Skip to content

O
OpenXG-RAN
Commit d428222d authored by Lionel Gauthier's avatar Lionel Gauthier
Browse files
Options

Clean 


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@7379 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent e179ab0e
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 11644 deletions
openair3/EXAMPLES/3Nodes_EMULATION/ch_conf_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR1_DIR=~/Openair/openair1
export OPENAIR2_DIR=~/Openair/openair2
export OPENAIR3_DIR=~/Openair/openair3
export OPENAIR3_HOME=~/Openair/openair3
echo Clusterhead address is $CH1_IN6_ADDR
#echo Launching AS and RF
#./start_openair.sh 8 0
# Installing NASMESH driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
echo Classification rules for CH
#CH1<-> MR1 IP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_IN6_ADDR -y $MR1_IN6_ADDR -r 12
#CH1<-> MR1 MPLS user-plane bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
#CH1<->MR1 - For com between MN1 and MN3 - MPLS user-plane bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MN3_CH1_MR1_MN1 -m $MN1_MR1_CH1_MN3 -r 13
#CH1<-> MR1 multicast (rajout THC)
echo EADS Multicast for CH1
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 12
#CH1<-> MR2 (IP Signaling)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x $CH1_IN6_ADDR -y $MR2_IN6_ADDR1 -r 20
#CH1<-> MR2 (MPLS user-plane bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -l $MR2_CH1_LABEL_IN -m $MR2_CH1_LABEL_OUT -r 21
#CH1<-> MR2 (MPLS PMIP signaling bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -l $CH1_MR2_CH2_LABEL_OUT -m $CH1_MR2_CH2_LABEL_IN -r 21
#CH1<-> MR2 - For com between MN1 and MN3 - (MPLS signaling bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MN1_CH1_MR2_MN3 -m $MN3_MR2_CH1_MN1 -r 21
#CH1<-> MR2 multicast EADS (rajout THC)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 20
#CH Broadcast (transmission of Router ADV)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -x $CH1_IN6_ADDR -y ff02::1 -r 3
#CH<-> MR1 Imulticast
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x ff3e:30:2001:660:5502:ffff:e000:3737 -y $MR1_IN_ADDR -r 14
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.2 -t 224.0.55.55 -r 12
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.1 -t 224.0.55.55 -r 12
#CH<-> MR2 (IP Signaling)
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH_ADDR -y $MR2_IN_ADDR -r 20
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.1 -t 224.0.66.66 -r 20
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.3 -t 224.0.66.66 -r 20
#CH<-> MR2 (MPLS user-plane bearer)
# Bring up openair NASMESH device and set IPv6 address
sudo ifconfig nasmesh0 up
sudo ip addr add 10.0.0.1/24 dev nasmesh0
sudo ip -6 addr add $CH1_IN6_ADDR/64 dev nasmesh0
echo No MPLS debug
echo "0" > /sys/mpls/debug
#echo Multicast state launched with config_ch1
#xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_ch1 &
#xterm -hold -e ./mac_sim -m0 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top &
openair3/EXAMPLES/3Nodes_EMULATION/ch_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sudo ./ch_conf_nas.sh
# MN1 -> MN2
sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
# MN2 -> MN1
sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
# MN1 -> MN3
sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
# MN3 -> MN1
sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
# CH1 -> CH2
#echo 'CH2->MR2->CH1'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
#echo 'CH1->MR2->CH2'
var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
echo 0 > /sys/mpls/debug
# PMIP
echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
xterm -hold -e "cd /homes/foubert/Openair/openair2/SIMULATION/USER_TOOLS/LAYER2_SIM ; ./mac_sim -m0 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top"
#watch -n .1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
#./stop_rf.sh
sleep 2
./del_mpls.sh
#sleep 2
#./del_mpls.sh
openair3/EXAMPLES/3Nodes_EMULATION/del_mpls.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Script by Irina Dumitrascu (dumitrascu.irina@gmail.com) and Adrian Popa (adrian.popa.gh@gmail.com)
#June 2006
#Released under GPL
#Added by phil, Huu Nghia, 8 July 08
echo Deleting all mpls - xc settings
xc_output="`mpls xc show | cut -c 9-75`"
number_of_lines=`echo $xc_output|wc -l`
for i in `seq 1 $number_of_lines`
do
xc_output_line="`echo $xc_output| head -$i | tail -1`"
echo Deleting: mpls xc del $xc_output_line
mpls xc del $xc_output
#increment i
i=`expr $i+1`
done
echo Deleting all mpls - ip route settings
nr_of_lines=` ip route show |grep mpls |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`ip route show |grep mpls |head -1`
echo Deleting: ip route del $output
ip route del $output
i=`expr $i+1`
done
var1=`ip route show table 1`
if [ ! -z "$var1" ]; then
ip route del table 1
#var1=`ip route show table 1`
#ip route del $var1 table 1
ip route flush table 1
echo "clearing ip route table 1"
fi
var1=`ip route show table 2`
if [ ! -z "$var1" ]; then
ip route del table 2
# var1=`ip route show table 2`
# ip route del $var1 table 2
ip route flush table 2
echo "clearing ip route table 2"
fi
#echo Flushing iptables chains
#iptables -F
#echo Flushing iptables -t nat
#iptables -t nat -F
#echo Flushing iptables -t mangle
#iptables -t mangle -F
echo Deleting all mpls - nhlfe settings
nr_of_lines=` mpls nhlfe show |grep key |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`mpls nhlfe show |grep key |cut -c 17-26 |head -1`
echo Deleting: mpls nhlfe del key $output
mpls nhlfe del key $output
i=`expr $i+1`
done
echo Deleting all mpls - labelspace settings
nr_of_lines=`mpls labelspace show |grep -v "labelspace -1" |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`mpls labelspace show |grep -v "labelspace -1"|cut -c 17-37 |head -1`
echo Deleting: mpls labelspace set $output -1
mpls labelspace set $output -1
i=`expr $i+1`
done
echo Deleting all mpls - ilm settings
nr_of_lines=`mpls ilm show |grep ILM |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`mpls ilm show |grep ILM |cut -c 10-37 |head -1`
echo Deleting: mpls ilm del $output
mpls ilm del $output
i=`expr $i+1`
done
var1=`tc qdisc show |grep eth0 |grep htb`
if [ ! -z "$var1" ]; then
tc qdisc del dev eth0 root
echo "tc clear eth0"
fi
var2=`tc qdisc show |grep eth3 |grep htb`
if [ ! -z "$var2" ]; then
tc qdisc del dev eth3 root
echo "tc clear eth3"
fi
var3=`tc qdisc show |grep eth1 |grep htb`
if [ ! -z "$var3" ]; then
tc qdisc del dev eth1 root
echo "tc clear eth1"
fi
var4=`tc qdisc show |grep eth2 |grep htb`
if [ ! -z "$var4" ]; then
tc qdisc del dev eth2 root
echo "tc clear eth2"
fi
openair3/EXAMPLES/3Nodes_EMULATION/mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Script by Lamia Romdhani
#June 2008
echo Setting MPLS
sudo modprobe mpls6
echo Number of params = $#
if [ $# -eq 3 ]; then
LABEL_IN=$1
IP_NEXT_HOP=$2
LABEL_OUT=$3
echo "IP Next Hop is $IP_NEXT_HOP"
echo 'Starting mpls'
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
sudo mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
else
echo usage: mpls_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
fi
openair3/EXAMPLES/3Nodes_EMULATION/mr1_conf_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR1_DIR
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
#echo Launching AS and RF
#./start_openair.sh 8 8
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
#sudo ifconfig eth2 10.0.1.3
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.3
sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
echo Classification rules for MR1 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
echo Classification rules for MR1 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN1_MR1_CH1_MN3 -m $MN3_CH1_MR1_MN1 -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 4
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
#echo Multicast state launched with config_mr1
#xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr1 &
#xterm -hold -e ./mac_sim -m0 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top &
openair3/EXAMPLES/3Nodes_EMULATION/mr1_mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
source params.sh
sudo modprobe mpls6
echo Setting MPLS for mr1
echo "0" > /sys/mpls/debug
# MN1 <-> MN3
echo 'MN3->MN1'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $MN3_CH1_MR1_MN1 labelspace 0 proto ipv6
echo 'MN1->MN3'
var=`mpls nhlfe add key 0 instructions push gen $MN1_MR1_CH1_MN3 nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
echo "Creating routes from MN1 to MN3"
sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
sudo ip -6 route add $MN1_IN6_ADDR/128 dev eth2
# MN1 <-> MN2
echo 'MN2->MN1'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $MR1_LABEL_IN labelspace 0 proto ipv6
echo 'MN1->MN2'
var=`mpls nhlfe add key 0 instructions push gen $MR1_LABEL_OUT nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
echo "Creating routes from MN1 to MN2"
sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
openair3/EXAMPLES/3Nodes_EMULATION/mr1_nas.sh deleted 100755 → 0
View file @ e179ab0e
#Phil, Lamia 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr1_conf_nas.sh
./mr1_mpls_nas.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth2
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
#watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
xterm -hold -e "cd /homes/foubert/Openair/openair2/SIMULATION/USER_TOOLS/LAYER2_SIM ; ./mac_sim -m1 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top"
#./stop_rf.sh
sleep 2
./del_mpls.sh
#sleep 2
#./del_mpls.sh
openair3/EXAMPLES/3Nodes_EMULATION/mr2_conf_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
#echo Launching AS and RF
#./start_openair.sh 8 9
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.4
#sudo ifconfig eth3 10.0.3.3
sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
# Com between MR2 <-> CH1
echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
echo Classification rules for MR2- Cluster 1 - MPLS PMIP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH1_MR2_CH2_LABEL_IN -m $CH1_MR2_CH2_LABEL_OUT -r 5
echo Classification rules for MR2- Cluster 1 - MPLS for com between MN3 and MN1
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN3_MR2_CH1_MN1 -m $MN1_CH1_MR2_MN3 -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 4
# Com between MR2 <-> CH2
#echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
#echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
#echo Classification rules for MR2- Cluster 2 - MPLS PMIP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -l $CH2_MR2_CH1_LABEL_IN -m $CH2_MR2_CH1_LABEL_OUT -r 13
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -l $MN3_MR2_CH2_MN2 -m $MN2_CH2_MR2_MN3 -r 13
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c32 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c33 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 12
#echo Multicast state launched with config_mr2
#xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mesh &
#xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mn3 &
#xterm -hold -e ./mac_sim -m0 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top &
openair3/EXAMPLES/3Nodes_EMULATION/mr2_conf_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Launching AS and RF
./start_openair.sh 5 9
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.4
sudo ifconfig eth0 10.0.3.3
sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
# Com between MR2 <-> CH1
echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
echo Classification rules for MR2- Cluster 1 - MPLS PMIP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH1_MR2_CH2_LABEL_IN -m $CH1_MR2_CH2_LABEL_OUT -r 5
echo Classification rules for MR2- Cluster 1 - MPLS for com between MN3 and MN1
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN3_MR2_CH1_MN1 -m $MN1_CH1_MR2_MN3 -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 4
# Com between MR2 <-> CH2
#echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
#echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
#echo Classification rules for MR2- Cluster 2 - MPLS PMIP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -l $CH2_MR2_CH1_LABEL_IN -m $CH2_MR2_CH1_LABEL_OUT -r 13
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -l $MN3_MR2_CH2_MN2 -m $MN2_CH2_MR2_MN3 -r 13
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c32 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c33 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 12
echo Multicast state launched with config_mr2
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mesh &
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mn3 &
openair3/EXAMPLES/3Nodes_EMULATION/mr2_mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
# Author: Lamia Romdhani
#June 2008
source params.sh
sudo modprobe mpls6
echo Starting routing ...
echo No MPLS debug
echo "0" >/sys/mpls/debug
#MN1->MN2
./mpls_nas.sh $MR2_CH1_LABEL_IN $CH2_IN6_ADDR $MR2_CH2_LABEL_OUT
#MN2->MN1
./mpls_nas.sh $MR2_CH2_LABEL_IN $CH1_IN6_ADDR $MR2_CH1_LABEL_OUT
#CH1->CH2
./mpls_nas.sh $CH1_MR2_CH2_LABEL_OUT $CH2_IN6_ADDR $CH2_MR2_CH1_LABEL_IN
#CH2->CH1
./mpls_nas.sh $CH2_MR2_CH1_LABEL_OUT $CH1_IN6_ADDR $CH1_MR2_CH2_LABEL_IN
#MN3->MN1
var=`mpls nhlfe add key 0 instructions push gen $MN3_MR2_CH1_MN1 nexthop nasmesh0 ipv6 $CH1_IN6_ADDR |grep key | cut -c 17-26`
sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
sudo ip -6 route add $MN3_IN6_ADDR/128 dev eth3
#MN1->MN3
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $MN1_CH1_MR2_MN3 labelspace 0 proto ipv6
#MN3->MN2
var=`mpls nhlfe add key 0 instructions push gen $MN3_MR2_CH2_MN2 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
#MN2->MN3
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $MN2_CH2_MR2_MN3 labelspace 0 proto ipv6
openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Lamia, Philippe huu nghia, 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr2_conf_nas.sh
./mr2_mpls_nas.sh
sudo sysctl -w net.ipv6.conf.eth3.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth3 promisc
sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth3
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
#watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
xterm -hold -e "cd /homes/foubert/Openair/openair2/SIMULATION/USER_TOOLS/LAYER2_SIM ; ./mac_sim -m2 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_3nodes.top"
#./stop_rf.sh
sleep 2
./del_mpls.sh
#sleep 2
#./del_mpls.sh
openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Lamia, Philippe huu nghia, 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr2_conf_nas_barca_outdoor.sh
./mr2_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Lamia, Philippe huu nghia, 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr2_conf_nas_barca_parking.sh
./mr2_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/3Nodes_EMULATION/mr2_nas_barca_parking_NOPMIP.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Lamia, Philippe huu nghia, 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr2_conf_nas_barca_parking.sh
./mr2_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/3Nodes_EMULATION/mr3_conf_nas_barca.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR1_DIR
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Launching AS and RF
./start_openair.sh 1 10
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.5
sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
echo Classification rules for MR3 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 4
echo Classification rules for MR3 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 5
echo EADS Multicast for MR3
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Multicast state launched with config_mr3
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
openair3/EXAMPLES/3Nodes_EMULATION/mr3_conf_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR1_DIR
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Launching AS and RF
./start_openair.sh 8 10
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
sudo ifconfig eth0 10.0.2.5
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.5
sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
echo Classification rules for MR3 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 4
echo Classification rules for MR3 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 5
echo EADS Multicast for MR3
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Multicast state launched with config_mr3
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
openair3/EXAMPLES/3Nodes_EMULATION/mr3_conf_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR1_DIR
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Launching AS and RF
./start_openair.sh 6 10
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
sudo ifconfig eth0 10.0.2.5
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.5
sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
echo Classification rules for MR3 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 12
echo Classification rules for MR3 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 13
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 13
echo EADS Multicast for MR3
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Multicast state launched with config_mr3
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
openair3/EXAMPLES/3Nodes_EMULATION/mr3_mpls_barca.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
source params.sh
sudo modprobe mpls6
echo Setting MPLS for mr3
echo "0" > /sys/mpls/debug
echo 'MN1->MN2'
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
echo 'MN2->MN1'
var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
sudo ip -6 route add $MN2_IN6_ADDR/128 dev $ETH_MR3
echo 'MN3->MN2'
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $MN3_CH2_MR3_MN2 labelspace 0 proto ipv6
echo 'MN2->MN3'
var=`mpls nhlfe add key 0 instructions push gen $MN2_MR3_CH2_MN3 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
openair3/EXAMPLES/3Nodes_EMULATION/mr3_mpls_nas_barca.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
source params.sh
sudo modprobe mpls6
echo Setting MPLS for mr3
echo "0" > /sys/mpls/debug
echo 'MN1->MN2'
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
echo 'MN2->MN1'
var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
sudo ip -6 route add $MN2_IN6_ADDR/128 dev $ETH_MR3
echo 'MN3->MN2'
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $MN3_CH2_MR3_MN2 labelspace 0 proto ipv6
echo 'MN2->MN3'
var=`mpls nhlfe add key 0 instructions push gen $MN2_MR3_CH2_MN3 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
openair3/EXAMPLES/3Nodes_EMULATION/mr3_nas_barca.sh deleted 100755 → 0
View file @ e179ab0e
#Phil, Lamia 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr3_conf_nas_barca.sh
./mr3_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/3Nodes_EMULATION/mr3_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#Phil, Lamia 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr3_conf_nas_barca_outdoor.sh
./mr3_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/3Nodes_EMULATION/mr3_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#Phil, Lamia 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr3_conf_nas_barca_parking.sh
./mr3_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/3Nodes_EMULATION/params.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
MR1_IN_ADDR=10.0.1.3
MR1_IN6_ADDR=2001:10:0:1:7856:3412:0:2
MR1_EG_ADDR=192.168.9.1
MR1_EG6_ADDR=2001:660:5502::100
# Flow CH1->MR1
MR1_LABEL_IN=1001
# Flow MR1->CH1
MR1_LABEL_OUT=1000
ETH_MR1=eth0
MR2_IN_ADDR=10.0.1.4
MR2_IN6_ADDR1=2001:10:0:1:7856:3412:0:3
MR2_IN6_ADDR2=2001:10:0:2:7856:3412:0:3
MR2_EG6_ADDR=2001:660:5502::300
ETH_MR2=eth0
# Flow CH1->MR2
MR2_CH1_LABEL_IN=2000
# Flow MR2->CH1
MR2_CH1_LABEL_OUT=2001
# Flow CH2->MR2
MR2_CH2_LABEL_IN=3001
# Flow MR2->CH2
MR2_CH2_LABEL_OUT=3000
MR3_IN_ADDR=10.0.1.5
MR3_IN6_ADDR=2001:10:0:2:7856:3412:0:2
MR3_EG_ADDR=192.168.10.1
MR3_EG6_ADDR=2001:660:5502::200
# Flow CH2->MR3
MR3_LABEL_IN=4000
# Flow MR3->CH2
MR3_LABEL_OUT=4001
ETH_MR3=eth2
CH1_IN_ADDR=10.0.1.1
CH2_IN_ADDR=10.0.1.2
CH1_IN6_ADDR=2001:10:0:1:7856:3412:0:1
CH2_IN6_ADDR=2001:10:0:2:7856:3412:0:1
## Communication between the CHs
CH1_MR2_CH2_LABEL_IN=8001
CH1_MR2_CH2_LABEL_OUT=8000
CH2_MR2_CH1_LABEL_IN=9001
CH2_MR2_CH1_LABEL_OUT=9000
## Com between MN1 and MN3
MN1_MR1_CH1_MN3=1500
MN3_CH1_MR1_MN1=1501
MN1_CH1_MR2_MN3=2500
MN3_MR2_CH1_MN1=2501
## Com between MN2 and MN3
MN3_MR2_CH2_MN2=3500
MN2_CH2_MR2_MN3=3501
MN3_CH2_MR3_MN2=4500
MN2_MR3_CH2_MN3=4501
#MN1_IN6_ADDR=2001:660:5502::20
#MN2_IN6_ADDR=2001:660:5502::25
#MN1_IN6_ADDR=2001:660:5502::110
MN1_IN6_ADDR=2001:660:5502:0:211:43ff:fe74:77bb
MN1_IN_ADDR=192.168.9.2
MN2_IN6_ADDR=2001:660:5502::210
#MN3_IN6_ADDR=2001:660:5502::310
#MN3_IN6_ADDR=2001:660:5502:0:240:8cff:fe77:9b79
MN3_IN6_ADDR=2001:660:5502:0:218:8bff:feb0:50aa
MN2_IN_ADDR=192.168.10.2
# Put the right OPENAIR3 path here
OPENAIR3_HOME=~/Openair/openair3
OPENAIR3_PMIP6D_PATH=$OPENAIR3_HOME/pmip6d
OPENAIR3_SCRIPTS_PATH=$OPENAIR3_HOME/scripts
REFLECTOR_DIR=$OPENAIR3_HOME/EXAMPLES/BARCA_TRIALS/REFLECTOR
# Put the right OPENAIR2 path here
#OPENAIR2_DIR=~/openair2_r234/openair2/
OPENAIR2_DIR=~/Openair/openair2
openair3/EXAMPLES/3Nodes_EMULATION/start_openair.sh deleted 100755 → 0
View file @ e179ab0e
if [ "$1" == "" ]; then
echo "Please provide a TX power level (0-8)"
exit
fi
if [ "$2" == "" ]; then
echo "Please provide a Node ID (0-7 for CH, 8-15 for MR/UE)"
exit
fi
if [ "$OPENAIR1_DIR" == "" ] ; then
echo "Please set OPENAIR1_DIR environment variable"
exit
else
echo "OPENAIR1_DIR Set to $OPENAIR1_DIR"
fi
cd $OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF
source ./txgains.sh
case $1 in
0)
CBMIMO1_POWER=$CBMIMO1_m20_dBm
echo "Configuring CBMIMO1 for -20dBm ($CBMIMO1_POWER)"
;;
1)
CBMIMO1_POWER=$CBMIMO1_m15_dBm
echo Configuring CBMIMO1 for -15dBm
;;
2)
CBMIMO1_POWER=$CBMIMO1_m10_dBm
echo Configuring CBMIMO1 for -10dBm
;;
3)
CBMIMO1_POWER=$CBMIMO1_m5_dBm
echo Configuring CBMIMO1 for -5dBm
;;
4)
CBMIMO1_POWER=$CBMIMO1_0_dBm
echo Configuring CBMIMO1 for 0dBm
;;
5)
CBMIMO1_POWER=$CBMIMO1_5_dBm
echo Configuring CBMIMO1 for 5dBm
;;
6)
CBMIMO1_POWER=$CBMIMO1_10_dBm
echo Configuring CBMIMO1 for 10dBm
;;
7)
CBMIMO1_POWER=$CBMIMO1_15_dBm
echo Configuring CBMIMO1 for 15dBm
;;
8)
CBMIMO1_POWER=$CBMIMO1_20_dBm
echo Configuring CBMIMO1 for 20dBm
;;
*)
echo Invalid TX power
exit
esac
echo Removing openair_rf,openair_l2 and openair_rrc modules
sudo rmmod -f openair_rrc
sudo rmmod -f openair_l2
sudo rmmod -f openair_rf
sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_l2.ko
OARF_RET=`lsmod | grep -e openair_rf`
if [ "$OARF_RET" = "" ]; then
echo Error loading openair1 module
exit
fi
sudo insmod $OPENAIR2_DIR/LAYER2/openair_layer2.ko
OA2_RET=`lsmod | grep -e openair_l2`
if [ "$OA2_RET" = "" ]; then
echo Error loading openair2 module
exit
fi
sudo insmod $OPENAIR2_DIR/RRC/MESH/openair_RRC.ko
OARRC_RET=`lsmod | grep -e openair_rrc`
if [ "$OARRC_RET" = "" ]; then
echo Error loading openair RRC module
exit
fi
OA_DEV="/dev/openair0"
if [ -c "$OA_DEV" ]; then
echo "$OA_DEV exists"
else
echo "creating $OA_DEV"
sudo mknod $OA_DEV c 127 0
sudo chmod a+rw /dev/openair0
fi
./openair_rf_cbmimo1 1 0
./openair_rf_cbmimo1 1 6 $CBMIMO1_POWER
if [ $2 -lt "8" ]; then
./openair_rf_cbmimo1 1 1 1 $2
elif [ $2 -lt "16" ]; then
./openair_rf_cbmimo1 1 3 1 $2
else
echo Illegal Node ID, exiting
exit
fi
sleep 1
# Watch the status of the radio to check for hardware exit event
#OA1_STATE=`cat /proc/openair1/openair1_state`
#while [ "$OA1_STATE" != "EXITED" ]; do
# OA1_STATE=`cat /proc/openair1/openair1_state`
# sleep .5
#done
#./openair_rf_cbmimo1 1 4 1
#echo CBMIMO1 Hardware exit, restarting ...
openair3/EXAMPLES/3Nodes_EMULATION/stop_rf.sh deleted 100755 → 0
View file @ e179ab0e
cd $OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF
echo STOP STARTS...
./openair_rf_cbmimo1 1 4 1
sleep 2
echo STOP RF DONE
sudo killall chbch_scope
echo STOP CHBCH SCOPE DONE
sudo killall sach_scope
echo STOP_SACH SCOPE DONE
sleep 1
sudo rmmod nasmesh
sleep 1
echo REMOVE NASMESH MODULE DONE
sudo rmmod openair_rrc
sleep 1
echo REMOVE RRC MODULE DONE
sudo rmmod openair_l2
sleep 1
echo REMOVE LAYER2 MODULE DONE
sudo rmmod openair_rf
echo REMOVE RF MODULE DONE
echo STOP FINISHED SUCCESSFULLY
openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_ch1 deleted 100755 → 0
View file @ e179ab0e
# Configuration file of CH1 (SP4-Wimaxhead1)
# side linked to MR1 (Chorist Edge 1) : name of interface, IPv4, TTL
int_1=nasmesh0
ipv_1=4
ttl_1=65
# side linked to MR2 (SP4-Wimaxrelay-2) : name of interface, IPv4, TTL
int_2=nasmesh0
ipv_2=4
ttl_2=65
#multicast group label on side 1 then group label on side 2
groupes=226.30.10.10,226.40.10.10
groupes=226.30.10.11,226.40.10.11
groupes=226.30.10.12,226.40.10.12
groupes=226.30.10.13,226.40.10.13
groupes=226.30.10.14,226.40.10.14
groupes=226.30.10.15,226.40.10.15
#Port ranges
ports=1234,1234
ports=6300,6308
ports=6340,6348
ports=6360,6368
openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_ch2 deleted 100755 → 0
View file @ e179ab0e
# Configuration file of CH1 (SP4-Wimaxhead2)
# side linked to MR2 (SP4-Wimaxrelay-2) : name of interface, IPv4, TTL
int_1=nasmesh0
ipv_1=4
ttl_1=65
# side linked to MR3 (SP4-Edge2) : name of interface, IPv4, TTL
int_2=nasmesh0
ipv_2=4
ttl_2=65
#multicast group label on side 1 then group label on side 2
groupes=226.50.10.10,226.30.10.10
groupes=226.50.10.11,226.30.10.11
groupes=226.50.10.12,226.30.10.12
groupes=226.50.10.13,226.30.10.13
groupes=226.50.10.14,226.30.10.14
groupes=226.50.10.15,226.30.10.15
#Port ranges
ports=1234,1234
ports=6300,6308
ports=6340,6348
ports=6360,6368
openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mn1 deleted 100755 → 0
View file @ e179ab0e
# Configuration file of MN1 (Dieppe)
# side linked to EADS End-users (Wifi side) : name of interface, IPv4, TTL
int_1=wifi0
ipv_1=4
ttl_1=65
# side linked to MR1 (CHORIST-Edge1): name of interface, IPv4, TTL
int_2=eth0
ipv_2=4
ttl_2=65
#multicast group label on side 1 then group label on side 2
groupes=224.0.55.55,224.0.66.66
groupes=226.10.10.10,226.20.10.10
groupes=226.10.10.11,226.20.10.11
groupes=226.10.10.12,226.20.10.12
groupes=226.10.10.13,226.20.10.13
groupes=226.10.10.14,226.20.10.14
groupes=226.10.10.15,226.20.10.15
#Port ranges
ports=1234,1234
ports=6300,6308
ports=6340,6348
ports=6360,6368
openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mn2 deleted 100755 → 0
View file @ e179ab0e
# Configuration file of MN2 (Sarlat)
# side linked to MR3 (CHORIST-Edge2) : name of interface, IPv4, TTL
int_2=eth0
ipv_2=4
ttl_2=65
# side linked to EADS End-users (Wifi side) : name of interface, IPv4, TTL
int_1=wifi0
ipv_1=4
ttl_1=65
#multicast group label on side 1 then group label on side 2
groupes=226.20.10.10,226.10.10.10
groupes=226.20.10.11,226.10.10.11
groupes=226.20.10.12,226.10.10.12
groupes=226.20.10.13,226.10.10.13
groupes=226.20.10.14,226.10.10.14
groupes=226.20.10.15,226.10.10.15
#Port ranges
ports=1234,1234
ports=6300,6308
ports=6340,6348
ports=6360,6368
openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mr1 deleted 100755 → 0
View file @ e179ab0e
# Configuration file MR1 (Chorist-Edge1)
# side linked to MN1 (DIEPPE) : name of interface, IPv4, TTL
int_1=eth0
ipv_1=4
ttl_1=65
# side linked to CH1 (SP4-Wimaxhead1) : name of interface, IPv4, TTL
int_2=nasmesh0
ipv_2=4
ttl_2=65
#multicast group label on side 1 then group label on side 2
groupes=226.20.10.10,226.30.10.10
groupes=226.20.10.11,226.30.10.11
groupes=226.20.10.12,226.30.10.12
groupes=226.20.10.13,226.30.10.13
groupes=226.20.10.14,226.30.10.14
groupes=226.20.10.15,226.30.10.15
# different port ranges
ports=1234,1234
ports=6300,6308
ports=6340,6348
ports=6360,6368
openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mr2 deleted 100755 → 0
View file @ e179ab0e
# Configuration file MR2 (SP4-Wimaxrelay-2)
# side linked to CH1 (SP4-Wimaxhead1) : name of interface, IPv4, TTL
int_1=nasmesh0
ipv_1=4
ttl_1=65
# side linked to CH1 (SP4-Wimaxhead2) : name of interface, IPv4, TTL
int_2=nasmesh0
ipv_2=4
ttl_2=65
#multicast group label on side 1 then group label on side 2
groupes=226.40.10.10,226.50.10.10
groupes=226.40.10.11,226.50.10.11
groupes=226.40.10.12,226.50.10.12
groupes=226.40.10.13,226.50.10.13
groupes=226.40.10.14,226.50.10.14
groupes=226.40.10.15,226.50.10.15
# different port ranges
ports=1234,1234
ports=6300,6308
ports=6340,6348
ports=6360,6368
openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/config_mr3 deleted 100755 → 0
View file @ e179ab0e
# Configuration file MR3 (Chorist-Edge2)
# side linked to CH2 (SP4-Wimaxhead2) : name of interface, IPv4, TTL
int_1=nasmesh0
ipv_1=4
ttl_1=65
# side linked to MN2 (SARLAT) : name of interface, IPv4, TTL
int_2=eth0
ipv_2=4
ttl_2=65
#multicast group label on side 1 then group label on side 2
groupes=226.30.10.10,226.20.10.10
groupes=226.30.10.11,226.20.10.11
groupes=226.30.10.12,226.20.10.12
groupes=226.30.10.13,226.20.10.13
groupes=226.30.10.14,226.20.10.14
groupes=226.30.10.15,226.20.10.15
# different port ranges
ports=1234,1234
ports=6300,6308
ports=6340,6348
ports=6360,6368
openair3/EXAMPLES/BARCA_TRIALS/REFLECTOR/reflector_launch.pl deleted 100755 → 0
View file @ e179ab0e
#!/usr/bin/perl -w
use Switch;
$dir = $ARGV[0];
$file = $ARGV[1];
$nb_groupes = `grep groupes $ARGV[0]|wc -l|sed \'s/ //g\'`;
$nb_plages = `grep port $ARGV[0]|wc -l|sed \'s/ //g\'`;
chomp($nb_plages);
chomp($nb_groupes);
#les structures dans lesquelles on stocke les données
@groupes=();
@ports=();
@int_1=();
@int_2=();
@ipv_1=();
@ipv_2=();
@ttl_1=();
@ttl_2=();
#on compte le nombre de lignes, pour signaler l'erreur
$num_ligne = 0;
open(fFile, "< $file") or die "cannot open file $file";
while($line = <fFile>){
$num_ligne++;
#on ignore les lignes commentées ou vides
if ((substr ($line,0,1) ne "#") && ($line =~ /=/)) {
@ligne=split("=", $line);
#si l'argument est vide, alors le programme sort avec une erreur
chomp($ligne[1]);
if(!length($ligne[1])){
printf "Erreur dans le fichier de conf à la ligne $num_ligne.\n";
exit;
}
#on met les données dans les structures adéquates
switch ($ligne[0]){
case "int_1" {push(@int_1,$ligne[1])}
case "int_2" {push(@int_2,$ligne[1])}
case "ipv_1" {push(@ipv_1,$ligne[1])}
case "ipv_2" {push(@ipv_2,$ligne[1])}
case "ttl_1" {push(@ttl_1,$ligne[1])}
case "ttl_2" {push(@ttl_2,$ligne[1])}
case "groupes" {push(@groupes,$ligne[1])}
case "ports" {push(@ports,$ligne[1])}
}
}
}
close(fFile);
#On construit la commande et on l'affiche
$commande = "$dir/reflector $int_1[0] $int_2[0] $ipv_1[0] $ipv_2[0] $ttl_1[0] $ttl_2[0]";
#on rajoute le nb de groupes et les groupes
$commande = $commande." ".@groupes;
foreach $groupe (@groupes){
@couple = split (",", $groupe);
$commande = $commande." $couple[0] $couple[1]";
}
#on rajoute le nb de ports et les ports
$commande = $commande." ".@ports;
foreach $port (@ports){
@couple = split (",", $port);
$commande = $commande." $couple[0] $couple[1]";
}
$commande = $commande."\n";
system($commande);
openair3/EXAMPLES/BARCA_TRIALS/ch1_conf_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
echo Clusterhead address is $CH1_IN6_ADDR
echo Launching AS and RF
./start_openair.sh 8 0
# Installing NASMESH driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
echo Classification rules for CH
#CH1<-> MR1 IP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_IN6_ADDR -y $MR1_IN6_ADDR -r 12
#CH1<-> MR1 MPLS user-plane bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
## Est ce bon ?
#CH1<->MR1 - For com between MN1 and MN3 - MPLS user-plane bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MN3_CH1_MR1_MN1 -m $MN1_MR1_CH1_MN3 -r 13
#CH1<-> MR1 multicast (rajout THC)
echo EADS Multicast for CH1
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 12
#CH1<-> MR2 (IP Signaling)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x $CH1_IN6_ADDR -y $MR2_IN6_ADDR1 -r 20
#CH1<-> MR2 (MPLS user-plane bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -l $MR2_CH1_LABEL_IN -m $MR2_CH1_LABEL_OUT -r 21
#CH1<-> MR2 (MPLS PMIP signaling bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -l $CH1_MR2_CH2_LABEL_OUT -m $CH1_MR2_CH2_LABEL_IN -r 21
#CH1<-> MR2 - For com between MN1 and MN3 - (MPLS signaling bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MN1_CH1_MR2_MN3 -m $MN3_MR2_CH1_MN1 -r 21
#CH1<-> MR2 multicast EADS (rajout THC)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 20
#CH Broadcast (transmission of Router ADV)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -x $CH1_IN6_ADDR -y ff02::1 -r 3
#CH<-> MR1 Imulticast
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x ff3e:30:2001:660:5502:ffff:e000:3737 -y $MR1_IN_ADDR -r 14
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.2 -t 224.0.55.55 -r 12
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.1 -t 224.0.55.55 -r 12
#CH<-> MR2 (IP Signaling)
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH_ADDR -y $MR2_IN_ADDR -r 20
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.1 -t 224.0.66.66 -r 20
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.3 -t 224.0.66.66 -r 20
#CH<-> MR2 (MPLS user-plane bearer)
# Bring up openair NASMESH device and set IPv6 address
sudo ifconfig nasmesh0 up
sudo ip addr add 10.0.0.1/24 dev nasmesh0
sudo ip -6 addr add $CH1_IN6_ADDR/64 dev nasmesh0
echo No MPLS debug
echo "0" > /sys/mpls/debug
echo Multicast state launched with config_ch1
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_ch1 &
openair3/EXAMPLES/BARCA_TRIALS/ch1_conf_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
echo Clusterhead address is $CH1_IN6_ADDR
echo Launching AS and RF
./start_openair.sh 6 0
# Installing NASMESH driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
echo Classification rules for CH
#CH1<-> MR1 IP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_IN6_ADDR -y $MR1_IN6_ADDR -r 12
#CH1<-> MR1 MPLS user-plane bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
## Est ce bon ?
#CH1<->MR1 - For com between MN1 and MN3 - MPLS user-plane bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MN3_CH1_MR1_MN1 -m $MN1_MR1_CH1_MN3 -r 13
#CH1<-> MR1 multicast (rajout THC)
echo EADS Multicast for CH1
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 12
#CH1<-> MR2 (IP Signaling)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x $CH1_IN6_ADDR -y $MR2_IN6_ADDR1 -r 20
#CH1<-> MR2 (MPLS user-plane bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -l $MR2_CH1_LABEL_IN -m $MR2_CH1_LABEL_OUT -r 21
#CH1<-> MR2 (MPLS PMIP signaling bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -l $CH1_MR2_CH2_LABEL_OUT -m $CH1_MR2_CH2_LABEL_IN -r 21
#CH1<-> MR2 - For com between MN1 and MN3 - (MPLS signaling bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MN1_CH1_MR2_MN3 -m $MN3_MR2_CH1_MN1 -r 21
#CH1<-> MR2 multicast EADS (rajout THC)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 20
#CH Broadcast (transmission of Router ADV)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -x $CH1_IN6_ADDR -y ff02::1 -r 3
#CH<-> MR1 Imulticast
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x ff3e:30:2001:660:5502:ffff:e000:3737 -y $MR1_IN_ADDR -r 14
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.2 -t 224.0.55.55 -r 12
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -s 10.0.0.1 -t 224.0.55.55 -r 12
#CH<-> MR2 (IP Signaling)
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH_ADDR -y $MR2_IN_ADDR -r 20
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.1 -t 224.0.66.66 -r 20
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -s 10.0.0.3 -t 224.0.66.66 -r 20
#CH<-> MR2 (MPLS user-plane bearer)
# Bring up openair NASMESH device and set IPv6 address
sudo ifconfig nasmesh0 up
sudo ip addr add 10.0.0.1/24 dev nasmesh0
sudo ip -6 addr add $CH1_IN6_ADDR/64 dev nasmesh0
echo No MPLS debug
echo "0" > /sys/mpls/debug
echo Multicast state launched with config_ch1
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_ch1 &
openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sudo ./ch1_conf_nas_barca_outdoor.sh
# MN1 -> MN2
sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
# MN2 -> MN1
sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
# MN1 -> MN3
sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
# MN3 -> MN1
sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
# CH1 -> CH2
#echo 'CH2->MR2->CH1'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
#echo 'CH1->MR2->CH2'
var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
echo 0 > /sys/mpls/debug
# PMIP
echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
watch -n .1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_outdoor_nopmip.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sudo ./ch1_conf_nas_barca_outdoor.sh
# MN1 -> MN2
sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
# MN2 -> MN1
sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
# MN1 -> MN3
sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
# MN3 -> MN1
sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
# CH1 -> CH2
#echo 'CH2->MR2->CH1'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
#echo 'CH1->MR2->CH2'
var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
echo 0 > /sys/mpls/debug
# PMIP
echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
watch -n .1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sudo ./ch1_conf_nas_barca_parking.sh
# MN1 -> MN2
sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
# MN2 -> MN1
sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
# MN1 -> MN3
sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
# MN3 -> MN1
sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
# CH1 -> CH2
#echo 'CH2->MR2->CH1'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
#echo 'CH1->MR2->CH2'
var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
echo 0 > /sys/mpls/debug
# PMIP
echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
watch -n .5 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/ch1_nas_barca_parking_no_pmip.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sudo ./ch1_conf_nas_barca_parking.sh
# MN1 -> MN2
sudo ./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
# MN2 -> MN1
sudo ./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
# MN1 -> MN3
sudo ./mpls_nas.sh $MN1_MR1_CH1_MN3 $MR2_IN6_ADDR1 $MN1_CH1_MR2_MN3
# MN3 -> MN1
sudo ./mpls_nas.sh $MN3_MR2_CH1_MN1 $MR1_IN6_ADDR $MN3_CH1_MR1_MN1
# CH1 -> CH2
#echo 'CH2->MR2->CH1'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $CH1_MR2_CH2_LABEL_IN labelspace 0 proto ipv6
#echo 'CH1->MR2->CH2'
var=`mpls nhlfe add key 0 instructions push gen $CH1_MR2_CH2_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR1 | grep key |cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $CH2_IN6_ADDR/128 via $MR2_IN6_ADDR1 mpls $var
echo 0 > /sys/mpls/debug
# PMIP
#echo /openair3/pmip6d/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR
#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -c -L $CH1_IN6_ADDR -A $CH2_IN6_ADDR" &
watch -n .5 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/ch2_conf_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
echo ClusterHead address is $CH2_IN6_ADDR
echo Launching AS and RF
./start_openair.sh 8 1
# Installing NASMESH driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
echo Classification rules for CH2
#CH2 Broadcast (transmission of Router ADV)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_IN6_ADDR -y ff02::1 -r 3
#CH2<-> MR2 IP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_IN6_ADDR -y $MR2_IN6_ADDR2 -r 20
#CH<-> MR1 MPLS user-plane bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH2_LABEL_IN -m $MR2_CH2_LABEL_OUT -r 21
#CH2<-> MR2 MPLS PMIP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH2_MR2_CH1_LABEL_OUT -m $CH2_MR2_CH1_LABEL_IN -r 21
#CH2<-> MR2 MPLS Signaling - For com between MN3 and MN2
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN2_CH2_MR2_MN3 -m $MN3_MR2_CH2_MN2 -r 21
#CH2<-> MR2 Imulticast
echo EADS Multicast for MR2
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 20
#CH2<-> MR3 (IP Signaling)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x $CH2_IN6_ADDR -y $MR3_IN6_ADDR -r 28
#CH2<-> MR3 (MPLS user-plane bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MR3_LABEL_IN -m $MR3_LABEL_OUT -r 29
#CH2<-> MR3 (MPLS for com between MN2 and MN3)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MN3_CH2_MR3_MN2 -m $MN2_MR3_CH2_MN3 -r 29
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 28
# Bring up openair NASMESH device and set IPv6 address
sudo ifconfig nasmesh0 up
sudo ip addr add 10.0.0.2/24 dev nasmesh0
sudo ip -6 addr add $CH2_IN6_ADDR/64 dev nasmesh0
echo No MPLS debug
echo "0" >/sys/mpls/debug
echo Multicast state launched with config_ch2
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_ch2 &
openair3/EXAMPLES/BARCA_TRIALS/ch2_conf_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
echo ClusterHead address is $CH2_IN6_ADDR
echo Launching AS and RF
./start_openair.sh 8 1
# Installing NASMESH driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
echo Classification rules for CH2
#CH2 Broadcast (transmission of Router ADV)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_IN6_ADDR -y ff02::1 -r 3
#CH2<-> MR2 IP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_IN6_ADDR -y $MR2_IN6_ADDR2 -r 20
#CH<-> MR1 MPLS user-plane bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH2_LABEL_IN -m $MR2_CH2_LABEL_OUT -r 21
#CH2<-> MR2 MPLS PMIP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH2_MR2_CH1_LABEL_OUT -m $CH2_MR2_CH1_LABEL_IN -r 21
#CH2<-> MR2 MPLS Signaling - For com between MN3 and MN2
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN2_CH2_MR2_MN3 -m $MN3_MR2_CH2_MN2 -r 21
#CH2<-> MR2 Imulticast
echo EADS Multicast for MR2
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 20
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 20
#CH2<-> MR3 (IP Signaling)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x $CH2_IN6_ADDR -y $MR3_IN6_ADDR -r 28
#CH2<-> MR3 (MPLS user-plane bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -l $MR3_LABEL_IN -m $MR3_LABEL_OUT -r 29
#CH2<-> MR3 (MPLS for com between MN2 and MN3)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MN3_CH2_MR3_MN2 -m $MN2_MR3_CH2_MN3 -r 29
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 28
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 28
# Bring up openair NASMESH device and set IPv6 address
sudo ifconfig nasmesh0 up
sudo ip addr add 10.0.0.2/24 dev nasmesh0
sudo ip -6 addr add $CH2_IN6_ADDR/64 dev nasmesh0
echo No MPLS debug
echo "0" >/sys/mpls/debug
echo Multicast state launched with config_ch2
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_ch2 &
openair3/EXAMPLES/BARCA_TRIALS/ch2_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#CH2_NAS.SH
#Cluster Head (2)– with NAS_MPLS_PMIP working
#Phil, 25 july 08
source params.sh
./ch2_conf_nas_barca_outdoor.sh
#MN1->MN2
./mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN6_ADDR $MR3_LABEL_IN
#MN2->MN1
./mpls_nas.sh $MR3_LABEL_OUT $MR2_IN6_ADDR2 $MR2_CH2_LABEL_IN
#CH1->MR2->CH2
echo 'CH1->MR2->CH2'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $CH2_MR2_CH1_LABEL_IN labelspace 0 proto ipv6
echo 'CH1->MR2->CH2'
var=`mpls nhlfe add key 0 instructions push gen $CH2_MR2_CH1_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR2 | grep key |cut -c 17-26`
echo "Creating routes from CH2 to CH1"
sudo ip -6 route add $CH1_IN6_ADDR/128 via $MR2_IN6_ADDR2 mpls $var
#MN3->MN2
./mpls_nas.sh $MN3_MR2_CH2_MN1 $MR3_IN6_ADDR $MN3_CH2_MR3_MN2
#MN2->MN3
./mpls_nas.sh $MN2_MR3_CH2_MN3 $MR2_IN6_ADDR2 $MN1_CH2_MR2_MN3
echo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR
#sudo xterm -hold -e "$OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR" &
watch -n .1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/ch2_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#CH2_NAS.SH
#Cluster Head (2)– with NAS_MPLS_PMIP working
#Phil, 25 july 08
source params.sh
./ch2_conf_nas_barca_parking.sh
echo "0" > /sys/mpls/debug
#MN1->MN2
./mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN6_ADDR $MR3_LABEL_IN
#MN2->MN1
./mpls_nas.sh $MR3_LABEL_OUT $MR2_IN6_ADDR2 $MR2_CH2_LABEL_IN
echo "0" > /sys/mpls/debug
#CH1->MR2->CH2
echo 'CH1->MR2->CH2'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $CH2_MR2_CH1_LABEL_IN labelspace 0 proto ipv6
echo 'CH1->MR2->CH2'
var=`mpls nhlfe add key 0 instructions push gen $CH2_MR2_CH1_LABEL_OUT nexthop nasmesh0 ipv6 $MR2_IN6_ADDR2 | grep key |cut -c 17-26`
echo "Creating routes from CH2 to CH1"
sudo ip -6 route add $CH1_IN6_ADDR/128 via $MR2_IN6_ADDR2 mpls $var
#MN3->MN2
./mpls_nas.sh $MN3_MR2_CH2_MN1 $MR3_IN6_ADDR $MN3_CH2_MR3_MN2
#MN2->MN3
./mpls_nas.sh $MN2_MR3_CH2_MN3 $MR2_IN6_ADDR2 $MN1_CH2_MR2_MN3
echo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR
#sudo xterm -hold -e "$OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR -A $CH1_IN6_ADDR" &
watch -n .5 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats ; cat /proc/openair1/openair1_state"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/del_mpls.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Script by Irina Dumitrascu (dumitrascu.irina@gmail.com) and Adrian Popa (adrian.popa.gh@gmail.com)
#June 2006
#Released under GPL
#Added by phil, Huu Nghia, 8 July 08
echo Deleting all mpls - xc settings
xc_output="`mpls xc show | cut -c 9-75`"
number_of_lines=`echo $xc_output|wc -l`
for i in `seq 1 $number_of_lines`
do
xc_output_line="`echo $xc_output| head -$i | tail -1`"
echo Deleting: mpls xc del $xc_output_line
mpls xc del $xc_output
#increment i
i=`expr $i+1`
done
echo Deleting all mpls - ip route settings
nr_of_lines=` ip route show |grep mpls |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`ip route show |grep mpls |head -1`
echo Deleting: ip route del $output
ip route del $output
i=`expr $i+1`
done
var1=`ip route show table 1`
if [ ! -z "$var1" ]; then
ip route del table 1
#var1=`ip route show table 1`
#ip route del $var1 table 1
ip route flush table 1
echo "clearing ip route table 1"
fi
var1=`ip route show table 2`
if [ ! -z "$var1" ]; then
ip route del table 2
# var1=`ip route show table 2`
# ip route del $var1 table 2
ip route flush table 2
echo "clearing ip route table 2"
fi
#echo Flushing iptables chains
#iptables -F
#echo Flushing iptables -t nat
#iptables -t nat -F
#echo Flushing iptables -t mangle
#iptables -t mangle -F
echo Deleting all mpls - nhlfe settings
nr_of_lines=` mpls nhlfe show |grep key |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`mpls nhlfe show |grep key |cut -c 17-26 |head -1`
echo Deleting: mpls nhlfe del key $output
mpls nhlfe del key $output
i=`expr $i+1`
done
echo Deleting all mpls - labelspace settings
nr_of_lines=`mpls labelspace show |grep -v "labelspace -1" |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`mpls labelspace show |grep -v "labelspace -1"|cut -c 17-37 |head -1`
echo Deleting: mpls labelspace set $output -1
mpls labelspace set $output -1
i=`expr $i+1`
done
echo Deleting all mpls - ilm settings
nr_of_lines=`mpls ilm show |grep ILM |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`mpls ilm show |grep ILM |cut -c 10-37 |head -1`
echo Deleting: mpls ilm del $output
mpls ilm del $output
i=`expr $i+1`
done
var1=`tc qdisc show |grep eth0 |grep htb`
if [ ! -z "$var1" ]; then
tc qdisc del dev eth0 root
echo "tc clear eth0"
fi
var2=`tc qdisc show |grep eth3 |grep htb`
if [ ! -z "$var2" ]; then
tc qdisc del dev eth3 root
echo "tc clear eth3"
fi
var3=`tc qdisc show |grep eth1 |grep htb`
if [ ! -z "$var3" ]; then
tc qdisc del dev eth1 root
echo "tc clear eth1"
fi
var4=`tc qdisc show |grep eth2 |grep htb`
if [ ! -z "$var4" ]; then
tc qdisc del dev eth2 root
echo "tc clear eth2"
fi
openair3/EXAMPLES/BARCA_TRIALS/mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Script by Lamia Romdhani
#June 2008
echo Setting MPLS
sudo modprobe mpls6
echo Number of params = $#
if [ $# -eq 3 ]; then
LABEL_IN=$1
IP_NEXT_HOP=$2
LABEL_OUT=$3
echo "IP Next Hop is $IP_NEXT_HOP"
echo 'Starting mpls'
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
sudo mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
else
echo usage: mpls_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
fi
openair3/EXAMPLES/BARCA_TRIALS/mr1_conf_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR1_DIR
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Launching AS and RF
./start_openair.sh 8 8
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
sudo ifconfig eth0 10.0.1.3
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.3
sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
echo Classification rules for MR1 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
echo Classification rules for MR1 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN1_MR1_CH1_MN3 -m $MN3_CH1_MR1_MN1 -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 4
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Multicast state launched with config_mr1
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr1 &
openair3/EXAMPLES/BARCA_TRIALS/mr1_conf_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR1_DIR
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Launching AS and RF
./start_openair.sh 6 8
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
sudo ifconfig eth0 10.0.1.3
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.3
sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
echo Classification rules for MR1 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
echo Classification rules for MR1 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN1_MR1_CH1_MN3 -m $MN3_CH1_MR1_MN1 -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 4
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Multicast state launched with config_mr1
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr1 &
openair3/EXAMPLES/BARCA_TRIALS/mr1_conf_nas_barca_room_nopmip.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR1_DIR
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Launching AS and RF
./start_openair.sh 0 8
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
sudo ifconfig eth0 10.0.1.3
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.3
sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
echo Classification rules for MR1 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
echo Classification rules for MR1 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN1_MR1_CH1_MN3 -m $MN3_CH1_MR1_MN1 -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR1_IN_ADDR -t 226.30.10.15 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH1_IN_ADDR -t 226.30.10.15 -r 4
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Multicast state launched with config_mr1
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr1 &
openair3/EXAMPLES/BARCA_TRIALS/mr1_mpls_nas_barca.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
source params.sh
sudo modprobe mpls6
echo Setting MPLS for mr1
echo "0" > /sys/mpls/debug
# MN1 <-> MN3
echo 'MN3->MN1'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $MN3_CH1_MR1_MN1 labelspace 0 proto ipv6
echo 'MN1->MN3'
var=`mpls nhlfe add key 0 instructions push gen $MN1_MR1_CH1_MN3 nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
echo "Creating routes from MN1 to MN3"
sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
sudo ip -6 route add $MN1_IN6_ADDR/128 dev eth0
# MN1 <-> MN2
echo 'MN2->MN1'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $MR1_LABEL_IN labelspace 0 proto ipv6
echo 'MN1->MN2'
var=`mpls nhlfe add key 0 instructions push gen $MR1_LABEL_OUT nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
echo "Creating routes from MN1 to MN2"
sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#Phil, Lamia 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr1_conf_nas_barca_outdoor.sh
./mr1_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_outdoor_nopmip.sh deleted 100755 → 0
View file @ e179ab0e
#Phil, Lamia 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr1_conf_nas_barca_outdoor.sh
./mr1_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#Phil, Lamia 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr1_conf_nas_barca_parking.sh
./mr1_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_parking_NOPMIP.sh deleted 100755 → 0
View file @ e179ab0e
#Phil, Lamia 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr1_conf_nas_barca_parking.sh
./mr1_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/mr1_nas_barca_room_nopmip.sh deleted 100755 → 0
View file @ e179ab0e
#Phil, Lamia 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr1_conf_nas_barca_room_nopmip.sh
./mr1_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth0
#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR1_EG6_ADDR -E $MR1_IN6_ADDR" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/mr2_conf_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Launching AS and RF
./start_openair.sh 8 9
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.4
sudo ifconfig eth0 10.0.3.3
sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
# Com between MR2 <-> CH1
echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
echo Classification rules for MR2- Cluster 1 - MPLS PMIP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH1_MR2_CH2_LABEL_IN -m $CH1_MR2_CH2_LABEL_OUT -r 5
echo Classification rules for MR2- Cluster 1 - MPLS for com between MN3 and MN1
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN3_MR2_CH1_MN1 -m $MN1_CH1_MR2_MN3 -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 4
# Com between MR2 <-> CH2
#echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
#echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
#echo Classification rules for MR2- Cluster 2 - MPLS PMIP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -l $CH2_MR2_CH1_LABEL_IN -m $CH2_MR2_CH1_LABEL_OUT -r 13
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -l $MN3_MR2_CH2_MN2 -m $MN2_CH2_MR2_MN3 -r 13
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c32 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c33 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 12
echo Multicast state launched with config_mr2
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mesh &
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mn3 &
openair3/EXAMPLES/BARCA_TRIALS/mr2_conf_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Launching AS and RF
./start_openair.sh 5 9
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.4
sudo ifconfig eth0 10.0.3.3
sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
# Com between MR2 <-> CH1
echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
echo Classification rules for MR2- Cluster 1 - MPLS PMIP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -l $CH1_MR2_CH2_LABEL_IN -m $CH1_MR2_CH2_LABEL_OUT -r 5
echo Classification rules for MR2- Cluster 1 - MPLS for com between MN3 and MN1
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -l $MN3_MR2_CH1_MN1 -m $MN1_CH1_MR2_MN3 -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.10 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.11 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.12 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.13 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.14 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -s $MR2_IN_ADDR -t 226.40.10.15 -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c16 -i0 -z0 -s $CH1_IN_ADDR -t 226.40.10.15 -r 4
# Com between MR2 <-> CH2
#echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c17 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c18 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
#echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c19 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
#echo Classification rules for MR2- Cluster 2 - MPLS PMIP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c20 -i0 -z0 -l $CH2_MR2_CH1_LABEL_IN -m $CH2_MR2_CH1_LABEL_OUT -r 13
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c21 -i0 -z0 -l $MN3_MR2_CH2_MN2 -m $MN2_CH2_MR2_MN3 -r 13
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c22 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c23 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c24 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c25 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c26 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c27 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c28 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c29 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c30 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c31 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c32 -i0 -z0 -s $MR2_IN_ADDR -t 226.50.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c33 -i0 -z0 -s $CH2_IN_ADDR -t 226.50.10.15 -r 12
echo Multicast state launched with config_mr2
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mesh &
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr2_mn3 &
openair3/EXAMPLES/BARCA_TRIALS/mr2_mpls_nas_barca.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
# Author: Lamia Romdhani
#June 2008
source params.sh
modprobe mpls6
echo Starting routing ...
echo No MPLS debug
echo "0" >/sys/mpls/debug
#MN1->MN2
./mpls_nas.sh $MR2_CH1_LABEL_IN $CH2_IN6_ADDR $MR2_CH2_LABEL_OUT
#MN2->MN1
./mpls_nas.sh $MR2_CH2_LABEL_IN $CH1_IN6_ADDR $MR2_CH1_LABEL_OUT
#CH1->CH2
./mpls_nas.sh $CH1_MR2_CH2_LABEL_OUT $CH2_IN6_ADDR $CH2_MR2_CH1_LABEL_IN
#CH2->CH1
./mpls_nas.sh $CH2_MR2_CH1_LABEL_OUT $CH1_IN6_ADDR $CH1_MR2_CH2_LABEL_IN
#MN3->MN1
var=`mpls nhlfe add key 0 instructions push gen $MN3_MR2_CH1_MN1 nexthop nasmesh0 ipv6 $CH1_IN6_ADDR |grep key | cut -c 17-26`
sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
sudo ip -6 route add $MN3_IN6_ADDR/128 dev eth0
#MN1->MN3
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $MN1_CH1_MR2_MN3 labelspace 0 proto ipv6
#MN3->MN2
var=`mpls nhlfe add key 0 instructions push gen $MN3_MR2_CH2_MN2 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
#MN2->MN3
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $MN2_CH2_MR2_MN3 labelspace 0 proto ipv6
openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Lamia, Philippe huu nghia, 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr2_conf_nas_barca_outdoor.sh
./mr2_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_outdoor_nopmip.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Lamia, Philippe huu nghia, 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr2_conf_nas_barca_outdoor.sh
./mr2_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Lamia, Philippe huu nghia, 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr2_conf_nas_barca_parking.sh
./mr2_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/mr2_nas_barca_parking_NOPMIP.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Lamia, Philippe huu nghia, 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr2_conf_nas_barca_parking.sh
./mr2_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR2_EG6_ADDR/64 dev eth0
#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_IN6_ADDR -N $MR2_EG6_ADDR -E $MR2_IN6_ADDR1" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/mr3_conf_nas_barca.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR1_DIR
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Launching AS and RF
./start_openair.sh 1 10
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.5
sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
echo Classification rules for MR3 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 4
echo Classification rules for MR3 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 5
echo EADS Multicast for MR3
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Multicast state launched with config_mr3
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
openair3/EXAMPLES/BARCA_TRIALS/mr3_conf_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR1_DIR
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Launching AS and RF
./start_openair.sh 8 10
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
sudo ifconfig eth0 10.0.2.5
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.5
sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
echo Classification rules for MR3 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 4
echo Classification rules for MR3 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 5
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 5
echo EADS Multicast for MR3
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Multicast state launched with config_mr3
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
openair3/EXAMPLES/BARCA_TRIALS/mr3_conf_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
sleep 1
export OPENAIR1_DIR
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Launching AS and RF
./start_openair.sh 6 10
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
sudo ifconfig eth0 10.0.2.5
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 10.0.0.5
sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
echo Classification rules for MR3 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 12
echo Classification rules for MR3 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MN2_MR3_CH2_MN3 -m $MN3_CH2_MR3_MN2 -r 13
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 13
echo EADS Multicast for MR3
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c3 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c4 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.10 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c5 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c6 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.11 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c7 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c8 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.12 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c9 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c10 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.13 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c11 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c12 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.14 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c13 -i0 -z0 -s $MR3_IN_ADDR -t 226.30.10.15 -r 12
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c14 -i0 -z0 -s $CH2_IN_ADDR -t 226.30.10.15 -r 12
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c15 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Multicast state launched with config_mr3
xterm -hold -e /usr/bin/perl $REFLECTOR_DIR/reflector_launch.pl $REFLECTOR_DIR $REFLECTOR_DIR/config_mr3 &
openair3/EXAMPLES/BARCA_TRIALS/mr3_mpls_barca.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
source params.sh
sudo modprobe mpls6
echo Setting MPLS for mr3
echo "0" > /sys/mpls/debug
echo 'MN1->MN2'
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
echo 'MN2->MN1'
var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
sudo ip -6 route add $MN2_IN6_ADDR/128 dev $ETH_MR3
echo 'MN3->MN2'
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $MN3_CH2_MR3_MN2 labelspace 0 proto ipv6
echo 'MN2->MN3'
var=`mpls nhlfe add key 0 instructions push gen $MN2_MR3_CH2_MN3 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
openair3/EXAMPLES/BARCA_TRIALS/mr3_mpls_nas_barca.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
# Script by Lamia Romdhani, Nghia, Philippe, Hicham 18 Feb 2009
source params.sh
sudo modprobe mpls6
echo Setting MPLS for mr3
echo "0" > /sys/mpls/debug
echo 'MN1->MN2'
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
echo 'MN2->MN1'
var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
sudo ip -6 route add $MN2_IN6_ADDR/128 dev $ETH_MR3
echo 'MN3->MN2'
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $MN3_CH2_MR3_MN2 labelspace 0 proto ipv6
echo 'MN2->MN3'
var=`mpls nhlfe add key 0 instructions push gen $MN2_MR3_CH2_MN3 nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $MN3_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
openair3/EXAMPLES/BARCA_TRIALS/mr3_nas_barca.sh deleted 100755 → 0
View file @ e179ab0e
#Phil, Lamia 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr3_conf_nas_barca.sh
./mr3_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/mr3_nas_barca_outdoor.sh deleted 100755 → 0
View file @ e179ab0e
#Phil, Lamia 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr3_conf_nas_barca_outdoor.sh
./mr3_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/mr3_nas_barca_parking.sh deleted 100755 → 0
View file @ e179ab0e
#Phil, Lamia 10 Oct 08
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
./mr3_conf_nas_barca_parking.sh
./mr3_mpls_nas_barca.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth0 promisc
sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth0
#sudo xterm -hold -e "$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR" &
watch -n1 "cat /proc/openair2/lchan_stats ; cat /proc/openair1/bch_stats"
./stop_rf.sh
./del_mpls.sh
sleep 2
./del_mpls.sh
openair3/EXAMPLES/BARCA_TRIALS/params.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
MR1_IN_ADDR=10.0.1.3
MR1_IN6_ADDR=2001:10:0:1:7856:3412:0:2
MR1_EG_ADDR=192.168.9.1
MR1_EG6_ADDR=2001:660:5502::100
# Flow CH1->MR1
MR1_LABEL_IN=1001
# Flow MR1->CH1
MR1_LABEL_OUT=1000
ETH_MR1=eth0
MR2_IN_ADDR=10.0.1.4
MR2_IN6_ADDR1=2001:10:0:1:7856:3412:0:3
MR2_IN6_ADDR2=2001:10:0:2:7856:3412:0:3
MR2_EG6_ADDR=2001:660:5502::300
ETH_MR2=eth0
# Flow CH1->MR2
MR2_CH1_LABEL_IN=2000
# Flow MR2->CH1
MR2_CH1_LABEL_OUT=2001
# Flow CH2->MR2
MR2_CH2_LABEL_IN=3001
# Flow MR2->CH2
MR2_CH2_LABEL_OUT=3000
MR3_IN_ADDR=10.0.1.5
MR3_IN6_ADDR=2001:10:0:2:7856:3412:0:2
MR3_EG_ADDR=192.168.10.1
MR3_EG6_ADDR=2001:660:5502::200
# Flow CH2->MR3
MR3_LABEL_IN=4000
# Flow MR3->CH2
MR3_LABEL_OUT=4001
ETH_MR3=eth2
CH1_IN_ADDR=10.0.1.1
CH2_IN_ADDR=10.0.1.2
CH1_IN6_ADDR=2001:10:0:1:7856:3412:0:1
CH2_IN6_ADDR=2001:10:0:2:7856:3412:0:1
## Communication between the CHs
CH1_MR2_CH2_LABEL_IN=8001
CH1_MR2_CH2_LABEL_OUT=8000
CH2_MR2_CH1_LABEL_IN=9001
CH2_MR2_CH1_LABEL_OUT=9000
## Com between MN1 and MN3
MN1_MR1_CH1_MN3=1500
MN3_CH1_MR1_MN1=1501
MN1_CH1_MR2_MN3=2500
MN3_MR2_CH1_MN1=2501
## Com between MN2 and MN3
MN3_MR2_CH2_MN2=3500
MN2_CH2_MR2_MN3=3501
MN3_CH2_MR3_MN2=4500
MN2_MR3_CH2_MN3=4501
#MN1_IN6_ADDR=2001:660:5502::20
#MN2_IN6_ADDR=2001:660:5502::25
MN1_IN6_ADDR=2001:660:5502::110
MN1_IN_ADDR=192.168.9.2
MN2_IN6_ADDR=2001:660:5502::210
MN3_IN6_ADDR=2001:660:5502::310
MN2_IN_ADDR=192.168.10.2
# Put the right OPENAIR3 path here
OPENAIR3_HOME=/root/openair_trials_2/openair3
OPENAIR3_PMIP6D_PATH=$OPENAIR3_HOME/pmip6d
OPENAIR3_SCRIPTS_PATH=$OPENAIR3_HOME/scripts
REFLECTOR_DIR=$OPENAIR3_HOME/EXAMPLES/BARCA_TRIALS/REFLECTOR
# Put the right OPENAIR2 path here
#OPENAIR2_DIR=~/openair2_r234/openair2/
OPENAIR2_DIR=/root/openair_trials_2/openair2
openair3/EXAMPLES/BARCA_TRIALS/start_openair.sh deleted 100755 → 0
View file @ e179ab0e
if [ "$1" == "" ]; then
echo "Please provide a TX power level (0-8)"
exit
fi
if [ "$2" == "" ]; then
echo "Please provide a Node ID (0-7 for CH, 8-15 for MR/UE)"
exit
fi
if [ "$OPENAIR1_DIR" == "" ] ; then
echo "Please set OPENAIR1_DIR environment variable"
exit
else
echo "OPENAIR1_DIR Set to $OPENAIR1_DIR"
fi
cd $OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF
source ./txgains.sh
case $1 in
0)
CBMIMO1_POWER=$CBMIMO1_m20_dBm
echo "Configuring CBMIMO1 for -20dBm ($CBMIMO1_POWER)"
;;
1)
CBMIMO1_POWER=$CBMIMO1_m15_dBm
echo Configuring CBMIMO1 for -15dBm
;;
2)
CBMIMO1_POWER=$CBMIMO1_m10_dBm
echo Configuring CBMIMO1 for -10dBm
;;
3)
CBMIMO1_POWER=$CBMIMO1_m5_dBm
echo Configuring CBMIMO1 for -5dBm
;;
4)
CBMIMO1_POWER=$CBMIMO1_0_dBm
echo Configuring CBMIMO1 for 0dBm
;;
5)
CBMIMO1_POWER=$CBMIMO1_5_dBm
echo Configuring CBMIMO1 for 5dBm
;;
6)
CBMIMO1_POWER=$CBMIMO1_10_dBm
echo Configuring CBMIMO1 for 10dBm
;;
7)
CBMIMO1_POWER=$CBMIMO1_15_dBm
echo Configuring CBMIMO1 for 15dBm
;;
8)
CBMIMO1_POWER=$CBMIMO1_20_dBm
echo Configuring CBMIMO1 for 20dBm
;;
*)
echo Invalid TX power
exit
esac
echo Removing openair_rf,openair_l2 and openair_rrc modules
sudo rmmod -f openair_rrc
sudo rmmod -f openair_l2
sudo rmmod -f openair_rf
sudo insmod $OPENAIR1_DIR/ARCH/CBMIMO1/DEVICE_DRIVER/openair_rf_l2.ko
OARF_RET=`lsmod | grep -e openair_rf`
if [ "$OARF_RET" = "" ]; then
echo Error loading openair1 module
exit
fi
sudo insmod $OPENAIR2_DIR/LAYER2/openair_layer2.ko
OA2_RET=`lsmod | grep -e openair_l2`
if [ "$OA2_RET" = "" ]; then
echo Error loading openair2 module
exit
fi
sudo insmod $OPENAIR2_DIR/RRC/MESH/openair_RRC.ko
OARRC_RET=`lsmod | grep -e openair_rrc`
if [ "$OARRC_RET" = "" ]; then
echo Error loading openair RRC module
exit
fi
OA_DEV="/dev/openair0"
if [ -c "$OA_DEV" ]; then
echo "$OA_DEV exists"
else
echo "creating $OA_DEV"
sudo mknod $OA_DEV c 127 0
sudo chmod a+rw /dev/openair0
fi
./openair_rf_cbmimo1 1 0
./openair_rf_cbmimo1 1 6 $CBMIMO1_POWER
if [ $2 -lt "8" ]; then
./openair_rf_cbmimo1 1 1 1 $2
elif [ $2 -lt "16" ]; then
./openair_rf_cbmimo1 1 3 1 $2
else
echo Illegal Node ID, exiting
exit
fi
sleep 1
# Watch the status of the radio to check for hardware exit event
#OA1_STATE=`cat /proc/openair1/openair1_state`
#while [ "$OA1_STATE" != "EXITED" ]; do
# OA1_STATE=`cat /proc/openair1/openair1_state`
# sleep .5
#done
#./openair_rf_cbmimo1 1 4 1
#echo CBMIMO1 Hardware exit, restarting ...
openair3/EXAMPLES/BARCA_TRIALS/stop_rf.sh deleted 100755 → 0
View file @ e179ab0e
cd $OPENAIR1_DIR/USERSPACE_TOOLS/OPENAIR_RF
echo STOP STARTS...
./openair_rf_cbmimo1 1 4 1
sleep 2
echo STOP RF DONE
sudo killall chbch_scope
echo STOP CHBCH SCOPE DONE
sudo killall sach_scope
echo STOP_SACH SCOPE DONE
sleep 1
sudo rmmod nasmesh
sleep 1
echo REMOVE NASMESH MODULE DONE
sudo rmmod openair_rrc
sleep 1
echo REMOVE RRC MODULE DONE
sudo rmmod openair_l2
sleep 1
echo REMOVE LAYER2 MODULE DONE
sudo rmmod openair_rf
echo REMOVE RF MODULE DONE
echo STOP FINISHED SUCCESSFULLY
openair3/EXAMPLES/CHORIST092008/TEMP/CH1_scripts_092008.sh deleted 100644 → 0
View file @ e179ab0e
Cluster Head (1) – with NAS_MPLS_PMIP working
CH1_NAS.SH
#!/bin/bash
#Phil, 25 july 08
source params.sh
./ch1_conf_nas.sh
#MN1MN2
./ch1_mpls_nas.sh $MR1_LABEL_OUT $MR2_IN_ADDR $MR2_LABEL_IN
#MN2MN1
./ch1_mpls_nas.sh $MR2_LABEL_OUT $MR1_IN_ADDR $MR1_LABEL_IN
echo /openair3/pmip6d/pmip6d -c -L $CH1_ADDR
/openair3/pmip6d/pmip6d -c -L $CH1_ADDR
./ch1_del_mpls.sh
CH1_CONF_NAS.SH
#!/bin/bash
source params.sh
echo Clusterhead address is $CH_ADDR
# Installing NASMESH driver
rmmod -f nasmesh
insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
echo Classification rules for CH
#CH1<-> MR1 IP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH1_ADDR -y $MR1_IN_ADDR -r 12
#CH1<-> MR1 MPLS user-plane bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
#CH1<-> MR2 (IP Signaling)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH_ADDR -y $MR2_IN_ADDR -r 20
#CH1<-> MR2 (MPLS user-plane bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_LABEL_IN -m $MR2_LABEL_OUT -r 21
#CH1 Broadcast (transmission of Router ADV)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_ADDR -y ff02::1 -r 3
echo Configuring interfaces on CH
# Setup IPv4 multicast route for openair emulation
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
# Bring up openair NASMESH device and set IPv6 address
ifconfig nasmesh0 up
ip addr add 10.0.0.1/24 dev nasmesh0
ip -6 addr add $CH1_ADDR/64 dev nasmesh0
echo nasmesh0 is $CH1_ADDR
echo No MPLS debug
echo "0" >/sys/mpls/debug
sleep 1
echo Launching AS simulator
export OPENAIR2_DIR
xterm -hold -e sh start_openair2_ch1.sh &
sleep 1
CH1_MPLS_NAS.SH
#!/bin/bash
#Script by Lamia Romdhani
#June 2008
echo Setting MPLS for CH
modprobe mpls6
echo Number of params = $#
if [ $# -eq 3 ]; then
LABEL_IN=$1
IP_NEXT_HOP=$2
LABEL_OUT=$3
echo "IP Next Hop is $IP_NEXT_HOP"
echo 'Starting mpls'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
else
echo usage: ch1_mpls_dyntest_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
fi
openair3/EXAMPLES/CHORIST092008/TEMP/CH2_script_092008.sh deleted 100644 → 0
View file @ e179ab0e
Cluster Head (2)– with NAS_MPLS_PMIP working
CH2_NAS.SH
#!/bin/bash
#Phil, 25 july 08
source params.sh
./ch2_conf_nas.sh
#MN1MN2
./ch2_mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN_ADDR $MR2_LABEL_IN
#MN2MN1
./ch_mpls_nas.sh $MR2_LABEL_OUT $MR2_IN_ADDR $MR2_CH2_LABEL_IN
echo /openair3/pmip6d/pmip6d -c -L $CH2_ADDR
/openair3/pmip6d/pmip6d -c -L $CH2_ADDR
./ch2_del_mpls.sh
CH2_CONF_NAS.SH
#!/bin/bash
source params.sh
echo Clusterhead address is $CH2_ADDR
# Installing NASMESH driver
rmmod -f nasmesh
insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
echo Classification rules for CH2
#CH2<-> MR2 IP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_ADDR -y $MR2_IN_ADDR -r 12
#CH<-> MR1 MPLS user-plane bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR2_CH2_LABEL_IN -m $MR2_CH2_LABEL_OUT -r 13
#CH2<-> MR3 (IP Signaling)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH2_ADDR -y $MR3_IN_ADDR -r 20
#CH2<-> MR3 (MPLS user-plane bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_IN -m $MR3_LABEL_OUT -r 21
#CH2 Broadcast (transmission of Router ADV)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_ADDR -y ff02::1 -r 3
echo Configuring interfaces on CH2
# Setup IPv4 multicast route for openair emulation
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth0
# Bring up openair NASMESH device and set IPv6 address
ifconfig nasmesh0 up
ip addr add 10.0.0.1/24 dev nasmesh0
ip -6 addr add $CH2_ADDR/64 dev nasmesh0
echo nasmesh0 is $CH2_ADDR
echo No MPLS debug
echo "0" >/sys/mpls/debug
sleep 1
echo Launching AS simulator
export OPENAIR2_DIR
xterm -hold -e sh start_openair2_ch2.sh &
sleep 1
CH2_MPLS_NAS.SH
#!/bin/bash
#Script by Lamia Romdhani
#June 2008
echo Setting MPLS for CH2
modprobe mpls6
echo Number of params = $#
if [ $# -eq 3 ]; then
LABEL_IN=$1
IP_NEXT_HOP=$2
LABEL_OUT=$3
echo "IP Next Hop is $IP_NEXT_HOP"
echo 'Starting mpls'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
else
echo usage: ch_mpls_dyntest_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
fi
openair3/EXAMPLES/CHORIST092008/TEMP/MR1_script_092008.sh deleted 100644 → 0
View file @ e179ab0e
MR1_NAS.SH
source params.sh
sysctl -w net.ipv6.conf.all.forwarding=1
$OPENAIR3_SCRIPTS_PATH/mr1_conf_nas.sh
$OPENAIR3_SCRIPTS_PATH/mr1_mpls_nas.sh
sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
ifconfig eth0 promisc
ip -6 addr add $MR1_EG_ADDR/64 dev eth0
$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH1_ADDR -N $MR1_EG_ADDR -E $MR1_IN_ADDR
$OPENAIR3_SCRIPTS_PATH/mr1_del_mpls.sh
MR1_CONF_NAS.SH
source params.sh
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Installing NASMESH Driver
rmmod -f nasmesh
insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x02000000
echo Classifcation rule for DTCH-Broadcast - reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Configuring interfaces on mr1
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth4
ifconfig nasmesh0 up
ifconfig namsesh0 10.0.1.2
ip -6 addr add 2001:10:0:1:7856:3412:0:2/64 dev nasmesh0
echo Launching AS simulator
xterm -hold -e sh start_openair2_mr1.sh &
#echo "Waiting for Router ADV from CH (DTCH Broadcast test)"
#IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
#while [ -z $IPv6ADR ] ; do
# sleep 1
# IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
#done
#echo Got Router ADV : IPv6 address is $IPv6ADR
echo Classification rules for MR1 - Default DTCH UL for L3 signaling
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $IPv6ADR -y $CH1_ADDR -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x 2001:10:0:1:7856:3412:0:2 -y $CH1_ADDR -r 4
echo Classification rules for MR1 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
echo eth0 is $MR1_EG_ADDR
#echo Starting routing ...
#echo No MPLS debug
#echo "1" >/sys/mpls/debug
MR1_MPLS_NAS.SH
#!/bin/bash
# Script by Lamia Romdhani, Nghia, Philippe 08 july 2008
# June 2008
source params.sh
modprobe mpls6
echo Setting MPLS for mr1
echo "0" > /sys/mpls/debug
echo 'MN2->MN1'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $MR1_LABEL_IN labelspace 0 proto ipv6
echo 'MN1->MN2'
var=`mpls nhlfe add key 0 instructions push gen $MR1_LABEL_OUT nexthop nasmesh0 ipv6 $CH1_ADDR | grep key |cut -c 17-26`
echo "Creating routes"
ip -6 route add $MN2_ADDR/128 via $CH1_ADDR mpls $var
ip -6 route add $MN1_ADDR/128 dev eth0
openair3/EXAMPLES/CHORIST092008/TEMP/MR2_092008.sh deleted 100644 → 0
View file @ e179ab0e
Mobile Router 2 – with NAS_MPLS_PMIP working
MR2_NAS.SH
source params.sh
sysctl -w net.ipv6.conf.all.forwarding=1
$OPENAIR3_SCRIPTS_PATH/mr2_del_mpls.sh
$OPENAIR3_SCRIPTS_PATH/mr2_conf_nas.sh
#$OPENAIR3_SCRIPTS_PATH/mr2_mpls_nas.sh
#MN1MN2
$OPENAIR3_SCRIPTS_PATH/mr2_mpls_nas.sh $MR2_CH1_LABEL_IN $CH2_IN_ADDR $MR2_CH2_LABEL_OUT
#MN2MN1
$OPENAIR3_SCRIPTS_PATH/mr2_mpls_nas.sh $MR2_CH2_LABEL_IN $CH1_IN_ADDR $MR1_CH1_LABEL_OUT
#/etc/init.d/radvd status
#/etc/init.d/radvd start
#radvdump
sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
ifconfig eth0 promisc
ip -6 addr add $MR2_EG_ADDR/64 dev eth0
$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH_ADDR -N $MR2_EG_ADDR -E $MR2_IN_ADDR
$OPENAIR3_SCRIPTS_PATH/mr2_del_mpls.sh
MR2_CONF_NAS.SH
source params.sh
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Installing NASMESH Driver
rmmod -f nasmesh
insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Configuring interfaces on mr2
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth2
ifconfig nasmesh0 up
ifconfig nasmesh0 10.0.0.3
ip -6 addr add 2001:10:0:1:7856:3412:0:3/64 dev nasmesh0
echo Launching AS simulator
xterm -hold -e sh start_openair2_mr2.sh &
#echo Waiting for Router ADV from CH
#IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
#while [ -z $IPv6ADR ] ; do
# sleep 1
# IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
#done
#echo Got Router ADV : IPv6 address is $IPv6ADR
echo Classification rules for MR2 - Default DTCH UL for L3 signaling
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $IPv6ADR -y $CH_ADDR -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x 2001:10:0:1:7856:3412:0:3 -y $CH_ADDR -r 4
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x 2001:10:0:1::9a03 -y 2001:10:0:1::1 -r 4
echo Classification rules for MR2 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR2_LABEL_OUT -m $MR2_LABEL_IN -r 5
echo eth0 is $MR1_EG_ADDR
MR2_MPLS_NAS.SH
#!/bin/bash
#Script by Lamia Romdhani
#September 2008
echo No MPLS debug
echo "0" >/sys/mpls/debug
echo Setting MPLS for CH
modprobe mpls6
echo Number of params = $#
if [ $# -eq 3 ]; then
LABEL_IN=$1
IP_NEXT_HOP=$2
LABEL_OUT=$3
echo "IP Next Hop is $IP_NEXT_HOP"
echo 'Starting mpls'
mpls labelspace set dev nasmesh0 labelspace 0
mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
else
echo usage: ch_mpls_dyntest_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
fi
openair3/EXAMPLES/CHORIST092008/TEMP/Mr3_script082008.sh deleted 100644 → 0
View file @ e179ab0e
Mobile Router 3 – with NAS_MPLS_PMIP working
MR3_NAS.SH
source params.sh
sysctl -w net.ipv6.conf.all.forwarding=1
$OPENAIR3_SCRIPTS_PATH/mr3_del_mpls.sh
$OPENAIR3_SCRIPTS_PATH/mr3_conf_nas.sh
$OPENAIR3_SCRIPTS_PATH/mr3_mpls_nas.sh
#/etc/init.d/radvd status
#/etc/init.d/radvd start
#radvdump
sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
ifconfig eth0 promisc
ip -6 addr add $MR3_EG_ADDR/64 dev eth0
$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_ADDR -N $MR3_EG_ADDR -E $MR3_IN_ADDR
$OPENAIR3_SCRIPTS_PATH/mr3_del_mpls.sh
MR3_CONF_NAS.SH
source params.sh
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Installing NASMESH Driver
rmmod -f nasmesh
insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Configuring interfaces on mr3
route add -net 224.0.0.0 netmask 240.0.0.0 dev eth2
ifconfig nasmesh0 up
ifconfig nasmesh0 10.0.0.3
ip -6 addr add 2001:10:0:1:7856:3412:0:3/64 dev nasmesh0
echo Launching AS simulator
xterm -hold -e sh start_openair2_mr3.sh &
#echo Waiting for Router ADV from CH
#IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
#while [ -z $IPv6ADR ] ; do
# sleep 1
# IPv6ADR=`ip addr show dev nasmesh0 | grep -e inet6 | egrep -v fe80 | cut -d " " -f6 | cut -d "/" -f1`
#done
#echo Got Router ADV : IPv6 address is $IPv6ADR
echo Classification rules for MR3 - Default DTCH UL for L3 signaling
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $IPv6ADR -y $CH2_ADDR -r 4
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x 2001:10:0:1:7856:3412:0:3 -y $CH2_ADDR -r 4
#$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x 2001:10:0:1::9a03 -y 2001:10:0:1::1 -r 4
echo Classification rules for MR3 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 5
echo eth0 is $MR1_EG_ADDR
MR3_MPLS_NAS.SH
#!/bin/bash
# Author: Lamia Romdhani
#June 2008
source params.sh
modprobe mpls6
echo Starting routing ...
echo No MPLS debug
echo "0" >/sys/mpls/debug
echo Setting MPLS for mr2
echo 'MN2->MN1'
# add label 3000 and forward the packets to mr2, for destination MN1
var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_ADDR |grep key | cut -c 17-26`
ip -6 route add $MN1_ADDR/128 via $CH2_ADDR mpls $var
ip -6 route add $MN2_ADDR/128 dev eth0
echo 'MN1->MN2'
#pop label 1003 and do Ip lookup.
mpls labelspace set dev nasmesh0 labelspace 0
# MR3_LABEL_IN is 1003
mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
openair3/EXAMPLES/CHORIST092008/ch1_conf_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
echo Clusterhead address is $CH_ADDR
# Installing NASMESH driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
echo Classification rules for CH
#CH1<-> MR1 IP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH1_IN6_ADDR -y $MR1_IN6_ADDR -r 12
#CH1<-> MR1 MPLS user-plane bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_IN -m $MR1_LABEL_OUT -r 13
#CH1<-> MR2 (IP Signaling)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH1_IN6_ADDR -y $MR2_IN6_ADDR1 -r 20
#CH1<-> MR2 (MPLS user-plane bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH1_LABEL_IN -m $MR2_CH1_LABEL_OUT -r 21
#CH1 Broadcast (transmission of Router ADV)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH1_IN6_ADDR -y ff02::1 -r 3
echo Configuring interfaces on CH
# Bring up openair NASMESH device and set IPv6 address
sudo ifconfig nasmesh0 up
sudo ip addr add $CH1_IN_ADDR/24 dev nasmesh0
sudo ip -6 addr add $CH1_IN6_ADDR/64 dev nasmesh0
echo nasmesh0 is $CH1_IN6_ADDR
echo No MPLS debug
sudo sh -c 'echo "0" >/sys/mpls/debug'
sleep 1
echo Launching AS simulator
export OPENAIR2_DIR
xterm -hold -e sh start_openair2_ch1.sh &
sleep 1
openair3/EXAMPLES/CHORIST092008/ch1_nas.sh deleted 100755 → 0
View file @ e179ab0e
#Cluster Head (1) – with NAS_MPLS_PMIP working
#!/bin/bash
#Phil, 25 july 08
source params.sh
./ch1_conf_nas.sh
#MN1MN2
./mpls_nas.sh $MR1_LABEL_OUT $MR2_IN6_ADDR1 $MR2_CH1_LABEL_IN
#MN2MN1
./mpls_nas.sh $MR2_CH1_LABEL_OUT $MR1_IN6_ADDR $MR1_LABEL_IN
#echo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH1_IN6_ADDR
#$OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH1_IN6_ADDR
#./del_mpls.sh
openair3/EXAMPLES/CHORIST092008/ch2_conf_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
echo Clusterhead address is $CH2_IN6_ADDR
# Installing NASMESH driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x01000000
echo Classification rules for CH2
#CH2<-> MR2 IP Signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $CH2_IN6_ADDR -y $MR2_IN6_ADDR2 -r 20
#CH<-> MR1 MPLS user-plane bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR2_CH2_LABEL_IN -m $MR2_CH2_LABEL_OUT -r 21
#CH2<-> MR3 (IP Signaling)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $CH2_IN6_ADDR -y $MR3_IN6_ADDR -r 28
#CH2<-> MR3 (MPLS user-plane bearer)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR3_LABEL_IN -m $MR3_LABEL_OUT -r 29
#CH2 Broadcast (transmission of Router ADV)
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x $CH2_IN6_ADDR -y ff02::1 -r 3
echo Configuring interfaces on CH2
# Bring up openair NASMESH device and set IPv6 address
sudo ifconfig nasmesh0 up
sudo ip addr add $CH2_IN_ADDR/24 dev nasmesh0
sudo ip -6 addr add $CH2_IN6_ADDR/64 dev nasmesh0
echo nasmesh0 is $CH2_IN6_ADDR
echo No MPLS debug
sudo sh -c 'echo "0" >/sys/mpls/debug'
sleep 1
echo Launching AS simulator
export OPENAIR2_DIR
xterm -hold -e sh start_openair2_ch2.sh &
sleep 1
openair3/EXAMPLES/CHORIST092008/ch2_nas.sh deleted 100755 → 0
View file @ e179ab0e
#Cluster Head (2)– with NAS_MPLS_PMIP working
#CH2_NAS.SH
#!/bin/bash
#Phil, 25 july 08
source params.sh
./ch2_conf_nas.sh
#MN1MN2
./mpls_nas.sh $MR2_CH2_LABEL_OUT $MR3_IN6_ADDR $MR3_LABEL_IN
#MN2MN1
./mpls_nas.sh $MR3_LABEL_OUT $MR2_IN6_ADDR2 $MR2_CH2_LABEL_IN
#echo $OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR
#$OPENAIR3_HOME/pmip6d/pmip6d -c -L $CH2_IN6_ADDR
#./del_mpls.sh
openair3/EXAMPLES/CHORIST092008/del_mpls.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Script by Irina Dumitrascu (dumitrascu.irina@gmail.com) and Adrian Popa (adrian.popa.gh@gmail.com)
#June 2006
#Released under GPL
#Added by phil, Huu Nghia, 8 July 08
echo Deleting all mpls - xc settings
xc_output="`mpls xc show | cut -c 9-75`"
number_of_lines=`echo $xc_output|wc -l`
for i in `seq 1 $number_of_lines`
do
xc_output_line="`echo $xc_output| head -$i | tail -1`"
echo Deleting: mpls xc del $xc_output_line
mpls xc del $xc_output
#increment i
i=`expr $i+1`
done
echo Deleting all mpls - ip route settings
nr_of_lines=` ip route show |grep mpls |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`ip route show |grep mpls |head -1`
echo Deleting: ip route del $output
ip route del $output
i=`expr $i+1`
done
var1=`ip route show table 1`
if [ ! -z "$var1" ]; then
ip route del table 1
#var1=`ip route show table 1`
#ip route del $var1 table 1
ip route flush table 1
echo "clearing ip route table 1"
fi
var1=`ip route show table 2`
if [ ! -z "$var1" ]; then
ip route del table 2
# var1=`ip route show table 2`
# ip route del $var1 table 2
ip route flush table 2
echo "clearing ip route table 2"
fi
#echo Flushing iptables chains
#iptables -F
#echo Flushing iptables -t nat
#iptables -t nat -F
#echo Flushing iptables -t mangle
#iptables -t mangle -F
echo Deleting all mpls - nhlfe settings
nr_of_lines=` mpls nhlfe show |grep key |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`mpls nhlfe show |grep key |cut -c 17-26 |head -1`
echo Deleting: mpls nhlfe del key $output
mpls nhlfe del key $output
i=`expr $i+1`
done
echo Deleting all mpls - labelspace settings
nr_of_lines=`mpls labelspace show |grep -v "labelspace -1" |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`mpls labelspace show |grep -v "labelspace -1"|cut -c 17-37 |head -1`
echo Deleting: mpls labelspace set $output -1
mpls labelspace set $output -1
i=`expr $i+1`
done
echo Deleting all mpls - ilm settings
nr_of_lines=`mpls ilm show |grep ILM |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`mpls ilm show |grep ILM |cut -c 10-37 |head -1`
echo Deleting: mpls ilm del $output
mpls ilm del $output
i=`expr $i+1`
done
var1=`tc qdisc show |grep eth0 |grep htb`
if [ ! -z "$var1" ]; then
tc qdisc del dev eth0 root
echo "tc clear eth0"
fi
var2=`tc qdisc show |grep eth3 |grep htb`
if [ ! -z "$var2" ]; then
tc qdisc del dev eth3 root
echo "tc clear eth3"
fi
var3=`tc qdisc show |grep eth1 |grep htb`
if [ ! -z "$var3" ]; then
tc qdisc del dev eth1 root
echo "tc clear eth1"
fi
var4=`tc qdisc show |grep eth2 |grep htb`
if [ ! -z "$var4" ]; then
tc qdisc del dev eth2 root
echo "tc clear eth2"
fi
openair3/EXAMPLES/CHORIST092008/mn1_conf.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Huu-Nghia, Philippe, Lamia 28 june 2008
#echo Deleting MN1 autoconfigured addresse
#$OPENAIR3_SCRIPTS_PATH/mn1_del.sh
#ip -6 route add 2001:660:5502::25/128 via 2001:660:5502::10 dev eth0
ip -6 addr del 2001:660:5502::15/64 dev eth0
ip -6 addr add 2001:660:5502::15/64 dev eth0
openair3/EXAMPLES/CHORIST092008/mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Script by Lamia Romdhani
#June 2008
echo Setting MPLS
sudo modprobe mpls6
echo Number of params = $#
if [ $# -eq 3 ]; then
LABEL_IN=$1
IP_NEXT_HOP=$2
LABEL_OUT=$3
echo "IP Next Hop is $IP_NEXT_HOP"
echo 'Starting mpls'
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $LABEL_IN labelspace 0 proto ipv6
var=`mpls nhlfe add key 0 instructions push gen $LABEL_OUT nexthop nasmesh0 ipv6 $IP_NEXT_HOP |grep key | cut -c 17-26`
sudo mpls xc add ilm_label gen $LABEL_IN ilm_labelspace 0 nhlfe_key $var
else
echo usage: mpls_nas.sh LABEL_IN IP_NEXT_HOP LABEL_OUT
fi
openair3/EXAMPLES/CHORIST092008/mr1_conf_nas.sh deleted 100755 → 0
View file @ e179ab0e
source params.sh
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Configuring interfaces on mr1
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 $MR1_IN_ADDR
sudo ip -6 addr add $MR1_IN6_ADDR/64 dev nasmesh0
sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth1
echo Launching AS simulator
xterm -hold -e sh start_openair2_mr1.sh &
echo Classification rules for MR1 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR1_IN6_ADDR -y $CH1_IN6_ADDR -r 4
echo Classification rules for MR1 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR1_LABEL_OUT -m $MR1_LABEL_IN -r 5
openair3/EXAMPLES/CHORIST092008/mr1_del_mpls.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
#Script by Irina Dumitrascu (dumitrascu.irina@gmail.com) and Adrian Popa (adrian.popa.gh@gmail.com)
#June 2006
#Released under GPL
#Added by phil, Huu Nghia, 8 July 08
ip -6 route del $MN2_ADDR/128 via $CH_ADDR
ip -6 route del $MN1_ADDR/128 dev eth0
echo Deleting all mpls - xc settings
xc_output="`mpls xc show | cut -c 9-75`"
number_of_lines=`echo $xc_output|wc -l`
for i in `seq 1 $number_of_lines`
do
xc_output_line="`echo $xc_output| head -$i | tail -1`"
echo Deleting: mpls xc del $xc_output_line
mpls xc del $xc_output
#increment i
i=`expr $i+1`
done
echo Deleting all mpls - ip route settings
nr_of_lines=` ip route show |grep mpls |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`ip route show |grep mpls |head -1`
echo Deleting: ip route del $output
ip route del $output
i=`expr $i+1`
done
var1=`ip route show table 1`
if [ ! -z "$var1" ]; then
ip route del table 1
#var1=`ip route show table 1`
#ip route del $var1 table 1
ip route flush table 1
echo "clearing ip route table 1"
fi
var1=`ip route show table 2`
if [ ! -z "$var1" ]; then
ip route del table 2
# var1=`ip route show table 2`
# ip route del $var1 table 2
ip route flush table 2
echo "clearing ip route table 2"
fi
#echo Flushing iptables chains
#iptables -F
#echo Flushing iptables -t nat
#iptables -t nat -F
#echo Flushing iptables -t mangle
#iptables -t mangle -F
echo Deleting all mpls - nhlfe settings
nr_of_lines=` mpls nhlfe show |grep key |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`mpls nhlfe show |grep key |cut -c 17-26 |head -1`
echo Deleting: mpls nhlfe del key $output
mpls nhlfe del key $output
i=`expr $i+1`
done
echo Deleting all mpls - labelspace settings
nr_of_lines=`mpls labelspace show |grep -v "labelspace -1" |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`mpls labelspace show |grep -v "labelspace -1"|cut -c 17-37 |head -1`
echo Deleting: mpls labelspace set $output -1
mpls labelspace set $output -1
i=`expr $i+1`
done
echo Deleting all mpls - ilm settings
nr_of_lines=`mpls ilm show |grep ILM |wc -l`
for i in `seq 1 $nr_of_lines `
do
output=`mpls ilm show |grep ILM |cut -c 10-37 |head -1`
echo Deleting: mpls ilm del $output
mpls ilm del $output
i=`expr $i+1`
done
var1=`tc qdisc show |grep eth0 |grep htb`
if [ ! -z "$var1" ]; then
tc qdisc del dev eth0 root
echo "tc clear eth0"
fi
var2=`tc qdisc show |grep eth3 |grep htb`
if [ ! -z "$var2" ]; then
tc qdisc del dev eth3 root
echo "tc clear eth3"
fi
var3=`tc qdisc show |grep eth1 |grep htb`
if [ ! -z "$var3" ]; then
tc qdisc del dev eth1 root
echo "tc clear eth1"
fi
var4=`tc qdisc show |grep eth2 |grep htb`
if [ ! -z "$var4" ]; then
tc qdisc del dev eth2 root
echo "tc clear eth2"
fi
openair3/EXAMPLES/CHORIST092008/mr1_mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
# Author: Lamia Romdhani
#June 2008
source params.sh
sudo modprobe mpls6
echo Starting routing ...
echo No MPLS debug
sudo sh -c 'echo 0 >/sys/mpls/debug'
echo 'MN1->MN2'
var=`mpls nhlfe add key 0 instructions push gen $MR1_LABEL_OUT nexthop nasmesh0 ipv6 $CH1_IN6_ADDR | grep key |cut -c 17-26`
echo "Creating routes"
echo Setting MPLS for mr1
echo 'MN2->MN1'
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $MR1_LABEL_IN labelspace 0 proto ipv6
sudo ip -6 route add $MN1_IN6_ADDR/128 dev eth1
sudo ip -6 route add $MN2_IN6_ADDR/128 via $CH1_IN6_ADDR mpls $var
openair3/EXAMPLES/CHORIST092008/mr1_nas.sh deleted 100755 → 0
View file @ e179ab0e
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
#./del_mpls.sh
./mr1_conf_nas.sh
./mr1_mpls_nas.sh
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth1 promisc
sudo ip -6 addr add $MR1_EG6_ADDR/64 dev eth1
#$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR
#./del_mpls.sh
openair3/EXAMPLES/CHORIST092008/mr2_conf_nas.sh deleted 100755 → 0
View file @ e179ab0e
source params.sh
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 3
echo Configuring interfaces on mr2
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 $MR2_IN_ADDR
sudo ip -6 addr add $MR2_IN6_ADDR1/64 dev nasmesh0
sudo ip -6 addr add $MR2_IN6_ADDR2/64 dev nasmesh0
echo Launching AS simulator
xterm -hold -e sh start_openair2_mr2.sh &
echo Classification rules for MR2- Cluster 1 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR2_IN6_ADDR1 -y $CH1_IN6_ADDR -r 4
echo Classification rules for MR2- Cluster 1 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR2_CH1_LABEL_OUT -m $MR2_CH1_LABEL_IN -r 5
echo Classification rules for MR2 -Cluster 2 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -x $MR2_IN6_ADDR2 -y $CH2_IN6_ADDR -r 12
echo Classification rules for MR2 -Cluster 2 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c2 -i0 -z0 -l $MR2_CH2_LABEL_OUT -m $MR2_CH2_LABEL_IN -r 13
openair3/EXAMPLES/CHORIST092008/mr2_nas.sh deleted 100755 → 0
View file @ e179ab0e
source params.sh
sysctl -w net.ipv6.conf.all.forwarding=1
./del_mpls.sh
./mr2_conf_nas.sh
#MN1MN2
./mpls_nas.sh $MR2_CH1_LABEL_IN $CH2_IN6_ADDR $MR2_CH2_LABEL_OUT
#MN2MN1
./mpls_nas.sh $MR2_CH2_LABEL_IN $CH1_IN6_ADDR $MR2_CH1_LABEL_OUT
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
openair3/EXAMPLES/CHORIST092008/mr3_conf_nas.sh deleted 100755 → 0
View file @ e179ab0e
source params.sh
export OPENAIR2_DIR
#echo "0" >/proc/sys/net/ipv6/conf/all/forwarding
echo Installing NASMESH Driver
sudo rmmod -f nasmesh
sudo insmod $OPENAIR2_DIR/NAS/DRIVER/MESH/nasmesh.ko nas_IMEI=0x12345678,0x03000000
echo Classifcation rule for DTCH-Broadcast -reception of Router ADV
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c0 -i0 -z0 -x ff02::1 -y ff02::1 -r 11
echo Configuring interfaces on mr3
sudo ifconfig nasmesh0 up
sudo ifconfig nasmesh0 $MR3_IN_ADDR
sudo ip -6 addr add $MR3_IN6_ADDR/64 dev nasmesh0
sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth3
echo Launching AS simulator
sudo xterm -hold -e sh start_openair2_mr3.sh &
echo Classification rules for MR3 - Default DTCH UL for L3 signaling
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -x $MR3_IN6_ADDR -y $CH2_IN6_ADDR -r 12
echo Classification rules for MR3 - MPLS User-plane Bearer
$OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL/rb_tool -a -c1 -i0 -z0 -l $MR3_LABEL_OUT -m $MR3_LABEL_IN -r 13
openair3/EXAMPLES/CHORIST092008/mr3_mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
# Author: Lamia Romdhani
#June 2008
source params.sh
sudo modprobe mpls6
echo Starting routing ...
echo No MPLS debug
sudo sh -c 'echo 0 >/sys/mpls/debug'
echo Setting MPLS for mr3
echo 'MN1->MN2'
#pop label 4000 and do Ip lookup.
sudo mpls labelspace set dev nasmesh0 labelspace 0
sudo mpls ilm add label gen $MR3_LABEL_IN labelspace 0 proto ipv6
echo 'MN2->MN1'
# add label 3000 and forward the packets to mr2, for destination MN1
var=`mpls nhlfe add key 0 instructions push gen $MR3_LABEL_OUT nexthop nasmesh0 ipv6 $CH2_IN6_ADDR |grep key | cut -c 17-26`
echo "Creating routes"
sudo ip -6 route add $MN1_IN6_ADDR/128 via $CH2_IN6_ADDR mpls $var
sudo ip -6 route add $MN2_IN6_ADDR/128 dev eth3
openair3/EXAMPLES/CHORIST092008/mr3_nas.sh deleted 100755 → 0
View file @ e179ab0e
source params.sh
sudo sysctl -w net.ipv6.conf.all.forwarding=1
#./del_mpls.sh
./mr3_conf_nas.sh
./mr3_mpls_nas.sh
#/etc/init.d/radvd status
#/etc/init.d/radvd start
#radvdump
sudo sysctl -w net.ipv6.conf.eth0.proxy_ndp=1
sudo sysctl -w net.ipv6.conf.nasmesh0.proxy_ndp=1
sudo ifconfig eth3 promisc
sudo ip -6 addr add $MR3_EG6_ADDR/64 dev eth3
#$OPENAIR3_PMIP6D_PATH/pmip6d -m -s -L $CH2_IN6_ADDR -N $MR3_EG6_ADDR -E $MR3_IN6_ADDR
#./del_mpls.sh
openair3/EXAMPLES/CHORIST092008/params.sh deleted 100644 → 0
View file @ e179ab0e
#!/bin/bash
MR1_IN_ADDR=10.0.1.3
MR1_IN6_ADDR=2001:10:0:1:7856:3412:0:2
MR1_EG_ADDR=10.0.2.3
MR1_EG6_ADDR=2001:660:5502::10
# Flow CH1->MR1
MR1_LABEL_IN=1001
# Flow MR1->CH1
MR1_LABEL_OUT=1000
MR2_IN_ADDR=10.0.1.4
MR2_IN6_ADDR1=2001:10:0:1:7856:3412:0:3
MR2_IN6_ADDR2=2001:10:0:2:7856:3412:0:3
MR2_EG6_ADDR=2001:660:5502::30
# Flow CH1->MR2
MR2_CH1_LABEL_IN=2000
# Flow MR2->CH1
MR2_CH1_LABEL_OUT=2001
# Flow CH2->MR2
MR2_CH2_LABEL_IN=3001
# Flow MR2->CH2
MR2_CH2_LABEL_OUT=3000
MR3_IN_ADDR=10.0.1.5
MR3_IN6_ADDR=2001:10:0:2:7856:3412:0:2
MR3_EG6_ADDR=2001:660:5502::15
# Flow CH2->MR3
MR3_LABEL_IN=4000
# Flow MR3->CH2
MR3_LABEL_OUT=4001
CH1_IN_ADDR=10.0.1.1
CH2_IN_ADDR=10.0.1.2
CH1_IN6_ADDR=2001:10:0:1:7856:3412:0:1
CH2_IN6_ADDR=2001:10:0:2:7856:3412:0:1
MN1_IN6_ADDR=2001:660:5502::20
MN2_IN6_ADDR=2001:660:5502::25
# Put the right OPENAIR3 path here
OPENAIR3_HOME=~/openair3
OPENAIR3_PMIP6D_PATH=$OPENAIR3_HOME/pmip6d
OPENAIR3_SCRIPTS_PATH=$OPENAIR3_HOME/scripts
# Put the right OPENAIR2 path here
OPENAIR2_DIR=~/openair2_r220/
openair3/EXAMPLES/CHORIST092008/start_openair2_ch1.sh deleted 100644 → 0
View file @ e179ab0e
source params.sh
cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
./mac_sim -m0 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top
openair3/EXAMPLES/CHORIST092008/start_openair2_ch2.sh deleted 100644 → 0
View file @ e179ab0e
source params.sh
cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
./mac_sim -m1 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top
openair3/EXAMPLES/CHORIST092008/start_openair2_mr1.sh deleted 100755 → 0
View file @ e179ab0e
#!/bin/bash
source params.sh
cd $OPENAIR2_DIR/SIMULATION/USER_TOOLS/LAYER2_SIM
./mac_sim -m2 -t $OPENAIR2_DIR/SIMULATION/TOPOLOGIES/eth_5nodes.top
openair3/EXAMPLES/CHORIST092008/start_openair2_mr2.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/CHORIST092008/start_openair2_mr3.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/params.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/CONSEIL_SCIENTIFIQUE_DEMO/stop_rf.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/COPYING deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/ch_conf_nas.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/ch_del_mpls.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/ch_mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/ch_nas.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/mn1_conf.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/mr1_conf_nas.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/mr1_mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/mr1_nas.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/mr2_conf_nas.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/mr2_del_mpls.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/mr2_mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/mr2_nas.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/params.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/start_openair.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MONO_CH_200810_RF/stop_rf.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_ch1 deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_ch2 deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mn1 deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mn2 deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mr1 deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mr2 deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/config_mr3 deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/REFLECTOR/reflector deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/ch1_conf_nas_eads.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/ch1_nas.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/ch1_nas_eads.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/ch2_conf_nas_eads.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/ch2_nas.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/ch2_nas_eads.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/del_mpls.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mn1_conf.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mn2_conf.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mr1_conf_nas_eads.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mr1_mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mr1_nas.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mr1_nas_eads.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mr2_conf_nas_eads.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mr2_nas.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mr2_nas_eads.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mr3_conf_nas_eads.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mr3_mpls_nas.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mr3_nas.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/mr3_nas_eads.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/params.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/script_tunnel_mn1.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/script_tunnel_mn2.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_ch1.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_ch2.sh deleted 100644 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_mr1.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_mr2.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
openair3/EXAMPLES/MULTICAST_2CHS/start_openair2_mr3.sh deleted 100755 → 0
View file @ e179ab0e
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment