Skip to content

O
OpenXG-RAN
Commit f2f32f53 authored by Cedric Roux's avatar Cedric Roux
Browse files
Options

fix LOG_X macros 

Some of them might not be correctly handled.
I put /* TODO: XXX */ where I didn't know if
the fix was correct.
parent cb67d586
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 257 additions and 227 deletions
openair1/PHY/INIT/lte_init.c
View file @ f2f32f53
......@@ -211,7 +211,7 @@ void phy_config_sib2_eNB(uint8_t Mod_id,
if (mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.present == MBSFN_SubframeConfig__subframeAllocation_PR_oneFrame) {
fp->MBSFN_config[i].fourFrames_flag = 0;
fp->MBSFN_config[i].mbsfn_SubframeConfig = mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.choice.oneFrame.buf[0]; // 6-bit subframe configuration
LOG_I(PHY, "[CONFIG] MBSFN_SubframeConfig[%d] pattern is %ld\n", i,
LOG_I(PHY, "[CONFIG] MBSFN_SubframeConfig[%d] pattern is %d\n", i,
fp->MBSFN_config[i].mbsfn_SubframeConfig);
} else if (mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.present == MBSFN_SubframeConfig__subframeAllocation_PR_fourFrames) { // 24-bit subframe configuration
fp->MBSFN_config[i].fourFrames_flag = 1;
......@@ -220,7 +220,7 @@ void phy_config_sib2_eNB(uint8_t Mod_id,
(mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.choice.oneFrame.buf[1]<<8)|
(mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.choice.oneFrame.buf[2]<<16);
LOG_I(PHY, "[CONFIG] MBSFN_SubframeConfig[%d] pattern is %ld\n", i,
LOG_I(PHY, "[CONFIG] MBSFN_SubframeConfig[%d] pattern is %d\n", i,
fp->MBSFN_config[i].mbsfn_SubframeConfig);
}
}
......@@ -331,7 +331,7 @@ void phy_config_sib2_ue(uint8_t Mod_id,int CC_id,
if (mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.present == MBSFN_SubframeConfig__subframeAllocation_PR_oneFrame) {
fp->MBSFN_config[i].fourFrames_flag = 0;
fp->MBSFN_config[i].mbsfn_SubframeConfig = mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.choice.oneFrame.buf[0]; // 6-bit subframe configuration
LOG_I(PHY, "[CONFIG] MBSFN_SubframeConfig[%d] pattern is %ld\n", i,
LOG_I(PHY, "[CONFIG] MBSFN_SubframeConfig[%d] pattern is %d\n", i,
fp->MBSFN_config[i].mbsfn_SubframeConfig);
} else if (mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.present == MBSFN_SubframeConfig__subframeAllocation_PR_fourFrames) { // 24-bit subframe configuration
fp->MBSFN_config[i].fourFrames_flag = 1;
......@@ -340,7 +340,7 @@ void phy_config_sib2_ue(uint8_t Mod_id,int CC_id,
(mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.choice.oneFrame.buf[1]<<8)|
(mbsfn_SubframeConfigList->list.array[i]->subframeAllocation.choice.oneFrame.buf[2]<<16);
LOG_I(PHY, "[CONFIG] MBSFN_SubframeConfig[%d] pattern is %ld\n", i,
LOG_I(PHY, "[CONFIG] MBSFN_SubframeConfig[%d] pattern is %d\n", i,
fp->MBSFN_config[i].mbsfn_SubframeConfig);
}
}
......@@ -357,7 +357,7 @@ void phy_config_sib13_ue(uint8_t Mod_id,int CC_id,uint8_t eNB_id,int mbsfn_Area_
LTE_DL_FRAME_PARMS *fp = &PHY_vars_UE_g[Mod_id][CC_id]->frame_parms;
LOG_I(PHY,"[UE%d] Applying MBSFN_Area_id %d for index %d\n",Mod_id,mbsfn_AreaId_r9,mbsfn_Area_idx);
LOG_I(PHY,"[UE%d] Applying MBSFN_Area_id %ld for index %d\n",Mod_id,mbsfn_AreaId_r9,mbsfn_Area_idx);
if (mbsfn_Area_idx == 0) {
fp->Nid_cell_mbsfn = (uint16_t)mbsfn_AreaId_r9;
......@@ -376,7 +376,7 @@ void phy_config_sib13_eNB(uint8_t Mod_id,int CC_id,int mbsfn_Area_idx,
LTE_DL_FRAME_PARMS *fp = &PHY_vars_eNB_g[Mod_id][CC_id]->frame_parms;
LOG_I(PHY,"[eNB%d] Applying MBSFN_Area_id %d for index %d\n",Mod_id,mbsfn_AreaId_r9,mbsfn_Area_idx);
LOG_I(PHY,"[eNB%d] Applying MBSFN_Area_id %ld for index %d\n",Mod_id,mbsfn_AreaId_r9,mbsfn_Area_idx);
if (mbsfn_Area_idx == 0) {
fp->Nid_cell_mbsfn = (uint16_t)mbsfn_AreaId_r9;
......@@ -398,7 +398,7 @@ void phy_config_dedicated_eNB_step2(PHY_VARS_eNB *eNB)
physicalConfigDedicated = eNB->physicalConfigDedicated[UE_id];
if (physicalConfigDedicated != NULL) {
LOG_I(PHY,"[eNB %d] Frame %d: Sent physicalConfigDedicated=%p for UE %d\n",eNB->Mod_id,physicalConfigDedicated,UE_id);
LOG_I(PHY,"[eNB %d] Sent physicalConfigDedicated=%p for UE %d\n",eNB->Mod_id,physicalConfigDedicated,UE_id);
LOG_D(PHY,"------------------------------------------------------------------------\n");
if (physicalConfigDedicated->pdsch_ConfigDedicated) {
......@@ -653,7 +653,7 @@ void phy_config_dedicated_eNB(uint8_t Mod_id,
int8_t UE_id = find_ue(rnti,eNB);
if (UE_id == -1) {
LOG_E( PHY, "[eNB %"PRIu8"] find_ue() returns -1\n");
LOG_E( PHY, "[eNB %"PRIu8"] find_ue() returns -1\n", Mod_id);
return;
}
......@@ -725,13 +725,13 @@ void phy_config_dedicated_scell_eNB(uint8_t Mod_id,
if ((dl_CarrierFreq_r10>=36000) && (dl_CarrierFreq_r10<=36199)) {
carrier_freq_local = 1900000000 + (dl_CarrierFreq_r10-36000)*100000; //band 33 from 3GPP 36.101 v 10.9 Table 5.7.3-1
LOG_I(PHY,"[eNB %d] Frame %d: Configured SCell %d to frequency %d (ARFCN %d) for UE %d\n",Mod_id,/*eNB->frame*/0,CC_id,carrier_freq_local,dl_CarrierFreq_r10,UE_id);
LOG_I(PHY,"[eNB %d] Frame %d: Configured SCell %d to frequency %d (ARFCN %ld) for UE %d\n",Mod_id,/*eNB->frame*/0,CC_id,carrier_freq_local,dl_CarrierFreq_r10,UE_id);
} else if ((dl_CarrierFreq_r10>=6150) && (dl_CarrierFreq_r10<=6449)) {
carrier_freq_local = 832000000 + (dl_CarrierFreq_r10-6150)*100000; //band 20 from 3GPP 36.101 v 10.9 Table 5.7.3-1
// this is actually for the UL only, but we use it for DL too, since there is no TDD mode for this band
LOG_I(PHY,"[eNB %d] Frame %d: Configured SCell %d to frequency %d (ARFCN %d) for UE %d\n",Mod_id,/*eNB->frame*/0,CC_id,carrier_freq_local,dl_CarrierFreq_r10,UE_id);
LOG_I(PHY,"[eNB %d] Frame %d: Configured SCell %d to frequency %d (ARFCN %ld) for UE %d\n",Mod_id,/*eNB->frame*/0,CC_id,carrier_freq_local,dl_CarrierFreq_r10,UE_id);
} else {
LOG_E(PHY,"[eNB %d] Frame %d: ARFCN %d of SCell %d for UE %d not supported\n",Mod_id,/*eNB->frame*/0,dl_CarrierFreq_r10,CC_id,UE_id);
LOG_E(PHY,"[eNB %d] Frame %d: ARFCN %ld of SCell %d for UE %d not supported\n",Mod_id,/*eNB->frame*/0,dl_CarrierFreq_r10,CC_id,UE_id);
}
if (physicalConfigDedicatedSCell_r10) {
......
openair1/PHY/LTE_TRANSPORT/dci_tools.c
View file @ f2f32f53
This diff is collapsed.
openair1/PHY/LTE_TRANSPORT/dlsch_demodulation.c
View file @ f2f32f53
......@@ -121,7 +121,7 @@ int rx_pdsch(PHY_VARS_UE *ue,
break;
default:
LOG_E(PHY,"[UE %d][FATAL] Frame %d subframe %d: Unknown PDSCH format %d\n",ue->proc.proc_rxtx[0].frame_rx,subframe,type);
LOG_E(PHY,"[UE][FATAL] Frame %d subframe %d: Unknown PDSCH format %d\n",ue->proc.proc_rxtx[0].frame_rx,subframe,type);
return(-1);
break;
}
......
openair1/PHY/LTE_TRANSPORT/phich.c
View file @ f2f32f53
......@@ -1393,7 +1393,7 @@ void rx_phich(PHY_VARS_UE *ue,
}
} else {
//#ifdef DEBUG_PHICH
LOG_D(PHY,"[UE %d][PUSCH %d] Frame %d subframe %d PHICH, received NAK (%d) nseq %d, ngroup %d\n",
LOG_D(PHY,"[UE %d][PUSCH %d] Frame %d subframe %d PHICH, received NAK (%d) nseq %d, ngroup %d (Mlimit %d)\n",
ue->Mod_id,harq_pid,
proc->frame_rx,
subframe,
......
openair1/PHY/LTE_TRANSPORT/ulsch_coding.c
View file @ f2f32f53
......@@ -190,7 +190,7 @@ LTE_UE_ULSCH_t *new_ue_ulsch(unsigned char N_RB_UL, uint8_t abstraction_flag)
return(ulsch);
}
LOG_E(PHY,"new_ue_ulsch exit flag, size of %d , %d\n",exit_flag, sizeof(LTE_UE_ULSCH_t));
LOG_E(PHY,"new_ue_ulsch exit flag, size of %d , %zu\n",exit_flag, sizeof(LTE_UE_ULSCH_t));
free_ue_ulsch(ulsch);
return(NULL);
......
openair1/SCHED/phy_procedures_lte_eNb.c
View file @ f2f32f53
......@@ -788,7 +788,7 @@ void generate_eNB_dlsch_params(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,DCI_ALLOC
eNB->dlsch[(uint8_t)UE_id][0]->nCCE[subframe] = dci_alloc->firstCCE;
LOG_D(PHY,"[eNB %"PRIu8"] Frame %d subframe %d : CCE resource for ue DCI (PDSCH %"PRIx16") => %"PRIu8"/%u\n",eNB->Mod_id,frame,subframe,
LOG_D(PHY,"[eNB %"PRIu8"] Frame %d subframe %d : CCE resource for ue DCI (PDSCH %"PRIx16") => %"PRIu8"\n",eNB->Mod_id,frame,subframe,
dci_alloc->rnti,eNB->dlsch[(uint8_t)UE_id][0]->nCCE[subframe]);
#if defined(SMBV)
......@@ -900,7 +900,7 @@ void pdsch_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,LTE_eNB_DLSCH_t *d
int i;
LOG_D(PHY,
"[eNB %"PRIu8"][PDSCH %"PRIx16"/%"PRIu8"] Frame %d, subframe %d: Generating PDSCH/DLSCH with input size = %"PRIu16", G %d, nb_rb %"PRIu16", mcs %"PRIu8", pmi_alloc %"PRIx16", rv %"PRIu8" (round %"PRIu8")\n",
"[eNB %"PRIu8"][PDSCH %"PRIx16"/%"PRIu8"] Frame %d, subframe %d: Generating PDSCH/DLSCH with input size = %"PRIu16", G %d, nb_rb %"PRIu16", mcs %"PRIu8", pmi_alloc %"PRIx64", rv %"PRIu8" (round %"PRIu8")\n",
eNB->Mod_id, dlsch->rnti,harq_pid,
frame, subframe, input_buffer_length,
get_G(fp,
......@@ -2784,7 +2784,7 @@ void do_prach(PHY_VARS_eNB *eNB) {
// wake up thread for PRACH RX
if (pthread_mutex_lock(&proc->mutex_prach) != 0) {
LOG_E( PHY, "[eNB] ERROR pthread_mutex_lock for eNB PRACH thread %d (IC %d)\n", proc->instance_cnt_prach );
LOG_E( PHY, "[eNB] ERROR pthread_mutex_lock for eNB PRACH thread %d (IC %d)\n", proc->thread_index, proc->instance_cnt_prach);
exit_fun( "error locking mutex_prach" );
return;
}
......
openair1/SCHED/phy_procedures_lte_ue.c
View file @ f2f32f53
......@@ -346,7 +346,9 @@ void process_timing_advance_rar(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint16_t ti
#ifdef DEBUG_PHY_PROC
LOG_I(PHY,"[UE %d] AbsoluteSubFrame %d.%d, received (rar) timing_advance %d, HW timing advance %d\n",ue->Mod_id,proc->frame_rx, proc->subframe_rx, ue->timing_advance);
/* TODO: fix this log, what is 'HW timing advance'? */
/*LOG_I(PHY,"[UE %d] AbsoluteSubFrame %d.%d, received (rar) timing_advance %d, HW timing advance %d\n",ue->Mod_id,proc->frame_rx, proc->subframe_rx, ue->timing_advance);*/
LOG_I(PHY,"[UE %d] AbsoluteSubFrame %d.%d, received (rar) timing_advance %d\n",ue->Mod_id,proc->frame_rx, proc->subframe_rx, ue->timing_advance);
#endif
}
......@@ -938,7 +940,7 @@ uint16_t get_n1_pucch(PHY_VARS_UE *ue,
} // switch tdd_config
}
LOG_E(PHY,"[UE%d] : Frame %d phy_procedures_lte.c: get_n1pucch, exit without proper return\n",proc->frame_tx);
LOG_E(PHY,"[UE%d] : Frame %d phy_procedures_lte.c: get_n1pucch, exit without proper return\n", ue->Mod_id, proc->frame_tx);
return(-1);
}
......@@ -1154,7 +1156,7 @@ void ue_prach_procedures(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
frame_tx,
eNB_id,
subframe_tx);
LOG_D(PHY,"Got prach_resources for eNB %d address %d, RRCCommon %d\n",eNB_id,ue->prach_resources[eNB_id],UE_mac_inst[ue->Mod_id].radioResourceConfigCommon);
LOG_D(PHY,"Got prach_resources for eNB %d address %p, RRCCommon %p\n",eNB_id,ue->prach_resources[eNB_id],UE_mac_inst[ue->Mod_id].radioResourceConfigCommon);
LOG_D(PHY,"Prach resources %p\n",ue->prach_resources[eNB_id]);
}
}
......@@ -1370,7 +1372,7 @@ void ue_ulsch_uespec_procedures(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB
LOG_D(PHY,"Generating PUSCH (Abssubframe: %d.%d): harq-Id: %d, round: %d, MaxReTrans: %d \n",frame_tx,subframe_tx,harq_pid,ue->ulsch[eNB_id]->harq_processes[harq_pid]->round,ue->ulsch[eNB_id]->Mlimit);
if (ue->ulsch[eNB_id]->harq_processes[harq_pid]->round >= (ue->ulsch[eNB_id]->Mlimit - 1))
{
LOG_D(PHY,"PUSCH MAX Retransmission acheived ==> send last pusch (%d) \n");
LOG_D(PHY,"PUSCH MAX Retransmission achieved ==> send last pusch\n");
ue->ulsch[eNB_id]->harq_processes[harq_pid]->subframe_scheduling_flag = 0;
ue->ulsch[eNB_id]->harq_processes[harq_pid]->round = 0;
}
......@@ -1813,7 +1815,7 @@ void ue_pucch_procedures(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
T_INT(tx_amp),T_INT(ue->dlsch[eNB_id][0]->g_pucch),T_INT(get_PL(ue->Mod_id,ue->CC_id,eNB_id)));
#endif
if (SR_payload>0) {
LOG_D(PHY,"[UE %d][SR %x] Frame %d subframe %d Generating PUCCH %s payload %d,%d (with SR for PUSCH), an_srs_simultanous %d, shorten_pucch %d, n1_pucch %d, Po_PUCCH, amp %d\n",
LOG_D(PHY,"[UE %d][SR %x] Frame %d subframe %d Generating PUCCH %s payload %d,%d (with SR for PUSCH), an_srs_simultanous %d, shorten_pucch %d, n1_pucch %d, Po_PUCCH %d, amp %d\n",
Mod_id,
ue->dlsch[eNB_id][0]->rnti,
frame_tx % 1024, subframe_tx,
......@@ -2571,7 +2573,7 @@ void ue_pbch_procedures(uint8_t eNB_id,PHY_VARS_UE *ue,UE_rxtx_proc_t *proc, uin
} else if (((frame_tx & 0x03FF) != (proc->frame_rx & 0x03FF))) {
//(pbch_tx_ant != ue->frame_parms.nb_antennas_tx)) {
LOG_D(PHY,"[UE %d] frame %d, subframe %d: Re-adjusting frame counter (PBCH ant_tx=%d, frame_rx=%d, frame%1024=%d, phase %d).\n",
LOG_D(PHY,"[UE %d] frame %d, subframe %d: Re-adjusting frame counter (PBCH ant_tx=%d, frame_rx=%d, frame%%1024=%d, phase %d).\n",
ue->Mod_id,
proc->frame_rx,
subframe_rx,
......@@ -3123,7 +3125,8 @@ void ue_pmch_procedures(PHY_VARS_UE *ue, UE_rxtx_proc_t *proc,int eNB_id,int abs
ue->dlsch_mtch_errors[sync_area][0]++;
LOG_D(PHY,"[UE %d] Frame %d, subframe %d: PMCH in error (%d,%d), not passing to L2 (TBS %d, iter %d,G %d)\n",
frame_rx,subframe_rx,
ue->Mod_id,
frame_rx,subframe_rx,
ue->dlsch_mcch_errors[sync_area][0],
ue->dlsch_mtch_errors[sync_area][0],
ue->dlsch_MCH[0]->harq_processes[0]->TBS>>3,
......@@ -3185,7 +3188,7 @@ void ue_pdsch_procedures(PHY_VARS_UE *ue, UE_rxtx_proc_t *proc, int eNB_id, PDSC
if (dlsch0 && (!dlsch1)) {
harq_pid = dlsch0->current_harq_pid;
LOG_D(PHY,"[UE %d] PDSCH active in subframe %d (%d), harq_pid %d\n",ue->Mod_id,subframe_rx,harq_pid);
LOG_D(PHY,"[UE %d] PDSCH active in subframe %d, harq_pid %d\n",ue->Mod_id,subframe_rx,harq_pid);
if ((pdsch==PDSCH) &&
(ue->transmission_mode[eNB_id] == 5) &&
......@@ -3574,7 +3577,7 @@ int phy_procedures_UE_RX(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB_id,uin
#ifdef DEBUG_PHY_PROC
LOG_D(PHY,"[%s %d] Frame %d subframe %d: Doing phy_procedures_UE_RX (%d)\n",
LOG_D(PHY,"[%s %d] Frame %d subframe %d: Doing phy_procedures_UE_RX\n",
(r_type == multicast_relay) ? "RN/UE" : "UE",
ue->Mod_id,frame_rx, subframe_rx);
#endif
......
openair2/ENB_APP/enb_app.c
View file @ f2f32f53
......@@ -410,7 +410,7 @@ void *eNB_app_task(void *args_p)
break;
case TIMER_HAS_EXPIRED:
LOG_I(ENB_APP, " Received %s: timer_id %d\n", msg_name, TIMER_HAS_EXPIRED(msg_p).timer_id);
LOG_I(ENB_APP, " Received %s: timer_id %ld\n", msg_name, TIMER_HAS_EXPIRED(msg_p).timer_id);
if (TIMER_HAS_EXPIRED (msg_p).timer_id == enb_register_retry_timer_id) {
/* Restart the registration process */
......
openair2/LAYER2/MAC/config.c
View file @ f2f32f53
......@@ -183,14 +183,14 @@ rrc_mac_config_req(
logicalChannelConfig->ul_SpecificParameters->bucketSizeDuration; // set the max bucket size
if (logicalChannelConfig->ul_SpecificParameters->logicalChannelGroup != NULL) {
UE_mac_inst[Mod_idP].scheduling_info.LCGID[logicalChannelIdentity]=*logicalChannelConfig->ul_SpecificParameters->logicalChannelGroup;
LOG_D(MAC,"[CONFIG][UE %d] LCID %d is attached to the LCGID %d\n",Mod_idP,logicalChannelIdentity,*logicalChannelConfig->ul_SpecificParameters->logicalChannelGroup);
LOG_D(MAC,"[CONFIG][UE %d] LCID %ld is attached to the LCGID %ld\n",Mod_idP,logicalChannelIdentity,*logicalChannelConfig->ul_SpecificParameters->logicalChannelGroup);
}
else {
UE_mac_inst[Mod_idP].scheduling_info.LCGID[logicalChannelIdentity] = MAX_NUM_LCGID;
}
UE_mac_inst[Mod_idP].scheduling_info.LCID_buffer_remain[logicalChannelIdentity] = 0;
} else {
LOG_E(MAC,"[CONFIG][UE %d] LCID %d NULL ul_SpecificParameters\n",Mod_idP,logicalChannelIdentity);
LOG_E(MAC,"[CONFIG][UE %d] LCID %ld NULL ul_SpecificParameters\n",Mod_idP,logicalChannelIdentity);
mac_xface->macphy_exit("NULL ul_SpecificParameters");
}
}
......
openair2/LAYER2/MAC/eNB_scheduler.c
View file @ f2f32f53
......@@ -253,7 +253,7 @@ void eNB_dlsch_ulsch_scheduler(module_id_t module_idP,uint8_t cooperation_flag,
// check threshold
if (UE_list->UE_sched_ctrl[i].ul_failure_timer > 200) {
// inform RRC of failure and clear timer
LOG_I(MAC,"UE %d rnti %x: UL Failure after repeated PDCCH orders: Triggering RRC \n",i,rnti,UE_list->UE_sched_ctrl[i].ul_failure_timer);
LOG_I(MAC,"UE %d rnti %x: UL Failure after repeated PDCCH orders: Triggering RRC \n",i,rnti);
mac_eNB_rrc_ul_failure(module_idP,CC_id,frameP,subframeP,rnti);
UE_list->UE_sched_ctrl[i].ul_failure_timer=0;
UE_list->UE_sched_ctrl[i].ul_out_of_sync=1;
......
openair2/LAYER2/MAC/eNB_scheduler_dlsch.c
View file @ f2f32f53
......@@ -1651,7 +1651,10 @@ fill_DLSCH_dci(
break;
case 3:
LOG_D(MAC,"[eNB %d] CC_id %d Adding Format 2A UE %d spec DCI for %d PRBS (rb alloc: %x) \n",
/* TODO: fix log, what is 'rb alloc'? */
/*LOG_D(MAC,"[eNB %d] CC_id %d Adding Format 2A UE %d spec DCI for %d PRBS (rb alloc: %x) \n",
module_idP, CC_id, UE_id, nb_rb);*/
LOG_D(MAC,"[eNB %d] CC_id %d Adding Format 2A UE %d spec DCI for %d PRBS\n",
module_idP, CC_id, UE_id, nb_rb);
if (PHY_vars_eNB_g[module_idP][CC_id]->frame_parms.frame_type == TDD) {
......
openair2/LAYER2/MAC/eNB_scheduler_primitives.c
View file @ f2f32f53
......@@ -791,7 +791,8 @@ int get_min_rb_unit(module_id_t module_id, uint8_t CC_id)
default:
min_rb_unit=2;
LOG_W(MAC,"[eNB %d] N_DL_RB %d unknown for CC_id %d, setting min_rb_unit to 2\n", module_id, CC_id);
LOG_W(MAC,"[eNB %d] N_DL_RB %d unknown for CC_id %d, setting min_rb_unit to 2\n",
module_id, frame_parms->N_RB_DL, CC_id);
break;
}
......
openair2/LAYER2/MAC/eNB_scheduler_ulsch.c
View file @ f2f32f53
......@@ -333,7 +333,7 @@ void rx_sdu(const module_id_t enb_mod_idP,
if (UE_id < 0) {
memcpy(&eNB->common_channels[CC_idP].RA_template[ii].cont_res_id[0],payload_ptr,6);
LOG_I(MAC,"[eNB %d][RAPROC] CC_id %d Frame %d CCCH: Received Msg3: length %d, offset %d\n",
LOG_I(MAC,"[eNB %d][RAPROC] CC_id %d Frame %d CCCH: Received Msg3: length %d, offset %ld\n",
enb_mod_idP,CC_idP,frameP,rx_lengths[i],payload_ptr-sduP);
if ((UE_id=add_new_ue(enb_mod_idP,CC_idP,eNB->common_channels[CC_idP].RA_template[ii].rnti,harq_pidP)) == -1 ) {
......@@ -343,7 +343,7 @@ void rx_sdu(const module_id_t enb_mod_idP,
LOG_I(MAC,"[eNB %d][RAPROC] CC_id %d Frame %d Added user with rnti %x => UE %d\n",
enb_mod_idP,CC_idP,frameP,eNB->common_channels[CC_idP].RA_template[ii].rnti,UE_id);
} else {
LOG_I(MAC,"[eNB %d][RAPROC] CC_id %d Frame %d CCCH: Received Msg3 from already registered UE %d: length %d, offset %d\n",
LOG_I(MAC,"[eNB %d][RAPROC] CC_id %d Frame %d CCCH: Received Msg3 from already registered UE %d: length %d, offset %ld\n",
enb_mod_idP,CC_idP,frameP,UE_id,rx_lengths[i],payload_ptr-sduP);
// kill RA procedure
}
......@@ -433,7 +433,7 @@ void rx_sdu(const module_id_t enb_mod_idP,
if (UE_id != -1) {
// adjust buffer occupancy of the correponding logical channel group
LOG_D(MAC,"[eNB %d] CC_id %d Frame %d : ULSCH -> UL-DTCH, received %d bytes from UE %d for lcid %d, removing from LCGID %d, %d\n",
LOG_D(MAC,"[eNB %d] CC_id %d Frame %d : ULSCH -> UL-DTCH, received %d bytes from UE %d for lcid %d, removing from LCGID %ld, %d\n",
enb_mod_idP,CC_idP,frameP, rx_lengths[i], UE_id,rx_lcids[i],
UE_list->UE_template[CC_idP][UE_id].lcgidmap[rx_lcids[i]],
UE_list->UE_template[CC_idP][UE_id].ul_buffer_info[UE_list->UE_template[CC_idP][UE_id].lcgidmap[rx_lcids[i]]]);
......@@ -568,7 +568,7 @@ unsigned char *parse_ulsch_header(unsigned char *mac_header,
}
}
LOG_D(MAC,"[eNB] sdu %d lcid %d tb_length %d length %d (offset now %d)\n",
LOG_D(MAC,"[eNB] sdu %d lcid %d tb_length %d length %d (offset now %ld)\n",
num_sdus,lcid,tb_length, length,mac_header_ptr-mac_header);
rx_lcids[num_sdus] = lcid;
rx_lengths[num_sdus] = length;
......
openair2/LAYER2/MAC/main.c
View file @ f2f32f53
......@@ -127,11 +127,11 @@ int mac_top_init(int eMBMS_active, char *uecap_xer, uint8_t cba_group_active, ui
UE_mac_inst = (UE_MAC_INST*)malloc16(NB_UE_INST*sizeof(UE_MAC_INST));
if (UE_mac_inst == NULL) {
LOG_C(MAC,"[MAIN] Can't ALLOCATE %d Bytes for %d UE_MAC_INST with size %d \n",NB_UE_INST*sizeof(UE_MAC_INST),NB_UE_INST,sizeof(UE_MAC_INST));
LOG_C(MAC,"[MAIN] Can't ALLOCATE %zu Bytes for %d UE_MAC_INST with size %zu \n",NB_UE_INST*sizeof(UE_MAC_INST),NB_UE_INST,sizeof(UE_MAC_INST));
mac_xface->macphy_exit("[MAC][MAIN] not enough memory for UEs \n");
}
LOG_D(MAC,"[MAIN] ALLOCATE %d Bytes for %d UE_MAC_INST @ %p\n",NB_UE_INST*sizeof(UE_MAC_INST),NB_UE_INST,UE_mac_inst);
LOG_D(MAC,"[MAIN] ALLOCATE %zu Bytes for %d UE_MAC_INST @ %p\n",NB_UE_INST*sizeof(UE_MAC_INST),NB_UE_INST,UE_mac_inst);
bzero(UE_mac_inst,NB_UE_INST*sizeof(UE_MAC_INST));
......@@ -148,10 +148,10 @@ int mac_top_init(int eMBMS_active, char *uecap_xer, uint8_t cba_group_active, ui
eNB_mac_inst = (eNB_MAC_INST*)malloc16(NB_eNB_INST*sizeof(eNB_MAC_INST));
if (eNB_mac_inst == NULL) {
LOG_D(MAC,"[MAIN] can't ALLOCATE %d Bytes for %d eNB_MAC_INST with size %d \n",NB_eNB_INST*sizeof(eNB_MAC_INST*),NB_eNB_INST,sizeof(eNB_MAC_INST));
LOG_D(MAC,"[MAIN] can't ALLOCATE %zu Bytes for %d eNB_MAC_INST with size %zu \n",NB_eNB_INST*sizeof(eNB_MAC_INST*),NB_eNB_INST,sizeof(eNB_MAC_INST));
mac_xface->macphy_exit("[MAC][MAIN] not enough memory for eNB \n");
} else {
LOG_D(MAC,"[MAIN] ALLOCATE %d Bytes for %d eNB_MAC_INST @ %p\n",sizeof(eNB_MAC_INST),NB_eNB_INST,eNB_mac_inst);
LOG_D(MAC,"[MAIN] ALLOCATE %zu Bytes for %d eNB_MAC_INST @ %p\n",sizeof(eNB_MAC_INST),NB_eNB_INST,eNB_mac_inst);
bzero(eNB_mac_inst,NB_eNB_INST*sizeof(eNB_MAC_INST));
}
} else {
......
openair2/LAYER2/MAC/ue_procedures.c
View file @ f2f32f53
......@@ -189,7 +189,7 @@ unsigned char *parse_header(unsigned char *mac_header,
}
#ifdef DEBUG_HEADER_PARSING
LOG_D(MAC,"[UE] sdu %d lcid %d length %d (offset now %d)\n",
LOG_D(MAC,"[UE] sdu %d lcid %d length %d (offset now %ld)\n",
num_sdus,lcid,length,mac_header_ptr-mac_header);
#endif
rx_lcids[num_sdus] = lcid;
......@@ -229,7 +229,7 @@ unsigned char *parse_header(unsigned char *mac_header,
}
#ifdef DEBUG_HEADER_PARSING
LOG_D(MAC,"[UE] ce %d lcid %d (offset now %d)\n",num_ces,lcid,mac_header_ptr-mac_header);
LOG_D(MAC,"[UE] ce %d lcid %d (offset now %ld)\n",num_ces,lcid,mac_header_ptr-mac_header);
#endif
}
}
......@@ -366,7 +366,7 @@ ue_send_sdu(
#endif
#if defined(ENABLE_MAC_PAYLOAD_DEBUG)
LOG_T(MAC,"[eNB %d] First 32 bytes of DLSCH : \n");
LOG_T(MAC,"[UE %d] First 32 bytes of DLSCH : \n", module_idP);
for (i=0; i<32; i++) {
LOG_T(MAC,"%x.",sdu[i]);
......@@ -386,7 +386,7 @@ ue_send_sdu(
module_idP,frameP,payload_ptr[0],payload_ptr[1],payload_ptr[2],payload_ptr[3],payload_ptr[4],payload_ptr[5]);
if (UE_mac_inst[module_idP].RA_active == 1) {
LOG_I(MAC,"[UE %d][RAPROC] Frame %d : Clearing RA_active flag\n");
LOG_I(MAC,"[UE %d][RAPROC] Frame %d : Clearing RA_active flag\n", module_idP, frameP);
UE_mac_inst[module_idP].RA_active=0;
// check if RA procedure has finished completely (no contention)
tx_sdu = &UE_mac_inst[module_idP].CCCH_pdu.payload[3];
......@@ -402,7 +402,7 @@ ue_send_sdu(
return;
}
LOG_I(MAC,"[UE %d][RAPROC] Frame %d : Clearing contention resolution timer\n");
LOG_I(MAC,"[UE %d][RAPROC] Frame %d : Clearing contention resolution timer\n", module_idP, frameP);
UE_mac_inst[module_idP].RA_contention_resolution_timer_active = 0;
mac_xface->ra_succeeded(module_idP,CC_id,eNB_index);
}
......@@ -742,7 +742,7 @@ int ue_query_mch(module_id_t module_idP, uint8_t CC_id, uint32_t frameP, uint32_
mcch_period = 32<<(UE_mac_inst[module_idP].mbsfn_AreaInfo[0]->mcch_Config_r9.mcch_RepetitionPeriod_r9);
LOG_D(MAC,
"[UE %d] Frame %d subframe %d: Checking MBSFN Sync Area %d/%d with SF allocation %d/%d for MCCH and MTCH (mbsfn period %d, mcch period %d,mac sched period (%d,%d))\n",
"[UE %d] Frame %d subframe %d: Checking MBSFN Sync Area %d/%d with SF allocation %d/%d for MCCH and MTCH (mbsfn period %d, mcch period %d,mac sched period (%d,%ld))\n",
module_idP,frameP, subframe,i,UE_mac_inst[module_idP].num_active_mbsfn_area,
j,UE_mac_inst[module_idP].num_sf_allocation_pattern,mbsfn_period,mcch_period,
mch_scheduling_period,UE_mac_inst[module_idP].mbsfn_SubframeConfig[j]->radioframeAllocationOffset);
......@@ -1054,7 +1054,7 @@ unsigned char generate_ulsch_header(uint8_t *mac_header,
last_size=1;
*((POWER_HEADROOM_CMD *)ce_ptr)=(*power_headroom);
ce_ptr+=sizeof(POWER_HEADROOM_CMD);
LOG_D(MAC, "phr header size %d\n",sizeof(POWER_HEADROOM_CMD));
LOG_D(MAC, "phr header size %zu\n",sizeof(POWER_HEADROOM_CMD));
}
if (crnti) {
......@@ -1250,7 +1250,7 @@ unsigned char generate_ulsch_header(uint8_t *mac_header,
}
#ifdef DEBUG_HEADER_PARSING
LOG_T(MAC," [UE %d] header : ", crnti);
LOG_T(MAC," [UE] header : ");
for (i=0; i<((unsigned char*)mac_header_ptr - mac_header); i++) {
LOG_T(MAC,"%2x.",mac_header[i]);
......@@ -1887,8 +1887,7 @@ if (UE_mac_inst[module_idP].scheduling_info.LCID_status[lcid] == LCID_NOT_EMPTY)
ulsch_buffer[payload_offset+sdu_length_total+j] = (char)(taus()&0xff);
}
}
LOG_D(MAC,"[UE %d][SR] Gave SDU to PHY, clearing any scheduling request\n",
module_idP,payload_offset, sdu_length_total);
LOG_D(MAC,"[UE %d][SR] Gave SDU to PHY, clearing any scheduling request\n", module_idP);
UE_mac_inst[module_idP].scheduling_info.SR_pending=0;
UE_mac_inst[module_idP].scheduling_info.SR_COUNTER=0;
......@@ -1901,7 +1900,7 @@ if (UE_mac_inst[module_idP].scheduling_info.LCID_status[lcid] == LCID_NOT_EMPTY)
// Reset ReTx BSR Timer
UE_mac_inst[module_idP].scheduling_info.retxBSR_SF = get_sf_retxBSRTimer(UE_mac_inst[module_idP].scheduling_info.retxBSR_Timer);
LOG_D(MAC,"[UE %d] MAC ReTx BSR Timer Reset =%d\n",
LOG_D(MAC,"[UE %d] MAC ReTx BSR Timer Reset =%d\n", module_idP,
UE_mac_inst[module_idP].scheduling_info.retxBSR_SF);
// Reset Periodic Timer except when BSR is truncated
......@@ -1910,7 +1909,7 @@ if (UE_mac_inst[module_idP].scheduling_info.LCID_status[lcid] == LCID_NOT_EMPTY)
UE_mac_inst[module_idP].scheduling_info.periodicBSR_SF = get_sf_periodicBSRTimer(UE_mac_inst[module_idP].scheduling_info.periodicBSR_Timer);
LOG_D(MAC,"[UE %d] MAC Periodic BSR Timer Reset =%d\n",
UE_mac_inst[module_idP].scheduling_info.periodicBSR_SF);
module_idP, UE_mac_inst[module_idP].scheduling_info.periodicBSR_SF);
}
......@@ -1923,7 +1922,7 @@ if (UE_mac_inst[module_idP].scheduling_info.LCID_status[lcid] == LCID_NOT_EMPTY)
if (opt_enabled) {
trace_pdu(0, ulsch_buffer, buflen, module_idP, 3, UE_mac_inst[module_idP].crnti, UE_mac_inst[module_idP].txFrame, UE_mac_inst[module_idP].txSubframe, 0, 0);
LOG_D(OPT,"[UE %d][ULSCH] Frame %d trace pdu for rnti %x with size %d\n",
LOG_D(OPT,"[UE %d][ULSCH] Frame %d subframe %d trace pdu for rnti %x with size %d\n",
module_idP, UE_mac_inst[module_idP].txFrame, UE_mac_inst[module_idP].txSubframe, UE_mac_inst[module_idP].crnti, buflen);
}
}
......@@ -2065,7 +2064,7 @@ ue_scheduler(
//return(RRC_OK);
}
LOG_I(MAC,"Frame %d: Contention resolution timer %d/%d\n",txFrameP,UE_mac_inst[module_idP].RA_contention_resolution_cnt,
LOG_I(MAC,"Frame %d: Contention resolution timer %d/%ld\n",txFrameP,UE_mac_inst[module_idP].RA_contention_resolution_cnt,
((1+rach_ConfigCommon->ra_SupervisionInfo.mac_ContentionResolutionTimer)<<3));
UE_mac_inst[module_idP].RA_contention_resolution_cnt++;
......
openair2/LAYER2/PDCP_v10.1.0/pdcp.c
View file @ f2f32f53
......@@ -257,7 +257,7 @@ boolean_t pdcp_data_req(
* Validate incoming sequence number, there might be a problem with PDCP initialization
*/
if (current_sn > pdcp_calculate_max_seq_num_for_given_size(pdcp_p->seq_num_size)) {
LOG_E(PDCP, PROTOCOL_PDCP_CTXT_FMT" Generated sequence number (%lu) is greater than a sequence number could ever be!\n"\
LOG_E(PDCP, PROTOCOL_PDCP_CTXT_FMT" Generated sequence number (%"PRIu16") is greater than a sequence number could ever be!\n"\
"There must be a problem with PDCP initialization, ignoring this PDU...\n",
PROTOCOL_PDCP_CTXT_ARGS(ctxt_pP,pdcp_p),
current_sn);
......@@ -836,7 +836,7 @@ pdcp_data_ind(
/* Print octets of incoming data in hexadecimal form */
LOG_D(PDCP, "Following content has been received from RLC (%d,%d)(PDCP header has already been removed):\n",
sdu_buffer_sizeP - payload_offset + sizeof(pdcp_data_ind_header_t),
sdu_buffer_sizeP - payload_offset + (int)sizeof(pdcp_data_ind_header_t),
sdu_buffer_sizeP - payload_offset);
//util_print_hex_octets(PDCP, &new_sdu_p->data[sizeof (pdcp_data_ind_header_t)], sdu_buffer_sizeP - payload_offset);
//util_flush_hex_octets(PDCP, &new_sdu_p->data[sizeof (pdcp_data_ind_header_t)], sdu_buffer_sizeP - payload_offset);
......@@ -1214,7 +1214,7 @@ rrc_pdcp_config_asn1_req (
}
if (lc_id == 1 || lc_id == 2) {
LOG_E(RLC, PROTOCOL_CTXT_FMT" logicalChannelIdentity = %d is invalid in RRC message when adding DRB!\n", PROTOCOL_CTXT_ARGS(ctxt_pP), lc_id);
LOG_E(RLC, PROTOCOL_CTXT_FMT" logicalChannelIdentity = %ld is invalid in RRC message when adding DRB!\n", PROTOCOL_CTXT_ARGS(ctxt_pP), lc_id);
continue;
}
......@@ -1312,7 +1312,7 @@ rrc_pdcp_config_asn1_req (
break;
default:
LOG_W(PDCP,"[MOD_id %u/%u][RB %u] unknown drb_toaddmod->PDCP_Config->headerCompression->present \n",
LOG_W(PDCP,PROTOCOL_PDCP_CTXT_FMT"[RB %ld] unknown drb_toaddmod->PDCP_Config->headerCompression->present \n",
PROTOCOL_PDCP_CTXT_ARGS(ctxt_pP,pdcp_p), drb_id);
break;
}
......@@ -1345,7 +1345,7 @@ rrc_pdcp_config_asn1_req (
h_rc = hashtable_get(pdcp_coll_p, key, (void**)&pdcp_p);
if (h_rc != HASH_TABLE_OK) {
LOG_E(PDCP, PROTOCOL_CTXT_FMT" PDCP REMOVE FAILED drb_id %u\n",
LOG_E(PDCP, PROTOCOL_CTXT_FMT" PDCP REMOVE FAILED drb_id %ld\n",
PROTOCOL_CTXT_ARGS(ctxt_pP),
drb_id);
continue;
......@@ -1749,7 +1749,7 @@ rrc_pdcp_config_req (
pdcp_p->cipheringAlgorithm,
pdcp_p->integrityProtAlgorithm );
} else {
LOG_W(PDCP,"[%s %d] bad security mode %d", security_modeP);
LOG_W(PDCP,PROTOCOL_PDCP_CTXT_FMT" bad security mode %d", PROTOCOL_PDCP_CTXT_ARGS(ctxt_pP,pdcp_p), security_modeP);
}
break;
......
openair2/LAYER2/PDCP_v10.1.0/pdcp_util.c
View file @ f2f32f53
......@@ -62,7 +62,7 @@ void util_print_hex_octets(comp_name_t component, unsigned char* data, unsigned
*/
if (octet_index != 0 && (octet_index + 1) % 16 == 0) {
LOG_T(component, " |\n");
LOG_T(component, " %03d |", octet_index);
LOG_T(component, " %03lu |", octet_index);
}
}
......
openair2/LAYER2/RLC/AM_v9.3.0/rlc_am.c
View file @ f2f32f53
......@@ -223,7 +223,7 @@ void config_req_rlc_am_asn1 (
PROTOCOL_RLC_AM_MSC_ARGS(ctxt_pP, l_rlc_p));
LOG_D(RLC,
PROTOCOL_RLC_AM_CTXT_FMT"ILLEGAL CONFIG_REQ (max_retx_threshold=%d poll_pdu=%d poll_byte=%d t_poll_retransmit=%d t_reord=%d t_status_prohibit=%d), RLC-AM NOT CONFIGURED\n",
PROTOCOL_RLC_AM_CTXT_FMT"ILLEGAL CONFIG_REQ (max_retx_threshold=%ld poll_pdu=%ld poll_byte=%ld t_poll_retransmit=%ld t_reord=%ld t_status_prohibit=%ld), RLC-AM NOT CONFIGURED\n",
PROTOCOL_RLC_AM_CTXT_ARGS(ctxt_pP,l_rlc_p),
config_am_pP->ul_AM_RLC.maxRetxThreshold,
config_am_pP->ul_AM_RLC.pollPDU,
......@@ -523,7 +523,7 @@ rlc_am_rx (
switch (rlc->protocol_state) {
case RLC_NULL_STATE:
LOG_N(RLC, PROTOCOL_RLC_AM_CTXT_FMT" ERROR MAC_DATA_IND IN RLC_NULL_STATE\n", arg_pP);
LOG_N(RLC, PROTOCOL_RLC_AM_CTXT_FMT" ERROR MAC_DATA_IND IN RLC_NULL_STATE\n", PROTOCOL_RLC_AM_CTXT_ARGS(ctxt_pP, rlc));
list_free (&data_indP.data);
break;
......@@ -532,7 +532,7 @@ rlc_am_rx (
break;
default:
LOG_E(RLC, PROTOCOL_RLC_AM_CTXT_FMT" TX UNKNOWN PROTOCOL STATE 0x%02X\n", rlc, rlc->protocol_state);
LOG_E(RLC, PROTOCOL_RLC_AM_CTXT_FMT" TX UNKNOWN PROTOCOL STATE 0x%02X\n", PROTOCOL_RLC_AM_CTXT_ARGS(ctxt_pP, rlc), rlc->protocol_state);
}
}
......
openair2/LAYER2/RLC/AM_v9.3.0/rlc_am_init.c
View file @ f2f32f53
......@@ -54,11 +54,11 @@ rlc_am_init(
// rlc_pP->pdu_retrans_buffer = calloc(1, (uint16_t)((unsigned int)RLC_AM_PDU_RETRANSMISSION_BUFFER_SIZE*(unsigned int)sizeof(rlc_am_tx_data_pdu_management_t)));
rlc_pP->pdu_retrans_buffer = calloc(1, (uint32_t)((unsigned int)RLC_AM_PDU_RETRANSMISSION_BUFFER_SIZE*(unsigned int)sizeof(
rlc_am_tx_data_pdu_management_t)));
LOG_D(RLC, PROTOCOL_RLC_AM_CTXT_FMT"[AM INIT] input_sdus[] = %p element size=%d\n",
LOG_D(RLC, PROTOCOL_RLC_AM_CTXT_FMT"[AM INIT] input_sdus[] = %p element size=%zu\n",
PROTOCOL_RLC_AM_CTXT_ARGS(ctxt_pP,rlc_pP),
rlc_pP->input_sdus,
sizeof(rlc_am_tx_sdu_management_t));
LOG_D(RLC, PROTOCOL_RLC_AM_CTXT_FMT"[AM INIT] pdu_retrans_buffer[] = %p element size=%d\n",
LOG_D(RLC, PROTOCOL_RLC_AM_CTXT_FMT"[AM INIT] pdu_retrans_buffer[] = %p element size=%zu\n",
PROTOCOL_RLC_AM_CTXT_ARGS(ctxt_pP,rlc_pP),
rlc_pP->pdu_retrans_buffer,
sizeof(rlc_am_tx_data_pdu_management_t));
......
openair2/LAYER2/RLC/AM_v9.3.0/rlc_am_retransmit.c
View file @ f2f32f53
......@@ -646,7 +646,7 @@ mem_block_t* rlc_am_retransmit_get_subsegment(
// fill the segment pdu_p with Lis and data
//---------------------------------------------------------------
LOG_T(RLC, PROTOCOL_RLC_AM_CTXT_FMT"[RE-SEGMENT] fill the segment pdu_p with Lis and data, test_num_li %d\n",
test_num_li);
PROTOCOL_RLC_AM_CTXT_ARGS(ctxt_pP,rlc_pP), test_num_li);
if (test_num_li > 0) {
pdu_sub_segment_p->b1 = pdu_sub_segment_p->b1 | 0x04; // set E bit
......@@ -678,12 +678,12 @@ mem_block_t* rlc_am_retransmit_get_subsegment(
*sizeP = *sizeP - 1;
}
LOG_T(RLC, PROTOCOL_RLC_AM_CTXT_FMT"[RB %u][RE-SEGMENT] ADD LI %d\n",
LOG_T(RLC, PROTOCOL_RLC_AM_CTXT_FMT"[RE-SEGMENT] ADD LI %d\n",
PROTOCOL_RLC_AM_CTXT_ARGS(ctxt_pP,rlc_pP),
test_li_list[fill_num_li]);
}
} else {
LOG_T(RLC, PROTOCOL_RLC_AM_CTXT_FMT"[RB %u][RE-SEGMENT] ADD NO LI\n",
LOG_T(RLC, PROTOCOL_RLC_AM_CTXT_FMT"[RE-SEGMENT] ADD NO LI\n",
PROTOCOL_RLC_AM_CTXT_ARGS(ctxt_pP,rlc_pP));
fill_payload_p = (uint8_t*)e_li_sub_segment;
}
......
openair2/LAYER2/RLC/AM_v9.3.0/rlc_am_rx_list.c
View file @ f2f32f53
......@@ -62,7 +62,6 @@ rlc_am_rx_list_insert_pdu(
if (pdu_info_previous_cursor_p->sn == pdu_info_p->sn) {
if (pdu_info_p->rf != pdu_info_previous_cursor_p->rf) {
LOG_N(RLC, PROTOCOL_RLC_AM_CTXT_FMT"[INSERT PDU] LINE %d RX PDU SN %04d WRONG RF -> DROPPED (vr(mr) < vr(r) and sn >= vr(r))\n",
ctxt_pP->frame,
PROTOCOL_RLC_AM_CTXT_ARGS(ctxt_pP,rlc_pP),
__LINE__,
pdu_info_p->sn);
......
openair2/LAYER2/RLC/UM_v9.3.0/rlc_um_control_primitives.c
View file @ f2f32f53
......@@ -150,7 +150,7 @@ void config_req_rlc_um_asn1 (
break;
default:
LOG_E(RLC,PROTOCOL_RLC_UM_CTXT_FMT" [CONFIGURE] RB %u INVALID UL sn_FieldLength %d, RLC NOT CONFIGURED\n",
LOG_E(RLC,PROTOCOL_RLC_UM_CTXT_FMT" [CONFIGURE] RB %u INVALID UL sn_FieldLength %ld, RLC NOT CONFIGURED\n",
PROTOCOL_RLC_UM_CTXT_ARGS(ctxt_pP,rlc_p),
rlc_p->rb_id,
ul_rlc_pP->sn_FieldLength);
......@@ -178,7 +178,7 @@ void config_req_rlc_um_asn1 (
break;
default:
LOG_E(RLC,PROTOCOL_RLC_UM_CTXT_FMT" [CONFIGURE] RB %u INVALID DL sn_FieldLength %d, RLC NOT CONFIGURED\n",
LOG_E(RLC,PROTOCOL_RLC_UM_CTXT_FMT" [CONFIGURE] RB %u INVALID DL sn_FieldLength %ld, RLC NOT CONFIGURED\n",
PROTOCOL_RLC_UM_CTXT_ARGS(ctxt_pP,rlc_p),
rlc_p->rb_id,
dl_rlc_pP->sn_FieldLength);
......@@ -197,7 +197,7 @@ void config_req_rlc_um_asn1 (
if (dl_rlc_pP->t_Reordering<T_Reordering_spare1) {
t_Reordering = t_Reordering_tab[dl_rlc_pP->t_Reordering];
} else {
LOG_E(RLC,PROTOCOL_RLC_UM_CTXT_FMT" [CONFIGURE] RB %u INVALID T_Reordering %d, RLC NOT CONFIGURED\n",
LOG_E(RLC,PROTOCOL_RLC_UM_CTXT_FMT" [CONFIGURE] RB %u INVALID T_Reordering %ld, RLC NOT CONFIGURED\n",
PROTOCOL_RLC_UM_CTXT_ARGS(ctxt_pP,rlc_p),
rlc_p->rb_id,
dl_rlc_pP->t_Reordering);
......
openair2/LAYER2/RLC/UM_v9.3.0/rlc_um_dar.c
View file @ f2f32f53
......@@ -579,7 +579,7 @@ rlc_um_try_reassembly(
rlc_pP->stat_rx_data_bytes_dropped += tb_ind_p->size;
rlc_pP->reassembly_missing_sn_detected = 1;
LOG_W(RLC, "[SN %d] Bad RLC header! Discard this RLC PDU\n", sn, size);
LOG_W(RLC, "[SN %d] Bad RLC header! Discard this RLC PDU (size=%d)\n", sn, size);
}
}
......@@ -664,7 +664,7 @@ rlc_um_start_timer_reordering(
rlc_pP->t_reordering.ms_time_out);
#endif
} else {
LOG_T(RLC, PROTOCOL_RLC_AM_CTXT_FMT"[T-REORDERING] NOT STARTED, CAUSE CONFIGURED 0 ms\n",
LOG_T(RLC, PROTOCOL_RLC_UM_CTXT_FMT"[T-REORDERING] NOT STARTED, CAUSE CONFIGURED 0 ms\n",
PROTOCOL_RLC_UM_CTXT_ARGS(ctxt_pP,rlc_pP));
}
}
......
openair2/LAYER2/RLC/UM_v9.3.0/rlc_um_receiver.c
View file @ f2f32f53
......@@ -83,7 +83,7 @@ rlc_um_display_rx_window(
LOG_T(RLC, "\n");
}
LOG_T(RLC, "%s%s| %04d |", RLC_FG_COLOR_DEFAULT, RLC_NORMAL_VIDEO, sn);
LOG_T(RLC, "%s%s| %04lu |", RLC_FG_COLOR_DEFAULT, RLC_NORMAL_VIDEO, sn);
}
strcpy(color, RLC_FG_COLOR_DEFAULT);
......
openair2/LAYER2/RLC/rlc.c
View file @ f2f32f53
......@@ -71,7 +71,7 @@ void rlc_util_print_hex_octets(comp_name_t componentP, unsigned char* dataP, con
LOG_T(componentP, " |\n");
}
LOG_T(componentP, " %04d |", octet_index);
LOG_T(componentP, " %04lu |", octet_index);
}
/*
......
openair2/LAYER2/RLC/rlc_rrc.c
View file @ f2f32f53
......@@ -99,7 +99,7 @@ rlc_op_status_t rrc_rlc_config_asn1_req (const protocol_ctxt_t * const ctxt_pP
rb_id = srb2add_listP->list.array[cnt]->srb_Identity;
lc_id = rb_id;
LOG_D(RLC, "Adding SRB %d, rb_id %d\n",srb2add_listP->list.array[cnt]->srb_Identity,rb_id);
LOG_D(RLC, "Adding SRB %ld, rb_id %d\n",srb2add_listP->list.array[cnt]->srb_Identity,rb_id);
srb_toaddmod_p = srb2add_listP->list.array[cnt];
if (srb_toaddmod_p->rlc_Config) {
......@@ -259,7 +259,7 @@ rlc_op_status_t rrc_rlc_config_asn1_req (const protocol_ctxt_t * const ctxt_pP
continue;
}
LOG_D(RLC, "Adding DRB %d, lc_id %d\n",drb_id,lc_id);
LOG_D(RLC, "Adding DRB %ld, lc_id %d\n",drb_id,lc_id);
if (drb_toaddmod_p->rlc_Config) {
......@@ -325,7 +325,7 @@ rlc_op_status_t rrc_rlc_config_asn1_req (const protocol_ctxt_t * const ctxt_pP
break;
default:
LOG_W(RLC, PROTOCOL_CTXT_FMT"[RB %u] unknown drb_toaddmod_p->rlc_Config->present \n",
LOG_W(RLC, PROTOCOL_CTXT_FMT"[RB %ld] unknown drb_toaddmod_p->rlc_Config->present \n",
PROTOCOL_CTXT_ARGS(ctxt_pP),
drb_id);
}
......
openair2/RRC/LITE/rrc_UE.c
View file @ f2f32f53
This diff is collapsed.
openair2/RRC/LITE/rrc_common.c
View file @ f2f32f53
......@@ -484,7 +484,8 @@ rrc_rx_tx(
if (UE_rrc_inst[ctxt_pP->module_id].Info[enb_indexP].T304_cnt == 0) {
UE_rrc_inst[ctxt_pP->module_id].Info[enb_indexP].T304_active = 0;
UE_rrc_inst[ctxt_pP->module_id].HandoverInfoUe.measFlag = 1;
LOG_E(RRC,"[UE %d] Handover failure..initiating connection re-establishment procedure... \n");
LOG_E(RRC,"[UE %d] Handover failure..initiating connection re-establishment procedure... \n",
ctxt_pP->module_id);
//Implement 36.331, section 5.3.5.6 here
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_RRC_RX_TX,VCD_FUNCTION_OUT);
return(RRC_Handover_failed);
......
openair2/RRC/LITE/rrc_eNB.c
View file @ f2f32f53
This diff is collapsed.
openair2/RRC/LITE/rrc_eNB_S1AP.c
View file @ f2f32f53
......@@ -115,7 +115,7 @@ rrc_eNB_S1AP_get_ue_ids(
(hash_key_t)eNB_ue_s1ap_id,
result2);
if (h_rc != HASH_TABLE_OK) {
LOG_E(S1AP, "[eNB %u] Error while hashtable_insert in s1ap_id2_s1ap_ids eNB_ue_s1ap_id %u\n",
LOG_E(S1AP, "[eNB %ld] Error while hashtable_insert in s1ap_id2_s1ap_ids eNB_ue_s1ap_id %"PRIu32"\n",
rrc_instance_pP - eNB_rrc_inst, eNB_ue_s1ap_id);
}
}
......@@ -308,7 +308,7 @@ rrc_eNB_process_security(
changed = TRUE;
}
LOG_I (RRC, "[eNB %d][UE %x] Selected security algorithms (%x): %x, %x, %s\n",
LOG_I (RRC, "[eNB %d][UE %x] Selected security algorithms (%p): %x, %x, %s\n",
ctxt_pP->module_id,
ue_context_pP->ue_context.rnti,
security_capabilities_pP,
......@@ -1008,7 +1008,7 @@ int rrc_eNB_process_S1AP_UE_CTXT_MODIFICATION_REQ(MessageDef *msg_p, const char
/* Can not associate this message to an UE index, send a failure to S1AP and discard it! */
MessageDef *msg_fail_p;
LOG_W(RRC, "[eNB %d] In S1AP_UE_CTXT_MODIFICATION_REQ: unknown UE from eNB_ue_s1ap_id (%d) for eNB %d\n", instance, eNB_ue_s1ap_id);
LOG_W(RRC, "[eNB %d] In S1AP_UE_CTXT_MODIFICATION_REQ: unknown UE from eNB_ue_s1ap_id (%d)\n", instance, eNB_ue_s1ap_id);
msg_fail_p = itti_alloc_new_message (TASK_RRC_ENB, S1AP_UE_CTXT_MODIFICATION_FAIL);
S1AP_UE_CTXT_MODIFICATION_FAIL (msg_fail_p).eNB_ue_s1ap_id = eNB_ue_s1ap_id;
......
openair2/UTIL/OMG/common.c
View file @ f2f32f53
......@@ -199,7 +199,11 @@ display_node_list (node_list * node_vector)
//use a python script to postprocess the positions, check the
// support: view node mobility of one node during the entire simulation OR only one snapshot
LOG_F(OMG,"%d; %.3f; %.3f; %.3f\n",
/* TODO: this LOG_F generates a warning, below is a fix that removes a %.3f, maybe it's not the correct fix */
/*LOG_F(OMG,"%d; %.3f; %.3f; %.3f\n",
tmp->node->id,
tmp->node->x_pos, tmp->node->y_pos);*/
LOG_F(OMG,"%d; %.3f; %.3f\n",
tmp->node->id,
tmp->node->x_pos, tmp->node->y_pos);
......
openair2/UTIL/OPT/probe.c
View file @ f2f32f53
......@@ -159,7 +159,7 @@ static void *opt_listener_thread(void *arg)
pthread_exit(NULL);
} else {
/* Normal read -> discard PDU */
LOG_D(OPT, "Incoming data received from: %s:%u with length %d\n",
LOG_D(OPT, "Incoming data received from: %s:%u with length %zd\n",
inet_ntoa(opt_listener.address.sin_addr),
ntohs(opt_listener.address.sin_port), ret);
}
......@@ -198,7 +198,9 @@ int opt_create_listener_socket(char *ip_address, uint16_t port)
ret = bind(opt_listener.sd, (struct sockaddr*) &opt_listener.address, sizeof(opt_listener.address));
if (ret != 0) {
LOG_E(OPT, "Failed to bind socket to (%s:%u): %s\n", strerror(errno));
LOG_E(OPT, "Failed to bind socket to (%s:%u): %s\n",
inet_ntoa(opt_listener.address.sin_addr),
ntohs(opt_listener.address.sin_port), strerror(errno));
opt_type = OPT_NONE;
close(opt_listener.sd);
opt_listener.sd = -1;
......@@ -358,7 +360,7 @@ static void SendFrame(guint8 radioType, guint8 direction, guint8 rntiType,
(const struct sockaddr *)&g_serv_addr, sizeof(g_serv_addr));
if (bytesSent != frameOffset) {
LOG_W(OPT, "sendto() failed (not a thread-safe func)- expected %d bytes, got %d (errno=%d)\n",
LOG_W(OPT, "sendto() failed (not a thread-safe func)- expected %d bytes, got %ld (errno=%d)\n",
frameOffset, bytesSent, errno);
//exit(1);
}
......
openair2/UTIL/OTG/otg_kpi.c
View file @ f2f32f53
......@@ -216,7 +216,7 @@ void average_total_jitter(void)
}
}
LOG_I(OTG,"average_jitter_dl %d average_jitter_ul %lf \n",otg_info->average_jitter_dl,otg_info->average_jitter_ul );
LOG_I(OTG,"average_jitter_dl %lf average_jitter_ul %lf \n",otg_info->average_jitter_dl,otg_info->average_jitter_ul );
// otg_info->average_jitter_dl/= (float)NB_UE_INST;
// otg_info->average_jitter_ul/= (float)NB_UE_INST;
}
......
openair2/UTIL/OTG/otg_rx.c
View file @ f2f32f53
......@@ -106,8 +106,10 @@ int otg_rx_pkt(const int dst_instanceP, const int ctime, const char * const buff
if (dst_instance != dst_instanceP) {
//#warning "LG: TODO think about multicast traffic"
LOG_W(OTG,"[SRC %d][DST %d] [FLOW_idx %d][APP TYPE %d] RX INFO pkt at time %d: flag 0x %x, seq number %d, tx time %d, size (hdr %d, pdcp %d) not for dest instance %u\n",
dst_instanceP);
/* TODO: fix this LOG, a lot of missing parameters, replaced by a simple basic version */
/*LOG_W(OTG,"[SRC %d][DST %d] [FLOW_idx %d][APP TYPE %d] RX INFO pkt at time %d: flag 0x %x, seq number %d, tx time %d, size (hdr %d, pdcp %d) not for dest instance %u\n",
dst_instanceP);*/
LOG_W(OTG,"dst_instance != dst_instanceP\n");
}
if(otg_hdr_rx->traffic_type > MAX_NUM_APPLICATION) {
......@@ -246,7 +248,7 @@ int otg_rx_pkt(const int dst_instanceP, const int ctime, const char * const buff
ctime - otg_hdr_rx->time,
nb_loss_pkts);
LOG_I(OTG,"INFO LATENCY :: [SRC %d][DST %d] radio access %.2f (tx time %d, ctime %d), OWD:%.2f (ms):\n",
LOG_I(OTG,"INFO LATENCY :: [SRC %d][DST %d] radio access %.2f (tx time %d, ctime %d), OWD:%d (ms):\n",
src_instance,
dst_instance,
otg_multicast_info->radio_access_delay[src_instance][dst_instance],
......
openair2/UTIL/OTG/otg_tx.c
View file @ f2f32f53
......@@ -305,10 +305,10 @@ unsigned char *packet_gen(
otg_info->tx_num_pkt[src_instance][dst_instance][otg_info->traffic_type[src_instance][dst_instance]]+=1;
if (size!=strlen(payload))
LOG_E(OTG,"[%d][%d] [0x %x] The expected packet size does not match the payload size : size %d, strlen %d, seq_num %d packet: |%s|%s| \n",
LOG_E(OTG,"[%d][%d] [0x %x] The expected packet size does not match the payload size : size %d, strlen %zu, seq_num %d packet: |%s|%s| \n",
src_instance, dst_instance, flag, size, strlen(payload), seq_num, header, payload);
else
LOG_D(OTG,"[%d][%d] 0x %x][m2m Aggre %d][Flow %d][Type %d/%s] TX INFO pkt at time %d Size= [payload %d] [Total %d] with seq num %d, state=%d : |%s|%s| \n",
LOG_D(OTG,"[%d][%d] 0x %x][m2m Aggre %d][Flow %d][Type %d/%s] TX INFO pkt at time %d Size= [payload %d] [Total %zu] with seq num %d, state=%d : |%s|%s| \n",
src_instance, dst_instance, flag,
otg_info->m2m_aggregation[src_instance][dst_instance],
otg_info->flow_id[src_instance][dst_instance],
......@@ -335,7 +335,7 @@ unsigned char *packet_gen(
otg_info->seq_num_background[src_instance][dst_instance]+=1;
if (otg_info->size_background[src_instance][dst_instance]!=strlen(payload))
LOG_E(OTG,"[%d][%d] [0x %x] The expected packet size does not match the payload size : size %d, strlen %d, seq num %d, packet |%s|%s| \n",
LOG_E(OTG,"[%d][%d] [0x %x] The expected packet size does not match the payload size : size %d, strlen %zu, seq num %d, packet |%s|%s| \n",
src_instance,
dst_instance,
flag,
......@@ -345,7 +345,7 @@ unsigned char *packet_gen(
header,
payload);
else
LOG_D(OTG,"[%d][%d][%s][0x %x] TX INFO pkt at time %d size is %d with seq num %d, state=%d : |%s|%s| \n",
LOG_D(OTG,"[%d][%d][0x %x][%d] TX INFO pkt at time %s size is %d with seq num %d, state=%d : |%s|%s| \n",
src_instance,
dst_instance,
flag,
......@@ -459,10 +459,10 @@ unsigned char *packet_gen_multicast(
otg_multicast_info->tx_num_bytes[src_instance][dst_instance][app]);
if (size!=strlen(payload))
LOG_E(OTG,"[src %d][dst %d] The expected packet size does not match the payload size : size %d, strlen %d \n",
LOG_E(OTG,"[src %d][dst %d] The expected packet size does not match the payload size : size %d, strlen %zu \n",
src_instance, dst_instance, size, strlen(payload));
else {
LOG_I(OTG,"[src %d][dst %d]TX INFO pkt at time %d Size= [payload %d] [Total %d] with seq num %d: |%s|%s| \n",
LOG_I(OTG,"[src %d][dst %d]TX INFO pkt at time %d Size= [payload %d] [Total %zu] with seq num %d: |%s|%s| \n",
src_instance,
dst_instance,
ctime,
......@@ -838,7 +838,7 @@ unsigned int header_size(const int hdr_size)
if (hdr_size>(sizeof(otg_hdr_info_t) + sizeof(otg_hdr_t)))
size-=(sizeof(otg_hdr_info_t) + sizeof(otg_hdr_t));
else
LOG_W(OTG,"OTG Header not included inside packet header (OTG header:%d, Header%d)\n", hdr_size, sizeof(otg_hdr_info_t) + sizeof(otg_hdr_t) );
LOG_W(OTG,"OTG Header not included inside packet header (OTG header:%d, Header%zu)\n", hdr_size, sizeof(otg_hdr_info_t) + sizeof(otg_hdr_t) );
return(size);
......@@ -1211,7 +1211,7 @@ void init_predef_traffic(
break;
case M2M_TRAFFIC : /* example of M2M traffic */
LOG_I(OTG," M2M_TRAFFIC, src = %d, dst = %d \n", i, j, g_otg->application_type[i][j][k]);
LOG_I(OTG," M2M_TRAFFIC, src = %d, dst = %d, application type = %d\n", i, j, g_otg->application_type[i][j][k]);
g_otg->trans_proto[i][j][k] = TCP;
g_otg->ip_v[i][j][k] = IPV4;
g_otg->pu_size_pkts[i][j][k]=50;
......@@ -2015,7 +2015,7 @@ void state_management(
&& (otg_info->state_transition_prob[src_instance][dst_instance][application]<=1))
&& (otg_info->c_holding_time_off[src_instance][dst_instance]>=g_otg->holding_time_off_pe[src_instance][dst_instance])) {
otg_info->state[src_instance][dst_instance][application]=PE_STATE;
LOG_I(OTG,"[%d][%d][Appli id %d][Agg Level=%d] NEW STATE:: OFF-->PE \n", src_instance, dst_instance,application, g_otg->aggregation_level[src_instance][dst_instance]);
LOG_I(OTG,"[%d][%d][Appli id %d][Agg Level=%d] NEW STATE:: OFF-->PE \n", src_instance, dst_instance,application, g_otg->aggregation_level[src_instance][dst_instance][application]);
otg_info->state_transition_prob[src_instance][dst_instance][application]=uniform_dist(0,1);
} else {
......
openair3/GTPV1-U/nw-gtpv1u/src/NwGtpv1u.c
View file @ f2f32f53
......@@ -410,7 +410,7 @@ nwGtpv1uDestroyTunnelEndPoint( NwGtpv1uStackT *thiz,
NwGtpv1uTunnelEndPointT *pRemovedTeid;
if(pUlpReq->apiInfo.destroyTunnelEndPointInfo.hStackSessionHandle) {
GTPU_DEBUG( "Destroying Tunnel end-point '%x'",
GTPU_DEBUG( "Destroying Tunnel end-point '%lx'",
pUlpReq->apiInfo.destroyTunnelEndPointInfo.hStackSessionHandle);
pRemovedTeid = RB_REMOVE(NwGtpv1uTunnelEndPointIdentifierMap, &(thiz->teidMap),
(NwGtpv1uTunnelEndPointT *)(
......@@ -423,7 +423,7 @@ nwGtpv1uDestroyTunnelEndPoint( NwGtpv1uStackT *thiz,
(NwGtpv1uTunnelEndPointT *)
pUlpReq->apiInfo.destroyTunnelEndPointInfo.hStackSessionHandle);
} else {
GTPU_WARNING("Non-existent Tunnel end-point handle '%x'",
GTPU_WARNING("Non-existent Tunnel end-point handle '%lx'",
pUlpReq->apiInfo.destroyTunnelEndPointInfo.hStackSessionHandle);
}
......
openair3/NAS/COMMON/API/NETWORK/nas_message.c
View file @ f2f32f53
......@@ -523,7 +523,7 @@ int nas_message_encode(
/* Compute the NAS message authentication code */
LOG_TRACE(DEBUG,
"offset %d = %d - %d, hdr encode = %d, length = %d bytes = %d",
offset, size, sizeof(uint8_t),
offset, size, (int)sizeof(uint8_t),
size, length, bytes);
uint32_t mac = _nas_message_get_mac(
buffer + offset,
......
openair3/NAS/COMMON/UTIL/nas_log.h
View file @ f2f32f53
......@@ -131,7 +131,7 @@ do {
do { \
nas_log_func_indent -= 2; \
LOG_D(NAS, " %s:%d %*sLeaving %s(rc = %ld)\n", __FILE__, __LINE__, nas_log_func_indent, "", \
__FUNCTION__, (long) rETURNcODE); \
__FUNCTION__, (long) (rETURNcODE)); \
return (rETURNcODE); \
} while (0)
......@@ -146,7 +146,7 @@ extern int nas_log_func_indent;
# define LOG_FUNC_RETURN(rETURNcODE) \
do { \
LOG_TRACE(FUNC_OUT, "Leaving %s(rc = %ld)", __FUNCTION__, \
(long) rETURNcODE); \
(long) (rETURNcODE)); \
return (rETURNcODE); \
} while(0)
......
openair3/NAS/UE/EMM/IdleMode.c
View file @ f2f32f53
......@@ -807,8 +807,7 @@ int emm_proc_plmn_selection_end(int found, tac_t tac, ci_t ci, AcT_t rat)
if (is_forbidden) {
/* The selected cell is known not to be able to provide normal
* service */
LOG_TRACE(INFO, "EMM-IDLE - UE may camp on this acceptable cell ",
"for limited services");
LOG_TRACE(INFO, "EMM-IDLE - UE may camp on this acceptable cell for limited services");
/* Save the index of the first forbidden PLMN */
if (_emm_plmn_list.fplmn < 0) {
......@@ -819,8 +818,7 @@ int emm_proc_plmn_selection_end(int found, tac_t tac, ci_t ci, AcT_t rat)
} else {
/* A suitable cell has been found and the PLMN or tracking area
* is not in the forbidden list */
LOG_TRACE(INFO, "EMM-IDLE - UE may camp on this suitable cell ",
"for normal services");
LOG_TRACE(INFO, "EMM-IDLE - UE may camp on this suitable cell for normal services");
_emm_plmn_list.fplmn = -1;
_emm_plmn_list.param[index].stat = NET_OPER_CURRENT;
emm_sap.primitive = EMMREG_REGISTER_CNF;
......
openair3/S1AP/s1ap_eNB_handlers.c
View file @ f2f32f53
......@@ -205,7 +205,7 @@ int s1ap_eNB_handle_message(uint32_t assoc_id, int32_t stream,
if (message.procedureCode > sizeof(messages_callback) / (3 * sizeof(
s1ap_message_decoded_callback))
|| (message.direction > S1AP_PDU_PR_unsuccessfulOutcome)) {
S1AP_ERROR("[SCTP %d] Either procedureCode %d or direction %d exceed expected\n",
S1AP_ERROR("[SCTP %d] Either procedureCode %ld or direction %d exceed expected\n",
assoc_id, message.procedureCode, message.direction);
return -1;
}
......@@ -214,7 +214,7 @@ int s1ap_eNB_handle_message(uint32_t assoc_id, int32_t stream,
* This can mean not implemented or no procedure for eNB (wrong direction).
*/
if (messages_callback[message.procedureCode][message.direction-1] == NULL) {
S1AP_ERROR("[SCTP %d] No handler for procedureCode %d in %s\n",
S1AP_ERROR("[SCTP %d] No handler for procedureCode %ld in %s\n",
assoc_id, message.procedureCode,
s1ap_direction2String[message.direction]);
return -1;
......@@ -452,10 +452,10 @@ int s1ap_eNB_handle_error_indication(uint32_t assoc_id,
return -1;
}
if ( s1_error_indication_p->presenceMask & S1AP_ERRORINDICATIONIES_MME_UE_S1AP_ID_PRESENT) {
S1AP_WARN("Received S1 Error indication MME UE S1AP ID 0x%x\n", s1_error_indication_p->mme_ue_s1ap_id);
S1AP_WARN("Received S1 Error indication MME UE S1AP ID 0x%lx\n", s1_error_indication_p->mme_ue_s1ap_id);
}
if ( s1_error_indication_p->presenceMask & S1AP_ERRORINDICATIONIES_ENB_UE_S1AP_ID_PRESENT) {
S1AP_WARN("Received S1 Error indication eNB UE S1AP ID 0x%x\n", s1_error_indication_p->eNB_UE_S1AP_ID);
S1AP_WARN("Received S1 Error indication eNB UE S1AP ID 0x%lx\n", s1_error_indication_p->eNB_UE_S1AP_ID);
}
if ( s1_error_indication_p->presenceMask & S1AP_ERRORINDICATIONIES_CAUSE_PRESENT) {
......@@ -710,7 +710,7 @@ int s1ap_eNB_handle_initial_context_request(uint32_t assoc_id,
if ((ue_desc_p = s1ap_eNB_get_ue_context(mme_desc_p->s1ap_eNB_instance,
initialContextSetupRequest_p->eNB_UE_S1AP_ID)) == NULL) {
S1AP_ERROR("[SCTP %d] Received initial context setup request for non "
"existing UE context 0x%06x\n", assoc_id,
"existing UE context 0x%06lx\n", assoc_id,
initialContextSetupRequest_p->eNB_UE_S1AP_ID);
return -1;
}
......@@ -835,7 +835,7 @@ int s1ap_eNB_handle_ue_context_release_command(uint32_t assoc_id,
if ((ue_desc_p = s1ap_eNB_get_ue_context(mme_desc_p->s1ap_eNB_instance,
enb_ue_s1ap_id)) == NULL) {
S1AP_ERROR("[SCTP %d] Received UE context release command for non "
"existing UE context 0x%06x\n",
"existing UE context 0x%06lx\n",
assoc_id,
enb_ue_s1ap_id);
/*MessageDef *msg_complete_p;
......@@ -900,7 +900,7 @@ int s1ap_eNB_handle_e_rab_setup_request(uint32_t assoc_id,
if ((ue_desc_p = s1ap_eNB_get_ue_context(mme_desc_p->s1ap_eNB_instance,
s1ap_E_RABSetupRequest->eNB_UE_S1AP_ID)) == NULL) {
S1AP_ERROR("[SCTP %d] Received initial context setup request for non "
"existing UE context 0x%06x\n", assoc_id,
"existing UE context 0x%06lx\n", assoc_id,
s1ap_E_RABSetupRequest->eNB_UE_S1AP_ID);
return -1;
}
......@@ -915,7 +915,7 @@ int s1ap_eNB_handle_e_rab_setup_request(uint32_t assoc_id,
ue_desc_p->rx_stream = stream;
if ( ue_desc_p->mme_ue_s1ap_id != s1ap_E_RABSetupRequest->mme_ue_s1ap_id){
S1AP_WARN("UE context mme_ue_s1ap_id is different form that of the message (%d != %d)",
S1AP_WARN("UE context mme_ue_s1ap_id is different form that of the message (%d != %ld)",
ue_desc_p->mme_ue_s1ap_id, s1ap_E_RABSetupRequest->mme_ue_s1ap_id);
}
......
openair3/UDP/udp_eNB_task.c
View file @ f2f32f53
......@@ -379,7 +379,7 @@ void *udp_eNB_task(void *args_p)
sizeof(struct sockaddr_in));
if (bytes_written != udp_data_req_p->buffer_length) {
LOG_E(UDP_, "There was an error while writing to socket %u rc %d"
LOG_E(UDP_, "There was an error while writing to socket %d rc %zd"
"(%d:%s) May be normal if GTPU kernel module loaded on same host (may NF_DROP IP packet)\n",
udp_sd, bytes_written, errno, strerror(errno));
}
......
targets/RT/USER/lte-enb.c
View file @ f2f32f53
......@@ -934,12 +934,12 @@ void rx_fh_if5(PHY_VARS_eNB *eNB,int *frame, int *subframe) {
if (proc->first_rx == 0) {
if (proc->subframe_rx != *subframe){
LOG_E(PHY,"Received Timestamp doesn't correspond to the time we think it is (proc->subframe_rx %d, subframe %d)\n",proc->subframe_rx,subframe);
LOG_E(PHY,"Received Timestamp doesn't correspond to the time we think it is (proc->subframe_rx %d, subframe %d)\n",proc->subframe_rx,*subframe);
exit_fun("Exiting");
}
if (proc->frame_rx != *frame) {
LOG_E(PHY,"Received Timestamp doesn't correspond to the time we think it is (proc->frame_rx %d frame %d)\n",proc->frame_rx,frame);
LOG_E(PHY,"Received Timestamp doesn't correspond to the time we think it is (proc->frame_rx %d frame %d)\n",proc->frame_rx,*frame);
exit_fun("Exiting");
}
} else {
......@@ -1083,7 +1083,9 @@ void wakeup_slaves(eNB_proc_t *proc) {
// wake up slave FH thread
// lock the FH mutex and make sure the thread is ready
if (pthread_mutex_timedlock(&slave_proc->mutex_FH,&wait) != 0) {
LOG_E( PHY, "[eNB] ERROR pthread_mutex_lock for eNB CCid %d slave CCid %d (IC %d)\n",proc->CC_id,slave_proc->CC_id);
/* TODO: fix this log, what is 'IC'? */
/*LOG_E( PHY, "[eNB] ERROR pthread_mutex_lock for eNB CCid %d slave CCid %d (IC %d)\n",proc->CC_id,slave_proc->CC_id);*/
LOG_E( PHY, "[eNB] ERROR pthread_mutex_lock for eNB CCid %d slave CCid %d\n",proc->CC_id,slave_proc->CC_id);
exit_fun( "error locking mutex_rxtx" );
break;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment