Commit 5a37ef75 authored by Khalid Ahmed's avatar Khalid Ahmed Committed by Thomas Schlichter

removing a duplicate declaration of nr_rx_pdsch

parent 0a57f8e0
......@@ -1112,35 +1112,7 @@ uint32_t dlsch_decoding_emul(PHY_VARS_NR_UE *phy_vars_ue,
PDSCH_t dlsch_id,
uint8_t eNB_id);
/** \brief This function is the top-level entry point to PDSCH demodulation, after frequency-domain transformation and channel estimation. It performs
- RB extraction (signal and channel estimates)
- channel compensation (matched filtering)
- RE extraction (pilot, PBCH, synch. signals)
- antenna combining (MRC, Alamouti, cycling)
- LLR computation
This function supports TM1, 2, 3, 5, and 6.
@param PHY_VARS_NR_UE Pointer to PHY variables
@param type Type of PDSCH (SI_PDSCH,RA_PDSCH,PDSCH,PMCH)
@param eNB_id eNb index (Nid1) 0,1,2
@param eNB_id_i Interfering eNB index (Nid1) 0,1,2, or 3 in case of MU-MIMO IC receiver
@param subframe Subframe number
@param symbol Symbol on which to act (within sub-frame)
@param first_symbol_flag set to 1 on first DLSCH symbol
@param rx_type. rx_type=RX_IC_single_stream will enable interference cancellation of a second stream when decoding the first stream. In case of TM1, 2, 5, and this can cancel interference from a neighbouring cell given by eNB_id_i. In case of TM5, eNB_id_i should be set to n_connected_eNB to perform multi-user interference cancellation. In case of TM3, eNB_id_i should be set to eNB_id to perform co-channel interference cancellation; this option should be used together with an interference cancellation step [...]. In case of TM3, if rx_type=RX_IC_dual_stream, both streams will be decoded by applying the IC single stream receiver twice.
@param i_mod Modulation order of the interfering stream
int32_t nr_rx_pdsch(PHY_VARS_NR_UE *phy_vars_ue,
PDSCH_t type,
uint8_t eNB_id,
uint8_t eNB_id_i,
uint32_t frame,
uint8_t subframe,
uint8_t symbol,
uint8_t first_symbol_flag,
RX_type_t rx_type,
uint8_t i_mod,
uint8_t harq_pid);
*/
int32_t nr_rx_pdcch(PHY_VARS_NR_UE *ue,
uint32_t frame,
uint8_t nr_tti_rx,
......@@ -1778,6 +1750,24 @@ int nr_generate_ue_ul_dlsch_params_from_dci(PHY_VARS_NR_UE *ue,
uint16_t crc_scrambled_values[TOTAL_NBR_SCRAMBLED_VALUES],
NR_DCI_INFO_EXTRACTED_t *nr_dci_info_extracted);
/** \brief This function is the top-level entry point to PDSCH demodulation, after frequency-domain transformation and channel estimation. It performs
- RB extraction (signal and channel estimates)
- channel compensation (matched filtering)
- RE extraction (pilot, PBCH, synch. signals)
- antenna combining (MRC, Alamouti, cycling)
- LLR computation
This function supports TM1, 2, 3, 5, and 6.
@param ue Pointer to PHY variables
@param type Type of PDSCH (SI_PDSCH,RA_PDSCH,PDSCH,PMCH)
@param eNB_id eNb index (Nid1) 0,1,2
@param eNB_id_i Interfering eNB index (Nid1) 0,1,2, or 3 in case of MU-MIMO IC receiver
@param frame Frame number
@param nr_tti_rx Subframe number
@param symbol Symbol on which to act (within sub-frame)
@param first_symbol_flag set to 1 on first DLSCH symbol
@param rx_type. rx_type=RX_IC_single_stream will enable interference cancellation of a second stream when decoding the first stream. In case of TM1, 2, 5, and this can cancel interference from a neighbouring cell given by eNB_id_i. In case of TM5, eNB_id_i should be set to n_connected_eNB to perform multi-user interference cancellation. In case of TM3, eNB_id_i should be set to eNB_id to perform co-channel interference cancellation; this option should be used together with an interference cancellation step [...]. In case of TM3, if rx_type=RX_IC_dual_stream, both streams will be decoded by applying the IC single stream receiver twice.
@param i_mod Modulation order of the interfering stream
*/
int nr_rx_pdsch(PHY_VARS_NR_UE *ue,
PDSCH_t type,
unsigned char eNB_id,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment