Skip to content

O
OpenXG UE
Commit d42adf2e authored by Raymond Knopp's avatar Raymond Knopp
Browse files
Options

moving of trx_write in eNB_thread_FH to avoit conflicts with trx_read

parent 70e88555
Hide whitespace changes
Inline Side-by-side
Showing with 45 additions and 15 deletions
openair1/SCHED/phy_procedures_lte_eNb.c
View file @ d42adf2e
......@@ -1931,7 +1931,7 @@ void prach_procedures(PHY_VARS_eNB *eNB,uint8_t abstraction_flag)
eNB->UE_stats[(uint32_t)UE_id].UE_timing_offset = preamble_delay_list[preamble_max]&0x1FFF; //limit to 13 (=11+2) bits
eNB->UE_stats[(uint32_t)UE_id].sector = 0;
LOG_D(PHY,"[eNB %d/%d][RAPROC] Frame %d, subframe %d Initiating RA procedure (UE_id %d) with preamble %d, energy %d.%d dB, delay %d\n",
LOG_I(PHY,"[eNB %d/%d][RAPROC] Frame %d, subframe %d Initiating RA procedure (UE_id %d) with preamble %d, energy %d.%d dB, delay %d\n",
eNB->Mod_id,
eNB->CC_id,
frame,
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpb210.conf
View file @ d42adf2e
......@@ -31,7 +31,7 @@ eNBs =
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 50;
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf
View file @ d42adf2e
......@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208";
mobile_network_code = "92";
mobile_network_code = "93";
////////// Physical parameters:
......@@ -34,7 +34,7 @@ eNBs =
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 50;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
......@@ -133,7 +133,7 @@ eNBs =
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
mme_ip_address = ( { ipv4 = "127.0.0.3";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -142,11 +142,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth1";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.147/24";
ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.2/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth1";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.147/24";
ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.4/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
targets/RT/USER/lte-enb.c
View file @ d42adf2e
......@@ -550,6 +550,7 @@ static void* eNB_thread_rxtx( void* param ) {
*/
/*
// eNodeB_3GPP, RRU write to RF device
if ((PHY_vars_eNB_g[0][proc->CC_id]->node_function == eNodeB_3GPP) ||
(PHY_vars_eNB_g[0][proc->CC_id]->node_function == NGFI_RRU_IF4) ||
......@@ -576,13 +577,15 @@ static void* eNB_thread_rxtx( void* param ) {
LOG_E(PHY,"TX : Timeout (sent %d/%d)\n",txs, PHY_vars_eNB_g[0][0]->frame_parms.samples_per_tti);
exit_fun( "problem transmitting samples" );
}
} else if (PHY_vars_eNB_g[0][proc->CC_id]->node_function == eNodeB_3GPP_BBU) {
}
*/
if (PHY_vars_eNB_g[0][proc->CC_id]->node_function == eNodeB_3GPP_BBU) {
/// **** send_IF5 of txdata to RRH **** ///
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_SEND_IF5, 1 );
send_IF5(PHY_vars_eNB_g[0][proc->CC_id], proc->timestamp_tx, proc->subframe_tx, &seqno, IF5_RRH_GW_DL);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_SEND_IF5, 0 );
} else {
} else if (PHY_vars_eNB_g[0][proc->CC_id]->node_function == NGFI_RCC_IF4) {
/// **** send_IF4 of txdataF to RRU **** ///
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_SEND_IF4, 1 );
send_IF4(PHY_vars_eNB_g[0][proc->CC_id], proc->frame_tx, proc->subframe_tx, IF4_PDLFFT, 0);
......@@ -854,8 +857,8 @@ static void* eNB_thread_FH( void* param ) {
eNB_proc_t *proc = (eNB_proc_t*)param;
PHY_VARS_eNB *eNB = PHY_vars_eNB_g[0][proc->CC_id];
LTE_DL_FRAME_PARMS *fp = &eNB->frame_parms;
void *rxp[fp->nb_antennas_rx];
unsigned int rxs;
void *rxp[fp->nb_antennas_rx],*txp[fp->nb_antennas_tx];
unsigned int rxs,txs;
FILE *rx_time_file = NULL;
char rx_time_name[101];
struct timespec wait;
......@@ -1055,7 +1058,34 @@ static void* eNB_thread_FH( void* param ) {
((eNB->node_function == NGFI_RRU_IF4) ||
(eNB->node_function == NGFI_RRU_IF5) ||
(eNB->node_function == eNodeB_3GPP))) { // acquisition from RF
if (proc->first_rx==0) {
// Transmit TX buffer based on timestamp from RX
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_TST, (proc->timestamp_rx+(3*fp->samples_per_tti)-openair0_cfg[0].tx_sample_advance)&0xffffffff );
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 1 );
// prepare tx buffer pointers
for (i=0; i<PHY_vars_eNB_g[0][0]->frame_parms.nb_antennas_tx; i++)
txp[i] = (void*)&PHY_vars_eNB_g[0][0]->common_vars.txdata[0][i][((proc->subframe_rx+3)%10)*fp->samples_per_tti];
txs = PHY_vars_eNB_g[0][proc->CC_id]->rfdevice.trx_write_func(&PHY_vars_eNB_g[0][proc->CC_id]->rfdevice,
proc->timestamp_rx+(3*fp->samples_per_tti)-openair0_cfg[0].tx_sample_advance,
txp,
fp->samples_per_tti,
fp->nb_antennas_tx,
1);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0 );
if (txs != PHY_vars_eNB_g[0][0]->frame_parms.samples_per_tti) {
LOG_E(PHY,"TX : Timeout (sent %d/%d)\n",txs, fp->samples_per_tti);
exit_fun( "problem transmitting samples" );
}
}
for (i=0; i<fp->nb_antennas_rx; i++)
rxp[i] = (void*)&eNB->common_vars.rxdata[0][i][subframe*fp->samples_per_tti];
......
targets/RT/USER/lte-softmodem.c
View file @ d42adf2e
......@@ -525,8 +525,8 @@ static void *scope_thread(void *arg)
ue_cnt=0;
for(UE_id=0; UE_id<NUMBER_OF_UE_MAX; UE_id++) {
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
if ((PHY_vars_eNB_g[0][CC_id]->dlsch[UE_id][0]->rnti>0) && (ue_cnt<scope_enb_num_ue)) {
//if ((ue_cnt<scope_enb_num_ue)) {
// if ((PHY_vars_eNB_g[0][CC_id]->dlsch[UE_id][0]->rnti>0) && (ue_cnt<scope_enb_num_ue)) {
if ((ue_cnt<scope_enb_num_ue)) {
phy_scope_eNB(form_enb[CC_id][ue_cnt],
PHY_vars_eNB_g[0][CC_id],
UE_id);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment