Skip to content

O
OpenXG-RAN
Commit ddf3f9e8 authored by hardy's avatar hardy
Browse files
Options

Merge remote-tracking branch 'origin/NR_FAPI_beamindex_SSB_RO' into integration_2021_wk13_a

parents c5546228 763b3c67
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 9503 additions and 8605 deletions
ci-scripts/conf_files/gnb.band261.tm1.32PRB.usrpn300.conf 0 → 100644
View file @ ddf3f9e8
This diff is collapsed.
ci-scripts/reportTestLocally.sh
View file @ ddf3f9e8
......@@ -749,6 +749,77 @@ function report_test {
echo " </tr>" >> ./test_simulator_results.html
EPC_CONFIGS=("noS1")
TRANS_MODES=("tdd")
FR_MODE=("FR2")
BW_CASES=(32)
for CN_CONFIG in ${EPC_CONFIGS[@]}
do
for TMODE in ${TRANS_MODES[@]}
do
for BW in ${BW_CASES[@]}
do
echo " <tr bgcolor = \"#8FBC8F\" >" >> ./test_simulator_results.html
if [[ $CN_CONFIG =~ .*wS1.* ]]
then
echo " <td align = \"center\" colspan = 4 >Test with EPC (aka withS1): ${TMODE} -- ${BW}PRB -- ${FR_MODE}</td>" >> ./test_simulator_results.html
else
echo " <td align = \"center\" colspan = 4 >Test without EPC (aka noS1): ${TMODE} -- ${BW}PRB -- ${FR_MODE}</td>" >> ./test_simulator_results.html
fi
echo " </tr>" >> ./test_simulator_results.html
#FR2 RA test (--do-ra option)
#build log files names tdd_${PRB}prb_${CN_CONFIG}_gnb_ra_fr2_test.log
RA_ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_gnb_ra_fr2_test.log
RA_UE_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_ue_ra_fr2_test.log
if [ -f $RA_ENB_LOG ] && [ -f $RA_UE_LOG ]
then
#get rid of full path
NAME_ENB=`echo $RA_ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
NAME_UE=`echo $RA_UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
echo " <tr>" >> ./test_simulator_results.html
echo " <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
echo " <td>Check if FR2 RA proc succeeded</td>" >> ./test_simulator_results.html
#gNB RA check
GNB_RECEIVED=`egrep -c "\[RAPROC\] PUSCH with TC_RNTI (.+) received correctly" $RA_ENB_LOG`
#UE RA check
UE_RA_PROC_OK=`egrep -c "\[RAPROC\] RA procedure succeeded" $RA_UE_LOG`
if [ $GNB_RECEIVED -gt 0 ] && [ $UE_RA_PROC_OK -gt 0 ]
then
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
else
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
fi
echo " <td><pre>" >> ./test_simulator_results.html
if [ $GNB_RECEIVED -gt 0 ]
then
echo "<font color = \"blue\">- gNB --> RA received</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- gNB RA NOT RECEIVED</b></font>" >> ./test_simulator_results.html
fi
if [ $UE_RA_PROC_OK -gt 0 ]
then
echo "<font color = \"blue\">- NR UE --> RA procedure succeded</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- NR UE RA procedure failed</b></font>" >> ./test_simulator_results.html
fi
echo " </pre></td>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html
fi
done
done
done
EPC_CONFIGS=("noS1")
FR_MODE=("FR1")
TRANS_MODES=("fdd" "tdd")
BW_CASES=(106)
for CN_CONFIG in ${EPC_CONFIGS[@]}
......@@ -760,13 +831,14 @@ function report_test {
echo " <tr bgcolor = \"#8FBC8F\" >" >> ./test_simulator_results.html
if [[ $CN_CONFIG =~ .*wS1.* ]]
then
echo " <td align = \"center\" colspan = 4 >Test with EPC (aka withS1): ${TMODE} -- ${BW}PRB </td>" >> ./test_simulator_results.html
echo " <td align = \"center\" colspan = 4 >Test with EPC (aka withS1): ${TMODE} -- ${BW}PRB -- ${FR_MODE}</td>" >> ./test_simulator_results.html
else
echo " <td align = \"center\" colspan = 4 >Test without EPC (aka noS1): ${TMODE} -- ${BW}PRB </td>" >> ./test_simulator_results.html
echo " <td align = \"center\" colspan = 4 >Test without EPC (aka noS1): ${TMODE} -- ${BW}PRB -- ${FR_MODE}</td>" >> ./test_simulator_results.html
fi
echo " </tr>" >> ./test_simulator_results.html
#RA test (--do-ra option)
#FR1 RA test (--do-ra option)
#build log files names
RA_ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}prb_${CN_CONFIG}_gnb_ra_test.log
......@@ -778,7 +850,7 @@ function report_test {
NAME_UE=`echo $RA_UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
echo " <tr>" >> ./test_simulator_results.html
echo " <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
echo " <td>Check if RA proc succeeded</td>" >> ./test_simulator_results.html
echo " <td>Check if FR1 RA proc succeeded</td>" >> ./test_simulator_results.html
#gNB RA check
GNB_RECEIVED=`egrep -c "\[RAPROC\] PUSCH with TC_RNTI (.+) received correctly" $RA_ENB_LOG`
......
ci-scripts/runTestOnVM.sh
View file @ ddf3f9e8
......@@ -2189,6 +2189,98 @@ function run_test_on_vm {
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
then
echo "############################################################"
echo "RA TEST FR2"
echo "############################################################"
#RA FR2 test, attention : has a different config file from the rest of the test
CN_CONFIG="noS1"
CONF_FILE=gnb.band261.tm1.32PRB.usrpn300.conf
S1_NOS1_CFG=0
PRB=32
FREQUENCY=28000 #28GHz
if [ ! -d $ARCHIVES_LOC ]
then
mkdir --parents $ARCHIVES_LOC
fi
local try_cnt=0
NR_STATUS=0
######### start of RA TEST loop
while [ $try_cnt -lt 5 ] #5 because it hardly succeed within CI
do
SYNC_STATUS=0
RA_FR2_STATUS=0
rm -f $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}*ra_fr2_test.log
echo "############################################################"
echo "${CN_CONFIG} : Starting the gNB"
echo "############################################################"
CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb_ra_fr2_test.log
#last argument = 1 is to enable --do-ra for RA test
start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG 1
echo "############################################################"
echo "${CN_CONFIG} : Starting the NR-UE"
echo "############################################################"
CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue_ra_fr2_test.log
#last argument = 1 is to enable --do-ra for RA test
start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 1
if [ $NR_UE_SYNC -eq 0 ]
then
echo "Problem w/ gNB and NR-UE not syncing"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
SYNC_STATUS=-1
try_cnt=$((try_cnt+1))
continue
fi
echo "############################################################"
echo "${CN_CONFIG} : Terminate gNB/NR-UE simulators"
echo "############################################################"
sleep 20
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
#check RA markers in gNB and NR UE log files
echo "############################################################"
echo "${CN_CONFIG} : Checking FR2 RA on gNB / NR-UE"
echo "############################################################"
# Proper check to be done when RA test is working!
check_ra_result $ARCHIVES_LOC/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC/$CURRENT_NR_UE_LOG_FILE
if [ $RA_FR2_STATUS -ne 0 ]
then
echo "RA FR2 test NOT OK"
echo "try_cnt = " $try_cnt
try_cnt=$((try_cnt+1))
else
try_cnt=$((try_cnt+10))
fi
done
########### end RA FR2 test
sleep 30
echo "############################################################"
echo "RA TEST FR1"
echo "############################################################"
######### redefine config for the rest of the test
CN_CONFIG="noS1"
CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
S1_NOS1_CFG=0
PRB=106
FREQUENCY=3510
if [ ! -d $ARCHIVES_LOC ]
then
mkdir --parents $ARCHIVES_LOC
......@@ -2258,14 +2350,14 @@ function run_test_on_vm {
#check RA markers in gNB and NR UE log files
echo "############################################################"
echo "${CN_CONFIG} : Checking RA on gNB / NR-UE"
echo "${CN_CONFIG} : Checking FR1 RA on gNB / NR-UE"
echo "############################################################"
# Proper check to be done when RA test is working!
check_ra_result $ARCHIVES_LOC/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC/$CURRENT_NR_UE_LOG_FILE
if [ $RA_STATUS -ne 0 ]
then
echo "RA test NOT OK"
echo "RA FR1 test NOT OK"
echo "try_cnt = " $try_cnt
try_cnt=$((try_cnt+1))
else
......@@ -2401,6 +2493,7 @@ function run_test_on_vm {
echo "Checking run status"
echo "############################################################"
if [ $RA_FR2_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $RA_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $SYNC_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $PING_STATUS -ne 0 ]; then NR_STATUS=-1; fi
......
executables/nr-gnb.c
View file @ ddf3f9e8
......@@ -469,17 +469,16 @@ void init_gNB(int single_thread_flag,int wait_for_sync) {
if (RC.gNB == NULL) {
RC.gNB = (PHY_VARS_gNB **) malloc((1+RC.nb_nr_L1_inst)*sizeof(PHY_VARS_gNB *));
for (inst=0; inst<RC.nb_nr_L1_inst; inst++) {
RC.gNB[inst] = (PHY_VARS_gNB *) malloc(sizeof(PHY_VARS_gNB));
memset((void*)RC.gNB[inst],0,sizeof(PHY_VARS_gNB));
}
LOG_I(PHY,"gNB L1 structure RC.gNB allocated @ %p\n",RC.gNB);
}
LOG_I(PHY,"gNB L1 structure RC.gNB allocated @ %p\n",RC.gNB);
for (inst=0; inst<RC.nb_nr_L1_inst; inst++) {
LOG_I(PHY,"[lte-softmodem.c] gNB structure RC.gNB[%d] allocated @ %p\n",inst,RC.gNB[inst]);
if (RC.gNB[inst] == NULL) {
RC.gNB[inst] = (PHY_VARS_gNB *) malloc(sizeof(PHY_VARS_gNB));
memset((void*)RC.gNB[inst],0,sizeof(PHY_VARS_gNB));
LOG_I(PHY,"[nr-gnb.c] gNB structure RC.gNB[%d] allocated @ %p\n",inst,RC.gNB[inst]);
}
gNB = RC.gNB[inst];
gNB->abstraction_flag = 0;
gNB->single_thread_flag = single_thread_flag;
......@@ -509,7 +508,7 @@ void init_gNB(int single_thread_flag,int wait_for_sync) {
}
LOG_I(PHY,"[nr-softmodem.c] gNB structure allocated\n");
LOG_I(PHY,"[nr-gnb.c] gNB structure allocated\n");
}
......
executables/nr-ru.c
View file @ ddf3f9e8
......@@ -755,17 +755,25 @@ void tx_rf(RU_t *ru,int frame,int slot, uint64_t timestamp) {
if (fp->freq_range==nr_FR2) {
// the beam index is written in bits 8-10 of the flags
// bit 11 enables the gpio programming
// currently we switch beams every 10 slots (should = 1 TDD period in FR2) and we take the beam index of the first symbol of the first slot of this period
int beam=0;
//if (slot==0) beam = 11; //3 for boresight & 8 to enable
if (slot%10==0) {
if (ru->common.beam_id[0][slot*fp->symbols_per_slot] < 8) {
beam = ru->common.beam_id[0][slot*fp->symbols_per_slot] | 8;
}
}
/*
if (slot==0 || slot==40) beam=0&8;
if (slot==10 || slot==50) beam=1&8;
if (slot==20 || slot==60) beam=2&8;
if (slot==30 || slot==70) beam=3&8;
if (slot==0 || slot==40) beam=0|8;
if (slot==10 || slot==50) beam=1|8;
if (slot==20 || slot==60) beam=2|8;
if (slot==30 || slot==70) beam=3|8;
*/
flags |= beam<<8;
}
LOG_D(HW,"slot %d, beam %d\n",slot,ru->common.beam_id[0][slot*fp->symbols_per_slot]);
}
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_WRITE_FLAGS, flags );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_RU, frame );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TTI_NUMBER_TX0_RU, slot );
......@@ -1721,11 +1729,9 @@ void set_function_spec_param(RU_t *ru) {
ru->nr_start_if = NULL; // no if interface
ru->rfdevice.host_type = RAU_HOST;
// FK this here looks messed up. The following lines should be part of the if (ru->function == gNodeB_3GPP), shouldn't they?
ru->fh_south_in = rx_rf; // local synchronous RF RX
ru->fh_south_out = tx_rf; // local synchronous RF TX
ru->start_rf = start_rf; // need to start the local RF interface
ru->fh_south_in = rx_rf; // local synchronous RF RX
ru->fh_south_out = tx_rf; // local synchronous RF TX
ru->start_rf = start_rf; // need to start the local RF interface
ru->stop_rf = stop_rf;
ru->start_write_thread = start_write_thread; // starting RF TX in different thread
printf("configuring ru_id %u (start_rf %p)\n", ru->idx, start_rf);
......
executables/nr-softmodem.c
View file @ ddf3f9e8
......@@ -717,12 +717,11 @@ if(!IS_SOFTMODEM_NOS1)
if(IS_SOFTMODEM_NOS1)
init_pdcp();
if (RC.nb_nr_L1_inst > 0)
RCconfig_NR_L1();
if (RC.nb_nr_inst > 0) {
// don't create if node doesn't connect to RRC/S1/GTP
AssertFatal(create_gNB_tasks(1) == 0,"cannot create ITTI tasks\n");
} else {
printf("No ITTI, Initializing L1\n");
RCconfig_NR_L1();
}
/* Start the agent. If it is turned off in the configuration, it won't start */
......
executables/nr-ue.c
View file @ ddf3f9e8
......@@ -85,12 +85,6 @@
*
*/
#ifndef NO_RAT_NR
#define DURATION_RX_TO_TX (NR_UE_CAPABILITY_SLOT_RX_TO_TX) /* for NR this will certainly depends to such UE capability which is not yet defined */
#else
#define DURATION_RX_TO_TX (6) /* For LTE, this duration is fixed to 4 and it is linked to LTE standard for both modes FDD/TDD */
#endif
typedef enum {
pss = 0,
pbch = 1,
......@@ -632,8 +626,8 @@ void *UE_thread(void *arg) {
}
curMsg->proc.timestamp_tx = timestamp+
UE->frame_parms.get_samples_slot_timestamp(slot_nr,
&UE->frame_parms,DURATION_RX_TO_TX) - firstSymSamp;
UE->frame_parms.get_samples_slot_timestamp(slot_nr,&UE->frame_parms,DURATION_RX_TO_TX)
- firstSymSamp;
notifiedFIFO_elt_t *res;
......@@ -655,8 +649,10 @@ void *UE_thread(void *arg) {
decoded_frame_rx, curMsg->proc.frame_rx );
// use previous timing_advance value to compute writeTimestamp
writeTimestamp = timestamp + UE->frame_parms.get_samples_slot_timestamp(slot_nr, &UE->frame_parms,DURATION_RX_TO_TX - RX_NB_TH) -
firstSymSamp - openair0_cfg[0].tx_sample_advance - UE->N_TA_offset - timing_advance;
writeTimestamp = timestamp+
UE->frame_parms.get_samples_slot_timestamp(slot_nr,&UE->frame_parms,DURATION_RX_TO_TX
- RX_NB_TH) - firstSymSamp - openair0_cfg[0].tx_sample_advance -
UE->N_TA_offset - timing_advance;
// but use current UE->timing_advance value to compute writeBlockSize
if (UE->timing_advance != timing_advance) {
......@@ -685,14 +681,14 @@ void *UE_thread(void *arg) {
}
if (flags || IS_SOFTMODEM_RFSIM)
AssertFatal( writeBlockSize ==
UE->rfdevice.trx_write_func(&UE->rfdevice,
writeTimestamp,
txp,
writeBlockSize,
UE->frame_parms.nb_antennas_tx,
flags),"");
AssertFatal(writeBlockSize ==
UE->rfdevice.trx_write_func(&UE->rfdevice,
writeTimestamp,
txp,
writeBlockSize,
UE->frame_parms.nb_antennas_tx,
flags),"");
for (int i=0; i<UE->frame_parms.nb_antennas_tx; i++)
memset(txp[i], 0, writeBlockSize);
......@@ -731,23 +727,6 @@ void init_NR_UE(int nb_inst, char* rrc_config_path) {
AssertFatal((rrc_inst = nr_l3_init_ue(rrc_config_path)) != NULL, "can not initialize RRC module\n");
AssertFatal((mac_inst = nr_l2_init_ue(rrc_inst)) != NULL, "can not initialize L2 module\n");
AssertFatal((mac_inst->if_module = nr_ue_if_module_init(inst)) != NULL, "can not initialize IF module\n");
NR_PUSCH_TimeDomainResourceAllocationList_t *pusch_TimeDomainAllocationList = NULL;
if (mac_inst->ULbwp[0]->bwp_Dedicated->pusch_Config->choice.setup->pusch_TimeDomainAllocationList) {
pusch_TimeDomainAllocationList = mac_inst->ULbwp[0]->bwp_Dedicated->pusch_Config->choice.setup->pusch_TimeDomainAllocationList->choice.setup;
}
else if (mac_inst->ULbwp[0]->bwp_Common->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList) {
pusch_TimeDomainAllocationList = mac_inst->ULbwp[0]->bwp_Common->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList;
}
if (pusch_TimeDomainAllocationList) {
for(int i = 0; i < pusch_TimeDomainAllocationList->list.count; i++) {
AssertFatal(*pusch_TimeDomainAllocationList->list.array[i]->k2 >= DURATION_RX_TO_TX,
"Slot offset K2 (%ld) cannot be less than DURATION_RX_TO_TX (%d)\n",
*pusch_TimeDomainAllocationList->list.array[i]->k2,
DURATION_RX_TO_TX);
}
}
}
}
......
nfapi/open-nFAPI/nfapi/public_inc/nfapi_nr_interface_scf.h
View file @ ddf3f9e8
......@@ -398,13 +398,13 @@ typedef struct
{
nfapi_uint32_tlv_t ssb_mask;//Bitmap for actually transmitted SSB. MSB->LSB of first 32 bit number corresponds to SSB 0 to SSB 31 MSB->LSB of second 32 bit number corresponds to SSB 32 to SSB 63 Value for each bit: 0: not transmitted 1: transmitted
} nfapi_nr_ssb_mask_size_2_t;
} nfapi_nr_ssb_mask_list_t;
typedef struct
{
nfapi_uint8_tlv_t beam_id[64];//BeamID for each SSB in SsbMask. For example, if SSB mask bit 26 is set to 1, then BeamId[26] will be used to indicate beam ID of SSB 26. Value: from 0 to 63
nfapi_uint8_tlv_t beam_id;//BeamID for each SSB in SsbMask. For example, if SSB mask bit 26 is set to 1, then BeamId[26] will be used to indicate beam ID of SSB 26. Value: from 0 to 63
} nfapi_nr_ssb_mask_size_64_t;
} nfapi_nr_ssb_beam_id_list_t;
typedef struct
{
......@@ -413,8 +413,8 @@ typedef struct
nfapi_uint8_tlv_t ssb_period;//SSB periodicity in msec Value: 0: ms5 1: ms10 2: ms20 3: ms40 4: ms80 5: ms160
nfapi_uint8_tlv_t ssb_subcarrier_offset;//ssbSubcarrierOffset or 𝑘𝑆𝑆𝐵 (38.211, section 7.4.3.1) Value: 0->31
nfapi_uint32_tlv_t MIB;//MIB payload, where the 24 MSB are used and represent the MIB in [38.331 MIB IE] and represent 0 1 2 3 1 , , , ,..., A− a a a a a [38.212, sec 7.1.1]
nfapi_nr_ssb_mask_size_2_t ssb_mask_list[2];
nfapi_nr_ssb_mask_size_64_t* ssb_beam_id_list;//64
nfapi_nr_ssb_mask_list_t ssb_mask_list[2];
nfapi_nr_ssb_beam_id_list_t ssb_beam_id_list[64];
nfapi_uint8_tlv_t ss_pbch_multiple_carriers_in_a_band;//0 = disabled 1 = enabled
nfapi_uint8_tlv_t multiple_cells_ss_pbch_in_a_carrier;//Indicates that multiple cells will be supported in a single carrier 0 = disabled 1 = enabled
......@@ -678,7 +678,7 @@ typedef struct {
} nfapi_nr_slot_indication_scf_t;
// 3.4.2
// 3.4.2
//for pdcch_pdu:
......@@ -691,11 +691,10 @@ typedef struct
typedef struct
{
uint16_t pm_idx;//Index to precoding matrix (PM) pre-stored at cell configuration. Note: If precoding is not used this parameter should be set to 0. Value: 0->65535.
nfapi_nr_dig_bf_interface_t* dig_bf_interface_list;
nfapi_nr_dig_bf_interface_t dig_bf_interface_list[255];//max dig_bf_interfaces
}nfapi_nr_tx_precoding_and_beamforming_number_of_prgs_t;
/*
//table 3-43
typedef struct
{
......@@ -703,23 +702,10 @@ typedef struct
uint16_t prg_size;//Size in RBs of a precoding resource block group (PRG) – to which same precoding and digital beamforming gets applied. Value: 1->275
//watchout: dig_bf_interfaces here, in table 3-53 it's dig_bf_interface
uint8_t dig_bf_interfaces;//Number of STD ant ports (parallel streams) feeding into the digBF Value: 0->255
nfapi_nr_tx_precoding_and_beamforming_number_of_prgs_t* prgs_list;//
nfapi_nr_tx_precoding_and_beamforming_number_of_prgs_t prgs_list[275];//max prg_size
}nfapi_nr_tx_precoding_and_beamforming_t;
*/
typedef struct {
/// Number of PRGs spanning this allocation. Value : 1->275
uint16_t numPRGs;
/// Size in RBs of a precoding resource block group (PRG) – to which same precoding and digital beamforming gets applied. Value: 1->275
uint16_t prgSize;
/// Number of STD ant ports (parallel streams) feeding into the digBF Value: 0->255
uint8_t digBFInterfaces;
// Depends on numPRGs
uint16_t PMIdx[275];
// Depends on digBFInterfaces
uint16_t beamIdx[256];
} nfapi_nr_tx_precoding_and_beamforming_t;
//table 3-37
......@@ -755,16 +741,6 @@ typedef struct {
} nfapi_nr_dl_dci_pdu_t;
typedef struct {
/// Number of PRGs spanning this allocation. Value : 1->275
uint16_t numPRGs;
/// Size in RBs of a precoding resource block group (PRG) – to which same precoding and digital beamforming gets applied. Value: 1->275
uint16_t prgSize;
/// Number of STD ant ports (parallel streams) feeding into the digBF Value: 0->255
uint8_t digBFInterfaces;
uint16_t PMIdx[275];
uint16_t *beamIdx[275];
} nr_beamforming_t;
typedef struct {
///Bandwidth part size [TS38.213 sec12]. Number of contiguous PRBs allocated to the BWP,Value: 1->275
......@@ -1028,7 +1004,7 @@ typedef struct {
typedef struct {
uint16_t PDUType;
uint16_t PDUSize;
uint32_t PDUSize;
union {
nfapi_nr_dl_tti_pdcch_pdu pdcch_pdu;
......
nfapi/open-nFAPI/nfapi/src/nfapi_p7.c
View file @ ddf3f9e8
This diff is collapsed.
openair1/PHY/INIT/nr_init.c
View file @ ddf3f9e8
......@@ -142,6 +142,8 @@ int phy_init_nr_gNB(PHY_VARS_gNB *gNB,
uint32_t ***pdcch_dmrs = gNB->nr_gold_pdcch_dmrs;
AssertFatal(pdcch_dmrs!=NULL, "NR init: pdcch_dmrs malloc failed\n");
gNB->bad_pucch = 0;
for (int slot=0; slot<fp->slots_per_frame; slot++) {
pdcch_dmrs[slot] = (uint32_t **)malloc16(fp->symbols_per_slot*sizeof(uint32_t *));
AssertFatal(pdcch_dmrs[slot]!=NULL, "NR init: pdcch_dmrs for slot %d - malloc failed\n", slot);
......@@ -231,13 +233,15 @@ int phy_init_nr_gNB(PHY_VARS_gNB *gNB,
common_vars->rxdata = (int32_t **)malloc16(Prx*sizeof(int32_t*));
common_vars->txdataF = (int32_t **)malloc16(Ptx*sizeof(int32_t*));
common_vars->rxdataF = (int32_t **)malloc16(Prx*sizeof(int32_t*));
common_vars->beam_id = (uint8_t **)malloc16(Ptx*sizeof(uint8_t*));
for (i=0;i<Ptx;i++){
common_vars->txdataF[i] = (int32_t*)malloc16_clear(fp->samples_per_frame_wCP*sizeof(int32_t)); // [hna] samples_per_frame without CP
LOG_D(PHY,"[INIT] common_vars->txdataF[%d] = %p (%lu bytes)\n",
i,common_vars->txdataF[i],
fp->samples_per_frame_wCP*sizeof(int32_t));
common_vars->beam_id[i] = (uint8_t*)malloc16_clear(fp->symbols_per_slot*fp->slots_per_frame*sizeof(uint8_t));
memset(common_vars->beam_id[i],255,fp->symbols_per_slot*fp->slots_per_frame);
}
for (i=0;i<Prx;i++){
common_vars->rxdataF[i] = (int32_t*)malloc16_clear(fp->samples_per_frame_wCP*sizeof(int32_t));
......@@ -474,7 +478,8 @@ void nr_phy_config_request_sim(PHY_VARS_gNB *gNB,
fp->nr_band = 261;
// fp->threequarter_fs= 0;
}
fp->threequarter_fs = 0;
gNB_config->carrier_config.dl_bandwidth.value = config_bandwidth(mu, N_RB_DL, fp->nr_band);
nr_init_frame_parms(gNB_config, fp);
......
openair1/PHY/INIT/nr_init_ru.c
View file @ ddf3f9e8
......@@ -138,7 +138,7 @@ int nr_phy_init_RU(RU_t *ru) {
for (j=0; j<ru->nb_tx; j++) {
ru->beam_weights[i][p][j] = (int32_t *)malloc16_clear(fp->ofdm_symbol_size*sizeof(int32_t));
for (re=0; re<fp->ofdm_symbol_size; re++)
ru->beam_weights[i][p][j][re] = ru->bw_list[i][l_ind];
ru->beam_weights[i][p][j][re] = ru->bw_list[j][l_ind];
//printf("Beam Weight %08x for beam %d and tx %d\n",ru->bw_list[i][l_ind],p,j);
l_ind++;
} // for j
......@@ -146,6 +146,12 @@ int nr_phy_init_RU(RU_t *ru) {
} // for p
} //for i
}
ru->common.beam_id = (uint8_t**)malloc16_clear(ru->nb_tx*sizeof(uint8_t*));
for(i=0; i< ru->nb_tx; ++i) {
ru->common.beam_id[i] = (uint8_t*)malloc16_clear(fp->symbols_per_slot*fp->slots_per_frame*sizeof(uint8_t));
memset(ru->common.beam_id[i],255,fp->symbols_per_slot*fp->slots_per_frame);
}
} // !=IF5
ru->common.sync_corr = (uint32_t*)malloc16_clear( LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*sizeof(uint32_t)*fp->samples_per_subframe_wCP );
......
openair1/PHY/INIT/nr_init_ue.c
View file @ ddf3f9e8
......@@ -292,7 +292,10 @@ int init_nr_ue_signal(PHY_VARS_NR_UE *ue,
}
}
//PDSCH DMRS init (gNB offset = 0)
ue->scramblingID_pdcch = fp->Nid_cell;
nr_gold_pdcch(ue,fp->Nid_cell);
//PDSCH DMRS init (eNB offset = 0)
ue->nr_gold_pdsch[0] = (uint32_t ****)malloc16(fp->slots_per_frame*sizeof(uint32_t ***));
uint32_t ****pdsch_dmrs = ue->nr_gold_pdsch[0];
......@@ -311,6 +314,12 @@ int init_nr_ue_signal(PHY_VARS_NR_UE *ue,
}
}
// initializing the scrambling IDs for PDSCH DMRS
for (int i=0; i<2; i++)
ue->scramblingID[i]=fp->Nid_cell;
nr_gold_pdsch(ue,ue->scramblingID);
// DLSCH
for (gNB_id = 0; gNB_id < ue->n_connected_gNB; gNB_id++) {
for (th_id=0; th_id<RX_NB_TH_MAX; th_id++) {
......
openair1/PHY/NR_REFSIG/nr_gold_ue.c
View file @ ddf3f9e8
......@@ -52,22 +52,15 @@ void nr_gold_pbch(PHY_VARS_NR_UE* ue)
}
void nr_gold_pdcch(PHY_VARS_NR_UE* ue,
unsigned short n_idDMRS,
unsigned short length_dmrs)
unsigned short nid)
{
unsigned char ns,l;
unsigned int n,x1,x2,x2tmp0;
unsigned int nid;
uint8_t reset;
if (n_idDMRS)
nid = n_idDMRS;
else
nid = ue->frame_parms.Nid_cell;
for (ns=0; ns<ue->frame_parms.slots_per_frame; ns++) {
for (l=0; l<length_dmrs; l++) {
for (l=0; l<ue->frame_parms.symbols_per_slot; l++) {
reset = 1;
x2tmp0 = ((ue->frame_parms.symbols_per_slot*ns+l+1)*((nid<<1)+1))<<17;
......@@ -82,11 +75,10 @@ void nr_gold_pdcch(PHY_VARS_NR_UE* ue,
}
void nr_gold_pdsch(PHY_VARS_NR_UE* ue,
unsigned char ns,
unsigned short *n_idDMRS)
{
unsigned char l;
unsigned int n,x1,x2,x2tmp0;
unsigned int n,x1,x2,x2tmp0,ns;
int nscid;
unsigned int nid;
uint8_t reset;
......@@ -95,23 +87,21 @@ void nr_gold_pdsch(PHY_VARS_NR_UE* ue,
//unsigned short lbar = 0;
for (nscid=0; nscid<2; nscid++) {
if (n_idDMRS)
nid = n_idDMRS[nscid];
else
nid = ue->frame_parms.Nid_cell;
for (ns=0; ns<ue->frame_parms.slots_per_frame; ns++) {
//printf("gold pdsch nid %d lbar %d\n",nid,lbar);
nid = n_idDMRS[nscid];
for (l=0; l<ue->frame_parms.symbols_per_slot; l++) {
for (l=0; l<ue->frame_parms.symbols_per_slot; l++) {
reset = 1;
x2tmp0 = ((ue->frame_parms.symbols_per_slot*ns+l+1)*((nid<<1)+1))<<17;
x2 = (x2tmp0+(nid<<1)+nscid)%(1<<31); //cinit
LOG_D(PHY,"UE DMRS slot %d, symb %d, x2 %x, nscid %d\n",ns,l,x2,nscid);
reset = 1;
x2tmp0 = ((ue->frame_parms.symbols_per_slot*ns+l+1)*((nid<<1)+1))<<17;
x2 = (x2tmp0+(nid<<1)+nscid)%(1<<31); //cinit
LOG_D(PHY,"UE DMRS slot %d, symb %d, x2 %x, nscid %d\n",ns,l,x2,nscid);
for (n=0; n<NR_MAX_PDSCH_DMRS_INIT_LENGTH_DWORD; n++) {
ue->nr_gold_pdsch[0][ns][l][nscid][n] = lte_gold_generic(&x1, &x2, reset);
reset = 0;
for (n=0; n<NR_MAX_PDSCH_DMRS_INIT_LENGTH_DWORD; n++) {
ue->nr_gold_pdsch[0][ns][l][nscid][n] = lte_gold_generic(&x1, &x2, reset);
reset = 0;
}
}
}
}
......
openair1/PHY/NR_REFSIG/refsig_defs_ue.h
View file @ ddf3f9e8
......@@ -57,11 +57,9 @@ int nr_pdsch_dmrs_rx(PHY_VARS_NR_UE *ue,
void nr_gold_pbch(PHY_VARS_NR_UE* ue);
void nr_gold_pdcch(PHY_VARS_NR_UE* ue,
unsigned short n_idDMRS,
unsigned short length_dmrs);
unsigned short n_idDMRS);
void nr_gold_pdsch(PHY_VARS_NR_UE* ue,
unsigned char ns,
unsigned short *n_idDMRS);
void nr_init_pusch_dmrs(PHY_VARS_NR_UE* ue,
......
openair1/PHY/NR_TRANSPORT/nr_dci.c
View file @ ddf3f9e8
......@@ -228,6 +228,7 @@ void nr_generate_dci(PHY_VARS_gNB *gNB,
printf("PDCCH: l %d position %d => (%d,%d)\n",l,k,((int16_t *)txdataF)[(l*frame_parms.ofdm_symbol_size + k)<<1],
((int16_t *)txdataF)[((l*frame_parms.ofdm_symbol_size + k)<<1)+1]);
#endif
dci_idx++;
}
......
openair1/PHY/NR_TRANSPORT/nr_dlsch.c
View file @ ddf3f9e8
......@@ -506,7 +506,25 @@ uint8_t nr_generate_pdsch(PHY_VARS_gNB *gNB,
}
dlsch->slot_tx[slot]=0;
// TODO: handle precoding
// this maps the layers onto antenna ports
// handle beamforming ID
// each antenna port is assigned a beam_index
// since PHY can only handle BF on slot basis we set the whole slot
// first check if this slot has not already been allocated to another beam
if (gNB->common_vars.beam_id[0][slot*frame_parms->symbols_per_slot]==255) {
for (int j=0;j<frame_parms->symbols_per_slot;j++)
gNB->common_vars.beam_id[0][slot*frame_parms->symbols_per_slot+j] = rel15->precodingAndBeamforming.prgs_list[0].dig_bf_interface_list[0].beam_idx;
}
else {
LOG_W(PHY,"beam index for PDSCH allocation already taken\n");
}
}// dlsch loop
return 0;
}
......
openair1/PHY/NR_TRANSPORT/nr_dlsch_coding.c
View file @ ddf3f9e8
......@@ -108,8 +108,6 @@ void free_gNB_dlsch(NR_gNB_DLSCH_t **dlschptr, uint16_t N_RB)
harq->d[r] = NULL;
}
}
free16(harq, sizeof(NR_DL_gNB_HARQ_t));
harq = NULL;
}
}
......
openair1/PHY/NR_TRANSPORT/pucch_rx.c
View file @ ddf3f9e8
......@@ -390,6 +390,7 @@ void nr_decode_pucch0(PHY_VARS_gNB *gNB,
if ((xrtmag_dB<(11+dB_fixed(no_corr))) || (dB_fixed(av_corr)<(13+gNB->measurements.n0_power_tot_dB))) //TODO these are temporary threshold based on measurments with the phone
no_conf=true;
}
gNB->bad_pucch += no_conf;
// first bit of bitmap for sr presence and second bit for acknack presence
uci_pdu->pduBitmap = pucch_pdu->sr_flag | ((pucch_pdu->bit_len_harq>0)<<1);
uci_pdu->pucch_format = 0; // format 0
......
openair1/PHY/NR_UE_ESTIMATION/nr_dl_channel_estimation.c
View file @ ddf3f9e8
......@@ -512,6 +512,13 @@ int nr_pdcch_channel_estimation(PHY_VARS_NR_UE *ue,
fr = filt16a_r1;
// checking if re-initialization of scrambling IDs is needed (should be done here but scrambling ID for PDCCH is not taken from RRC)
/* if (( != ue->scramblingID_pdcch){
ue->scramblingID_pdcch=;
nr_gold_pdsch(ue,ue->scramblingID_pdcch);
}*/
// generate pilot
int pilot[nb_rb_coreset * 3] __attribute__((aligned(16)));
nr_pdcch_dmrs_rx(ue,eNB_offset,Ns,ue->nr_gold_pdcch[eNB_offset][Ns][symbol], &pilot[0],2000,nb_rb_coreset);
......@@ -690,6 +697,14 @@ int nr_pdsch_channel_estimation(PHY_VARS_NR_UE *ue,
uint16_t rb_offset = (bwp_start_subcarrier - ue->frame_parms.first_carrier_offset) / 12 - BWPStart;
uint8_t config_type = ue->dmrs_DownlinkConfig.pdsch_dmrs_type;
int8_t delta = get_delta(p, config_type);
// checking if re-initialization of scrambling IDs is needed
if ((ue->dmrs_DownlinkConfig.scramblingID0 != ue->scramblingID[0]) || (ue->dmrs_DownlinkConfig.scramblingID1 != ue->scramblingID[1])){
ue->scramblingID[0]=ue->dmrs_DownlinkConfig.scramblingID0;
ue->scramblingID[1]=ue->dmrs_DownlinkConfig.scramblingID1;
nr_gold_pdsch(ue,ue->scramblingID);
}
nr_pdsch_dmrs_rx(ue,Ns,ue->nr_gold_pdsch[eNB_offset][Ns][symbol][0], &pilot[0],1000+p,0,nb_rb_pdsch+rb_offset);
if (config_type == pdsch_dmrs_type1){
......
openair1/PHY/NR_UE_TRANSPORT/nr_initial_sync.c
View file @ ddf3f9e8
......@@ -316,7 +316,6 @@ int nr_initial_sync(UE_nr_rxtx_proc_t *proc, PHY_VARS_NR_UE *ue, int n_frames)
ue->init_sync_frame = is;
}
nr_gold_pdcch(ue,0, 2);
/*
int nb_prefix_samples0 = fp->nb_prefix_samples0;
fp->nb_prefix_samples0 = fp->nb_prefix_samples;
......
openair1/PHY/NR_UE_TRANSPORT/pss_nr.c
View file @ ddf3f9e8
......@@ -213,7 +213,7 @@ void generate_pss_nr(NR_DL_FRAME_PARMS *fp,int N_ID_2)
}
for (int n=0; n < LENGTH_PSS_NR; n++) {
int m = (n + 43*N_ID_2)%(LENGTH_PSS_NR);
int m = (n + 43*N_ID_2)%(LENGTH_PSS_NR);
d_pss[n] = 1 - 2*x[m];
}
......
openair1/PHY/defs_RU.h
View file @ ddf3f9e8
......@@ -92,17 +92,17 @@ typedef enum {
typedef struct {
/// \brief Holds the transmit data in the frequency domain.
/// \brief Holds the transmit data in the frequency domain (1 frame).
/// - first index: rx antenna [0..nb_antennas_rx[
/// - second index: ? [0..2*ofdm_symbol_size*frame_parms->symbols_per_tti[
/// - second index: ? [0..samples_per_frame[
int32_t **txdata;
/// \brief holds the transmit data after beamforming in the frequency domain.
/// \brief holds the transmit data after beamforming in the frequency domain (1 slot).
/// - first index: tx antenna [0..nb_antennas_tx[
/// - second index: sample [0..]
/// - second index: sample [0..samples_per_slot_woCP]
int32_t **txdataF_BF;
/// \brief holds the transmit data before beamforming in the frequency domain.
/// - first index: tx antenna [0..nb_antennas_tx[
/// - second index: sample [0..]
/// \brief holds the transmit data before beamforming in the frequency domain (1 frame).
/// - first index: tx antenna [0..nb_antenna_ports[
/// - second index: sample [0..samples_per_frame_woCP]
int32_t **txdataF;
/// \brief holds the transmit data before beamforming for epdcch/mpdcch
/// - first index : tx antenna [0..nb_epdcch_antenna_ports[
......@@ -128,6 +128,10 @@ typedef struct {
/// - second index: tx antenna [0..nb_antennas_tx[
/// - third index: frequency [0..]
int32_t **tdd_calib_coeffs;
/// \brief Anaglogue beam ID for each OFDM symbol (used when beamforming not done in RU)
/// - first index: antenna port
/// - second index: beam_id [0.. symbols_per_frame[
uint8_t **beam_id;
} RU_COMMON;
......
openair1/PHY/defs_gNB.h
View file @ ddf3f9e8
......@@ -387,8 +387,12 @@ typedef struct {
/// For IFFT_FPGA this points to the same memory as PHY_vars->rx_vars[a].RX_DMA_BUFFER. //?
/// - first index: eNB id [0..2] (hard coded)
/// - second index: tx antenna [0..14[ where 14 is the total supported antenna ports.
/// - third index: sample [0..]
/// - third index: sample [0..samples_per_frame_woCP]
int32_t **txdataF;
/// \brief Anaglogue beam ID for each OFDM symbol (used when beamforming not done in RU)
/// - first index: antenna port
/// - second index: beam_id [0.. symbols_per_frame[
uint8_t **beam_id;
int32_t *debugBuff;
int32_t debugBuff_sample_offset;
} NR_gNB_COMMON;
......@@ -793,6 +797,7 @@ typedef struct PHY_VARS_gNB_s {
int prach_energy_counter;
int pucch0_thres;
uint64_t bad_pucch;
/*
time_stats_t phy_proc;
*/
......
openair1/PHY/defs_nr_UE.h
View file @ ddf3f9e8
......@@ -840,9 +840,15 @@ typedef struct {
/// PDSCH DMRS
uint32_t ****nr_gold_pdsch[NUMBER_OF_CONNECTED_eNB_MAX];
// Scrambling IDs used in PDSCH DMRS
uint16_t scramblingID[2];
/// PDCCH DMRS
uint32_t ***nr_gold_pdcch[NUMBER_OF_CONNECTED_eNB_MAX];
// Scrambling IDs used in PDCCH DMRS
uint16_t scramblingID_pdcch;
/// PUSCH DMRS sequence
uint32_t ****nr_gold_pusch_dmrs;
......
openair1/PHY/impl_defs_top.h
View file @ ddf3f9e8
......@@ -275,6 +275,12 @@
#define NR_UE_CAPABILITY_SLOT_RX_TO_TX (6) /* FFS_NR_TODO it defines ue capability which is the number of slots */
/* - between reception of pdsch and tarnsmission of its acknowlegment */
/* - between reception of un uplink grant and its related transmission */
#ifndef NO_RAT_NR
#define DURATION_RX_TO_TX (NR_UE_CAPABILITY_SLOT_RX_TO_TX) /* for NR this will certainly depends to such UE capability which is not yet defined */
#else
#define DURATION_RX_TO_TX (6) /* For LTE, this duration is fixed to 4 and it is linked to LTE standard for both modes FDD/TDD */
#endif
#define NR_MAX_HARQ_PROCESSES (16)
#define NR_MAX_ULSCH_HARQ_PROCESSES (NR_MAX_HARQ_PROCESSES) /* cf 38.214 6.1 UE procedure for receiving the physical uplink shared channel */
......
openair1/SCHED_NR/nr_ru_procedures.c
View file @ ddf3f9e8
......@@ -208,6 +208,7 @@ void nr_feptx_ofdm_2thread(RU_t *ru,int frame_tx,int tti_tx) {
memcpy((void*)&ru->common.txdataF[i][j*fp->ofdm_symbol_size],
(void*)&gNB->common_vars.txdataF[i][j*fp->ofdm_symbol_size + txdataF_offset],
fp->ofdm_symbol_size*sizeof(int32_t));
}
}//num_gNB == 1
......@@ -304,11 +305,20 @@ static void *nr_feptx_thread(void *param) {
txdataF_offset = ((slot%2)*fp->samples_per_slot_wCP);
////////////precoding////////////
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_RU_FEPTX_PREC+feptx->index+1 , 1);
start_meas(&ru->precoding_stats);
for(i=0; i<ru->nb_log_antennas; ++i) {
memcpy((void*) &ru->common.beam_id[i][slot*fp->symbols_per_slot+l],
(void*) &ru->gNB_list[0]->common_vars.beam_id[i][slot*fp->symbols_per_slot+l],
(fp->symbols_per_slot>>1)*sizeof(uint8_t));
}
if (ru->nb_tx == 1 && ru->nb_log_antennas == 1) {
memcpy((void*)&ru->common.txdataF_BF[0][l*fp->ofdm_symbol_size],
(void*)&ru->gNB_list[0]->common_vars.txdataF[0][txdataF_offset + l*fp->ofdm_symbol_size],
(fp->samples_per_slot_wCP>>1)*sizeof(int32_t));
memcpy((void*)&ru->common.txdataF_BF[0][l*fp->ofdm_symbol_size],
(void*)&ru->gNB_list[0]->common_vars.txdataF[0][txdataF_offset + l*fp->ofdm_symbol_size],
(fp->samples_per_slot_wCP>>1)*sizeof(int32_t));
}
else {
bw = ru->beam_weights[0];
......@@ -458,10 +468,14 @@ void nr_feptx_prec(RU_t *ru,int frame_tx,int tti_tx) {
if (nr_slot_select(cfg,frame_tx,slot_tx) == NR_UPLINK_SLOT) return;
for(i=0; i<ru->nb_log_antennas; ++i)
for(i=0; i<ru->nb_log_antennas; ++i) {
memcpy((void*)ru->common.txdataF[i],
(void*)&gNB->common_vars.txdataF[i][txdataF_offset],
fp->samples_per_slot_wCP*sizeof(int32_t));
memcpy((void*)&ru->common.beam_id[i][slot_tx*fp->symbols_per_slot],
(void*)&gNB->common_vars.beam_id[i][slot_tx*fp->symbols_per_slot],
fp->symbols_per_slot*sizeof(uint8_t));
}
if (ru->nb_tx == 1 && ru->nb_log_antennas == 1) {
......
openair1/SCHED_NR/phy_frame_config_nr.c
View file @ ddf3f9e8
......@@ -41,7 +41,7 @@
*
* OUTPUT: table of uplink symbol for each slot for 2 frames
*
* RETURN : 0 if tdd has been properly configurated
* RETURN : nb_periods_per_frame if tdd has been properly configurated
* -1 tdd configuration can not be done
*
* DESCRIPTION : generate bit map for uplink symbol for each slot for several frames
......@@ -179,7 +179,7 @@ int set_tdd_config_nr( nfapi_nr_config_request_scf_t *cfg,
LOG_E(PHY,"set_tdd_configuration_nr: additionnal tdd configuration 2 is not supported for tdd configuration \n");
return (-1);
}*/
return (0);
return (nb_periods_per_frame);
}
/*******************************************************************
......
openair1/SCHED_NR/phy_procedures_nr_gNB.c
View file @ ddf3f9e8
......@@ -72,7 +72,7 @@ void nr_common_signal_procedures (PHY_VARS_gNB *gNB,int frame, int slot) {
NR_DL_FRAME_PARMS *fp=&gNB->frame_parms;
nfapi_nr_config_request_scf_t *cfg = &gNB->gNB_config;
int **txdataF = gNB->common_vars.txdataF;
uint8_t ssb_index, n_hf;
uint8_t ssb_index, ssb_per_slot=0, n_hf;
uint16_t ssb_start_symbol, rel_slot;
int txdataF_offset = (slot%2)*fp->samples_per_slot_wCP;
uint16_t slots_per_hf = (fp->slots_per_frame)>>1;
......@@ -94,11 +94,12 @@ void nr_common_signal_procedures (PHY_VARS_gNB *gNB,int frame, int slot) {
if(rel_slot<38 && rel_slot>=0) { // there is no SSB beyond slot 37
for (int i=0; i<2; i++) { // max two SSB per frame
for (int i=0; i<2; i++) { // max two SSB per slot
ssb_index = i + SSB_Table[rel_slot]; // computing the ssb_index
if ((ssb_index<64) && ((fp->L_ssb >> (63-ssb_index)) & 0x01)) { // generating the ssb only if the bit of L_ssb at current ssb index is 1
ssb_per_slot++;
fp->ssb_index = ssb_index;
int ssb_start_symbol_abs = nr_get_ssb_start_symbol(fp); // computing the starting symbol for current ssb
ssb_start_symbol = ssb_start_symbol_abs % fp->symbols_per_slot; // start symbol wrt slot
......@@ -130,6 +131,16 @@ void nr_common_signal_procedures (PHY_VARS_gNB *gNB,int frame, int slot) {
ssb_start_symbol,
n_hf, frame, cfg, fp);
// SSB beamforming is handled at PHY
// currently our PHY does not support switching more than once a slot.
if (ssb_per_slot>1) {
LOG_W(PHY,"beamforming currently not supported for more than one SSB per slot\n");
}
else if (ssb_per_slot==1) {
LOG_D(PHY,"slot %d, ssb_index %d, beam %d\n",slot,ssb_index,cfg->ssb_table.ssb_beam_id_list[ssb_index].beam_id.value);
for (int j=0;j<fp->symbols_per_slot;j++)
gNB->common_vars.beam_id[0][slot*fp->symbols_per_slot+j] = cfg->ssb_table.ssb_beam_id_list[ssb_index].beam_id.value;
}
}
}
}
......@@ -155,9 +166,10 @@ void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB,
if (do_meas==1) start_meas(&gNB->phy_proc_tx);
// clear the transmit data array for the current subframe
// clear the transmit data array and beam index for the current slot
for (aa=0; aa<cfg->carrier_config.num_tx_ant.value; aa++) {
memset(&gNB->common_vars.txdataF[aa][txdataF_offset],0,fp->samples_per_slot_wCP*sizeof(int32_t));
memset(&gNB->common_vars.beam_id[aa][slot*fp->symbols_per_slot],255,fp->symbols_per_slot*sizeof(uint8_t));
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_gNB_COMMON_TX,1);
......@@ -673,7 +685,10 @@ void phy_procedures_gNB_uespec_RX(PHY_VARS_gNB *gNB, int frame_rx, int slot_rx)
}
}
// figure out a better way to choose slot_rx, 19 is ok for a particular TDD configuration with 30kHz SCS
if ((frame_rx&127) == 0 && slot_rx==19) dump_pusch_stats(gNB);
if ((frame_rx&127) == 0 && slot_rx==19) {
dump_pusch_stats(gNB);
LOG_I(PHY, "Number of bad PUCCH received: %lu\n", gNB->bad_pucch);
}
if (pucch_decode_done || pusch_decode_done) {
T(T_GNB_PHY_PUCCH_PUSCH_IQ, T_INT(frame_rx), T_INT(slot_rx), T_BUFFER(&gNB->common_vars.rxdataF[0][0], gNB->frame_parms.symbols_per_slot * gNB->frame_parms.ofdm_symbol_size * 4));
......
openair1/SCHED_NR_UE/phy_procedures_nr_ue.c
View file @ ddf3f9e8
......@@ -1696,7 +1696,6 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
}
#ifdef NR_PDCCH_SCHED
nr_gold_pdcch(ue, 0, 2);
LOG_D(PHY," ------ --> PDCCH ChannelComp/LLR Frame.slot %d.%d ------ \n", frame_rx%1024, nr_slot_rx);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_SLOT_FEP_PDCCH, VCD_FUNCTION_IN);
......@@ -1754,16 +1753,10 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
NR_DL_UE_HARQ_t *dlsch0_harq = dlsch->harq_processes[harq_pid];
uint16_t nb_symb_sch = dlsch0_harq->nb_symbols;
uint16_t start_symb_sch = dlsch0_harq->start_symbol;
int symb_dmrs = -1;
LOG_D(PHY," ------ --> PDSCH ChannelComp/LLR Frame.slot %d.%d ------ \n", frame_rx%1024, nr_slot_rx);
//to update from pdsch config
for (int i=0;i<4;i++) if (((1<<i)&dlsch0_harq->dlDmrsSymbPos) > 0) {symb_dmrs=i;break;}
AssertFatal(symb_dmrs>=0,"no dmrs in 0..3\n");
LOG_D(PHY,"Initializing dmrs for slot %d DMRS mask %x\n", nr_slot_rx, dlsch0_harq->dlDmrsSymbPos);
nr_gold_pdsch(ue, nr_slot_rx, 0);
for (uint16_t m=start_symb_sch;m<(nb_symb_sch+start_symb_sch) ; m++){
nr_slot_fep(ue,
proc,
......
openair1/SIMULATION/NR_PHY/dlsim.c
View file @ ddf3f9e8
......@@ -831,7 +831,7 @@ int main(int argc, char **argv)
init_nr_ue_transport(UE,0);
nr_gold_pbch(UE);
nr_gold_pdcch(UE,0,2);
nr_gold_pdcch(UE,0);
nr_l2_init_ue(NULL);
UE_mac = get_mac_inst(0);
......
openair1/SIMULATION/NR_PHY/nr_unitary_defs.h
View file @ ddf3f9e8
......@@ -149,13 +149,13 @@ void fill_scc(NR_ServingCellConfigCommon_t *scc,uint64_t *ssb_bitmap,int N_RB_DL
scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->prach_RootSequenceIndex.present=NR_RACH_ConfigCommon__prach_RootSequenceIndex_PR_l139;
scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->prach_RootSequenceIndex.choice.l139=0;
scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->restrictedSetConfig=NR_RACH_ConfigCommon__restrictedSetConfig_unrestrictedSet;
*scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[0]->k2=2;
*scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[0]->k2=6;
scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[0]->mappingType=NR_PUSCH_TimeDomainResourceAllocation__mappingType_typeB;
scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[0]->startSymbolAndLength=55;
*scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[1]->k2=2;
*scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[1]->k2=6;
scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[1]->mappingType=NR_PUSCH_TimeDomainResourceAllocation__mappingType_typeB;
scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[1]->startSymbolAndLength=69;
*scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[2]->k2=2;
*scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[2]->k2=6;
scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[2]->mappingType=NR_PUSCH_TimeDomainResourceAllocation__mappingType_typeB;
scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[2]->startSymbolAndLength=55;
*scc->uplinkConfigCommon->initialUplinkBWP->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[3]->k2=33;
......
openair2/GNB_APP/gnb_app.c
View file @ ddf3f9e8
......@@ -147,8 +147,6 @@ void *gNB_app_task(void *args_p)
LOG_I(PHY, "%s() Task ready initialize structures\n", __FUNCTION__);
RCconfig_NR_L1();
RCconfig_nr_macrlc();
LOG_I(PHY, "%s() RC.nb_nr_L1_inst:%d\n", __FUNCTION__, RC.nb_nr_L1_inst);
......
openair2/GNB_APP/gnb_config.c
View file @ ddf3f9e8
......@@ -581,15 +581,17 @@ void RCconfig_NR_L1(void) {
RC.nb_nr_CC = (int *)malloc((1+RC.nb_nr_inst)*sizeof(int));
RC.nb_nr_CC[0]=1;
RC.nb_nr_inst =1; // DJP - feptx_prec uses num_gNB but phy_init_RU uses nb_nr_inst
LOG_I(PHY,"%s() NFAPI PNF mode - RC.nb_nr_inst=1 this is because phy_init_RU() uses that to index and not RC.num_gNB - why the 2 similar variables?\n", __FUNCTION__);
LOG_I(PHY,"%s() NFAPI PNF mode - RC.nb_nr_CC[0]=%d for init_gNB_afterRU()\n", __FUNCTION__, RC.nb_nr_CC[0]);
LOG_I(PHY,"%s() NFAPI PNF mode - RC.nb_nr_macrlc_inst:%d because used by mac_top_init_gNB()\n", __FUNCTION__, RC.nb_nr_macrlc_inst);
mac_top_init_gNB();
configure_nr_nfapi_pnf(RC.gNB[j]->eth_params_n.remote_addr, RC.gNB[j]->eth_params_n.remote_portc, RC.gNB[j]->eth_params_n.my_addr, RC.gNB[j]->eth_params_n.my_portd, RC.gNB[j]->eth_params_n .remote_portd);
configure_nr_nfapi_pnf(RC.gNB[j]->eth_params_n.remote_addr,
RC.gNB[j]->eth_params_n.remote_portc,
RC.gNB[j]->eth_params_n.my_addr,
RC.gNB[j]->eth_params_n.my_portd,
RC.gNB[j]->eth_params_n.remote_portd);
}else { // other midhaul
}
}// for (j = 0; j < RC.nb_nr_L1_inst; j++)
......
openair2/LAYER2/NR_MAC_COMMON/nr_mac_common.c
View file @ ddf3f9e8
......@@ -2273,7 +2273,7 @@ uint8_t get_L_ptrs(uint8_t mcs1, uint8_t mcs2, uint8_t mcs3, uint8_t I_mcs, uint
mcs4 = 28;
if (I_mcs < mcs1) {
LOG_I(PHY, "PUSH PT-RS is not present.\n");
LOG_D(PHY, "PUSH PT-RS is not present.\n");
return -1;
} else if (I_mcs >= mcs1 && I_mcs < mcs2)
return 2;
......@@ -2303,7 +2303,7 @@ uint8_t get_L_ptrs(uint8_t mcs1, uint8_t mcs2, uint8_t mcs3, uint8_t I_mcs, uint
uint8_t get_K_ptrs(uint16_t nrb0, uint16_t nrb1, uint16_t N_RB) {
if (N_RB < nrb0) {
LOG_I(PHY,"PUSH PT-RS is not present.\n");
LOG_D(PHY,"PUSH PT-RS is not present.\n");
return -1;
} else if (N_RB >= nrb0 && N_RB < nrb1)
return 2;
......
openair2/LAYER2/NR_MAC_UE/nr_ue_procedures.c
View file @ ddf3f9e8
......@@ -101,7 +101,7 @@ int8_t nr_ue_decode_mib(module_id_t module_id,
void *pduP,
uint16_t cell_id)
{
LOG_I(MAC,"[L2][MAC] decode mib\n");
LOG_D(MAC,"[L2][MAC] decode mib\n");
NR_UE_MAC_INST_t *mac = get_mac_inst(module_id);
......@@ -449,8 +449,9 @@ int nr_ue_process_dci_indication_pdu(module_id_t module_id,int cc_id, int gNB_in
LOG_D(MAC,"Received dci indication (rnti %x,dci format %d,n_CCE %d,payloadSize %d,payload %llx)\n",
dci->rnti,dci->dci_format,dci->n_CCE,dci->payloadSize,*(unsigned long long*)dci->payloadBits);
uint32_t dci_format = nr_extract_dci_info(mac, dci->dci_format, dci->payloadSize, dci->rnti, (uint64_t *)dci->payloadBits, def_dci_pdu_rel15);
return (nr_ue_process_dci(module_id, cc_id, gNB_index, frame, slot, def_dci_pdu_rel15, dci->rnti, dci_format));
if (nr_extract_dci_info(mac, dci->dci_format, dci->payloadSize, dci->rnti, (uint64_t *)dci->payloadBits, def_dci_pdu_rel15))
return -1;
return (nr_ue_process_dci(module_id, cc_id, gNB_index, frame, slot, def_dci_pdu_rel15, dci->rnti, dci->dci_format));
}
int8_t nr_ue_process_dci(module_id_t module_id, int cc_id, uint8_t gNB_index, frame_t frame, int slot, dci_pdu_rel15_t *dci, uint16_t rnti, uint8_t dci_format){
......@@ -1129,11 +1130,11 @@ int get_n_rb(NR_UE_MAC_INST_t *mac, int rnti_type){
}
uint8_t nr_extract_dci_info(NR_UE_MAC_INST_t *mac,
uint8_t dci_format,
uint8_t dci_size,
uint16_t rnti,
uint64_t *dci_pdu,
dci_pdu_rel15_t *dci_pdu_rel15) {
uint8_t dci_format,
uint8_t dci_size,
uint16_t rnti,
uint64_t *dci_pdu,
dci_pdu_rel15_t *dci_pdu_rel15) {
int rnti_type = get_rnti_type(mac, rnti);
......@@ -1147,32 +1148,6 @@ uint8_t nr_extract_dci_info(NR_UE_MAC_INST_t *mac,
int pos=0;
int fsize=0;
if (rnti_type == NR_RNTI_C) {
// First find out the DCI format from the first bit (UE performed blind decoding)
pos++;
dci_pdu_rel15->format_indicator = (*dci_pdu>>(dci_size-pos))&1;
#ifdef DEBUG_EXTRACT_DCI
LOG_D(MAC,"Format indicator %d (%d bits) N_RB_BWP %d => %d (0x%lx)\n",dci_pdu_rel15->format_indicator,1,N_RB,dci_size-pos,*dci_pdu);
#endif
if (dci_format == NR_UL_DCI_FORMAT_0_0 || dci_format == NR_DL_DCI_FORMAT_1_0) {
if (dci_pdu_rel15->format_indicator == 0)
dci_format = NR_UL_DCI_FORMAT_0_0;
else
dci_format = NR_DL_DCI_FORMAT_1_0;
}
else if (dci_format == NR_UL_DCI_FORMAT_0_1 || dci_format == NR_DL_DCI_FORMAT_1_1) {
// In case the sizes of formats 0_1 and 1_1 happen to be the same
if (dci_pdu_rel15->format_indicator == 0)
dci_format = NR_UL_DCI_FORMAT_0_1;
else
dci_format = NR_DL_DCI_FORMAT_1_1;
}
}
#ifdef DEBUG_EXTRACT_DCI
LOG_D(MAC, "DCI format is %d\n", dci_format);
#endif
switch(dci_format) {
case NR_DL_DCI_FORMAT_1_0:
......@@ -1213,7 +1188,15 @@ uint8_t nr_extract_dci_info(NR_UE_MAC_INST_t *mac,
break;
case NR_RNTI_C:
//Identifier for DCI formats
pos++;
dci_pdu_rel15->format_indicator = (*dci_pdu>>(dci_size-pos))&1;
if (dci_pdu_rel15->format_indicator == 0)
return 1; // discard dci, format indicator not corresponding to dci_format
#ifdef DEBUG_EXTRACT_DCI
LOG_D(MAC,"Format indicator %d (%d bits) N_RB_BWP %d => %d (0x%lx)\n",dci_pdu_rel15->format_indicator,1,N_RB,dci_size-pos,*dci_pdu);
#endif
// Freq domain assignment (275rb >> fsize = 16)
fsize = (int)ceil( log2( (N_RB*(N_RB+1))>>1 ) );
pos+=fsize;
......@@ -1395,6 +1378,8 @@ uint8_t nr_extract_dci_info(NR_UE_MAC_INST_t *mac,
// indicating a DL DCI format 1bit
pos++;
dci_pdu_rel15->format_indicator = (*dci_pdu>>(dci_size-pos))&1;
if (dci_pdu_rel15->format_indicator == 0)
return 1; // discard dci, format indicator not corresponding to dci_format
// Freq domain assignment 0-16 bit
fsize = (int)ceil( log2( (N_RB*(N_RB+1))>>1 ) );
pos+=fsize;
......@@ -1433,6 +1418,11 @@ uint8_t nr_extract_dci_info(NR_UE_MAC_INST_t *mac,
switch(rnti_type)
{
case NR_RNTI_C:
//Identifier for DCI formats
pos++;
dci_pdu_rel15->format_indicator = (*dci_pdu>>(dci_size-pos))&1;
if (dci_pdu_rel15->format_indicator == 1)
return 1; // discard dci, format indicator not corresponding to dci_format
fsize = (int)ceil( log2( (N_RB_UL*(N_RB_UL+1))>>1 ) );
pos+=fsize;
dci_pdu_rel15->frequency_domain_assignment.val = (*dci_pdu>>(dci_size-pos))&((1<<fsize)-1);
......@@ -1508,6 +1498,11 @@ uint8_t nr_extract_dci_info(NR_UE_MAC_INST_t *mac,
switch(rnti_type)
{
case NR_RNTI_C:
//Identifier for DCI formats
pos++;
dci_pdu_rel15->format_indicator = (*dci_pdu>>(dci_size-pos))&1;
if (dci_pdu_rel15->format_indicator == 0)
return 1; // discard dci, format indicator not corresponding to dci_format
// Carrier indicator
pos+=dci_pdu_rel15->carrier_indicator.nbits;
dci_pdu_rel15->carrier_indicator.val = (*dci_pdu>>(dci_size-pos))&((1<<dci_pdu_rel15->carrier_indicator.nbits)-1);
......@@ -1593,6 +1588,11 @@ uint8_t nr_extract_dci_info(NR_UE_MAC_INST_t *mac,
switch(rnti_type)
{
case NR_RNTI_C:
//Identifier for DCI formats
pos++;
dci_pdu_rel15->format_indicator = (*dci_pdu>>(dci_size-pos))&1;
if (dci_pdu_rel15->format_indicator == 1)
return 1; // discard dci, format indicator not corresponding to dci_format
// Carrier indicator
pos+=dci_pdu_rel15->carrier_indicator.nbits;
dci_pdu_rel15->carrier_indicator.val = (*dci_pdu>>(dci_size-pos))&((1<<dci_pdu_rel15->carrier_indicator.nbits)-1);
......@@ -1701,7 +1701,7 @@ uint8_t nr_extract_dci_info(NR_UE_MAC_INST_t *mac,
break;
}
return dci_format;
return 0;
}
///////////////////////////////////
......
openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c
View file @ ddf3f9e8
......@@ -109,7 +109,11 @@ long get_k2(NR_UE_MAC_INST_t *mac, uint8_t time_domain_ind) {
}
k2 = *pusch_TimeDomainAllocationList->list.array[time_domain_ind]->k2;
}
AssertFatal(k2 >= DURATION_RX_TO_TX,
"Slot offset K2 (%ld) cannot be less than DURATION_RX_TO_TX (%d)\n",
k2,DURATION_RX_TO_TX);
LOG_D(MAC, "get_k2(): k2 is %ld\n", k2);
return k2;
}
......@@ -997,6 +1001,10 @@ int nr_ue_pusch_scheduler(NR_UE_MAC_INST_t *mac,
break;
}
AssertFatal((k2+delta) >= DURATION_RX_TO_TX,
"Slot offset (%d) for Msg3 cannot be less than DURATION_RX_TO_TX (%d)\n",
k2+delta,DURATION_RX_TO_TX);
*slot_tx = (current_slot + k2 + delta) % nr_slots_per_frame[mu];
if (current_slot + k2 + delta > nr_slots_per_frame[mu]){
*frame_tx = (current_frame + 1) % 1024;
......
openair2/LAYER2/NR_MAC_gNB/config.c
View file @ ddf3f9e8
......@@ -264,15 +264,28 @@ void config_common(int Mod_idP, int pdsch_AntennaPorts, int pusch_AntennaPorts,
cfg->ssb_table.ssb_mask_list[0].ssb_mask.tl.tag = NFAPI_NR_CONFIG_SSB_MASK_TAG;
cfg->ssb_table.ssb_mask_list[1].ssb_mask.tl.tag = NFAPI_NR_CONFIG_SSB_MASK_TAG;
cfg->num_tlv++;
cfg->num_tlv+=2;
cfg->carrier_config.num_tx_ant.value = pdsch_AntennaPorts;
AssertFatal(pdsch_AntennaPorts > 0 && pdsch_AntennaPorts < 13, "pdsch_AntennaPorts in 1...12\n");
cfg->carrier_config.num_tx_ant.tl.tag = NFAPI_NR_CONFIG_NUM_TX_ANT_TAG;
int num_ssb=0;
for (int i=0;i<32;i++) {
num_ssb += (cfg->ssb_table.ssb_mask_list[0].ssb_mask.value>>i)&1;
num_ssb += (cfg->ssb_table.ssb_mask_list[1].ssb_mask.value>>i)&1;
cfg->ssb_table.ssb_beam_id_list[i].beam_id.tl.tag = NFAPI_NR_CONFIG_BEAM_ID_TAG;
if ((cfg->ssb_table.ssb_mask_list[0].ssb_mask.value>>(31-i))&1) {
cfg->ssb_table.ssb_beam_id_list[i].beam_id.value = num_ssb;
num_ssb++;
}
cfg->num_tlv++;
}
for (int i=0;i<32;i++) {
cfg->ssb_table.ssb_beam_id_list[32+i].beam_id.tl.tag = NFAPI_NR_CONFIG_BEAM_ID_TAG;
if ((cfg->ssb_table.ssb_mask_list[1].ssb_mask.value>>(31-i))&1) {
cfg->ssb_table.ssb_beam_id_list[32+i].beam_id.value = num_ssb;
num_ssb++;
}
cfg->num_tlv++;
}
cfg->carrier_config.num_rx_ant.value = pusch_AntennaPorts;
......@@ -296,17 +309,19 @@ void config_common(int Mod_idP, int pdsch_AntennaPorts, int pusch_AntennaPorts,
}
if(cfg->cell_config.frame_duplex_type.value == TDD){
LOG_I(MAC,"Setting TDD configuration period to %d\n",cfg->tdd_table.tdd_period.value);
int return_tdd = set_tdd_config_nr(cfg,
scc->uplinkConfigCommon->frequencyInfoUL->scs_SpecificCarrierList.list.array[0]->subcarrierSpacing,
scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofDownlinkSlots,
scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofDownlinkSymbols,
scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofUplinkSlots,
scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofUplinkSymbols);
if (return_tdd != 0)
int periods_per_frame = set_tdd_config_nr(cfg,
scc->uplinkConfigCommon->frequencyInfoUL->scs_SpecificCarrierList.list.array[0]->subcarrierSpacing,
scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofDownlinkSlots,
scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofDownlinkSymbols,
scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofUplinkSlots,
scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofUplinkSymbols);
if (periods_per_frame < 0)
LOG_E(MAC,"TDD configuration can not be done\n");
else
LOG_I(MAC,"TDD has been properly configurated\n");
else {
LOG_I(MAC,"TDD has been properly configurated\n");
RC.nrmac[Mod_idP]->tdd_beam_association = (int16_t *)malloc16(periods_per_frame*sizeof(int16_t));
}
}
}
......
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c
View file @ ddf3f9e8
......@@ -301,6 +301,7 @@ void schedule_nr_SRS(module_id_t module_idP, frame_t frameP, sub_frame_t subfram
bool is_xlsch_in_slot(uint64_t bitmap, sub_frame_t slot) {
if (slot>64) return false; //quickfix for FR2 where there are more than 64 slots (bitmap to be removed)
return (bitmap >> slot) & 0x01;
}
......@@ -357,6 +358,12 @@ void gNB_dlsch_ulsch_scheduler(module_id_t module_idP,
AssertFatal(1==0,"Undefined tdd period %ld\n", scc->tdd_UL_DL_ConfigurationCommon->pattern1.dl_UL_TransmissionPeriodicity);
}
if (slot==0 && (*scc->downlinkConfigCommon->frequencyInfoDL->frequencyBandList.list.array[0]>=257)) {
// re-initialization of tdd_beam_association at beginning of frame (only for FR2)
for (int i=0; i<nb_periods_per_frame; i++)
gNB->tdd_beam_association[i] = -1;
}
int num_slots_per_tdd = (nr_slots_per_frame[*scc->ssbSubcarrierSpacing])/nb_periods_per_frame;
const int nr_ulmix_slots = tdd_pattern->nrofUplinkSlots + (tdd_pattern->nrofUplinkSymbols!=0);
......@@ -410,7 +417,7 @@ void gNB_dlsch_ulsch_scheduler(module_id_t module_idP,
// This schedules MIB
schedule_nr_mib(module_idP, frame, slot, nr_slots_per_frame[*scc->ssbSubcarrierSpacing]);
schedule_nr_mib(module_idP, frame, slot, nr_slots_per_frame[*scc->ssbSubcarrierSpacing],nb_periods_per_frame);
// This schedules SIB1
if ( get_softmodem_params()->sa == 1 )
......
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c
View file @ ddf3f9e8
......@@ -385,7 +385,9 @@ void nr_schedule_msg2(uint16_t rach_frame, uint16_t rach_slot,
uint16_t *msg2_frame, uint16_t *msg2_slot,
NR_ServingCellConfigCommon_t *scc,
uint16_t monitoring_slot_period,
uint16_t monitoring_offset,uint8_t index,uint8_t num_active_ssb){
uint16_t monitoring_offset,uint8_t beam_index,
uint8_t num_active_ssb,
int16_t *tdd_beam_association){
// preferentially we schedule the msg2 in the mixed slot or in the last dl slot
// if they are allowed by search space configuration
......@@ -402,18 +404,6 @@ void nr_schedule_msg2(uint16_t rach_frame, uint16_t rach_slot,
if ((scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofDownlinkSymbols > 0) || (scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofUplinkSymbols > 0))
tdd_period_slot++;
// computing start of next period
uint8_t start_next_period = (rach_slot-(rach_slot%tdd_period_slot)+tdd_period_slot)%nr_slots_per_frame[mu];
*msg2_slot = start_next_period + last_dl_slot_period; // initializing scheduling of slot to next mixed (or last dl) slot
*msg2_frame = (*msg2_slot>(rach_slot))? rach_frame : (rach_frame +1);
// we can't schedule msg2 before sl_ahead since prach
int eff_slot = *msg2_slot+(*msg2_frame-rach_frame)*nr_slots_per_frame[mu];
if ((eff_slot-rach_slot)<=sl_ahead) {
*msg2_slot = (*msg2_slot+tdd_period_slot)%nr_slots_per_frame[mu];
*msg2_frame = (*msg2_slot>(rach_slot))? rach_frame : (rach_frame +1);
}
switch(response_window){
case NR_RACH_ConfigGeneric__ra_ResponseWindow_sl1:
slot_window = 1;
......@@ -448,6 +438,31 @@ void nr_schedule_msg2(uint16_t rach_frame, uint16_t rach_slot,
uint8_t slot_limit = (rach_slot + slot_window)%nr_slots_per_frame[mu];
uint8_t frame_limit = (slot_limit>(rach_slot))? rach_frame : (rach_frame +1);
// computing start of next period
int FR = *scc->downlinkConfigCommon->frequencyInfoDL->frequencyBandList.list.array[0] >= 257 ? nr_FR2 : nr_FR1;
uint8_t start_next_period = (rach_slot-(rach_slot%tdd_period_slot)+tdd_period_slot)%nr_slots_per_frame[mu];
*msg2_slot = start_next_period + last_dl_slot_period; // initializing scheduling of slot to next mixed (or last dl) slot
*msg2_frame = (*msg2_slot>(rach_slot))? rach_frame : (rach_frame +1);
// we can't schedule msg2 before sl_ahead since prach
int eff_slot = *msg2_slot+(*msg2_frame-rach_frame)*nr_slots_per_frame[mu];
if ((eff_slot-rach_slot)<=sl_ahead) {
*msg2_slot = (*msg2_slot+tdd_period_slot)%nr_slots_per_frame[mu];
*msg2_frame = (*msg2_slot>(rach_slot))? rach_frame : (rach_frame +1);
}
if (FR==nr_FR2) {
int num_tdd_period = *msg2_slot/tdd_period_slot;
while((tdd_beam_association[num_tdd_period]!=-1)&&(tdd_beam_association[num_tdd_period]!=beam_index)) {
*msg2_slot = (*msg2_slot+tdd_period_slot)%nr_slots_per_frame[mu];
*msg2_frame = (*msg2_slot>(rach_slot))? rach_frame : (rach_frame +1);
num_tdd_period = *msg2_slot/tdd_period_slot;
}
if(tdd_beam_association[num_tdd_period] == -1)
tdd_beam_association[num_tdd_period] = beam_index;
}
// go to previous slot if the current scheduled slot is beyond the response window
// and if the slot is not among the PDCCH monitored ones (38.213 10.1)
while (((*msg2_slot>slot_limit)&&(*msg2_frame>frame_limit)) || ((*msg2_frame*nr_slots_per_frame[mu]+*msg2_slot-monitoring_offset)%monitoring_slot_period !=0)) {
......@@ -499,7 +514,6 @@ void nr_initiate_ra_proc(module_id_t module_idP,
break;
}
}
if (pr_found == 0) {
continue;
}
......@@ -570,7 +584,8 @@ void nr_initiate_ra_proc(module_id_t module_idP,
monitoring_slot_period,
monitoring_offset,
beam_index,
cc->num_active_ssb);
cc->num_active_ssb,
nr_mac->tdd_beam_association);
ra->Msg2_frame = msg2_frame;
ra->Msg2_slot = msg2_slot;
......@@ -645,7 +660,8 @@ void nr_get_Msg3alloc(module_id_t module_id,
NR_BWP_Uplink_t *ubwp,
sub_frame_t current_slot,
frame_t current_frame,
NR_RA_t *ra) {
NR_RA_t *ra,
int16_t *tdd_beam_association) {
// msg3 is schedulend in mixed slot in the following TDD period
......@@ -675,6 +691,18 @@ void nr_get_Msg3alloc(module_id_t module_id,
else
ra->Msg3_frame = current_frame + (temp_slot/nr_slots_per_frame[mu]);
// beam association for FR2
if (*scc->downlinkConfigCommon->frequencyInfoDL->frequencyBandList.list.array[0] >= 257) {
uint8_t tdd_period_slot = scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofDownlinkSlots + scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofUplinkSlots;
if ((scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofDownlinkSymbols > 0) || (scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofUplinkSymbols > 0))
tdd_period_slot++;
int num_tdd_period = ra->Msg3_slot/tdd_period_slot;
if((tdd_beam_association[num_tdd_period]!=-1)&&(tdd_beam_association[num_tdd_period]!=ra->beam_id))
AssertFatal(1==0,"Cannot schedule MSG3\n");
else
tdd_beam_association[num_tdd_period] = ra->beam_id;
}
LOG_I(MAC, "[RAPROC] Msg3 slot %d: current slot %u Msg3 frame %u k2 %u Msg3_tda_id %u start symbol index %u\n", ra->Msg3_slot, current_slot, ra->Msg3_frame, k2,ra->Msg3_tda_id, StartSymbolIndex);
uint16_t *vrb_map_UL =
&RC.nrmac[module_id]->common_channels[CC_id].vrb_map_UL[ra->Msg3_slot * MAX_BWP_SIZE];
......@@ -987,6 +1015,12 @@ void nr_generate_Msg2(module_id_t module_idP, int CC_id, frame_t frameP, sub_fra
pdsch_pdu_rel15->NrOfSymbols = NrOfSymbols;
pdsch_pdu_rel15->dlDmrsSymbPos = fill_dmrs_mask(NULL, scc->dmrs_TypeA_Position, NrOfSymbols);
pdsch_pdu_rel15->precodingAndBeamforming.num_prgs=1;
pdsch_pdu_rel15->precodingAndBeamforming.prg_size=275;
pdsch_pdu_rel15->precodingAndBeamforming.dig_bf_interfaces=1;
pdsch_pdu_rel15->precodingAndBeamforming.prgs_list[0].pm_idx = 0;
pdsch_pdu_rel15->precodingAndBeamforming.prgs_list[0].dig_bf_interface_list[0].beam_idx = ra->beam_id;
/* Fill PDCCH DL DCI PDU */
nfapi_nr_dl_dci_pdu_t *dci_pdu = &pdcch_pdu_rel15->dci_pdu[pdcch_pdu_rel15->numDlDci];
pdcch_pdu_rel15->numDlDci++;
......@@ -1003,7 +1037,7 @@ void nr_generate_Msg2(module_id_t module_idP, int CC_id, frame_t frameP, sub_fra
dci_pdu_rel15_t dci_payload;
dci_payload.frequency_domain_assignment.val = PRBalloc_to_locationandbandwidth0(pdsch_pdu_rel15->rbSize,
pdsch_pdu_rel15->rbStart,dci10_bw);
pdsch_pdu_rel15->rbStart,dci10_bw);
dci_payload.time_domain_assignment.val = time_domain_assignment;
dci_payload.vrb_to_prb_mapping.val = 0;
dci_payload.mcs = pdsch_pdu_rel15->mcsIndex[0];
......@@ -1054,11 +1088,11 @@ void nr_generate_Msg2(module_id_t module_idP, int CC_id, frame_t frameP, sub_fra
nr_mac->TX_req[CC_id].Slot = slotP;
// Program UL processing for Msg3
nr_get_Msg3alloc(module_idP, CC_id, scc, ubwp, slotP, frameP, ra);
LOG_I(MAC, "Frame %d, Subframe %d: Setting Msg3 reception for Frame %d Subframe %d\n", frameP, slotP, ra->Msg3_frame, ra->Msg3_slot);
nr_get_Msg3alloc(module_idP, CC_id, scc, ubwp, slotP, frameP, ra, nr_mac->tdd_beam_association);
LOG_I(MAC, "Frame %d, Slot %d: Setting Msg3 reception for Frame %d Slot %d\n", frameP, slotP, ra->Msg3_frame, ra->Msg3_slot);
nr_add_msg3(module_idP, CC_id, frameP, slotP, ra, (uint8_t *) &tx_req->TLVs[0].value.direct[0]);
ra->state = WAIT_Msg3;
LOG_I(MAC,"[gNB %d][RAPROC] Frame %d, Subframe %d: RA state %d\n", module_idP, frameP, slotP, ra->state);
LOG_I(MAC,"[gNB %d][RAPROC] Frame %d, Slot %d: RA state %d\n", module_idP, frameP, slotP, ra->state);
x_Overhead = 0;
nr_get_tbs_dl(&dl_tti_pdsch_pdu->pdsch_pdu, x_Overhead, pdsch_pdu_rel15->numDmrsCdmGrpsNoData, dci_payload.tb_scaling);
......
openair2/LAYER2/NR_MAC_gNB/mac_proto.h
View file @ ddf3f9e8
......@@ -85,7 +85,11 @@ void nr_simple_dlsch_preprocessor(module_id_t module_id,
frame_t frame,
sub_frame_t slot);
void schedule_nr_mib(module_id_t module_idP, frame_t frameP, sub_frame_t subframeP, uint8_t slots_per_frame);
void schedule_nr_mib(module_id_t module_idP,
frame_t frameP,
sub_frame_t subframeP,
uint8_t slots_per_frame,
int nb_periods_per_frame);
/// uplink scheduler
void nr_schedule_ulsch(module_id_t module_id,
......@@ -126,7 +130,8 @@ void nr_get_Msg3alloc(module_id_t module_id,
NR_BWP_Uplink_t *ubwp,
sub_frame_t current_subframe,
frame_t current_frame,
NR_RA_t *ra);
NR_RA_t *ra,
int16_t *tdd_beam_association);
/* \brief Function in gNB to fill RAR pdu when requested by PHY.
@param ra Instance of RA resources of gNB
......@@ -264,7 +269,6 @@ NR_SearchSpace_t *get_searchspace(
NR_BWP_Downlink_t *bwp,
NR_SearchSpace__searchSpaceType_PR target_ss);
long get_K2(NR_BWP_Uplink_t *ubwp, int time_domain_assignment, int mu);
void nr_save_pusch_fields(const NR_ServingCellConfigCommon_t *scc,
......
openair2/LAYER2/NR_MAC_gNB/nr_mac_gNB.h
View file @ ddf3f9e8
......@@ -664,11 +664,12 @@ typedef struct gNB_MAC_INST_s {
time_stats_t schedule_pch;
/// CCE lists
int cce_list[MAX_NUM_BWP][MAX_NUM_CORESET][MAX_NUM_CCE];
/// list of allocated beams per period
int16_t *tdd_beam_association;
/// PUCCH: keep track of the resources has already been used by saving the
/// highest index not yet been used in a given slot. Dynamically allocated
/// so we can have it for every slot as a function of the numerology
int *pucch_index_used[MAX_NUM_BWP];
/// DL preprocessor for differentiated scheduling
nr_pp_impl_dl pre_processor_dl;
/// UL preprocessor for differentiated scheduling
......
openair2/LAYER2/nr_rlc/nr_rlc_oai_api.c
View file @ ddf3f9e8
......@@ -250,7 +250,8 @@ mac_rlc_status_resp_t mac_rlc_status_ind(
+ buf_stat.retx_size
+ buf_stat.tx_size;
} else {
LOG_W(RLC, "[%s] Radio Bearer (channel ID %d) is NULL for UE with rntiP %x\n", __FUNCTION__, channel_idP, rntiP);
if (!(frameP%128)) //to supress this warning message
LOG_W(RLC, "[%s] Radio Bearer (channel ID %d) is NULL for UE with rntiP %x\n", __FUNCTION__, channel_idP, rntiP);
ret.bytes_in_buffer = 0;
}
......
openair2/RRC/NR/MESSAGES/asn1_msg.c
View file @ ddf3f9e8
......@@ -561,14 +561,14 @@ uint8_t do_SIB1_NR(rrc_gNB_carrier_data_t *carrier,
case NR_ServingCellConfigCommon__ssb_PositionsInBurst_PR_mediumBitmap:
sib1->servingCellConfigCommon->ssb_PositionsInBurst.inOneGroup = configuration->scc->ssb_PositionsInBurst->choice.mediumBitmap;
break;
/*
groupPresence: This field is present when maximum number of SS/PBCH blocks per half frame equals to 64 as defined in TS 38.213 [13], clause 4.1.
The first/leftmost bit corresponds to the SS/PBCH index 0-7, the second bit corresponds to SS/PBCH block 8-15, and so on.
Value 0 in the bitmap indicates that the SSBs according to inOneGroup are absent. Value 1 indicates that the SS/PBCH blocks are transmitted in accordance with inOneGroup.
inOneGroup: When maximum number of SS/PBCH blocks per half frame equals to 64 as defined in TS 38.213 [13], clause 4.1, all 8 bit are valid;
The first/ leftmost bit corresponds to the first SS/PBCH block index in the group (i.e., to SSB index 0, 8, and so on); the second bit corresponds to the second SS/PBCH block index in the group
(i.e., to SSB index 1, 9, and so on), and so on. Value 0 in the bitmap indicates that the corresponding SS/PBCH block is not transmitted while value 1 indicates that the corresponding SS/PBCH block is transmitted.
*/
/*
groupPresence: This field is present when maximum number of SS/PBCH blocks per half frame equals to 64 as defined in TS 38.213 [13], clause 4.1.
The first/leftmost bit corresponds to the SS/PBCH index 0-7, the second bit corresponds to SS/PBCH block 8-15, and so on.
Value 0 in the bitmap indicates that the SSBs according to inOneGroup are absent. Value 1 indicates that the SS/PBCH blocks are transmitted in accordance with inOneGroup.
inOneGroup: When maximum number of SS/PBCH blocks per half frame equals to 64 as defined in TS 38.213 [13], clause 4.1, all 8 bit are valid;
The first/ leftmost bit corresponds to the first SS/PBCH block index in the group (i.e., to SSB index 0, 8, and so on); the second bit corresponds to the second SS/PBCH block index in the group
(i.e., to SSB index 1, 9, and so on), and so on. Value 0 in the bitmap indicates that the corresponding SS/PBCH block is not transmitted while value 1 indicates that the corresponding SS/PBCH block is transmitted.
*/
case NR_ServingCellConfigCommon__ssb_PositionsInBurst_PR_longBitmap:
sib1->servingCellConfigCommon->ssb_PositionsInBurst.inOneGroup.size = 1;
sib1->servingCellConfigCommon->ssb_PositionsInBurst.inOneGroup.bits_unused = 0;
......
openair2/RRC/NR/rrc_gNB_reconfig.c
View file @ ddf3f9e8
......@@ -242,41 +242,18 @@ void fill_default_secondaryCellGroup(NR_ServingCellConfigCommon_t *servingcellco
secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->resources.present = NR_CFRA__resources_PR_ssb;
secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->resources.choice.ssb = calloc(1,sizeof(struct NR_CFRA__resources__ssb));
secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->resources.choice.ssb->ra_ssb_OccasionMaskIndex = 0;
struct NR_CFRA_SSB_Resource *ssbElem[8];
ssbElem[0] = calloc(1,sizeof(struct NR_CFRA_SSB_Resource));
ssbElem[0]->ssb = 0;
ssbElem[0]->ra_PreambleIndex = 63;
ASN_SEQUENCE_ADD(&secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->resources.choice.ssb->ssb_ResourceList.list,ssbElem[0]);
#if 0
ssbElem[1] = calloc(1,sizeof(struct NR_CFRA_SSB_Resource));
ssbElem[1]->ssb = 1;
ssbElem[1]->ra_PreambleIndex = 62;
ASN_SEQUENCE_ADD(&secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->resources.choice.ssb->ssb_ResourceList.list,ssbElem[1]);
ssbElem[2] = calloc(1,sizeof(struct NR_CFRA_SSB_Resource));
ssbElem[2]->ssb = 2;
ssbElem[2]->ra_PreambleIndex = 63;
ASN_SEQUENCE_ADD(&secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->resources.choice.ssb->ssb_ResourceList.list,ssbElem[2]);
ssbElem[3] = calloc(1,sizeof(struct NR_CFRA_SSB_Resource));
ssbElem[3]->ssb = 3;
ssbElem[3]->ra_PreambleIndex = 63;
ASN_SEQUENCE_ADD(&secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->resources.choice.ssb->ssb_ResourceList.list,ssbElem[3]);
ssbElem[4] = calloc(1,sizeof(struct NR_CFRA_SSB_Resource));
ssbElem[4]->ssb = 4;
ssbElem[4]->ra_PreambleIndex = 63;
ASN_SEQUENCE_ADD(&secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->resources.choice.ssb->ssb_ResourceList.list,ssbElem[4]);
ssbElem[5] = calloc(1,sizeof(struct NR_CFRA_SSB_Resource));
ssbElem[5]->ssb = 5;
ssbElem[5]->ra_PreambleIndex = 63;
ASN_SEQUENCE_ADD(&secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->resources.choice.ssb->ssb_ResourceList.list,ssbElem[5]);
ssbElem[6] = calloc(1,sizeof(struct NR_CFRA_SSB_Resource));
ssbElem[6]->ssb = 6;
ssbElem[6]->ra_PreambleIndex = 63;
ASN_SEQUENCE_ADD(&secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->resources.choice.ssb->ssb_ResourceList.list,ssbElem[6]);
ssbElem[7] = calloc(1,sizeof(struct NR_CFRA_SSB_Resource));
ssbElem[7]->ssb = 7;
ssbElem[7]->ra_PreambleIndex = 63;
ASN_SEQUENCE_ADD(&secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->resources.choice.ssb->ssb_ResourceList.list,ssbElem[7]);
#endif
int n_ssb = 0;
struct NR_CFRA_SSB_Resource *ssbElem[64];
for (int i=0;i<64;i++) {
if ((bitmap>>(63-i))&0x01){
ssbElem[n_ssb] = calloc(1,sizeof(struct NR_CFRA_SSB_Resource));
ssbElem[n_ssb]->ssb = i;
ssbElem[n_ssb]->ra_PreambleIndex = 63;
ASN_SEQUENCE_ADD(&secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->resources.choice.ssb->ssb_ResourceList.list,ssbElem[n_ssb]);
n_ssb++;
}
}
secondaryCellGroup->spCellConfig->reconfigurationWithSync->rach_ConfigDedicated->choice.uplink->cfra->ext1 = NULL;
secondaryCellGroup->spCellConfig->rlf_TimersAndConstants = calloc(1,sizeof(*secondaryCellGroup->spCellConfig->rlf_TimersAndConstants));
secondaryCellGroup->spCellConfig->rlf_TimersAndConstants->present = NR_SetupRelease_RLF_TimersAndConstants_PR_setup;
......@@ -317,7 +294,7 @@ void fill_default_secondaryCellGroup(NR_ServingCellConfigCommon_t *servingcellco
secondaryCellGroup->spCellConfig->spCellConfigDedicated->initialDownlinkBWP->pdsch_Config->choice.setup->tci_StatesToAddModList=calloc(1,sizeof(*secondaryCellGroup->spCellConfig->spCellConfigDedicated->initialDownlinkBWP->pdsch_Config->choice.setup->tci_StatesToAddModList));
int n_ssb = 0;
n_ssb = 0;
NR_TCI_State_t *tcic[64];
for (int i=0;i<64;i++) {
if ((bitmap>>(63-i))&0x01){
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band257.tm1.32PRB.usrpx300.conf
View file @ ddf3f9e8
......@@ -24,6 +24,8 @@ gNBs =
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
servingCellConfigCommon = (
{
......@@ -34,10 +36,10 @@ gNBs =
# downlinkConfigCommon
#frequencyInfoDL
# this is pointA + 23 PRBs@120kHz SCS (same as initial BWP)
absoluteFrequencySSB = 2077907;
absoluteFrequencySSB = 2071241;
dl_frequencyBand = 257;
# this is 27.900 GHz
dl_absoluteFrequencyPointA = 2077499;
dl_absoluteFrequencyPointA = 2070833;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
......@@ -111,8 +113,8 @@ gNBs =
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 7;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#0=oneeighth,1=onefourth,2=half,3=one,4=two,5=four,6=eight,7=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 7;
#ra_ContentionResolutionTimer
......@@ -141,7 +143,7 @@ gNBs =
# this is SS=0 L=12
initialULBWPstartSymbolAndLength_1 = 69;
initialULBWPk2_2 = 14;
initialULBWPk2_2 = 4;
initialULBWPmappingType_2 = 1;
# this is SS=10 L=4
initialULBWPstartSymbolAndLength_2 = 52;
......@@ -158,7 +160,7 @@ gNBs =
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 3;
ssb_PositionsInBurst_Bitmap = 0x100000001L;
ssb_PositionsInBurst_Bitmap = 0x0001000100010001L;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
......@@ -217,6 +219,7 @@ gNBs =
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
......@@ -248,9 +251,9 @@ RUs = (
max_rxgain = 75;
eNB_instances = [0];
sdr_addrs = "addr=192.168.10.2,second_addr=192.168.20.2";
if_freq = 5300000000L;
#time_source = "external";
clock_source = "external";
if_freq = 5124520000L;
clock_src = "external";
time_src = "external";
}
);
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band261.tm1.32PRB.usrpn300.conf
View file @ ddf3f9e8
......@@ -113,8 +113,8 @@ gNBs =
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 7;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#0=oneeighth,1=onefourth,2=half,3=one,4=two,5=four,6=eight,7=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 7;
#ra_ContentionResolutionTimer
......@@ -143,7 +143,7 @@ gNBs =
# this is SS=0 L=12
initialULBWPstartSymbolAndLength_1 = 69;
initialULBWPk2_2 = 14;
initialULBWPk2_2 = 4;
initialULBWPmappingType_2 = 1;
# this is SS=10 L=4
initialULBWPstartSymbolAndLength_2 = 52;
......@@ -250,6 +250,7 @@ L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
pusch_proc_threads = 8;
}
);
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf
View file @ ddf3f9e8
......@@ -159,7 +159,7 @@ gNBs =
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
ssb_PositionsInBurst_Bitmap = 0x1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment