build_helper

#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */

# file build_helper
# brief
# authors Laurent Thomas, Lionel GAUTHIER
#
#######################################
if [ ! -f /etc/os-release ]; then
  echo "No /etc/os-release file found. You're likely on an unsupported distro."
  exit -1
fi
OS_DISTRO=$(grep "^ID=" /etc/os-release | sed "s/ID=//" | sed "s/\"//g")
OS_RELEASE=$(grep "^VERSION_ID=" /etc/os-release | sed "s/VERSION_ID=//" | sed "s/\"//g")
case "$OS_DISTRO" in
  fedora) OS_BASEDISTRO="fedora"; INSTALLER="dnf"; CMAKE="cmake" ;;
  rhel)   OS_BASEDISTRO="fedora"; INSTALLER="yum --skip-broken"; CMAKE="cmake3" ;;
  centos) OS_BASEDISTRO="fedora"; INSTALLER="yum --skip-broken"; CMAKE="cmake3" ;;
  debian) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
  ubuntu) OS_BASEDISTRO="debian"; INSTALLER="apt-get"; CMAKE="cmake" ;;
esac
KERNEL_VERSION=$(uname -r | cut -d '.' -f1)
KERNEL_MAJOR=$(uname -r | cut -d '.' -f2)

#check if we run inside a container
IS_CONTAINER=`egrep -c "docker|podman|kubepods|libpod|buildah" /proc/self/cgroup || true`
#sudo is not needed when we are root
if [ "$UID" = 0 ]
then
  SUDO=''
else
  SUDO='sudo -S -E'
fi

###############################
## echo and  family
###############################
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
blue='\E[1;34m'
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
COLORIZE=1

cecho()  {
    # Color-echo
    # arg1 = message
    # arg2 = color
    local default_msg="No Message."
    message=${1:-$default_msg}
    color=${2:-$green}
    [ "$COLORIZE" = "1" ] && message="$color$message$reset_color"
    echo -e "$message"
    return
}

echo_error()   { cecho "$*" $red          ;}
echo_fatal()   { cecho "$*" $red; exit -1 ;}
echo_warning() { cecho "$*" $yellow       ;}
echo_success() { cecho "$*" $green        ;}
echo_info()    { cecho "$*" $blue         ;}

########################
# distribution helpers #
########################

# This function return a string to identify the distribution we are running
# If we can't check the distribution, it returns "Unknown"
# This function return always true as exit code by design
# Examples:
#   ubuntu16.04
#   debian8.5
get_distribution_release() {
    if [[ ! -z "$OS_DISTRO$OS_RELEASE" ]]; then
        echo "$OS_DISTRO$OS_RELEASE"
    else
        echo Unknown
    fi
}

check_supported_distribution() {
    local distribution=$(get_distribution_release)
    case "$distribution" in
        "ubuntu18.04") return 0 ;;
        "ubuntu17.10") return 0 ;;
        "ubuntu17.04") return 0 ;;
        "ubuntu16.04") return 0 ;;
        "ubuntu14.04") return 0 ;;
        "fedora24")    return 0 ;;
        "rhel7")       return 0 ;;
        "rhel7.6")     return 0 ;;
        "rhel7.7")     return 0 ;;
        "rhel7.8")     return 0 ;;
        "rhel7.9")     return 0 ;;
        "rhel8.2")     return 0 ;;
        "rhel8.3")     return 0 ;;
        "rhel8.4")     return 0 ;;
        "rhel8.5")     return 0 ;;
        "rhel8.6")     return 0 ;;
        "rhel8.7")     return 0 ;;
        "centos7")     return 0 ;;
    esac
    return 1
}

##################
# Error handlers #
##################

handler_EXIT() {
	local exit_code=$?
    [ "$exit_code" -eq 0 ] || echo_error "build have failed"
	exit $exit_code
}

trap handler_EXIT EXIT

###########################
# Cleaners
###########################

clean_kernel() {
    $SUDO modprobe ip_tables
    $SUDO modprobe x_tables
    $SUDO iptables -P INPUT ACCEPT
    $SUDO iptables -F INPUT
    $SUDO iptables -P OUTPUT ACCEPT
    $SUDO iptables -F OUTPUT
    $SUDO iptables -P FORWARD ACCEPT
    $SUDO iptables -F FORWARD
    $SUDO iptables -t nat -F
    $SUDO iptables -t mangle -F
    $SUDO iptables -t filter -F
    $SUDO iptables -t raw -F
    echo_info "Flushed iptables"
    $SUDO rmmod nasmesh > /dev/null 2>&1
    $SUDO rmmod oai_nw_drv  > /dev/null 2>&1
    $SUDO rmmod openair_rf > /dev/null 2>&1
    $SUDO rmmod ue_ip > /dev/null 2>&1
    echo_info "removed drivers from kernel"
}

clean_all_files() {
 set_openair_env
 dir=$OPENAIR_DIR/cmake_targets
 rm -rf $dir/log $OPENAIR_DIR/targets/bin/*
 rm -rf $dir/ran_build $dir/ran_build_noLOG
 rm -rf $dir/lte-simulators/build 
 rm -rf $dir/phy_simulators/build $dir/nas_sim_tools/build 
 rm -rf $dir/oaisim_build_oai/build $dir/oaisim_build_oai/CMakeLists.txt
 rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build
}

###################################
# Compilers
###################################

#check_warnings:
#    print error message if the compilation had warnings
#argument:
#    $1: log file
check_warnings() {
  #we look for 'warning:' in the compilation log file
  #this is how gcc starts a warning
  #this is not perfect, we may get false positive
  warning_count=`grep "warning:" "$1" | egrep -v "jobserver unavailable|disabling jobserver mode" | wc -l`
  if [ $warning_count -gt 0 ]; then
    echo_error "WARNING: $warning_count warnings. See $1"
  fi
}

#check_errors:
#    print error message if the compilation had errors
#argument:
#    $1: log file
check_errors() {
  #we look for 'warning:' in the compilation log file
  error_count=`grep "error:" "$1" | wc -l`
  if [ $error_count -gt 0 ]; then
    echo_error "ERROR: $error_count error. See $1"
  fi
}

compilations() {
  cd $OPENAIR_DIR/cmake_targets/$1/build
  echo_info "Log file for compilation is being written to: $dlog/$2.$REL.txt"
  set +e
  {
    if [ "$BUILD_COVERITY_SCAN" == "1" ]; then
        COV_SCAN_PREFIX="cov-build --dir cov-int"
    else
        COV_SCAN_PREFIX=""
    fi
    if [ "$MAKE_CMD" != "" ]; then
       $MAKE_CMD $2
    else 
    if [ "$VERBOSE_COMPILE" == "1" ]; then
       $COV_SCAN_PREFIX make -j`nproc` $2 VERBOSE=$VERBOSE_COMPILE
    else
       $COV_SCAN_PREFIX make -j`nproc` $2
    fi
    fi
    ret=$?
  } > $dlog/$2.$REL.txt 2>&1
  set -e
  if [ "$VERBOSE_CI" == "1" ]; then
     echo_info "====== Start of log for $2.$REL.txt ======"
     cat $dlog/$2.$REL.txt
     echo_info "====== End of log for $2.$REL.txt ======"
  fi
  if [[ $ret -ne 0 ]]; then
     check_warnings "$dlog/$2.$REL.txt"
     check_errors "$dlog/$2.$REL.txt"
     echo_error "$2 compilation failed"
     exit 1
  fi
  if [ -s $3 ] ; then
     cp $3 $4
     echo_success "$2 compiled"
     check_warnings "$dlog/$2.$REL.txt"
  else
     check_warnings "$dlog/$2.$REL.txt"
     check_errors "$dlog/$2.$REL.txt"
     echo_error "$2 compilation failed"
     exit 1
  fi
}

############################################
# External packages installers
############################################

install_protobuf_from_source(){
    protobuf_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_install_log.txt
    echo_info "\nInstalling Google Protobuf from sources. The log file for Protobuf installation is here: $protobuf_install_log "
    (
    cd /tmp
    echo "Downloading protobuf"
    #rm -rf /tmp/protobuf-2.6.1.tar.gz* /tmp/protobuf-2.6.1
    #wget https://github.com/protocolbuffers/protobuf/releases/download/v2.6.1/protobuf-2.6.1.tar.gz
    #tar -xzvf protobuf-2.6.1.tar.gz --owner $USER --group $USER --no-same-owner
    #cd protobuf-2.6.1/

    if [ $IS_CONTAINER -eq 0 ]
    then
      rm -rf /tmp/protobuf-cpp-3.3.0.tar.gz* /tmp/protobuf-3.3.0
      wget --tries=3 --retry-connrefused https://github.com/protocolbuffers/protobuf/releases/download/v3.3.0/protobuf-cpp-3.3.0.tar.gz
      tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner $(id -u) --group $(id -g) --no-same-owner
      cd protobuf-3.3.0/
    else
      export LD_LIBRARY_PATH=/usr/local/lib #protoc needs to know where toclook for shared libs
      rm -rf /tmp/protobuf
      git clone --depth=1 --branch=v3.3.0 https://github.com/protocolbuffers/protobuf.git /tmp/protobuf
      cd /tmp/protobuf
      git submodule update --init --recursive
      ./autogen.sh
    fi
    ./configure
    echo "Compiling protobuf"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
    if [[ -v CI_ENV ]]; then
        cd /tmp
        $SUDO rm -rf protobuf*
    fi
    ) >& $protobuf_install_log
}

install_protobuf_c_from_source(){
    protobuf_c_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_c_install_log.txt
    echo_info "\nInstalling Google Protobuf_C from sources. The log file for Protobuf_C installation is here: $protobuf_c_install_log "
    (
    if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
        export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
    fi
    cd /tmp
    echo "Downloading protobuf-c"
    rm -rf /tmp/protobuf-c
    git clone https://github.com/protobuf-c/protobuf-c.git
    cd protobuf-c
	git checkout 2a46af42784abf86804d536f6e0122d47cfeea45
    ./autogen.sh
    ./configure
    echo "Compiling protobuf-c"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
    if [[ -v CI_ENV ]]; then
        cd /tmp
        $SUDO rm -rf protobuf*
    fi
    ) >& $protobuf_c_install_log
}

install_usrp_uhd_driver_from_source(){
    uhd_install_log=$OPENAIR_DIR/cmake_targets/log/uhd_install_log.txt
    echo_info "\nInstalling UHD driver from sources. The log file for UHD driver installation is here: $uhd_install_log "
    (
    pushd /tmp
    echo "Cloning UHD driver repository"
    rm -rf /tmp/uhd
    git clone https://github.com/EttusResearch/uhd.git
    cd uhd
    if [[ -v UHD_VERSION ]]; then
        git checkout tags/v${UHD_VERSION}
    else
        git checkout tags/v4.0.0.0
    fi
    mkdir -p host/build
    cd host/build || true
    $CMAKE ../ -GNinja
    echo "Compiling UHD"
    ninja
    $SUDO ninja install
    $SUDO ldconfig -v
    if [ $IS_CONTAINER -eq 0 ]; then
        if [[ "$OS_DISTRO" == "ubuntu" ]]; then
            $SUDO /usr/local/lib/uhd/utils/uhd_images_downloader.py
        fi
        if [[ "$OS_DISTRO" == "rhel" ]]; then
            $SUDO /usr/local/lib64/uhd/utils/uhd_images_downloader.py
        fi
    fi
    popd
    rm -rf /tmp/uhd
    ) >& $uhd_install_log
}

check_install_usrp_uhd_driver(){
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
        #first we remove old installation
        $SUDO apt-get remove uhd -y || true
        $SUDO apt-get remove uhd-host -y || true
        $SUDO apt-get remove libuhd-dev -y || true
        $SUDO apt-get remove libuhd003 -y || true
        $SUDO apt-get remove libuhd3.13.1 -y || true
        $SUDO apt-get remove libuhd3.14.0 -y || true
        $SUDO apt-get remove libuhd3.14.1 -y || true
        $SUDO apt-get remove libuhd3.15.0 -y || true
        local distribution=$(get_distribution_release)
        if [[ "$distribution" == "ubuntu18.04" ]]; then
            $SUDO apt-get remove libuhd4.0.0 -y || true
            $SUDO apt-get remove libuhd4.1.0 -y || true
        fi
        v=$(lsb_release -cs)
        $SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
        if [[ -v BUILD_UHD_FROM_SOURCE ]]; then
            $SUDO apt-get install -y libboost-all-dev libusb-1.0-0-dev doxygen python3-docutils python3-mako python3-numpy python3-requests python3-setuptools ninja-build
            install_usrp_uhd_driver_from_source
            return
        fi
        # The new USRP repository
        # Raphael Defosseux: Adding a loop on adding PPA because in CI the gpg key retrieve may
        # timeout due to proxy / network latencies in Eurecom on VM
        echo_info "\nAdding PPA repository ettusresearch/uhd\n"
        x=0
        while [ $x -le 5 ]
        do
            if $SUDO add-apt-repository ppa:ettusresearch/uhd -y
            then
                echo_info "add-apt-repository successful\n"
                break
            else
                echo_info "add-apt-repository failed, retrying...\n"
                sleep 30
            fi
            x=$((x + 1))
        done
        $SUDO apt-get update
        $SUDO apt-get -y install  python python-tk libboost-all-dev libusb-1.0-0-dev
        if [[ "$distribution" == "ubuntu16.04" ]]; then
            $SUDO apt-get -y install libuhd-dev libuhd3.15.0 uhd-host
        fi
        if [[ "$distribution" == "ubuntu18.04" ]]; then
            $SUDO apt-get -y install libuhd-dev libuhd4.1.0 uhd-host
        fi
    elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
        if [ $IS_CONTAINER -eq 0 ]
        then
            $SUDO $INSTALLER -y install python boost libusb-devel libusbx-devel boost-devel python-mako python-docutils $CMAKE
            $SUDO -H pip install requests
        else
            $SUDO $INSTALLER -y install boost boost-devel $CMAKE
            $SUDO pip3 install mako requests
        fi
        if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
            if [ $IS_CONTAINER -eq 0 ]
            then
                # until EPEL repo hasn't bumped UHD driver to >=3.10 in EPEL, build driver from source
                $SUDO $INSTALLER -y remove uhd uhd-devel uhd-firmware
            fi
            install_usrp_uhd_driver_from_source
        else
            $SUDO $INSTALLER -y install uhd uhd-devel uhd-firmware
        fi
    fi
}

install_usrp_uhd_driver() {
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
        # We move uhd-host apart because it depends on linux kernel version
        # On newer kernels, it fails to install
        $SUDO apt-get -y install uhd-host
    fi
    # quick workaround for RHE7.6
    local distribution=$(get_distribution_release)
    if [ -z $1 ]; then
      if [[ "$OS_DISTRO" == "rhel" ]]; then
          $SUDO /usr/local/bin/uhd_images_downloader
      else
          $SUDO uhd_images_downloader
      fi
    else
      if [[ "$OS_DISTRO" == "rhel" ]]; then
          $SUDO /usr/local/bin/uhd_images_downloader -i $1
      else
          $SUDO uhd_images_downloader -i $1
      fi
    fi
}

install_bladerf_driver_from_source(){
    bladerf_install_log=$OPENAIR_DIR/cmake_targets/log/bladerf_install_log.txt
    echo_info "\nInstalling BladeRF driver from sources. The log file for BladeRF driver installation is here: $bladerf_install_log "
    (
    cd /tmp
    echo "Downloading BladeRF driver"
    rm -rf /tmp/bladeRF
    git clone https://github.com/Nuand/bladeRF.git
    cd bladeRF
    git checkout tags/2016.06
    mkdir -p build
    cd build
    $CMAKE ../
    echo "Compiling BladeRF driver"
    make
    $SUDO make install
    $SUDO ldconfig
    echo "Downloading FPGA and firmware images"
    cd /tmp/bladeRF
    wget --tries=3 --retry-connrefused https://www.nuand.com/fx3/bladeRF_fw_latest.img
    wget --tries=3 --retry-connrefused https://www.nuand.com/fpga/hostedx40-latest.rbf
    sudo mkdir -p /usr/share/Nuand/bladeRF
    sudo mv bladeRF_fw_latest.img /usr/share/Nuand/bladeRF/bladeRF_fw.img
    sudo mv hostedx40-latest.rbf /usr/share/Nuand/bladeRF/hostedx40.rbf
    ) >& $bladerf_install_log
}

check_install_bladerf_driver(){
    if [[ "$OS_DISTRO" == "ubuntu" ]]; then
        if [ "$(get_distribution_release)" == "ubuntu14.04" ] ; then
            $SUDO add-apt-repository -y ppa:bladerf/bladerf
            $SUDO apt-get update
        fi
        $SUDO apt-get install -y  bladerf libbladerf-dev
        $SUDO apt-get install -y bladerf-firmware-fx3
        $SUDO apt-get install -y bladerf-fpga-hostedx40
   elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
        install_bladerf_driver_from_source
   else
        echo_error "BladeRF Installer for OAI does not support automatic build. Install BladeRF compiling sources manually from BladeRF website"
   fi
}

flash_firmware_bladerf() {
	$SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
}

check_install_lmssdr_driver(){
	if ( [ -d "/usr/local/include/lime" ] &&
             [ -f "/usr/local/include/lime/LimeSuite.h" ] )
	then
  		echo_success "Found lmssdr drivers and tools installed from source"
        else
                echo_error "lmssdr support implies installing lmssdr drivers and tools" \
                           " from sources. check:"
                echo_info "https://wiki.myriadrf.org/Lime_Suite"
                echo_fatal "Cannot compile lmssdr device"
	fi


}

install_soapy_from_source(){
    soapy_install_log=$OPENAIR_DIR/cmake_targets/log/soapy_install_log.txt
    echo_info "\nInstalling Soapy EcoSystem from source. The log file for Soapy installation is here: $soapy_install_log "
    (
    cd /tmp
    echo "Downloading SoapySDR"
    rm -rf /tmp/soapysdr
    git clone -b soapy-sdr-0.7.0 --single-branch https://github.com/pothosware/SoapySDR.git
    cd SoapySDR
    #git checkout tags/release_003_010_001_001
    mkdir -p build
    cd build
    $CMAKE ../
    echo "Compiling SoapySDR"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
    cd /tmp
    echo "Downloading SoapyRemote"
    rm -rf /tmp/soapyremote
    git clone -b soapy-remote-0.5.0 --single-branch https://github.com/pothosware/SoapyRemote.git
    cd SoapyRemote
    #git checkout tags/release_003_010_001_001
    mkdir -p build
    cd build
    $CMAKE ../
    echo "Compiling SoapyRemote"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
    ) >& $soapy_install_log
}

install_soapy_iris_from_source(){
    iris_install_log=$OPENAIR_DIR/cmake_targets/log/iris_install_log.txt
    echo_info "\nInstalling Iris driver from source. The log file for Iris driver installation is here: $iris_install_log "
    (
    cd /tmp
    echo "Downloading SoapyIris"
    rm -rf /tmp/sklk-soapyiris
    git clone -b soapy-iris-2018.08.0.1 --single-branch https://github.com/skylarkwireless/sklk-soapyiris.git
    cd sklk-soapyiris
    mkdir -p build
    cd build
    $CMAKE ../
    echo "Compiling SoapyIris"
    make -j`nproc`
    $SUDO make install
    $SUDO ldconfig
    ) >& $iris_install_log
}

check_install_soapy () {
    #if [[ "$OS_DISTRO" == "ubuntu" ]]; then
        #first we remove old installation
    $SUDO apt-get remove -y soapysdr soapysdr-server libsoapysdr-dev python-soapysdr python3-soapysdr soapysdr-module-remote || true
        #$SUDO add-apt-repository -y ppa:myriadrf/drivers
        #$SUDO apt-get update
        #$SUDO apt-get install -y soapysdr soapysdr-server libsoapysdr-dev python-soapysdr python3-soapysdr soapysdr-module-remote

    #elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
    #    $SUDO $INSTALLER -y install software-properties-common python3-software-properties python-software-properties subversion git python3 python-numpy python3-numpy cmake swig python-dev
    install_soapy_from_source
    #fi
    install_soapy_iris_from_source

}

check_install_additional_tools (){
  $SUDO $INSTALLER update -y
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
    PACKAGE_LIST="\
	check \
	dialog \
	dkms \
	gawk \
	libboost-all-dev \
	libpthread-stubs0-dev \
	openvpn \
	pkg-config \
	python-dev  \
	python-pexpect \
	sshfs \
	swig  \
	tshark \
	uml-utilities \
	unzip  \
	valgrind  \
	vlan	  \
	ctags \
        ntpdate \
        iperf3 \
        android-tools-adb \
	wvdial \
        python-numpy \
        sshpass \
        nscd \
        bc \
        ntp \
        python-scipy \
        python-matplotlib"
  elif [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
    PACKAGE_LIST="\
      check \
      dialog \
      dkms \
      gawk \
      boost-devel \
      openvpn \
      pkgconfig \
      pexpect \
      sshfs \
      swig  \
      wireshark \
      unzip  \
      valgrind  \
      vconfig	  \
      ctags \
      ntpdate \
      iperf3 \
      wvdial \
      numpy \
      sshpass \
      nscd \
      python2-paramiko \
      python-pyroute2 \
      python-netifaces \
      scipy \
      python-matplotlib"
  elif [[ "$OS_DISTRO" == "fedora" ]]; then
    PACKAGE_LIST=" \
      check \
      dialog \
      dkms \
      gawk \
      boost-devel \
      openvpn \
      pkgconfig \
      python-pexpect \
      sshfs \
      swig  \
      wireshark \
      unzip  \
      valgrind  \
      vconfig	  \
      ctags \
      ntpdate \
      iperf3 \
      wvdial \
      python-numpy \
      sshpass \
      nscd \
      python2-paramiko \
      python-pyroute2 \
      python-netifaces \
      python2-scipy \
      python2-matplotlib"
  fi
    $SUDO $INSTALLER install -y $PACKAGE_LIST

    $SUDO rm -fr /opt/ssh
    $SUDO GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/ssh.git /opt/ssh

  #The packages below are already installed for Redhat distros (RHEL, CentOS, Fedora)
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
    $SUDO -H pip install paramiko
    $SUDO -H pip install pyroute2 colorama
    log_netiface=$OPENAIR_DIR/cmake_targets/log/netiface_install_log.txt
    echo_info "Installing Netinterfaces package. The logfile for installation is in $log_netiface"
    (
    $SUDO rm -fr /tmp/netifaces-0.10.4.tar.gz /tmp/netifaces
    wget --tries=3 --retry-connrefused -P /tmp  https://pypi.python.org/packages/18/fa/dd13d4910aea339c0bb87d2b3838d8fd923c11869b1f6e741dbd0ff3bc00/netifaces-0.10.4.tar.gz
    tar -xzvf /tmp/netifaces-0.10.4.tar.gz -C /tmp
    cd /tmp/netifaces-0.10.4
    $SUDO python setup.py install
    cd -
    ) >& $log_netiface
  fi
}

check_install_oai_software() {
    local specific_packages=""
    if ! check_supported_distribution; then
        echo_error "Your distribution $(get_distribution_release) is not supported by oai !"
        exit 1
    fi
    $SUDO $INSTALLER update -y
  if [[ "$OS_DISTRO" == "ubuntu" ]]; then
    local LAPACK_LIBNAME="liblapack.so"
    local LAPACK_TARGET="/usr/lib/atlas-base/atlas/liblapack.so"
    $SUDO apt install -y software-properties-common
    case "$(get_distribution_release)" in
        "ubuntu14.04")
            specific_packages="libtasn1-3-dev libgnutls-dev libatlas-dev iproute libconfig8-dev"
            # For iperf3
            $SUDO add-apt-repository "deb http://archive.ubuntu.com/ubuntu trusty-backports universe"
            $SUDO apt-get update
            ;;
        "ubuntu16.04")
            specific_packages="libtasn1-6-dev libgnutls-dev libatlas-dev iproute libconfig8-dev"
            ;;
        "ubuntu17.04")
            specific_packages="libtasn1-6-dev libgnutls28-dev libatlas-dev iproute libconfig8-dev"
            ;;
        "ubuntu17.10")
            specific_packages="libtasn1-6-dev libgnutls28-dev iproute libconfig8-dev"
            LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
            LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
            ;;
        "ubuntu18.04")
            specific_packages="libtasn1-6-dev libgnutls28-dev iproute2 libconfig-dev"
            LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
            LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
            ;;
    esac
    $SUDO apt-get install -y \
    $specific_packages \
	autoconf  \
	automake  \
	bison  \
	build-essential \
	$CMAKE \
	cmake-curses-gui  \
	curl \
        ninja-build \
	doxygen \
	doxygen-gui \
	texlive-latex-base \
	ethtool \
	flex  \
	gdb  \
	git \
	graphviz \
	gtkwave \
	guile-2.0-dev  \
	iperf \
	iptables \
	iptables-dev \
	libatlas-base-dev \
	libblas-dev \
  liblapack-dev\
  liblapacke-dev\
	libffi-dev \
	libforms-bin \
	libforms-dev \
	libgcrypt11-dev \
	libgmp-dev \
	libgtk-3-dev \
	libidn2-0-dev  \
	libidn11-dev \
	libmysqlclient-dev  \
	libpython2.7-dev \
	libsctp1  \
	libsctp-dev  \
	libssl-dev  \
	libtool  \
	libusb-1.0-0-dev \
	libxml2 \
	libxml2-dev  \
	libxslt1-dev \
	mscgen  \
	octave-signal \
	openssh-client \
	openssh-server \
	openssl \
	python  \
	subversion \
	xmlstarlet \
	python-pip \
	pydb \
	libyaml-dev \
	wget \
	libxpm-dev \
        libboost-all-dev

    $SUDO update-alternatives --set "$LAPACK_LIBNAME" "$LAPACK_TARGET"

    $SUDO apt-get install -y nettle-dev nettle-bin
  elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
    if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
      if rpm -q epel-release > /dev/null; then
        echo "EPEL repos already present. Good."
      else
        echo "EPEL repos not present. Installing them."
        $SUDO $INSTALLER install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
      fi
      $SUDO $INSTALLER install -y python-epdb vim-common
    else
      $SUDO $INSTALLER install -y mscgen pydb
    fi

    $SUDO $INSTALLER install -y \
      autoconf \
      automake \
      bc \
      bison \
      $CMAKE \
      doxygen \
      ethtool \
      flex \
      gdb \
      git \
      graphviz \
      gtkwave \
      guile-devel \
      iperf \
      iproute \
      iptables \
      iptables-devel \
      atlas-devel \
      blas-devel \
      libconfig-devel \
      libffi-devel \
      xforms \
      xforms-devel \
      libgcrypt-devel \
      gmp-devel \
      gtk3-devel \
      libidn2-devel  \
      libidn-devel \
      mariadb-devel \
      lksctp-tools \
      lksctp-tools-devel \
      openssl-devel \
      libtasn1 \
      libtool \
      libusb-devel \
      libxml2 \
      libxml2-devel \
      libxslt-devel \
      ninja-build \
      make \
      openssh-clients \
      openssh-server \
      openssl \
      patch \
      psmisc \
      python \
      subversion \
      xmlstarlet \
      python-pip \
      wget \
      kernel-headers \
      kernel-devel \
      nettle-devel \
      gnutls-devel \
      libXpm-devel \
      lapack \
      lapack-devel \
      blas \
      blas-devel \
      libyaml-devel
  fi

    install_asn1c_from_source $1
    $SUDO rm -fr /opt/ssh
    $SUDO git clone https://gist.github.com/2190472.git /opt/ssh
}

install_asn1c_from_source(){
    asn1_install_log=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
    echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
    (
    $SUDO rm -rf /tmp/asn1c
    # GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
    git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
    cd /tmp/asn1c
    # better to use a given commit than a branch in case the branch
    # is updated and requires modifications in the source of OAI
    #git checkout velichkov_s1ap_plus_option_group
    git checkout f12568d617dbf48497588f8e227d70388fa217c9
    autoreconf -iv
    ./configure
    make -j`nproc`
    $SUDO make install
    cd -
    $SUDO ldconfig
    if [[ -v CI_ENV ]]; then
        $SUDO rm -rf /tmp/asn1c
    fi
    ) > $asn1_install_log 2>&1
}

#################################################
# 2. compile
################################################

install_nas_tools() {
  echo_success "generate .ue_emm.nvram .ue.nvram"
  ./nvram --gen -c $1 -o $2 > "$3"
  echo_success "generate .usim.nvram"
  ./usim --gen -c $1 -o $2 >> "$3"
}


################################
# set_openair_env
###############################
set_openair_env(){
    fullpath=`readlink -f $BASH_SOURCE`
    [ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
    openair_path=${fullpath%/cmake_targets/*}
    openair_path=${openair_path%/targets/*}
    openair_path=${openair_path%/openair[123]/*}
    export OPENAIR_DIR=$openair_path
    export OPENAIR1_DIR=$openair_path/openair1
    export OPENAIR2_DIR=$openair_path/openair2
    export OPENAIR3_DIR=$openair_path/openair3
    export OPENAIR_TARGETS=$openair_path/targets
}

################################
# Function to killall the subprocesses when Ctrl-C Key is hit
###############################
function handle_ctrl_c(){
CURPID=$$
ppid=$$
arraycounter=1
echo_info "** Trapped CTRL-C. Killing all subprocesses now..."
echo_info "** Calling sync now..."
sync
while true
do
        FORLOOP=FALSE
        # Get all the child process id
        for i in `ps -ef| awk '$3 == '$ppid' { print $2 }'`
        do
                if [ $i -ne $CURPID ] ; then
                        procid[$arraycounter]=$i
                        arraycounter=`expr $arraycounter + 1`
                        ppid=$i
                        FORLOOP=TRUE
                fi
        done
        if [ "$FORLOOP" = "FALSE" ] ; then
           arraycounter=`expr $arraycounter - 1`
           ## We want to kill child process id first and then parent id's
           while [ $arraycounter -ne 0 ]
           do
             echo "first we send ctrl-c to program"
             $SUDO kill -INT "${procid[$arraycounter]}"
             sleep 5
             echo "Now we force kill if that didn't work"
             $SUDO kill -9 "${procid[$arraycounter]}" >/dev/null
             arraycounter=`expr $arraycounter - 1`
           done
         exit
        fi
done
}


# get from http://www.linuxjournal.com/content/validating-ip-address-bash-script
validate_ip() {

local  ip=$1
local  stat=1

if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
    OIFS=$IFS
    IFS='.'
    ip=($ip)
    IFS=$OIFS
    [[ ${ip[0]} -le 255 && ${ip[1]} -le 255 \
        && ${ip[2]} -le 255 && ${ip[3]} -le 255 ]]
    stat=$?
fi

return $stat
}