Merge remote-tracking branch 'origin/develop' into bugfix-48-L1L2signaling

Conflicts:
	openair1/PHY/LTE_TRANSPORT/print_stats.c
	openair1/SCHED/phy_procedures_lte_eNb.c
	openair1/SCHED/phy_procedures_lte_ue.c
	targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf
	targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf

.gitlab-ci.yml

@@ -8,6 +8,7 @@ job1:
    - echo $EXTERNAL_SHARE_DIR
    - echo $SHELL
    - git rev-parse --abbrev-ref HEAD
+   - git_repo=`git config --get remote.origin.url`
    - git_head=`git rev-parse HEAD`
    - echo $git_head
    - tmp=`git show-ref --head | grep $git_head`
@@ -23,8 +24,8 @@ job1:
    - echo $NRUNS_LTE_SOFTMODEM
    - echo $TIMEOUT_CMD
    - mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
-   - python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -c -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS  $OAI_EXTRA_ARGS -g "$OAI_TEST_CASE_GROUP">& $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log
-   - python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -r -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS `echo $OAI_EXTRA_ARGS` -g "$OAI_TEST_CASE_GROUP" --nrun_lte_softmodem $NRUNS_LTE_SOFTMODEM --timeout_cmd $TIMEOUT_CMD >& $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log
+   - python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -c -5GRepo $git_repo -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS  $OAI_EXTRA_ARGS -g "$OAI_TEST_CASE_GROUP">& $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log
+   - python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -r -5GRepo $git_repo -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS `echo $OAI_EXTRA_ARGS` -g "$OAI_TEST_CASE_GROUP" --nrun_lte_softmodem $NRUNS_LTE_SOFTMODEM --timeout_cmd $TIMEOUT_CMD >& $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log
    - mv $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest.log
    - mv $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest_cleanup.log
    - sshpass -p "$OAI_PASS" rsync -az -e "ssh -o StrictHostKeyChecking=no "  --rsync-path="mkdir -p $NFS_TEST_RESULTS_DIR && rsync" $OPENAIR_DIR/cmake_targets/autotests/log $OAI_USER@localhost:$NFS_TEST_RESULTS_DIR

cmake_targets/CMakeLists.txt

@@ -176,42 +176,65 @@ add_definitions(-DCMAKER)
 set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3")
 set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2") 
 
-Message("RF_BOARD is ${RF_BOARD}")
-# Below has been put in comment because does not work with
-# SVN authentication.
-#
-#find_package(Subversion)
-#if(SUBVERSION_FOUND)
-#  Subversion_WC_INFO(${OPENAIR_DIR} openair)
-#  set (FIRMWARE_VERSION "${openair_WC_REVISION} - ${openair_WC_LAST_CHANGED_DATE}")
-#  Subversion_WC_LOG(${OPENAIR_DIR} Project)
-#else()
-#  set (FIRMWARE_VERSION "No svn information")
-#endif()
-#add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
+
+set(GIT_BRANCH        "UNKNOWN")
+set(GIT_COMMIT_HASH   "UNKNOWN")
+set(GIT_COMMIT_DATE   "UNKNOWN")
+
+
+find_package(Git)
+if(GIT_FOUND)
+  message("git found: ${GIT_EXECUTABLE}")
+  # Get the current working branch
+  execute_process(
+    COMMAND git rev-parse --abbrev-ref HEAD
+    WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
+    OUTPUT_VARIABLE GIT_BRANCH
+    OUTPUT_STRIP_TRAILING_WHITESPACE
+  )
+
+  # Get the latest abbreviated commit hash of the working branch
+  execute_process(
+    COMMAND git log -1 --format=%h
+    WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
+    OUTPUT_VARIABLE GIT_COMMIT_HASH
+    OUTPUT_STRIP_TRAILING_WHITESPACE
+  )
+  
+  # Get the latest commit date of the working branch
+  execute_process(
+    COMMAND git log -1 --format=%cd
+    WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
+    OUTPUT_VARIABLE GIT_COMMIT_DATE
+    OUTPUT_STRIP_TRAILING_WHITESPACE
+  )
+endif()
+
 
 # Below is a hard-coded info
 set (FIRMWARE_VERSION "No svn information")
 add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
-add_definitions("-DPACKAGE_VERSION=\"${FIRMWARE_VERSION}\"")
-add_definitions("-DPACKAGE_BUGREPORT=\"OpenAirInterface web site\"")
+add_definitions("-DPACKAGE_VERSION=\"Branch: ${GIT_BRANCH} Abrev. Hash: ${GIT_COMMIT_HASH} Date: ${GIT_COMMIT_DATE}\"")
+add_definitions("-DPACKAGE_BUGREPORT=\"openair4g-devel@lists.eurecom.fr\"")
 
 
 
 # Debug related options
 #########################################
-add_boolean_option(MSG_PRINT  False "print debug messages")
-add_boolean_option(DISABLE_XER_PRINT False "print XER Format")
-add_boolean_option(XER_PRINT False "print XER Format")
-add_boolean_option(RRC_MSG_PRINT False "print RRC messages")
-add_boolean_option(PDCP_MSG_PRINT False "print PDCP messages to /tmp/pdcp.log")
-add_boolean_option(DEBUG_PDCP_PAYLOAD False "print PDCP PDU to stdout")  # if true, make sure that global and PDCP log levels are trace 
+add_boolean_option(ASN_DEBUG           False "ASN1 coder/decoder Debug")
+add_boolean_option(EMIT_ASN_DEBUG      False "ASN1 coder/decoder Debug")
+add_boolean_option(MSG_PRINT           False "print debug messages")
+add_boolean_option(DISABLE_XER_PRINT   False "print XER Format")
+add_boolean_option(XER_PRINT           False "print XER Format")
+add_boolean_option(RRC_MSG_PRINT       False "print RRC messages")
+add_boolean_option(PDCP_MSG_PRINT      False "print PDCP messages to /tmp/pdcp.log")
+add_boolean_option(DEBUG_PDCP_PAYLOAD  False "print PDCP PDU to stdout")  # if true, make sure that global and PDCP log levels are trace 
 add_boolean_option(DEBUG_MAC_INTERFACE False "print MAC-RLC PDU exchange to stdout") # if true, make sure that global and PDCP log levels are trace 
-add_boolean_option(TRACE_RLC_PAYLOAD False "print RLC PDU to stdout") # if true, make sure that global and PDCP log levels are trace 
-add_boolean_option(TEST_OMG False "???")
-add_boolean_option(DEBUG_OMG False "???")
-add_boolean_option(XFORMS False "This adds the possibility to see the signal oscilloscope")
-add_boolean_option(PRINT_STATS False "This adds the possibility to see the status")
+add_boolean_option(TRACE_RLC_PAYLOAD   False "print RLC PDU to stdout") # if true, make sure that global and PDCP log levels are trace 
+add_boolean_option(TEST_OMG            False "???")
+add_boolean_option(DEBUG_OMG           False "???")
+add_boolean_option(XFORMS              False "This adds the possibility to see the signal oscilloscope")
+add_boolean_option(PRINT_STATS         False "This adds the possibility to see the status")
 
 add_boolean_option(DEBUG_CONSOLE False "makes debugging easier, disables stdout/stderr buffering")
 
@@ -322,6 +345,7 @@ set(S1AP_OAI_generated
   ${S1AP_C_DIR}/s1ap_decoder.c
   ${S1AP_C_DIR}/s1ap_encoder.c
   ${S1AP_C_DIR}/s1ap_xer_print.c
+  ${S1AP_C_DIR}/s1ap_compare.c
   ${S1AP_C_DIR}/s1ap_ies_defs.h
   )
 file(GLOB s1ap_h ${S1AP_C_DIR}/*.h)
@@ -1086,7 +1110,6 @@ add_library(CN_UTILS
   ${OPENAIR3_DIR}/UTILS/conversions.c
   ${OPENAIR3_DIR}/UTILS/enum_string.c
   ${OPENAIR3_DIR}/UTILS/log.c
-  ${OPENAIR3_DIR}/UTILS/mme_config.c
   ${OPENAIR3_DIR}/UTILS/mcc_mnc_itu.c
   )
 
@@ -1427,6 +1450,9 @@ include(FindPkgConfig)
 pkg_search_module(LIBXML2 libxml-2.0 REQUIRED)
 include_directories(${LIBXML2_INCLUDE_DIRS})
 
+pkg_search_module(LIBXSLT libxslt REQUIRED)
+include_directories(${LIBXSLT_INCLUDE_DIRS})
+
 pkg_search_module(OPENSSL openssl REQUIRED)
 include_directories(${OPENSSL_INCLUDE_DIRS})
 
@@ -1718,6 +1744,7 @@ endforeach(myExe)
 
 add_executable(test_epc_generate_scenario
   ${OPENAIR3_DIR}/TEST/EPC_TEST/generate_scenario.c
+  ${OPENAIR3_DIR}/TEST/EPC_TEST/generate_scenario.h
   ${OPENAIR2_DIR}/ENB_APP/enb_config.h
   ${OPENAIR2_DIR}/COMMON/commonDef.h
   ${OPENAIR2_DIR}/COMMON/messages_def.h
@@ -1726,7 +1753,28 @@ add_executable(test_epc_generate_scenario
   ${OPENAIR_BIN_DIR}/messages_xml.h
   )
 target_link_libraries (test_epc_generate_scenario
-  -Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}  
+  -Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${ITTI_LIB} ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}  
+  )
+
+add_executable(test_epc_play_scenario
+  ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario.c
+  ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_decode.c
+  ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_display.c
+  ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_fsm.c
+  ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_parse.c
+  ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap.c
+  ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap_compare_ie.c
+  ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap_eNB_defs.h
+  ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_sctp.c
+  ${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario.h
+  ${OPENAIR2_DIR}/COMMON/commonDef.h
+  ${OPENAIR2_DIR}/COMMON/messages_def.h
+  ${OPENAIR2_DIR}/COMMON/messages_types.h
+  ${OPENAIR_BIN_DIR}/messages_xml.h
+  )
+target_include_directories(test_epc_play_scenario PUBLIC /usr/local/share/asn1c)
+target_link_libraries (test_epc_play_scenario
+  -Wl,--start-group RRC_LIB S1AP_LIB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${ITTI_LIB} ${MSC_LIB} -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}  
   )
 
 

cmake_targets/autotests/README.txt

@@ -171,6 +171,41 @@ Obj.#   Case#   Test#	Description
 01      65      04      Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
 01      65      05      Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
 
+
+01      70      00      lte-softmodem tests with SoDeRa RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
+01      70      00      Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
+01      70      01      Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
+01      70      02      Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
+01      70      03      Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
+01      70      04      Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
+01      70      05      Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+
+
+01      75      00      lte-softmodem + RRH tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
+01      75      00      Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
+01      75      01      Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
+01      75      02      Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
+01      75      03      Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
+01      75      04      Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
+01      75      05      Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+
+01      80      00      lte-softmodem + RRH tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
+01      80      00      Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
+01      80      01      Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
+01      80      02      Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
+01      80      03      Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
+01      80      04      Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
+01      80      05      Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+
+01      85      00      lte-softmodem + RRH tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
+01      85      00      Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
+01      85      01      Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
+01      85      02      Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
+01      85      03      Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
+01      85      04      Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
+01      85      05      Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
+
+
 01      64              lte-softmodem-noS1 tests
 
 02                      Functional test case

cmake_targets/autotests/run_exec_autotests.bash

@@ -12,7 +12,7 @@ trap handle_ctrl_c INT
 source $OPENAIR_DIR/cmake_targets/tools/test_helper
 
 
-#SUDO="sudo -E "
+SUDO="sudo -E -S"
 tdir=$OPENAIR_DIR/cmake_targets/autotests
 rm -fr $tdir/bin 
 mkdir -p $tdir/bin
@@ -404,14 +404,12 @@ until [ -z "$1" ]
    esac
   done
 
-if [ "$SET_PASSWORD" == "1" ]; then
-   mypassword=$passwd
-else
-   read -s -p "Enter Password: " mypassword
+if [ "$SET_PASSWORD" != "1" ]; then
+   read -s -p "Enter Password: " passwd
 fi
 
 tmpfile=`mktemp`
-echo \'$passwd\' | $SUDO echo $HOME >& $tmpfile
+echo $passwd | $SUDO echo $HOME > $tmpfile
 tstsudo=`cat $tmpfile`
 if [ "$tstsudo" != "$HOME" ]; then
   echo "$USER might not have sudo privileges. Exiting" 
@@ -509,7 +507,7 @@ for search_expr in "${test_case_array[@]}"
     if [ "$class" == "compilation" ]; then
         test_compile "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags"
     elif  [ "$class" == "execution" ]; then
-        $SUDO killall -q oaisim_nos1
+        echo \'passwd\' | $SUDO killall -q oaisim_nos1
         test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" "$mypassword" "$test_config_file"
     else
         echo "Unexpected class of test case...Skipping the test case $name ...."

cmake_targets/autotests/tools/configure_cots_bandrich_ue.py

@@ -131,6 +131,7 @@ def start_ue () :
         ip = IPRoute()
         idx = ip.link_lookup(ifname=iface)[0]
         os.system ('route add ' + gw + ' ppp0')
+        os.system('sleep 5')
         os.system ('ping ' + gw)
         break
      except Exception, e:

cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py

+#!/usr/bin/python 
+
+import time
+import serial
+import os
+from pyroute2 import IPRoute
+import sys
+import re
+import threading
+import signal
+import traceback
+import os
+import commands
+
+# configure the serial connections (the parameters differs on the device you are connecting to)
+#First we find an open port to work with
+serial_port=''
+ser=serial.Serial()
+openair_dir = os.environ.get('OPENAIR_DIR')
+if openair_dir == None:
+  print "Error getting OPENAIR_DIR environment variable"
+  sys.exit(1)
+
+sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
+
+from lib_autotest import *
+
+def find_open_port():
+   global serial_port, ser
+   max_ports=100
+   if os.path.exists(serial_port) == True:
+     return serial_port
+   for port in range(0,100):
+      serial_port = '/dev/ttyUSB'+str(port)
+      if os.path.exists(serial_port) == True:
+         print 'New Serial Port : ' + serial_port
+         break
+
+   ser = serial.Serial(port=serial_port)
+   return
+
+
+    
+#serial_port = '/dev/ttyUSB2'
+bandrich_ppd_config = os.environ.get('OPENAIR_DIR') + '/cmake_targets/autotests/tools/wdial.bandrich.conf'
+
+exit_flag=0
+
+def signal_handler(signal, frame):
+        print('You pressed Ctrl+C!')
+        print('Resetting the UE to detached state')
+        timeout=10
+        exit_flag=1
+        send_command('AT+CGATT=0' , 'OK' , timeout)
+        sys.exit(0)
+
+signal.signal(signal.SIGINT, signal_handler)
+
+
+
+#ser.open()
+#ser.isOpen()
+
+class pppThread (threading.Thread):
+    def __init__(self, threadID, name, counter):
+        threading.Thread.__init__(self)
+        self.threadID = threadID
+        self.name = name
+        self.counter = counter
+    def run(self):
+        print "Starting " + self.name
+        #Here we keep running pppd thread in indefinite loop as this script terminates sometimes
+        #while 1:
+        while 1:
+           time.sleep(5) #Hard coded, do not reduce this number! 
+           print "Starting wvdial now..."
+           print 'exit_flag = ' + str(exit_flag)
+           send_command('AT+CGATT=1','OK', 300)
+           os.system('wvdial -C ' + bandrich_ppd_config + '' )
+           if exit_flag == 1:
+              print "Exit flag set to true. Exiting pppThread now"
+           print "Terminating wvdial now..."
+
+def send_command (cmd, response, timeout):
+   count=0
+   sleep_duration = 1
+   print 'In function: send_command: cmd = <' + cmd + '> response: <' + response + '> \n'
+   global serial_port, ser
+   while count <= timeout:
+      try:
+        #Sometimes the port does not exist coz of reset in modem.
+        #In that case, we need to search for this port again
+        if os.path.exists(serial_port) == False:
+            find_open_port()
+        ser.write (cmd + '\r\n')
+        out = ''
+        time.sleep(sleep_duration)
+        count = count + sleep_duration
+        while ser.inWaiting() > 0:
+            out += ser.read(1)
+        print 'out = <' + out + '> response = <' + response + '> \n'
+        if re.search(response, out):
+          break
+      except Exception, e:
+        error = ' cmd : ' + cmd + ' response : ' + response
+        error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: '  + str(e.__class__) + " : " + str( e)
+        error = error + traceback.format_exc()
+        print error
+        
+
+def start_ue () :
+   #print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
+   timeout=60 #timeout in seconds
+   send_command('AT', 'OK' , timeout)
+   #send_command('AT+CFUN=1' , 'OK' , timeout)
+   #send_command('AT+CGATT=0' , 'OK' , timeout)
+   send_command('AT+CGATT=1','OK', 300)
+   #os.system('wvdial -C ' + bandrich_ppd_config + ' &' )
+   
+   thread_ppp = pppThread(1, "ppp_thread", 1)
+   thread_ppp.start()
+
+   iface='ppp0'
+   
+   while 1:
+     time.sleep ( 2)
+     #Now we check if ppp0 interface is up and running
+     try:
+        if exit_flag == 1:
+          break
+        ip = IPRoute()
+        idx = ip.link_lookup(ifname=iface)[0]
+        os.system ('route add ' + gw + ' ppp0')
+        os.system('sleep 5')
+        os.system ('ping ' + gw)
+        break
+     except Exception, e:
+        error = ' Interface ' + iface + 'does not exist...'
+        error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: '  + str(e.__class__) + " : " + str( e)
+        error = error + traceback.format_exc()
+        print error
+    
+   thread_ppp.join()
+
+def stop_ue():
+   timeout=60
+   os.system('killall wvdial')
+   send_command('AT', 'OK' , timeout)
+   send_command('AT+CGATT=0' , 'OK|ERROR' , timeout)
+   #send_command('AT+CFUN=4' , 'OK' , timeout)
+
+
+#reset the USB BUS of Bandrich UE
+def reset_ue():
+  stringIdBandrich='Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard'
+  status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBandrich + '\'')
+  if (out == '') :
+     print "Bandrich 4G LTE Adapter not found. Exiting now..."
+     sys.exit()
+  p=re.compile('Bus\s*(\w+)\s*Device\s*(\w+):\s*ID\s*(\w+):(\w+)')
+  res=p.findall(out)
+  BusId=res[0][0]
+  DeviceId=res[0][1]
+  VendorId=res[0][2]
+  ProductId=res[0][3]
+  usb_dir= find_usb_path(VendorId, ProductId)
+  print "Bandrich 4G LTE Adapter found in..." + usb_dir
+  cmd = "sudo sh -c \"echo 0 > " + usb_dir + "/authorized\""
+  os.system(cmd + " ; sleep 15" )
+  cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
+  os.system(cmd + " ; sleep 30" )
+
+i=1
+gw='192.172.0.1'
+while i <  len(sys.argv):
+    arg=sys.argv[i]
+    if arg == '--start-ue' :
+        find_open_port()
+        print 'Using Serial port : ' + serial_port  
+        start_ue()
+    elif arg == '--stop-ue' :
+        find_open_port()
+        print 'Using Serial port : ' + serial_port  
+        stop_ue()
+    elif arg == '--reset-ue' :
+        reset_ue()
+    elif arg == '-gw' :
+        gw = sys.argv[i+1]
+        i=i+1
+    elif arg == '-h' :
+        print "--reset-ue:  Reset the UE on USB Bus. Similar to unplugging and plugging the UE"
+        print "--stop-ue:  Stop the UE. Send DETACH command" 
+        print "--start-ue:  Start the UE. Send ATTACH command"
+        print "-gw:  Specify the default gw as sometimes the gateway/route arguments are not set properly via wvdial"
+    else :
+        print " Script called with wrong arguments, arg = " + arg
+        sys.exit()
+    i = i +1
+
+

cmake_targets/autotests/tools/search_repl.py

@@ -26,6 +26,9 @@ if keyword == 'mme_ip_address':
 elif keyword == 'IPV4_LIST':
    replacement_text = keyword + ' =  ( ' + replacement_text + '  ) ; '
    string = re.sub(r"IPV4_LIST\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M)
+elif keyword == 'rrh_gw_config':
+   replacement_text = keyword + ' =  ( { ' + replacement_text + ' } ) ; '
+   string = re.sub(r"rrh_gw_config\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M)
 else :
    replacement_text = keyword + ' =  ' + replacement_text + ' ; '
    string = re.sub(r"%s\s*=\s*([^\$]+?)\s*;" % keyword , replacement_text, string, re.M)   

cmake_targets/build_oai

@@ -42,13 +42,13 @@ THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
 source $THIS_SCRIPT_PATH/tools/build_helper
 
 MSC_GEN="False"
-XFORMS="False"
+XFORMS="True"
 PRINT_STATS="False"
 VCD_TIMING="False"
 LOWLATENCY_FLAG_USER="False"
 FORCE_LOWLATENCY_FLAG_USER=""
 REL="Rel10"
-HW="EXMIMO"
+HW="None"
 TP="None"
 NOS1=0
 EPC=0
@@ -91,7 +91,7 @@ Options
    default is Rel10,
    Rel8 limits the implementation to 3GPP Release 8 version
 -w | --hardware
-   EXMIMO (Default), USRP, BLADERF, LMSSDR, None
+   EXMIMO, USRP, BLADERF, ETHERNET, LMSSDR, None (Default)
    Adds this RF board support (in external packages installation and in compilation)
 -t | --transport protocol
    ETHERNET , None
@@ -760,9 +760,9 @@ fi
     rm -fr $OPENAIR_DIR/cmake_targets/autotests/log
     mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
     if [ "$RUN_GROUP" -eq "1" ]; then
-        $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
+        $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
     else
-        $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
+        $OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
     fi
     wait
   else

cmake_targets/epc_test/CMakeLists.template

 cmake_minimum_required(VERSION 2.8)
 
 set (  CMAKE_BUILD_TYPE "RelWithDebInfo" )
+set (  ASN_DEBUG False)
 set (  ADDR_CONF False )
 set (  DEBUG_OMG False )
 set (  DISABLE_XER_PRINT False )
 set (  DRIVER2013 True )
 set (  EMOS False )
+set (  EMIT_ASN_DEBUG False )
 set (  ENABLE_FXP True )
 set (  ENABLE_ITTI True )
 set (  ENABLE_NAS_UE_LOGGING True )
@@ -47,9 +49,9 @@ set (  OAI_EMU False )
 set (  OAISIM False )
 set (  OAI_NW_DRIVER_TYPE_ETHERNET False )
 set (  OAI_NW_DRIVER_USE_NETLINK True )
-set (  OPENAIR1 False )
-set (  OPENAIR2 False )
-set (  OPENAIR_LTE F )
+set (  OPENAIR1 True )
+set (  OPENAIR2 True )
+set (  OPENAIR_LTE True )
 set (  PACKAGE_NAME "epc_test" )
 set (  PBS_SIM False )
 set (  PDCP_USE_NETLINK True )
@@ -74,4 +76,4 @@ set (  SMBV False )
 set (  TEST_OMG False )
 set (  USE_MME "R10" )
 set (  USER_MODE True )
-set (  XER_PRINT False )
+set (  XER_PRINT True )

cmake_targets/lte-simulators/CMakeLists.txt

@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 2.8)
 set(PACKAGE_NAME "unitary_tests_simulators")
 set(PHYSIM True)
 set(RF_BOARD None)
-set(XFORMS False)
+set(XFORMS True)
 
 set(DEBUG_PHY False)
 set(MU_RECIEVER False)

cmake_targets/tools/build_helper

@@ -30,7 +30,7 @@
 ################################################################################
 # file build_helper
 # brief
-# author Laurent Thomas
+# authors Laurent Thomas, Lionel GAUTHIER
 #
 #######################################
 SUDO='sudo -E'
@@ -269,7 +269,9 @@ check_install_oai_software() {
 	pydb \
 	wvdial \
         python-numpy \
-        sshpass
+        sshpass \
+        libxslt1-dev
+
     $SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
     if [ `lsb_release -rs` = '12.04' ] ; then
         install_nettle_from_source
@@ -288,13 +290,15 @@ install_asn1c_from_source(){
     asn1_install_dir=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
     echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_dir "
     (
-    rm -rf /tmp/asn1c-r1516
+    $SUDO rm -rf /tmp/asn1c-r1516
     mkdir -p /tmp/asn1c-r1516
     cd /tmp/asn1c-r1516
-    svn co https://github.com/vlm/asn1c/trunk  /tmp/asn1c-r1516 -r 1516 
-    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0 
-    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0 
-    patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0 
+    rm -rf /tmp/asn1c-r1516/*
+    svn co https://github.com/vlm/asn1c/trunk  /tmp/asn1c-r1516 -r 1516 > /tmp/log_compile_asn1c
+    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0 >> /tmp/log_compile_asn1c
+    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0 >> /tmp/log_compile_asn1c
+    patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0 >> /tmp/log_compile_asn1c
+    patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_3.p0 >> /tmp/log_compile_asn1c
     ./configure
     make -j`nproc`
     $SUDO make install
@@ -324,7 +328,6 @@ install_nas_tools() {
 }
 
 
-
 ################################
 # set_openair_env
 ###############################
@@ -397,4 +400,4 @@ if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
 fi
 
 return $stat
-}
+}
\ No newline at end of file

cmake_targets/tools/build_test_epc_tools

@@ -22,7 +22,7 @@
 #  Contact Information
 #  OpenAirInterface Admin: openair_admin@eurecom.fr
 #  OpenAirInterface Tech : openair_tech@eurecom.fr
-#  OpenAirInterface Dev  : openair4g-devel@eurecom.fr
+#  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
 #
 #  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
 #
@@ -121,6 +121,7 @@ function main()
       echo "Cleaning TEST_EPC"
     fi
     rm -f $OPENAIR_DIR/targets/bin/test_epc_generate_scenario
+    rm -f $OPENAIR_DIR/targets/bin/test_epc_play_scenario
     rm -Rf build 2>&1
     mkdir -m 777 -p -v build
   fi
@@ -140,6 +141,13 @@ function main()
   compilations \
       epc_test test_epc_generate_scenario \
       test_epc_generate_scenario $dbin/test_epc_generate_scenario
+
+  compilations \
+      epc_test test_epc_play_scenario \
+      test_epc_play_scenario $dbin/test_epc_play_scenario
+      
+  $SUDO cp -upv test_epc_generate_scenario /usr/local/bin
+  $SUDO cp -upv test_epc_play_scenario     /usr/local/bin
 }
 
 

cmake_targets/tools/run_enb_s1_usrp

@@ -29,9 +29,9 @@
 ################################################################################
 # file run_enb_s1_usrp
 # brief run script for eNB USRP.
-# author  Lionel GAUTHIER
+# author  Lionel GAUTHIER and Navid Nikaein
 # company Eurecom
-# email:  lionel.gauthier@eurecom.fr 
+# email:  lionel.gauthier@eurecom.fr and navid.nikaein@eurecom.fr
 
 
 ################################
@@ -56,6 +56,8 @@ function help()
   echo_error "Mandatory arguments to long options are mandatory for short options too."
   echo_error "  -g, --gdb                           Run with GDB."
   echo_error "  -h, --help                          Print this help."
+  echo_error "  -e, --ulsch-max-errors    num-errs  maximum allowed number of uplink errors"
+  echo_error "  -f, --rf-config-file      filename  RF specific configuration file"
   echo_error "  -K, --itti-dump-file      filename  ITTI dump file containing all ITTI events occuring during EPC runtime.(can omit file name if last argument)"
   echo_error "  -M, --target-dl-mcs       mcs       Downlink target MCS."
   echo_error "  -m, --mscgen              directory Generate mscgen output files in a directory"
@@ -137,7 +139,27 @@ function main()
         shift;
         exit 0
         ;;
-      -K | --itti-dump-file)
+     -e | --ulsch-max-errors)
+        ulsch_max_errors=$2
+        echo "setting  --ulsch-max-errors to $ulsch_max_errors"
+        exe_arguments="$exe_arguments --ulsch-max-errors=$ulsch_max_errors"
+        shift 2;
+	 ;;      
+     -f | --rf-config-file)
+        rf_config_file=$2
+        # can omit file name if last arg on the line
+        if [ "x$rf_config_file" = "x" ]; then
+          rf_config_file=null
+          shift 1;
+        else
+          shift 2;
+        fi
+	if [ "$rf_config_file" != "null" ]; then
+            echo "setting  --rf-config-file to $rf_config_file"
+            exe_arguments="$exe_arguments --rf-config-file=$rf_config_file"
+	fi 
+        ;;      
+     -K | --itti-dump-file)
         itti_dump_file=$2
         # can omit file name if last arg on the line
         if [ "x$itti_dump_file" = "x" ]; then

cmake_targets/tools/stop_exmimo2

@@ -13,5 +13,5 @@ sudo -E $OPENAIR_DIR/cmake_targets/tools/init_exmimo2
 
 #now we stop the card from transmitting anything
 cd $OPENAIR_DIR/targets/bin
-sudo -E octave $OPENAIR_DIR/cmake_targets/tools/exmimo_stop_octave.m
+sudo -E octave -H --no-gui $OPENAIR_DIR/cmake_targets/tools/exmimo_stop_octave.m
 

openair1/PHY/LTE_ESTIMATION/adjust_gain.c

@@ -38,23 +38,16 @@ extern int card;
 #endif
 
 void
-phy_adjust_gain (PHY_VARS_UE *phy_vars_ue, uint8_t eNB_id)
+phy_adjust_gain (PHY_VARS_UE *phy_vars_ue, uint32_t rx_power_fil_dB, uint8_t eNB_id)
 {
 
-  uint16_t rx_power_fil_dB;
 #ifdef EXMIMO
   exmimo_config_t *p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr;
   uint16_t i;
 #endif
-  int rssi;
-
-  rssi = dB_fixed(phy_vars_ue->PHY_measurements.rssi);
-
-  if (rssi>0) rx_power_fil_dB = rssi;
-  else rx_power_fil_dB = phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id];
 
   LOG_D(PHY,"Gain control: rssi %d (%d,%d)\n",
-         rssi,
+         rx_power_fil_dB,
          phy_vars_ue->PHY_measurements.rssi,
          phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id]
         );

openair1/PHY/LTE_ESTIMATION/defs.h

@@ -213,6 +213,7 @@ int8_t set_RSRQ_filtered(module_id_t Mod_id,uint8_t CC_id,uint8_t eNB_index,floa
 
 //! Automatic gain control
 void phy_adjust_gain (PHY_VARS_UE *phy_vars_ue,
+		      uint32_t rx_power_fil_dB,
                       unsigned char eNB_id);
 
 int lte_ul_channel_estimation(PHY_VARS_eNB *phy_vars_eNB,

openair1/PHY/LTE_ESTIMATION/lte_sync_time.c

@@ -485,13 +485,10 @@ int lte_sync_time(int **rxdata, ///rx data in time domain
 
   *eNB_id = sync_source;
 
-#ifdef DEBUG_PHY
-  msg("[PHY][UE] lte_sync_time: Sync source = %d, Peak found at pos %d, val = %d\n",
-      sync_source,peak_pos,peak_val);
-
-
+  LOG_D(PHY,"[UE] lte_sync_time: Sync source = %d, Peak found at pos %d, val = %d (%d dB)\n",sync_source,peak_pos,peak_val,dB_fixed(peak_val)/2);
 
 
+#ifdef DEBUG_PHY
   if (debug_cnt == 0) {
     write_output("sync_corr0_ue.m","synccorr0",sync_corr_ue0,2*length,1,2);
     write_output("sync_corr1_ue.m","synccorr1",sync_corr_ue1,2*length,1,2);

openair1/PHY/LTE_TRANSPORT/initial_sync.c

@@ -280,7 +280,6 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
   uint8_t flip_fdd_ncp,flip_fdd_ecp,flip_tdd_ncp,flip_tdd_ecp;
   //  uint16_t Nid_cell_fdd_ncp=0,Nid_cell_fdd_ecp=0,Nid_cell_tdd_ncp=0,Nid_cell_tdd_ecp=0;
   LTE_DL_FRAME_PARMS *frame_parms = &phy_vars_ue->lte_frame_parms;
-  int i;
   int ret=-1;
   int aarx,rx_power=0;
   /*#ifdef OAI_USRP
@@ -309,34 +308,6 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
   LOG_I(PHY,"[UE%d] Initial sync : Estimated PSS position %d, Nid2 %d\n",phy_vars_ue->Mod_id,sync_pos,phy_vars_ue->lte_ue_common_vars.eNb_id);
 #endif
 
-
-  for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
-    rx_power += signal_energy(&phy_vars_ue->lte_ue_common_vars.rxdata[aarx][sync_pos2],
-                              frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
-
-  phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] = dB_fixed(rx_power/frame_parms->nb_antennas_rx);
-
-#ifdef DEBUG_INITIAL_SYNCH
-  LOG_I(PHY,"[UE%d] Initial sync : Estimated power: %d dB\n",phy_vars_ue->Mod_id,phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] );
-#endif
-
-#ifdef EXMIMO
-
-  if ((openair_daq_vars.rx_gain_mode == DAQ_AGC_ON) &&
-      (mode != rx_calib_ue) && (mode != rx_calib_ue_med) && (mode != rx_calib_ue_byp) )
-    //phy_adjust_gain(phy_vars_ue,0);
-    gain_control_all(phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
-
-#else
-#ifndef OAI_USRP
-#ifndef OAI_BLADERF
-#ifndef OAI_LMSSDR
-  phy_adjust_gain(phy_vars_ue,0);
-#endif
-#endif
-#endif
-#endif
-
   // SSS detection
 
   // PSS is hypothesized in last symbol of first slot in Frame
@@ -525,20 +496,20 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
 #endif
 
     if (phy_vars_ue->UE_scan_carrier == 0) {
-#ifdef OPENAIR2
-      LOG_I(PHY,"[UE%d] Sending synch status to higher layers\n",phy_vars_ue->Mod_id);
-      //mac_resynch();
-      mac_xface->dl_phy_sync_success(phy_vars_ue->Mod_id,phy_vars_ue->frame_rx,0,1);//phy_vars_ue->lte_ue_common_vars.eNb_id);
-#endif //OPENAIR2
-      
+      if (phy_vars_ue->mac_enabled==1) {
+	LOG_I(PHY,"[UE%d] Sending synch status to higher layers\n",phy_vars_ue->Mod_id);
+	//mac_resynch();
+	mac_xface->dl_phy_sync_success(phy_vars_ue->Mod_id,phy_vars_ue->frame_rx,0,1);//phy_vars_ue->lte_ue_common_vars.eNb_id);
+	phy_vars_ue->UE_mode[0] = PRACH;
+      }
+      else {
+	phy_vars_ue->UE_mode[0] = PUSCH;
+      }
+
       generate_pcfich_reg_mapping(frame_parms);
       generate_phich_reg_mapping(frame_parms);
       //    init_prach625(frame_parms);
-#ifndef OPENAIR2
-      phy_vars_ue->UE_mode[0] = PUSCH;
-#else
-      phy_vars_ue->UE_mode[0] = PRACH;
-#endif
+
       //phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors=0;
       phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors_conseq=0;
     //phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors_last=0;
@@ -592,6 +563,65 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
 
   }
 
+  // gain control
+  if (ret!=0) { //we are not synched, so we cannot use rssi measurement (which is based on channel estimates)
+    rx_power = 0;
+
+    // do a measurement on the best guess of the PSS
+    for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
+      rx_power += signal_energy(&phy_vars_ue->lte_ue_common_vars.rxdata[aarx][sync_pos2],
+				frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
+    
+    /*
+    // do a measurement on the full frame
+    for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
+      rx_power += signal_energy(&phy_vars_ue->lte_ue_common_vars.rxdata[aarx][0],
+				frame_parms->samples_per_tti*10);
+    */
+
+    // we might add a low-pass filter here later
+    phy_vars_ue->PHY_measurements.rx_power_avg[0] = rx_power/frame_parms->nb_antennas_rx; 
+
+    phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] = dB_fixed(phy_vars_ue->PHY_measurements.rx_power_avg[0]);
+
+#ifdef DEBUG_INITIAL_SYNCH
+  LOG_I(PHY,"[UE%d] Initial sync : Estimated power: %d dB\n",phy_vars_ue->Mod_id,phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] );
+#endif
+
+#ifdef EXMIMO
+  if ((openair_daq_vars.rx_gain_mode == DAQ_AGC_ON) &&
+      (mode != rx_calib_ue) && (mode != rx_calib_ue_med) && (mode != rx_calib_ue_byp) )
+    //phy_adjust_gain(phy_vars_ue,0);
+    gain_control_all(phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
+
+#else
+#ifndef OAI_USRP
+#ifndef OAI_BLADERF 
+#ifndef OAI_LMSSDR
+  phy_adjust_gain(phy_vars_ue,phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
+#endif
+#endif
+#endif
+#endif
+  }
+  else {
+#ifdef EXMIMO
+  if ((openair_daq_vars.rx_gain_mode == DAQ_AGC_ON) &&
+      (mode != rx_calib_ue) && (mode != rx_calib_ue_med) && (mode != rx_calib_ue_byp) )
+    //phy_adjust_gain(phy_vars_ue,0);
+    gain_control_all(dB_fixed(phy_vars_ue->PHY_measurements.rssi),0);
+
+#else
+#ifndef OAI_USRP
+#ifndef OAI_BLADERF 
+#ifndef OAI_LMSSDR
+  phy_adjust_gain(phy_vars_ue,dB_fixed(phy_vars_ue->PHY_measurements.rssi),0);
+#endif
+#endif
+#endif
+#endif
+  }
+
   //  exit_fun("debug exit");
   return ret;
 }

openair1/PHY/LTE_TRANSPORT/print_stats.c

@@ -107,10 +107,10 @@ int dump_ue_stats(PHY_VARS_UE *phy_vars_ue, char* buffer, int length, runmode_t
     len += sprintf(&buffer[len], "[UE PROC] timing_advance = %d\n",phy_vars_ue->timing_advance);
     if (phy_vars_ue->UE_mode[0]==PUSCH) {
       len += sprintf(&buffer[len], "[UE PROC] Po_PUSCH = %d dBm (PL %d dB, Po_NOMINAL_PUSCH %d dBm, PHR %d dB)\n", 
-		     PHY_vars_UE_g[0][0]->ulsch_ue[0]->Po_PUSCH,
+		     phy_vars_ue->ulsch_ue[0]->Po_PUSCH,
 		     get_PL(phy_vars_ue->Mod_id,phy_vars_ue->CC_id,0),
-		     mac_xface->get_Po_NOMINAL_PUSCH(phy_vars_ue->Mod_id,0),
-		     PHY_vars_UE_g[0][0]->ulsch_ue[0]->PHR);
+		     phy_vars_ue->lte_frame_parms.ul_power_control_config_common.p0_NominalPUSCH,
+		     phy_vars_ue->ulsch_ue[0]->PHR);
       len += sprintf(&buffer[len], "[UE PROC] Po_PUCCH = %d dBm (Po_NOMINAL_PUCCH %d dBm, g_pucch %d dB)\n", 
 		     get_PL(phy_vars_ue->Mod_id,phy_vars_ue->CC_id,0)+
 		     phy_vars_ue->lte_frame_parms.ul_power_control_config_common.p0_NominalPUCCH+
@@ -582,9 +582,7 @@ int dump_eNB_stats(PHY_VARS_eNB *phy_vars_eNB, char* buffer, int length)
       len += sprintf(&buffer[len],"%4d ",
                      phy_vars_eNB->PHY_measurements_eNB[eNB].n0_subband_power_tot_dBm[i]);
       if ((i>0) && ((i%25) == 0)) 
-	len += sprintf(&buffer[len],"\n                                 ",
-                     phy_vars_eNB->PHY_measurements_eNB[eNB].n0_subband_power_tot_dBm[i]);
-
+	len += sprintf(&buffer[len],"\n");
     }
     len += sprintf(&buffer[len],"\n");
     len += sprintf(&buffer[len],"\nPERFORMANCE PARAMETERS\n");

openair1/PHY/TOOLS/cmult_mm.c

-/*******************************************************************************
-    OpenAirInterface
-    Copyright(c) 1999 - 2014 Eurecom
-
-    OpenAirInterface is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-
-    OpenAirInterface is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with OpenAirInterface.The full GNU General Public License is
-   included in this distribution in the file called "COPYING". If not,
-   see <http://www.gnu.org/licenses/>.
-
-  Contact Information
-  OpenAirInterface Admin: openair_admin@eurecom.fr
-  OpenAirInterface Tech : openair_tech@eurecom.fr
-  OpenAirInterface Dev  : openair4g-devel@lists.eurecom.fr
-
-  Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
-
- *******************************************************************************/
-#include "defs.h"
-
-int mult_cpx_matrix_h(short *x1[2][2],
-                      short *x2[2][2],
-                      short *y[2][2],
-                      unsigned int N,
-                      unsigned short output_shift,
-                      short hermitian)
-{
-
-  if (hermitian) {
-    // this computes x1^H*x2 and stores it in y
-    mult_cpx_vector_h(x2[0][0],x1[0][0],y[0][0],N,output_shift,1);
-    mult_cpx_vector_h(x2[0][1],x1[0][1],y[0][0],N,output_shift,1);
-    mult_cpx_vector_h(x2[0][0],x1[1][0],y[1][0],N,output_shift,1);
-    mult_cpx_vector_h(x2[0][1],x1[1][1],y[1][0],N,output_shift,1);
-    mult_cpx_vector_h(x2[1][0],x1[0][0],y[0][1],N,output_shift,1);
-    mult_cpx_vector_h(x2[1][1],x1[0][1],y[0][1],N,output_shift,1);
-    mult_cpx_vector_h(x2[1][0],x1[1][0],y[1][1],N,output_shift,1);
-    mult_cpx_vector_h(x2[1][1],x1[1][1],y[1][1],N,output_shift,1);
-  } else {
-    // this computes x1*x2^H and stores it in y
-    mult_cpx_vector_h(x1[0][0],x2[0][0],y[0][0],N,output_shift,1);
-    mult_cpx_vector_h(x1[0][1],x2[0][1],y[0][0],N,output_shift,1);
-    mult_cpx_vector_h(x1[0][0],x2[1][0],y[0][1],N,output_shift,1);
-    mult_cpx_vector_h(x1[0][1],x2[1][1],y[0][1],N,output_shift,1);
-    mult_cpx_vector_h(x1[1][0],x2[0][0],y[1][0],N,output_shift,1);
-    mult_cpx_vector_h(x1[1][1],x2[0][1],y[1][0],N,output_shift,1);
-    mult_cpx_vector_h(x1[1][0],x2[1][0],y[1][1],N,output_shift,1);
-    mult_cpx_vector_h(x1[1][1],x2[1][1],y[1][1],N,output_shift,1);
-  }
-}
-
-int mult_cpx_matrix_vector(int *x1[2][2],
-                           int *x2[2],
-                           int *y[2],
-                           unsigned int N,
-                           unsigned short output_shift)
-{
-
-  Zero_Buffer(y[0],N*8);
-  Zero_Buffer(y[1],N*8);
-
-  // this computes x1*x2 and stores it in y (32 bit)
-  mult_cpx_vector_add32((short*)x2[0],(short*)x1[0][0],(short*)y[0],N);
-  mult_cpx_vector_add32((short*)x2[1],(short*)x1[0][1],(short*)y[0],N);
-  mult_cpx_vector_add32((short*)x2[0],(short*)x1[1][0],(short*)y[1],N);
-  mult_cpx_vector_add32((short*)x2[1],(short*)x1[1][1],(short*)y[1],N);
-
-  // shift and pack
-  shift_and_pack((short*)y[0],N,output_shift);
-  shift_and_pack((short*)y[1],N,output_shift);
-
-}
-
-#ifdef MAIN_MM
-#include <stdio.h>
-#include <stdlib.h>
-main ()
-{
-  short x1_00[256] __attribute__((aligned(16)));
-  short x1_10[256] __attribute__((aligned(16)));
-  short x1_01[256] __attribute__((aligned(16)));
-  short x1_11[256] __attribute__((aligned(16)));
-  short x2_0[256] __attribute__((aligned(16)));
-  short x2_1[256] __attribute__((aligned(16)));
-  short y_0[256] __attribute__((aligned(16)));
-  short y_1[256] __attribute__((aligned(16)));
-
-  int *x1[2][2];
-  int *x2[2];
-  int *y[2];
-  int i,m,n;
-
-  x1[0][0] = (int*)x1_00;
-  x1[0][1] = (int*)x1_01;
-  x1[1][0] = (int*)x1_10;
-  x1[1][1] = (int*)x1_11;
-  x2[0] = (int*)x2_0;
-  x2[1] = (int*)x2_1;
-  y[0] = (int*)y_0;
-  y[1] = (int*)y_1;
-
-  for(m=0; m<2; m++) {
-    for(n=0; n<2; n++) {
-      for(i=0; i<256; i+=4) {
-        ((short*)x1[m][n])[i] = ((short) rand())/4;
-        ((short*)x1[m][n])[i+1] = ((short) rand())/4;
-        ((short*)x1[m][n])[i+2] = -((short*)x1[m][n])[i+1];
-        ((short*)x1[m][n])[i+3] = ((short*)x1[m][n])[i];
-      }
-    }
-
-    for(i=0; i<256; i+=4) {
-      ((short*)x2[m])[i] = ((short) rand())/4;
-      ((short*)x2[m])[i+1] = ((short) rand())/4;
-      ((short*)x2[m])[i+2] = ((short*)x2[m])[i];
-      ((short*)x2[m])[i+3] = ((short*)x2[m])[i+1];
-    }
-
-    Zero_Buffer(y[m],512);
-  }
-
-  /*
-  input[0] = 100;
-  input[1] = 200;
-  input[2] = -200;
-  input[3] = 100;
-  input[4] = 1000;
-  input[5] = 2000;
-  input[6] = -2000;
-  input[7] = 1000;
-  input[8] = 100;
-  input[9] = 200;
-  input[10] = -200;
-  input[11] = 100;
-  input[12] = 1000;
-  input[13] = 2000;
-  input[14] = -2000;
-  input[15] = 1000;
-
-  input2[0] = 2;
-  input2[1] = 1;
-  input2[2] = 2;
-  input2[3] = 1;
-  input2[4] = 20;
-  input2[5] = 10;
-  input2[6] = 20;
-  input2[7] = 10;
-  input2[8] = 2;
-  input2[9] = 1;
-  input2[10] = 2;
-  input2[11] = 1;
-  input2[12] = 2000;
-  input2[13] = 1000;
-  input2[14] = 2000;
-  input2[15] = 1000;
-
-  x1[0][0] = (int*)input;
-  x1[0][1] = (int*)input;
-  x1[1][0] = (int*)input;
-  x1[1][1] = (int*)input;
-
-  x2[0] = (int*)input2;
-  x2[1] = (int*)input2;
-
-  y[0] = (int*)output;
-  y[1] = (int*)output2;
-  */
-
-  mult_cpx_matrix_vector(x1,x2,y,64,15);
-
-  //mult_cpx_vector_add32(x2[0],x1[0][0],y[0],64);
-
-  for (i=0; i<128; i+=2)
-    printf("i=%d, x1 = [%d+1i*%d %d+1i*%d; %d+1i*%d %d+1i*%d]; x2 = [%d+1i*%d; %d+1i*%d]; y = [%d+1i*%d; %d+1i*%d]; y_m= round(x1*x2./pow2(15)); y-y_m \n",
-           i,
-           ((short*)x1[0][0])[2*i],  ((short*)x1[0][0])[2*i+2],
-           ((short*)x1[0][1])[2*i],  ((short*)x1[0][1])[2*i+2],
-           ((short*)x1[1][0])[2*i],  ((short*)x1[1][0])[2*i+2],
-           ((short*)x1[1][1])[2*i],  ((short*)x1[1][1])[2*i+2],
-           ((short*)x2[0])[2*i],  ((short*)x2[0])[2*i+1],
-           ((short*)x2[1])[2*i],  ((short*)x2[1])[2*i+1],
-           ((short*)y[0])[2*i],  ((short*)y[0])[2*i+1],
-           ((short*)y[1])[2*i],  ((short*)y[1])[2*i+1]);
-
-  //((int*)y[0])[i],  ((int*)y[0])[i+1],
-  //((int*)y[1])[i],  ((int*)y[1])[i+1]);
-
-}
-
-#endif

openair1/PHY/TOOLS/cmult_vv.c

@@ -50,7 +50,7 @@ int mult_cpx_conj_vector(int16_t *x1,
                          uint32_t N,
                          int output_shift)
 {
-  // Multiply elementwise two complex vectors of N elements with repeated formatted output
+  // Multiply elementwise the complex conjugate of x1 with x2. 
   // x1       - input 1    in the format  |Re0 Im0 Re1 Im1|,......,|Re(N-2)  Im(N-2) Re(N-1) Im(N-1)|
   //            We assume x1 with a dinamic of 15 bit maximum
   //
@@ -90,7 +90,7 @@ int mult_cpx_conj_vector(int16_t *x1,
     tmp_im = _mm_shufflelo_epi16(*x1_128,_MM_SHUFFLE(2,3,0,1));
     tmp_im = _mm_shufflehi_epi16(tmp_im,_MM_SHUFFLE(2,3,0,1));
     tmp_im = _mm_sign_epi16(tmp_im,*(__m128i*)&conjug[0]);
-    tmp_im = _mm_madd_epi16(tmp_im,*x1_128);
+    tmp_im = _mm_madd_epi16(tmp_im,*x2_128);
     tmp_re = _mm_srai_epi32(tmp_re,output_shift);
     tmp_im = _mm_srai_epi32(tmp_im,output_shift);
     tmpy0  = _mm_unpacklo_epi32(tmp_re,tmp_im);
@@ -130,3 +130,4 @@ int mult_cpx_conj_vector(int16_t *x1,
 
   return(0);
 }
+

openair1/PHY/TOOLS/lte_phy_scope.c

@@ -719,13 +719,13 @@ void phy_scope_UE(FD_lte_phy_scope_ue *form,
 
   // PDSCH LLRs
   if (pdsch_llr != NULL) {
-    for (i=0; i<coded_bits_per_codeword/4; i++) {
-      llr[i] = (float) pdsch_llr[4*i];
+    for (i=0; i<coded_bits_per_codeword; i++) {
+      llr[i] = (float) pdsch_llr[i];
       bit[i] = (float) i;
     }
 
-    fl_set_xyplot_xbounds(form->pdsch_llr,0,coded_bits_per_codeword/4);
-    fl_set_xyplot_data(form->pdsch_llr,bit,llr,coded_bits_per_codeword/4,"","","");
+    fl_set_xyplot_xbounds(form->pdsch_llr,0,coded_bits_per_codeword);
+    fl_set_xyplot_data(form->pdsch_llr,bit,llr,coded_bits_per_codeword,"","","");
   }
 
   // PDSCH I/Q of MF Output

openair1/PHY/TOOLS/time_meas.h

@@ -26,6 +26,9 @@
   Address      : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
 
  *******************************************************************************/
+#ifndef __TIME_MEAS_DEFS__H__
+#define __TIME_MEAS_DEFS__H__
+
 #include <unistd.h>
 #include <math.h>
 #include <stdint.h>
@@ -148,3 +151,4 @@ static inline void copy_meas(time_stats_t *dst_ts,time_stats_t *src_ts)
     dst_ts->max=src_ts->max;
   }
 }
+#endif

openair1/PHY/defs.h

@@ -278,6 +278,9 @@ typedef struct PHY_VARS_eNB_s {
   int              **dl_precoder_SeNB[3];
   char             log2_maxp; /// holds the maximum channel/precoder coefficient
 
+  /// if ==0 enables phy only test mode
+  int mac_enabled;
+
   /// For emulation only (used by UE abstraction to retrieve DCI)
   uint8_t num_common_dci[2];                         // num_dci in even/odd subframes
   uint8_t num_ue_spec_dci[2];                         // num_dci in even/odd subframes
@@ -583,6 +586,9 @@ typedef struct {
   /// holds the maximum channel/precoder coefficient
   char             log2_maxp;
 
+  /// if ==0 enables phy only test mode
+  int mac_enabled;
+
   /// Flag to initialize averaging of PHY measurements
   int init_averaging;
 

openair1/SIMULATION/LTE_PHY/dlsim.c

@@ -61,25 +61,7 @@
 extern unsigned int dlsch_tbs25[27][25],TBStable[27][110];
 extern unsigned char offset_mumimo_llr_drange_fix;
 
-#ifdef XFORMS
 #include "PHY/TOOLS/lte_phy_scope.h"
-#endif
-
-
-
-//#define AWGN
-//#define NO_DCI
-
-
-
-//#define ABSTRACTION
-
-/*
-  #define RBmask0 0x00fc00fc
-  #define RBmask1 0x0
-  #define RBmask2 0x0
-  #define RBmask3 0x0
-*/
 
 PHY_VARS_eNB *PHY_vars_eNB;
 PHY_VARS_UE *PHY_vars_UE;
@@ -237,10 +219,9 @@ int main(int argc, char **argv)
   short *uncoded_ber_bit=NULL;
   uint8_t N_RB_DL=25,osf=1;
   frame_t frame_type = FDD;
-#ifdef XFORMS
+  int xforms=0;
   FD_lte_phy_scope_ue *form_ue;
   char title[255];
-#endif
   uint32_t DLSCH_RB_ALLOC = 0x1fff;
   int numCCE=0;
   int dci_length_bytes=0,dci_length=0;
@@ -305,7 +286,7 @@ int main(int argc, char **argv)
   //  num_layers = 1;
   perfect_ce = 0;
 
-  while ((c = getopt (argc, argv, "ahdpZDe:Em:n:o:s:f:t:c:g:r:F:x:y:z:AM:N:I:i:O:R:S:C:T:b:u:v:w:B:PLl:Y")) != -1) {
+  while ((c = getopt (argc, argv, "ahdpZDe:Em:n:o:s:f:t:c:g:r:F:x:y:z:AM:N:I:i:O:R:S:C:T:b:u:v:w:B:PLl:XY")) != -1) {
     switch (c) {
     case 'a':
       awgn_flag = 1;
@@ -557,6 +538,10 @@ int main(int argc, char **argv)
 
       break;
 
+    case 'X':
+      xforms=1;
+      break;
+
     case 'Y':
       perfect_ce=1;
       break;
@@ -636,21 +621,20 @@ int main(int argc, char **argv)
   if ((transmission_mode > 1) && (n_tx != 2))
     printf("n_tx must be >1 for transmission_mode %d\n",transmission_mode);
 
-#ifdef XFORMS
-  fl_initialize (&argc, argv, NULL, 0, 0);
-  form_ue = create_lte_phy_scope_ue();
-  sprintf (title, "LTE PHY SCOPE eNB");
-  fl_show_form (form_ue->lte_phy_scope_ue, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
-
-  if (!dual_stream_UE==0) {
-    openair_daq_vars.use_ia_receiver = 1;
-    fl_set_button(form_ue->button_0,1);
-    fl_set_object_label(form_ue->button_0, "IA Receiver ON");
-    fl_set_object_color(form_ue->button_0, FL_GREEN, FL_GREEN);
+  if (xforms==1) {
+    fl_initialize (&argc, argv, NULL, 0, 0);
+    form_ue = create_lte_phy_scope_ue();
+    sprintf (title, "LTE PHY SCOPE eNB");
+    fl_show_form (form_ue->lte_phy_scope_ue, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
+    
+    if (!dual_stream_UE==0) {
+      openair_daq_vars.use_ia_receiver = 1;
+      fl_set_button(form_ue->button_0,1);
+      fl_set_object_label(form_ue->button_0, "IA Receiver ON");
+      fl_set_object_color(form_ue->button_0, FL_GREEN, FL_GREEN);
+    }
   }
 
-#endif
-
   if (transmission_mode==5) {
     n_users = 2;
     printf("dual_stream_UE=%d\n", dual_stream_UE);
@@ -3496,13 +3480,13 @@ PMI_FEEDBACK:
             //      PHY_vars_UE->dlsch_ue[0][0]->harq_processes[0]->round++;
           }
 
-#ifdef XFORMS
-          phy_scope_UE(form_ue,
-                       PHY_vars_UE,
-                       eNB_id,
-                       0,// UE_id
-                       subframe);
-#endif
+	  if (xforms==1) {
+	    phy_scope_UE(form_ue,
+			 PHY_vars_UE,
+			 eNB_id,
+			 0,// UE_id
+			 subframe);
+	  }
 
         }  //round
 

openair1/SIMULATION/LTE_PHY/mbmssim.c

@@ -173,7 +173,9 @@ int main(int argc, char **argv)
 
   lte_frame_type_t frame_type = FDD;
 
+  uint32_t Nsoft = 1827072;
 
+  /*
 #ifdef XFORMS
   FD_lte_phy_scope_ue *form_ue;
   char title[255];
@@ -183,6 +185,7 @@ int main(int argc, char **argv)
   sprintf (title, "LTE DL SCOPE UE");
   fl_show_form (form_ue->lte_phy_scope_ue, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
 #endif
+  */
 
   logInit();
   number_of_cards = 1;
@@ -382,14 +385,14 @@ int main(int argc, char **argv)
                                 0);
 
   // Create transport channel structures for 2 transport blocks (MIMO)
-  PHY_vars_eNB->dlsch_eNB_MCH = new_eNB_dlsch(1,8,N_RB_DL,0);
+  PHY_vars_eNB->dlsch_eNB_MCH = new_eNB_dlsch(1,8,Nsoft,N_RB_DL,0);
 
   if (!PHY_vars_eNB->dlsch_eNB_MCH) {
     printf("Can't get eNB dlsch structures\n");
     exit(-1);
   }
 
-  PHY_vars_UE->dlsch_ue_MCH[0]  = new_ue_dlsch(1,8,MAX_TURBO_ITERATIONS_MBSFN,N_RB_DL,0);
+  PHY_vars_UE->dlsch_ue_MCH[0]  = new_ue_dlsch(1,8,Nsoft,MAX_TURBO_ITERATIONS_MBSFN,N_RB_DL,0);
 
   PHY_vars_eNB->lte_frame_parms.num_MBSFN_config = 1;
   PHY_vars_eNB->lte_frame_parms.MBSFN_config[0].radioframeAllocationPeriod = 0;

openair1/SIMULATION/LTE_PHY/ulsim.c

@@ -52,9 +52,7 @@
 #include "LAYER2/MAC/vars.h"
 #include "OCG_vars.h"
 
-#ifdef XFORMS
 #include "PHY/TOOLS/lte_phy_scope.h"
-#endif
 
 extern unsigned short dftsizes[33];
 extern short *ul_ref_sigs[30][2][33];
@@ -74,12 +72,9 @@ node_desc_t *ue_data[NUMBER_OF_UE_MAX];
 extern uint16_t beta_ack[16],beta_ri[16],beta_cqi[16];
 //extern  char* namepointer_chMag ;
 
-
-
-#ifdef XFORMS
+int xforms=0;
 FD_lte_phy_scope_enb *form_enb;
 char title[255];
-#endif
 
 /*the following parameters are used to control the processing times*/
 double t_tx_max = -1000000000; /*!< \brief initial max process time for tx */
@@ -204,7 +199,7 @@ int main(int argc, char **argv)
 
   logInit();
 
-  while ((c = getopt (argc, argv, "hapZEbm:n:Y:X:x:s:w:e:q:d:D:O:c:r:i:f:y:c:oA:C:R:g:N:l:S:T:QB:PI:L")) != -1) {
+  while ((c = getopt (argc, argv, "hapZEbm:n:Y:X:x:s:w:e:q:d:D:O:c:r:i:f:y:c:oA:C:R:g:N:l:S:T:QB:PI:LF")) != -1) {
     switch (c) {
     case 'a':
       channel_model = AWGN;
@@ -454,6 +449,10 @@ int main(int argc, char **argv)
       max_turbo_iterations=atoi(optarg);
       break;
 
+    case 'F':
+      xforms=1;
+      break;
+
     case 'Z':
       dump_table = 1;
       break;
@@ -594,12 +593,12 @@ int main(int argc, char **argv)
   }
 
 
-#ifdef XFORMS
-  fl_initialize (&argc, argv, NULL, 0, 0);
-  form_enb = create_lte_phy_scope_enb();
-  sprintf (title, "LTE PHY SCOPE eNB");
-  fl_show_form (form_enb->lte_phy_scope_enb, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
-#endif
+  if (xforms==1) {
+    fl_initialize (&argc, argv, NULL, 0, 0);
+    form_enb = create_lte_phy_scope_enb();
+    sprintf (title, "LTE PHY SCOPE eNB");
+    fl_show_form (form_enb->lte_phy_scope_enb, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
+  }
 
   PHY_vars_UE->lte_ue_pdcch_vars[0]->crnti = 14;
 
@@ -1354,9 +1353,9 @@ int main(int argc, char **argv)
         if ((errs[0]>=100) && (trials>(n_frames/2)))
           break;
 
-#ifdef XFORMS
-        phy_scope_eNB(form_enb,PHY_vars_eNB,0);
-#endif
+	if (xforms==1)
+	  phy_scope_eNB(form_enb,PHY_vars_eNB,0);
+
         /*calculate the total processing time for each packet, get the max, min, and number of packets that exceed t>3000us*/
 
         double t_tx = (double)PHY_vars_UE->phy_proc_tx.p_time/cpu_freq_GHz/1000.0;

openair2/COMMON/commonDef.h

@@ -48,7 +48,19 @@ Description Contains global common definitions
 
 #include <stdint.h>
 #include <stddef.h>
+#include <stdbool.h>
 
+typedef signed char        boolean_t;
+
+#if !defined(TRUE)
+#define TRUE               (boolean_t)0x01
+#endif
+
+#if !defined(FALSE)
+#define FALSE              (boolean_t)0x00
+#endif
+
+#define BOOL_NOT(b) (b^TRUE)
 
 #define NAS_UE_ID_FMT "0x%06x"
 
@@ -59,13 +71,6 @@ Description Contains global common definitions
 #define RETURNok        (0)
 #define RETURNerror     (-1)
 
-#ifndef FALSE
-#define FALSE           (0)
-#endif
-#ifndef TRUE
-#define TRUE            (1)
-#endif
-
 /*
  * Name of the environment variable which defines the default directory
  * where the NAS application is executed and where are located files

openair2/COMMON/s1ap_messages_types.h

@@ -112,7 +112,7 @@ typedef struct net_ip_address_s {
   unsigned ipv4:1;
   unsigned ipv6:1;
   char ipv4_address[16];
-  char ipv6_address[40];
+  char ipv6_address[46];
 } net_ip_address_t;
 
 typedef uint64_t bitrate_t;

openair2/ENB_APP/enb_config.c

@@ -265,7 +265,7 @@ static const eutra_band_t eutra_bands[] = {
 
 Enb_properties_array_t enb_properties;
 
-static void enb_config_display(void)
+void enb_config_display(void)
 {
   int i,j;
 
@@ -1019,7 +1019,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP)
 
               enb_properties.properties[enb_properties_index]->prach_zero_correlation[j] =prach_zero_correlation;
 
-              if ((prach_zero_correlation <0) || (prach_zero_correlation > 63))
+              if ((prach_zero_correlation <0) || (prach_zero_correlation > 15))
                 AssertError (0, parse_errors ++,
                              "Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for prach_zero_correlation choice: 0..15!\n",
                              lib_config_file_name_pP, i, prach_zero_correlation);

openair2/ENB_APP/enb_config.h

@@ -264,6 +264,7 @@ typedef struct Enb_properties_array_s {
   Enb_properties_t    *properties[MAX_ENB];
 } Enb_properties_array_t;
 
+void                          enb_config_display(void);
 const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP);
 
 const Enb_properties_array_t *enb_config_get(void);

openair2/LAYER2/MAC/l1_helpers.c

@@ -47,8 +47,8 @@ int8_t get_Po_NOMINAL_PUSCH(module_id_t module_idP,uint8_t CC_id)
 
   if (CC_id>0) {
     LOG_E(MAC,"Transmission on secondary CCs is not supported yet\n");
-    mac_xface->macphy_exit("MAC FATAL  CC_id>0");
-    return 0; // not reached
+    //mac_xface->macphy_exit("MAC FATAL  CC_id>0");
+    return 0; 
   }
 
   if (UE_mac_inst[module_idP].radioResourceConfigCommon) {
@@ -56,7 +56,8 @@ int8_t get_Po_NOMINAL_PUSCH(module_id_t module_idP,uint8_t CC_id)
   }
   else {
     LOG_E(MAC,"[UE %d] CCid %d FATAL radioResourceConfigCommon is NULL !!!\n",module_idP,CC_id);
-    mac_xface->macphy_exit("FATAL radioResourceConfigCommon is NULL");
+    //mac_xface->macphy_exit("FATAL radioResourceConfigCommon is NULL");
+    return 0;
   }
 
   return(-120 + (rach_ConfigCommon->powerRampingParameters.preambleInitialReceivedTargetPower<<1) +

openair2/LAYER2/RLC/rlc.h

@@ -60,6 +60,8 @@
 #    include "DRB-ToAddModList.h"
 #    include "SRB-ToAddMod.h"
 #    include "SRB-ToAddModList.h"
+#    include "DRB-ToReleaseList.h"
+
 #ifdef Rel10
 #include "PMCH-InfoList-r9.h"
 #endif

openair2/UTIL/OCG/OCG_parse_XML.c

@@ -51,10 +51,6 @@
 #include "UTIL/OPT/opt.h"
 /*----------------------------------------------------------------------------*/
 
-#ifndef HAVE_STRNDUP
-char * strndup (const char *s, size_t size);
-#endif
-
 static int oai_emulation_;  /*!< \brief indicating that the parsing position is now within OAI_Emulation_*/
 
 static int environment_system_config_;    /*!< \brief indicating that the parsing position is now within Envi_Config_*/

openair3/UTILS/conversions.h

@@ -275,7 +275,6 @@ do {                                                    \
     (bITsTRING)->size = 3;                              \
     (bITsTRING)->bits_unused = 4;                       \
 } while(0)
-/*
 /* TS 36.413 v10.9.0 section 9.2.1.38:
  * E-UTRAN CGI/Cell Identity
  * The leftmost bits of the Cell

targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf

@@ -17,7 +17,7 @@ eNBs =
     
     mobile_country_code =  "208";
     
-    mobile_network_code =  "93";
+    mobile_network_code =  "95";
     
        ////////// Physical parameters:
   
@@ -132,7 +132,7 @@ eNBs =
     };
         
     ////////// MME parameters:
-    mme_ip_address      = ( { ipv4       = "192.168.12.171";
+    mme_ip_address      = ( { ipv4       = "192.168.12.62";
                               ipv6       = "192:168:30::17";
                               active     = "yes";
                               preference = "ipv4";