Skip to content

O
OpenXG-RAN
Commit 76273a2a authored by Sakthivel Velumani's avatar Sakthivel Velumani
Browse files
Options

Merge branch 'ue-dci-false-detection' into ue-pdsch-pusch-parallel

parents 2738f766 e1e459d2
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 7731 additions and 2614 deletions
ci-scripts/Jenkinsfile-GitLab-Container 0 → 100644
View file @ 76273a2a
#!/bin/groovy
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
// Location of the executor node
def nodeExecutor = params.nodeExecutor
// Tags to shorten pipeline duration
def doMandatoryTests = false
def doFullTestsuite = false
pipeline {
agent {
label nodeExecutor
}
options {
disableConcurrentBuilds()
timestamps()
gitLabConnection('OAI GitLab')
ansiColor('xterm')
}
stages {
stage ("Verify Parameters") {
steps {
script {
JOB_TIMESTAMP = sh returnStdout: true, script: 'date --utc --rfc-3339=seconds | sed -e "s#+00:00##"'
JOB_TIMESTAMP = JOB_TIMESTAMP.trim()
echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
def allParametersPresent = true
echo '\u2705 \u001B[32mVerify Labels\u001B[0m'
if ("MERGE".equals(env.gitlabActionType)) {
LABEL_CHECK = sh returnStdout: true, script: 'ci-scripts/checkGitLabMergeRequestLabels.sh --mr-id ' + env.gitlabMergeRequestIid
LABEL_CHECK = LABEL_CHECK.trim()
if (LABEL_CHECK == 'NONE') {
def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Your merge request has none of the mandatory labels:\n\n"
message += " - BUILD-ONLY\n"
message += " - 4G-LTE\n"
message += " - 5G-NR\n"
message += " - CI\n\n"
message += "Not performing CI due to lack of labels"
addGitLabMRComment comment: message
error('Not performing CI due to lack of labels')
} else if (LABEL_CHECK == 'FULL') {
doMandatoryTests = true
doFullTestsuite = true
} else if (LABEL_CHECK == 'SHORTEN-5G') {
doMandatoryTests = true
} else {
def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): We will perform only build stages on your Merge Request"
addGitLabMRComment comment: message
}
} else {
doMandatoryTests = true
doFullTestsuite = true
}
}
}
}
stage ("Verify Guidelines") {
steps {
echo "Git URL is ${GIT_URL}"
echo "GitLab Act is ${env.gitlabActionType}"
script {
if ("MERGE".equals(env.gitlabActionType)) {
// since a bit, in push events, gitlabUserEmail is not populated
gitCommitAuthorEmailAddr = env.gitlabUserEmail
echo "GitLab Usermail is ${gitCommitAuthorEmailAddr}"
// GitLab-Jenkins plugin integration is lacking to perform the merge by itself
// Doing it manually --> it may have merge conflicts
sh "./ci-scripts/doGitLabMerge.sh --src-branch ${env.gitlabSourceBranch} --src-commit ${env.gitlabMergeRequestLastCommit} --target-branch ${env.gitlabTargetBranch} --target-commit ${GIT_COMMIT}"
} else {
echo "Git Branch is ${GIT_BRANCH}"
echo "Git Commit is ${GIT_COMMIT}"
// since a bit, in push events, gitlabUserEmail is not populated
gitCommitAuthorEmailAddr = sh returnStdout: true, script: 'git log -n1 --pretty=format:%ae ${GIT_COMMIT}'
gitCommitAuthorEmailAddr = gitCommitAuthorEmailAddr.trim()
echo "GitLab Usermail is ${gitCommitAuthorEmailAddr}"
sh "git log -n1 --pretty=format:\"%s\" > .git/CI_COMMIT_MSG"
}
}
}
post {
failure {
script {
def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): Merge Conflicts -- Cannot perform CI"
addGitLabMRComment comment: message
currentBuild.result = 'FAILURE'
}
}
}
}
// Build Stages are Mandatory
// Later we will add a Ubuntu20 build
stage ("Image Building Processes") {
parallel {
stage ("Ubuntu18 Build") {
steps {
script {
triggerSlaveJob ('RAN-Ubuntu18-Image-Builder', 'Ubuntu18-Images-Build')
}
}
post {
always {
script {
finalizeSlaveJob('RAN-Ubuntu18-Image-Builder')
}
}
failure {
script {
currentBuild.result = 'FAILURE'
}
}
}
}
stage ("RHEL8 Build") {
steps {
script {
triggerSlaveJob ('RAN-RHEL8-Image-Builder', 'RHEL8-Images-Build')
}
}
post {
always {
script {
finalizeSlaveJob('RAN-RHEL8-Image-Builder')
}
}
failure {
script {
currentBuild.result = 'FAILURE'
}
}
}
}
}
}
}
post {
always {
script {
emailext attachmentsPattern: '*results*.html',
body: '''Hi,
Here are attached HTML report files for $PROJECT_NAME - Build # $BUILD_NUMBER - $BUILD_STATUS!
Regards,
OAI CI Team''',
replyTo: 'no-reply@openairinterface.org',
subject: '$PROJECT_NAME - Build # $BUILD_NUMBER - $BUILD_STATUS!',
to: gitCommitAuthorEmailAddr
if (fileExists('.git/CI_COMMIT_MSG')) {
sh "rm -f .git/CI_COMMIT_MSG"
}
}
}
success {
script {
def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): passed (" + BUILD_URL + ")"
if ("MERGE".equals(env.gitlabActionType)) {
echo "This is a MERGE event"
addGitLabMRComment comment: message
}
}
}
failure {
script {
def message = "OAI " + JOB_NAME + " build (" + BUILD_ID + "): failed (" + BUILD_URL + ")"
if ("MERGE".equals(env.gitlabActionType)) {
echo "This is a MERGE event"
addGitLabMRComment comment: message
}
}
}
}
}
// ---- Slave Job functions
def triggerSlaveJob (jobName, gitlabStatusName) {
// Workaround for the "cancelled" GitLab pipeline notification
// The slave job is triggered with the propagate false so the following commands are executed
// Its status is now PASS/SUCCESS from a stage pipeline point of view
// localStatus variable MUST be analyzed to properly assess the status
localStatus = build job: jobName,
parameters: [
string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
booleanParam(name: 'eNB_mergeRequest', value: "MERGE".equals(env.gitlabActionType)),
string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
], propagate: false
localResult = localStatus.getResult()
echo "${jobName} Slave Job status is ${localResult}"
gitlabCommitStatus(name: gitlabStatusName) {
if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
echo "${jobName} Slave Job is OK"
} else {
echo "${jobName} Slave Job is KO"
sh "ci-scripts/fail.sh"
}
}
}
def triggerSlaveJobNoGitLab (jobName) {
// Workaround for the "cancelled" GitLab pipeline notification
// The slave job is triggered with the propagate false so the following commands are executed
// Its status is now PASS/SUCCESS from a stage pipeline point of view
// localStatus variable MUST be analyzed to properly assess the status
localStatus = build job: jobName,
parameters: [
string(name: 'eNB_Repository', value: String.valueOf(GIT_URL)),
string(name: 'eNB_Branch', value: String.valueOf(env.gitlabSourceBranch)),
string(name: 'eNB_CommitID', value: String.valueOf(env.gitlabMergeRequestLastCommit)),
booleanParam(name: 'eNB_mergeRequest', value: "MERGE".equals(env.gitlabActionType)),
string(name: 'eNB_TargetBranch', value: String.valueOf(env.gitlabTargetBranch))
], propagate: false
localResult = localStatus.getResult()
echo "${jobName} Slave Job status is ${localResult}"
if (localStatus.resultIsBetterOrEqualTo('SUCCESS')) {
echo "${jobName} Slave Job is OK"
} else {
echo "${jobName} Slave Job is KO"
sh "ci-scripts/fail.sh"
}
}
def finalizeSlaveJob(jobName) {
// In case of any non-success, we are retrieving the HTML report of the last completed
// slave job. The only drop-back is that we may retrieve the HTML report of a previous build
fileName = "test_results-${jobName}.html"
if (!fileExists(fileName)) {
copyArtifacts(projectName: jobName,
filter: 'test_results*.html',
selector: lastCompleted())
if (fileExists(fileName)) {
sh "sed -i -e 's#TEMPLATE_BUILD_TIME#${JOB_TIMESTAMP}#' ${fileName}"
archiveArtifacts artifacts: fileName
}
}
}
ci-scripts/Jenkinsfile-tmp-multi-enb-benetel 0 → 100644
View file @ 76273a2a
This diff is collapsed.
ci-scripts/Jenkinsfile-tmp-multi-enb-nsa
View file @ 76273a2a
......@@ -34,15 +34,16 @@ def buildStageStatus = true
def testStageName = params.pipelineTestStageName
// Name of the phone resource
def ciSmartPhoneResource1 = params.smartphonesResource1
def ciSmartPhoneResource2 = params.smartphonesResource2
def ciSmartPhonesResource1 = params.SmartPhonesResource1
def ciSmartPhonesResource2 = params.SmartPhonesResource2
def ciSmartPhonesResource3 = params.SmartPhonesResource3
// Global Parameters. Normally they should be populated when the master job
// triggers the slave job with parameters
def eNB_Repository
def eNB_Branch
def eNB_CommitID
def eNB_AllowMergeRequestProcess = false
def eNB_AllowMergeRequestProcess
def eNB_TargetBranch
pipeline {
......@@ -52,7 +53,7 @@ pipeline {
options {
disableConcurrentBuilds()
ansiColor('xterm')
lock(extra: [[resource: ciSmartPhoneResource2]], resource: ciSmartPhoneResource1)
lock(extra: [[resource: ciSmartPhonesResource2],[resource: ciSmartPhonesResource3]], resource: ciSmartPhonesResource1)
}
stages {
stage("Build Init") {
......@@ -78,10 +79,13 @@ pipeline {
testStageName = 'Template Test Stage'
}
if (params.smartphonesResource1 == null) {
if (params.SmartPhonesResource1 == null) {
allParametersPresent = false
}
if (params.smartphonesResource2 == null) {
if (params.SmartPhonesResource2 == null) {
allParametersPresent = false
}
if (params.SmartPhonesResource3== null) {
allParametersPresent = false
}
// 1st eNB parameters
......@@ -134,8 +138,8 @@ pipeline {
eNB_CommitID = params.eNB_CommitID
}
echo "eNB_CommitID : ${eNB_CommitID}"
if (params.eNB_mergeRequest != null) {
eNB_AllowMergeRequestProcess = params.eNB_mergeRequest
if (params.eNB_AllowMergeRequestProcess!= null) {
eNB_AllowMergeRequestProcess = params.eNB_AllowMergeRequestProcess
if (eNB_AllowMergeRequestProcess) {
if (params.eNB_TargetBranch != null) {
eNB_TargetBranch = params.eNB_TargetBranch
......
ci-scripts/Jenkinsfile-tmp-ran
View file @ 76273a2a
......@@ -241,6 +241,10 @@ pipeline {
stage ("Terminate") {
parallel {
stage('Terminate UE') {
// Bypassing this stage if there are no abd server defined
when {
expression { params.ADB_IPAddress != "none" }
}
steps {
echo '\u2705 \u001B[32mTerminate UE\u001B[0m'
withCredentials([
......@@ -275,6 +279,10 @@ pipeline {
}
}
stage('Terminate SPGW') {
// Bypassing this stage if EPC server is not defined
when {
expression { params.EPC_IPAddress != "none" }
}
steps {
echo '\u2705 \u001B[32mTerminate SPGW\u001B[0m'
withCredentials([
......@@ -292,6 +300,10 @@ pipeline {
}
}
stage('Terminate MME') {
// Bypassing this stage if EPC server is not defined
when {
expression { params.EPC_IPAddress != "none" }
}
steps {
echo '\u2705 \u001B[32mTerminate MME\u001B[0m'
withCredentials([
......@@ -309,6 +321,10 @@ pipeline {
}
}
stage('Terminate HSS') {
// Bypassing this stage if EPC server is not defined
when {
expression { params.EPC_IPAddress != "none" }
}
steps {
echo '\u2705 \u001B[32mTerminate HSS\u001B[0m'
withCredentials([
......@@ -371,6 +387,10 @@ pipeline {
}
}
stage('Log Collection (SPGW)') {
// Bypassing this stage if EPC server is not defined
when {
expression { params.EPC_IPAddress != "none" }
}
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
......@@ -389,6 +409,10 @@ pipeline {
}
}
stage('Log Collection (MME)') {
// Bypassing this stage if EPC server is not defined
when {
expression { params.EPC_IPAddress != "none" }
}
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
......@@ -407,6 +431,10 @@ pipeline {
}
}
stage('Log Collection (HSS)') {
// Bypassing this stage if EPC server is not defined
when {
expression { params.EPC_IPAddress != "none" }
}
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
......@@ -425,6 +453,10 @@ pipeline {
}
}
stage('Log Collection (Ping)') {
// Bypassing this stage if EPC server is not defined
when {
expression { params.EPC_IPAddress != "none" }
}
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
......@@ -443,6 +475,10 @@ pipeline {
}
}
stage('Log Collection (Iperf)') {
// Bypassing this stage if EPC server is not defined
when {
expression { params.EPC_IPAddress != "none" }
}
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
......@@ -482,7 +518,7 @@ pipeline {
// Making sure that we really shutdown every thing before leaving
failure {
script {
if (!termStatusArray[termUE]) {
if ((!termStatusArray[termUE]) && (params.ADB_IPAddress != "none")) {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
]) {
......@@ -496,21 +532,21 @@ pipeline {
sh "python3 ci-scripts/main.py --mode=TerminateeNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
}
}
if (!termStatusArray[termSPGW]) {
if ((!termStatusArray[termSPGW]) && (params.EPC_IPAddress != "none")) {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
sh "python3 ci-scripts/main.py --mode=TerminateSPGW --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
}
}
if (!termStatusArray[termMME]) {
if ((!termStatusArray[termMME]) && (params.EPC_IPAddress != "none")) {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
sh "python3 ci-scripts/main.py --mode=TerminateMME --EPCIPAddress=${params.EPC_IPAddress} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCType=${params.EPC_Type} --EPCSourceCodePath=${params.EPC_SourceCodePath}"
}
}
if (!termStatusArray[termHSS]) {
if ((!termStatusArray[termHSS]) && (params.EPC_IPAddress != "none")) {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password']
]) {
......
ci-scripts/Jenkinsfile-trig-nsa
View file @ 76273a2a
......@@ -25,28 +25,43 @@
// Location of the python executor node shall be in the same subnet as the others servers
def pythonExecutor = params.pythonExecutor
def TARGET_BRANCH = "develop"
def ALLOW_MERGE = true
pipeline {
agent {
label pythonExecutor
}
stages {
stage ("NSA Test Loop") {
stage ("Launcher") {
steps {
script {
script {
//retrieve MR that are opened nd with tag READY_TO_BE_MERGED
MR_LIST= sh returnStdout: true, script: 'curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests?state=opened&per_page=100&labels=READY_TO_BE_MERGED" | jq ".[].iid" || true '
echo "List of selected MR:\n${MR_LIST}"
def MR_ARRAY = MR_LIST.split('\n')
def MR_ARRAY = MR_LIST.split('\n')
//for every selected MR, retrieve the branch name and the latest commit
for (MR in MR_ARRAY) {
SRC_BRANCH=sh returnStdout: true, script: """curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/${MR}" | jq ".source_branch" || true """
SRC_BRANCH=SRC_BRANCH.trim()
COMMIT_ID=sh returnStdout: true, script: """curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/${MR}" | jq ".sha" || true """
COMMIT_ID=COMMIT_ID.trim()
echo "Testing NSA on : ${MR} ${SRC_BRANCH} ${COMMIT_ID}"
//calling sub job
//calling NSA sub job
build job: "RAN-CI-NSA-B210", wait : false, propagate : false, parameters: [
string(name: 'eNB_MR', value: String.valueOf(MR)),
string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)),
string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID))
string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)),
string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)),
booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE))
]
//calling Benetel sub job
build job: "RAN-CI-BENETEL", wait : false, propagate : false, parameters: [
string(name: 'eNB_MR', value: String.valueOf(MR)),
string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)),
string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)),
string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)),
booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE))
]
}
}
......
ci-scripts/cls_containerize.py
View file @ 76273a2a
This diff is collapsed.
ci-scripts/conf_files/benetel-4g.conf 0 → 100644
View file @ 76273a2a
This diff is collapsed.
ci-scripts/conf_files/benetel-5g.conf 0 → 100644
View file @ 76273a2a
This diff is collapsed.
ci-scripts/conf_files/gnb.band78.tm1.106PRB.usrpn300.conf
View file @ 76273a2a
......@@ -23,6 +23,7 @@ gNBs =
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
......@@ -46,7 +47,7 @@ gNBs =
#initialDownlinkBWP
#genericParameters
# this is RBstart=41,L=24 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6366;
initialDLBWPlocationAndBandwidth = 6368;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
......@@ -89,7 +90,7 @@ gNBs =
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 6366;
initialULBWPlocationAndBandwidth = 6368;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
......@@ -240,7 +241,7 @@ L1s = (
RUs = (
{
local_rf = "yes"
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
......@@ -249,12 +250,12 @@ RUs = (
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
## beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
##beamforming 1x4 matrix: 1 layer x 4 antennas
## beamforming 1x4 matrix: 1 layer x 4 antennas
#bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
## beamforming 2x2 matrix:
# bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
#bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
## beamforming 4x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
......
ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf
View file @ 76273a2a
......@@ -48,7 +48,7 @@ gNBs =
#initialDownlinkBWP
#genericParameters
# this is RBstart=84,L=13 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6366; //28875; //6366; #6407; #3384;
initialDLBWPlocationAndBandwidth = 6368;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
......@@ -90,7 +90,7 @@ gNBs =
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 6366; //28875; //6366; #6407; #3384;
initialULBWPlocationAndBandwidth = 6368;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
......
ci-scripts/docker_log_split.py 0 → 100644
View file @ 76273a2a
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
# Python for CI of OAI-eNB + COTS-UE
#
# Required Python Version
# Python 3.x
#
# Required Python Package
# pexpect
#---------------------------------------------------------------------
#-----------------------------------------------------------
# Import Libs
#-----------------------------------------------------------
import sys # arg
import re # reg
import os
import subprocess
class SplitReport():
def __init__(self):
self.logfilename = ''
self.destinationFolder = ''
def split(self):
self.destinationFolder = self.logfilename.replace(".log","")
if os.path.isfile(self.logfilename):
newImageLog = open(self.logfilename + '.new', 'w')
copyFlag = True
with open(self.logfilename, 'r') as imageLog:
for line in imageLog:
header = False
ret = re.search('====== Start of log for ([0-9\.A-Za-z\-\_]+) ======', line)
if ret is not None:
copyFlag = False
header = True
detailedLogFile = open(self.destinationFolder + '/' + ret.group(1), 'w')
if copyFlag:
newImageLog.write(line)
ret = re.search('====== End of log for ([0-9\.A-Za-z\-\_]+) ======', line)
if ret is not None:
copyFlag = True
detailedLogFile.close()
elif not copyFlag and not header:
detailedLogFile.write(line)
imageLog.close()
newImageLog.close()
os.rename(self.logfilename + '.new', self.logfilename)
else:
print('Cannot split unfound file')
#--------------------------------------------------------------------------------------------------------
#
# Start of main
#
#--------------------------------------------------------------------------------------------------------
argvs = sys.argv
argc = len(argvs)
SP = SplitReport()
while len(argvs) > 1:
myArgv = argvs.pop(1)
if re.match('^\-\-logfilename=(.+)$', myArgv, re.IGNORECASE):
matchReg = re.match('^\-\-logfilename=(.+)$', myArgv, re.IGNORECASE)
SP.logfilename = matchReg.group(1)
SP.split()
sys.exit(0)
ci-scripts/ran.py
View file @ 76273a2a
......@@ -239,6 +239,7 @@ class RANManagement():
while (count > 0) and buildOAIprocess:
mySSH.command('ps aux | grep --color=never build_ | grep -v grep', '\$', 6)
result = re.search('build_oai', mySSH.getBefore())
print(result)
if result is None:
buildOAIprocess = False
else:
......@@ -464,7 +465,7 @@ class RANManagement():
self.prematureExit = True
return
else:
mySSH.command('stdbuf -o0 cat enb_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync|Starting"', '\$', 4)
mySSH.command('stdbuf -o0 cat enb_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync|Starting|Started"', '\$', 4)
if rruCheck:
result = re.search('wait RUs', mySSH.getBefore())
else:
......
ci-scripts/xml_files/benetel_multi_node_build.xml 0 → 100644
View file @ 76273a2a
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>build-tab</htmlTabRef>
<htmlTabName>Build</htmlTabName>
<htmlTabIcon>wrench</htmlTabIcon>
<TestCaseRequestedList>
000001 000002
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="000001">
<class>Build_eNB</class>
<desc>Build eNB</desc>
<Build_eNB_args>--eNB -t benetel4g -w None</Build_eNB_args>
<forced_workspace_cleanup>True</forced_workspace_cleanup>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
</testCase>
<testCase id="000002">
<class>Build_eNB</class>
<desc>Build gNB</desc>
<Build_eNB_args>--gNB -t benetel5g -w None</Build_eNB_args>
<forced_workspace_cleanup>True</forced_workspace_cleanup>
<eNB_instance>1</eNB_instance>
<eNB_serverId>1</eNB_serverId>
</testCase>
</testCaseList>
ci-scripts/xml_files/benetel_nsa_base.xml 0 → 100644
View file @ 76273a2a
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>TEST-FR1-TM1</htmlTabRef>
<htmlTabName>FR1</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<TestCaseRequestedList>
010000
030000
040000
010001
000001
050000
050001
000001
060000
060001
000001
070000
070001
010002
000001
080001
080000
010003
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="010000">
<class>Initialize_UE</class>
<desc>Initialize UE</desc>
</testCase>
<testCase id="010003">
<class>Terminate_UE</class>
<desc>Terminate UE</desc>
</testCase>
<testCase id="010001">
<class>Attach_UE</class>
<desc>Attach UE</desc>
</testCase>
<testCase id="010002">
<class>Detach_UE</class>
<desc>Detach UE</desc>
</testCase>
<testCase id="030000">
<class>Initialize_eNB</class>
<desc>Initialize eNB</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/benetel-4g.conf</Initialize_eNB_args>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<air_interface>lte</air_interface>
</testCase>
<testCase id="040000">
<class>Initialize_eNB</class>
<desc>Initialize gNB</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/benetel-5g.conf</Initialize_eNB_args>
<eNB_instance>1</eNB_instance>
<eNB_serverId>1</eNB_serverId>
<air_interface>nr</air_interface>
</testCase>
<testCase id="000001">
<class>IdleSleep</class>
<desc>Sleep</desc>
<idle_sleep_time_in_sec>20</idle_sleep_time_in_sec>
</testCase>
<testCase id="050000">
<class>Ping</class>
<desc>Ping: 20pings in 20sec</desc>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>50</ping_packetloss_threshold>
</testCase>
<testCase id="050001">
<class>Ping</class>
<desc>Ping: 100pings in 20sec</desc>
<ping_args>-c 100 -i 0.2</ping_args>
<ping_packetloss_threshold>50</ping_packetloss_threshold>
</testCase>
<testCase id="060000">
<class>Iperf</class>
<desc>iperf (DL/2.5Mbps/UDP)(60 sec)(single-ue profile)</desc>
<iperf_args>-u -b 2.5M -t 60 -i 1</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="060001">
<class>Iperf</class>
<desc>iperf (UL/1.5Mbps/UDP)(60 sec)(single-ue profile)</desc>
<iperf_args>-u -b 1.5M -t 60 -i 1 -R</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="070000">
<class>Iperf</class>
<desc>iperf (DL/20Mbps/UDP)(20 sec)(single-ue profile)</desc>
<iperf_args>-u -b 20M -t 20 -i 1</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="070001">
<class>Iperf</class>
<desc>iperf (UL/3Mbps/UDP)(20 sec)(single-ue profile)</desc>
<iperf_args>-u -b 3M -t 20 -i 1 -R</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="080000">
<class>Terminate_eNB</class>
<desc>Terminate eNB</desc>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<air_interface>lte</air_interface>
</testCase>
<testCase id="080001">
<class>Terminate_eNB</class>
<desc>Terminate gNB</desc>
<eNB_instance>1</eNB_instance>
<eNB_serverId>1</eNB_serverId>
<air_interface>nr</air_interface>
</testCase>
</testCaseList>
ci-scripts/xml_files/fr1_image_build.xml → ci-scripts/xml_files/container_image_build.xml
View file @ 76273a2a
......@@ -22,7 +22,7 @@
-->
<testCaseList>
<htmlTabRef>build-tab</htmlTabRef>
<htmlTabName>Build</htmlTabName>
<htmlTabName>Build Container Images</htmlTabName>
<htmlTabIcon>wrench</htmlTabIcon>
<TestCaseRequestedList>
000001
......@@ -31,7 +31,7 @@
<testCase id="000001">
<class>Build_Image</class>
<desc>Build eNB Image</desc>
<desc>Build all Images</desc>
<kind>all</kind>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
......
ci-scripts/xml_files/fr1_multi_node_build.xml
View file @ 76273a2a
......@@ -37,6 +37,7 @@
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<backgroundBuild>True</backgroundBuild>
<forced_workspace_cleanup>True</forced_workspace_cleanup>
</testCase>
<testCase id="000004">
......@@ -53,6 +54,7 @@
<eNB_instance>1</eNB_instance>
<eNB_serverId>1</eNB_serverId>
<backgroundBuild>True</backgroundBuild>
<forced_workspace_cleanup>True</forced_workspace_cleanup>
</testCase>
<testCase id="000003">
......
ci-scripts/xml_files/fr1_nsa_base.xml
View file @ 76273a2a
......@@ -21,8 +21,8 @@
-->
<testCaseList>
<htmlTabRef>TEST-FR1-TM1</htmlTabRef>
<htmlTabName>FR1</htmlTabName>
<htmlTabRef>TEST-NSA-FR1-TM1</htmlTabRef>
<htmlTabName>NSA FULL</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<TestCaseRequestedList>
010000
......
ci-scripts/xml_files/fr1_nsa_base_ref.xml 0 → 100644
View file @ 76273a2a
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>TEST-NSA-FR1-TM1</htmlTabRef>
<htmlTabName>NSA FULL</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<TestCaseRequestedList>
010000
030000
040000
010001
000001
050000
050001
000001
060000
060001
000001
070000
010002
000001
080001
080000
010003
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="010000">
<class>Initialize_UE</class>
<desc>Initialize UE</desc>
</testCase>
<testCase id="010003">
<class>Terminate_UE</class>
<desc>Terminate UE</desc>
</testCase>
<testCase id="010001">
<class>Attach_UE</class>
<desc>Attach UE</desc>
</testCase>
<testCase id="010002">
<class>Detach_UE</class>
<desc>Detach UE</desc>
</testCase>
<testCase id="030000">
<class>Initialize_eNB</class>
<desc>Initialize eNB</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.fr1.25PRB.usrpb210.conf</Initialize_eNB_args>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<air_interface>lte</air_interface>
</testCase>
<testCase id="040000">
<class>Initialize_eNB</class>
<desc>Initialize gNB</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf -E</Initialize_eNB_args>
<eNB_instance>1</eNB_instance>
<eNB_serverId>1</eNB_serverId>
<air_interface>nr</air_interface>
</testCase>
<testCase id="000001">
<class>IdleSleep</class>
<desc>Sleep</desc>
<idle_sleep_time_in_sec>20</idle_sleep_time_in_sec>
</testCase>
<testCase id="050000">
<class>Ping</class>
<desc>Ping: 20pings in 20sec</desc>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>50</ping_packetloss_threshold>
</testCase>
<testCase id="050001">
<class>Ping</class>
<desc>Ping: 100pings in 20sec</desc>
<ping_args>-c 100 -i 0.2</ping_args>
<ping_packetloss_threshold>50</ping_packetloss_threshold>
</testCase>
<testCase id="060000">
<class>Iperf</class>
<desc>iperf (DL/3Mbps/UDP)(20 sec)(single-ue profile)</desc>
<iperf_args>-u -b 3M -t 20 -i 1</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="060001">
<class>Iperf</class>
<desc>iperf (UL/1Mbps/UDP)(20 sec)(single-ue profile)</desc>
<iperf_args>-u -b 1M -t 20 -i 1 -R</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="070000">
<class>Iperf</class>
<desc>iperf (DL/20Mbps/UDP)(20 sec)(single-ue profile)</desc>
<iperf_args>-u -b 20M -t 20 -i 1</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="070001">
<class>Iperf</class>
<desc>iperf (UL/3Mbps/UDP)(20 sec)(single-ue profile)</desc>
<iperf_args>-u -b 3M -t 20 -i 1 -R</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="080000">
<class>Terminate_eNB</class>
<desc>Terminate eNB</desc>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<air_interface>lte</air_interface>
</testCase>
<testCase id="080001">
<class>Terminate_eNB</class>
<desc>Terminate gNB</desc>
<eNB_instance>1</eNB_instance>
<eNB_serverId>1</eNB_serverId>
<air_interface>nr</air_interface>
</testCase>
</testCaseList>
cmake_targets/CMakeLists.txt
View file @ 76273a2a
......@@ -832,7 +832,7 @@ add_library(F1AP
# Hardware dependant options
###################################
add_list1_option(NB_ANTENNAS_RX "2" "Number of antennas in reception" "1" "2" "4")
add_list1_option(NB_ANTENNAS_RX "4" "Number of antennas in reception" "1" "2" "4")
add_list1_option(NB_ANTENNAS_TX "4" "Number of antennas in transmission" "1" "2" "4")
add_list2_option(RF_BOARD "EXMIMO" "RF head type" "None" "OAI_USRP" "OAI_BLADERF" "OAI_LMSSDR" "OAI_SIMU")
......@@ -926,6 +926,9 @@ set_target_properties(tcp_bridge_oai PROPERTIES COMPILE_FLAGS "-fvisibility=hidd
# Benetel 4G library
######################################################################
include_directories ("/usr/include/dpdk")
set(HWLIB_BENETEL_4G_SOURCE
${OPENAIR_TARGETS}/ARCH/ETHERNET/benetel/4g/benetel.c
${OPENAIR_TARGETS}/ARCH/ETHERNET/benetel/4g/shared_buffers.c
......
cmake_targets/autotests/test_case_list.xml
View file @ 76273a2a
......@@ -1294,7 +1294,8 @@
(Test10: SC-FDMA, 75 PRBs),
(Test11: SC-FDMA, 216 PRBs),
(Test12: SC-FDMA, 273 PRBs),
(Test13: SC-FDMA, 3 DMRS)</desc>
(Test13: SC-FDMA, 3 DMRS),
(Test14: MCS 16 50 PRBs 2 RX_Antenna)</desc>
<pre_compile_prog></pre_compile_prog>
<compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
<compile_prog_args> --phy_simulators -c </compile_prog_args>
......@@ -1313,9 +1314,10 @@
-n100 -s2 -Z -r75
-n100 -s2 -Z -r216 -R217
-n100 -s2 -Z -r270 -R273
-n100 -s2 -Z -U 2 0 2</main_exec_args>
-n100 -s2 -Z -U 2 0 2
-n100 -m16 -s10 -z2</main_exec_args>
<tags>nr_ulsim.test1 nr_ulsim.test2 nr_ulsim.test3 nr_ulsim.test4 nr_ulsim.test5 nr_ulsim.test6 nr_ulsim.test7 nr_ulsim.test8 nr_ulsim.test9 nr_ulsim.test10 nr_ulsim.test11 nr_ulsim.test12 nr_ulsim.test13</tags>
<tags>nr_ulsim.test1 nr_ulsim.test2 nr_ulsim.test3 nr_ulsim.test4 nr_ulsim.test5 nr_ulsim.test6 nr_ulsim.test7 nr_ulsim.test8 nr_ulsim.test9 nr_ulsim.test10 nr_ulsim.test11 nr_ulsim.test12 nr_ulsim.test13 nr_ulsim.test14</tags>
<search_expr_true>PUSCH test OK</search_expr_true>
<search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
<nruns>3</nruns>
......
cmake_targets/build_oai
View file @ 76273a2a
......@@ -48,8 +48,9 @@ DEADLINE_SCHEDULER_FLAG_USER=""
CPU_AFFINITY_FLAG_USER="False" #Only valid when low-latency flag is set to False
REL="Rel15"
HW="None"
TP="None"
TP="Ethernet"
EPC=0
VERBOSE_CI=0
VERBOSE_COMPILE=0
CFLAGS_PROCESSOR_USER=""
RUN_GROUP=0
......@@ -289,6 +290,9 @@ function main() {
esac
echo_info "Setting hardware to: $HW"
shift 2;;
-t | --transport)
TP=$2
shift 2;;
-P | --phy_simulators)
SIMUS_PHY=1
echo_info "Will compile dlsim, ulsim, ..."
......@@ -324,6 +328,10 @@ function main() {
HWLAT_TEST=1
echo_info "Will compile hw latency test program"
shift;;
--verbose-ci)
VERBOSE_CI=1
echo_info "Will compile with verbose instructions in CI Docker env"
shift;;
--verbose-compile)
VERBOSE_COMPILE=1
echo_info "Will compile with verbose instructions"
......@@ -936,12 +944,30 @@ function main() {
echo_info "Building transport protocol libraries"
rm -f liboai_transpro.so
rm -f $dbin/liboai_transpro.so
compilations \
$build_dir oai_eth_transpro \
liboai_eth_transpro.so $dbin/liboai_eth_transpro.so.$REL
ln -sf liboai_eth_transpro.so liboai_transpro.so
ln -sf $dbin/liboai_eth_transpro.so.$REL $dbin/liboai_transpro.so
echo_info "liboai_transpro.so is linked to ETHERNET transport"
if [ "$TP" == "Ethernet" ]; then
compilations \
$build_dir oai_eth_transpro \
liboai_eth_transpro.so $dbin/liboai_eth_transpro.so.$REL
ln -sf liboai_eth_transpro.so liboai_transpro.so
ln -sf $dbin/liboai_eth_transpro.so.$REL $dbin/liboai_transpro.so
echo_info "liboai_transpro.so is linked to ETHERNET transport"
fi
if [ "$TP" == "benetel4g" ]; then
compilations \
$build_dir benetel_4g \
libbenetel_4g.so $dbin/libbenetel_4g.$REL
ln -sf libbenetel_4g.so liboai_transpro.so
ln -sf $dbin/libbenetel_4g.so.$REL $dbin/liboai_transpro.so
echo_info "liboai_transpro.so is linked to BENETEL4G transport"
fi
if [ "$TP" == "benetel5g" ]; then
compilations \
$build_dir benetel_5g \
libbenetel_5g.so $dbin/libbenetel_5g.$REL
ln -sf libbenetel_5g.so liboai_transpro.so
ln -sf $dbin/libbenetel_5g.so.$REL $dbin/liboai_transpro.so
echo_info "liboai_transpro.so is linked to BENETEL4G transport"
fi
fi
fi
......
cmake_targets/tools/build_helper
View file @ 76273a2a
......@@ -41,7 +41,7 @@ KERNEL_VERSION=$(uname -r | cut -d '.' -f1)
KERNEL_MAJOR=$(uname -r | cut -d '.' -f2)
#check if we run inside a container
IS_CONTAINER=`egrep -c "docker|podman|kubepods" /proc/self/cgroup || true`
IS_CONTAINER=`egrep -c "docker|podman|kubepods|libpod|buildah" /proc/self/cgroup || true`
#sudo is not needed when we are root
if [ "$UID" = 0 ]
then
......@@ -221,6 +221,11 @@ compilations() {
ret=$?
} > $dlog/$2.$REL.txt 2>&1
set -e
if [ "$VERBOSE_CI" == "1" ]; then
echo_info "====== Start of log for $2.$REL.txt ======"
cat $dlog/$2.$REL.txt
echo_info "====== End of log for $2.$REL.txt ======"
fi
if [[ $ret -ne 0 ]]; then
check_warnings "$dlog/$2.$REL.txt"
check_errors "$dlog/$2.$REL.txt"
......@@ -359,10 +364,10 @@ check_install_usrp_uhd_driver(){
elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
if [ $IS_CONTAINER -eq 0 ]
then
$SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils cmake
$SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils $CMAKE
$SUDO -H pip install requests
else
$SUDO $INSTALLER -y install boost boost-devel cmake3
$SUDO $INSTALLER -y install boost boost-devel $CMAKE
$SUDO pip3 install mako requests
fi
if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
......@@ -488,7 +493,7 @@ install_soapy_from_source(){
#git checkout tags/release_003_010_001_001
mkdir -p build
cd build
cmake ../
$CMAKE ../
echo "Compiling SoapyRemote"
make -j`nproc`
$SUDO make install
......@@ -507,7 +512,7 @@ install_soapy_iris_from_source(){
cd sklk-soapyiris
mkdir -p build
cd build
cmake ../
$CMAKE ../
echo "Compiling SoapyIris"
make -j`nproc`
$SUDO make install
......@@ -684,7 +689,7 @@ check_install_oai_software() {
automake \
bison \
build-essential \
cmake \
$CMAKE \
cmake-curses-gui \
ninja-build \
doxygen \
......
common/utils/LOG/vcd_signal_dumper.c
View file @ 76273a2a
......@@ -302,6 +302,9 @@ const char* eurecomFunctionsNames[] = {
/* PHY signals */
"ue_synch",
"ue_slot_fep",
"ue_slot_fep_pdcch",
"ue_slot_fep_pbch",
"ue_slot_fep_pdsch",
"ue_slot_fep_mbsfn",
"ue_slot_fep_mbsfn_khz_1dot25",
"ue_rrc_measurements",
......@@ -390,6 +393,8 @@ const char* eurecomFunctionsNames[] = {
"rx_pmch",
"rx_pmch_khz_1dot25",
"pdsch_procedures",
"pdsch_procedures_crnti",
//"dlsch_procedures_crnti",
"pdsch_procedures_si",
"pdsch_procedures_p",
"pdsch_procedures_ra",
......
common/utils/LOG/vcd_signal_dumper.h
View file @ 76273a2a
......@@ -283,6 +283,9 @@ typedef enum {
/* PHY signals */
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_SYNCH,
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_SLOT_FEP,
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_SLOT_FEP_PDCCH,
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_SLOT_FEP_PBCH,
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_SLOT_FEP_PDSCH,
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_SLOT_FEP_MBSFN,
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_SLOT_FEP_MBSFN_KHZ_1DOT25,
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_RRC_MEASUREMENTS,
......@@ -371,9 +374,11 @@ typedef enum {
VCD_SIGNAL_DUMPER_FUNCTIONS_RX_PMCH,
VCD_SIGNAL_DUMPER_FUNCTIONS_RX_PMCH_KHZ_1DOT25,
VCD_SIGNAL_DUMPER_FUNCTIONS_PDSCH_PROC,
VCD_SIGNAL_DUMPER_FUNCTIONS_PDSCH_PROC_C,
VCD_SIGNAL_DUMPER_FUNCTIONS_PDSCH_PROC_SI,
VCD_SIGNAL_DUMPER_FUNCTIONS_PDSCH_PROC_P,
VCD_SIGNAL_DUMPER_FUNCTIONS_PDSCH_PROC_RA,
//VCD_SIGNAL_DUMPER_FUNCTIONS_DLSCH_PROC_C,
VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_UE_CONFIG_SIB2,
VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_CONFIG_SIB1_ENB,
VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_CONFIG_SIB2_ENB,
......
common/utils/T/T_defs.h
View file @ 76273a2a
......@@ -73,7 +73,7 @@ typedef struct {
} T_cache_t;
/* number of VCD functions (to be kept up to date! see in T_messages.txt) */
#define VCD_NUM_FUNCTIONS (269)
#define VCD_NUM_FUNCTIONS (273)
/* number of VCD variables (to be kept up to date! see in T_messages.txt) */
#define VCD_NUM_VARIABLES (187)
......
common/utils/T/T_messages.txt
View file @ 76273a2a
......@@ -2407,6 +2407,21 @@ ID = VCD_FUNCTION_UE_SLOT_FEP
GROUP = ALL:VCD:UE:VCD_FUNCTION
FORMAT = int,value
VCD_NAME = ue_slot_fep
ID = VCD_FUNCTION_UE_SLOT_FEP_PDCCH
DESC = VCD function UE_SLOT_FEP_PDCCH
GROUP = ALL:VCD:UE:VCD_FUNCTION
FORMAT = int,value
VCD_NAME = ue_slot_fep_pdcch
ID = VCD_FUNCTION_UE_SLOT_FEP_PBCH
DESC = VCD function UE_SLOT_FEP_PBCH
GROUP = ALL:VCD:UE:VCD_FUNCTION
FORMAT = int,value
VCD_NAME = ue_slot_fep_pbch
ID = VCD_FUNCTION_UE_SLOT_FEP_PDSCH
DESC = VCD function UE_SLOT_FEP_PDSCH
GROUP = ALL:VCD:UE:VCD_FUNCTION
FORMAT = int,value
VCD_NAME = ue_slot_fep_pdsch
ID = VCD_FUNCTION_UE_SLOT_FEP_MBSFN
DESC = VCD function UE_SLOT_FEP_MBSFN
GROUP = ALL:VCD:UE:VCD_FUNCTION
......@@ -2847,6 +2862,11 @@ ID = VCD_FUNCTION_PDSCH_PROC
GROUP = ALL:VCD:UE:VCD_FUNCTION
FORMAT = int,value
VCD_NAME = pdsch_procedures
ID = VCD_FUNCTION_PDSCH_PROC_C
DESC = VCD function PDSCH_PROC_C
GROUP = ALL:VCD:UE:VCD_FUNCTION
FORMAT = int,value
VCD_NAME = pdsch_procedures_crnti
ID = VCD_FUNCTION_PDSCH_PROC_SI
DESC = VCD function PDSCH_PROC_SI
GROUP = ALL:VCD:UE:VCD_FUNCTION
......
common/utils/ocp_itti/intertask_interface.cpp
View file @ 76273a2a
......@@ -339,7 +339,9 @@ extern "C" {
int itti_create_queue(const task_info_t *taskInfo) {
pthread_mutex_lock (&lock_nb_queues);
int newQueue=nb_queues++;
AssertFatal(tasks=(task_list_t **) realloc(tasks, nb_queues * sizeof(*tasks)),"");
task_list_t **new_tasks = (task_list_t **)realloc(tasks, nb_queues * sizeof(*tasks));
AssertFatal(new_tasks != NULL, "could not realloc() tasks list");
tasks = new_tasks;
tasks[newQueue]= new task_list_t;
pthread_mutex_unlock (&lock_nb_queues);
LOG_I(TMR,"Starting itti queue: %s as task %d\n", taskInfo->name, newQueue);
......
docker/Dockerfile.eNB.rhel8.2
View file @ 76273a2a
......@@ -27,14 +27,15 @@
FROM localhost/ran-build:latest AS enb-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
rm -Rf log && \
mkdir -p log && \
./build_oai --eNB --ninja -w USRP
./build_oai --eNB --ninja -w USRP --verbose-ci
# debug
#RUN ldconfig -v && ldd /oai-ran/targets/bin/lte-softmodem.Rel15
......
docker/Dockerfile.eNB.ubuntu18
View file @ 76273a2a
......@@ -27,14 +27,15 @@
FROM ran-build:latest AS enb-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
rm -Rf log && \
mkdir -p log && \
./build_oai --eNB --ninja -w USRP
./build_oai --eNB --ninja -w USRP --verbose-ci
RUN apt-get install -y python3-pip && \
pip3 install --ignore-installed pyyaml && \
......
docker/Dockerfile.gNB.rhel8.2
View file @ 76273a2a
......@@ -27,14 +27,15 @@
FROM localhost/ran-build:latest AS gnb-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
rm -Rf log && \
mkdir -p log && \
./build_oai --gNB --ninja -w USRP
./build_oai --gNB --ninja -w USRP --verbose-ci
#debug
#RUN ldconfig -v
......
docker/Dockerfile.gNB.ubuntu18
View file @ 76273a2a
......@@ -27,14 +27,15 @@
FROM ran-build:latest AS gnb-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
rm -Rf log && \
mkdir -p log && \
./build_oai --gNB --ninja -w USRP
./build_oai --gNB --ninja -w USRP --verbose-ci
#debug
RUN ldconfig -v
......
docker/Dockerfile.lteUE.rhel8.2
View file @ 76273a2a
......@@ -27,15 +27,15 @@
FROM localhost/ran-build:latest AS lte-ue-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
rm -Rf log && \
mkdir -p log && \
./build_oai --UE --ninja -w USRP
./build_oai --UE --ninja -w USRP --verbose-ci
# debug
#RUN ldconfig -v && ldd /oai-ran/targets/bin/lte-uesoftmodem.Rel15
......
docker/Dockerfile.lteUE.ubuntu18
View file @ 76273a2a
......@@ -27,14 +27,15 @@
FROM ran-build:latest AS lte-ue-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
rm -Rf log && \
mkdir -p log && \
./build_oai --UE --ninja -w USRP
./build_oai --UE --ninja -w USRP --verbose-ci
# debug
#RUN ldconfig -v
......
docker/Dockerfile.nrUE.rhel8.2
View file @ 76273a2a
......@@ -27,14 +27,15 @@
FROM localhost/ran-build:latest AS nr-ue-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
rm -Rf log && \
mkdir -p log && \
./build_oai --nrUE --ninja -w USRP
./build_oai --nrUE --ninja -w USRP --verbose-ci
# debug
#RUN ldconfig -v
......
docker/Dockerfile.nrUE.ubuntu18
View file @ 76273a2a
......@@ -27,14 +27,15 @@
FROM ran-build:latest AS nr-ue-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
rm -Rf log && \
mkdir -p log && \
./build_oai --nrUE --ninja -w USRP
./build_oai --nrUE --ninja -w USRP --verbose-ci
# debug
#RUN ldconfig -v
......
executables/nr-gnb.c
View file @ 76273a2a
......@@ -250,13 +250,14 @@ void rx_func(void *param) {
L1_nr_prach_procedures(gNB,frame_rx,slot_rx);
//apply the rx signal rotation here
apply_nr_rotation_ul(&gNB->frame_parms,
gNB->common_vars.rxdataF[0],
slot_rx,
0,
gNB->frame_parms.Ncp==EXTENDED?12:14,
gNB->frame_parms.ofdm_symbol_size);
for (int aa = 0; aa < gNB->frame_parms.nb_antennas_rx; aa++) {
apply_nr_rotation_ul(&gNB->frame_parms,
gNB->common_vars.rxdataF[aa],
slot_rx,
0,
gNB->frame_parms.Ncp==EXTENDED?12:14,
gNB->frame_parms.ofdm_symbol_size);
}
phy_procedures_gNB_uespec_RX(gNB, frame_rx, slot_rx);
}
......
executables/nr-ru.c
View file @ 76273a2a
......@@ -797,46 +797,94 @@ void fill_rf_config(RU_t *ru, char *rf_config_file) {
int mu = config->ssb_config.scs_common.value;
int N_RB = config->carrier_config.dl_grid_size[config->ssb_config.scs_common.value].value;
if (mu == NR_MU_0) { //or if LTE
if(N_RB == 100) {
if (mu == NR_MU_0) {
switch(N_RB) {
case 270:
if (fp->threequarter_fs) {
cfg->sample_rate=92.16e6;
cfg->samples_per_frame = 921600;
cfg->tx_bw = 50e6;
cfg->rx_bw = 50e6;
} else {
cfg->sample_rate=61.44e6;
cfg->samples_per_frame = 614400;
cfg->tx_bw = 50e6;
cfg->rx_bw = 50e6;
}
case 216:
if (fp->threequarter_fs) {
cfg->sample_rate=46.08e6;
cfg->samples_per_frame = 460800;
cfg->tx_bw = 40e6;
cfg->rx_bw = 40e6;
}
else {
cfg->sample_rate=61.44e6;
cfg->samples_per_frame = 614400;
cfg->tx_bw = 40e6;
cfg->rx_bw = 40e6;
}
break;
case 106:
if (fp->threequarter_fs) {
cfg->sample_rate=23.04e6;
cfg->samples_per_frame = 230400;
cfg->tx_bw = 10e6;
cfg->rx_bw = 10e6;
} else {
cfg->tx_bw = 20e6;
cfg->rx_bw = 20e6;
}
else {
cfg->sample_rate=30.72e6;
cfg->samples_per_frame = 307200;
cfg->tx_bw = 20e6;
cfg->rx_bw = 20e6;
}
break;
case 52:
if (fp->threequarter_fs) {
cfg->sample_rate=11.52e6;
cfg->samples_per_frame = 115200;
cfg->tx_bw = 10e6;
cfg->rx_bw = 10e6;
}
else {
cfg->sample_rate=15.36e6;
cfg->samples_per_frame = 153600;
cfg->tx_bw = 10e6;
cfg->rx_bw = 10e6;
}
} else if(N_RB == 50) {
cfg->sample_rate=15.36e6;
cfg->samples_per_frame = 153600;
cfg->tx_bw = 5e6;
cfg->rx_bw = 5e6;
} else if (N_RB == 25) {
cfg->sample_rate=7.68e6;
cfg->samples_per_frame = 76800;
cfg->tx_bw = 2.5e6;
cfg->rx_bw = 2.5e6;
} else if (N_RB == 6) {
cfg->sample_rate=1.92e6;
cfg->samples_per_frame = 19200;
cfg->tx_bw = 1.5e6;
cfg->rx_bw = 1.5e6;
} else AssertFatal(1==0,"Unknown N_RB %d\n",N_RB);
case 25:
if (fp->threequarter_fs) {
cfg->sample_rate=5.76e6;
cfg->samples_per_frame = 57600;
cfg->tx_bw = 5e6;
cfg->rx_bw = 5e6;
}
else {
cfg->sample_rate=7.68e6;
cfg->samples_per_frame = 76800;
cfg->tx_bw = 5e6;
cfg->rx_bw = 5e6;
}
break;
default:
AssertFatal(0==1,"N_RB %d not yet supported for numerology %d\n",N_RB,mu);
}
} else if (mu == NR_MU_1) {
if(N_RB == 273) {
switch(N_RB) {
case 273:
if (fp->threequarter_fs) {
AssertFatal(0 == 1,"three quarter sampling not supported for N_RB 273\n");
cfg->sample_rate=184.32e6;
cfg->samples_per_frame = 1843200;
cfg->tx_bw = 100e6;
cfg->rx_bw = 100e6;
} else {
cfg->sample_rate=122.88e6;
cfg->samples_per_frame = 1228800;
cfg->tx_bw = 100e6;
cfg->rx_bw = 100e6;
}
} else if(N_RB == 217) {
break;
case 217:
if (fp->threequarter_fs) {
cfg->sample_rate=92.16e6;
cfg->samples_per_frame = 921600;
......@@ -848,7 +896,8 @@ void fill_rf_config(RU_t *ru, char *rf_config_file) {
cfg->tx_bw = 80e6;
cfg->rx_bw = 80e6;
}
} else if(N_RB == 106) {
break;
case 106:
if (fp->threequarter_fs) {
cfg->sample_rate=46.08e6;
cfg->samples_per_frame = 460800;
......@@ -861,20 +910,68 @@ void fill_rf_config(RU_t *ru, char *rf_config_file) {
cfg->tx_bw = 40e6;
cfg->rx_bw = 40e6;
}
} else {
break;
case 51:
if (fp->threequarter_fs) {
cfg->sample_rate=23.04e6;
cfg->samples_per_frame = 230400;
cfg->tx_bw = 20e6;
cfg->rx_bw = 20e6;
}
else {
cfg->sample_rate=30.72e6;
cfg->samples_per_frame = 307200;
cfg->tx_bw = 20e6;
cfg->rx_bw = 20e6;
}
break;
case 24:
if (fp->threequarter_fs) {
cfg->sample_rate=11.52e6;
cfg->samples_per_frame = 115200;
cfg->tx_bw = 10e6;
cfg->rx_bw = 10e6;
}
else {
cfg->sample_rate=15.36e6;
cfg->samples_per_frame = 153600;
cfg->tx_bw = 10e6;
cfg->rx_bw = 10e6;
}
break;
default:
AssertFatal(0==1,"N_RB %d not yet supported for numerology %d\n",N_RB,mu);
}
} else if (mu == NR_MU_3) {
if (N_RB == 66) {
cfg->sample_rate = 122.88e6;
cfg->samples_per_frame = 1228800;
cfg->tx_bw = 100e6;
cfg->rx_bw = 100e6;
} else if(N_RB == 32) {
cfg->sample_rate=61.44e6;
cfg->samples_per_frame = 614400;
cfg->tx_bw = 50e6;
cfg->rx_bw = 50e6;
switch(N_RB) {
case 66:
if (fp->threequarter_fs) {
cfg->sample_rate=184.32e6;
cfg->samples_per_frame = 1843200;
cfg->tx_bw = 100e6;
cfg->rx_bw = 100e6;
} else {
cfg->sample_rate = 122.88e6;
cfg->samples_per_frame = 1228800;
cfg->tx_bw = 100e6;
cfg->rx_bw = 100e6;
}
break;
case 32:
if (fp->threequarter_fs) {
cfg->sample_rate=92.16e6;
cfg->samples_per_frame = 921600;
cfg->tx_bw = 50e6;
cfg->rx_bw = 50e6;
} else {
cfg->sample_rate=61.44e6;
cfg->samples_per_frame = 614400;
cfg->tx_bw = 50e6;
cfg->rx_bw = 50e6;
}
break;
default:
AssertFatal(0==1,"N_RB %d not yet supported for numerology %d\n",N_RB,mu);
}
} else {
AssertFatal(0 == 1,"Numerology %d not supported for the moment\n",mu);
......@@ -921,60 +1018,52 @@ int setup_RU_buffers(RU_t *ru) {
int i,j;
int card,ant;
//uint16_t N_TA_offset = 0;
NR_DL_FRAME_PARMS *frame_parms;
NR_DL_FRAME_PARMS *fp;
nfapi_nr_config_request_scf_t *config = &ru->config;
if (ru) {
frame_parms = ru->nr_frame_parms;
printf("setup_RU_buffers: frame_parms = %p\n",frame_parms);
fp = ru->nr_frame_parms;
printf("setup_RU_buffers: frame_parms = %p\n",fp);
} else {
printf("ru pointer is NULL\n");
return(-1);
}
int mu = config->ssb_config.scs_common.value;
int N_RB = config->carrier_config.dl_grid_size[config->ssb_config.scs_common.value].value;
if (config->cell_config.frame_duplex_type.value == TDD) {
int N_TA_offset = config->carrier_config.uplink_frequency.value < 6000000 ? 400 : 431; // reference samples for 25600Tc @ 30.72 Ms/s for FR1, same @ 61.44 Ms/s for FR2
double factor=1;
switch (mu) {
case 0: //15 kHz scs
AssertFatal(N_TA_offset == 400,"scs_common 15kHz only for FR1\n");
if (N_RB <= 25) factor = .25; // 7.68 Ms/s
else if (N_RB <=50) factor = .5; // 15.36 Ms/s
else if (N_RB <=75) factor = 1.0; // 30.72 Ms/s
else if (N_RB <=100) factor = 1.0; // 30.72 Ms/s
else AssertFatal(1==0,"Too many PRBS for mu=0\n");
break;
case 1: //30 kHz sc
AssertFatal(N_TA_offset == 400,"scs_common 30kHz only for FR1\n");
if (N_RB <= 106) factor = 2.0; // 61.44 Ms/s
else if (N_RB <= 275) factor = 4.0; // 122.88 Ms/s
break;
case 2: //60 kHz scs
AssertFatal(1==0,"scs_common should not be 60 kHz\n");
break;
case 3: //120 kHz scs
AssertFatal(N_TA_offset == 431,"scs_common 120kHz only for FR2\n");
break;
case 4: //240 kHz scs
AssertFatal(1==0,"scs_common should not be 60 kHz\n");
if (N_RB <= 32) factor = 1.0; // 61.44 Ms/s
else if (N_RB <= 66) factor = 2.0; // 122.88 Ms/s
else AssertFatal(1==0,"N_RB %d is too big for curretn FR2 implementation\n",N_RB);
break;
if (N_RB == 100) ru->N_TA_offset = 624;
else if (N_RB == 50) ru->N_TA_offset = 624/2;
else if (N_RB == 25) ru->N_TA_offset = 624/4;
case 0: //15 kHz scs
AssertFatal(N_TA_offset == 400, "scs_common 15kHz only for FR1\n");
factor = fp->samples_per_subframe / 30720.0;
break;
case 1: //30 kHz sc
AssertFatal(N_TA_offset == 400, "scs_common 30kHz only for FR1\n");
factor = fp->samples_per_subframe / 30720.0;
break;
case 2: //60 kHz scs
AssertFatal(1==0, "scs_common should not be 60 kHz\n");
break;
case 3: //120 kHz scs
AssertFatal(N_TA_offset == 431, "scs_common 120kHz only for FR2\n");
factor = fp->samples_per_subframe / 61440.0;
break;
case 4: //240 kHz scs
AssertFatal(N_TA_offset == 431, "scs_common 240kHz only for FR2\n");
factor = fp->samples_per_subframe / 61440.0;
break;
default:
AssertFatal(1==0, "Invalid scs_common!\n");
}
if (frame_parms->threequarter_fs == 1) factor = factor*.75;
ru->N_TA_offset = (int)(N_TA_offset * factor);
LOG_I(PHY,"RU %d Setting N_TA_offset to %d samples (factor %f, UL Freq %d, N_RB %d)\n",ru->idx,ru->N_TA_offset,factor,
config->carrier_config.uplink_frequency.value, N_RB);
LOG_I(PHY,"RU %d Setting N_TA_offset to %d samples (factor %f, UL Freq %d, N_RB %d, mu %d)\n",ru->idx,ru->N_TA_offset,factor,
config->carrier_config.uplink_frequency.value, N_RB, mu);
}
else ru->N_TA_offset = 0;
......
executables/nr-softmodem.c
View file @ 76273a2a
......@@ -136,9 +136,6 @@ double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0},{20,0,0,0}};
double rx_gain_off = 0.0;
double sample_rate=30.72e6;
double bw = 10.0e6;
static int tx_max_power[MAX_NUM_CCs]; /* = {0,0}*/;
......@@ -476,93 +473,6 @@ void set_default_frame_parms(nfapi_nr_config_request_scf_t *config[MAX_NUM_CCs],
}
}
/*
void init_openair0(void) {
int card;
int i;
for (card=0; card<MAX_CARDS; card++) {
openair0_cfg[card].mmapped_dma=mmapped_dma;
openair0_cfg[card].configFilename = NULL;
if(config[0]->rf_config.dl_carrier_bandwidth.value == 100) {
if (frame_parms[0]->threequarter_fs) {
openair0_cfg[card].sample_rate=23.04e6;
openair0_cfg[card].samples_per_frame = 230400;
openair0_cfg[card].tx_bw = 10e6;
openair0_cfg[card].rx_bw = 10e6;
} else {
openair0_cfg[card].sample_rate=30.72e6;
openair0_cfg[card].samples_per_frame = 307200;
openair0_cfg[card].tx_bw = 10e6;
openair0_cfg[card].rx_bw = 10e6;
}
} else if(config[0]->rf_config.dl_carrier_bandwidth.value == 50) {
openair0_cfg[card].sample_rate=15.36e6;
openair0_cfg[card].samples_per_frame = 153600;
openair0_cfg[card].tx_bw = 5e6;
openair0_cfg[card].rx_bw = 5e6;
} else if (config[0]->rf_config.dl_carrier_bandwidth.value == 25) {
openair0_cfg[card].sample_rate=7.68e6;
openair0_cfg[card].samples_per_frame = 76800;
openair0_cfg[card].tx_bw = 2.5e6;
openair0_cfg[card].rx_bw = 2.5e6;
} else if (config[0]->rf_config.dl_carrier_bandwidth.value == 6) {
openair0_cfg[card].sample_rate=1.92e6;
openair0_cfg[card].samples_per_frame = 19200;
openair0_cfg[card].tx_bw = 1.5e6;
openair0_cfg[card].rx_bw = 1.5e6;
}
if (config[0]->subframe_config.duplex_mode.value==TDD)
openair0_cfg[card].duplex_mode = duplex_mode_TDD;
else //FDD
openair0_cfg[card].duplex_mode = duplex_mode_FDD;
printf("HW: Configuring card %d, nb_antennas_tx/rx %d/%d\n",card,
RC.gNB[0]->gNB_config.rf_config.tx_antenna_ports.value,
RC.gNB[0]->gNB_config.rf_config.tx_antenna_ports.value );
openair0_cfg[card].Mod_id = 0;
openair0_cfg[card].num_rb_dl=config[0]->rf_config.dl_carrier_bandwidth.value;
openair0_cfg[card].clock_source = clock_source;
openair0_cfg[card].tx_num_channels=min(2,RC.gNB[0]->gNB_config.rf_config.tx_antenna_ports.value );
openair0_cfg[card].rx_num_channels=min(2,RC.gNB[0]->gNB_config.rf_config.tx_antenna_ports.value );
for (i=0; i<4; i++) {
if (i<openair0_cfg[card].tx_num_channels)
openair0_cfg[card].tx_freq[i] = downlink_frequency[0][i] ;
else
openair0_cfg[card].tx_freq[i]=0.0;
if (i<openair0_cfg[card].rx_num_channels)
openair0_cfg[card].rx_freq[i] =downlink_frequency[0][i] + uplink_frequency_offset[0][i] ;
else
openair0_cfg[card].rx_freq[i]=0.0;
openair0_cfg[card].autocal[i] = 1;
openair0_cfg[card].tx_gain[i] = tx_gain[0][i];
openair0_cfg[card].rx_gain[i] = RC.gNB[0]->rx_total_gain_dB;
openair0_cfg[card].configFilename = get_softmodem_params()->rf_config_file;
printf("Card %d, channel %d, Setting tx_gain %f, rx_gain %f, tx_freq %f, rx_freq %f\n",
card,i, openair0_cfg[card].tx_gain[i],
openair0_cfg[card].rx_gain[i],
openair0_cfg[card].tx_freq[i],
openair0_cfg[card].rx_freq[i]);
}
} // for loop on cards
}
*/
void wait_RUs(void) {
LOG_I(PHY,"Waiting for RUs to be configured ... RC.ru_mask:%02lx\n", RC.ru_mask);
// wait for all RUs to be configured over fronthaul
......
executables/nr-ue.c
View file @ 76273a2a
......@@ -238,43 +238,6 @@ static void UE_synch(void *arg) {
openair0_cfg[UE->rf_map.card].rx_freq[0],
openair0_cfg[UE->rf_map.card].tx_freq[0]);
// reconfigure for potentially different bandwidth
switch(UE->frame_parms.N_RB_DL) {
case 6:
openair0_cfg[UE->rf_map.card].sample_rate =1.92e6;
openair0_cfg[UE->rf_map.card].rx_bw =.96e6;
openair0_cfg[UE->rf_map.card].tx_bw =.96e6;
// openair0_cfg[0].rx_gain[0] -= 12;
break;
case 25:
openair0_cfg[UE->rf_map.card].sample_rate =7.68e6;
openair0_cfg[UE->rf_map.card].rx_bw =2.5e6;
openair0_cfg[UE->rf_map.card].tx_bw =2.5e6;
// openair0_cfg[0].rx_gain[0] -= 6;
break;
case 50:
openair0_cfg[UE->rf_map.card].sample_rate =15.36e6;
openair0_cfg[UE->rf_map.card].rx_bw =5.0e6;
openair0_cfg[UE->rf_map.card].tx_bw =5.0e6;
// openair0_cfg[0].rx_gain[0] -= 3;
break;
case 100:
openair0_cfg[UE->rf_map.card].sample_rate=30.72e6;
openair0_cfg[UE->rf_map.card].rx_bw=10.0e6;
openair0_cfg[UE->rf_map.card].tx_bw=10.0e6;
// openair0_cfg[0].rx_gain[0] -= 0;
break;
case 66:
openair0_cfg[UE->rf_map.card].sample_rate=122.88e6;
openair0_cfg[UE->rf_map.card].rx_bw=100.e6;
openair0_cfg[UE->rf_map.card].tx_bw=100.e6;
break;
}
if (UE->mode != loop_through_memory) {
UE->rfdevice.trx_set_freq_func(&UE->rfdevice,&openair0_cfg[0],0);
//UE->rfdevice.trx_set_gains_func(&openair0,&openair0_cfg[0]);
......@@ -765,13 +728,13 @@ void *UE_thread(void *arg) {
if (flags || IS_SOFTMODEM_RFSIM)
AssertFatal( writeBlockSize ==
UE->rfdevice.trx_write_func(&UE->rfdevice,
writeTimestamp,
txp,
writeBlockSize,
UE->frame_parms.nb_antennas_tx,
flags),"");
UE->rfdevice.trx_write_func(&UE->rfdevice,
writeTimestamp,
txp,
writeBlockSize,
UE->frame_parms.nb_antennas_tx,
flags),"");
for (int i=0; i<UE->frame_parms.nb_antennas_tx; i++)
memset(txp[i], 0, writeBlockSize);
......
executables/nr-uesoftmodem.c
View file @ 76273a2a
......@@ -145,7 +145,6 @@ int chain_offset = 0;
int card_offset = 0;
uint64_t num_missed_slots = 0; // counter for the number of missed slots
int transmission_mode = 1;
int numerology = 0;
int usrp_tx_thread = 0;
int oaisim_flag = 0;
int emulate_rf = 0;
......@@ -322,92 +321,10 @@ void init_openair0(void) {
for (card=0; card<MAX_CARDS; card++) {
uint64_t dl_carrier, ul_carrier;
openair0_cfg[card].configFilename = NULL;
openair0_cfg[card].threequarter_fs = frame_parms->threequarter_fs;
numerology = frame_parms->numerology_index;
if(frame_parms->N_RB_DL == 66) {
if (numerology==3) {
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 1228800;
} else {
LOG_E(PHY,"Unsupported numerology! FR2 supports only 120KHz SCS for now.\n");
exit(-1);
}
}else if(frame_parms->N_RB_DL == 32) {
if (numerology==3) {
openair0_cfg[card].sample_rate=61.44e6;
openair0_cfg[card].samples_per_frame = 614400;
} else {
LOG_E(PHY,"Unsupported numerology! FR2 supports only 120KHz SCS for now.\n");
exit(-1);
}
}else if(frame_parms->N_RB_DL == 217) {
if (numerology==1) {
if (frame_parms->threequarter_fs) {
openair0_cfg[card].sample_rate=92.16e6;
openair0_cfg[card].samples_per_frame = 921600;
}
else {
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 1228800;
}
} else {
LOG_E(PHY,"Unsupported numerology!\n");
exit(-1);
}
} else if(frame_parms->N_RB_DL == 273) {
if (numerology==1) {
if (frame_parms->threequarter_fs) {
AssertFatal(0 == 1,"three quarter sampling not supported for N_RB 273\n");
}
else {
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 1228800;
}
} else {
LOG_E(PHY,"Unsupported numerology!\n");
exit(-1);
}
} else if(frame_parms->N_RB_DL == 106) {
if (numerology==0) {
if (frame_parms->threequarter_fs) {
openair0_cfg[card].sample_rate=23.04e6;
openair0_cfg[card].samples_per_frame = 230400;
} else {
openair0_cfg[card].sample_rate=30.72e6;
openair0_cfg[card].samples_per_frame = 307200;
}
} else if (numerology==1) {
if (frame_parms->threequarter_fs) {
openair0_cfg[card].sample_rate=46.08e6;
openair0_cfg[card].samples_per_frame = 460800;
}
else {
openair0_cfg[card].sample_rate=61.44e6;
openair0_cfg[card].samples_per_frame = 614400;
}
} else if (numerology==2) {
openair0_cfg[card].sample_rate=122.88e6;
openair0_cfg[card].samples_per_frame = 1228800;
} else {
LOG_E(PHY,"Unsupported numerology!\n");
exit(-1);
}
} else if(frame_parms->N_RB_DL == 50) {
openair0_cfg[card].sample_rate=15.36e6;
openair0_cfg[card].samples_per_frame = 153600;
} else if (frame_parms->N_RB_DL == 25) {
openair0_cfg[card].sample_rate=7.68e6;
openair0_cfg[card].samples_per_frame = 76800;
} else if (frame_parms->N_RB_DL == 6) {
openair0_cfg[card].sample_rate=1.92e6;
openair0_cfg[card].samples_per_frame = 19200;
}
else {
LOG_E(PHY,"Unknown NB_RB %d!\n",frame_parms->N_RB_DL);
exit(-1);
}
openair0_cfg[card].configFilename = NULL;
openair0_cfg[card].threequarter_fs = frame_parms->threequarter_fs;
openair0_cfg[card].sample_rate = frame_parms->samples_per_subframe * 1e3;
openair0_cfg[card].samples_per_frame = frame_parms->samples_per_frame;
if (frame_parms->frame_type==TDD)
openair0_cfg[card].duplex_mode = duplex_mode_TDD;
......@@ -421,8 +338,9 @@ void init_openair0(void) {
openair0_cfg[card].tx_num_channels = min(2, frame_parms->nb_antennas_tx);
openair0_cfg[card].rx_num_channels = min(2, frame_parms->nb_antennas_rx);
LOG_I(PHY, "HW: Configuring card %d, tx/rx num_channels %d/%d, duplex_mode %s\n",
LOG_I(PHY, "HW: Configuring card %d, sample_rate %f, tx/rx num_channels %d/%d, duplex_mode %s\n",
card,
openair0_cfg[card].sample_rate,
openair0_cfg[card].tx_num_channels,
openair0_cfg[card].rx_num_channels,
duplex_mode[openair0_cfg[card].duplex_mode]);
......
openair1/PHY/CODING/TESTBENCH/ldpctest.c
View file @ 76273a2a
......@@ -144,7 +144,7 @@ int test_ldpc(short No_iteration,
t_nrLDPC_procBuf nrLDPC_procBuf;
t_nrLDPC_procBuf* p_nrLDPC_procBuf = &nrLDPC_procBuf;
t_nrLDPC_time_stats decoder_profiler;
t_nrLDPC_time_stats decoder_profiler = {0};
t_nrLDPC_time_stats* p_decoder_profiler =&decoder_profiler ;
int32_t n_iter = 0;
......
openair1/PHY/INIT/nr_init.c
View file @ 76273a2a
......@@ -464,8 +464,8 @@ void nr_phy_config_request_sim(PHY_VARS_gNB *gNB,
gNB->mac_enabled = 1;
if (mu==1) {
fp->dl_CarrierFreq = 3500000000;//from_nrarfcn(gNB_config->nfapi_config.rf_bands.rf_band[0],gNB_config->nfapi_config.nrarfcn.value);
fp->ul_CarrierFreq = 3500000000;//fp->dl_CarrierFreq - (get_uldl_offset(gNB_config->nfapi_config.rf_bands.rf_band[0])*100000);
fp->dl_CarrierFreq = 3600000000;//from_nrarfcn(gNB_config->nfapi_config.rf_bands.rf_band[0],gNB_config->nfapi_config.nrarfcn.value);
fp->ul_CarrierFreq = 3600000000;//fp->dl_CarrierFreq - (get_uldl_offset(gNB_config->nfapi_config.rf_bands.rf_band[0])*100000);
fp->nr_band = 78;
// fp->threequarter_fs= 0;
} else if (mu==3) {
......
openair1/PHY/INIT/nr_init_ru.c
View file @ 76273a2a
......@@ -125,7 +125,7 @@ int nr_phy_init_RU(RU_t *ru) {
int beam_count = 0;
if (ru->nb_tx>1) {//Enable beamforming when nb_tx > 1
for (p=0;p<ru->nb_log_antennas;p++) {
if ((fp->L_ssb >> (63-p)) & 0x01)//64 bit-map with the MSB @2⁶³ corresponds to SSB ssb_index 0
//if ((fp->L_ssb >> (63-p)) & 0x01)//64 bit-map with the MSB @2⁶³ corresponds to SSB ssb_index 0
beam_count++;
}
AssertFatal(ru->nb_bfw==(beam_count*ru->nb_tx),"Number of beam weights from config file is %d while the expected number is %d",ru->nb_bfw,(beam_count*ru->nb_tx));
......@@ -133,7 +133,7 @@ int nr_phy_init_RU(RU_t *ru) {
int l_ind = 0;
for (i=0; i<RC.nb_nr_L1_inst; i++) {
for (p=0;p<ru->nb_log_antennas;p++) {
if ((fp->L_ssb >> (63-p)) & 0x01) {
//if ((fp->L_ssb >> (63-p)) & 0x01) {
ru->beam_weights[i][p] = (int32_t **)malloc16_clear(ru->nb_tx*sizeof(int32_t*));
for (j=0; j<ru->nb_tx; j++) {
ru->beam_weights[i][p][j] = (int32_t *)malloc16_clear(fp->ofdm_symbol_size*sizeof(int32_t));
......@@ -142,8 +142,8 @@ int nr_phy_init_RU(RU_t *ru) {
//printf("Beam Weight %08x for beam %d and tx %d\n",ru->bw_list[i][l_ind],p,j);
l_ind++;
} // for j
} // for p
}
//}
} // for p
} //for i
}
} // !=IF5
......
openair1/PHY/INIT/nr_init_ue.c
View file @ 76273a2a
This diff is collapsed.
openair1/PHY/INIT/nr_parms.c
View file @ 76273a2a
......@@ -75,9 +75,8 @@ int nr_get_ssb_start_symbol(NR_DL_FRAME_PARMS *fp)
return symbol;
}
void set_scs_parameters (NR_DL_FRAME_PARMS *fp, int mu, uint16_t bw)
void set_scs_parameters (NR_DL_FRAME_PARMS *fp, int mu, int N_RB_DL)
{
switch(mu) {
case NR_MU_0: //15kHz scs
......@@ -99,108 +98,17 @@ void set_scs_parameters (NR_DL_FRAME_PARMS *fp, int mu, uint16_t bw)
else
AssertFatal(1==0,"NR Operating Band n%d not available for SS block SCS with mu=%d\n", fp->nr_band, mu);
}
switch(bw){
case 5:
case 15:
case 20:
case 25:
case 30:
case 40: //40 MHz
if (fp->threequarter_fs) {
fp->ofdm_symbol_size = 1536;
fp->first_carrier_offset = 900; //1536 - ( (106*12) / 2 )
fp->nb_prefix_samples0 = 132;
fp->nb_prefix_samples = 108;
}
else {
fp->ofdm_symbol_size = 2048;
fp->first_carrier_offset = 1412; //2048 - ( (106*12) / 2 )
fp->nb_prefix_samples0 = 176;
fp->nb_prefix_samples = 144;
}
break;
case 50:
case 60:
case 70:
case 80: //80 MHz
if (fp->threequarter_fs) {
fp->ofdm_symbol_size = 3072;
fp->first_carrier_offset = 1770; //3072 - ( (217*12) / 2 )
fp->nb_prefix_samples0 = 264;
fp->nb_prefix_samples = 216;
}
else {
fp->ofdm_symbol_size = 4096;
fp->first_carrier_offset = 2794; //4096 - ( (217*12) / 2 )
fp->nb_prefix_samples0 = 352;
fp->nb_prefix_samples = 288;
}
break;
case 90:
AssertFatal(fp->threequarter_fs==0,"3/4 sampling impossible for %d MHz band and MU %d\n",bw,mu);
fp->ofdm_symbol_size = 4096;
fp->first_carrier_offset = 2626; //4096 - ( (245*12) / 2 )
fp->nb_prefix_samples0 = 352;
fp->nb_prefix_samples = 288;
break;
case 100:
AssertFatal(fp->threequarter_fs==0,"3/4 sampling impossible for %d MHz band and MU %d\n",bw,mu);
fp->ofdm_symbol_size = 4096;
fp->first_carrier_offset = 2458; //4096 - ( (273*12) / 2 )
fp->nb_prefix_samples0 = 352;
fp->nb_prefix_samples = 288;
break;
default:
AssertFatal(1==0,"%d MHz band undefined for mu %d, frame parms = %p\n", bw, mu, fp);
}
break;
case NR_MU_2: //60kHz scs
fp->subcarrier_spacing = nr_subcarrier_spacing[NR_MU_2];
fp->slots_per_subframe = nr_slots_per_subframe[NR_MU_2];
switch(bw){ //FR1 bands only
case 10:
case 15:
case 20:
case 25:
case 30:
case 40:
case 50:
case 60:
case 70:
case 80:
case 90:
case 100:
default:
AssertFatal(1==0,"%d MHz band undefined for mu %d, frame parms = %p\n", bw, mu, fp);
}
break;
case NR_MU_3:
fp->subcarrier_spacing = nr_subcarrier_spacing[NR_MU_3];
fp->slots_per_subframe = nr_slots_per_subframe[NR_MU_3];
fp->ssb_type = nr_ssb_type_D;
switch(bw){
case 100:
fp->ofdm_symbol_size = 1024;
fp->first_carrier_offset = 628; //1024 - ( (66*12) / 2 )
fp->nb_prefix_samples0 = 136;
fp->nb_prefix_samples = 72;
break;
case 50:
fp->ofdm_symbol_size = 512;
fp->first_carrier_offset = 320; //1024 - ( (66*12) / 2 )
fp->nb_prefix_samples0 = 68;
fp->nb_prefix_samples = 36;
break;
default:
AssertFatal(1==0,"%d MHz band undefined for mu %d, frame parms = %p\n", bw, mu, fp);
}
break;
case NR_MU_4:
......@@ -209,9 +117,21 @@ void set_scs_parameters (NR_DL_FRAME_PARMS *fp, int mu, uint16_t bw)
fp->ssb_type = nr_ssb_type_E;
break;
default:
AssertFatal(1==0,"Invalid numerology index %d", mu);
default:
AssertFatal(1==0,"Invalid numerology index %d", mu);
}
if(fp->threequarter_fs)
fp->ofdm_symbol_size = 3 * 128;
else
fp->ofdm_symbol_size = 4 * 128;
while(fp->ofdm_symbol_size < N_RB_DL * 12)
fp->ofdm_symbol_size <<= 1;
fp->first_carrier_offset = fp->ofdm_symbol_size - (N_RB_DL * 12 / 2);
fp->nb_prefix_samples = fp->ofdm_symbol_size / 128 * 9;
fp->nb_prefix_samples0 = fp->ofdm_symbol_size / 128 * (9 + (1 << mu));
}
uint32_t get_samples_per_slot(int slot, NR_DL_FRAME_PARMS* fp)
......@@ -280,13 +200,13 @@ int nr_init_frame_parms(nfapi_nr_config_request_scf_t* cfg,
fp->half_frame_bit = 0; // half frame bit initialized to 0 here
fp->numerology_index = mu;
set_scs_parameters(fp, mu, cfg->carrier_config.dl_bandwidth.value);
set_scs_parameters(fp, mu, fp->N_RB_DL);
fp->slots_per_frame = 10* fp->slots_per_subframe;
fp->nb_antenna_ports_gNB = cfg->carrier_config.num_tx_ant.value;// It corresponds to pdsch_AntennaPorts
fp->nb_antenna_ports_gNB = 1; // It corresponds to the number of common antenna ports
fp->nb_antennas_rx = cfg->carrier_config.num_rx_ant.value; // It denotes the number of rx antennas at gNB
fp->nb_antennas_tx = 1; // It corresponds to the number of UE Tx antennas
fp->nb_antennas_tx = cfg->carrier_config.num_tx_ant.value; // It corresponds to pdsch_AntennaPorts
fp->symbols_per_slot = ((Ncp == NORMAL)? 14 : 12); // to redefine for different slot formats
fp->samples_per_subframe_wCP = fp->ofdm_symbol_size * fp->symbols_per_slot * fp->slots_per_subframe;
......@@ -334,6 +254,11 @@ int nr_init_frame_parms_ue(NR_DL_FRAME_PARMS *fp,
uint8_t Nid_cell = 0;
int Ncp = NORMAL;
if(fp->nb_antennas_rx == 0)
fp->nb_antennas_rx = 1;
if(fp->nb_antennas_tx == 0)
fp->nb_antennas_tx = 1;
// default values until overwritten by RRCConnectionReconfiguration
fp->nb_antenna_ports_gNB = nb_ant_ports_gNB;
fp->tdd_config = tdd_cfg;
......@@ -373,7 +298,7 @@ int nr_init_frame_parms_ue(NR_DL_FRAME_PARMS *fp,
fp->Ncp = Ncp;
set_scs_parameters(fp,fp->numerology_index,config->carrier_config.dl_bandwidth);
set_scs_parameters(fp, fp->numerology_index, fp->N_RB_DL);
fp->slots_per_frame = 10* fp->slots_per_subframe;
fp->symbols_per_slot = ((Ncp == NORMAL)? 14 : 12); // to redefine for different slot formats
......
openair1/PHY/MODULATION/beamforming.c
View file @ 76273a2a
......@@ -145,7 +145,8 @@ int nr_beam_precoding(int32_t **txdataF,
int slot,
int symbol,
int aa,
int nb_antenna_ports)
int nb_antenna_ports,
int offset)
{
......@@ -155,14 +156,14 @@ int nr_beam_precoding(int32_t **txdataF,
memset(&txdataF_BF[aa][symbol*frame_parms->ofdm_symbol_size],0,sizeof(int32_t)*(frame_parms->ofdm_symbol_size));
for (p=0; p<nb_antenna_ports; p++) {
if ((frame_parms->L_ssb >> (63-p)) & 0x01) {
multadd_cpx_vector((int16_t*)&txdataF[p][symbol*frame_parms->ofdm_symbol_size],
//if ((frame_parms->L_ssb >> (63-p)) & 0x01) {
multadd_cpx_vector((int16_t*)&txdataF[p][(symbol*frame_parms->ofdm_symbol_size)+offset],
(int16_t*)beam_weights[p][aa],
(int16_t*)&txdataF_BF[aa][symbol*frame_parms->ofdm_symbol_size],
0,
frame_parms->ofdm_symbol_size,
15);
}
//}
}
return 0;
}
openair1/PHY/MODULATION/modulation_UE.h
View file @ 76273a2a
......@@ -51,16 +51,13 @@ int slot_fep(PHY_VARS_UE *phy_vars_ue,
int nr_slot_fep(PHY_VARS_NR_UE *phy_vars_ue,
UE_nr_rxtx_proc_t *proc,
unsigned char l,
unsigned char Ns,
int sample_offset,
int no_prefix);
unsigned char Ns);
int nr_slot_fep_init_sync(PHY_VARS_NR_UE *ue,
UE_nr_rxtx_proc_t *proc,
unsigned char symbol,
unsigned char Ns,
int sample_offset,
int no_prefix);
int sample_offset);
int slot_fep_mbsfn(PHY_VARS_UE *phy_vars_ue,
unsigned char l,
......
openair1/PHY/MODULATION/nr_modulation.c
View file @ 76273a2a
This diff is collapsed.
openair1/PHY/MODULATION/nr_modulation.h
View file @ 76273a2a
......@@ -28,7 +28,13 @@
#include "PHY/NR_UE_TRANSPORT/nr_transport_ue.h"
#define DMRS_MOD_ORDER 2
/*Precoding matices: W[pmi][antenna_port][layer]*/
extern char nr_W_1l_2p[6][2][1];
extern char nr_W_2l_2p[3][2][2];
extern char nr_W_1l_4p[28][4][1];
extern char nr_W_2l_4p[22][4][2];
extern char nr_W_3l_4p[7][4][3];
extern char nr_W_4l_4p[5][4][4];
/*! \brief Perform NR modulation. TS 38.211 V15.4.0 subclause 5.1
@param[in] in, Pointer to input bits
@param[in] length, size of input bits
......@@ -74,7 +80,6 @@ void nr_ue_layer_mapping(NR_UE_ULSCH_t **ulsch_ue,
\param symbol symbol within slot (0..12/14)
\param Ns Slot number (0..19)
\param sample_offset offset within rxdata (points to beginning of subframe)
\param no_prefix if 1 prefix is removed by HW
*/
int nr_slot_fep_ul(NR_DL_FRAME_PARMS *frame_parms,
......@@ -82,8 +87,7 @@ int nr_slot_fep_ul(NR_DL_FRAME_PARMS *frame_parms,
int32_t *rxdataF,
unsigned char symbol,
unsigned char Ns,
int sample_offset,
int no_prefix);
int sample_offset);
/*!
\brief This function implements the dft transform precoding in PUSCH
......@@ -100,7 +104,8 @@ int nr_beam_precoding(int32_t **txdataF,
int slot,
int symbol,
int aa,
int nb_antenna_ports
int nb_antenna_ports,
int offset
);
void apply_nr_rotation(NR_DL_FRAME_PARMS *fp,
......@@ -118,4 +123,14 @@ void apply_nr_rotation_ul(NR_DL_FRAME_PARMS *frame_parms,
int first_symbol,
int nsymb,
int length);
/*! \brief Perform NR precoding. TS 38.211 V15.4.0 subclause 6.3.1.5
@param[in] datatx_F_precoding, Pointer to n_layers*re data array
@param[in] prec_matrix, Pointer to precoding matrix
@param[in] n_layers, number of DLSCH layers
*/
int nr_layer_precoder(int16_t **datatx_F_precoding,
char *prec_matrix,
uint8_t n_layers,
int32_t re_offset);
#endif
openair1/PHY/MODULATION/slot_fep_nr.c
View file @ 76273a2a
This diff is collapsed.
openair1/PHY/NR_ESTIMATION/nr_measurements_gNB.c
View file @ 76273a2a
......@@ -37,22 +37,20 @@
int nr_est_timing_advance_pusch(PHY_VARS_gNB* gNB, int UE_id)
{
int temp, i, aa, max_pos = 0, max_val = 0;
short Re, Im;
uint8_t cyclic_shift = 0;
int i, aa, max_pos = 0, max_val = 0;
NR_DL_FRAME_PARMS *frame_parms = &gNB->frame_parms;
NR_gNB_PUSCH *gNB_pusch_vars = gNB->pusch_vars[UE_id];
int32_t **ul_ch_estimates_time = gNB_pusch_vars->ul_ch_estimates_time;
int sync_pos = (frame_parms->ofdm_symbol_size - cyclic_shift*frame_parms->ofdm_symbol_size/12) % (frame_parms->ofdm_symbol_size);
int sync_pos = frame_parms->nb_prefix_samples / 8;
for (i = 0; i < frame_parms->ofdm_symbol_size; i++) {
temp = 0;
int temp = 0;
for (aa = 0; aa < frame_parms->nb_antennas_rx; aa++) {
Re = ((int16_t*)ul_ch_estimates_time[aa])[(i<<1)];
Im = ((int16_t*)ul_ch_estimates_time[aa])[1+(i<<1)];
short Re = ((int16_t*)ul_ch_estimates_time[aa])[(i<<1)];
short Im = ((int16_t*)ul_ch_estimates_time[aa])[1+(i<<1)];
temp += (Re*Re/2) + (Im*Im/2);
}
......
openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
View file @ 76273a2a
......@@ -73,7 +73,7 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
symbol_offset = gNB->frame_parms.ofdm_symbol_size*symbol;
k = bwp_start_subcarrier;
int re_offset = k;
int re_offset;
uint16_t nb_rb_pusch = pusch_pdu->rb_size;
......@@ -170,6 +170,7 @@ int nr_pusch_channel_estimation(PHY_VARS_gNB *gNB,
pil = (int16_t *)&pilot[0];
rxF = (int16_t *)&rxdataF[aarx][(symbol_offset+k+nushift)];
ul_ch = (int16_t *)&ul_ch_estimates[aarx][ch_offset];
re_offset = k;
memset(ul_ch,0,4*(gNB->frame_parms.ofdm_symbol_size));
......
openair1/PHY/NR_TRANSPORT/nr_dlsch.c
View file @ 76273a2a
This diff is collapsed.
openair1/PHY/NR_TRANSPORT/nr_dlsch_coding.c
View file @ 76273a2a
This diff is collapsed.
openair1/PHY/NR_TRANSPORT/nr_prach.c
View file @ 76273a2a
This diff is collapsed.
openair1/PHY/NR_TRANSPORT/nr_ulsch_decoding.c
View file @ 76273a2a
......@@ -320,7 +320,7 @@ void nr_processULSegment(void* arg) {
Kr_bytes = Kr>>3;
K_bits_F = Kr-ulsch_harq->F;
t_nrLDPC_time_stats procTime;
t_nrLDPC_time_stats procTime = {0};
t_nrLDPC_time_stats* p_procTime = &procTime ;
//start_meas(&phy_vars_gNB->ulsch_deinterleaving_stats);
......
openair1/PHY/NR_TRANSPORT/pucch_rx.c
View file @ 76273a2a
......@@ -1604,7 +1604,7 @@ void nr_decode_pucch2(PHY_VARS_gNB *gNB,
re_offset = (12*pucch_pdu->prb_start) + (12*pucch_pdu->bwp_start) + frame_parms->first_carrier_offset;
// estimate CQI for MAC (from antenna port 0 only)
int SNRtimes10 = dB_fixed_times10(signal_energy_nodc(&rxdataF[0][(l2*frame_parms->ofdm_symbol_size)+re_offset],12*pucch_pdu->prb_size)) - (10*gNB->measurements.n0_power_tot_dB);
int cqi;
int cqi,bit_left;
if (SNRtimes10 < -640) cqi=0;
else if (SNRtimes10 > 635) cqi=255;
else cqi=(640+SNRtimes10)/5;
......@@ -1628,7 +1628,8 @@ void nr_decode_pucch2(PHY_VARS_gNB *gNB,
uci_pdu->harq.harq_payload[i] = decodedPayload[0] & 255;
decodedPayload[0]>>=8;
}
uci_pdu->harq.harq_payload[i] = decodedPayload[0] & ((1<<(pucch_pdu->bit_len_harq&7))-1);
bit_left = pucch_pdu->bit_len_harq-((harq_bytes-1)<<3);
uci_pdu->harq.harq_payload[i] = decodedPayload[0] & ((1<<bit_left)-1);
decodedPayload[0] >>= pucch_pdu->bit_len_harq;
}
......@@ -1642,6 +1643,7 @@ void nr_decode_pucch2(PHY_VARS_gNB *gNB,
// csi
if (pucch_pdu->bit_len_csi_part1>0) {
uci_pdu->pduBitmap|=4;
uci_pdu->csi_part1.csi_part1_bit_len=pucch_pdu->bit_len_csi_part1;
int csi_part1_bytes=pucch_pdu->bit_len_csi_part1>>3;
if ((pucch_pdu->bit_len_csi_part1&7) > 0) csi_part1_bytes++;
uci_pdu->csi_part1.csi_part1_payload = (uint8_t*)malloc(csi_part1_bytes);
......@@ -1651,7 +1653,8 @@ void nr_decode_pucch2(PHY_VARS_gNB *gNB,
uci_pdu->csi_part1.csi_part1_payload[i] = decodedPayload[0] & 255;
decodedPayload[0]>>=8;
}
uci_pdu->csi_part1.csi_part1_payload[i] = decodedPayload[0] & ((1<<(pucch_pdu->bit_len_csi_part1&7))-1);
bit_left = pucch_pdu->bit_len_csi_part1-((csi_part1_bytes-1)<<3);
uci_pdu->csi_part1.csi_part1_payload[i] = decodedPayload[0] & ((1<<bit_left)-1);
decodedPayload[0] >>= pucch_pdu->bit_len_csi_part1;
}
......
openair1/PHY/NR_UE_TRANSPORT/dci_nr.c
View file @ 76273a2a
This diff is collapsed.
openair1/PHY/NR_UE_TRANSPORT/nr_dlsch_decoding.c
View file @ 76273a2a
......@@ -261,7 +261,7 @@ uint32_t nr_dlsch_decoding(PHY_VARS_NR_UE *phy_vars_ue,
int8_t llrProcBuf[NR_LDPC_MAX_NUM_LLR] __attribute__ ((aligned(32)));
t_nrLDPC_dec_params decParams;
t_nrLDPC_dec_params* p_decParams = &decParams;
t_nrLDPC_time_stats procTime;
t_nrLDPC_time_stats procTime = {0};
t_nrLDPC_time_stats* p_procTime =&procTime ;
if (!harq_process) {
......@@ -678,7 +678,7 @@ uint32_t nr_dlsch_decoding(PHY_VARS_NR_UE *phy_vars_ue,
memcpy(harq_process->b+offset,
harq_process->c[r],
Kr_bytes- - (harq_process->F>>3) -((harq_process->C>1)?3:0));
Kr_bytes - (harq_process->F>>3) - ((harq_process->C>1)?3:0));
offset += (Kr_bytes - (harq_process->F>>3) - ((harq_process->C>1)?3:0));
if (LOG_DEBUGFLAG(DEBUG_DLSCH_DECOD))
......
openair1/PHY/NR_UE_TRANSPORT/nr_pbch.c
View file @ 76273a2a
This diff is collapsed.
openair1/PHY/NR_UE_TRANSPORT/nr_prach.c
View file @ 76273a2a
This diff is collapsed.
openair1/PHY/defs_gNB.h
View file @ 76273a2a
This diff is collapsed.
openair1/PHY/defs_nr_UE.h
View file @ 76273a2a
This diff is collapsed.
openair1/SCHED_NR/nr_ru_procedures.c
View file @ 76273a2a
This diff is collapsed.
openair1/SCHED_NR/phy_procedures_nr_gNB.c
View file @ 76273a2a
This diff is collapsed.
openair1/SCHED_NR_UE/phy_procedures_nr_ue.c
View file @ 76273a2a
This diff is collapsed.
openair1/SIMULATION/NR_PHY/dlsim.c
View file @ 76273a2a
This diff is collapsed.
openair1/SIMULATION/NR_PHY/pbchsim.c
View file @ 76273a2a
This diff is collapsed.
openair1/SIMULATION/NR_PHY/prachsim.c
View file @ 76273a2a
This diff is collapsed.
openair1/SIMULATION/NR_PHY/ulsim.c
View file @ 76273a2a
This diff is collapsed.
openair1/SIMULATION/TOOLS/random_channel.c
View file @ 76273a2a
This diff is collapsed.
openair2/COMMON/rrc_messages_types.h
View file @ 76273a2a
This diff is collapsed.
openair2/GNB_APP/RRC_nr_paramsvalues.h
View file @ 76273a2a
This diff is collapsed.
openair2/GNB_APP/gnb_config.c
View file @ 76273a2a
This diff is collapsed.
openair2/GNB_APP/gnb_paramdef.h
View file @ 76273a2a
This diff is collapsed.
openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c
View file @ 76273a2a
This diff is collapsed.
openair2/LAYER2/NR_MAC_gNB/config.c
View file @ 76273a2a
This diff is collapsed.
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c
View file @ 76273a2a
This diff is collapsed.
openair2/LAYER2/NR_MAC_gNB/mac_proto.h
View file @ 76273a2a
This diff is collapsed.
openair2/LAYER2/NR_MAC_gNB/nr_mac_gNB.h
View file @ 76273a2a
This diff is collapsed.
openair2/LAYER2/nr_pdcp/nr_pdcp_oai_api.c
View file @ 76273a2a
This diff is collapsed.
openair2/NR_PHY_INTERFACE/NR_IF_Module.c
View file @ 76273a2a
This diff is collapsed.
openair2/RRC/LTE/defs_NB_IoT.h
View file @ 76273a2a
This diff is collapsed.
openair2/RRC/LTE/rrc_defs.h
View file @ 76273a2a
This diff is collapsed.
openair2/RRC/NR/nr_rrc_defs.h
View file @ 76273a2a
This diff is collapsed.
openair2/RRC/NR/nr_rrc_proto.h
View file @ 76273a2a
This diff is collapsed.
openair2/RRC/NR/rrc_gNB.c
View file @ 76273a2a
This diff is collapsed.
openair2/RRC/NR/rrc_gNB_nsa.c
View file @ 76273a2a
This diff is collapsed.
openair2/RRC/NR/rrc_gNB_reconfig.c
View file @ 76273a2a
This diff is collapsed.
openair2/X2AP/x2ap_eNB_generate_messages.c
View file @ 76273a2a
This diff is collapsed.
targets/ARCH/iqplayer/iqplayer_lib.c
View file @ 76273a2a
This diff is collapsed.
targets/ARCH/rfsimulator/simulator.c
View file @ 76273a2a
This diff is collapsed.
targets/PROJECTS/GENERIC-LTE-EPC/CONF/testing_gnb_24PRB.conf 0 → 100644
View file @ 76273a2a
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment