Summary: It's already not async-signal-safe so just use the fast version of getting the unsymbolized stack traces.

Reviewed By: chadaustin

Differential Revision: D29439597

fbshipit-source-id: 5a727d6a1c37a1c29bce84d866bf4863774c5ff1

Reviewed By: Mizuchi

Differential Revision: D29329759

fbshipit-source-id: 588aa9ce11db2c1aea51dcf96e0de3b50633fa29

Summary:
This diff adds a computeChainCapacity method to IOBuf.

This method will loop through each chain of an IOBuf and return the total capacity of all IOBuf chains. This method is used very similarly to computeChainDataLength(), except rather than returning total data length, it returns total capacity.

Reviewed By: yfeldblum

Differential Revision: D28875393

fbshipit-source-id: 7e5f4a93916fa6c30eef8f8ee8c346a4537302af

Summary: If a callback associated with an observer depends on yet another observer, the callback may be called more than once per distinct snapshot of the associated observer. This diff fixes this problem.

Reviewed By: andriigrynenko

Differential Revision: D29313796

fbshipit-source-id: 345bfa0a1ac9dfaee806be21256088d4667aef15

Summary:
To support "clearing" a ring-buffer without violating TurnSequencer's
invariants, allow storing a Cursor and comparing them in a loop.

Differential Revision: D29345250

fbshipit-source-id: d1d3bbd0b38489690334bdd63a7f40d9f6bad6c6

Summary: The CancellationSource already provides this synchronization

Reviewed By: yfeldblum

Differential Revision: D29368728

fbshipit-source-id: 085467d1fcb70d6fc059174ec673f7825025c076

Summary: The empty size of UnboundedQueue is hundreds of bytes, which is a problem for many users of AsyncPipe. Switch the default to a smaller queue, adding a template parameter so high-throughput users can switch back.

Differential Revision: D29375068

fbshipit-source-id: 9fb2dad81697eeb70d58929e6b9c1c64102aa4a8

Summary: A smaller version of coro::UnboundedQueue to make AsyncPipe usable in memory-constrained programs.

Reviewed By: yfeldblum

Differential Revision: D29375067

fbshipit-source-id: 5d27e4514312d2748055be764af88c0688d46065

Summary: Cycle detection can be very expensive, so it's better to disable it in opt mode. Because of that we need to make sure we catch such cycles in dbg builds, so we have to replace exceptions with LOG(FATAL).

Reviewed By: joshkirstein

Differential Revision: D29367695

fbshipit-source-id: 9c2038eb5b42f98f4ab997f963b6a131b8d26cf9

Summary: There is a golden image of the `Core` layout so that tests will catch accidental increases of the `Core` size. Updated it to the latest `Core` layout.

Differential Revision: D29251632

fbshipit-source-id: d16086390548848f4302678e0b86d9841be1140b

Summary:
- `std::is_pod_v` is only available in C++17, shifting to `std::is_pod`
- `std::errc` needs the `system_error` header; missing header wasn't causing an error on most platforms because it is included indirectly

Differential Revision: D29355681

fbshipit-source-id: e035c3f4ffac9d2c6f0d8ec511f7e0ea8544ba80

Summary: Remove dependency on `folly/FixedString.h`

Differential Revision: D29317987

fbshipit-source-id: dbce91f117776a1dcd966230d9eed616b2a95613

Summary:
D28945040 added `collectAny()` which early-returns when any of the SemiAwaitables produces a value (or exception).  There's the potential for discarded results, however - multiple SemiAwaitables can produce results depending on whether they're at a cancellation point and when cancellation is signaled.

This diff adds a variant `collectAnyNoDiscard()` that signals cancellation when any SemiAwaitable finishes and returns *all* results that completed.  It produces a tuple of optional values from the SemiAwaitables (or `std::nullopt` if it was canceled).

Reviewed By: iahs

Differential Revision: D29240725

fbshipit-source-id: 3e664339e8692cbb9114138a96345cf9f9d5cb0b

Summary:
Bring Watchman closer to the EdenFS file name convention by moving
source files and includes into watchman/.

Reviewed By: fanzeyi

Differential Revision: D29242789

fbshipit-source-id: 6e29a4a50e7202dbf6b603ccc7e4c8184afeb115

Summary: Move some of the test utilities into `TcpInfoTestUtil.h` to enable use by other components.

Differential Revision: D29307490

fbshipit-source-id: 978947ff57ed02e438addf6190a4ea9955596333

Summary:
## An Overview of ConcurrentSkipList Synchronization
folly::ConcurrentSkipList, at a high level, is a normal skip list, except:
* Access to the nodes' "next" pointers are atomic. (The implementation used release/consume, which this diff changes to release/acquire. It's not clear the original use for consume was correct, and consume is very complicated without any practical benefit, so we should just avoid it.)
* All accesses (read/write) must go through an Accessor, which basically is nothing except an RAII object that calls addRef() on construction and releaseRef() on destruction.
* Deleting a node will defer the deletion to a "recycler", which is just a vector of nodes to be recycled. When releaseRef() drops the refcount to zero, the nodes in the recycler are deleted.

Intuitively speaking, when refcount drops to zero, it is safe to delete the nodes in the recycler because nobody holds any Accessors. It's a very simple way to manage the lifetime of the nodes, without having to worry about *which* nodes are accessed or to be deleted.

However, this refcount/recycling behavior is very hard to get right when using atomics as the main synchronization mechanism. In the buggy implementation before this diff, I'll highlight three relevant parts:
* To find an element in the skip list (either to fetch, insert, or delete), we start from the head node and skips by following successor pointers at the appropriate levels until we arrives at the node in question. Rough pseudocode:
  ```
  def find(val):
    node = head
    while read(node) < val:
      node = skip(node)  # read the node to find the successor at some level
    return node
  ```

* To delete an element from the skip list, after finding the element, we modify the predecessor at each level by changing their successors to point to the deleted element's successors, and place the deleted element into the recycler.
  ```
  def delete(node):
    for level in range(...):
      node->pred->setSkip(node->succ)
    recycle(node)

  def recycle(node):
    lock(RECYCLER_LOCK)
    recycler.add(node)
    unlock(RECYCLER_LOCK)
  ```

* releaseRef() and addRef():
  ```
  def releaseRef():
    if refcount > 1:
      refcount--
      return

    lock(RECYCLER_LOCK)
    if refcount > 1:
      refcount--
      return
    to_recycle, recycler = recycler, [] # swap out nodes to recycle
    unlock(RECYCLER_LOCK)

    for node in to_recycle:
      free(node)
    refcount--

  def addRef():
    recount++
  ```

## The Safety Argument
The Accessor/deletion mechanism is safe if we can ensure the following:
* If for a particular node X, a thread performs read(X) and a different thread performs free(X), the read(X) happens-before free(X).

### Problem 1: Relaxed decrement
The buggy implementation used relaxed memory order when doing `refcount--`. Let's see why this is a problem.

Let thread 1 be the one performing read(X) and let thread 2 be the one performing free(X). The intuitive argument is that free(X) can only happen after the refcount drops to zero, which cannot be true while read(X) is happening. The somewhat more formal argument is that read(X) happens before refcount-- in thread 1, which happens before refcount--, which happens before free(X). But because we use relaxed memory order, the two refcount-- operations do not synchronize.

### Problem 2: Relaxed increment
The implementation also used relaxed memory order for addRef(). Normally, for a refcount, it is OK to use relaxed increments, but this refcount is different: the count can go back up once it reaches zero. When reusing refcounts this way, we can no longer use relaxed increment.

To see why, suppose thread 2 performs the following in this order:
```
setSkip(P, not X)  # step before deleting X; P is a predecessor at some level
recycle(X)
refcount-- # acq_rel, gets 0
free(X)
```
and thread 2 performs the following in this order:
```
refcount++ # relaxed
skip(P) # gets X
read(X)
```
See Appendix A below; it's possible for the refcount to reach 0, and thread 2 to get X when reading the successor from P. This means that free(X) might theoretically still race with read(X), as we failed to show that once we delete something from the skip list, another accessor can't possibly reach X again.

This might feel like an unnecessary argument, but without this reasoning, we would not have found a problem even if we just modified releaseRef() to instead delete some random nodes from the list. That will certainly cause trouble when someone else later tries to read something.

### Problem 3: No release operation on refcount before freeing nodes
This is much more subtle. Suppose thread 1 performs the following:
```
refcount--  # end of some previous accessor
refcount++  # begin of new accessor
skip(P)
```
and thread 2 does this:
```
setSkip(P, not X)  # step before deleting X; P is a predecessor
recycle(X)
read(refcount) # gets 1, proceeds to lock
lock(RECYCLER_LOCK)
read(refcount) # gets 1  ***
unlock(RECYCLER_LOCK)
free(X)
refcount--
```

The interleaving to make this possible is:
```
thread 1 refcount--
thread 2 everything until free(X)
thread 1 refcount++
thread 2 free(X)
thread 2 refcount--
```

We wish to show that `setSkip(P, not X)` happens before `skip(P)`, because this will allow us to prove that `skip(P) != X` (otherwise, we would not be able to show that a subsequent read(X) in thread 1 happens before free(X) - it might legitimately not).

The intuitive argument is that `setSkip(P, not X)` happened before we decrement the refcount, which happens before the increment of the refcount in thread 1, which happens before `skip(P)`. However, because thread 2 actually decremented refcount quite late, it might be the case that thread 1's `refcount++` happened before thread 2's `refcount--` (and the increment synchronized with its own decrement earlier). There's nothing else in the middle that provided a synchronizes-with relationship (in particular, the read(refcount) operations do not provide synchronization because those are *loads* - wrong direction!).

### Correct implementation
In addition to using acq_rel memory order on all operations on refcount, this diff modifies releaseRef() like this:
```
def releaseRef():
  if refcount > 1: # optimization
    refcount--
    return

  lock(RECYCLER_LOCK)
  if --refcount == 0:  # "GUARD"
    to_recycle, recycler = recycler, [] # swap out nodes to recycle
  unlock(RECYCLER_LOCK)

  for node in to_recycle:
    free(node)
```

I'll use "GUARD" to denote the event that the --refcount within the lock *returns 0*. I'll use this for the correctness proof.

### Correct implementation proof
The proof will still be to show that if thread 1 performs read(X) and thread 2 performs free(X), read(X) happens-before free(X).

Proof: thread 1 must have grabbed an accessor while reading X, so its sequence of actions look like this:
```
refcount++
skip(P)  # gets X
read(X)
refcount--
```
thread 2 performs:
```
GUARD
free(X)
```

Now, all writes on refcount are RMW operations and they all use acq_rel ordering, so all the RMW operations on refcount form a total order where successive operations have a synchronizes-with relationship. We'll look at where GUARD might stand in this total order.

* Case 1: GUARD is after refcount-- from thread 1 in the total order.
  * In this case, read(X) happens before refcount-- in thread 1, which happens before GUARD, which happens before free(X).
* Case 2: GUARD is between refcount++ and refcount-- from thread 1 in the total order.
  * In this case, observe (by looking at the total ordering on refcount RMW) that we have at least two threads (1 and 2) that contribute 1 to the refcount, right before GUARD. In other words, GUARD could not possibly have returned 0, which is a contradiction.
* Case 3: GUARD is before refcount++ from thread 1 in the total order.
  * Let `setSkip(P, not X)` be a predecessor write operation before X is added to the recycler (this can happen on any thread). We will prove in the below lemma that `setSkip(P, not X)` happens before GUARD. Once we have that, then `setSkip(P, not X)` happens before GUARD which happens before thread 1's refcount++ which happens before `skip(P)`, and that renders it impossible for `skip(P)` to return X, making it a contradiction.

It remains to prove that `setSkip(P, not X)` happens before GUARD.

In the thread that performs an `setSkip(P, not X)` operation, it subsequently performs `recycle(X)`, which adds X to the recycler within RECYCLER_LOCK. In thread 2, GUARD happens within the RECYCLER_LOCK, and the subsequent swapping of the recycler vector contained X (which is shown by the fact that we free(X) after GUARD), so the lock must have been grabbed *after* the lock that added X to the recycler. In other words, we have the relationship that `setSkip(P, not X)` happens before `recycler.add(X)` which happens before `unlock(RECYCLER_LOCK)` which happens before `lock(RECYCLER_LOCK)` which happens before GUARD.

Note that just like the original implementation, the optimization on top of releaseRef() is not a perfect optimization; it may delay the deletion of otherwise safe-to-delete nodes. However, that does not affect our correctness argument because it's always at least as safe to *delay* deletions (this hand-wavy argument is not part of the proof).

## Appendix A
Consider the following two threads:
```
std::atomic<int> x{0}, y{1};
// Thread 1:
x.store(1, std::memory_order_release);  // A
int y1 = y.fetch_add(-1, std::memory_order_acq_rel);  // B

// Thread 2:
y.fetch_add(1, std::memory_order_relaxed);  // C
int x2 = x.load(std::memory_order_acquire);  // D
```
Intuitively, if y1 = 1, then thread 1's fetch_add was executed first, so thread 2 should get x2 = 1. Otherwise, if thread 2's fetch_add happened first, then y1 = 2, and x2 could be either 0 or 1.

But, could it happen that y1 = 1 and x2 = 0? Let's look at the happens-before relationships between these operations. For intra-thread (sequenced-before), we have A < B and C < D (I'm using < to denote happens-before). Now, for inter-thread (synchronizes-with), the only pair that could establish a synchronizes-with relationship is A and D. (B and C is not eligible because C uses relaxed ordering.) For y1 = 1 and x2 = 0 to happen, we must not have D read the result of A, so it must be the case that they A does not synchronize-with D. But that's as far as we can go; there's nothing that really enforces much of an ordering between the two threads.

We can also think about this in terms of reordering of memory operations. Thread 1 is pretty safe from reordering because of the acq_release, but in thread 2, an "acquire" ordering typically means no memory operations after D may be reordered before D, but it doesn't prevent C from being reordered after D. C itself does not prevent reordering due to it being an relaxed operation. So if thread 2 executed D and then C, then it would be trivially possible to have y1 = 1 and x2 = 0.

The point of this is to highlight that just by having a release/acquire pair does not magically *order* them. The pair merely provides a synchronizes-with relationship *if* the read happens to obtain the value written by the write, but not any guarantees of *which* value would be read.

## Appendix B
Problem 1 is detected by TSAN, but problems 2 and 3 are not. Why?

TSAN detects data races by deriving synchronization relationships from the *actual* interleaving of atomics at runtime. If the actual interleaving would always happen but is not *guaranteed* by the standard, there may be a real undetected data race.

For example, it is well known that the following code will be detected by TSAN as a data race on int "x":
```
int x = 1;
std::atomic<bool> y{false};

// Thread 1
x = 2;
y.store(true, memory_order_relaxed);

// Thread 2
while (!y.load(memory_order_acquire)) {  // acquire is useless because writer used relaxed
}
std::cout << x << std::endl;
```
TSAN reports a data race on x because `y` failed to provide proper synchronizes-with relationship between the two threads due to incorrect memory ordering. However, when compiling on x86, most likely we will end up with a binary that always guarantees the intuitively desired behavior anyway.

So now consider the following code:
```
std::atomic<int> x = 1;
std::atomic<bool> y{false};
int z = 8;

// Thread 1
z = 9;
x.store(2, memory_order_release);
y.store(true, memory_order_relaxed);

// Thread 2
while (!y.load(memory_order_acquire)) {  // acquire is useless because writer used relaxed
}
x.load(memory_order_acquire);
std::cout << z << std::endl;
```
There is a data race on the access to z, because the happens-before chain of `write z -> x.store -> y.store -> y.load -> x.load -> read z` is broken on the `y.store -> y.load` link. However, TSAN will not report a data race, because it sees the chain as `write z -> x.store -> x.load -> read z`. It sees x.store as synchronizing with x.load because it *observed* that the x.load obtained the value written by the x.write *at runtime*, so it inferred that it was valid synchronization. This isn't guaranteed, though, because it's possible in some execution (in theory) that x.load does not get the value written by x.store (similar to Appendix A).

Reviewed By: yfeldblum

Differential Revision: D29248955

fbshipit-source-id: 2a3c9379c7c3a6469183df64582ca9cf763c0890

Summary: the codepath for .then is copying the return value in one place, which prevents using move-only types (and might incur extra costs).

Reviewed By: yfeldblum

Differential Revision: D29159637

fbshipit-source-id: 892b73266cfe45c9e09b9b648d7b7703871c4323

Summary:
Was using the return of `getsockopt` as the number of bytes read, which is incorrect. Changed to using the length field. Also changed how the `Options` fields are initialized to prevent issues on certain platforms.

Will follow up with an integration test.

Differential Revision: D29257090

fbshipit-source-id: 518794c76bf74ab092ed7955c48ec8a3b3472c24

Summary: Extra lookup options should be disabled by default to ensure that things that need them explicitly enable them.

Differential Revision: D29255973

fbshipit-source-id: 5c92ad8685cb2f490aebd55a837a1463a624be97

Summary: Enables an observer to automatically subscribe to all available signals.

Differential Revision: D29255979

fbshipit-source-id: 3675ef9bf2442c3b6e26c331a6089f42c1fd8ee9

Summary: Add missing protection of the new node when replacing an existing node.

Differential Revision: D29271517

fbshipit-source-id: 77812f27c37d4950a6e485db674813fab0cf8772

Summary:
D24094832 (https://github.com/facebook/folly/commit/842ecea531e8d6a90559f213be3793f7cd36781b) added `ByteEvent` support to `AsyncSocket`, making it easier to use socket timestamps for SCHED/TX/ACK events. With D24094832 (https://github.com/facebook/folly/commit/842ecea531e8d6a90559f213be3793f7cd36781b):
- An application can request socket timestamps by installing an observer with `ByteEvents` enabled, and then writing to the socket with a relevant timestamping flag (e.g., `TIMESTAMP_TX`, `TIMESTAMP_ACK`).
- Timestamps are delivered to the observer via the `byteEvent` callback.

This diff enables *observers* to request socket timestamping by interposing between the application and the socket by way of the `prewrite` event:
- Each time bytes from the application are about to be written to the underlying raw socket / FD, `AsyncSocket` will give observers an opportunity to request timestamping via a `prewrite` event.
- If an observer wishes to request timestamping, it can return a `PrewriteRequest` with information about the `WriteFlags` to add.
- If an observer wishes to timestamp a specific byte (first byte, every 1000th byte, etc.), it can request this with the `maybeOffsetToSplitWrite` field — socket timestamp requests apply to the *last byte* in the buffer being written, and thus if an observer wants to timestamp a specific byte, the buffer must be split so that the byte to timestamp is the final byte. The `AsyncSocket` implementation handles this split on behalf of the observer and adds `WriteFlags::CORK` (triggering `MSG_MORE`) where appropriate.
- If multiple observers are attached, `PrewriteRequests` are combined so that all observer needs are satisfied. In addition, `WriteFlags` set by the application and `WriteFlags` set by observers are combined during processing of `PrewriteRequests`.

Reviewed By: yfeldblum

Differential Revision: D24976575

fbshipit-source-id: 885720173d4a9ceefebc929a86d5e0f10f8889c4

Summary:
If we don't find `.debug_aranges`, we used to jump directly to running the line number VM for every single compilation unit (CU). This is obviously not great.

Instead, every CU lists one (or multiple) address ranges that make up its `.text`, so do that first. I think (but haven't benchmarked) that this shouldn't be significantly slower than `.debug_aranges` (probably why clang doesn't emit `.debug_aranges` by default) -- both `.debug_aranges` and this approach suffer from the same drawback: they're grouped by CU instead of being sorted by address, so we still need to iterate for all CUs.

Pull Request resolved: https://github.com/facebook/folly/pull/1607

Reviewed By: yfeldblum

Differential Revision: D29175717

Pulled By: luciang

fbshipit-source-id: d626babdbb7f9a2f7dd51aefd914f6659124eb4e

Summary:
Support class and function names consistent with [WG21 P1121](http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2021/p1121r3.pdf)

hazard_pointer = hazptr_holder
hazard_pointer_obj_base = hazptr_obj_base
hazard_pointer_domain = hazptr_domain
hazard_pointer_default_domain = default_hazptr_domain
hazard_pointer_clean_up = hazptr_cleanup

Reviewed By: yfeldblum

Differential Revision: D29252308

fbshipit-source-id: f5bbf1af87bad4c0d6a54f052b9379c042a724e8

Summary:
Calling `EventBase::terminateLoopSoon` from a different thread should be a thread safe
operation when there is a concurrently executing `loopForever`, immediately
followed by `EventBase` destruction.

Today, we first set the stop_ flag to stop the event loop, then post a message to
tell eventlib to stop its event loop. ... but IIUC the stop_ flag is the thing
that makes the `while()` loop to keep going forever. Thus setting it before
message is posted may result in the `loopForever` terminate and underlying
EventBase destroyed before we are able to post a message to eventlib.

The fix is to set `stop_ = true` in loop.

Reviewed By: yfeldblum, andriigrynenko

Differential Revision: D29143212

fbshipit-source-id: f102fbad31653dd7525eff0f70600aa71ae02534

Summary: Rather than reinventing it in the test.

Reviewed By: markisaa

Differential Revision: D29223788

fbshipit-source-id: 3d35bd0046b876d22cd2397549dcb6f4cc77d688

Summary: Enabled the owner of AsyncUDPServerSocket to call setTimestamping for the underlying AsyncUDPSocket. So in the `onDataAvailable` callback we could have ts set in `OnDataAvailableParams`

Reviewed By: yfeldblum

Differential Revision: D28661584

fbshipit-source-id: d060cfdd8a4e105ada8a2c3b0fd13ddafb6f0d7c

Summary:
A new pattern which creates an invoker type and a variable, both named for the member, with the type suffixed with `_fn` and the instance unsuffixed. Applied to free-invokers, member-invokers, and static-member invokers.

Automatic mangling as this does is not great but this is intended to be used selectively.

Changes the existing unit-tests to use the invoker variables generated by the invoker-suite macros, since the invoker variables depend on the invoker types and the generation of both depends on the invoker macros. So everything gets tested transitively.

Reviewed By: luciang

Differential Revision: D29190157

fbshipit-source-id: 72d8fb622c4c99bae48efc3e5e9f0bd411d6a813

Summary: Use aliases. Reduce the use of the Atom template parameter.

Reviewed By: yfeldblum

Differential Revision: D29206490

fbshipit-source-id: d0637593c48ef150560b4feb47a454afe25ecba6

Summary:
`ASSERT_THAT` is defined in gmock, this adds the equivalent for coroutine code to GmockHelper.

The implementation depends on the inclusion of GtestHelper, but to avoid forcing anyone that includes GmockHelper to also include GtestHelper I didn't add it in the file.

Would it be preferable to include the needed header?

Reviewed By: yfeldblum

Differential Revision: D29067561

fbshipit-source-id: 26aa6021efe55aa03dd7cf064563a732e47e39a1

Summary:
An cross-platform abstraction layer for capturing current TCP and congestion control state.

Fetches information from four different resources:
- `TCP_INFO` (state of TCP)
- `TCP_CONGESTION` (name of congestion control algorithm)
- `TCP_CC_INFO` (details for a given congestion control algorithm)
- `SIOCOUTQ`/`SIOCINQ` (socket buffers)

`TcpInfo` is designed to solve two problems:

**(1) `TcpInfo` unblocks use of the latest `tcp_info` struct and related structs.**

As of 2020, the `tcp_info` struct shipped with glibc (sysdeps/gnu/netinet/tcp.h) has not been updated since 2007 due to compatibility concerns; see commit titled "Update netinet/tcp.h from Linux 4.18" in glibc repository. This creates scenarios where fields that have long been available in the kernel ABI cannot be accessed.

Even if glibc does eventually update the `tcp_info` shipped, we don't want to be limited to their update cycle. `TcpInfo` solves this in two ways:
   - First, `TcpInfoTypes.h` contains a copy of the latest `tcp_info` struct for Linux, and `TcpInfo` always uses this struct for lookups; this decouples `TcpInfo` from glibc's / the platform's `tcp_info`.
   - Second, `TcpInfo` determines which fields in the struct are populated (and thus valid) based on the number of bytes the kernel ABI copies into the struct during the corresponding getsockopt operation. When a field is accessed through `getFieldAsOptUInt64` or through an accessor, `TcpInfo` returns an empty optional if the field is unavailable at run-time.

In this manner, `TcpInfo` enables the latest struct to always be used while ensuring that programs can determine at runtime which fields are available for use --- there's no risk of a program assuming that a field is valid when it in fact was never initialized/set by the ABI.

**(2) `TcpInfo` abstracts platform differences while still keeping details available.**

The `tcp_info` structure varies significantly between Apple and Linux. `TcpInfo` exposes a subset of `tcp_info` and other fields through accessors that hide these differences, and reduce potential errors (e.g., Apple stores srtt in milliseconds, Linux stores in microseconds, `TcpInfo::srtt` does the conversions needed to always return in microseconds). When a field is unavailable on a platform, the accessor returns an empty optional.

In parallel, the underlying structures remain accessible and can be safely accessed through the appropriate `getFieldAsOptUInt64(...)`. This enables platform-specific code to have full access to the underlying structure while also benefiting from `TcpInfo`'s knowledge of whether a given field was populated by the ABI at run-time.

Support for FreeBSD will be added in a subsequent diff.

Differential Revision: D22134355

fbshipit-source-id: accae8762aa88c187cc473b8121df901c6ffb456

Summary:
The semicolons at the end of macros after `do {} while (0)` is useless and may cause potential compile errors in the future.

Pull Request resolved: https://github.com/facebook/folly/pull/1605

Reviewed By: Mizuchi

Differential Revision: D29109549

Pulled By: yfeldblum

fbshipit-source-id: 0c585b2db059bc5f53a31671b044a2b86a707359

Summary: Added set/get APIs to configure TOS for listener sockets. The setListenerTos() sets the TOS for the server sockets and all accepted connections are expected to inherit the same. These APIs would be used by higher layers (like thrift server) to set the TOS on the server socket.

Reviewed By: jmswen

Differential Revision: D28651968

fbshipit-source-id: 30f251970269155adbf5e88e1079096dbeceb216

Summary: `collectAny` does not compile when used with `Task`s that return move only objects

Reviewed By: yfeldblum

Differential Revision: D29137632

fbshipit-source-id: d8fd4f46d4c014c7492dcd2fb7fe84921db8aad0

Summary:
EventBase keeps a registry of EventBaseLocal instances.EventBaseLocal keeps a registry of EventBase instances.
At destruction time, both are trying to remove themselves from the other's registry, and it is possible that dtors are racing each other.

There are two changes to address the race:
1. remove virtual method in EventBaseLocal because calling through vptr makes TSAN unhappy - the underlying vtbl is being mutated during destruction.
2.  Since deregistration involves acquiring two locks, a lock inversion must be avoided. This is achieved by retrying if inner lock acquisition has failed.

Reviewed By: andriigrynenko

Differential Revision: D29120201

fbshipit-source-id: 93c93c8d7cc7126e3432ac06562d55a838008e4a

Summary: As title

Reviewed By: mzlee

Differential Revision: D29140913

fbshipit-source-id: 6a90756f1c340faaf9e857d743ccbeb1dc991b2f

Summary: Stub out sockets when building under EMSCRIPTEN (aka WASM compiler) like was done in D26579892 (https://github.com/facebook/folly/commit/c76b89b60652af52ee163795d526f2f10a114b20) for XROS.

Reviewed By: yfeldblum

Differential Revision: D28107594

fbshipit-source-id: 8a0d3033793a857cce587c5349934bc6f2a4bec5

Summary:
Copied TEST_P def from https://github.com/google/googletest/blob/master/googletest/include/gtest/gtest-param-test.h

Implemented `TestBody()` as `blockingWait(co_TestBody())`. User is responsible for delivering impl of `co_TestBody()`.

Reviewed By: yfeldblum

Differential Revision: D29124282

fbshipit-source-id: ca8e9b874903b84ab529e7eefa6a2b7f72793b9b

Reviewed By: chadaustin

Differential Revision: D29084022

fbshipit-source-id: 0605c1bfdd86ab94f4aa6893737b296ab4cdd913

Summary:
`collectAll` allows to `co_await`s multiple tasks using structured concurrency.

Unfortunately `future::collectAny` does not follow the structured concurrency pattern, and detaches the uncompleted operations.
This can result in memory errors (the coroutines access data that has already been freed).

This diff introduces `coro::collectAny`, which given a number of awaitables it returns the result of the first awaitable to finish, in addition to its index, cancels the remaining operations **and waits for them to complete**.

The implementation uses `collectAll` as a building block.
The return signature mirrors the one from `future::collectAny`.

Reviewed By: yfeldblum, rptynan

Differential Revision: D28945040

fbshipit-source-id: 402be03e004d373cbc74821ae8282b1aaf621b2d