Skip to content

O
OpenXG-AMF-Simple
Commit e595da59 authored by luhan's avatar luhan
Browse files
Options

add some configuration file samples

parent 69e01f1b
Hide whitespace changes
Inline Side-by-side
Showing with 614 additions and 1 deletion
etc/example.conf/amf_cpe.conf 0 → 100755
View file @ e595da59
################################################################################
# Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The OpenAirInterface Software Alliance licenses this file to You under
# the OAI Public License, Version 1.1 (the "License"); you may not use this file
# except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.openairinterface.org/?page_id=698
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#-------------------------------------------------------------------------------
# For more information about the OpenAirInterface (OAI) Software Alliance:
# contact@openairinterface.org
################################################################################
AMF =
{
INSTANCE_ID = 10; # 0 is the default
PID_DIRECTORY = "/var/run"; # /var/run is the default
AMF_NAME = "OAI-AMF";
RELATIVE_CAPACITY = 30;
# Display statistics about whole system (in seconds)
STATISTICS_TIMER_INTERVAL = 20; # YOUR CONFIG HERE
CORE_CONFIGURATION:
{
EMERGENCY_SUPPORT = "false";
};
GUAMI:
{
MCC = "110"; MNC = "11"; RegionID = "128"; AMFSetID = "1"; AMFPointer = "1" # YOUR GUAMI CONFIG HERE
}
SERVED_GUAMI_LIST = (
{MCC = "110"; MNC = "11"; RegionID = "128"; AMFSetID = "1"; AMFPointer = "1"} #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
#{MCC = "110"; MNC = "11"; RegionID = "10"; AMFSetID = "1"; AMFPointer = "1"} #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
);
PLMN_SUPPORT_LIST = (
{
MCC = "110"; MNC = "11"; TAC = 100; # YOUR PLMN CONFIG HERE
SLICE_SUPPORT_LIST = (
{SST = "1"; SD = "none"} # YOUR NSSAI CONFIG HERE
#{SST = "1"; SD = "12"} # YOUR NSSAI CONFIG HERE
)
}
);
INTERFACES:
{
# AMF binded interface for N1/N2 interface (NGAP)
NGAP_AMF:
{
INTERFACE_NAME = "eno1"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 38412; # YOUR NETWORK CONFIG HERE
PPID = 60; # YOUR NETWORK CONFIG HERE
};
# AMF binded interface for N11
N11:
{
INTERFACE_NAME = "virbr0"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 8282; # YOUR NETWORK CONFIG HERE
SMF_INSTANCES_POOL = (
{SMF_INSTANCE_ID = 1; IPV4_ADDRESS = "192.168.122.1"; PORT = "8889"; VERSION = "v2"; SELECTED = "true"}, # YOUR SMF CONFIG HERE
{SMF_INSTANCE_ID = 2; IPV4_ADDRESS = "192.168.122.2"; PORT = "80"; VERSION = "v1"; SELECTED = "false"} # YOUR SMF CONFIG HERE
);
};
};
AUTHENTICATION:
{
## MySQL mandatory options
MYSQL_server = "127.0.0.1"; # MySQL Server address
MYSQL_user = "root"; # Database server login
MYSQL_pass = "linux"; # Database server password
MYSQL_db = "OPENXG_DB"; # Your database name
## OP
OPERATOR_key = "63bfa50ee6523365ff14c1f45f88737d"; # OP key matching your database
RANDOM = "true";
};
NAS:
{
ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "NIA1" , "NIA1" , "NIA1" ];
ORDERED_SUPPORTED_CIPHERING_ALGORITHM_LIST = [ "NEA0" , "NEA1" , "NEA2" ];
};
};
MODULES =
{
NGAP_MESSAGE = (
{MSG_NAME = "NGSetupRequest"; ProcedureCode = 21; TypeOfMessage = "initialMessage"}
);
};
etc/example.conf/amf_phone.conf 0 → 100755
View file @ e595da59
################################################################################
# Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The OpenAirInterface Software Alliance licenses this file to You under
# the OAI Public License, Version 1.1 (the "License"); you may not use this file
# except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.openairinterface.org/?page_id=698
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#-------------------------------------------------------------------------------
# For more information about the OpenAirInterface (OAI) Software Alliance:
# contact@openairinterface.org
################################################################################
AMF =
{
INSTANCE_ID = 10; # 0 is the default
PID_DIRECTORY = "/var/run"; # /var/run is the default
AMF_NAME = "OAI-AMF";
RELATIVE_CAPACITY = 30;
# Display statistics about whole system (in seconds)
STATISTICS_TIMER_INTERVAL = 20; # YOUR CONFIG HERE
CORE_CONFIGURATION:
{
EMERGENCY_SUPPORT = "false";
};
GUAMI:
{
MCC = "460"; MNC = "11"; RegionID = "128"; AMFSetID = "1"; AMFPointer = "1" # YOUR GUAMI CONFIG HERE
}
SERVED_GUAMI_LIST = (
{MCC = "460"; MNC = "11"; RegionID = "128"; AMFSetID = "1"; AMFPointer = "1"} #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
#{MCC = "110"; MNC = "11"; RegionID = "10"; AMFSetID = "1"; AMFPointer = "1"} #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
);
PLMN_SUPPORT_LIST = (
{
MCC = "460"; MNC = "11"; TAC = 100; # YOUR PLMN CONFIG HERE
SLICE_SUPPORT_LIST = (
{SST = "1"; SD = "none"} # YOUR NSSAI CONFIG HERE
#{SST = "1"; SD = "12"} # YOUR NSSAI CONFIG HERE
)
}
);
INTERFACES:
{
# AMF binded interface for N1/N2 interface (NGAP)
NGAP_AMF:
{
INTERFACE_NAME = "eno1"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 38412; # YOUR NETWORK CONFIG HERE
PPID = 60; # YOUR NETWORK CONFIG HERE
};
# AMF binded interface for N11
N11:
{
INTERFACE_NAME = "virbr0"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 8282; # YOUR NETWORK CONFIG HERE
SMF_INSTANCES_POOL = (
{SMF_INSTANCE_ID = 1; IPV4_ADDRESS = "192.168.122.1"; PORT = "8889"; VERSION = "v2"; SELECTED = "true"}, # YOUR SMF CONFIG HERE
{SMF_INSTANCE_ID = 2; IPV4_ADDRESS = "192.168.122.2"; PORT = "80"; VERSION = "v1"; SELECTED = "false"} # YOUR SMF CONFIG HERE
);
};
};
AUTHENTICATION:
{
## MySQL mandatory options
MYSQL_server = "127.0.0.1"; # MySQL Server address
MYSQL_user = "root"; # Database server login
MYSQL_pass = "linux"; # Database server password
MYSQL_db = "OPENXG_DB"; # Your database name
## OP
OPERATOR_key = "63bfa50ee6523365ff14c1f45f88737d"; # OP key matching your database
RANDOM = "true";
};
NAS:
{
ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "NIA1" , "NIA1" , "NIA1" ];
ORDERED_SUPPORTED_CIPHERING_ALGORITHM_LIST = [ "NEA0" , "NEA1" , "NEA2" ];
};
};
MODULES =
{
NGAP_MESSAGE = (
{MSG_NAME = "NGSetupRequest"; ProcedureCode = 21; TypeOfMessage = "initialMessage"}
);
};
etc/example.conf/smf_cpe.conf 0 → 100755
View file @ e595da59
################################################################################
# Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The OpenAirInterface Software Alliance licenses this file to You under
# the OAI Public License, Version 1.1 (the "License"); you may not use this file
# except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.openairinterface.org/?page_id=698
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#-------------------------------------------------------------------------------
# For more information about the OpenAirInterface (OAI) Software Alliance:
# contact@openairinterface.org
################################################################################
SMF =
{
INSTANCE = 0; # 0 is the default
PID_DIRECTORY = "/var/run"; # /var/run is the default
INTERFACES :
{
N4 :
{
# SMF binded interface for N4 communication (UPF)
INTERFACE_NAME = "virbr0"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
};
SBI :
{
# SMF binded interface for SBI interface (e.g., communication with AMF, UDM)
INTERFACE_NAME = "virbr0"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 8889; # YOUR NETWORK CONFIG HERE (default: 80)
HTTP2_PORT = 8890; # YOUR NETWORK CONFIG HERE
API_VERSION = "v2"; # YOUR SMF API VERSION CONFIG HERE
};
};
# Pool of UE assigned IP addresses
# Do not make IP pools overlap
# first IPv4 address X.Y.Z.1 is reserved for GTP network device on UPF
IP_ADDRESS_POOL :
{
IPV4_LIST = (
##{RANGE = "12.1.1.2 - 12.1.1.128";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "192.169.0.200 - 192.169.0.253";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "12.1.1.129 - 12.1.1.224";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "192.169.0.2 - 192.169.255.199";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "192.170.0.2 - 192.170.255.253";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "192.171.0.2 - 192.171.255.253";} # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
);
IPV6_LIST = (
{PREFIX = "2001:1:2::/64";}, # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
{PREFIX = "3001:1:2::/64";}, # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
{PREFIX = "4001:1:2::/64";} # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
);
};
DNN_LIST = (
# IPV4_POOL, IPV6_POOL are index in IPV4_LIST, IPV6_LIST, PDU_SESSION_TYPE choice in {IPv4, IPv6, IPv4v6}
{DNN_NI = "ims"; PDU_SESSION_TYPE = "IPv4"; IPV4_POOL = 0; IPV6_POOL = -1},
{DNN_NI = "ctnet"; PDU_SESSION_TYPE = "IPv4"; IPV4_POOL = 2; IPV6_POOL = -1},
{DNN_NI = "apn2"; PDU_SESSION_TYPE = "IPv4"; IPV4_POOL = 1; IPV6_POOL = -1},
{DNN_NI = "apn3"; PDU_SESSION_TYPE = "IPv4"; IPV4_POOL = 3; IPV6_POOL = -1},
{DNN_NI = "apn4"; PDU_SESSION_TYPE = "IPv4"; IPV4_POOL = 4; IPV6_POOL = -1}
);
# DNS address communicated to UEs
DEFAULT_DNS_IPV4_ADDRESS = "114.114.114.114"; # YOUR DNS CONFIG HERE
DEFAULT_DNS_SEC_IPV4_ADDRESS = "114.114.114.114"; # YOUR DNS CONFIG HERE
DEFAULT_DNS_IPV6_ADDRESS = "2001:4860:4860::8888"; # YOUR DNS CONFIG HERE
DEFAULT_DNS_SEC_IPV6_ADDRESS = "2001:4860:4860::8844"; # YOUR DNS CONFIG HERE
SUPPORT_FEATURES:
{
# STRING, {"yes", "no"},
REGISTER_NRF = "no"; # Set to yes if SMF resgisters to an NRF
DISCOVER_UPF = "no"; # Set to yes to enable UPF discovery and selection
FORCE_PUSH_PROTOCOL_CONFIGURATION_OPTIONS = "no"; # Non standard feature, normally should be set to "no",
# but you may need to set to yes for UE that do not explicitly request a PDN address through NAS signalling
USE_LOCAL_SUBSCRIPTION_INFO = "yes"; # Set to yes if SMF uses local subscription information instead of from an UDM
}
AMF :
{
IPV4_ADDRESS = "192.168.122.1"; # YOUR AMF CONFIG HERE
PORT = 8282; # YOUR AMF CONFIG HERE (default: 80)
API_VERSION = "v2"; # YOUR AMF API VERSION FOR SBI CONFIG HERE
};
UDM :
{
IPV4_ADDRESS = "192.168.122.197"; # YOUR UDM CONFIG HERE
PORT = 8181; # YOUR UDM CONFIG HERE (default: 80)
API_VERSION = "v2"; # YOUR UDM API VERSION FOR SBI CONFIG HERE
};
NRF :
{
IPV4_ADDRESS = "192.168.12.100"; # YOUR NRF CONFIG HERE
PORT = 80; # YOUR NRF CONFIG HERE (default: 80)
API_VERSION = "v1"; # YOUR NRF API VERSION FOR SBI CONFIG HERE
};
UPF_LIST = (
{IPV4_ADDRESS = "192.168.0.124" ;} # YOUR UPF CONFIG HERE
);
LOCAL_CONFIGURATION :
{
USE_LOCAL_CONFIGURATION = "yes";
SESSION_MANAGEMENT_SUBSCRIPTION_LIST = (
{ NSSAI_SST = 1, NSSAI_SD = "0", DNN = "ims", DEFAULT_SESSION_TYPE = "IPV4", DEFAULT_SSC_MODE = 1,
QOS_PROFILE_5QI = 6, QOS_PROFILE_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PREEMPTCAP = "NOT_PREEMPT",
QOS_PROFILE_ARP_PREEMPTVULN = "NOT_PREEMPTABLE", SESSION_AMBR_UL = "20Mbps", SESSION_AMBR_DL = "22Mbps"},
{ NSSAI_SST = 1; NSSAI_SD = "0", DNN = "ctnet", DEFAULT_SESSION_TYPE = "IPV4", DEFAULT_SSC_MODE = 1,
QOS_PROFILE_5QI = 9, QOS_PROFILE_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PREEMPTCAP = "NOT_PREEMPT",
QOS_PROFILE_ARP_PREEMPTVULN = "NOT_PREEMPTABLE", SESSION_AMBR_UL = "100Mbps", SESSION_AMBR_DL = "110Mbps"}
);
};
};
etc/example.conf/smf_phone.conf 0 → 100755
View file @ e595da59
################################################################################
# Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The OpenAirInterface Software Alliance licenses this file to You under
# the OAI Public License, Version 1.1 (the "License"); you may not use this file
# except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.openairinterface.org/?page_id=698
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#-------------------------------------------------------------------------------
# For more information about the OpenAirInterface (OAI) Software Alliance:
# contact@openairinterface.org
################################################################################
SMF =
{
INSTANCE = 0; # 0 is the default
PID_DIRECTORY = "/var/run"; # /var/run is the default
INTERFACES :
{
N4 :
{
# SMF binded interface for N4 communication (UPF)
INTERFACE_NAME = "virbr0"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
};
SBI :
{
# SMF binded interface for SBI interface (e.g., communication with AMF, UDM)
INTERFACE_NAME = "virbr0"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 8889; # YOUR NETWORK CONFIG HERE (default: 80)
HTTP2_PORT = 8890; # YOUR NETWORK CONFIG HERE
API_VERSION = "v2"; # YOUR SMF API VERSION CONFIG HERE
};
};
# Pool of UE assigned IP addresses
# Do not make IP pools overlap
# first IPv4 address X.Y.Z.1 is reserved for GTP network device on UPF
IP_ADDRESS_POOL :
{
IPV4_LIST = (
##{RANGE = "12.1.1.2 - 12.1.1.128";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "192.169.0.200 - 192.169.0.253";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "12.1.1.129 - 12.1.1.224";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "192.169.0.2 - 192.169.255.199";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "192.170.0.2 - 192.170.255.253";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "192.171.0.2 - 192.171.255.253";} # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
);
IPV6_LIST = (
{PREFIX = "2001:1:2::/64";}, # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
{PREFIX = "3001:1:2::/64";}, # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
{PREFIX = "4001:1:2::/64";} # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
);
};
DNN_LIST = (
# IPV4_POOL, IPV6_POOL are index in IPV4_LIST, IPV6_LIST, PDU_SESSION_TYPE choice in {IPv4, IPv6, IPv4v6}
{DNN_NI = "ims"; PDU_SESSION_TYPE = "IPv4v6"; IPV4_POOL = 0; IPV6_POOL = 0},
{DNN_NI = "ctnet"; PDU_SESSION_TYPE = "IPv4v6"; IPV4_POOL = 2; IPV6_POOL = 1},
{DNN_NI = "apn2"; PDU_SESSION_TYPE = "IPv4"; IPV4_POOL = 1; IPV6_POOL = -1},
{DNN_NI = "apn3"; PDU_SESSION_TYPE = "IPv4"; IPV4_POOL = 3; IPV6_POOL = -1},
{DNN_NI = "apn4"; PDU_SESSION_TYPE = "IPv4"; IPV4_POOL = 4; IPV6_POOL = -1}
);
# DNS address communicated to UEs
DEFAULT_DNS_IPV4_ADDRESS = "114.114.114.114"; # YOUR DNS CONFIG HERE
DEFAULT_DNS_SEC_IPV4_ADDRESS = "114.114.114.114"; # YOUR DNS CONFIG HERE
DEFAULT_DNS_IPV6_ADDRESS = "2001:4860:4860::8888"; # YOUR DNS CONFIG HERE
DEFAULT_DNS_SEC_IPV6_ADDRESS = "2001:4860:4860::8844"; # YOUR DNS CONFIG HERE
SUPPORT_FEATURES:
{
# STRING, {"yes", "no"},
REGISTER_NRF = "no"; # Set to yes if SMF resgisters to an NRF
DISCOVER_UPF = "no"; # Set to yes to enable UPF discovery and selection
FORCE_PUSH_PROTOCOL_CONFIGURATION_OPTIONS = "no"; # Non standard feature, normally should be set to "no",
# but you may need to set to yes for UE that do not explicitly request a PDN address through NAS signalling
USE_LOCAL_SUBSCRIPTION_INFO = "yes"; # Set to yes if SMF uses local subscription information instead of from an UDM
}
AMF :
{
IPV4_ADDRESS = "192.168.122.1"; # YOUR AMF CONFIG HERE
PORT = 8282; # YOUR AMF CONFIG HERE (default: 80)
API_VERSION = "v2"; # YOUR AMF API VERSION FOR SBI CONFIG HERE
};
UDM :
{
IPV4_ADDRESS = "192.168.122.197"; # YOUR UDM CONFIG HERE
PORT = 8181; # YOUR UDM CONFIG HERE (default: 80)
API_VERSION = "v2"; # YOUR UDM API VERSION FOR SBI CONFIG HERE
};
NRF :
{
IPV4_ADDRESS = "192.168.12.100"; # YOUR NRF CONFIG HERE
PORT = 80; # YOUR NRF CONFIG HERE (default: 80)
API_VERSION = "v1"; # YOUR NRF API VERSION FOR SBI CONFIG HERE
};
UPF_LIST = (
{IPV4_ADDRESS = "192.168.0.124" ;} # YOUR UPF CONFIG HERE
);
LOCAL_CONFIGURATION :
{
USE_LOCAL_CONFIGURATION = "yes";
SESSION_MANAGEMENT_SUBSCRIPTION_LIST = (
{ NSSAI_SST = 1, NSSAI_SD = "0", DNN = "ims", DEFAULT_SESSION_TYPE = "IPV4V6", DEFAULT_SSC_MODE = 1,
QOS_PROFILE_5QI = 5, QOS_PROFILE_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PREEMPTCAP = "NOT_PREEMPT",
QOS_PROFILE_ARP_PREEMPTVULN = "NOT_PREEMPTABLE", SESSION_AMBR_UL = "20Mbps", SESSION_AMBR_DL = "22Mbps"},
{ NSSAI_SST = 1; NSSAI_SD = "0", DNN = "ctnet", DEFAULT_SESSION_TYPE = "IPV4", DEFAULT_SSC_MODE = 1,
QOS_PROFILE_5QI = 9, QOS_PROFILE_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PREEMPTCAP = "NOT_PREEMPT",
QOS_PROFILE_ARP_PREEMPTVULN = "NOT_PREEMPTABLE", SESSION_AMBR_UL = "100Mbps", SESSION_AMBR_DL = "110Mbps"}
);
};
};
etc/example.conf/spgw_u.conf 0 → 100755
View file @ e595da59
################################################################################
# Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The OpenAirInterface Software Alliance licenses this file to You under
# the OAI Public License, Version 1.1 (the "License"); you may not use this file
# except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.openairinterface.org/?page_id=698
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#-------------------------------------------------------------------------------
# For more information about the OpenAirInterface (OAI) Software Alliance:
# contact@openairinterface.org
################################################################################
SPGW-U =
{
INSTANCE = 0; # 0 is the default
PID_DIRECTORY = "/var/run"; # /var/run is the default
#ITTI_TASKS :
#{
#ITTI_TIMER_SCHED_PARAMS :
#{
#CPU_ID = 1;
#SCHED_POLICY = "SCHED_FIFO"; # Values in { SCHED_OTHER, SCHED_IDLE, SCHED_BATCH, SCHED_FIFO, SCHED_RR }
#SCHED_PRIORITY = 85;
#};
#S1U_SCHED_PARAMS :
#{
#CPU_ID = 1;
#SCHED_POLICY = "SCHED_FIFO"; # Values in { SCHED_OTHER, SCHED_IDLE, SCHED_BATCH, SCHED_FIFO, SCHED_RR }
#SCHED_PRIORITY = 84;
#};
#SX_SCHED_PARAMS :
#{
#CPU_ID = 1;
#SCHED_POLICY = "SCHED_FIFO"; # Values in { SCHED_OTHER, SCHED_IDLE, SCHED_BATCH, SCHED_FIFO, SCHED_RR }
#SCHED_PRIORITY = 84;
#};
#ASYNC_CMD_SCHED_PARAMS :
#{
#CPU_ID = 1;
#SCHED_POLICY = "SCHED_FIFO"; # Values in { SCHED_OTHER, SCHED_IDLE, SCHED_BATCH, SCHED_FIFO, SCHED_RR }
#SCHED_PRIORITY = 84;
#};
#};
INTERFACES :
{
S1U_S12_S4_UP :
{
# S-GW binded interface for S1-U communication (GTPV1-U) can be ethernet interface, virtual ethernet interface, we don't advise wireless interfaces
INTERFACE_NAME = "ens3"; # STRING, interface name, YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read"; # STRING, CIDR or "read to let app read interface configured IP address
#PORT = 2152; # Default is 2152
#SCHED_PARAMS :
#{
#CPU_ID = 2;
#SCHED_POLICY = "SCHED_FIFO"; # Values in { SCHED_OTHER, SCHED_IDLE, SCHED_BATCH, SCHED_FIFO, SCHED_RR }
#SCHED_PRIORITY = 98;
#};
};
SX :
{
# S/P-GW binded interface for SX communication
INTERFACE_NAME = "ens11"; # STRING, interface name
IPV4_ADDRESS = "read"; # STRING, CIDR or "read" to let app read interface configured IP address
#PORT = 8805; # Default is 8805
#SCHED_PARAMS :
#{
#CPU_ID = 1;
#SCHED_POLICY = "SCHED_FIFO"; # Values in { SCHED_OTHER, SCHED_IDLE, SCHED_BATCH, SCHED_FIFO, SCHED_RR }
#SCHED_PRIORITY = 95;
#};
};
SGI :
{
# No config to set, the software will set the SGi interface to the interface used for the default route.
INTERFACE_NAME = "ens10"; # STRING, interface name or "default_gateway"
IPV4_ADDRESS = "read"; # STRING, CIDR or "read" to let app read interface configured IP address
#SCHED_PARAMS :
#{
#CPU_ID = 3;
#SCHED_POLICY = "SCHED_FIFO"; # Values in { SCHED_OTHER, SCHED_IDLE, SCHED_BATCH, SCHED_FIFO, SCHED_RR }
#SCHED_PRIORITY = 98;
#};
};
};
PDN_NETWORK_LIST = (
{NETWORK_IPV4 = "192.169.0.0/24"; SNAT = "yes";}, # SNAT Values in {yes, no}
{NETWORK_IPV4 = "12.1.1.0/24"; SNAT = "yes";} # SNAT Values in {yes, no}
);
SPGW-C_LIST = (
{IPV4_ADDRESS="192.168.122.1" ;}
);
NRF :
{
IPV4_ADDRESS = "192.168.122.1"; # YOUR NRF CONFIG HERE
PORT = 80; # YOUR NRF CONFIG HERE (default: 80)
API_VERSION = "v2"; # YOUR NRF API VERSION FOR SBI CONFIG HERE
};
UPF_INFO = (
{ NSSAI_SST = 1, NSSAI_SD = "0", DNN = "ims"},
##{ NSSAI_SST = 222; NSSAI_SD = "123", DNN = "ctnet"}
{ NSSAI_SST = 1; NSSAI_SD = "0", DNN = "ctnet"}
);
SUPPORT_FEATURES:
{
# STRING, {"yes", "no"},
REGISTER_NRF = "no"; # Set to yes if UPF resgisters to an NRF
}
};
src/ngap/ngapMsgs/PduSessionResourceSetupRequest.cpp
View file @ e595da59
...@@ -68,7 +68,7 @@ void PduSessionResourceSetupRequestMsg::setUEAggregateMaxBitRate( ...@@ -68,7 +68,7 @@ void PduSessionResourceSetupRequestMsg::setUEAggregateMaxBitRate(
(Ngap_PDUSessionResourceSetupRequestIEs_t*) calloc( (Ngap_PDUSessionResourceSetupRequestIEs_t*) calloc(
1, sizeof(Ngap_PDUSessionResourceSetupRequestIEs_t)); 1, sizeof(Ngap_PDUSessionResourceSetupRequestIEs_t));
ie->id = Ngap_ProtocolIE_ID_id_UEAggregateMaximumBitRate; ie->id = Ngap_ProtocolIE_ID_id_UEAggregateMaximumBitRate;
ie->criticality = Ngap_Criticality_reject; ie->criticality = Ngap_Criticality_ignore;
ie->value.present = ie->value.present =
Ngap_PDUSessionResourceSetupRequestIEs__value_PR_UEAggregateMaximumBitRate; Ngap_PDUSessionResourceSetupRequestIEs__value_PR_UEAggregateMaximumBitRate;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment