Add UE_Capability_nr config file

doc/RUNMODEM.md

@@ -85,7 +85,7 @@ At the UE the --phy-test flag will
 
 ```bash sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --phy-test```
 
-In phy-test mode it is possible to mimic the reception of UE Capabilities at gNB by passing through the command line parameter `--uecap_file` the location and file name of the input UE Capability file, e.g. `--uecap_file ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/uecap.xml`
+In phy-test mode it is possible to mimic the reception of UE Capabilities at gNB by passing through the command line parameter `--uecap_file` the location and file name of the input UE Capability file, e.g. `--uecap_file ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/uecap_ports1.xml`
 
 ### Launch UE in another window
 
@@ -120,7 +120,7 @@ gNB on machine 1:
 
 `sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.conf --do-ra`
 
-In do-ra mode it is possible to mimic the reception of UE Capabilities at gNB by passing through the command line parameter `--uecap_file` the location and file name of the input UE Capability file, e.g. `--uecap_file ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/uecap.xml`
+In do-ra mode it is possible to mimic the reception of UE Capabilities at gNB by passing through the command line parameter `--uecap_file` the location and file name of the input UE Capability file, e.g. `--uecap_file ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/uecap_ports1.xml`
 
 UE on machine 2:
 
@@ -179,7 +179,7 @@ With the RF simulator (on the same machine):
 
 where `-r` sets the transmission bandwidth configuration in terms of RBs, `-C` sets the downlink carrier frequency and `--ssb` sets the SSB start subcarrier.
 
-Additionally, at UE side `--uecap_file` option can be used to pass the UE Capabilities input file (path location + filename), e.g. `--uecap_file ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/uecap.xml`
+Additionally, at UE side `--uecap_file` option can be used to pass the UE Capabilities input file (path location + filename), e.g. `--uecap_file ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/uecap_ports1.xml`
 
 ### Run OAI with SDAP & Custom DRBs
 

executables/nr-softmodem.h

@@ -29,7 +29,7 @@
     {"U" ,                    CONFIG_HLP_ULBM_PHYTEST,0,                u64ptr:&ulsch_slot_bitmap,          defintval:0,                   TYPE_UINT64, 0},        \
     {"usrp-tx-thread-config", CONFIG_HLP_USRP_THREAD, 0,                iptr:&usrp_tx_thread,               defstrval:0,                   TYPE_INT,    0},        \
     {"ldpc-offload-enable",   CONFIG_HLP_LDPC_OFFLOAD, 0,               iptr:&ldpc_offload_flag,            defstrval:0,                   TYPE_INT,    0},        \
-    {"uecap_file",            CONFIG_HLP_UECAP_FILE,  0,                strptr:&uecap_file,                 defstrval:"./uecap.xml",       TYPE_STRING, 0},        \
+    {"uecap_file",            CONFIG_HLP_UECAP_FILE,  0,                strptr:&uecap_file,                 defstrval:"./uecap_ports1.xml",TYPE_STRING, 0},        \
     {"s" ,                    CONFIG_HLP_SNR,         0,                dblptr:&snr_dB,                     defdblval:25,                  TYPE_DOUBLE, 0},        \
   }
 

executables/nr-uesoftmodem.h

@@ -38,8 +38,8 @@
     {"max-ldpc-iterations",      CONFIG_HLP_MAX_LDPC_ITERATIONS, 0,       u8ptr:&nrUE_params.max_ldpc_iterations,    defuintval:5,       TYPE_UINT8, 0}, \
     {"nr-dlsch-demod-shift",     CONFIG_HLP_DLSHIFT,     0,               iptr:(int32_t *)&nr_dlsch_demod_shift,    defintval:0,     TYPE_INT,    0}, \
     {"V" ,                       CONFIG_HLP_VCD,         PARAMFLAG_BOOL,  iptr:&vcdflag,                      defintval:0,     TYPE_INT,    0}, \
-    {"uecap_file",               CONFIG_HLP_UECAP_FILE,  0,               strptr:&uecap_file,        defstrval:"./uecap.xml", TYPE_STRING, 0}, \
-    {"rrc_config_path",          CONFIG_HLP_RRC_CFG_PATH,0,               strptr:&rrc_config_path,   defstrval:"./",  TYPE_STRING, 0}, \
+    {"uecap_file",               CONFIG_HLP_UECAP_FILE,  0,               strptr:&uecap_file,                 defstrval:"./uecap_ports1.xml", TYPE_STRING, 0}, \
+    {"rrc_config_path",          CONFIG_HLP_RRC_CFG_PATH,0,               strptr:&rrc_config_path,            defstrval:"./",                 TYPE_STRING, 0}, \
     {"ue-idx-standalone",        NULL,                   0,               u16ptr:&ue_idx_standalone,          defuintval:0xFFFF,    TYPE_UINT16,   0} \
 }