Commit 13f4acd5 authored by Francesco Mani's avatar Francesco Mani

Revert "disabling pdsch and ul"

This reverts commit 582ba0c9.
parent ccd38774
......@@ -276,8 +276,8 @@ uint8_t nr_generate_dci_top(NR_gNB_PDCCH pdcch_vars,
k = cset_start_sc + 1;
while (dmrs_idx<3*pdcch_params.n_rb) {
((int16_t *)txdataF)[(l*frame_parms.ofdm_symbol_size + k)<<1] = (amp * mod_dmrs[l][dmrs_idx<<1]) >> 15;
((int16_t *)txdataF)[((l*frame_parms.ofdm_symbol_size + k)<<1) + 1] = (amp * mod_dmrs[l][(dmrs_idx<<1) + 1]) >> 15;
((int16_t *)txdataF)[(l*frame_parms.ofdm_symbol_size + k)<<1] = ((amp>>1) * mod_dmrs[l][dmrs_idx<<1]) >> 15;
((int16_t *)txdataF)[((l*frame_parms.ofdm_symbol_size + k)<<1) + 1] = ((amp>>1) * mod_dmrs[l][(dmrs_idx<<1) + 1]) >> 15;
#ifdef DEBUG_PDCCH_DMRS
printf("symbol %d position %d => (%d,%d)\n",l,k,((int16_t *)txdataF)[(l*frame_parms.ofdm_symbol_size + k)<<1],
((int16_t *)txdataF)[((l*frame_parms.ofdm_symbol_size + k)<<1)+1]);
......@@ -314,8 +314,8 @@ uint8_t nr_generate_dci_top(NR_gNB_PDCCH pdcch_vars,
for (int m=0; m<NR_NB_SC_PER_RB; m++) {
if ( m == (k_prime<<2)+1) { // DMRS if not already mapped
if (pdcch_params.precoder_granularity == NFAPI_NR_CSET_SAME_AS_REG_BUNDLE) {
((int16_t *)txdataF)[(l*frame_parms.ofdm_symbol_size + k)<<1] = (amp * mod_dmrs[l][dmrs_idx<<1]) >> 15;
((int16_t *)txdataF)[((l*frame_parms.ofdm_symbol_size + k)<<1) + 1] = (amp * mod_dmrs[l][(dmrs_idx<<1) + 1]) >> 15;
((int16_t *)txdataF)[(l*frame_parms.ofdm_symbol_size + k)<<1] = ((amp>>1) * mod_dmrs[l][dmrs_idx<<1]) >> 15;
((int16_t *)txdataF)[((l*frame_parms.ofdm_symbol_size + k)<<1) + 1] = ((amp>>1) * mod_dmrs[l][(dmrs_idx<<1) + 1]) >> 15;
#ifdef DEBUG_PDCCH_DMRS
printf("l %d position %d => (%d,%d)\n",l,k,((int16_t *)txdataF)[(l*frame_parms.ofdm_symbol_size + k)<<1],
((int16_t *)txdataF)[((l*frame_parms.ofdm_symbol_size + k)<<1)+1]);
......
......@@ -195,14 +195,14 @@ void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB,
if (num_pdsch_rnti) {
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_GENERATE_DLSCH,1);
LOG_D(PHY, "PDSCH generation started (%d)\n", num_pdsch_rnti);
/* nr_generate_pdsch(gNB->dlsch[0][0],
nr_generate_pdsch(gNB->dlsch[0][0],
&gNB->pdcch_vars.dci_alloc[0],
gNB->nr_gold_pdsch_dmrs[slot],
gNB->common_vars.txdataF,
AMP, frame, slot, fp, cfg,
&gNB->dlsch_encoding_stats,
&gNB->dlsch_scrambling_stats,
&gNB->dlsch_modulation_stats);*/
&gNB->dlsch_modulation_stats);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_GENERATE_DLSCH,0);
}
......@@ -356,11 +356,11 @@ void phy_procedures_gNB_uespec_RX(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx,
uint8_t harq_pid = 0; // [hna] Previously in LTE, the harq_pid was obtained from the subframe number (Synchronous HARQ)
// In NR, this should be signaled through uplink scheduling dci (i.e, DCI 0_0, 0_1) (Asynchronous HARQ)
/* for (UE_id = 0; UE_id < 1; UE_id++) { // temporary set to 1 untill list of connected UEs is implemented
for (UE_id = 0; UE_id < 1; UE_id++) { // temporary set to 1 untill list of connected UEs is implemented
for(symbol = symbol_start; symbol < symbol_end; symbol++) {
nr_rx_pusch(gNB, UE_id, frame_rx, slot_rx, symbol, harq_pid);
}
nr_ulsch_procedures(gNB, frame_rx, slot_rx, UE_id, harq_pid);
nr_fill_rx_indication(gNB, frame_rx, slot_rx, UE_id, harq_pid); // indicate SDU to MAC
}*/
}
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment