Conflicts:
	executables/nr-gnb.c
	openair1/PHY/NR_REFSIG/nr_dmrs_rx.c
	openair1/SIMULATION/NR_PHY/ulsim.c

 - gNB now only sends samples to USRP when DL slot. (should do the same for UE)
 - increased sf_ahead to 6
 - fixed timestamp for usrp_write at UE

- added nr_is_ssb_slot function

- start_rb was set to 30, and nb_rb was set to 50 with NB_RB_DL = 106.
- When the DC subcarrier is included in the RB allocation,
  this causes errors in FFT/IFFT operations arounf the DC subcarrier
- This leads to errors in unscrambling and decoding

- TBS calculation was performed 2 times. Once in "phy_procedures_nrUE_TX" and
  another in "nr_ue_ulsch_procedures". The TBS calculation was wrong in "phy_procedures_nrUE_TX"
  and correct in "nr_ue_ulsch_procedures".

- The data generation was performed in "phy_procedures_nrUE_TX" with a wrongly
  calculated TBS because "ulsch_ue->nb_re_dmrs" wasn't set to a value, so the calculated
  TBS would be more than it should be. This doesn't create a problem in the test because
  the comparison between the TX and RX data is made using the correctly calculated TBS
  which is smaller.

- Solution was to perform data generation in "nr_ue_ulsch_procedures", and remove TBS calculation
  in "phy_procedures_nrUE_TX"

- removing "Nsymb_pusch" and "Nsc_pusch" from "NR_UE_ULSCH_t"
- using "number_of_symbols" from "NR_UL_UE_HARQ_t" instead
- removing "generate_ue_ulsch_params"

- initialize PUSCH parameters properly

- initialize p_decParams->Z from harq_process not only in round 0
- do not set opp_enabled=1, this crashes in LDPC encoder

Added the following folder:
- ../openair1/PHY/NR_ESTIMATION/

Added the following file to CMakelists.txt:
- ../openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c

Added the following functions:
- nr_pusch_dmrs_rx
- nr_gold_pusch
- nr_ulsch_channel_level
- nr_ulsch_channel_compensation
- nr_ulsch_scale_channel is commented out (I think only used for downlink)

Changes from Khalid Ahmed Mahmoud Mohamed:
- nr_pusch_channel_estimation is used
- nr_ulsch_scale_channel is used
- nr_ulsch_channel_level is used
- nr_ulsch_channel_compensation is used
- multiple logging options for channel and signal magnitude

- removed gNB RT from "ru_procedures.c" to "nr_ru_procedures"
- added a new thread "nr_feprx_thread"
- added some functionalities for fep for rx in "nr_ru_procedures.c"

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

fix on dot_product64

See merge request oai/openairinterface5g!684

Merge branch 'develop-nr_cppcheck' of https://gitlab.eurecom.fr/oai/openairinterface5g into develop-nr_cppcheck