CI: adding support for F1 CU/DU split testing

  -- Only FDD for the moment
Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

ci-scripts/conf_files/cu.band7.tm1.100PRB.conf

+Active_eNBs = ( "eNB-CU-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs = (
+  {
+    ////////// Identification parameters:
+    eNB_ID    = 0xe00;
+
+    cell_type = "CELL_MACRO_ENB";
+
+    eNB_name  = "eNB-CU-Eurecom-LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } )
+
+    nr_cellid = 12345678L
+
+    tr_s_preference  = "f1"
+
+    local_s_if_name  = "lo";
+    remote_s_address = "127.0.0.3";
+    local_s_address  = "127.0.0.4";
+    local_s_portc    = 501;
+    remote_s_portc   = 500;
+    local_s_portd    = 601;
+    remote_s_portd   = 600;
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+        node_function                           = "3GPP_eNodeB";
+        node_timing                             = "synch_to_ext_device";
+        node_synch_ref                          = 0;
+        frame_type                              = "FDD";
+        tdd_config                              = 3;
+        tdd_config_s                            = 0;
+        prefix_type                             = "NORMAL";
+        eutra_band                              = 7;
+        downlink_frequency                      = 2680000000L;
+        uplink_frequency_offset                 = -120000000;
+        Nid_cell                                = 0;
+        N_RB_DL                                 = 100;
+        pbch_repetition                         = "FALSE";
+        prach_root                              = 0;
+        prach_config_index                      = 0;
+        prach_high_speed                        = "DISABLE";
+        prach_zero_correlation                  = 1;
+        prach_freq_offset                       = 2;
+        pucch_delta_shift                       = 1;
+        pucch_nRB_CQI                           = 0;
+        pucch_nCS_AN                            = 0;
+        pucch_n1_AN                             = 0;
+        pdsch_referenceSignalPower              = -29;
+        pdsch_p_b                               = 0;
+        pusch_n_SB                              = 1;
+        pusch_enable64QAM                       = "DISABLE";
+        pusch_hoppingMode                       = "interSubFrame";
+        pusch_hoppingOffset                     = 0;
+        pusch_groupHoppingEnable                = "ENABLE";
+        pusch_groupAssignment                   = 0;
+        pusch_sequenceHoppingEnabled            = "DISABLE";
+        pusch_nDMRS1                            = 1;
+        phich_duration                          = "NORMAL";
+        phich_resource                          = "ONESIXTH";
+        srs_enable                              = "DISABLE";
+        /*
+        srs_BandwidthConfig                     =;
+        srs_SubframeConfig                      =;
+        srs_ackNackST                           =;
+        srs_MaxUpPts                            =;
+        */
+
+        pusch_p0_Nominal                        = -96;
+        pusch_alpha                             = "AL1";
+        pucch_p0_Nominal                        = -104;
+        msg3_delta_Preamble                     = 6;
+        pucch_deltaF_Format1                    = "deltaF2";
+        pucch_deltaF_Format1b                   = "deltaF3";
+        pucch_deltaF_Format2                    = "deltaF0";
+        pucch_deltaF_Format2a                   = "deltaF0";
+        pucch_deltaF_Format2b                   = "deltaF0";
+
+        rach_numberOfRA_Preambles               = 64;
+        rach_preamblesGroupAConfig              = "DISABLE";
+        /*
+        rach_sizeOfRA_PreamblesGroupA           = ;
+        rach_messageSizeGroupA                  = ;
+        rach_messagePowerOffsetGroupB           = ;
+        */
+        rach_powerRampingStep                   = 4;
+        rach_preambleInitialReceivedTargetPower = -108;
+        rach_preambleTransMax                   = 10;
+        rach_raResponseWindowSize               = 10;
+        rach_macContentionResolutionTimer       = 48;
+        rach_maxHARQ_Msg3Tx                     = 4;
+
+        pcch_default_PagingCycle                = 128;
+        pcch_nB                                 = "oneT";
+        bcch_modificationPeriodCoeff= 2;
+        ue_TimersAndConstants_t300              = 1000;
+        ue_TimersAndConstants_t301              = 1000;
+        ue_TimersAndConstants_t310              = 1000;
+        ue_TimersAndConstants_t311              = 10000;
+        ue_TimersAndConstants_n310              = 20;
+        ue_TimersAndConstants_n311              = 1;
+        ue_TransmissionMode                     = 1;
+
+        //Parameters for SIB18
+        rxPool_sc_CP_Len                                       = "normal";
+        rxPool_sc_Period                                       = "sf40";
+        rxPool_data_CP_Len                                     = "normal";
+        rxPool_ResourceConfig_prb_Num                          = 20;
+        rxPool_ResourceConfig_prb_Start                        = 5;
+        rxPool_ResourceConfig_prb_End                          = 44;
+        rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+        rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+        rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+        rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+        rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+        rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+        /*
+        rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+        rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+        rxPool_dataHoppingConfig_rbOffset                               = 0;
+        rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+        */
+
+        // Parameters for SIB19
+        discRxPool_cp_Len                                               = "normal"
+        discRxPool_discPeriod                                           = "rf32"
+        discRxPool_numRetx                                              = 1;
+        discRxPool_numRepetition                                        = 2;
+        discRxPool_ResourceConfig_prb_Num                               = 5;
+        discRxPool_ResourceConfig_prb_Start                             = 3;
+        discRxPool_ResourceConfig_prb_End                               = 21;
+        discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+        discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+        discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+        discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+        discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+        discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+      }
+    );
+
+
+    srb1_parameters :
+    {
+      # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+      timer_poll_retransmit    = 80;
+
+      # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+      timer_reordering         = 35;
+
+      # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+      timer_status_prohibit    = 0;
+
+      # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+      poll_pdu                 =  4;
+
+      # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+      poll_byte                =  99999;
+
+      # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+      max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+      # Number of streams to use in input/output
+      SCTP_INSTREAMS  = 2;
+      SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address  = (
+      {
+        ipv4       = "CI_MME_IP_ADDR";
+        ipv6       = "192:168:30::17";
+        active     = "yes";
+        preference = "ipv4";
+      }
+    );
+
+    NETWORK_INTERFACES : {
+      ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
+      ENB_IPV4_ADDRESS_FOR_S1_MME   = "CI_ENB_IP_ADDR";
+      ENB_INTERFACE_NAME_FOR_S1U    = "eth0";
+      ENB_IPV4_ADDRESS_FOR_S1U      = "CI_ENB_IP_ADDR";
+      ENB_PORT_FOR_S1U              = 2152; # Spec 2152
+      ENB_IPV4_ADDRESS_FOR_X2C      = "CI_ENB_IP_ADDR";
+      ENB_PORT_FOR_X2C              = 36422; # Spec 36422
+    };
+  }
+);
+
+log_config = {
+  global_log_level            = "info";
+  global_log_verbosity        = "medium";
+  pdcp_log_level              = "info";
+  pdcp_log_verbosity          = "high";
+  rrc_log_level               = "info";
+  rrc_log_verbosity           = "medium";
+  flexran_agent_log_level     = "info";
+  flexran_agent_log_verbosity = "medium";
+  gtp_log_level               = "info";
+  gtp_log_verbosity           = "medium";
+};
+
+NETWORK_CONTROLLER : {
+  FLEXRAN_ENABLED        = "no";
+  FLEXRAN_INTERFACE_NAME = "lo";
+  FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+  FLEXRAN_PORT           = 2210;
+  FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+  FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/conf_files/cu.band7.tm1.25PRB.conf

+Active_eNBs = ( "eNB-CU-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs = (
+  {
+    ////////// Identification parameters:
+    eNB_ID    = 0xe00;
+
+    cell_type = "CELL_MACRO_ENB";
+
+    eNB_name  = "eNB-CU-Eurecom-LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } )
+
+    nr_cellid = 12345678L
+
+    tr_s_preference  = "f1"
+
+    local_s_if_name  = "lo";
+    remote_s_address = "127.0.0.3";
+    local_s_address  = "127.0.0.4";
+    local_s_portc    = 501;
+    remote_s_portc   = 500;
+    local_s_portd    = 601;
+    remote_s_portd   = 600;
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+        node_function                           = "3GPP_eNodeB";
+        node_timing                             = "synch_to_ext_device";
+        node_synch_ref                          = 0;
+        frame_type                              = "FDD";
+        tdd_config                              = 3;
+        tdd_config_s                            = 0;
+        prefix_type                             = "NORMAL";
+        eutra_band                              = 7;
+        downlink_frequency                      = 2680000000L;
+        uplink_frequency_offset                 = -120000000;
+        Nid_cell                                = 0;
+        N_RB_DL                                 = 25;
+        pbch_repetition                         = "FALSE";
+        prach_root                              = 0;
+        prach_config_index                      = 0;
+        prach_high_speed                        = "DISABLE";
+        prach_zero_correlation                  = 1;
+        prach_freq_offset                       = 2;
+        pucch_delta_shift                       = 1;
+        pucch_nRB_CQI                           = 0;
+        pucch_nCS_AN                            = 0;
+        pucch_n1_AN                             = 0;
+        pdsch_referenceSignalPower              = -25;
+        pdsch_p_b                               = 0;
+        pusch_n_SB                              = 1;
+        pusch_enable64QAM                       = "DISABLE";
+        pusch_hoppingMode                       = "interSubFrame";
+        pusch_hoppingOffset                     = 0;
+        pusch_groupHoppingEnable                = "ENABLE";
+        pusch_groupAssignment                   = 0;
+        pusch_sequenceHoppingEnabled            = "DISABLE";
+        pusch_nDMRS1                            = 1;
+        phich_duration                          = "NORMAL";
+        phich_resource                          = "ONESIXTH";
+        srs_enable                              = "DISABLE";
+        /*
+        srs_BandwidthConfig                     =;
+        srs_SubframeConfig                      =;
+        srs_ackNackST                           =;
+        srs_MaxUpPts                            =;
+        */
+
+        pusch_p0_Nominal                        = -96;
+        pusch_alpha                             = "AL1";
+        pucch_p0_Nominal                        = -104;
+        msg3_delta_Preamble                     = 6;
+        pucch_deltaF_Format1                    = "deltaF2";
+        pucch_deltaF_Format1b                   = "deltaF3";
+        pucch_deltaF_Format2                    = "deltaF0";
+        pucch_deltaF_Format2a                   = "deltaF0";
+        pucch_deltaF_Format2b                   = "deltaF0";
+
+        rach_numberOfRA_Preambles               = 64;
+        rach_preamblesGroupAConfig              = "DISABLE";
+        /*
+        rach_sizeOfRA_PreamblesGroupA           = ;
+        rach_messageSizeGroupA                  = ;
+        rach_messagePowerOffsetGroupB           = ;
+        */
+        rach_powerRampingStep                   = 4;
+        rach_preambleInitialReceivedTargetPower = -108;
+        rach_preambleTransMax                   = 10;
+        rach_raResponseWindowSize               = 10;
+        rach_macContentionResolutionTimer       = 48;
+        rach_maxHARQ_Msg3Tx                     = 4;
+
+        pcch_default_PagingCycle                = 128;
+        pcch_nB                                 = "oneT";
+        bcch_modificationPeriodCoeff= 2;
+        ue_TimersAndConstants_t300              = 1000;
+        ue_TimersAndConstants_t301              = 1000;
+        ue_TimersAndConstants_t310              = 1000;
+        ue_TimersAndConstants_t311              = 10000;
+        ue_TimersAndConstants_n310              = 20;
+        ue_TimersAndConstants_n311              = 1;
+        ue_TransmissionMode                     = 1;
+
+        //Parameters for SIB18
+        rxPool_sc_CP_Len                                       = "normal";
+        rxPool_sc_Period                                       = "sf40";
+        rxPool_data_CP_Len                                     = "normal";
+        rxPool_ResourceConfig_prb_Num                          = 20;
+        rxPool_ResourceConfig_prb_Start                        = 5;
+        rxPool_ResourceConfig_prb_End                          = 44;
+        rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+        rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+        rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+        rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+        rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+        rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+        /*
+        rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+        rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+        rxPool_dataHoppingConfig_rbOffset                               = 0;
+        rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+        */
+
+        // Parameters for SIB19
+        discRxPool_cp_Len                                               = "normal"
+        discRxPool_discPeriod                                           = "rf32"
+        discRxPool_numRetx                                              = 1;
+        discRxPool_numRepetition                                        = 2;
+        discRxPool_ResourceConfig_prb_Num                               = 5;
+        discRxPool_ResourceConfig_prb_Start                             = 3;
+        discRxPool_ResourceConfig_prb_End                               = 21;
+        discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+        discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+        discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+        discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+        discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+        discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+      }
+    );
+
+
+    srb1_parameters :
+    {
+      # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+      timer_poll_retransmit    = 80;
+
+      # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+      timer_reordering         = 35;
+
+      # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+      timer_status_prohibit    = 0;
+
+      # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+      poll_pdu                 =  4;
+
+      # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+      poll_byte                =  99999;
+
+      # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+      max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+      # Number of streams to use in input/output
+      SCTP_INSTREAMS  = 2;
+      SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address  = (
+      {
+        ipv4       = "CI_MME_IP_ADDR";
+        ipv6       = "192:168:30::17";
+        active     = "yes";
+        preference = "ipv4";
+      }
+    );
+
+    NETWORK_INTERFACES : {
+      ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
+      ENB_IPV4_ADDRESS_FOR_S1_MME   = "CI_ENB_IP_ADDR";
+      ENB_INTERFACE_NAME_FOR_S1U    = "eth0";
+      ENB_IPV4_ADDRESS_FOR_S1U      = "CI_ENB_IP_ADDR";
+      ENB_PORT_FOR_S1U              = 2152; # Spec 2152
+      ENB_IPV4_ADDRESS_FOR_X2C      = "CI_ENB_IP_ADDR";
+      ENB_PORT_FOR_X2C              = 36422; # Spec 36422
+    };
+  }
+);
+
+log_config = {
+  global_log_level            = "info";
+  global_log_verbosity        = "medium";
+  pdcp_log_level              = "info";
+  pdcp_log_verbosity          = "high";
+  rrc_log_level               = "info";
+  rrc_log_verbosity           = "medium";
+  flexran_agent_log_level     = "info";
+  flexran_agent_log_verbosity = "medium";
+  gtp_log_level               = "info";
+  gtp_log_verbosity           = "medium";
+};
+
+NETWORK_CONTROLLER : {
+  FLEXRAN_ENABLED        = "no";
+  FLEXRAN_INTERFACE_NAME = "lo";
+  FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+  FLEXRAN_PORT           = 2210;
+  FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+  FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/conf_files/cu.band7.tm1.50PRB.conf

+Active_eNBs = ( "eNB-CU-Eurecom-LTEBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs = (
+  {
+    ////////// Identification parameters:
+    eNB_ID    = 0xe00;
+
+    cell_type = "CELL_MACRO_ENB";
+
+    eNB_name  = "eNB-CU-Eurecom-LTEBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } )
+
+    nr_cellid = 12345678L
+
+    tr_s_preference  = "f1"
+
+    local_s_if_name  = "lo";
+    remote_s_address = "127.0.0.3";
+    local_s_address  = "127.0.0.4";
+    local_s_portc    = 501;
+    remote_s_portc   = 500;
+    local_s_portd    = 601;
+    remote_s_portd   = 600;
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+        node_function                           = "3GPP_eNodeB";
+        node_timing                             = "synch_to_ext_device";
+        node_synch_ref                          = 0;
+        frame_type                              = "FDD";
+        tdd_config                              = 3;
+        tdd_config_s                            = 0;
+        prefix_type                             = "NORMAL";
+        eutra_band                              = 7;
+        downlink_frequency                      = 2680000000L;
+        uplink_frequency_offset                 = -120000000;
+        Nid_cell                                = 0;
+        N_RB_DL                                 = 50;
+        pbch_repetition                         = "FALSE";
+        prach_root                              = 0;
+        prach_config_index                      = 0;
+        prach_high_speed                        = "DISABLE";
+        prach_zero_correlation                  = 1;
+        prach_freq_offset                       = 2;
+        pucch_delta_shift                       = 1;
+        pucch_nRB_CQI                           = 0;
+        pucch_nCS_AN                            = 0;
+        pucch_n1_AN                             = 0;
+        pdsch_referenceSignalPower              = -27;
+        pdsch_p_b                               = 0;
+        pusch_n_SB                              = 1;
+        pusch_enable64QAM                       = "DISABLE";
+        pusch_hoppingMode                       = "interSubFrame";
+        pusch_hoppingOffset                     = 0;
+        pusch_groupHoppingEnable                = "ENABLE";
+        pusch_groupAssignment                   = 0;
+        pusch_sequenceHoppingEnabled            = "DISABLE";
+        pusch_nDMRS1                            = 1;
+        phich_duration                          = "NORMAL";
+        phich_resource                          = "ONESIXTH";
+        srs_enable                              = "DISABLE";
+        /*
+        srs_BandwidthConfig                     =;
+        srs_SubframeConfig                      =;
+        srs_ackNackST                           =;
+        srs_MaxUpPts                            =;
+        */
+
+        pusch_p0_Nominal                        = -96;
+        pusch_alpha                             = "AL1";
+        pucch_p0_Nominal                        = -104;
+        msg3_delta_Preamble                     = 6;
+        pucch_deltaF_Format1                    = "deltaF2";
+        pucch_deltaF_Format1b                   = "deltaF3";
+        pucch_deltaF_Format2                    = "deltaF0";
+        pucch_deltaF_Format2a                   = "deltaF0";
+        pucch_deltaF_Format2b                   = "deltaF0";
+
+        rach_numberOfRA_Preambles               = 64;
+        rach_preamblesGroupAConfig              = "DISABLE";
+        /*
+        rach_sizeOfRA_PreamblesGroupA           = ;
+        rach_messageSizeGroupA                  = ;
+        rach_messagePowerOffsetGroupB           = ;
+        */
+        rach_powerRampingStep                   = 4;
+        rach_preambleInitialReceivedTargetPower = -108;
+        rach_preambleTransMax                   = 10;
+        rach_raResponseWindowSize               = 10;
+        rach_macContentionResolutionTimer       = 48;
+        rach_maxHARQ_Msg3Tx                     = 4;
+
+        pcch_default_PagingCycle                = 128;
+        pcch_nB                                 = "oneT";
+        bcch_modificationPeriodCoeff= 2;
+        ue_TimersAndConstants_t300              = 1000;
+        ue_TimersAndConstants_t301              = 1000;
+        ue_TimersAndConstants_t310              = 1000;
+        ue_TimersAndConstants_t311              = 10000;
+        ue_TimersAndConstants_n310              = 20;
+        ue_TimersAndConstants_n311              = 1;
+        ue_TransmissionMode                     = 1;
+
+        //Parameters for SIB18
+        rxPool_sc_CP_Len                                       = "normal";
+        rxPool_sc_Period                                       = "sf40";
+        rxPool_data_CP_Len                                     = "normal";
+        rxPool_ResourceConfig_prb_Num                          = 20;
+        rxPool_ResourceConfig_prb_Start                        = 5;
+        rxPool_ResourceConfig_prb_End                          = 44;
+        rxPool_ResourceConfig_offsetIndicator_present          = "prSmall";
+        rxPool_ResourceConfig_offsetIndicator_choice           = 0;
+        rxPool_ResourceConfig_subframeBitmap_present           = "prBs40";
+        rxPool_ResourceConfig_subframeBitmap_choice_bs_buf              = "00000000000000000000";
+        rxPool_ResourceConfig_subframeBitmap_choice_bs_size             = 5;
+        rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused      = 0;
+        /*
+        rxPool_dataHoppingConfig_hoppingParameter                       = 0;
+        rxPool_dataHoppingConfig_numSubbands                            = "ns1";
+        rxPool_dataHoppingConfig_rbOffset                               = 0;
+        rxPool_commTxResourceUC-ReqAllowed                              = "TRUE";
+        */
+
+        // Parameters for SIB19
+        discRxPool_cp_Len                                               = "normal"
+        discRxPool_discPeriod                                           = "rf32"
+        discRxPool_numRetx                                              = 1;
+        discRxPool_numRepetition                                        = 2;
+        discRxPool_ResourceConfig_prb_Num                               = 5;
+        discRxPool_ResourceConfig_prb_Start                             = 3;
+        discRxPool_ResourceConfig_prb_End                               = 21;
+        discRxPool_ResourceConfig_offsetIndicator_present               = "prSmall";
+        discRxPool_ResourceConfig_offsetIndicator_choice                = 0;
+        discRxPool_ResourceConfig_subframeBitmap_present                = "prBs40";
+        discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf          = "f0ffffffff";
+        discRxPool_ResourceConfig_subframeBitmap_choice_bs_size         = 5;
+        discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused  = 0;
+      }
+    );
+
+
+    srb1_parameters :
+    {
+      # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
+      timer_poll_retransmit    = 80;
+
+      # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
+      timer_reordering         = 35;
+
+      # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
+      timer_status_prohibit    = 0;
+
+      # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
+      poll_pdu                 =  4;
+
+      # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
+      poll_byte                =  99999;
+
+      # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
+      max_retx_threshold       =  4;
+    }
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+      # Number of streams to use in input/output
+      SCTP_INSTREAMS  = 2;
+      SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address  = (
+      {
+        ipv4       = "CI_MME_IP_ADDR";
+        ipv6       = "192:168:30::17";
+        active     = "yes";
+        preference = "ipv4";
+      }
+    );
+
+    NETWORK_INTERFACES : {
+      ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
+      ENB_IPV4_ADDRESS_FOR_S1_MME   = "CI_ENB_IP_ADDR";
+      ENB_INTERFACE_NAME_FOR_S1U    = "eth0";
+      ENB_IPV4_ADDRESS_FOR_S1U      = "CI_ENB_IP_ADDR";
+      ENB_PORT_FOR_S1U              = 2152; # Spec 2152
+      ENB_IPV4_ADDRESS_FOR_X2C      = "CI_ENB_IP_ADDR";
+      ENB_PORT_FOR_X2C              = 36422; # Spec 36422
+    };
+  }
+);
+
+log_config = {
+  global_log_level            = "info";
+  global_log_verbosity        = "medium";
+  pdcp_log_level              = "info";
+  pdcp_log_verbosity          = "high";
+  rrc_log_level               = "info";
+  rrc_log_verbosity           = "medium";
+  flexran_agent_log_level     = "info";
+  flexran_agent_log_verbosity = "medium";
+  gtp_log_level               = "info";
+  gtp_log_verbosity           = "medium";
+};
+
+NETWORK_CONTROLLER : {
+  FLEXRAN_ENABLED        = "no";
+  FLEXRAN_INTERFACE_NAME = "lo";
+  FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+  FLEXRAN_PORT           = 2210;
+  FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+  FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/conf_files/du.band7.tm1.100PRB.usrpb210.conf

+Active_eNBs = ( "eNB-Eurecom-DU");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+  {
+    ////////// Identification parameters:
+    eNB_CU_ID = 0xe00;
+
+    eNB_name  = "eNB-Eurecom-DU";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } )
+
+    nr_cellid = 12345678L
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+        node_function           = "3GPP_eNODEB";
+        node_timing             = "synch_to_ext_device";
+        node_synch_ref          = 0;
+        frame_type              = "FDD";
+        tdd_config              = 3;
+        tdd_config_s            = 0;
+        prefix_type             = "NORMAL";
+        eutra_band              = 7;
+        downlink_frequency      = 2680000000L;
+        uplink_frequency_offset = -120000000;
+        Nid_cell                = 0;
+        N_RB_DL                 = 100;
+        Nid_cell_mbsfn          = 0;
+        nb_antenna_ports        = 1;
+        nb_antennas_tx          = 1;
+        nb_antennas_rx          = 1;
+        tx_gain                 = 90;
+        rx_gain                 = 115;
+
+        pucch_deltaF_Format1    = "deltaF2";
+        pucch_deltaF_Format1b   = "deltaF3";
+        pucch_deltaF_Format2    = "deltaF0";
+        pucch_deltaF_Format2a   = "deltaF0";
+        pucch_deltaF_Format2b   = "deltaF0";
+      }
+    );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+      # Number of streams to use in input/output
+      SCTP_INSTREAMS  = 2;
+      SCTP_OUTSTREAMS = 2;
+    };
+  }
+);
+
+MACRLCs = (
+  {
+    num_cc           = 1;
+    tr_s_preference  = "local_L1";
+    tr_n_preference  = "f1";
+    local_n_if_name  = "lo";
+    remote_n_address = "127.0.0.4";
+    local_n_address  = "127.0.0.3";
+    local_n_portc    = 500;
+    remote_n_portc   = 501;
+    local_n_portd    = 600;
+    remote_n_portd   = 601;
+  }
+);
+
+L1s = (
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs = (
+  {
+    local_rf                      = "yes";
+    nb_tx                         = 1;
+    nb_rx                         = 1;
+    att_tx                        = 10;
+    att_rx                        = 10;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -29;
+    max_rxgain                    = 115;
+    eNB_instances                 = [0];
+  }
+);
+
+log_config = {
+  global_log_level            = "info";
+  global_log_verbosity        = "medium";
+  hw_log_level                = "info";
+  hw_log_verbosity            = "medium";
+  phy_log_level               = "info";
+  phy_log_verbosity           = "medium";
+  mac_log_level               = "info";
+  mac_log_verbosity           = "high";
+  rlc_log_level               = "info";
+  rlc_log_verbosity           = "medium";
+  flexran_agent_log_level     = "info";
+  flexran_agent_log_verbosity = "medium";
+};
+
+NETWORK_CONTROLLER : {
+  FLEXRAN_ENABLED        = "no";
+  FLEXRAN_INTERFACE_NAME = "lo";
+  FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+  FLEXRAN_PORT           = 2210;
+  FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+  FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/conf_files/du.band7.tm1.25PRB.usrpb210.conf

+Active_eNBs = ( "eNB-Eurecom-DU");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+  {
+    ////////// Identification parameters:
+    eNB_CU_ID = 0xe00;
+
+    eNB_name  = "eNB-Eurecom-DU";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } )
+
+    nr_cellid = 12345678L
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+        node_function           = "3GPP_eNODEB";
+        node_timing             = "synch_to_ext_device";
+        node_synch_ref          = 0;
+        frame_type              = "FDD";
+        tdd_config              = 3;
+        tdd_config_s            = 0;
+        prefix_type             = "NORMAL";
+        eutra_band              = 7;
+        downlink_frequency      = 2680000000L;
+        uplink_frequency_offset = -120000000;
+        Nid_cell                = 0;
+        N_RB_DL                 = 25;
+        Nid_cell_mbsfn          = 0;
+        nb_antenna_ports        = 1;
+        nb_antennas_tx          = 1;
+        nb_antennas_rx          = 1;
+        tx_gain                 = 90;
+        rx_gain                 = 125;
+
+        pucch_deltaF_Format1    = "deltaF2";
+        pucch_deltaF_Format1b   = "deltaF3";
+        pucch_deltaF_Format2    = "deltaF0";
+        pucch_deltaF_Format2a   = "deltaF0";
+        pucch_deltaF_Format2b   = "deltaF0";
+      }
+    );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+      # Number of streams to use in input/output
+      SCTP_INSTREAMS  = 2;
+      SCTP_OUTSTREAMS = 2;
+    };
+  }
+);
+
+MACRLCs = (
+  {
+    num_cc           = 1;
+    tr_s_preference  = "local_L1";
+    tr_n_preference  = "f1";
+    local_n_if_name  = "lo";
+    remote_n_address = "127.0.0.4";
+    local_n_address  = "127.0.0.3";
+    local_n_portc    = 500;
+    remote_n_portc   = 501;
+    local_n_portd    = 600;
+    remote_n_portd   = 601;
+  }
+);
+
+L1s = (
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs = (
+  {
+    local_rf                      = "yes";
+    nb_tx                         = 1;
+    nb_rx                         = 1;
+    att_tx                        = 10;
+    att_rx                        = 10;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -25;
+    max_rxgain                    = 125;
+    eNB_instances                 = [0];
+  }
+);
+
+log_config = {
+  global_log_level            = "info";
+  global_log_verbosity        = "medium";
+  hw_log_level                = "info";
+  hw_log_verbosity            = "medium";
+  phy_log_level               = "info";
+  phy_log_verbosity           = "medium";
+  mac_log_level               = "info";
+  mac_log_verbosity           = "high";
+  rlc_log_level               = "info";
+  rlc_log_verbosity           = "medium";
+  flexran_agent_log_level     = "info";
+  flexran_agent_log_verbosity = "medium";
+};
+
+NETWORK_CONTROLLER : {
+  FLEXRAN_ENABLED        = "no";
+  FLEXRAN_INTERFACE_NAME = "lo";
+  FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+  FLEXRAN_PORT           = 2210;
+  FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+  FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/conf_files/du.band7.tm1.50PRB.usrpb210.conf

+Active_eNBs = ( "eNB-Eurecom-DU");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+eNBs =
+(
+  {
+    ////////// Identification parameters:
+    eNB_CU_ID = 0xe00;
+
+    eNB_name  = "eNB-Eurecom-DU";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code = 1;
+    plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } )
+
+    nr_cellid = 12345678L
+
+    ////////// Physical parameters:
+
+    component_carriers = (
+      {
+        node_function           = "3GPP_eNODEB";
+        node_timing             = "synch_to_ext_device";
+        node_synch_ref          = 0;
+        frame_type              = "FDD";
+        tdd_config              = 3;
+        tdd_config_s            = 0;
+        prefix_type             = "NORMAL";
+        eutra_band              = 7;
+        downlink_frequency      = 2680000000L;
+        uplink_frequency_offset = -120000000;
+        Nid_cell                = 0;
+        N_RB_DL                 = 50;
+        Nid_cell_mbsfn          = 0;
+        nb_antenna_ports        = 1;
+        nb_antennas_tx          = 1;
+        nb_antennas_rx          = 1;
+        tx_gain                 = 90;
+        rx_gain                 = 120;
+
+        pucch_deltaF_Format1    = "deltaF2";
+        pucch_deltaF_Format1b   = "deltaF3";
+        pucch_deltaF_Format2    = "deltaF0";
+        pucch_deltaF_Format2a   = "deltaF0";
+        pucch_deltaF_Format2b   = "deltaF0";
+      }
+    );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+      # Number of streams to use in input/output
+      SCTP_INSTREAMS  = 2;
+      SCTP_OUTSTREAMS = 2;
+    };
+  }
+);
+
+MACRLCs = (
+  {
+    num_cc           = 1;
+    tr_s_preference  = "local_L1";
+    tr_n_preference  = "f1";
+    local_n_if_name  = "lo";
+    remote_n_address = "127.0.0.4";
+    local_n_address  = "127.0.0.3";
+    local_n_portc    = 500;
+    remote_n_portc   = 501;
+    local_n_portd    = 600;
+    remote_n_portd   = 601;
+  }
+);
+
+L1s = (
+  {
+    num_cc = 1;
+    tr_n_preference = "local_mac";
+  }
+);
+
+RUs = (
+  {
+    local_rf                      = "yes";
+    nb_tx                         = 1;
+    nb_rx                         = 1;
+    att_tx                        = 10;
+    att_rx                        = 10;
+    bands                         = [7];
+    max_pdschReferenceSignalPower = -27;
+    max_rxgain                    = 120;
+    eNB_instances                 = [0];
+  }
+);
+
+log_config = {
+  global_log_level            = "info";
+  global_log_verbosity        = "medium";
+  hw_log_level                = "info";
+  hw_log_verbosity            = "medium";
+  phy_log_level               = "info";
+  phy_log_verbosity           = "medium";
+  mac_log_level               = "info";
+  mac_log_verbosity           = "high";
+  rlc_log_level               = "info";
+  rlc_log_verbosity           = "medium";
+  flexran_agent_log_level     = "info";
+  flexran_agent_log_verbosity = "medium";
+};
+
+NETWORK_CONTROLLER : {
+  FLEXRAN_ENABLED        = "no";
+  FLEXRAN_INTERFACE_NAME = "lo";
+  FLEXRAN_IPV4_ADDRESS   = "127.0.0.1";
+  FLEXRAN_PORT           = 2210;
+  FLEXRAN_CACHE          = "/mnt/oai_agent_cache";
+  FLEXRAN_AWAIT_RECONF   = "no";
+};

ci-scripts/main.py

@@ -104,6 +104,7 @@ class SSHConnection():
 		self.eNB_instance = ''
 		self.eNBOptions = ''
 		self.rruOptions = ''
+		self.rruLogFile = ''
 		self.ping_args = ''
 		self.ping_packetloss_threshold = ''
 		self.iperf_args = ''
@@ -477,11 +478,11 @@ class SSHConnection():
 			sys.exit('Insufficient Parameter')
 		ci_full_config_file = config_path + '/ci-' + config_file
 		rruCheck = False
-		result = re.search('rru', str(config_file))
+		result = re.search('rru|du', str(config_file))
 		if result is not None:
 			rruCheck = True
 		# do not reset board twice in IF4.5 case
-		result = re.search('rru|enb', str(config_file))
+		result = re.search('rru|enb|du', str(config_file))
 		if result is not None:
 			self.command('echo ' + self.eNBPassword + ' | sudo -S uhd_find_devices', '\$', 5)
 			result = re.search('type: b200', str(self.ssh.before))
@@ -505,6 +506,9 @@ class SSHConnection():
 			self.eNBLogFile = 'enb_' + self.testCase_id + '.log'
 			if extra_options != '':
 				self.eNBOptions = extra_options
+		result = re.search('rru|du', str(config_file))
+		if result is not None:
+			self.rruLogFile = 'enb_' + self.testCase_id + '.log'
 		time.sleep(6)
 		doLoop = True
 		loopCounter = 10
@@ -534,11 +538,11 @@ class SSHConnection():
 						self.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, pcap_log_file, self.eNBSourceCodePath + '/cmake_targets/.')
 				sys.exit(1)
 			else:
-				self.command('stdbuf -o0 cat enb_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync"', '\$', 4)
+				self.command('stdbuf -o0 cat enb_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync|Starting"', '\$', 4)
 				if rruCheck:
 					result = re.search('wait RUs', str(self.ssh.before))
 				else:
-					result = re.search('got sync', str(self.ssh.before))
+					result = re.search('got sync|Starting F1AP at CU', str(self.ssh.before))
 				if result is None:
 					time.sleep(6)
 				else:
@@ -1810,6 +1814,7 @@ class SSHConnection():
 					logStatus = self.AnalyzeLogFile_eNB(self.eNBLogFile)
 					if logStatus < 0:
 						result = logStatus
+					self.eNBLogFile = ''
 			return result
 
 	def CheckOAIUEProcessExist(self, initialize_OAI_UE_flag):
@@ -1929,7 +1934,6 @@ class SSHConnection():
 		msgLine = 0
 		foundSegFault = False
 		foundRealTimeIssue = False
-		rrcSetupRequest = 0
 		rrcSetupComplete = 0
 		rrcReleaseRequest = 0
 		rrcReconfigRequest = 0
@@ -1969,9 +1973,6 @@ class SSHConnection():
 			if foundAssertion and (msgLine < 3):
 				msgLine += 1
 				msgAssertion += str(line)
-			result = re.search('Generating LTE_RRCConnectionSetup', str(line))
-			if result is not None:
-				rrcSetupRequest += 1
 			result = re.search('LTE_RRCConnectionSetupComplete from UE', str(line))
 			if result is not None:
 				rrcSetupComplete += 1
@@ -2009,6 +2010,7 @@ class SSHConnection():
 			if result is not None:
 				rachCanceledProcedure += 1
 		enb_log_file.close()
+		logging.debug('   File analysis completed')
 		if uciStatMsgCount > 0:
 			statMsg = 'eNB showed ' + str(uciStatMsgCount) + ' "uci->stat" message(s)'
 			logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m')
@@ -2021,11 +2023,8 @@ class SSHConnection():
 			statMsg = 'eNB showed ' + str(ulschFailure) + ' "ULSCH in error in round" message(s)'
 			logging.debug('\u001B[1;30;43m ' + statMsg + ' \u001B[0m')
 			self.htmleNBFailureMsg += statMsg + '\n'
-		if rrcSetupRequest > 0 or rrcSetupComplete > 0:
-			rrcMsg = 'eNB requested ' + str(rrcSetupRequest) + ' RRC Connection Setup(s)'
-			logging.debug('\u001B[1;30;43m ' + rrcMsg + ' \u001B[0m')
-			self.htmleNBFailureMsg += rrcMsg + '\n'
-			rrcMsg = ' -- ' + str(rrcSetupComplete) + ' were completed'
+		if rrcSetupComplete > 0:
+			rrcMsg = 'eNB completed ' + str(rrcSetupComplete) + ' RRC Connection Setup(s)'
 			logging.debug('\u001B[1;30;43m ' + rrcMsg + ' \u001B[0m')
 			self.htmleNBFailureMsg += rrcMsg + '\n'
 		if rrcReleaseRequest > 0:
@@ -2264,23 +2263,32 @@ class SSHConnection():
 			self.eNBLogFile = ''
 		else:
 			result = re.search('enb_', str(self.eNBLogFile))
+			analyzeFile = False
 			if result is not None:
-				copyin_res = self.copyin(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, self.eNBSourceCodePath + '/cmake_targets/' + self.eNBLogFile, '.')
+				analyzeFile = True
+				fileToAnalyze = str(self.eNBLogFile)
+				self.eNBLogFile = ''
+			else:
+				result = re.search('enb_', str(self.rruLogFile))
+				if result is not None:
+					analyzeFile = True
+					fileToAnalyze = str(self.rruLogFile)
+					self.rruLogFile = ''
+			if analyzeFile:
+				copyin_res = self.copyin(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, self.eNBSourceCodePath + '/cmake_targets/' + fileToAnalyze, '.')
 				if (copyin_res == -1):
 					logging.debug('\u001B[1;37;41m Could not copy eNB logfile to analyze it! \u001B[0m')
 					self.htmleNBFailureMsg = 'Could not copy eNB logfile to analyze it!'
 					self.CreateHtmlTestRow('N/A', 'KO', ENB_PROCESS_NOLOGFILE_TO_ANALYZE)
-					self.eNBLogFile = ''
 					return
 				logging.debug('\u001B[1m Analyzing eNB logfile \u001B[0m')
-				logStatus = self.AnalyzeLogFile_eNB(self.eNBLogFile)
+				logStatus = self.AnalyzeLogFile_eNB(fileToAnalyze)
 				if (logStatus < 0):
 					self.CreateHtmlTestRow('N/A', 'KO', logStatus)
 					self.CreateHtmlTabFooter(False)
 					sys.exit(1)
 				else:
 					self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
-				self.eNBLogFile = ''
 			else:
 				self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
 

ci-scripts/xml_files/f1_usrp210_band7_test_05mhz.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-f1-05</htmlTabRef>
+	<htmlTabName>Test-F1-CU/DU-05MHz</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<TestCaseRequestedList>
+ 040101
+ 030142 030141 040301 040541 040601 040641 040401 040201 030201 030202
+	</TestCaseRequestedList>
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="030141">
+		<class>Initialize_eNB</class>
+		<desc>Initialize DU (FDD/Band7/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/du.band7.tm1.25PRB.usrpb210.conf</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030142">
+		<class>Initialize_eNB</class>
+		<desc>Initialize CU (FDD/Band7/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/cu.band7.tm1.25PRB.conf</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate CU</desc>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030202">
+		<class>Terminate_eNB</class>
+		<desc>Terminate DU</desc>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+        <testCase id="040301">
+                <class>Attach_UE</class>
+                <desc>Attach UE</desc>
+        </testCase>
+
+        <testCase id="040401">
+                <class>Detach_UE</class>
+                <desc>Detach UE</desc>
+        </testCase>
+
+        <testCase id="040541">
+                <class>Ping</class>
+                <desc>ping (5MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040601">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+	<testCase id="040641">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>60</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/f1_usrp210_band7_test_10mhz.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-f1-10</htmlTabRef>
+	<htmlTabName>Test-F1-CU/DU-10MHz</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<TestCaseRequestedList>
+ 040101
+ 030152 030151 040301 040551 040611 040651 040401 040201 030201 030202
+	</TestCaseRequestedList>
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="030151">
+		<class>Initialize_eNB</class>
+		<desc>Initialize DU (FDD/Band7/10MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/du.band7.tm1.50PRB.usrpb210.conf</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030152">
+		<class>Initialize_eNB</class>
+		<desc>Initialize CU (FDD/Band7/10MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/cu.band7.tm1.50PRB.conf</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate CU</desc>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030202">
+		<class>Terminate_eNB</class>
+		<desc>Terminate DU</desc>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+        <testCase id="040301">
+                <class>Attach_UE</class>
+                <desc>Attach UE</desc>
+        </testCase>
+
+        <testCase id="040401">
+                <class>Detach_UE</class>
+                <desc>Detach UE</desc>
+        </testCase>
+
+        <testCase id="040551">
+                <class>Ping</class>
+                <desc>ping (10MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040611">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - DL/32Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 32M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+	<testCase id="040651">
+		<class>Iperf</class>
+		<desc>iperf (10MHz - UL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>60</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/f1_usrp210_band7_test_20mhz.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-f1-20</htmlTabRef>
+	<htmlTabName>Test-F1-CU/DU-20MHz</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<TestCaseRequestedList>
+ 040101
+ 030162 030161 040301 040561 040621 040661 040401 040201 030201 030202
+	</TestCaseRequestedList>
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="030161">
+		<class>Initialize_eNB</class>
+		<desc>Initialize DU (FDD/Band7/20MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/du.band7.tm1.100PRB.usrpb210.conf</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="030162">
+		<class>Initialize_eNB</class>
+		<desc>Initialize CU (FDD/Band7/20MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/cu.band7.tm1.100PRB.conf</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate CU</desc>
+		<eNB_instance>0</eNB_instance>
+	</testCase>
+
+	<testCase id="030202">
+		<class>Terminate_eNB</class>
+		<desc>Terminate DU</desc>
+		<eNB_instance>1</eNB_instance>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+        <testCase id="040301">
+                <class>Attach_UE</class>
+                <desc>Attach UE</desc>
+        </testCase>
+
+        <testCase id="040401">
+                <class>Detach_UE</class>
+                <desc>Detach UE</desc>
+        </testCase>
+
+        <testCase id="040561">
+                <class>Ping</class>
+                <desc>ping (20MHz - 20 sec)</desc>
+                <ping_args>-c 20</ping_args>
+                <ping_packetloss_threshold>5</ping_packetloss_threshold>
+        </testCase>
+
+        <testCase id="040621">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - DL/70Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 70M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+        </testCase>
+
+	<testCase id="040661">
+		<class>Iperf</class>
+		<desc>iperf (20MHz - UL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>60</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/if4p5_usrp210_band7_test_05mhz.xml

@@ -21,8 +21,8 @@
 
 -->
 <testCaseList>
-	<htmlTabRef>test-05</htmlTabRef>
-	<htmlTabName>Test-05MHz</htmlTabName>
+	<htmlTabRef>test-if4p5-05</htmlTabRef>
+	<htmlTabName>Test-IF4.5-05MHz</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
 	<TestCaseRequestedList>
  040101

ci-scripts/xml_files/if4p5_usrp210_band7_test_10mhz.xml

@@ -21,8 +21,8 @@
 
 -->
 <testCaseList>
-	<htmlTabRef>test-10</htmlTabRef>
-	<htmlTabName>Test-10MHz</htmlTabName>
+	<htmlTabRef>test-if4p5-10</htmlTabRef>
+	<htmlTabName>Test-IF4.5-10MHz</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
 	<TestCaseRequestedList>
  040101

ci-scripts/xml_files/if4p5_usrp210_band7_test_20mhz.xml

@@ -21,8 +21,8 @@
 
 -->
 <testCaseList>
-	<htmlTabRef>test-20</htmlTabRef>
-	<htmlTabName>Test-20MHz</htmlTabName>
+	<htmlTabRef>test-if4p5-20</htmlTabRef>
+	<htmlTabName>Test-IF4.5-20MHz</htmlTabName>
 	<htmlTabIcon>tasks</htmlTabIcon>
 	<TestCaseRequestedList>
  040101