resetting two files to their state in develop

targets/ARCH/EXMIMO/USERSPACE/OCTAVE/txsig.m

-fc  = 2655000000;
+fc  = 2560000000
 %fc  = 1907600000;
 %fc = 859.5e6;
 
@@ -8,9 +8,9 @@ eNB_flag = 0;
 card = 0;
 active_rf = [1 0 0 0];
 autocal = [1 1 1 1];
-resampling_factor = [0 0 0 0];
+resampling_factor = [2 2 2 2];
 limeparms;
-rf_mode   = (RXEN+TXEN+TXLPFNORM+TXLPFEN+TXLPF10+RXLPFNORM+RXLPFEN+RXLPF10+LNA1ON+LNAMax+RFBBNORM) * active_rf;
+rf_mode   = (RXEN+TXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAMax+RFBBNORM) * active_rf;
 rf_mode = rf_mode + (DMAMODE_RX + DMAMODE_TX)*active_rf;
 %rf_mode = rf_mode + (DMAMODE_TX)*active_rf + DMAMODE_RX*active_rf;
 %rf_mode   = RXEN+TXEN+TXLPFNORM+TXLPFEN+TXLPF25+RXLPFNORM+RXLPFEN+RXLPF25+LNA1ON+LNAByp+RFBBLNA1;
@@ -56,10 +56,10 @@ case 0
   s(:,4) = amp * ones(1,length);
 
 case 1
-  s(:,1) = floor(amp * (exp(1i*2*pi*(0:((length)-1))/256)));
-  s(:,2) = floor(amp * (exp(1i*2*pi*(0:((length)-1))/256)));
-  s(:,3) = floor(amp * (exp(1i*2*pi*(0:((length)-1))/256)));
-  s(:,4) = floor(amp * (exp(1i*2*pi*(0:((length)-1))/256)));
+  s(:,1) = floor(amp * (exp(1i*2*pi*(0:((length)-1))/4)));
+  s(:,2) = floor(amp * (exp(1i*2*pi*(0:((length)-1))/4)));
+  s(:,3) = floor(amp * (exp(1i*2*pi*(0:((length)-1))/4)));
+  s(:,4) = floor(amp * (exp(1i*2*pi*(0:((length)-1))/4)));
 
 case 2
   s(38400+128,1)= 80-1j*40;

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf

@@ -34,12 +34,12 @@ eNBs =
         downlink_frequency      			      = 2680000000L;
         uplink_frequency_offset 			      = -120000000;
         Nid_cell					      = 0;
-        N_RB_DL                 			      = 50;
+        N_RB_DL                 			      = 25;
         Nid_cell_mbsfn          			      = 0;
         nb_antenna_ports          			      = 1;
         nb_antennas_tx          			      = 1;
         nb_antennas_rx          			      = 1;
-        tx_gain                                            = 0;
+        tx_gain                                            = 25;
         rx_gain                                            = 20;
         prach_root              			      = 0;
         prach_config_index      			      = 0;