SUDO apt-get update
$SUDO apt-get -y install python python-tk libboost-all-dev libusb-1.0-0-dev
$SUDO apt-get -y install -t `lsb_release -cs` uhd --force-yes
) >& $log_file
}
check_install_bladerf_driver(){
log_file=$OPENAIR_DIR/cmake_targets/log/check_install_bladerf_driver_log.txt
echo_info "\nIn function: check_install_bladerf_driver(). Install BLADERF drivers : The logfile for the installation is located here: $log_file "
(
$SUDO add-apt-repository -y ppa:bladerf/bladerf
$SUDO apt-get update
$SUDO apt-get install -y bladerf libbladerf-dev
$SUDO apt-get install bladerf-firmware-fx3
$SUDO apt-get install bladerf-fpga-hostedx40
$SUDO apt-get install -y bladerf-firmware-fx3
$SUDO apt-get install -y bladerf-fpga-hostedx40
bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
) >& $log_file
}
check_install_additional_tools (){
log_file=$OPENAIR_DIR/cmake_targets/log/check_install_additional_tools_log.txt
echo_info "\nIn function: check_install_oai_software(). Installing optional OAI packages : The logfile for the installation is located here: $log_file "
(
$SUDO apt-get update
$SUDO apt-get install -y \
check \
......@@ -194,27 +210,32 @@ check_install_additional_tools (){
unzip \
valgrind \
vlan \
ctags
ctags \
ntpdate
) >& $log_file
}
check_install_oai_software() {
log_file=$OPENAIR_DIR/cmake_targets/log/check_install_oai_software_log.txt
echo_info "\nIn function: check_install_oai_software(). Installing mandatory OAI packages : The logfile for the installation is located here: $log_file "
(
$SUDO apt-get update
$SUDO apt-get install -y \
autoconf \
autoconf \
automake \
bison \
build-essential \
cmake \
cmake-curses-gui \
doxygen \
doxygen-gui\
texlive-latex-base\
doxygen-gui \
texlive-latex-base \
ethtool \
flex \
gccxml \
gdb \
git \
gccxml \
gdb \
git \
graphviz \
gtkwave \
guile-2.0-dev \
......@@ -233,7 +254,7 @@ check_install_oai_software() {
libgmp-dev \
libgtk-3-dev \
libidn2-0-dev \
libidn11-dev \
libidn11-dev \
libmysqlclient-dev \
liboctave-dev \
libpgm-5.1 \
......@@ -254,7 +275,12 @@ check_install_oai_software() {
openssh-server \
openssl \
python \
subversion
subversion \
xmlstarlet \
python-pip \
pydb \
wvdial \
python-numpy
$SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
if [ `lsb_release -rs` = '12.04' ] ; then
install_nettle_from_source
......@@ -262,20 +288,29 @@ check_install_oai_software() {
else
$SUDO apt-get install -y libgnutls-dev nettle-dev nettle-bin
fi
$SUDO pip install paramiko
$SUDO pip install pyroute2
) > $log_file 2>&1
install_asn1c_from_source
$SUDO rm -fr /opt/ssh
$SUDO git clone https://gist.github.com/2190472.git /opt/ssh
}
install_asn1c_from_source(){
asn1_install_dir=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_dir "
(
rm -rf /tmp/asn1c-r1516
mkdir -p /tmp/asn1c-r1516
cd /tmp/asn1c-r1516
rm -rf /tmp/asn1c-r1516/*
svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516 > /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0 >> /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0 >> /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0 >> /tmp/log_compile_asn1c
svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0
patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0
./configure
make > /tmp/log_compile_asn1c 2>&1
$SUDO make install
make -j`nproc`
$SUDO make install
) > $asn1_install_dir 2>&1
}
#################################################
......@@ -318,3 +353,42 @@ set_openair_env(){
export OPENAIR_TARGETS=$openair_path/targets
}
################################
# Function to killall the subprocesses when Ctrl-C Key is hit
###############################
function handle_ctrl_c(){
CURPID=$$
ppid=$$
arraycounter=1
echo_info "** Trapped CTRL-C. Killing all subprocesses now..."
