oaienv -> ranenv| build_oai -> build_ran

src/MAC/NR_SCD_UE/nr_ue_procedures.c

@@ -3820,7 +3820,7 @@ int nr_ue_process_rar(nr_downlink_indication_t *dl_info, NR_UL_TIME_ALIGNMENT_t
   NR_MAC_RAR *rar          = (NR_MAC_RAR *) (dlsch_buffer + 1);   // RAR subPDU pointer
   uint8_t preamble_index   = ra->ra_PreambleIndex;
 
-  LOG_E(NR_MAC, "In %s:[%d.%d]: [UE %d][RAPROC] invoking MAC for received RAR (current preamble %d)\n", __FUNCTION__, frame, slot, mod_id, preamble_index);
+  LOG_D(NR_MAC, "In %s:[%d.%d]: [UE %d][RAPROC] invoking MAC for received RAR (current preamble %d)\n", __FUNCTION__, frame, slot, mod_id, preamble_index);
 
   while (1) {
     n_subheaders++;
@@ -3839,7 +3839,7 @@ int nr_ue_process_rar(nr_downlink_indication_t *dl_info, NR_UL_TIME_ALIGNMENT_t
       }
     }
     if (rarh->RAPID == preamble_index) {
-      LOG_E(NR_MAC, "[UE %d][RAPROC][%d.%d] Found RAR with the intended RAPID %d\n", mod_id, frame, slot, rarh->RAPID);
+      LOG_D(NR_MAC, "[UE %d][RAPROC][%d.%d] Found RAR with the intended RAPID %d\n", mod_id, frame, slot, rarh->RAPID);
       rar = (NR_MAC_RAR *) (dlsch_buffer + n_subheaders + (n_subPDUs - 1) * sizeof(NR_MAC_RAR));
       ra->RA_RAPID_found = 1;
       if (get_softmodem_params()->emulate_l1) {

src/PHY/SCHED_NR_UE/phy_procedures_nr_ue.c

@@ -1857,7 +1857,7 @@ void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t
       int16_t ra_preamble_rx_power = (int16_t)(prach_resources->ra_PREAMBLE_RECEIVED_TARGET_POWER - pathloss + 30);
       ue->tx_power_dBm[nr_slot_tx] = min(nr_get_Pcmax(mod_id), ra_preamble_rx_power);
 
-      LOG_E(PHY, "In %s: [UE %d][RAPROC][%d.%d]: Generating PRACH Msg1 (preamble %d, PL %d dB, P0_PRACH %d, TARGET_RECEIVED_POWER %d dBm, RA-RNTI %x)\n",
+      LOG_D(PHY, "In %s: [UE %d][RAPROC][%d.%d]: Generating PRACH Msg1 (preamble %d, PL %d dB, P0_PRACH %d, TARGET_RECEIVED_POWER %d dBm, RA-RNTI %x)\n",
         __FUNCTION__,
         mod_id,
         frame_tx,

src/PHY/SIMULATION/NR_UE_PHY/unit_tests/build/run_tests.sh

@@ -147,8 +147,8 @@ then
   then
     echo "cd $OAIENV_DIR"
     cd $OAIENV_DIR
-    echo "source oaienv"
-    source oaienv
+    echo "source ranenv"
+    source ranenv
     echo "cd $WORK_DIR"
     cd $WORK_DIR
     echo "cmake CMakeLists.txt"

src/PHY/SIMULATION/NR_UE_PHY/unit_tests/readme.txt

@@ -26,7 +26,7 @@ This directory contains testbenchs for 5G NR physical layers.
 Before building unit tests, full UE build should be done before (maily for asn1 dependencies):
 
 Initialise environment:
-- under openairinterface5g enter >source oaienv
+- under openairinterface5g enter >source ranenv
 Install tools:
 - under openairinterface5g/cmake_targets/build -I
 Build NR UE:
@@ -49,7 +49,7 @@ input_buffer_test.h: it allows providing samples for pss test.
 How to build & run tests
 ========================
 
-Before building, oai environment should be set by entering under directory openairinterface5g "source oaienv".
+Before building, oai environment should be set by entering under directory openairinterface5g "source ranenv".
 
 A script "run_tests.sh" allows to build, to run and to check all tests.
 To run a complete non regression of unit tests, go under directory NR_UE_PHY/unit_tests/build and execute:

src/cmake_targets/autotests/v2/actions/compilation.bash

 cd /tmp/oai_test_setup/oai
-source oaienv
+source ranenv
 cd cmake_targets
 rm -rf log
 mkdir -p log

src/cmake_targets/autotests/v2/actions/execution.bash

 cd /tmp/oai_test_setup/oai
-source oaienv
+source ranenv
 echo $EXEC $EXEC_ARGS
 $EXEC $EXEC_ARGS

src/cmake_targets/autotests/v2/actions/execution_compile.bash

 cd /tmp/oai_test_setup/oai
-source oaienv
+source ranenv
 sudo rmmod nasmesh || true
 sudo rmmod ue_ip || true
 cd cmake_targets

src/cmake_targets/autotests/v2/actions/run_enb.bash

@@ -2,11 +2,11 @@
 stty isig intr ^C
 
 cd /tmp/oai_test_setup/oai
-source oaienv
+source ranenv
 sudo rmmod nasmesh || true
 sudo rmmod ue_ip || true
 cd cmake_targets/ran_build/build
 ulimit -c unlimited
 sudo rm -f core
 #sudo -E ./lte-softmodem -O $OPENAIR_DIR/cmake_targets/autotests/v2/config/enb.band7.tm1.usrpb210.conf
-sudo -E ./lte-softmodem -O /tmp/enb.conf
+sudo -E ./lte-softmodem -O /tmp/enb.conf
\ No newline at end of file

src/cmake_targets/autotests/v2/actions/start_3276.bash

@@ -2,7 +2,7 @@
 stty isig intr ^C
 
 cd /tmp/oai_test_setup/oai
-source oaienv
+source ranenv
 sudo rmmod nasmesh || true
 sudo rmmod ue_ip || true
 cd cmake_targets/autotests/v2/actions

src/cmake_targets/autotests/v2/actions/start_bandrich.bash

@@ -15,7 +15,7 @@ stty isig intr ^C
 #while [ ! -e /dev/bandrich ]; do sleep 1; done
 
 cd /tmp/oai_test_setup/oai
-source oaienv
+source ranenv
 sudo rmmod nasmesh || true
 sudo rmmod ue_ip || true
 cd cmake_targets/autotests/v2/actions

src/cmake_targets/build_oai → src/cmake_targets/build_ran

@@ -20,7 +20,7 @@
 # *      contact@openairinterface.org
 # */
 
-# file build_oai
+# file build_ran
 # brief OAI automated build tool that can be used to install, compile, run OAI.
 # author  Navid Nikaein, Lionel GAUTHIER, Laurent Thomas
 
@@ -171,10 +171,10 @@ Options
    Print this help
 
 Usage (first build):
- NI/ETTUS B201  + COTS UE : ./build_oai -I -i --eNB -w USRP
+ NI/ETTUS B201  + COTS UE : ./build_ran -I -i --eNB -w USRP
 Usage (regular):
- Eurecom EXMIMO + OAI ENB : ./build_oai --eNB  
- NI/ETTUS B201  + OAI ENB : ./build_oai --eNB -w USRP"
+ Eurecom EXMIMO + RAN ENB : ./build_ran --eNB  
+ NI/ETTUS B201  + RAN ENB : ./build_ran --eNB -w USRP"
 }
 
 

src/common/utils/telnetsrv/DOC/telnetusage.md

@@ -3,7 +3,7 @@ By default the embedded telnet server, which is implemented in a shared library,
 
 ```bash
  cd \<oai repository\>/openairinterface5g
- source oaienv
+ source ranenv
  cd cmake_targets
  ./build_oai  --build-lib telnetsrv
 ```

src/oaienv → src/ranenv

@@ -7,14 +7,14 @@ export OPENAIR_TARGETS=$OPENAIR_HOME/targets
 
 export PATH=$PATH:$OPENAIR_TARGETS/bin
 
-alias  oai='cd $OPENAIR_HOME'
-alias oai0='cd $OPENAIR0_DIR'
-alias oai1='cd $PHY_DIR'
-alias oai2='cd $MAC_DIR'
-alias oait='cd $OPENAIR_TARGETS'
-alias oailte='cd $OPENAIR_TARGETS/RT/USER'
-alias oais='cd $OPENAIR_TARGETS/SIMU/USER'
-alias oaiex='cd $OPENAIR_TARGETS/SIMU/EXAMPLES'
+alias  ran='cd $OPENAIR_HOME'
+alias ran0='cd $OPENAIR0_DIR'
+alias ran1='cd $PHY_DIR'
+alias ran2='cd $MAC_DIR'
+alias rant='cd $OPENAIR_TARGETS'
+alias ranlte='cd $OPENAIR_TARGETS/RT/USER'
+alias rans='cd $OPENAIR_TARGETS/SIMU/USER'
+alias ranex='cd $OPENAIR_TARGETS/SIMU/EXAMPLES'
 
 export IIOD_REMOTE=192.168.1.2
 #export IIOD_REMOTE=192.168.1.11

src/targets/ARCH/ADRV9371_ZC706/SYRTEM_IQ_QuickStart.readme

@@ -58,7 +58,7 @@ sudo gedit /usr/local/etc/syriq/cpu-irq.sh
 echo '1' > /proc/irq/49/smp_affinity_list
 echo '5' > /proc/irq/48/smp_affinity_list
 
-gedit oaienv
+gedit ranenv
 export IIOD_REMOTE=192.168.1.11
 
 
@@ -67,7 +67,7 @@ compilation:
 ------------
 sudo cset shield --reset
 cd eur_oai_develop-nr/openairinterface5g/
-source oaienv
+source ranenv
 
 sudo -E ./cmake_targets/build_oai -c --nrUE -w ADRV9371_ZC706 -I
 sudo -E ./cmake_targets/build_oai -c --nrUE -w ADRV9371_ZC706
@@ -76,7 +76,7 @@ sudo -E ./cmake_targets/build_oai -c --nrUE -w ADRV9371_ZC706
 
 run:
 ----
-source oaienv
+source ranenv
 sudo -E /usr/local/etc/syriq/cpu-irq.sh
 
 sudo -E cset shield -e ./targets/bin/nr-uesoftmodem.Rel15 -- --numerology 1 -r 106 -C 3510000000 --loop-memory --rf-config-file /usr/local/etc/syriq/ue.band22.tm1.PRB100.NR40.dat
@@ -104,7 +104,7 @@ sudo lspci -vv -s 02:00.0 | grep Interr
 sudo gedit /usr/local/etc/syriq/cpu-irq.sh
 echo '1' > /proc/irq/46/smp_affinity_list
 
-gedit oaienv
+gedit ranenv
 export IIOD_REMOTE=192.168.1.21
 
 
@@ -113,7 +113,7 @@ compilation:
 ------------
 sudo cset shield --reset
 cd eur_oai_develop-nr/openairinterface5g/
-source oaienv
+source ranenv
 
 sudo -E ./cmake_targets/build_oai -c --gNB -w ADRV9371_ZC706 -I --enable-cpu-affinity
 
@@ -130,7 +130,7 @@ sudo -E ./cmake_targets/build_oai -c --gNB -w ADRV9371_ZC706 --enable-cpu-affini
 
 run:
 ----
-source oaienv
+source ranenv
 sudo -E /usr/local/etc/syriq/cpu-irq.sh
 
 sudo -E cset shield -e ./targets/bin/nr-softmodem.Rel15 -- -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band22.tm1.106PRB.adrv9371zc706.conf --rf-config-file /usr/local/etc/syriq/gnb.band22.tm1.PRB100.NR40_hwgain15.dat

src/targets/ARCH/tcp_bridge/README.tcp_bridge_oai

@@ -2,7 +2,7 @@ The driver tcp_bridge_oai.c is to be used with the basic simulator.
 
 To build the basic simulator:
     cd [openair top directory]
-    . oaienv
+    . ranenv
     cd cmake_targets
     ./build_oai -I -w USRP
     ./build_oai --basic-simulator

src/targets/DOCS/nfapi-L2-emulator-setup.txt

 
 #Build instructions
-source oaienv
+source ranenv
 cd cmake_targets
 
 #Create lte-uesoftmodem-nos1 (UE) and lte-softmodem-nos1 (eNB) executables