Skip to content

O
OpenXG-RAN
Commit 33d9e8f2 authored by Aikaterini's avatar Aikaterini
Browse files
Options

Merge branch 'develop' into bugfix-48-L1L2signaling

parents cac00e34 eb48479b
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 25599 additions and 1167 deletions
cmake_targets/CMakeLists.txt
View file @ 33d9e8f2
This diff is collapsed.
cmake_targets/autotests/test_case_list.xml
View file @ 33d9e8f2
This diff is collapsed.
cmake_targets/build_oai
View file @ 33d9e8f2
This diff is collapsed.
cmake_targets/rrh_gw/CMakeLists.txt deleted 100644 → 0
View file @ cac00e34
cmake_minimum_required(VERSION 2.8)
set(ENABLE_VCD_FIFO False )
set(ENABLE_ITTI False )
set(RF_BOARD "ETHERNET")
set(PACKAGE_NAME "\"rrh_gw\"")
include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)
cmake_targets/tools/build_helper
View file @ 33d9e8f2
......@@ -180,7 +180,7 @@ check_install_bladerf_driver(){
$SUDO apt-get install -y bladerf libbladerf-dev
$SUDO apt-get install -y bladerf-firmware-fx3
$SUDO apt-get install -y bladerf-fpga-hostedx40
bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
$SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
}
check_install_additional_tools (){
......@@ -380,3 +380,21 @@ done
}
# get from http://www.linuxjournal.com/content/validating-ip-address-bash-script
validate_ip() {
local ip=$1
local stat=1
if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
OIFS=$IFS
IFS='.'
ip=($ip)
IFS=$OIFS
[[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
&& ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
stat=$?
fi
return $stat
}
\ No newline at end of file
openair1/PHY/LTE_REFSIG/primary_synch.h
View file @ 33d9e8f2
/*******************************************************************************
OpenAirInterface
Copyright(c) 1999 - 2014 Eurecom
OpenAirInterface is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OpenAirInterface is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with OpenAirInterface.The full GNU General Public License is
included in this distribution in the file called "COPYING". If not,
see <http://www.gnu.org/licenses/>.
Contact Information
OpenAirInterface Admin: openair_admin@eurecom.fr
OpenAirInterface Tech : openair_tech@eurecom.fr
OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
*******************************************************************************/
short primary_synch0[144] = {0,0,0,0,0,0,0,0,0,0,32767,0,-26120,-19785,11971,-30502,-24020,-22288,32117,6492,31311,9658,-16384,-28378,25100,-21063,-7292,-31946,20429,25618,14948,29158,11971,-30502,31311,9658,25100,-21063,-16384,28377,-24020,22287,32117,6492,-7292,31945,20429,25618,-26120,-19785,-16384,-28378,-16384,28377,-26120,-19785,-32402,4883,31311,-9659,32117,6492,-7292,-31946,32767,-1,25100,-21063,-24020,22287,-32402,4883,-32402,4883,-24020,22287,25100,-21063,32767,-1,-7292,-31946,32117,6492,31311,-9659,-32402,4883,-26120,-19785,-16384,28377,-16384,-28378,-26120,-19785,20429,25618,-7292,31945,32117,6492,-24020,22287,-16384,28377,25100,-21063,31311,9658,11971,-30502,14948,29158,20429,25618,-7292,-31946,25100,-21063,-16384,-28378,31311,9658,32117,6492,-24020,-22288,11971,-30502,-26120,-19785,32767,0,0,0,0,0,0,0,0,0,0,0};
short primary_synch1[144] = {0,0,0,0,0,0,0,0,0,0,32767,0,-31754,-8086,-24020,-22288,2448,32675,-26120,19784,27073,18458,-16384,28377,25100,21062,-29523,14217,-7292,31945,-13477,-29868,-24020,-22288,27073,18458,25100,21062,-16384,-28378,2448,-32676,-26120,19784,-29523,-14218,-7292,31945,-31754,-8086,-16384,28377,-16384,-28378,-31754,-8086,31311,-9659,27073,-18459,-26120,19784,-29523,14217,32767,-1,25100,21062,2448,-32676,31311,-9659,31311,-9659,2448,-32676,25100,21062,32767,0,-29523,14217,-26120,19784,27073,-18459,31311,-9659,-31754,-8086,-16384,-28378,-16384,28377,-31754,-8086,-7292,31945,-29523,-14218,-26120,19784,2448,-32676,-16384,-28378,25100,21062,27073,18458,-24020,-22288,-13477,-29868,-7292,31945,-29523,14217,25100,21062,-16384,28377,27073,18458,-26120,19784,2448,32675,-24020,-22288,-31754,-8086,32767,0,0,0,0,0,0,0,0,0,0,0};
short primary_synch2[144] = {0,0,0,0,0,0,0,0,0,0,32767,0,-31754,8085,-24020,22287,2448,-32676,-26120,-19785,27073,-18459,-16384,-28378,25100,-21063,-29523,-14218,-7292,-31946,-13477,29867,-24020,22287,27073,-18459,25100,-21063,-16384,28377,2448,32675,-26120,-19785,-29523,14217,-7292,-31946,-31754,8085,-16384,-28378,-16384,28377,-31754,8085,31311,9658,27073,18458,-26120,-19785,-29523,-14218,32767,0,25100,-21063,2448,32675,31311,9658,31311,9658,2448,32675,25100,-21063,32767,0,-29523,-14218,-26120,-19785,27073,18458,31311,9658,-31754,8085,-16384,28377,-16384,-28378,-31754,8085,-7292,-31946,-29523,14217,-26120,-19785,2448,32675,-16384,28377,25100,-21063,27073,-18459,-24020,22287,-13477,29867,-7292,-31946,-29523,-14218,25100,-21063,-16384,-28378,27073,-18459,-26120,-19785,2448,-32676,-24020,22287,-31754,8085,32767,-1,0,0,0,0,0,0,0,0,0,0};
......
openair1/PHY/LTE_TRANSPORT/initial_sync.c
View file @ 33d9e8f2
......@@ -48,7 +48,7 @@
#include "gain_control.h"
#endif
#if defined(OAI_USRP) || defined(EXMIMO)
#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_LMSSDR)
#include "common_lib.h"
extern openair0_config_t openair0_cfg[];
#endif
......@@ -291,17 +291,10 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
frame_parms->Ncp=NORMAL;
frame_parms->frame_type=FDD;
init_frame_parms(frame_parms,1);
// write_output("rxdata0.m","rxd0",phy_vars_ue->lte_ue_common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
/*#ifdef OAI_USRP
for (aarx = 0; aarx<frame_parms->nb_antennas_rx;aarx++) {
rxdata128 = (__m128i*)phy_vars_ue->lte_ue_common_vars.rxdata[aarx];
for (i=0; i<(frame_parms->samples_per_tti*10)>>2; i++) {
rxdata128[i] = _mm_srai_epi16(rxdata128[i],4);
}
}
#endif*/
/*
write_output("rxdata0.m","rxd0",phy_vars_ue->lte_ue_common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
exit(-1);
*/
sync_pos = lte_sync_time(phy_vars_ue->lte_ue_common_vars.rxdata,
frame_parms,
(int *)&phy_vars_ue->lte_ue_common_vars.eNb_id);
......@@ -336,9 +329,11 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
#else
#ifndef OAI_USRP
#ifndef OAI_BLADERF
#ifndef OAI_BLADERF
#ifndef OAI_LMSSDR
phy_adjust_gain(phy_vars_ue,0);
#endif
#endif
#endif
#endif
#endif
......@@ -569,7 +564,7 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
phy_vars_ue->lte_frame_parms.phich_config_common.phich_duration,
phich_string[phy_vars_ue->lte_frame_parms.phich_config_common.phich_resource],
phy_vars_ue->lte_frame_parms.nb_antennas_tx_eNB);
#if defined(OAI_USRP) || defined(EXMIMO)
#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_LMSSDR)
LOG_I(PHY,"[UE %d] Frame %d Measured Carrier Frequency %.0f Hz (offset %d Hz)\n",
phy_vars_ue->Mod_id,
phy_vars_ue->frame_rx,
......
openair1/PHY/LTE_TRANSPORT/print_stats.c
View file @ 33d9e8f2
......@@ -50,7 +50,7 @@
#endif
extern int mac_get_rrc_status(uint8_t Mod_id,uint8_t eNB_flag,uint8_t index);
#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_BLADERF)
#if defined(OAI_USRP) || defined(EXMIMO) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
#include "common_lib.h"
extern openair0_config_t openair0_cfg[];
#endif
......@@ -97,10 +97,10 @@ int dump_ue_stats(PHY_VARS_UE *phy_vars_ue, char* buffer, int length, runmode_t
#ifdef EXMIMO
len += sprintf(&buffer[len], "[UE PROC] RX Gain %d dB (LNA %d, vga %d dB)\n",phy_vars_ue->rx_total_gain_dB, openair0_cfg[0].rxg_mode[0],(int)openair0_cfg[0].rx_gain[0]);
#endif
#if defined(OAI_USRP) || defined(OAI_BLADERF)
#if defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
len += sprintf(&buffer[len], "[UE PROC] RX Gain %d dB\n",phy_vars_ue->rx_total_gain_dB);
#endif
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
len += sprintf(&buffer[len], "[UE_PROC] Frequency offset %d Hz (%d), estimated carrier frequency %f Hz\n",phy_vars_ue->lte_ue_common_vars.freq_offset,openair_daq_vars.freq_offset,openair0_cfg[0].rx_freq[0]-phy_vars_ue->lte_ue_common_vars.freq_offset);
#endif
len += sprintf(&buffer[len], "[UE PROC] UE mode = %s (%d)\n",mode_string[phy_vars_ue->UE_mode[0]],phy_vars_ue->UE_mode[0]);
......
openair1/PHY/TOOLS/lte_phy_scope.c
View file @ 33d9e8f2
......@@ -88,7 +88,7 @@ FD_lte_phy_scope_enb *create_lte_phy_scope_enb( void )
fl_set_object_boxtype( fdui->rxsig_t, FL_EMBOSSED_BOX );
fl_set_object_color( fdui->rxsig_t, FL_BLACK, FL_RED );
fl_set_object_lcolor( fdui->rxsig_t, FL_WHITE ); // Label color
fl_set_xyplot_ybounds(fdui->rxsig_t,30,70);
fl_set_xyplot_ybounds(fdui->rxsig_t,10,70);
// Time-domain channel response
fdui->chest_t = fl_add_xyplot( FL_NORMAL_XYPLOT, 410, 20, 370, 100, "Channel Impulse Response (samples, abs)" );
......@@ -396,7 +396,7 @@ FD_lte_phy_scope_ue *create_lte_phy_scope_ue( void )
fl_set_object_boxtype( fdui->rxsig_t, FL_EMBOSSED_BOX );
fl_set_object_color( fdui->rxsig_t, FL_BLACK, FL_RED );
fl_set_object_lcolor( fdui->rxsig_t, FL_WHITE ); // Label color
fl_set_xyplot_ybounds(fdui->rxsig_t,30,70);
fl_set_xyplot_ybounds(fdui->rxsig_t,10,70);
// Time-domain channel response
fdui->chest_t = fl_add_xyplot( FL_NORMAL_XYPLOT, 410, 20, 370, 100, "Channel Impulse Response (samples, abs)" );
......
openair1/PHY/defs.h
View file @ 33d9e8f2
......@@ -76,6 +76,13 @@
#define openair_free(y,x) free((y))
#define PAGE_SIZE 4096
//#ifdef SHRLIBDEV
//extern int rxrescale;
//#define RX_IQRESCALELEN rxrescale
//#else
//#define RX_IQRESCALELEN 15
//#endif
//! \brief Allocate \c size bytes of memory on the heap with alignment 16 and zero it afterwards.
//! If no more memory is available, this function will terminate the program with an assertion error.
static inline void* malloc16_clear( size_t size )
......
openair1/PHY/impl_defs_top.h
View file @ 33d9e8f2
......@@ -44,7 +44,14 @@
/** @defgroup _ref_implementation_ OpenAirInterface LTE Implementation
* @{
* @defgroup _PHY_RF_INTERFACE_ Generic PHY - RF Interface
* @defgroup _PHY_RF_INTERFACE_ PHY - RF Interface
* @ingroup _PHY_RF_INTERFACE_
* @{
* @defgroup _GENERIC_PHY_RF_INTERFACE_ Generic PHY - RF Interface
* @defgroup _USRP_PHY_RF_INTERFACE_ PHY - USRP RF Interface
* @defgroup _BLADERF_PHY_RF_INTERFACE_ PHY - BLADERF RF Interface
* @}
*
* @ingroup _ref_implementation_
* @{
* This module is responsible for defining the generic interface between PHY and RF Target
......
openair1/SCHED/phy_procedures_lte_ue.c
View file @ 33d9e8f2
......@@ -121,7 +121,7 @@ extern int rx_sig_fifo;
#endif
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
extern uint32_t downlink_frequency[MAX_NUM_CCs][4];
#endif
......@@ -197,7 +197,7 @@ void dump_dlsch_SI(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t subframe)
exit(-1);
}
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
//unsigned int gain_table[31] = {100,112,126,141,158,178,200,224,251,282,316,359,398,447,501,562,631,708,794,891,1000,1122,1258,1412,1585,1778,1995,2239,2512,2818,3162};
/*
unsigned int get_tx_amp_prach(int power_dBm, int power_max_dBm, int N_RB_UL)
......@@ -669,7 +669,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
uint8_t ack_status=0;
int8_t Po_PUCCH;
int32_t ulsch_start=0;
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
int overflow=0;
int k,l;
#endif
......@@ -969,7 +969,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
#endif
phy_vars_ue->tx_total_RE = nb_rb*12;
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
tx_amp = get_tx_amp(phy_vars_ue->tx_power_dBm,
phy_vars_ue->tx_power_max_dBm,
phy_vars_ue->lte_frame_parms.N_RB_UL,
......@@ -1065,7 +1065,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
#endif
phy_vars_ue->tx_total_RE = 12;
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
tx_amp = get_tx_amp(Po_PUCCH,
phy_vars_ue->tx_power_max_dBm,
phy_vars_ue->lte_frame_parms.N_RB_UL,
......@@ -1128,7 +1128,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
#endif
phy_vars_ue->tx_total_RE = 12;
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
tx_amp = get_tx_amp(Po_PUCCH,
phy_vars_ue->tx_power_max_dBm,
phy_vars_ue->lte_frame_parms.N_RB_UL,
......@@ -1230,7 +1230,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
if (abstraction_flag == 0) {
nsymb = (frame_parms->Ncp == 0) ? 14 : 12;
#if defined(EXMIMO) || defined(OAI_USRP) //this is the EXPRESS MIMO case
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)//this is the EXPRESS MIMO case
ulsch_start = (phy_vars_ue->rx_offset+subframe_tx*frame_parms->samples_per_tti-
openair_daq_vars.timing_advance-
phy_vars_ue->timing_advance-
......@@ -1257,7 +1257,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++) {
if (frame_parms->Ncp == 1)
PHY_ofdm_mod(&phy_vars_ue->lte_ue_common_vars.txdataF[aa][subframe_tx*nsymb*frame_parms->ofdm_symbol_size],
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
dummy_tx_buffer,
#else
&phy_vars_ue->lte_ue_common_vars.txdata[aa][ulsch_start],
......@@ -1268,7 +1268,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
CYCLIC_PREFIX);
else
normal_prefix_mod(&phy_vars_ue->lte_ue_common_vars.txdataF[aa][subframe_tx*nsymb*frame_parms->ofdm_symbol_size],
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
dummy_tx_buffer,
#else
&phy_vars_ue->lte_ue_common_vars.txdata[aa][ulsch_start],
......@@ -1289,7 +1289,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
}
*/
#ifndef OFDMA_ULSCH
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
apply_7_5_kHz(phy_vars_ue,dummy_tx_buffer,0);
apply_7_5_kHz(phy_vars_ue,dummy_tx_buffer,1);
#else
......@@ -1304,7 +1304,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
*/
#endif
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
overflow = ulsch_start - 9*frame_parms->samples_per_tti;
//if ((slot_tx==4) && (aa==0)) printf("ulsch_start %d, overflow %d\n",ulsch_start,overflow);
......@@ -1404,7 +1404,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
phy_vars_ue->tx_total_RE = 96;
#if defined(EXMIMO) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_BLADERF) || defined(OAI_LMSSDR)
phy_vars_ue->lte_ue_prach_vars[eNB_id]->amp = get_tx_amp(phy_vars_ue->tx_power_dBm,
phy_vars_ue->tx_power_max_dBm,
phy_vars_ue->lte_frame_parms.N_RB_UL,
......@@ -1553,9 +1553,11 @@ void lte_ue_measurement_procedures(uint16_t l, PHY_VARS_UE *phy_vars_ue,uint8_t
#else
#ifndef OAI_USRP
#ifndef OAI_BLADERF
#ifndef OAI_BLADERF
#ifndef OAI_LMSSDR
phy_adjust_gain (phy_vars_ue,0);
#endif
#endif
#endif
#endif
#endif
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GAIN_CONTROL, VCD_FUNCTION_OUT);
......
openair1/SIMULATION/LTE_PHY/dlsim.c
View file @ 33d9e8f2
......@@ -656,7 +656,17 @@ int main(int argc, char **argv)
printf("dual_stream_UE=%d\n", dual_stream_UE);
}
lte_param_init(n_tx,n_rx,transmission_mode,extended_prefix_flag,frame_type,Nid_cell,tdd_config,N_RB_DL,threequarter_fs,osf,perfect_ce);
lte_param_init(n_tx,
n_rx,
transmission_mode,
extended_prefix_flag,
frame_type,
Nid_cell,
tdd_config,
N_RB_DL,
threequarter_fs,
osf,
perfect_ce);
......
openair1/SIMULATION/LTE_PHY/ulsim.c
View file @ 33d9e8f2
......@@ -194,6 +194,7 @@ int main(int argc, char **argv)
int nb_rb_set = 0;
int sf;
int threequarter_fs=0;
opp_enabled=1; // to enable the time meas
cpu_freq_GHz = (double)get_cpu_freq_GHz();
......@@ -203,7 +204,7 @@ int main(int argc, char **argv)
logInit();
while ((c = getopt (argc, argv, "hapZbm:n:Y:X:x:s:w:e:q:d:D:O:c:r:i:f:y:c:oA:C:R:g:N:l:S:T:QB:PI:L")) != -1) {
while ((c = getopt (argc, argv, "hapZEbm:n:Y:X:x:s:w:e:q:d:D:O:c:r:i:f:y:c:oA:C:R:g:N:l:S:T:QB:PI:L")) != -1) {
switch (c) {
case 'a':
channel_model = AWGN;
......@@ -373,6 +374,10 @@ int main(int argc, char **argv)
cyclic_shift = atoi(optarg);
break;
case 'E':
threequarter_fs=1;
break;
case 'N':
N0 = atoi(optarg);
break;
......@@ -470,6 +475,7 @@ int main(int argc, char **argv)
0,
tdd_config,
N_RB_DL,
threequarter_fs,
osf,
0);
......
openair2/ENB_APP/enb_config.c
View file @ 33d9e8f2
This diff is collapsed.
openair2/ENB_APP/enb_config.h
View file @ 33d9e8f2
......@@ -78,6 +78,24 @@ typedef struct mme_ip_address_s {
char *ipv6_address;
} mme_ip_address_t;
typedef struct rrh_gw_config_s {
unsigned udp:1;
unsigned raw:1;
unsigned active:1;
char *local_address;
char *remote_address;
uint16_t local_port;
uint16_t remote_port;
int tx_scheduling_advance;
int tx_sample_advance;
int iq_txshift;
unsigned exmimo:1;
unsigned usrp_b200:1;
unsigned usrp_x300:1;
unsigned bladerf:1;
unsigned lmssdr:1;
} rrh_gw_config_t;
typedef struct Enb_properties_s {
/* Unique eNB_id to identify the eNB within EPC.
* For macro eNB ids this field should be 20 bits long.
......@@ -203,6 +221,13 @@ typedef struct Enb_properties_s {
char *enb_interface_name_for_S1_MME;
in_addr_t enb_ipv4_address_for_S1_MME;
/* Nb of RRH to connect to */
uint8_t nb_rrh_gw;
char *rrh_gw_if_name;
/* List of MME to connect to */
rrh_gw_config_t rrh_gw_config[4];
// otg config
/* Nb of OTG elements */
uint8_t num_otg_elements;
......
openair2/UTIL/LOG/vcd_signal_dumper.c
View file @ 33d9e8f2
......@@ -106,6 +106,9 @@ const char* eurecomVariablesNames[] = {
"lhw_cnt_tx",
"pck_rx",
"pck_tx",
"rx_seq_num",
"rx_seq_num_prv",
"tx_seq_num",
"cnt",
"dummy_dump",
"itti_send_msg",
......
openair2/UTIL/LOG/vcd_signal_dumper.h
View file @ 33d9e8f2
......@@ -78,6 +78,9 @@ typedef enum {
VCD_SIGNAL_DUMPER_VARIABLES_TX_LHWCNT,
VCD_SIGNAL_DUMPER_VARIABLES_RX_PCK,
VCD_SIGNAL_DUMPER_VARIABLES_TX_PCK,
VCD_SIGNAL_DUMPER_VARIABLES_RX_SEQ_NUM,
VCD_SIGNAL_DUMPER_VARIABLES_RX_SEQ_NUM_PRV,
VCD_SIGNAL_DUMPER_VARIABLES_TX_SEQ_NUM,
VCD_SIGNAL_DUMPER_VARIABLES_CNT,
VCD_SIGNAL_DUMPER_VARIABLES_DUMMY_DUMP,
VCD_SIGNAL_DUMPER_VARIABLE_ITTI_SEND_MSG,
......
targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c
View file @ 33d9e8f2
......@@ -38,6 +38,11 @@
#include <inttypes.h>
#include "bladerf_lib.h"
/** @addtogroup _BLADERF_PHY_RF_INTERFACE_
* @{
*/
//! Number of BladeRF devices
#ifdef __SSE4_1__
# include <smmintrin.h>
#endif
......@@ -47,13 +52,21 @@
#endif
int num_devices=0;
/*These items configure the underlying asynch stream used by the the sync interface.
*/
int trx_brf_init(openair0_device *openair0) {
/*! \brief BladeRF Init function (not used at the moment)
* \param device RF frontend parameters set by application
*/
int trx_brf_init(openair0_device *device) {
}
/*! \brief get current timestamp
*\param device the hardware to use
*\param module the bladeRf module
*/
openair0_timestamp trx_get_timestamp(openair0_device *device, bladerf_module module) {
int status;
......@@ -69,18 +82,31 @@ openair0_timestamp trx_get_timestamp(openair0_device *device, bladerf_module mod
return meta.timestamp;
}
int trx_brf_start(openair0_device *openair0) {
/*! \brief Start BladeRF
*\param device the hardware to use
*/
int trx_brf_start(openair0_device *device) {
return 0;
}
/*! \brief Get BladeRF stats
*\param device the hardware to use
*/
static void trx_brf_stats(openair0_device *device){
}
static int trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp, void **buff, int nsamps, int cc) {
/*! \brief Called to send samples to the BladeRF RF target
@param device pointer to the device structure specific to the RF hardware target
@param timestamp The timestamp at whicch the first sample MUST be sent
@param buff Buffer which holds the samples
@param nsamps number of samples to be sent
@param cc index of the component carrier
@param flags Ignored for the moment
*/
static int trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp, void **buff, int nsamps, int cc, int flags) {
int status;
brf_state_t *brf = (brf_state_t*)device->priv;
......@@ -121,6 +147,16 @@ static int trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp,
return(0);
}
/*! \brief Receive samples from hardware.
* Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
* the first channel. *ptimestamp is the time at which the first sample
* was received.
* \param device the hardware to use
* \param[out] ptimestamp the time at which the first sample was received.
* \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
* \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
* \param cc Index of component carrier
*/
static int trx_brf_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) {
int status=0;
......@@ -157,6 +193,9 @@ static int trx_brf_read(openair0_device *device, openair0_timestamp *ptimestamp,
}
/*! \brief Terminate operation of the BladeRF transceiver -- free all associated resources
* \param device the hardware to use
*/
int trx_brf_end(openair0_device *device) {
int status;
......@@ -172,25 +211,39 @@ int trx_brf_end(openair0_device *device) {
return 0;
}
/*! \brief print the BladeRF statistics
* \param device the hardware to use
* \returns 0 on success
*/
int trx_brf_get_stats(openair0_device* device) {
return(0);
}
/*! \brief Reset the BladeRF statistics
* \param device the hardware to use
* \returns 0 on success
*/
int trx_brf_reset_stats(openair0_device* device) {
return(0);
}
/*! \brief Stop USRP
* \param device the hardware to use
*/
int trx_brf_stop(openair0_device* device) {
return(0);
}
/*! \brief Set frequencies (TX/RX)
* \param device the hardware to use
* \returns 0 in success
*/
int trx_brf_set_freq(openair0_device* device) {
int status;
......@@ -213,12 +266,19 @@ int trx_brf_set_freq(openair0_device* device) {
return(0);
}
/*! \brief Set Gains (TX/RX)
* \param device the hardware to use
* \returns 0 in success
*/
int trx_brf_set_gains(openair0_device* device) {
return(0);
}
#define RXDCLENGTH 16384
int16_t cos_fsover8[8] = {2047, 1447, 0, -1448, -2047, -1448, 0, 1447};
int16_t cos_3fsover8[8] = {2047, -1448, 0, 1447, -2047, 1447, 0, -1448};
......@@ -822,15 +882,23 @@ void calibrate_rf(openair0_device *device) {
// write_output("blade_rf_test.m","rxs",calib_buff,RXDCLENGTH,1,1);
}
int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openair0_cfg) {
/*! \brief Initialize Openair BLADERF target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
*/
int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
int status;
int card=0;
brf_state_t *brf = (brf_state_t*)malloc(sizeof(brf_state_t));
memset(brf, 0, sizeof(brf_state_t));
/* device specific */
openair0_cfg->txlaunch_wait = 1;//manage when TX processing is triggered
openair0_cfg->txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
openair0_cfg->iq_txshift = 0;// shift
openair0_cfg->iq_rxrescale = 15;//rescale iqs
// init required params
switch ((int)openair0_cfg->sample_rate) {
case 30720000:
openair0_cfg->samples_per_packet = 2048;
......@@ -857,7 +925,8 @@ int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openai
exit(-1);
break;
}
openair0_cfg->iq_txshift= 0;
openair0_cfg->iq_rxrescale = 15; /*not sure*/
openair0_cfg->rx_gain_calib_table = calib_table_fx4;
// The number of buffers to use in the underlying data stream
......@@ -1001,6 +1070,7 @@ int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openai
printf("BLADERF: Initializing openair0_device\n");
device->priv = brf;
device->Mod_id = num_devices++;
device->type = BLADERF_DEV;
device->trx_start_func = trx_brf_start;
device->trx_end_func = trx_brf_end;
device->trx_read_func = trx_brf_read;
......@@ -1019,6 +1089,9 @@ int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openai
return 0;
}
/*! \brief bladeRF error report
* \param status
*/
int brf_error(int status) {
//exit(-1);
......@@ -1026,7 +1099,9 @@ int brf_error(int status) {
}
/*! \brief Open BladeRF from serial port
* \param serial name of serial port on which to open BladeRF device
*/
struct bladerf * open_bladerf_from_serial(const char *serial) {
int status;
......@@ -1053,6 +1128,10 @@ struct bladerf * open_bladerf_from_serial(const char *serial) {
return dev;
}
}
/*! \brief Get BladeRF log level
* \param log_level log level
*/
int get_brf_log_level(int log_level){
int level=BLADERF_LOG_LEVEL_INFO;
......@@ -1081,3 +1160,4 @@ int get_brf_log_level(int log_level){
}
return level;
}
/*@}*/
targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h
View file @ 33d9e8f2
......@@ -37,45 +37,69 @@
#include "common_lib.h"
#include "log.h"
/** @addtogroup _BLADERF_PHY_RF_INTERFACE_
* @{
*/
/*! \brief BladeRF specific data structure */
typedef struct {
// opaque BRF data struct
//! opaque BladeRF device struct. An empty ("") or NULL device identifier will result in the first encountered device being opened (using the first discovered backend)
struct bladerf *dev;
// An empty ("") or NULL device identifier will result in the first encountered device being opened (using the first discovered backend)
//! Number of buffers
unsigned int num_buffers;
//! Buffer size
unsigned int buffer_size;
//! Number of transfers
unsigned int num_transfers;
//! RX timeout
unsigned int rx_timeout_ms;
//! TX timeout
unsigned int tx_timeout_ms;
//! Metadata for RX
struct bladerf_metadata meta_rx;
//!Metadata for TX
struct bladerf_metadata meta_tx;
//! Sample rate
unsigned int sample_rate;
// time offset between transmiter timestamp and receiver timestamp;
//! time offset between transmiter timestamp and receiver timestamp;
double tdiff;
// use brf_time_offset to get this value
//! TX number of forward samples use brf_time_offset to get this value
int tx_forward_nsamps; //166 for 20Mhz
// --------------------------------
// Debug and output control
// --------------------------------
//! Number of underflows
int num_underflows;
//! Number of overflows
int num_overflows;
//! number of sequential errors
int num_seq_errors;
//! number of RX errors
int num_rx_errors;
//! Number of TX errors
int num_tx_errors;
//! timestamp of current TX
uint64_t tx_current_ts;
//! timestamp of current RX
uint64_t rx_current_ts;
//! number of actual samples transmitted
uint64_t tx_actual_nsamps;
//! number of actual samples received
uint64_t rx_actual_nsamps;
//! number of TX samples
uint64_t tx_nsamps;
//! number of RX samples
uint64_t rx_nsamps;
//! number of TX count
uint64_t tx_count;
//! number of RX count
uint64_t rx_count;
//! timestamp of RX packet
openair0_timestamp rx_timestamp;
} brf_state_t;
......@@ -84,3 +108,4 @@ typedef struct {
*/
int brf_error(int status);
/*@}*/
targets/ARCH/COMMON/common_lib.c
View file @ 33d9e8f2
......@@ -37,31 +37,140 @@
* \warning
*/
#include <stdio.h>
#include <strings.h>
#include <dlfcn.h>
#include <errno.h>
#include <string.h>
#include "common_lib.h"
int set_device(openair0_device *device) {
switch (device->type) {
case EXMIMO_DEV:
printf("[%s] has loaded EXPRESS MIMO device.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
break;
case USRP_B200_DEV:
printf("[%s] has loaded USRP B200 device.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
break;
case USRP_X300_DEV:
printf("[%s] has loaded USRP X300 device.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
break;
case BLADERF_DEV:
printf("[%s] has loaded BLADERF device.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
break;
case LMSSDR_DEV:
printf("[%s] has loaded LMSSDR device.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
break;
case NONE_DEV:
printf("[%s] has not loaded a HW device.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
break;
default:
printf("[%s] invalid HW device.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
return -1;
}
return 0;
}
int set_transport(openair0_device *device) {
switch (device->transp_type) {
case ETHERNET_TP:
printf("[%s] has loaded ETHERNET trasport protocol.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
return 0;
break;
case NONE_TP:
printf("[%s] has not loaded a transport protocol.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
return 0;
break;
default:
printf("[%s] invalid transport protocol.\n",((device->host_type == BBU_HOST) ? "BBU": "RRH"));
return -1;
break;
}
}
int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
/* look for the interface library and load it */
int load_lib(openair0_device *device, openair0_config_t *openair0_cfg, eth_params_t * cfg, uint8_t flag) {
#ifdef ETHERNET
device->type=ETH_IF;
device->func_type = BBU_FUNC;
printf(" openair0_dev_init_eth ...\n");
return(openair0_dev_init_eth(device, openair0_cfg));
#elif EXMIMO
device->type=EXMIMO_IF;
printf("openair0_dev_init_exmimo...\n");
return(openair0_dev_init_exmimo(device, openair0_cfg));
#elif OAI_USRP
device->type=USRP_B200_IF;
printf("openair0_dev_init_usrp ...\n");
return(openair0_dev_init_usrp(device, openair0_cfg));
#elif OAI_BLADERF
device->type=BLADERF_IF;
printf(" openair0_dev_init_bladerf ...\n");
return(openair0_dev_init_bladerf(device, openair0_cfg));
#endif
void *lib_handle;
oai_device_initfunc_t dp ;
oai_transport_initfunc_t tp ;
if (flag == BBU_LOCAL_RADIO_HEAD) {
lib_handle = dlopen(OAI_RF_LIBNAME, RTLD_LAZY);
if (!lib_handle) {
printf( "Unable to locate %s: HW device set to NONE_DEV.\n", OAI_RF_LIBNAME);
return 0;
}
dp = dlsym(lib_handle,"device_init");
if (dp != NULL ) {
dp(device,openair0_cfg);
} else {
fprintf(stderr, "%s %d:oai device intializing function not found %s\n", __FILE__, __LINE__, dlerror());
return -1;
}
} else {
lib_handle = dlopen(OAI_TP_LIBNAME, RTLD_LAZY);
if (!lib_handle) {
printf( "Unable to locate %s: transport protocol set to NONE_TP.\n", OAI_TP_LIBNAME);
return 0;
}
tp = dlsym(lib_handle,"transport_init");
if (tp != NULL ) {
tp(device,openair0_cfg,cfg);
} else {
fprintf(stderr, "%s %d:oai device intializing function not found %s\n", __FILE__, __LINE__, dlerror());
return -1;
}
}
return 0;
}
int openair0_device_load(openair0_device *device, openair0_config_t *openair0_cfg) {
int rc;
//ToDo: EXMIMO harmonization is not complete. That is the reason for this ifdef
#ifdef EXMIMO
device_init(device, openair0_cfg);
#else
rc=load_lib(device, openair0_cfg, NULL,BBU_LOCAL_RADIO_HEAD );
if ( rc >= 0) {
if ( set_device(device) < 0) {
fprintf(stderr, "%s %d:Unsupported radio head\n",__FILE__, __LINE__);
return -1;
}
}
#endif
return 0;
}
int openair0_transport_load(openair0_device *device, openair0_config_t *openair0_cfg, eth_params_t * eth_params) {
int rc;
rc=load_lib(device, openair0_cfg, eth_params, BBU_REMOTE_RADIO_HEAD);
if ( rc >= 0) {
if ( set_transport(device) < 0) {
fprintf(stderr, "%s %d:Unsupported transport protocol\n",__FILE__, __LINE__);
return -1;
}
}
return 0;
}
targets/ARCH/COMMON/common_lib.h
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/ETHERNET/USERSPACE/LIB/eth_raw.c 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/ETHERNET/USERSPACE/LIB/eth_udp.c 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.h
View file @ 33d9e8f2
......@@ -36,6 +36,8 @@
* \note
* \warning
*/
#ifndef ETHERNET_LIB_H
#define ETHERNET_LIB_H
#include <arpa/inet.h>
#include <linux/if_packet.h>
......@@ -47,71 +49,90 @@
#include <net/if.h>
#include <netinet/ether.h>
#define MAX_INST 4
#define DEFAULT_IF "lo"
#define BUF_SIZ 8960 /*Jumbo frame size*/
#define MAX_INST 4
#define DEFAULT_IF "lo"
typedef struct {
#define ETH_RAW_MODE 1
#define ETH_UDP_MODE 0
// opaque eth data struct
//struct eth_if *dev;
// An empty ("") or NULL device identifier will result in the first encountered device being opened (using the first discovered backend)
#define TX_FLAG 1
#define RX_FLAG 0
int sockfd[MAX_INST];
struct sockaddr_in dest_addr[MAX_INST];
#define MAX_PACKET_SEQ_NUM(spp,spf) (spf/spp)
#define MAC_HEADER_SIZE_BYTES (sizeof(struct ether_header))
#define APP_HEADER_SIZE_BYTES (sizeof(int32_t) + sizeof(openair0_timestamp))
#define PAYLOAD_SIZE_BYTES(nsamps) (nsamps<<2)
#define UDP_PACKET_SIZE_BYTES(nsamps) (APP_HEADER_SIZE_BYTES + PAYLOAD_SIZE_BYTES(nsamps))
#define RAW_PACKET_SIZE_BYTES(nsamps) (APP_HEADER_SIZE_BYTES + MAC_HEADER_SIZE_BYTES + PAYLOAD_SIZE_BYTES(nsamps))
unsigned int buffer_size;
unsigned int timeout_ns;
//struct eth_metadata meta_rx;
//struct eth_metadata meta_tx;
unsigned int sample_rate;
// time offset between transmiter timestamp and receiver timestamp;
/*!\brief opaque ethernet data structure */
typedef struct {
/*!\brief socket file desc */
int sockfd[MAX_INST];
/*!\brief interface name */
char *if_name[MAX_INST];
/*!\brief buffer size */
unsigned int buffer_size;
/*!\brief timeout ms */
unsigned int rx_timeout_ms;
/*!\brief timeout ms */
unsigned int tx_timeout_ms;
/*!\brief runtime flags */
uint32_t flags;
/*!\ time offset between transmiter timestamp and receiver timestamp */
double tdiff;
// use brf_time_offset to get this value
int tx_forward_nsamps; //166 for 20Mhz
/*!\ calibration */
int tx_forward_nsamps;
// --------------------------------
// Debug and output control
// --------------------------------
/*!\brief number of I/Q samples to be printed */
int iqdumpcnt;
/*!\brief number of underflows in interface */
int num_underflows;
/*!\brief number of overflows in interface */
int num_overflows;
/*!\brief number of concesutive errors in interface */
int num_seq_errors;
/*!\brief number of errors in interface's receiver */
int num_rx_errors;
/*!\brief umber of errors in interface's transmitter */
int num_tx_errors;
uint64_t tx_actual_nsamps; // actual number of samples transmitted
/*!\brief current TX timestamp */
openair0_timestamp tx_current_ts;
/*!\brief socket file desc */
openair0_timestamp rx_current_ts;
/*!\brief actual number of samples transmitted */
uint64_t tx_actual_nsamps;
/*!\brief actual number of samples received */
uint64_t rx_actual_nsamps;
uint64_t tx_nsamps; // number of planned samples
/*!\brief number of samples to be transmitted */
uint64_t tx_nsamps;
/*!\brief number of samples to be received */
uint64_t rx_nsamps;
uint64_t tx_count; // number pf packets
/*!\brief number of packets transmitted */
uint64_t tx_count;
/*!\brief number of packets received */
uint64_t rx_count;
//openair0_timestamp rx_timestamp;
} eth_state_t;
#define ETH_META_STATUS_OVERRUN (1 << 0)
#define ETH_META_STATUS_UNDERRUN (1 << 1)
struct eth_meta_data{
uint64_t timestamp;
uint32_t flags;
uint32_t status;
unsigned int actual_count;
};
/*!\brief packet header */
typedef struct {
/*!\brief packet sequence number max value=packets per frame*/
uint16_t seq_num ;
/*!\brief antenna port used to resynchronize */
uint16_t antenna_id;
/*!\brief packet's timestamp */
openair0_timestamp timestamp;
/*!\brief variable declared for alignment purposes (sample size=32 bit) */
int16_t not_used;
/*!\brief antenna port used to resynchronize */
int16_t antenna_id;
} header_t;
/*!\brief different options for ethernet tuning in socket and driver level */
......@@ -138,9 +159,37 @@ typedef enum {
MAX_OPT
} eth_opt_t;
/*
#define SND_BUF_SIZE 1
#define RCV_BUF_SIZE 1<<1
#define SND_TIMEOUT 1<<2
#define RCV_TIMEOUT 1<<3
#define MTU_SIZE 1<<4
#define TX_Q_LEN 1<<5
#define RING_PAR 1<<5
#define COALESCE_PAR 1<<6
#define PAUSE_PAR 1<<7
*/
/*!\brief I/Q samples */
typedef struct {
/*!\brief phase */
short i;
/*!\brief quadrature */
short q;
} iqoai_t ;
/*! \fn int ethernet_tune (openair0_device *device, eth_opt_t option)
void dump_packet(char *title, unsigned char* pkt, int bytes, unsigned int tx_rx_flag);
unsigned short calc_csum (unsigned short *buf, int nwords);
void dump_dev(openair0_device *device);
void inline dump_buff(openair0_device *device, char *buff,unsigned int tx_rx_flag,int nsamps);
void inline dump_rxcounters(openair0_device *device);
void inline dump_txcounters(openair0_device *device);
void dump_iqs(char * buff, int iq_cnt);
/*! \fn int ethernet_tune (openair0_device *device, unsigned int option, int value);
* \brief this function allows you to configure certain ethernet parameters in socket or device level
* \param[in] openair0 device which bears the socket
* \param[in] name of parameter to configure
......@@ -148,6 +197,37 @@ typedef enum {
* \note
* @ingroup _oai
*/
int ethernet_tune (openair0_device *device, eth_opt_t option);
int ethernet_write_data(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps,int cc) ;
int ethernet_read_data(openair0_device *device,openair0_timestamp *timestamp,void **buff, int nsamps,int cc);
int ethernet_tune(openair0_device *device, unsigned int option, int value);
/*! \fn int eth_socket_init_udp(openair0_device *device)
* \brief initialization of UDP Socket to communicate with one destination
* \param[in] *device openair device for which the socket will be created
* \param[out]
* \return 0 on success, otherwise -1
* \note
* @ingroup _oai
*/
int eth_socket_init_udp(openair0_device *device);
int trx_eth_write_udp(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps,int cc, int flags);
int trx_eth_read_udp(openair0_device *device, openair0_timestamp *timestamp, void **buff, int nsamps, int cc);
int eth_get_dev_conf_udp(openair0_device *device);
/*! \fn static int eth_set_dev_conf_udp(openair0_device *device)
* \brief
* \param[in] *device openair device
* \param[out]
* \return 0 on success, otherwise -1
* \note
* @ingroup _oai
*/
int eth_set_dev_conf_udp(openair0_device *device);
int eth_socket_init_raw(openair0_device *device);
int trx_eth_write_raw(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps,int cc, int flags);
int trx_eth_read_raw(openair0_device *device, openair0_timestamp *timestamp, void **buff, int nsamps, int cc);
int eth_get_dev_conf_raw(openair0_device *device);
int eth_set_dev_conf_raw(openair0_device *device);
#endif
targets/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
View file @ 33d9e8f2
......@@ -247,7 +247,7 @@ int openair0_stop_without_reset(int card)
#define MY_RF_MODE (RXEN + TXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX + DMAMODE_TX)
#define RF_MODE_BASE (LNA1ON + RFBBNORM)
int openair0_dev_init_exmimo(openair0_device *device, openair0_config_t *openair0_cfg) {
int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
// Initialize card
// exmimo_config_t *p_exmimo_config;
......@@ -287,6 +287,8 @@ int openair0_dev_init_exmimo(openair0_device *device, openair0_config_t *openair
return(-1);
}
device->type = EXMIMO_DEV;
return(0);
}
......@@ -323,6 +325,12 @@ int openair0_config(openair0_config_t *openair0_cfg, int UE_flag)
else
p_exmimo_config->framing.multicard_syncmode=SYNCMODE_SLAVE;
/* device specific */
openair0_cfg[card].txlaunch_wait = 1;//manage when TX processing is triggered
openair0_cfg[card].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
openair0_cfg[card].iq_txshift = 4;//shift
openair0_cfg[card].iq_rxrescale = 15;//rescale iqs
if (openair0_cfg[card].sample_rate==30.72e6) {
resampling_factor = 0;
rx_filter = RXLPF10;
......
targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/CMakeLists.txt 0 → 100644
View file @ 33d9e8f2
set(si5351_src_files
Si5351C.cpp
)
set(CMAKE_CXX_FLAGS
"${CMAKE_CXX_FLAGS} ${C_FLAGS_PROCESSOR} -std=c++11 "
)
add_library(Si5351C STATIC ${si5351_src_files})
target_include_directories(Si5351C PUBLIC ../lms7002m ${CMAKE_CURRENT_SOURCE_DIR})
target_link_libraries(Si5351C LMS7002M)
targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.cpp 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/Si5351C/Si5351C.h 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/CMakeLists.txt 0 → 100644
View file @ 33d9e8f2
cmake_minimum_required(VERSION 2.8)
set(CMAKE_CONFIGURATION_TYPES "Debug;Release" CACHE TYPE INTERNAL FORCE)
project("lms7api")
#include modules for finding FFTW and CyAPI
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/cmake/Modules/")
cmake_policy(SET CMP0015 OLD)
if(${CMAKE_MAJOR_VERSION} GREATER 2)
cmake_policy(SET CMP0043 NEW)
endif()
ADD_DEFINITIONS(-D_CRT_SECURE_NO_WARNINGS)
if(CMAKE_COMPILER_IS_GNUCXX)
SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++0x")
endif()
# set up include-directories
include_directories(
"${PROJECT_SOURCE_DIR}"
"${PROJECT_BINARY_DIR}"
cpp-feather-ini-parser
)
set(LMS7002M_src_files
LMS7002M.cpp
LMS7002M_parameters.cpp
LMS7002M_statuses.cpp
LMS7002M_filtersCalibration.cpp
lmsComms.cpp
LMS7002M_RegistersMap.cpp
)
set(ENABLE_USB_CONNECTION "YES" CACHE BOOL INTERNAL)
set(ENABLE_SPI_CONNECTION "NO" CACHE BOOL INTERNAL)
set(CONNECTION_MANAGER_DIR connectionManager)
set(connectionManager_src_files
${CONNECTION_MANAGER_DIR}/ConnectionManager.cpp
${CONNECTION_MANAGER_DIR}/ConnectionCOM.cpp
${CONNECTION_MANAGER_DIR}/ConnectionManager.h
${CONNECTION_MANAGER_DIR}/ConnectionCOM.h
)
if(ENABLE_USB_CONNECTION)
list(APPEND connectionManager_src_files ${CONNECTION_MANAGER_DIR}/ConnectionUSB.cpp ${CONNECTION_MANAGER_DIR}/ConnectionUSB.h)
add_definitions(-DENABLE_USB_CONNECTION)
endif()
if(ENABLE_SPI_CONNECTION)
list(APPEND connectionManager_src_files ${CONNECTION_MANAGER_DIR}/ConnectionSPI.cpp ${CONNECTION_MANAGER_DIR}/ConnectionSPI.h)
add_definitions(-DENABLE_SPI_CONNECTION)
endif()
add_library(LMS7002M STATIC ${LMS7002M_src_files} ${connectionManager_src_files})
target_include_directories(LMS7002M PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
if(WIN32 AND ENABLE_USB_CONNECTION)
find_package(CyAPI REQUIRED)
LINK_DIRECTORIES(${CYAPI_LIBRARIES})
include_directories(${CYAPI_INCLUDE_DIRS})
set(CONNECTION_MANAGER_LIBS ${CYAPI_LIBRARIES} SetupAPI)
target_link_libraries(LMS7002M ${CONNECTION_MANAGER_LIBS})
endif()
if(UNIX AND ENABLE_USB_CONNECTION)
set(CONNECTION_MANAGER_LIBS usb-1.0 -lpthread)
target_link_libraries(LMS7002M ${CONNECTION_MANAGER_LIBS})
endif()
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M.cpp 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M.h 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/LMS7002M_statuses.h 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lms7002_defines.h 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.cpp 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/lmsComms.h 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms7002m/typedefs.h 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/CMakeLists.txt 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.cpp 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/LMS_SDR.h 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/dataTypes.h 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/fifo.h 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/ringBuffer.h 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/USERSPACE/LIB/sodera_lib.cpp 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/ARCH/LMSSDR/enb_sodera_highband_5MHz_rx19dB_txfull.ini 0 → 100644
View file @ 33d9e8f2
This diff is collapsed.
targets/DOCS/Doxyfile
View file @ 33d9e8f2
This diff is collapsed.
targets/RT/USER/UE_transport_IQ.c
View file @ 33d9e8f2
This diff is collapsed.
targets/RT/USER/eNB_transport_IQ.c
View file @ 33d9e8f2
This diff is collapsed.
targets/RT/USER/lte-softmodem.c
View file @ 33d9e8f2
This diff is collapsed.
targets/RT/USER/lte-ue.c
View file @ 33d9e8f2
This diff is collapsed.
targets/RT/USER/rrh.gtkw
View file @ 33d9e8f2
This diff is collapsed.
targets/RT/USER/rrh_gw.c
View file @ 33d9e8f2
This diff is collapsed.
targets/RT/USER/rrh_gw_externs.h
View file @ 33d9e8f2
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment