Skip to content

O
OpenXG-RAN
Commit ec69c661 authored by Florian Kaltenberger's avatar Florian Kaltenberger
Browse files
Options

updating config file for band39 exmimo 


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@7585 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 919842b5
Hide whitespace changes
Inline Side-by-side
Showing with 17 additions and 14 deletions
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band39.tm1.exmimo2.conf
View file @ ec69c661
......@@ -19,7 +19,7 @@ eNBs =
mobile_country_code = "208";
mobile_network_code = "92";
mobile_network_code = "93";
////////// Physical parameters:
......@@ -31,6 +31,9 @@ eNBs =
prefix_type = "NORMAL";
eutra_band = 39;
downlink_frequency = 1907600000L;
/*downlink_frequency = 1907601000L; for card 33*/
/*downlink_frequency = 1907602425L; for card 59*/
/*downlink_frequency = 1907599425L; for card 37*/
uplink_frequency_offset = 0;
Nid_cell = 0;
......@@ -38,8 +41,8 @@ eNBs =
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 10;
rx_gain = 10;
tx_gain = 20;
rx_gain = 20;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
......@@ -49,7 +52,7 @@ eNBs =
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -24;
pdsch_referenceSignalPower = -26;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
......@@ -67,9 +70,9 @@ eNBs =
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -95;
pusch_p0_Nominal = -85;
pusch_alpha = "AL1";
pucch_p0_Nominal = -108;
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
......@@ -85,8 +88,8 @@ eNBs =
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 2;
rach_preambleInitialReceivedTargetPower = -104;
rach_preambleTransMax = 6;
rach_preambleInitialReceivedTargetPower = -90;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
......@@ -104,7 +107,7 @@ eNBs =
);
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.13.11";
mme_ip_address = ( { ipv4 = "192.168.12.171";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -114,10 +117,10 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.212/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.212/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......@@ -127,13 +130,13 @@ eNBs =
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="debug";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="debug";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_level ="debug";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment