Merge remote-tracking branch 'origin/ru_rau_enhancement-external-timing' into...

Merge remote-tracking branch 'origin/ru_rau_enhancement-external-timing' into ru_rau_enhancement_L1_renaming

ci-scripts/Jenkinsfile-tmp-ran

@@ -27,6 +27,8 @@ def pythonExecutor = params.pythonExecutor
 
 // Location of the test XML file to be run
 def testXMLFile = params.pythonTestXmlFile
+def mainPythonAllXmlFiles = ""
+def buildStageStatus = true
 
 // Name of the test stage
 def testStageName = params.pipelineTestStageName
@@ -53,6 +55,7 @@ def eNB_Repository
 def eNB_Branch
 def eNB_CommitID
 def eNB_AllowMergeRequestProcess = false
+def eNB_TargetBranch
 
 pipeline {
     agent {
@@ -61,6 +64,7 @@ pipeline {
     options {
         disableConcurrentBuilds()
         ansiColor('xterm')
+        lock (ciSmartPhoneResource)
     }
     // the following parameter options are commented out so it shows the ones
     // that you SHALL have to run the job.
@@ -106,8 +110,14 @@ pipeline {
                     if (params.pythonTestXmlFile == null) {
                         // picking default
                         testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
+                        echo "Test XML file(default):   ${testXMLFile}"
+                        mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
                     } else {
-                        echo "Test XML file         :   ${testXMLFile}"
+                        String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                        for (xmlFile in myXmlTestSuite) {
+                            mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
+                            echo "Test XML file         :   ${xmlFile}"
+                        }
                     }
                     // If not present picking a default Stage Name
                     if (params.pipelineTestStageName == null) {
@@ -149,6 +159,14 @@ pipeline {
                     echo "eNB_CommitID          :   ${eNB_CommitID}"
                     if (params.eNB_mergeRequest != null) {
                         eNB_AllowMergeRequestProcess = params.eNB_mergeRequest
+                        if (eNB_AllowMergeRequestProcess) {
+                            if (params.eNB_TargetBranch != null) {
+                                eNB_TargetBranch = params.eNB_TargetBranch
+                            } else {
+                                eNB_TargetBranch = 'develop'
+                            }
+                            echo "eNB_TargetBranch      :   ${eNB_TargetBranch}"
+                        }
                     }
 
                     if (params.EPC_IPAddress == null) {
@@ -184,20 +202,24 @@ pipeline {
             steps {
                 script {
                     dir ('ci-scripts') {
-                      lock (ciSmartPhoneResource) {
-                        try {
-                            echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
-                            withCredentials([
-                                [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
-                                [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
-                                [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
-                            ]) {
-                                sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBRepository=${eNB_Repository} --eNBBranch=${eNB_Branch} --eNBCommitID=${eNB_CommitID} --eNB_AllowMerge=${eNB_AllowMergeRequestProcess} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${testXMLFile}"
+                        echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
+                        withCredentials([
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
+                            [$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
+                        ]) {
+                            sh "python3 main.py --mode=InitiateHtml --eNBRepository=${eNB_Repository} --eNBBranch=${eNB_Branch} --eNBCommitID=${eNB_CommitID} --eNB_AllowMerge=${eNB_AllowMergeRequestProcess} --eNBTargetBranch=${eNB_TargetBranch} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} ${mainPythonAllXmlFiles}"
+                            String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
+                            for (xmlFile in myXmlTestSuite) {
+                                try {
+                                    sh "python3 main.py --mode=TesteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBRepository=${eNB_Repository} --eNBBranch=${eNB_Branch} --eNBCommitID=${eNB_CommitID} --eNB_AllowMerge=${eNB_AllowMergeRequestProcess} --eNBTargetBranch=${eNB_TargetBranch} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${xmlFile}"
+                                } catch (Exception e) {
+                                    currentBuild.result = 'FAILURE'
+                                    buildStageStatus = false
+                                }
                             }
-                        } catch (Exception e) {
-                            currentBuild.result = 'FAILURE'
+                            sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
                         }
-                      }
                     }
                 }
             }
@@ -328,7 +350,7 @@ pipeline {
                             }
                             if(fileExists("ci-scripts/test_results.html")) {
                                 sh "mv ci-scripts/test_results.html test_results-${JOB_NAME}.html"
-                                sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' test_results-${JOB_NAME}.html"
+                                sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html"
                                 archiveArtifacts "test_results-${JOB_NAME}.html"
                             }
                         }

ci-scripts/active_net_interfaces.awk

+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+/inet.*brd/{print "interfaceToUse="$NF"done"}

ci-scripts/buildOnRH.sh

@@ -198,12 +198,18 @@ do
     fi
 done
 
-if [ $NB_PATTERN_FILES -ne $NB_FOUND_FILES ]; then STATUS=-1; fi
+if [ $NB_PATTERN_FILES -ne $NB_FOUND_FILES ]
+then
+    echo "Expecting $NB_PATTERN_FILES log files and found $NB_FOUND_FILES"
+    STATUS=-1
+fi
 
 if [ $STATUS -eq 0 ]
 then
+    echo "BUILD_OK" > $ARCHIVES_LOC/build_final_status.log
     echo "STATUS seems OK"
 else
+    echo "BUILD_KO" > $ARCHIVES_LOC/build_final_status.log
     echo "STATUS failed?"
 fi
 exit $STATUS

ci-scripts/conf_files/enb.band40.tm1.100PRB.FairScheduler.usrpb210.conf

@@ -134,7 +134,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "10.0.0.2";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -144,13 +144,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
-
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 

ci-scripts/conf_files/enb.band40.tm1.25PRB.FairScheduler.usrpb210.conf

@@ -134,7 +134,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "10.0.0.2";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -144,13 +144,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
-
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 

ci-scripts/conf_files/enb.band40.tm1.50PRB.FairScheduler.usrpb210.conf

@@ -134,7 +134,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "10.0.0.2";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -144,13 +144,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
-
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 

ci-scripts/conf_files/enb.band7.tm1.100PRB.usrpb210.conf

@@ -171,7 +171,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -181,12 +181,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -198,8 +197,8 @@ MACRLCs = (
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
 	phy_test_mode = 0;
-        puSch10xSnr     =  200;
-        puCch10xSnr     =  200;
+        puSch10xSnr     =  160;
+        puCch10xSnr     =  160;
         }  
 );
 
@@ -228,7 +227,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf

@@ -171,7 +171,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -181,12 +181,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -198,8 +197,8 @@ MACRLCs = (
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
 	phy_test_mode = 0;
-        puSch10xSnr     =  200;
-        puCch10xSnr     =  200;
+        puSch10xSnr     =  160;
+        puCch10xSnr     =  160;
         }  
 );
 
@@ -219,7 +218,7 @@ RUs = (
          att_rx         = 0;
          bands          = [7];
          max_pdschReferenceSignalPower = -27;
-         max_rxgain                    = 115;
+         max_rxgain                    = 125;
          eNB_instances  = [0];
 
     }
@@ -228,7 +227,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf

@@ -171,7 +171,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -181,12 +181,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -198,8 +197,8 @@ MACRLCs = (
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
 	phy_test_mode = 0;
-        puSch10xSnr     =  200;
-        puCch10xSnr     =  200;
+        puSch10xSnr     =  160;
+        puCch10xSnr     =  160;
         }  
 );
 
@@ -219,7 +218,7 @@ RUs = (
          att_rx         = 0;
          bands          = [7];
          max_pdschReferenceSignalPower = -27;
-         max_rxgain                    = 115;
+         max_rxgain                    = 120;
          eNB_instances  = [0];
 
     }
@@ -228,7 +227,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/lte-fdd-basic-sim.conf

@@ -186,7 +186,6 @@ eNBs =
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
         ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
@@ -238,8 +237,8 @@ THREAD_STRUCT = (
 NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
-    FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_INTERFACE_NAME = "ens3";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/lte-tdd-basic-sim.conf

@@ -145,11 +145,9 @@ eNBs =
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
-
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
         ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
         ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
@@ -219,8 +217,8 @@ THREAD_STRUCT = (
 NETWORK_CONTROLLER :
 {
     FLEXRAN_ENABLED        = "no";
-    FLEXRAN_INTERFACE_NAME = "lo";
-    FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+    FLEXRAN_INTERFACE_NAME = "ens3";
+    FLEXRAN_IPV4_ADDRESS   = "CI_FLEXRAN_CTL_IP_ADDR";
     FLEXRAN_PORT           = 2210;
     FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
     FLEXRAN_AWAIT_RECONF   = "no";

ci-scripts/conf_files/rcc.band40.tm1.100PRB.FairScheduler.usrpb210.conf

@@ -137,7 +137,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "10.0.0.2";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -147,13 +147,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
-
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 

ci-scripts/conf_files/rcc.band40.tm1.25PRB.FairScheduler.usrpb210.conf

@@ -137,7 +137,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "10.0.0.2";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -147,13 +147,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
-
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 

ci-scripts/conf_files/rcc.band40.tm1.50PRB.FairScheduler.usrpb210.conf

@@ -137,7 +137,7 @@ eNBs =
     };
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "10.0.0.2";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -147,13 +147,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "10.0.0.1/24";
-
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "10.0.0.1/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
 

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.100PRB.usrpb210.conf

@@ -174,7 +174,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -184,12 +184,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -201,8 +200,8 @@ MACRLCs = (
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
 	phy_test_mode = 0;
-        puSch10xSnr     =  200;
-        puCch10xSnr     =  200;
+        puSch10xSnr     =  160;
+        puCch10xSnr     =  160;
         }  
 );
 
@@ -235,7 +234,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf

@@ -174,7 +174,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -184,12 +184,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -201,8 +200,8 @@ MACRLCs = (
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
 	phy_test_mode = 0;
-        puSch10xSnr     =  200;
-        puCch10xSnr     =  200;
+        puSch10xSnr     =  160;
+        puCch10xSnr     =  160;
         }  
 );
 
@@ -235,7 +234,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.50PRB.usrpb210.conf

@@ -174,7 +174,7 @@ eNBs =
 
 
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+    mme_ip_address      = ( { ipv4       = "CI_MME_IP_ADDR";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";
@@ -184,12 +184,11 @@ eNBs =
     NETWORK_INTERFACES :
     {
         ENB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1_MME              = "CI_ENB_IP_ADDR";
         ENB_INTERFACE_NAME_FOR_S1U               = "eth0";
-        ENB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_S1U                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_S1U                         = 2152; # Spec 2152
-
-        ENB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.111/24";
+        ENB_IPV4_ADDRESS_FOR_X2C                 = "CI_ENB_IP_ADDR";
         ENB_PORT_FOR_X2C                         = 36422; # Spec 36422
     };
   }
@@ -201,8 +200,8 @@ MACRLCs = (
 	tr_s_preference = "local_L1";
 	tr_n_preference = "local_RRC";
 	phy_test_mode = 0;
-        puSch10xSnr     =  200;
-        puCch10xSnr     =  200;
+        puSch10xSnr     =  160;
+        puCch10xSnr     =  160;
         }  
 );
 
@@ -235,7 +234,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/rru.fdd.band7.conf

@@ -20,7 +20,7 @@ RUs = (
 THREAD_STRUCT = (
   {
     #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
-    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    parallel_config    = "PARALLEL_SINGLE_THREAD";
     #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
     worker_config      = "WORKER_ENABLE";
   }

ci-scripts/conf_files/ue.nfapi.conf

+log_config = {
+  global_log_level                      ="info";
+  global_log_verbosity                  ="medium";
+  hw_log_level                          ="info";
+  hw_log_verbosity                      ="medium";
+  phy_log_level                         ="info";
+  phy_log_verbosity                     ="medium";
+  mac_log_level                         ="info";
+  mac_log_verbosity                     ="medium";
+  rlc_log_level                         ="info";
+  rlc_log_verbosity                     ="medium";
+  pdcp_log_level                        ="info";
+  pdcp_log_verbosity                    ="medium";
+  rrc_log_level                         ="info";
+  rrc_log_verbosity                     ="full";
+};
+
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "nfapi";
+    	local_n_if_name  = "lo";
+      	remote_n_address = "127.0.0.2";
+    	local_n_address  = "127.0.0.1";
+    	local_n_portc    = 50000;
+    	remote_n_portc   = 50001;
+    	local_n_portd    = 50010;
+    	remote_n_portd   = 50011;
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+       nb_tx          = 1
+       nb_rx          = 1
+       att_tx         = 90
+       att_rx         = 0;
+       bands          = [7,38,42,43];
+       max_pdschReferenceSignalPower = -27;
+       max_rxgain                    = 125;
+    }		      
+);

ci-scripts/createVM.sh

@@ -20,8 +20,8 @@
 # *      contact@openairinterface.org
 # */
 
-function usage {
-    echo "OAI VM Creation script"
+function create_usage {
+    echo "OAI CI VM script"
     echo "   Original Author: Raphael Defosseux"
     echo "   Requirements:"
     echo "     -- uvtool uvtool-libvirt apt-cacher"
@@ -31,9 +31,9 @@ function usage {
     echo ""
     echo "Usage:"
     echo "------"
-    echo "    createVM.sh [OPTIONS]"
+    echo "    oai-ci-vm-tool create [OPTIONS]"
     echo ""
-    echo "Options:"
+    echo "Mandatory Options:"
     echo "--------"
     echo "    --job-name #### OR -jn ####"
     echo "    Specify the name of the Jenkins job."
@@ -41,12 +41,7 @@ function usage {
     echo "    --build-id #### OR -id ####"
     echo "    Specify the build ID of the Jenkins job."
     echo ""
-    echo "    --variant enb-usrp     OR -v1"
-    echo "    --variant basic-sim    OR -v2"
-    echo "    --variant phy-sim      OR -v3"
-    echo "    --variant cppcheck     OR -v4"
-    echo "    --variant enb-ethernet OR -v7"
-    echo "    --variant ue-ethernet  OR -v8"
+    variant_usage
     echo "    Specify the variant to build."
     echo ""
     echo "    --help OR -h"
@@ -54,144 +49,21 @@ function usage {
     echo ""
 }
 
-function variant_usage {
-    echo "OAI VM Build Check script"
-    echo "   Original Author: Raphael Defosseux"
-    echo ""
-    echo "    --variant enb-usrp     OR -v1"
-    echo "    --variant basic-sim    OR -v2"
-    echo "    --variant phy-sim      OR -v3"
-    echo "    --variant cppcheck     OR -v4"
-    echo "    --variant enb-ethernet OR -v7"
-    echo "    --variant ue-ethernet  OR -v8"
-    echo ""
-}
-
-if [ $# -lt 1 ] || [ $# -gt 6 ]
-then
-    echo "Syntax Error: not the correct number of arguments"
-    echo ""
-    usage
-    exit 1
-fi
-
-VM_TEMPLATE=ci-
-JOB_NAME=XX
-BUILD_ID=XX
-VM_NAME=ci-enb-usrp
-VM_MEMORY=2048
-VM_CPU=4
+function create_vm {
+    echo "############################################################"
+    echo "OAI CI VM script"
+    echo "############################################################"
+    echo "VM_NAME             = $VM_NAME"
+    echo "VM_MEMORY           = $VM_MEMORY MBytes"
+    echo "VM_CPU              = $VM_CPU"
 
-while [[ $# -gt 0 ]]
-do
-key="$1"
+    echo "############################################################"
+    echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
+    echo "############################################################"
+    uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
+    echo "Waiting for VM to be started"
+    uvt-kvm wait $VM_NAME --insecure
 
-case $key in
-    -h|--help)
-    shift
-    usage
-    exit 0
-    ;;
-    -jn|--job-name)
-    JOB_NAME="$2"
-    shift
-    shift
-    ;;
-    -id|--build-id)
-    BUILD_ID="$2"
-    shift
-    shift
-    ;;
-    -v1)
-    VM_NAME=ci-enb-usrp
-    shift
-    ;;
-    -v2)
-    VM_NAME=ci-basic-sim
-    VM_MEMORY=8192
-    shift
-    ;;
-    -v3)
-    VM_NAME=ci-phy-sim
-    shift
-    ;;
-    -v4)
-    VM_NAME=ci-cppcheck
-    VM_MEMORY=4096
-    VM_CPU=4
-    shift
-    ;;
-    -v7)
-    VM_NAME=ci-enb-ethernet
-    shift
-    ;;
-    -v8)
-    VM_NAME=ci-ue-ethernet
-    shift
-    ;;
-    --variant)
-    variant="$2"
-    case $variant in
-        enb-usrp)
-        VM_NAME=ci-enb-usrp
-        ;;
-        basic-sim)
-        VM_NAME=ci-basic-sim
-        VM_MEMORY=8192
-        ;;
-        phy-sim)
-        VM_NAME=ci-phy-sim
-        ;;
-        cppcheck)
-        VM_NAME=ci-cppcheck
-        VM_MEMORY=4096
-        VM_CPU=4
-        ;;
-        enb-ethernet)
-        VM_NAME=ci-enb-ethernet
-        ;;
-        ue-ethernet)
-        VM_NAME=ci-ue-ethernet
-        ;;
-        *)
-        echo ""
-        echo "Syntax Error: Invalid Variant option -> $variant"
-        echo ""
-        variant_usage
-        exit 1
-    esac
-    shift
-    shift
-    ;;
-    *)
-    echo "Syntax Error: unknown option: $key"
-    echo ""
-    usage
-    exit 1
-esac
-done
-
-if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
-then
-    VM_TEMPLATE=ci-
-else
-    VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
-fi
-
-VM_NAME=`echo $VM_NAME | sed -e "s#ci-#$VM_TEMPLATE#"`
-VM_CMDS=${VM_NAME}_cmds.txt
-
-echo "VM_NAME             = $VM_NAME"
-echo "VM_MEMORY           = $VM_MEMORY MBytes"
-echo "VM_CPU              = $VM_CPU"
-
-echo "############################################################"
-echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
-echo "############################################################"
-uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
-echo "Waiting for VM to be started"
-uvt-kvm wait $VM_NAME --insecure
-
-VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
-echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
-exit 0
+    VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
+    echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
+}

ci-scripts/destroyAllRunningVM.sh

@@ -20,15 +20,17 @@
 # *      contact@openairinterface.org
 # */
 
-function usage {
-    echo "OAI VM Destroy script"
+function destroy_usage {
+    echo "OAI CI VM script"
     echo "   Original Author: Raphael Defosseux"
+    echo "   Requirements:"
+    echo "     -- uvtool uvtool-libvirt apt-cacher"
     echo ""
     echo "Usage:"
     echo "------"
-    echo "    destroyAllRunningVM.sh [OPTIONS]"
+    echo "    oai-ci-vm-tool destroy [OPTIONS]"
     echo ""
-    echo "Options:"
+    echo "Mandatory Options:"
     echo "--------"
     echo "    --job-name #### OR -jn ####"
     echo "    Specify the name of the Jenkins job."
@@ -36,66 +38,26 @@ function usage {
     echo "    --build-id #### OR -id ####"
     echo "    Specify the build ID of the Jenkins job."
     echo ""
+    echo "Options:"
+    echo "--------"
     echo "    --help OR -h"
     echo "    Print this help message."
     echo ""
 }
 
-if [ $# -gt 4 ]
-then
-    echo "Syntax Error: not the correct number of arguments"
-    echo ""
-    usage
-    exit 1
-fi
-
-VM_TEMPLATE=ci-
-JOB_NAME=XX
-BUILD_ID=XX
-
-while [[ $# -gt 0 ]]
-do
-key="$1"
-case $key in
-    -h|--help)
-    shift
-    usage
-    exit 0
-    ;;
-    -jn|--job-name)
-    JOB_NAME="$2"
-    shift
-    shift
-    ;;
-    -id|--build-id)
-    BUILD_ID="$2"
-    shift
-    shift
-    ;;
-    *)
-    echo "Syntax Error: unknown option: $key"
-    echo ""
-    usage
-    exit 1
-esac
-done
-
-if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
-then
-    VM_TEMPLATE=ci-
-else
-    VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
-fi
-
-LIST_CI_VM=`uvt-kvm list | grep $VM_TEMPLATE`
-
-for CI_VM in $LIST_CI_VM
-do
-    VM_IP_ADDR=`uvt-kvm ip $CI_VM`
-    echo "VM to destroy: $CI_VM -- IP $VM_IP_ADDR"
-    uvt-kvm destroy $CI_VM
-    ssh-keygen -R $VM_IP_ADDR
-done
-
-exit 0
-
+function destroy_vm {
+    echo "############################################################"
+    echo "OAI CI VM script"
+    echo "############################################################"
+    echo "VM_TEMPLATE         = $VM_TEMPLATE"
+
+    LIST_CI_VM=`uvt-kvm list | grep $VM_TEMPLATE`
+
+    for CI_VM in $LIST_CI_VM
+    do
+        VM_IP_ADDR=`uvt-kvm ip $CI_VM`
+        echo "VM to destroy: $CI_VM -- IP $VM_IP_ADDR"
+        uvt-kvm destroy $CI_VM
+        ssh-keygen -R $VM_IP_ADDR
+    done
+}

ci-scripts/doGitLabMerge.sh

 #!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
 
 function usage {
     echo "OAI GitLab merge request applying script"

ci-scripts/tcp_iperf_stats.awk

+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
 BEGIN{max=0;min=10000}
 {
     if ($0 ~/Mbits/) {

ci-scripts/waitBuildOnVM.sh

+#!/bin/bash
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+function wait_usage {
+    echo "OAI CI VM script"
+    echo "   Original Author: Raphael Defosseux"
+    echo "   Requirements:"
+    echo "     -- uvtool uvtool-libvirt apt-cacher"
+    echo "     -- xenial image already synced"
+    echo "   Default:"
+    echo "     -- eNB with USRP"
+    echo ""
+    echo "Usage:"
+    echo "------"
+    echo "    oai-ci-vm-tool wait [OPTIONS]"
+    echo ""
+    echo "Mandatory Options:"
+    echo "--------"
+    echo "    --job-name #### OR -jn ####"
+    echo "    Specify the name of the Jenkins job."
+    echo ""
+    echo "    --build-id #### OR -id ####"
+    echo "    Specify the build ID of the Jenkins job."
+    echo ""
+    echo "    --workspace #### OR -ws ####"
+    echo "    Specify the workspace."
+    echo ""
+    variant_usage
+    echo "    Specify the variant to build."
+    echo ""
+    echo "Options:"
+    echo "--------"
+    echo "    --keep-vm-alive OR -k"
+    echo "    Keep the VM alive after the build."
+    echo ""
+    echo "    --help OR -h"
+    echo "    Print this help message."
+    echo ""
+}
+
+function wait_on_vm_build {
+    echo "############################################################"
+    echo "OAI CI VM script"
+    echo "############################################################"
+
+    echo "VM_NAME             = $VM_NAME"
+    echo "VM_CMD_FILE         = $VM_CMDS"
+    echo "JENKINS_WKSP        = $JENKINS_WKSP"
+    echo "ARCHIVES_LOC        = $ARCHIVES_LOC"
+    echo "BUILD_OPTIONS       = $BUILD_OPTIONS"
+
+    IS_VM_ALIVE=`uvt-kvm list | grep -c $VM_NAME`
+
+    if [ $IS_VM_ALIVE -eq 0 ]
+    then
+        echo "############################################################"
+        echo "You should have created the VM before doing anything"
+        echo "############################################################"
+        STATUS=1
+        return
+    fi
+
+    echo "Waiting for VM to be started"
+    uvt-kvm wait $VM_NAME --insecure
+
+    VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
+    echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
+
+    echo "############################################################"
+    echo "Waiting build process to end on VM ($VM_NAME)"
+    echo "############################################################"
+
+    if [[ "$VM_NAME" == *"-cppcheck"* ]]
+    then
+        echo "echo \"ps -aux | grep cppcheck \"" >> $VM_CMDS
+        echo "while [ \$(ps -aux | grep --color=never cppcheck | grep -v grep | wc -l) -gt 0 ]; do sleep 3; done" >> $VM_CMDS
+    else
+        echo "echo \"ps -aux | grep build \"" >> $VM_CMDS
+        echo "while [ \$(ps -aux | grep --color=never build_oai | grep -v grep | wc -l) -gt 0 ]; do sleep 3; done" >> $VM_CMDS
+    fi
+
+    ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
+    rm -f $VM_CMDS
+}
+
+function check_on_vm_build {
+    echo "############################################################"
+    echo "Creating a tmp folder to store results and artifacts"
+    echo "############################################################"
+    if [ ! -d $JENKINS_WKSP/archives ]
+    then
+        mkdir $JENKINS_WKSP/archives
+    fi
+
+    if [ ! -d $ARCHIVES_LOC ]
+    then
+        mkdir $ARCHIVES_LOC
+    fi
+
+    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/*.txt $ARCHIVES_LOC
+    if [[ "$VM_NAME" == *"-cppcheck"* ]]
+    then
+        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/*.xml $ARCHIVES_LOC
+    fi
+
+    if [ $KEEP_VM_ALIVE -eq 0 ]
+    then
+        echo "############################################################"
+        echo "Destroying VM"
+        echo "############################################################"
+        uvt-kvm destroy $VM_NAME
+        ssh-keygen -R $VM_IP_ADDR
+    fi
+    rm -f $VM_CMDS
+
+    echo "############################################################"
+    echo "Checking build status" 
+    echo "############################################################"
+
+    if [[ "$VM_NAME" == *"-cppcheck"* ]]
+    then
+        LOG_FILES=`ls $ARCHIVES_LOC/*.txt $ARCHIVES_LOC/*.xml`
+    else
+        LOG_FILES=`ls $ARCHIVES_LOC/*.txt`
+    fi
+    STATUS=0
+    NB_FOUND_FILES=0
+
+    for FULLFILE in $LOG_FILES 
+    do
+        if [[ $FULLFILE == *"$LOG_PATTERN"* ]]
+        then
+            filename=$(basename -- "$FULLFILE")
+            if [ "$LOG_PATTERN" == ".Rel14.txt" ]
+            then
+                PASS_PATTERN=`echo $filename | sed -e "s#$LOG_PATTERN##"`
+            fi
+            if [ "$LOG_PATTERN" == "basic_simulator" ]
+            then
+                PASS_PATTERN="lte-"
+            fi
+            if [ "$LOG_PATTERN" == "cppcheck.xml" ]
+            then
+                PASS_PATTERN="results version"
+                LOCAL_STAT=`egrep -c "$PASS_PATTERN" $FULLFILE`
+            else
+                LOCAL_STAT=`egrep -c "Built target $PASS_PATTERN" $FULLFILE`
+            fi
+            if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
+            NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
+        fi
+    done
+
+    if [ $NB_PATTERN_FILES -ne $NB_FOUND_FILES ]
+    then
+        echo "Expecting $NB_PATTERN_FILES log files and found $NB_FOUND_FILES"
+        STATUS=-1
+    fi
+
+    # If we were building the FlexRan Controller, flag-touch for basic-simulator to continue
+    if [[ "$VM_NAME" == *"-flexran-rtc"* ]]
+    then
+        if [[ $STATUS -eq 0 ]]
+        then
+            touch $JENKINS_WKSP/flexran/flexran_build_complete.txt
+        fi
+    fi
+
+    if [[ $STATUS -eq 0 ]]
+    then
+        echo "BUILD_OK" > $ARCHIVES_LOC/build_final_status.log
+    else
+        echo "BUILD_KO" > $ARCHIVES_LOC/build_final_status.log
+    fi
+}

ci-scripts/xml_files/enb_usrp210_band40_build.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>build-tab</htmlTabRef>
+	<htmlTabName>Build</htmlTabName>
+	<htmlTabIcon>wrench</htmlTabIcon>
+        <TestCaseRequestedList>
+ 010101
+ 050101 060101 070101
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="010101">
+		<class>Build_eNB</class>
+		<desc>Build eNB (USRP)</desc>
+		<Build_eNB_args>-w USRP -c --eNB</Build_eNB_args>
+	</testCase>
+
+        <testCase id="050101">
+		<class>Initialize_HSS</class>
+		<desc>Initialize HSS</desc>
+        </testCase>
+
+	<testCase id="060101">
+		<class>Initialize_MME</class>
+		<desc>Initialize MME</desc>
+	</testCase>
+
+	<testCase id="070101">
+		<class>Initialize_SPGW</class>
+		<desc>Initialize SPGW</desc>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/enb_usrp210_band40_epc_closure.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>epc-closure</htmlTabRef>
+	<htmlTabName>EPC-Closure</htmlTabName>
+	<htmlTabIcon>log-out</htmlTabIcon>
+        <TestCaseRequestedList>
+ 050201 060201 070201
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+        <testCase id="050201">
+                <class>Terminate_HSS</class>
+                <desc>Terminate HSS</desc>
+        </testCase>
+
+        <testCase id="060201">
+                <class>Terminate_MME</class>
+                <desc>Terminate MME</desc>
+        </testCase>
+
+        <testCase id="070201">
+                <class>Terminate_SPGW</class>
+                <desc>Terminate SPGW</desc>
+        </testCase>
+
+</testCaseList>

ci-scripts/xml_files/enb_usrp210_band40_tracer.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>tracer-test</htmlTabRef>
+	<htmlTabName>T-Tracer</htmlTabName>
+	<htmlTabIcon>duplicate</htmlTabIcon>
+        <TestCaseRequestedList>
+ 040101
+ 030100 040300 040401 040201 030201
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="030100">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (TDD/Band40/5MHz) with T Tracer on</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band40.tm1.25PRB.FairScheduler.usrpb210.conf --T_stdout 0</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+        <testCase id="040300">
+                <class>Attach_UE</class>
+                <desc>Attach single UE</desc>
+                <nbMaxUEtoAttach>1</nbMaxUEtoAttach>
+        </testCase>
+
+        <testCase id="040401">
+                <class>Detach_UE</class>
+                <desc>Detach UE</desc>
+        </testCase>
+
+</testCaseList>