while true
do
FORLOOP=FALSE
# Get all the child process id
for i in `ps -ef| awk '$3 == '$ppid' { print $2 }'`
do
if [ $i -ne $CURPID ] ; then
procid[$arraycounter]=$i
arraycounter=`expr $arraycounter + 1`
ppid=$i
FORLOOP=TRUE
fi
done
if [ "$FORLOOP" = "FALSE" ] ; then
arraycounter=`expr $arraycounter - 1`
## We want to kill child process id first and then parent id's
while [ $arraycounter -ne 0 ]
do
echo "first we send ctrl-c to program"
$SUDO kill -INT "${procid[$arraycounter]}"
sleep 5
echo "Now we force kill if that didn't work"
$SUDO kill -9 "${procid[$arraycounter]}" >/dev/null
arraycounter=`expr $arraycounter - 1`
done
exit
fi
done
}
cmake_targets/tools/init_nas_nos1 100644 → 100755
View file @ d0f0e5e7
File mode changed from 100644 to 100755
cmake_targets/tools/perf_oai.bash
View file @ d0f0e5e7
......@@ -68,7 +68,7 @@ declare MAX_RATE=1000
# set paths to the required binaries and check if the required binaries are available
ENB_CONFIG=$OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf
OAISIM_EXEC=$OPENAIR_DIR/targets/bin/oaisim_nos1
OAISIM_EXEC=$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
BYPASSE_ITTI=0
OTGPLOT="$OPENAIR2_DIR/UTIL/OTG/OTGplot"
PS2PDF="ps2pdf"
......@@ -301,8 +301,8 @@ oaisim_otg_stats(){
sync
if [ ! -f $OAISIM_EXEC ]; then
echo_info "3.1 compiling OAISIM ($OPENAIR_TARGETS/cmake_targets/build_oai --oaisim -c)"
($OPENAIR_TARGETS/cmake_targets/build_oai --oaisim -c >> results/perf_log.txt 2>&1 )
echo_info "3.1 compiling OAISIM ($OPENAIR_DIR/cmake_targets/build_oai --oaisim -c --noS1)"
($OPENAIR_DIR/cmake_targets/build_oai --oaisim -c --noS1 >> results/perf_log.txt 2>&1 )
build_stats=$?
if [ $build_stats != 0 ] ; then
echo_error "$OAISIM_EXEC cannot be built, check results/perf_log.txt file"
......
cmake_targets/tools/test_helper
View file @ d0f0e5e7
......@@ -24,34 +24,40 @@ xUnit_start() {
# \param $1 classname
# \param $2 testcase name
# \param $3 testcase result
# \param $4 run index
# \param $4 run result
# \param $5 XML file local to test case for storing its own results
xUnit_fail() {
class=$1
test_case=$2
result=$3
run_index=$4
run_result=$4
xmlfile_testcase=$5
currtime=$(date +%s.%N)
time=$(echo "$currtime - $XUNIT_START" | bc -l)
xml="<testcase classname='$class' name='$test_case' run='$run_index' time='$time' RESULT='$result'></testcase>"
xml="<testcase classname='$class' name='$test_case' Run_result='$run_result' time='$time s' RESULT='$result'></testcase>"
echo -e $xml >> $xmlfile_testcase
XUNIT_TESTCASES_XML="$XUNIT_TESTCASES_XML \n$xml"
XUNIT_FAILED=$((XUNIT_FAILED+1))
}
## Call this after the testcase finished successfully.
# \sa xUnit_fail()
# \sa xUnit_success()
# \pre xUnit_start() must have been called before
# \param $1 classname
# \param $2 testcase name
# \param $3 testcase result
# \param $4 run index
# \param $4 run result
# \param $5 XML file local to test case for storing its own results
xUnit_success() {
class=$1
test_case=$2
result=$3
run_index=$4
run_result=$4
xmlfile_testcase=$5
currtime=$(date +%s.%N)
time=$(echo "$currtime - $XUNIT_START" | bc -l)
xml="<testcase classname='$class' name='$test_case' run='$run_index' time='$time' RESULT='$result'></testcase>"
xml="<testcase classname='$class' name='$test_case' Run_result='$run_result' time='$time s' RESULT='$result'></testcase>"
echo -e $xml >> $xmlfile_testcase
XUNIT_TESTCASES_XML="$XUNIT_TESTCASES_XML \n$xml"
XUNIT_SUCCESS=$((XUNIT_SUCCESS+1))
}
......
oaienv
View file @ d0f0e5e7
......@@ -5,7 +5,8 @@ export OPENAIR1_DIR=$OPENAIR_HOME/openair1
export OPENAIR2_DIR=$OPENAIR_HOME/openair2
export OPENAIR3_DIR=$OPENAIR_HOME/openair3
export OPENAIR_TARGETS=$OPENAIR_HOME/targets
export OPENAIRITS_DIR=$OPENAIR_HOME/openairITS
export PATH=$PATH:$OPENAIR_TARGETS/bin
alias oai='cd $OPENAIR_HOME'
alias oai0='cd $OPENAIR0_DIR'
......
openair1/PHY/LTE_ESTIMATION/adjust_gain.c
View file @ d0f0e5e7
......@@ -53,7 +53,7 @@ phy_adjust_gain (PHY_VARS_UE *phy_vars_ue, uint8_t eNB_id)
if (rssi>0) rx_power_fil_dB = rssi;
else rx_power_fil_dB = phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id];
printf("Gain control: rssi %d (%d,%d)\n",
LOG_D(PHY,"Gain control: rssi %d (%d,%d)\n",
rssi,
phy_vars_ue->PHY_measurements.rssi,
phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id]
......
openair1/PHY/LTE_TRANSPORT/dci_tools.c
View file @ d0f0e5e7
......@@ -1102,8 +1102,12 @@ int generate_eNB_dlsch_params_from_dci(int frame,
dlsch[0]->harq_ids[subframe] = harq_pid;
if (dlsch0_harq->round == 0)
if (dlsch0_harq->round == 0) {
/* necessary test? */
if (dlsch0_harq->status == SCH_IDLE)
remove_harq_pid_from_freelist(dlsch[0], harq_pid);
dlsch0_harq->status = ACTIVE;
}
break;
......@@ -1237,6 +1241,9 @@ int generate_eNB_dlsch_params_from_dci(int frame,
if (dlsch0_harq->round == 0) {
/* necessary test? */
if (dlsch0_harq->status == SCH_IDLE)
remove_harq_pid_from_freelist(dlsch[0], harq_pid);
dlsch0_harq->status = ACTIVE;
// printf("Setting DLSCH process %d to ACTIVE\n",harq_pid);
// MCS and TBS don't change across HARQ rounds
......@@ -1605,10 +1612,16 @@ int generate_eNB_dlsch_params_from_dci(int frame,
// reset HARQ process if this is the first transmission
if (dlsch0_harq->round == 0) {
/* necessary test? */
if (dlsch0_harq->status == SCH_IDLE)
remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
}
if (dlsch1_harq->round == 0) {
/* necessary test? */
if (dlsch1_harq->status == SCH_IDLE)
remove_harq_pid_from_freelist(dlsch1, harq_pid);
dlsch1_harq->status = ACTIVE;
}
......@@ -1986,10 +1999,16 @@ int generate_eNB_dlsch_params_from_dci(int frame,
// reset HARQ process if this is the first transmission
if ((dlsch0->active==1) && (dlsch0_harq->round == 0)) {
/* necessary test? */
if (dlsch0_harq->status == SCH_IDLE)
remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
}
if ((dlsch1->active==1) && (dlsch1_harq->round == 0)) {
/* necessary test? */
if (dlsch1_harq->status == SCH_IDLE)
remove_harq_pid_from_freelist(dlsch1, harq_pid);
dlsch1_harq->status = ACTIVE;
}
......@@ -2131,16 +2150,23 @@ int generate_eNB_dlsch_params_from_dci(int frame,
// check if either TB is disabled (see 36-213 V8.6 p. 26)
if ((dlsch0_harq->rvidx == 1) && (dlsch0_harq->mcs == 0))
if ((dlsch0_harq->rvidx == 1) && (dlsch0_harq->mcs == 0)) {
LOG_W(PHY, "what to do with respect to remove_harq_pid_from_freelist?\n");
dlsch0_harq->status = DISABLED;
}
if ((dlsch1_harq->rvidx == 1) && (dlsch1_harq->mcs == 0))
if ((dlsch1_harq->rvidx == 1) && (dlsch1_harq->mcs == 0)) {
LOG_W(PHY, "what to do with respect to remove_harq_pid_from_freelist?\n");
dlsch1_harq->status = DISABLED;
}
dlsch0_harq->Nl = 1;
if (dlsch0_harq->round == 0) {
/* necessary test? */
if (dlsch0_harq->status == SCH_IDLE)
remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
// printf("Setting DLSCH process %d to ACTIVE\n",harq_pid);
}
......@@ -2305,11 +2331,17 @@ int generate_eNB_dlsch_params_from_dci(int frame,
if ((dlsch0_harq->round == 0) && (dlsch0->active == 1) ) {
/* necessary test? */
if (dlsch0_harq->status == SCH_IDLE)
remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
dlsch0_harq->mcs = mcs1;
}
if ((dlsch1_harq->round == 0) && (dlsch1->active == 1) ) {
/* necessary test? */
if (dlsch1_harq->status == SCH_IDLE)
remove_harq_pid_from_freelist(dlsch1, harq_pid);
dlsch1_harq->status = ACTIVE;
dlsch1_harq->mcs = mcs2;
}
......@@ -2473,6 +2505,9 @@ int generate_eNB_dlsch_params_from_dci(int frame,
if (dlsch0_harq->round == 0) {
/* necessary test? */
if (dlsch0_harq->status == SCH_IDLE)
remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
// printf("Setting DLSCH process %d to ACTIVE\n",harq_pid);
}
......@@ -2602,6 +2637,9 @@ int generate_eNB_dlsch_params_from_dci(int frame,
// dlsch0_harq->Ndi = ((DCI1E_5MHz_2A_M10PRB_TDD_t *)dci_pdu)->ndi;
if (dlsch0_harq->round == 0) {
/* necessary test? */
if (dlsch0_harq->status == SCH_IDLE)
remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
// printf("Setting DLSCH process %d to ACTIVE\n",harq_pid);
}
......
openair1/PHY/LTE_TRANSPORT/defs.h
View file @ d0f0e5e7
......@@ -258,6 +258,13 @@ typedef struct {
uint8_t error_threshold;
/// Pointers to 8 HARQ processes for the DLSCH
LTE_DL_eNB_HARQ_t *harq_processes[8];
/// circular list of free harq PIDs (the oldest come first)
/// (10 is arbitrary value, must be > to max number of DL HARQ processes in LTE)
int harq_pid_freelist[10];
/// the head position of the free list (if list is free then head=tail)
int head_freelist;
/// the tail position of the free list
int tail_freelist;
/// Number of soft channel bits
uint32_t G;
/// Codebook index for this dlsch (0,1,2,3)
......
openair1/PHY/LTE_TRANSPORT/dlsch_coding.c
View file @ d0f0e5e7
......@@ -152,6 +152,9 @@ LTE_eNB_DLSCH_t *new_eNB_dlsch(unsigned char Kmimo,unsigned char Mdlharq,unsigne
for (i=0; i<10; i++)
dlsch->harq_ids[i] = Mdlharq;
dlsch->head_freelist = 0;
dlsch->tail_freelist = 0;
for (i=0; i<Mdlharq; i++) {
dlsch->harq_processes[i] = (LTE_DL_eNB_HARQ_t *)malloc16(sizeof(LTE_DL_eNB_HARQ_t));
LOG_T(PHY, "Required mem size %d (bw scaling %d), dlsch->harq_processes[%d] %p\n",
......@@ -192,6 +195,8 @@ LTE_eNB_DLSCH_t *new_eNB_dlsch(unsigned char Kmimo,unsigned char Mdlharq,unsigne
msg("Can't get harq_p %d\n",i);
exit_flag=3;
}
put_harq_pid_in_freelist(dlsch, i);
}
if (exit_flag==0) {
......
openair1/PHY/LTE_TRANSPORT/dlsch_llr_computation.c
View file @ d0f0e5e7
......@@ -662,16 +662,17 @@ int dlsch_qpsk_llr(LTE_DL_FRAME_PARMS *frame_parms,
if ((symbol_mod==0) || (symbol_mod==(4-frame_parms->Ncp))) {
if (frame_parms->mode1_flag==0)
len = (nb_rb*8);// - (2*pbch_pss_sss_adjust/3);
len = (nb_rb*8)- (2*pbch_pss_sss_adjust/3);
else
len = (nb_rb*10);// - (5*pbch_pss_sss_adjust/6);
len = (nb_rb*10) - (5*pbch_pss_sss_adjust/6);
} else {
len = (nb_rb*12);// - pbch_pss_sss_adjust;
len = (nb_rb*12) - pbch_pss_sss_adjust;
}
// printf("dlsch_qpsk_llr: symbol %d,nb_rb %d, len %d,pbch_pss_sss_adjust %d\n",symbol,nb_rb,len,pbch_pss_sss_adjust);
// printf("dlsch_qpsk_llr: symbol %d,nb_rb %d, len %d,pbch_pss_sss_adjust %d\n",symbol,nb_rb,len,pbch_pss_sss_adjust);
for (i=0; i<len; i++) {
*llr32 = *rxF;
// printf("llr %d : (%d,%d)\n",i,((int16_t*)llr32)[0],((int16_t*)llr32)[1]);
rxF++;
llr32++;
}
......
openair1/PHY/LTE_TRANSPORT/proto.h
View file @ d0f0e5e7
......@@ -72,17 +72,20 @@ LTE_eNB_DLSCH_t *new_eNB_dlsch(uint8_t Kmimo,uint8_t Mdlharq,uint8_t N_RB_DL, ui
*/
void free_ue_dlsch(LTE_UE_DLSCH_t *dlsch);
LTE_eNB_ULSCH_t *new_eNB_ulsch(uint8_t Mdlharq,uint8_t max_turbo_iterations,uint8_t N_RB_UL, uint8_t abstraction_flag);
LTE_UE_DLSCH_t *new_ue_dlsch(uint8_t Kmimo,uint8_t Mdlharq,uint8_t max_turbo_iterations,uint8_t N_RB_DL, uint8_t abstraction_flag);
LTE_UE_ULSCH_t *new_ue_ulsch(unsigned char Mdlharq,unsigned char N_RB_UL, uint8_t abstraction_flag);
void clean_eNb_ulsch(LTE_eNB_ULSCH_t *ulsch, uint8_t abstraction_flag);
void free_ue_ulsch(LTE_UE_ULSCH_t *ulsch);
LTE_UE_ULSCH_t *new_ue_ulsch(uint8_t Mdlharq, unsigned char N_RB_UL, uint8_t abstraction_flag);
LTE_eNB_ULSCH_t *new_eNB_ulsch(uint8_t Mdlharq,uint8_t max_turbo_iterations,uint8_t N_RB_UL, uint8_t abstraction_flag);
LTE_UE_ULSCH_t *new_ue_ulsch(uint8_t Mdlharq, unsigned char N_RB_UL, uint8_t abstraction_flag);
/** \fn dlsch_encoding(uint8_t *input_buffer,
LTE_DL_FRAME_PARMS *frame_parms,
......@@ -1764,7 +1767,9 @@ double computeRhoB_UE(PDSCH_CONFIG_DEDICATED *pdsch_config_dedicated,
LTE_UE_DLSCH_t *dlsch_ue);
*/
uint8_t get_prach_prb_offset(LTE_DL_FRAME_PARMS *frame_parms, uint8_t tdd_mapindex, uint16_t Nf);
uint8_t get_prach_prb_offset(LTE_DL_FRAME_PARMS *frame_parms, uint8_t tdd_mapindex, uint16_t Nf);
uint8_t ul_subframe2pdcch_alloc_subframe(LTE_DL_FRAME_PARMS *frame_parms,uint8_t n);
/**@}*/
#endif
openair1/PHY/TOOLS/cdot_prod.c
View file @ d0f0e5e7
......@@ -115,11 +115,11 @@ int32_t dot_product(int16_t *x,
// convert back to integer
result = _mm_cvtsi64_si32(mmtmp7);
return(result);
_mm_empty();
_m_empty();
return(result);
#elif defined(__arm__)
int16x4_t *x_128=(int16x4_t*)x;
int16x4_t *y_128=(int16x4_t*)y;
......
openair1/PHY/TOOLS/lte_dfts.c
View file @ d0f0e5e7
......@@ -94,7 +94,7 @@ static inline void cmacc(__m128i a,__m128i b, __m128i *re32, __m128i *im32)
cmac_tmp = _mm_sign_epi16(b,*(__m128i*)reflip);
// cmac_tmp = _mm_shufflelo_epi16(b,_MM_SHUFFLE(2,3,0,1));
// cmac_tmp = _mm_shufflehi_epi16(cmac_tmp,_MM_SHUFFLE(2,3,0,1));
cmac_tmp = _mm_shuffle_epi8(b,_mm_set_epi8(13,12,15,14,9,8,11,10,5,4,7,6,1,0,3,2));
cmac_tmp = _mm_shuffle_epi8(cmac_tmp,_mm_set_epi8(13,12,15,14,9,8,11,10,5,4,7,6,1,0,3,2));
cmac_tmp_im32 = _mm_madd_epi16(cmac_tmp,a);
*re32 = _mm_add_epi32(*re32,cmac_tmp_re32);
openair1/SCHED/defs.h
View file @ d0f0e5e7
......@@ -401,6 +401,8 @@ uint16_t get_Np(uint8_t N_RB_DL,uint8_t nCCE,uint8_t plus1);
int get_nCCE_offset(unsigned char L, int nCCE, int common_dci, unsigned short rnti, unsigned char subframe);
void put_harq_pid_in_freelist(LTE_eNB_DLSCH_t *DLSCH_ptr, int harq_pid);
void remove_harq_pid_from_freelist(LTE_eNB_DLSCH_t *DLSCH_ptr, int harq_pid);
int8_t find_ue(uint16_t rnti, PHY_VARS_eNB *phy_vars_eNB);
int32_t add_ue(int16_t rnti, PHY_VARS_eNB *phy_vars_eNB);
......
openair1/SCHED/phy_procedures_lte_eNb.c
View file @ d0f0e5e7
This diff is collapsed.
openair1/SIMULATION/LTE_PHY/dlsim.c
View file @ d0f0e5e7
This diff is collapsed.
openair1/SIMULATION/LTE_PHY/mbmssim.c
View file @ d0f0e5e7
......@@ -54,8 +54,6 @@
#include "OCG_vars.h"
//#define BW 5.0
PHY_VARS_eNB *PHY_vars_eNB;
PHY_VARS_UE *PHY_vars_UE;
......@@ -131,7 +129,7 @@ int main(int argc, char **argv)
char c;
int i,l,aa,aarx;
int i,l,aa,aarx,k;
double sigma2, sigma2_dB=0,SNR,snr0=-2.0,snr1=0.0;
uint8_t snr1set=0;
double snr_step=1,input_snr_step=1;
......@@ -172,7 +170,6 @@ int main(int argc, char **argv)
unsigned int trials,errs[4]= {0,0,0,0}; //,round_trials[4]={0,0,0,0};
uint8_t N_RB_DL=25,osf=1;
double BW=5.0;
uint32_t perfect_ce = 0;
lte_frame_type_t frame_type = FDD;
......@@ -255,27 +252,9 @@ int main(int argc, char **argv)
case 'R':
N_RB_DL = atoi(optarg);
switch (N_RB_DL) {
case 6:
BW=1.25;
break;
case 25:
BW=5.0;
break;
case 50:
BW=10.0;
break;
case 100:
BW=20.0;
break;
default:
if ((N_RB_DL!=6) && (N_RB_DL!=25) && (N_RB_DL!=50) && (N_RB_DL!=100)) {
printf("Unsupported Bandwidth %d\n",N_RB_DL);
exit(-1);
break;
}
break;
......@@ -397,7 +376,8 @@ int main(int argc, char **argv)
eNB2UE = new_channel_desc_scm(PHY_vars_eNB->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNB->lte_frame_parms.N_RB_DL),
N_RB2channel_bandwidth(PHY_vars_eNB->lte_frame_parms.N_RB_DL),
0,
0,
0);
......@@ -541,15 +521,26 @@ int main(int argc, char **argv)
subframe%10,
0,
0);
}
for (l=2; l<12; l++) {
rx_pmch(PHY_vars_UE,
if (PHY_vars_UE->perfect_ce==1) {
// fill in perfect channel estimates
freq_channel(eNB2UE,PHY_vars_UE->lte_frame_parms.N_RB_DL,12*PHY_vars_UE->lte_frame_parms.N_RB_DL + 1);
for(k=0; k<NUMBER_OF_eNB_MAX; k++) {
for(aa=0; aa<frame_parms->nb_antennas_tx; aa++) {
for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++) {
for (i=0; i<frame_parms->N_RB_DL*12; i++) {
((int16_t *) PHY_vars_UE->lte_ue_common_vars.dl_ch_estimates[k][(aa<<1)+aarx])[2*i+(l*frame_parms->ofdm_symbol_size+LTE_CE_FILTER_LENGTH)*2]=(int16_t)(eNB2UE->chF[aarx+(aa*frame_parms->nb_antennas_rx)][i].x*AMP);
((int16_t *) PHY_vars_UE->lte_ue_common_vars.dl_ch_estimates[k][(aa<<1)+aarx])[2*i+1+(l*frame_parms->ofdm_symbol_size+LTE_CE_FILTER_LENGTH)*2]=(int16_t)(eNB2UE->chF[aarx+(aa*frame_parms->nb_antennas_rx)][i].y*AMP);
}
}
}
}
}
rx_pmch(PHY_vars_UE,
0,
subframe%10,
l);
}
PHY_vars_UE->dlsch_ue_MCH[0]->harq_processes[0]->G = get_G(&PHY_vars_UE->lte_frame_parms,
......
openair1/SIMULATION/LTE_PHY/pbchsim.c
View file @ d0f0e5e7
......@@ -53,9 +53,6 @@
#include "OCG_vars.h"
#define BW 5.0
PHY_VARS_eNB *PHY_vars_eNb,*PHY_vars_eNb1,*PHY_vars_eNb2;
PHY_VARS_UE *PHY_vars_UE;
......@@ -485,7 +482,8 @@ int main(int argc, char **argv)
eNB2UE = new_channel_desc_scm(PHY_vars_eNb->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNb->lte_frame_parms.N_RB_DL),
N_RB2channel_bandwidth(PHY_vars_eNb->lte_frame_parms.N_RB_DL),
0,
0,
0);
......@@ -494,7 +492,8 @@ int main(int argc, char **argv)
eNB2UE1 = new_channel_desc_scm(PHY_vars_eNb->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNb->lte_frame_parms.N_RB_DL),
N_RB2channel_bandwidth(PHY_vars_eNb->lte_frame_parms.N_RB_DL),
0,
4,
0);
......@@ -503,7 +502,8 @@ int main(int argc, char **argv)
eNB2UE2 = new_channel_desc_scm(PHY_vars_eNb->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNb->lte_frame_parms.N_RB_DL),
N_RB2channel_bandwidth(PHY_vars_eNb->lte_frame_parms.N_RB_DL),
0,
8,
0);
......
openair1/SIMULATION/LTE_PHY/pdcchsim.c
View file @ d0f0e5e7
This diff is collapsed.
openair1/SIMULATION/LTE_PHY/prachsim.c
View file @ d0f0e5e7
This diff is collapsed.
openair1/SIMULATION/LTE_PHY/pucchsim.c
View file @ d0f0e5e7
This diff is collapsed.
openair1/SIMULATION/LTE_PHY/ulsim.c
View file @ d0f0e5e7
This diff is collapsed.
openair1/SIMULATION/TOOLS/abstraction.c
View file @ d0f0e5e7
This diff is collapsed.
openair1/SIMULATION/TOOLS/defs.h
View file @ d0f0e5e7
This diff is collapsed.
openair1/SIMULATION/TOOLS/random_channel.c
View file @ d0f0e5e7
This diff is collapsed.
openair3/TEST/test_kdf.c
View file @ d0f0e5e7
This diff is collapsed.
openair3/TEST/test_secu_kenb.c
View file @ d0f0e5e7
This diff is collapsed.
openair3/TEST/test_secu_knas.c
View file @ d0f0e5e7
This diff is collapsed.
openair3/TEST/test_secu_knas_encrypt_eea1.c
View file @ d0f0e5e7
This diff is collapsed.
openair3/TEST/test_secu_knas_encrypt_eea2.c
View file @ d0f0e5e7
This diff is collapsed.
targets/ARCH/COMMON/common_lib.c
View file @ d0f0e5e7
This diff is collapsed.
targets/ARCH/COMMON/common_lib.h
View file @ d0f0e5e7
This diff is collapsed.
targets/ARCH/EXMIMO/DEFS/pcie_interface.h
View file @ d0f0e5e7
This diff is collapsed.
targets/RT/USER/eNB_transport_IQ.c
View file @ d0f0e5e7
This diff is collapsed.
targets/RT/USER/lte-softmodem.c
View file @ d0f0e5e7
This diff is collapsed.
targets/RT/USER/lte-ue.c
View file @ d0f0e5e7
This diff is collapsed.
targets/RT/USER/rrh_gw.c
View file @ d0f0e5e7
This diff is collapsed.
targets/RT/USER/rrh_gw.h
View file @ d0f0e5e7
This diff is collapsed.
targets/SIMU/USER/channel_sim.c
View file @ d0f0e5e7
This diff is collapsed.
targets/SIMU/USER/oaisim_functions.c
View file @ d0f0e5e7
This diff is collapsed.
targets/SIMU/USER/sinr_sim.c
View file @ d0f0e5e7
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment