# Conflicts:
#	ci-scripts/conf_files/gnb.band78.sa.fr1.106PRB.usrpn310.conf
#	openair2/LAYER2/nr_pdcp/nr_pdcp_oai_api.c

# Conflicts:
#	openair1/PHY/MODULATION/slot_fep_nr.c
#	openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
#	openair1/PHY/NR_TRANSPORT/pucch_rx.c
#	openair2/LAYER2/NR_MAC_UE/config_ue.c
#	openair2/LAYER2/NR_MAC_UE/nr_ue_dci_configuration.c
#	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c
#	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_dlsch.c
#	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_uci.c
#	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c

# Conflicts:
#	executables/nr-uesoftmodem.c
#	executables/nr-uesoftmodem.h
#	executables/softmodem-common.h
#	openair2/LAYER2/NR_MAC_UE/mac_proto.h
#	openair2/LAYER2/NR_MAC_UE/nr_ue_procedures.c
#	openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c
#	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c
#	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_uci.c
#	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c

Merge branch 'bandwidth-testing' of https://gitlab.eurecom.fr/oai/openairinterface5g into bandwidth-testing

Conflicts:
	executables/nr-uesoftmodem.c
	executables/nr-uesoftmodem.h
	executables/softmodem-common.h
	openair2/LAYER2/NR_MAC_UE/mac_proto.h
	openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c
	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c
	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_uci.c

Merge branch 'bandwidth-testing' of https://gitlab.eurecom.fr/oai/openairinterface5g into bandwidth-testing

Conflicts:
	executables/nr-uesoftmodem.c
	openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
	openair1/SIMULATION/TOOLS/random_channel.c
	openair2/LAYER2/NR_MAC_UE/mac_proto.h
	openair2/LAYER2/NR_MAC_UE/nr_ue_dci_configuration.c
	openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c
	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c
	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c

The configuration files named "gnb*conf" have been modified.
Other configuration files were left unmodified.

Note: some modifications have been done to the UE too, but for syntactic
reasons. The UE may fail to work, not tested.

For the UE, we have the problem of handling properly SecurityModeCommand.
We don't verify its integrity. This is a bit complicated to handle properly
and may require some API changes in the PDCP layer. So, as of today, the
integrity of this message is not verified.

Also, NSA mode has been touched, but it should not be a problem. But not
tested, so not sure.

Conflicts:
	executables/nr-uesoftmodem.c
	executables/nr-uesoftmodem.h
	executables/softmodem-common.h
	openair1/PHY/MODULATION/slot_fep_nr.c
	openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
	openair1/PHY/NR_TRANSPORT/pucch_rx.c
	openair1/SCHED_NR/fapi_nr_l1.c
	openair1/SCHED_NR_UE/phy_procedures_nr_ue.c
	openair1/SIMULATION/TOOLS/abstraction.c
	openair1/SIMULATION/TOOLS/random_channel.c
	openair2/LAYER2/NR_MAC_UE/mac_proto.h
	openair2/LAYER2/NR_MAC_UE/nr_ue_dci_configuration.c
	openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c
	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c
	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c

MR !1245: [CI] Improve Iperf packet loss mismatch detection
-improve the Iperf packet loss detection and flagging when pl target (from xml) is below the test result

MR !1246: patch: remove call to end_configmodule
- full fix that set properly PARAMFLAG_NOFREE on relevant parameters

MR !1235: Nr msg4 retransmission
-Retransmission of msg4
-Some reworking in UE harq DLSCH processing

MR !1214: NR UE SA
-SIB1 detection part of initial sync at UE
-Removing a lot of hard-coding in SA procedures
-SSB start subcarrier from command line at UE

MR !1243: Nr skip mac pdu processing when nack
-Skipping processing DLSCH MAC PDU at OAI UE when NACK

MR !1229: fix(nr-ue): apply ip rules/route
-Also added 4G RF sim tests

Conflicts:
	executables/nr-uesoftmodem.c
	executables/nr-uesoftmodem.h
	executables/softmodem-common.h
	openair1/PHY/MODULATION/slot_fep_nr.c
	openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
	openair1/PHY/NR_TRANSPORT/pucch_rx.c
	openair1/SCHED_NR/fapi_nr_l1.c
	openair1/SCHED_NR_UE/phy_procedures_nr_ue.c
	openair1/SIMULATION/TOOLS/abstraction.c
	openair1/SIMULATION/TOOLS/random_channel.c
	openair2/LAYER2/NR_MAC_UE/mac_proto.h
	openair2/LAYER2/NR_MAC_UE/nr_ue_dci_configuration.c
	openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c
	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c
	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Merge remote-tracking branch 'origin/NR_skip_mac_pdu_processing_when_nack' into integration_2021_wk35

# Conflicts:
#	executables/nr-uesoftmodem.c
#	executables/nr-uesoftmodem.h
#	executables/softmodem-common.h
#	openair1/PHY/MODULATION/slot_fep_nr.c
#	openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c
#	openair1/SCHED_NR/fapi_nr_l1.c
#	openair1/SCHED_NR_UE/phy_procedures_nr_ue.c
#	openair2/LAYER2/NR_MAC_UE/mac_proto.h
#	openair2/LAYER2/NR_MAC_UE/nr_ue_dci_configuration.c
#	openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c
#	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c
#	openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c

Conflicts:
	openair1/PHY/NR_TRANSPORT/pucch_rx.c
	openair1/PHY/NR_UE_TRANSPORT/pucch_nr.c
	openair1/SIMULATION/NR_PHY/dlsim.c
	openair1/SIMULATION/NR_PHY/pucchsim.c

comment out end_configmodule meanwhile someone verify all parameters that should have PARAMFLAG_NOFREE