Commit e6a155d2 authored by Lionel Gauthier's avatar Lionel Gauthier

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6189 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent fe8c77bc
Active_eNBs = ( "eNB_Eurecom_0");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
# real_time choice in {rtai, linux-kernel, emulation}
real_time = "rtai";
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_0";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 30;
rx_gain = 25;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -50;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 0;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/*
srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;
*/
pusch_p0_Nominal = -75;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 2;
rach_preambleInitialReceivedTargetPower= -90;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
}
);
#mme_ip_address = ( { ipv4 = "192.168.13.17"; # 175 for MME CENTOS 178 FOR MME EURECOM
mme_ip_address = ( { ipv4 = "192.168.13.17";
ipv6 = "2192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth1";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.82/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth1";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.82/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
# available options for level: error, warn, notice, info, debug, trace
# available options for verbosity: none, low, medium, high, full
log_config :
{
global_log_level ="debug";
global_log_verbosity ="medium";
hw_log_level ="error";
hw_log_verbosity ="medium";
phy_log_level ="warn";
phy_log_verbosity ="medium";
mac_log_level ="warn";
mac_log_verbosity ="medium";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
gtpu_log_level ="debug";
gtpu_log_verbosity ="medium";
udp_log_level ="debug";
udp_log_verbosity ="medium";
};
}
);
# INTERNET GW 192.168.12.100
# |
# |
# 192.168.12.175/24 |
# +-----------+----------------+---+--+---------------------------------------+
# | HSS | | eth1 | |
# +-----------+ +---+--+ |
# | host "olympie" | |
# | | |
# | +-----+------+ |
# | |MASQUERADING| | 192.168.13.17
# | +-----+------+ +----+
# | +------------+ | |eth2+--x disconnected
# | | HSS | | +----+
# | | | | |
# | | | | |
# | | | | |
# | +------------+ +---+--+ |
# | | eth3 | |
# +----------------------------+---+--+---------------------------------------+
# 192.168.13.175/24 |
# |
# | x disconnected
# 192.168.13.17/24 | 192.168.12.175/24|
# +-----------+----------------+---+--+---------------------+---+--+----------+
# | MME | | eth3 | | eth1 | |
# +-----------+ +------+ +------+ |
# | host "yang" |
# | |
# | +-----------------+ |
# | | MME | |
# | | S+P/GW | |
# | | | |
# | | | |
# | | | |
# | | | |
# | | | |
# | +-----------------+ |
# | |
# | |
# | +------+ |
# | | eth2 | |
# +----------------------------+---+--+---------------------------------------+
# 192.168.13.175|
# |
# |
# 192.168.13.82 | (S1-C, S1-U)
# +-----------+----------------+---+--+---------------------------------------+
# | eNB | | eth0 | |
# +-----------+ +------+ |
# | host "calisson" |
# | | 192.168.12.82
# | +----+
# | |eth1+--internet via router
# | +----+
# | |
# +---------------------------------+-----------------------------------------+
# |
# O (RF antenna)
MME :
{
GNU_DEBUGGER = "no";
REALM = "pft";
# Define the limits of the system in terms of served eNB and served UE.
# When the limits will be reached, overload procedure will take place.
MAXENB = 10;
MAXUE = 100;
RELATIVE_CAPACITY = 10;
# Display statistics about whole system (expressed in seconds)
MME_STATISTIC_TIMER = 10;
EMERGENCY_ATTACH_SUPPORTED = "no";
UNAUTHENTICATED_IMSI_SUPPORTED = "no";
# VERBOSITY: none, info, annoying
VERBOSITY = "none";
IP_CAPABILITY = "IPV4V6";
INTERTASK_INTERFACE :
{
# max queue size per task
ITTI_QUEUE_SIZE = 2000000;
};
S6A :
{
# pwd=$OPENAIR_CN/objs
S6A_CONF = "./UTILS/CONF/s6a.conf";
};
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 32;
SCTP_OUTSTREAMS = 32;
};
# ------- S1AP definitions
S1AP :
{
# outcome drop timer value (seconds)
S1AP_OUTCOME_TIMER = 10;
};
# ------- MME served GUMMEI
GUMMEI :
{
# MME code DEFAULT = 0
# size = 8 bits
# maximum of 256 values, comma separated
MME_CODE = [ 1, 30 , 31, 32, 33, 34, 35, 36, 56 , 29 , 8 ];
# MME GROUP ID DEFAULT = 0
# size = 16 bits
# maximum of 65535 values, comma separated
MME_GID = [ 32768 , 4 , 5 , 30 , 8 , 9 , 50021 ];
# TA (mcc.mnc:tracking area code) DEFAULT = 208.34:0
# max values = 999.999:65535
# maximum of 32 values, comma separated
PLMN = (
{MCC="208" ; MNC="92"; TAC = "1"; },
{MCC="208" ; MNC="10"; TAC = "1"; },
{MCC="209" ; MNC="130"; TAC = "4"; },
{MCC="209" ; MNC="012"; TAC = "2"; },
{MCC="208" ; MNC="35"; TAC = "8"; }
);
};
NAS :
{
# 3GPP TS 33.401 section 7.2.4.3 Procedures for NAS algorithm selection
# decreasing preference goes from left to right
ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "EIA2" , "EIA1" , "EIA0" ];
ORDERED_SUPPORTED_CIPHERING_ALGORITHM_LIST = [ "EEA0" , "EEA1" , "EEA2" ];
};
NETWORK_INTERFACES :
{
MME_INTERFACE_NAME_FOR_S1_MME = "eth1";
MME_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.17/24";
MME_INTERFACE_NAME_FOR_S11_MME = "none";
MME_IPV4_ADDRESS_FOR_S11_MME = "0.0.0.0/24";
};
};
S-GW :
{
NETWORK_INTERFACES :
{
SGW_INTERFACE_NAME_FOR_S11 = "none";
SGW_IPV4_ADDRESS_FOR_S11 = "0.0.0.0/24";
SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP = "eth1";
SGW_INTERFACE_MTU_FOR_S1U_S12_S4_UP = 1564;
SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP = "192.168.13.17/24";
# TODO PORT NUMBER
SGW_IPV4_PORT_FOR_S1U_S12_S4_UP = 2152;
SGW_INTERFACE_NAME_FOR_S5_S8_UP = "none";
SGW_IPV4_ADDRESS_FOR_S5_S8_UP = "0.0.0.0/24";
};
# Only for tests
SGW_DROP_UPLINK_S1U_TRAFFIC = "no";
# Only for tests
SGW_DROP_DOWNLINK_S1U_TRAFFIC = "no";
};
P-GW =
{
NETWORK_INTERFACES :
{
PGW_INTERFACE_NAME_FOR_S5_S8 = "none";
PGW_IPV4_ADDRESS_FOR_S5_S8 = "0.0.0.0/24";
PGW_INTERFACE_NAME_FOR_SGI = "eth3";
PGW_IPV4_ADDRESS_FOR_SGI = "192.168.14.17/24";
# Option available only if GTPU in kernel configured
PGW_MASQUERADE_SGI = "yes";
};
IP_ADDRESS_POOL :
{
IPV4_LIST = (
"192.178.0.0/24",
"192.178.1.0/24"
);
IPV6_LIST = (
"2014:02:26::0/120"
);
};
DEFAULT_DNS_1_IPV4_ADDRESS = "192.168.12.100";
DEFAULT_DNS_2_IPV4_ADDRESS = "192.168.106.12";
};
HSS =
{
NETWORK_INTERFACES :
{
HSS_INTERFACE_NAME_FOR_S6A = "none";
HSS_IPV4_ADDRESS_FOR_S6A = "192.168.14.177/24";
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment