Add configuration files for nFAPI split with RFSim and 100MHz

targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb-pnf.band78.rfsim.2x2.conf

+log_config = {
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+};
+
+L1s = ({
+  num_cc = 1;
+  tr_n_preference  = "nfapi";
+  remote_n_address = "127.0.0.1"; // vnf addr
+  local_n_address  = "127.0.0.1"; // pnf addr
+  local_n_portc    = 50000; // pnf p5 port [!]
+  remote_n_portc   = 50001; // vnf p5 port
+  local_n_portd    = 50010; // pnf p7 port
+  remote_n_portd   = 50011; // vnf p7 port
+});
+
+RUs = ({
+  local_rf   = "yes"
+  sl_ahead   = 5;
+  nb_tx      = 2
+  nb_rx      = 2
+  att_tx     = 0
+  att_rx     = 0;
+  bands      = [78];
+  max_pdschReferenceSignalPower = -27;
+  max_rxgain = 125;
+});

targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb-vnf.sa.band78.273prb.nfapi.conf

+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1 }) });
+
+    nr_cellid = 12345678L;
+
+    ////////// Physical parameters:
+
+    pdsch_AntennaPorts_XP                                     = 2;
+    pusch_AntennaPorts                                        = 2;
+    do_CSIRS                                                  = 1;
+    do_SRS                                                    = 1;
+    min_rxtxtime = 5;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                             = 630048;
+      dl_frequencyBand                                                 = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 626772;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 273;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=27,L=48 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                               = 1099; # 6366 12925 12956 28875 12952
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                   = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                              = 12;
+        initialDLBWPsearchSpaceZero                                     = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 1;
+      ul_carrierBandwidth                                           = 273;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 1099;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 12;
+          preambleReceivedTargetPower                               = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 5;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -70;
+
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 5;
+      nrofDownlinkSlots                                             = 3;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 1;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address      = ( { ipv4       = "192.168.70.132";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+
+    NETWORK_INTERFACES :
+    {
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.70.129/24";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.70.129/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+
+  }
+);
+
+MACRLCs = (
+        {
+        num_cc = 1;
+        remote_s_address = "127.0.0.1"; // pnf addr [!]
+        local_s_address  = "127.0.0.2"; // vnf addr
+        local_s_portc    = 50001; // vnf p5 port
+        remote_s_portc   = 50000; // pnf p5 port [!]
+        local_s_portd    = 50011; // vnf p7 port [!]
+        remote_s_portd   = 50010; // pnf p7 port [!]
+        tr_s_preference = "nfapi";
+        tr_n_preference = "local_RRC";
+        }
+)
+
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config :
+{
+  global_log_level                      ="info";
+  hw_log_level                          ="info";
+  phy_log_level                         ="info";
+  mac_log_level                         ="info";
+  rlc_log_level                         ="info";
+  pdcp_log_level                        ="info";
+  rrc_log_level                         ="info";
+  ngap_log_level                        ="debug";
+  f1ap_log_level                        ="debug";
+};