Skip to content

O
oai-ran-docker
Commit 8b6350ea authored by LiBingxuan's avatar LiBingxuan
Browse files
Options

add 5g_simulator

parent 506cc886
Hide whitespace changes
Inline Side-by-side
Showing with 1653 additions and 18 deletions
5g_simulator/conf/gnb.sa.band78.106prb.rfsim.conf 0 → 100644
View file @ 8b6350ea
Active_gNBs = ( "gnb-rfsim");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
# cell_type = "CELL_MACRO_GNB";
gNB_name = "gnb-rfsim";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1 }) });
nr_cellid = 12345678L
# tr_s_preference = "local_mac"
////////// Physical parameters:
min_rxtxtime = 6;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3300.60 MHz + 53*12*30e-3 MHz = 3319.68
absoluteFrequencySSB = 621312;
# this is 3300.60 MHz
dl_absoluteFrequencyPointA = 620040;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=106 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 11;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -104;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 5;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ({ ipv4 = "192.168.70.132"; });
NETWORK_INTERFACES :
{
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.71.140";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.71.140";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 200;
# pucch0_dtx_threshold = 150;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
##beamforming 1x4 matrix: 1 layer x 4 antennas
#bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
## beamforming 2x2 matrix:
# bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
## beamforming 4x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
sf_extension = 0
sdr_addrs = "serial=XXXXXXX"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator: {
serveraddr = "server";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
f1ap_log_level ="debug";
};
5g_simulator/conf/gnb2.sa.band78.106prb.rfsim.conf 0 → 100644
View file @ 8b6350ea
Active_gNBs = ( "gnb-rfsim2");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe02;
# cell_type = "CELL_MACRO_GNB";
gNB_name = "gnb-rfsim2";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1 }) });
nr_cellid = 12345678L
# tr_s_preference = "local_mac"
////////// Physical parameters:
min_rxtxtime = 6;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3300.60 MHz + 53*12*30e-3 MHz = 3319.68
absoluteFrequencySSB = 621312;
# this is 3300.60 MHz
dl_absoluteFrequencyPointA = 620040;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=106 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 11;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -104;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 5;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ({ ipv4 = "192.168.70.132"; });
NETWORK_INTERFACES :
{
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.71.141";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.71.141";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 200;
# pucch0_dtx_threshold = 150;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
##beamforming 1x4 matrix: 1 layer x 4 antennas
#bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
## beamforming 2x2 matrix:
# bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
## beamforming 4x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
sf_extension = 0
sdr_addrs = "serial=XXXXXXX"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator: {
serveraddr = "server";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
f1ap_log_level ="debug";
};
5g_simulator/conf/gnb3.sa.band78.106prb.rfsim.conf 0 → 100644
View file @ 8b6350ea
Active_gNBs = ( "gnb-rfsim3");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe03;
# cell_type = "CELL_MACRO_GNB";
gNB_name = "gnb-rfsim3";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1 }) });
nr_cellid = 12345678L
# tr_s_preference = "local_mac"
////////// Physical parameters:
min_rxtxtime = 6;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3300.60 MHz + 53*12*30e-3 MHz = 3319.68
absoluteFrequencySSB = 621312;
# this is 3300.60 MHz
dl_absoluteFrequencyPointA = 620040;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=106 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 11;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -104;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 5;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ({ ipv4 = "192.168.70.132"; });
NETWORK_INTERFACES :
{
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.71.142";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.71.142";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 200;
# pucch0_dtx_threshold = 150;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
##beamforming 1x4 matrix: 1 layer x 4 antennas
#bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
## beamforming 2x2 matrix:
# bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
## beamforming 4x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
sf_extension = 0
sdr_addrs = "serial=XXXXXXX"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator: {
serveraddr = "server";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
f1ap_log_level ="debug";
};
5g_simulator/conf/gnb4.sa.band78.106prb.rfsim.conf 0 → 100644
View file @ 8b6350ea
Active_gNBs = ( "gnb-rfsim4");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe04;
# cell_type = "CELL_MACRO_GNB";
gNB_name = "gnb-rfsim4";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1 }) });
nr_cellid = 12345678L
# tr_s_preference = "local_mac"
////////// Physical parameters:
min_rxtxtime = 6;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3300.60 MHz + 53*12*30e-3 MHz = 3319.68
absoluteFrequencySSB = 621312;
# this is 3300.60 MHz
dl_absoluteFrequencyPointA = 620040;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=106 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 11;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -104;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 5;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ({ ipv4 = "192.168.70.132"; });
NETWORK_INTERFACES :
{
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.71.143";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.71.143";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 200;
# pucch0_dtx_threshold = 150;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
##beamforming 1x4 matrix: 1 layer x 4 antennas
#bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
## beamforming 2x2 matrix:
# bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
## beamforming 4x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
sf_extension = 0
sdr_addrs = "serial=XXXXXXX"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator: {
serveraddr = "server";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
f1ap_log_level ="debug";
};
5g_simulator/conf/gnb5.sa.band78.106prb.rfsim.conf 0 → 100644
View file @ 8b6350ea
Active_gNBs = ( "gnb-rfsim5");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe05;
# cell_type = "CELL_MACRO_GNB";
gNB_name = "gnb-rfsim5";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({ mcc = 001; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1 }) });
nr_cellid = 12345678L
# tr_s_preference = "local_mac"
////////// Physical parameters:
min_rxtxtime = 6;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3300.60 MHz + 53*12*30e-3 MHz = 3319.68
absoluteFrequencySSB = 621312;
# this is 3300.60 MHz
dl_absoluteFrequencyPointA = 620040;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=106 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 11;
initialDLBWPsearchSpaceZero = 0;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 28875;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 12;
preambleReceivedTargetPower = -104;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 5;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// AMF parameters:
amf_ip_address = ({ ipv4 = "192.168.70.132"; });
NETWORK_INTERFACES :
{
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.71.144";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.71.144";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 200;
# pucch0_dtx_threshold = 150;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [78];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
##beamforming 1x2 matrix: 1 layer x 2 antennas
bf_weights = [0x00007fff, 0x0000];
##beamforming 1x4 matrix: 1 layer x 4 antennas
#bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
## beamforming 2x2 matrix:
# bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
## beamforming 4x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
sf_extension = 0
sdr_addrs = "serial=XXXXXXX"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
rfsimulator: {
serveraddr = "server";
};
security = {
# preferred ciphering algorithms
# the first one of the list that an UE supports in chosen
# valid values: nea0, nea1, nea2, nea3
ciphering_algorithms = ( "nea0" );
# preferred integrity algorithms
# the first one of the list that an UE supports in chosen
# valid values: nia0, nia1, nia2, nia3
integrity_algorithms = ( "nia2", "nia0" );
# setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
# what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
drb_ciphering = "yes";
drb_integrity = "no";
};
log_config :
{
global_log_level ="info";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
f1ap_log_level ="debug";
};
5g_simulator/conf/ue.sa.conf 0 → 100644
View file @ 8b6350ea
uicc0 = {
imsi = "001010000000001";
key = "00112233445566778899aabbccddeeff";
opc= "000102030405060708090a0b0c0d0e0f";
dnn= "oai";
nssai_sst=1;
}
5g_simulator/gnb/docker-compose.yaml 0 → 100644
View file @ 8b6350ea
services:
oai-gnb:
image: oai-gnb:bing
container_name: rfsim5g-oai-gnb
cap_drop:
- ALL
environment:
USE_ADDITIONAL_OPTIONS: --sa --rfsim --log_config.global_log_options level,nocolor,time
ASAN_OPTIONS: detect_leaks=0
networks:
public_net:
ipv4_address: 192.168.71.140
volumes:
- ../conf/gnb.sa.band78.106prb.rfsim.conf:/opt/oai-gnb/etc/gnb.conf
healthcheck:
test: /bin/bash -c "pgrep nr-softmodem"
interval: 10s
timeout: 5s
retries: 5
oai-gnb2:
image: oai-gnb:bing
container_name: rfsim5g-oai-gnb2
cap_drop:
- ALL
environment:
USE_ADDITIONAL_OPTIONS: --sa --rfsim --log_config.global_log_options level,nocolor,time
ASAN_OPTIONS: detect_leaks=0
networks:
public_net:
ipv4_address: 192.168.71.141
volumes:
- ../conf/gnb2.sa.band78.106prb.rfsim.conf:/opt/oai-gnb/etc/gnb.conf
healthcheck:
test: /bin/bash -c "pgrep nr-softmodem"
interval: 10s
timeout: 5s
retries: 5
oai-gnb3:
image: oai-gnb:bing
container_name: rfsim5g-oai-gnb3
cap_drop:
- ALL
environment:
USE_ADDITIONAL_OPTIONS: --sa --rfsim --log_config.global_log_options level,nocolor,time
ASAN_OPTIONS: detect_leaks=0
networks:
public_net:
ipv4_address: 192.168.71.142
volumes:
- ../conf/gnb3.sa.band78.106prb.rfsim.conf:/opt/oai-gnb/etc/gnb.conf
healthcheck:
test: /bin/bash -c "pgrep nr-softmodem"
interval: 10s
timeout: 5s
retries: 5
oai-gnb4:
image: oai-gnb:bing
container_name: rfsim5g-oai-gnb4
cap_drop:
- ALL
environment:
USE_ADDITIONAL_OPTIONS: --sa --rfsim --log_config.global_log_options level,nocolor,time
ASAN_OPTIONS: detect_leaks=0
networks:
public_net:
ipv4_address: 192.168.71.143
volumes:
- ../conf/gnb4.sa.band78.106prb.rfsim.conf:/opt/oai-gnb/etc/gnb.conf
healthcheck:
test: /bin/bash -c "pgrep nr-softmodem"
interval: 10s
timeout: 5s
retries: 5
oai-gnb5:
image: oai-gnb:bing
container_name: rfsim5g-oai-gnb5
cap_drop:
- ALL
environment:
USE_ADDITIONAL_OPTIONS: --sa --rfsim --log_config.global_log_options level,nocolor,time
ASAN_OPTIONS: detect_leaks=0
networks:
public_net:
ipv4_address: 192.168.71.144
volumes:
- ../conf/gnb5.sa.band78.106prb.rfsim.conf:/opt/oai-gnb/etc/gnb.conf
healthcheck:
test: /bin/bash -c "pgrep nr-softmodem"
interval: 10s
timeout: 5s
retries: 5
networks:
# public_net:
# external:
# name: demo-oai-public-net
public_net:
driver: bridge
name: demo-oai-gnb-public-net
ipam:
config:
- subnet: 192.168.71.128/26
driver_opts:
com.docker.network.bridge.name: "demo-oai-gnb"
5g_simulator/ue/docker-compose.yaml 0 → 100644
View file @ 8b6350ea
services:
oai-nr-ue:
image: oai-nr-ue:bing
container_name: rfsim5g-oai-nr-ue
cap_drop:
- ALL
cap_add:
- NET_ADMIN # for interface bringup
- NET_RAW # for ping
environment:
USE_ADDITIONAL_OPTIONS: --sa --rfsim -r 106 --numerology 1 -C 3619200000 --rfsimulator.serveraddr 192.168.71.140 --log_config.global_log_options level,nocolor,time
networks:
public_net:
ipv4_address: 192.168.72.150
devices:
- /dev/net/tun:/dev/net/tun
volumes:
- ./conf/ue.sa.conf:/opt/oai-nr-ue/etc/nr-ue.conf
healthcheck:
test: /bin/bash -c "pgrep nr-uesoftmodem"
interval: 10s
timeout: 5s
retries: 5
oai-nr-ue2:
image: oai-nr-ue:bing
container_name: rfsim5g-oai-nr-ue2
cap_drop:
- ALL
cap_add:
- NET_ADMIN # for interface bringup
- NET_RAW # for ping
environment:
USE_ADDITIONAL_OPTIONS: --sa --rfsim -r 106 --numerology 1 --uicc0.imsi 001010000000002 -C 3619200000 --rfsimulator.serveraddr 192.168.71.141 --log_config.global_log_options level,nocolor,time
networks:
public_net:
ipv4_address: 192.168.72.151
devices:
- /dev/net/tun:/dev/net/tun
volumes:
- ./conf/ue.sa.conf:/opt/oai-nr-ue/etc/nr-ue.conf
healthcheck:
test: /bin/bash -c "pgrep nr-uesoftmodem"
interval: 10s
timeout: 5s
retries: 5
oai-nr-ue3:
image: oai-nr-ue:bing
container_name: rfsim5g-oai-nr-ue3
cap_drop:
- ALL
cap_add:
- NET_ADMIN # for interface bringup
- NET_RAW # for ping
environment:
USE_ADDITIONAL_OPTIONS: --sa --rfsim -r 106 --numerology 1 --uicc0.imsi 001010000000003 -C 3619200000 --rfsimulator.serveraddr 192.168.71.142 --log_config.global_log_options level,nocolor,time
networks:
public_net:
ipv4_address: 192.168.72.152
devices:
- /dev/net/tun:/dev/net/tun
volumes:
- ./conf/ue.sa.conf:/opt/oai-nr-ue/etc/nr-ue.conf
healthcheck:
test: /bin/bash -c "pgrep nr-uesoftmodem"
interval: 10s
timeout: 5s
retries: 5
oai-nr-ue4:
image: oai-nr-ue:bing
container_name: rfsim5g-oai-nr-ue4
cap_drop:
- ALL
cap_add:
- NET_ADMIN # for interface bringup
- NET_RAW # for ping
environment:
USE_ADDITIONAL_OPTIONS: --sa --rfsim -r 106 --numerology 1 --uicc0.imsi 001010000000004 -C 3619200000 --rfsimulator.serveraddr 192.168.71.143 --log_config.global_log_options level,nocolor,time
networks:
public_net:
ipv4_address: 192.168.72.153
devices:
- /dev/net/tun:/dev/net/tun
volumes:
- ./conf/ue.sa.conf:/opt/oai-nr-ue/etc/nr-ue.conf
healthcheck:
test: /bin/bash -c "pgrep nr-uesoftmodem"
interval: 10s
timeout: 5s
retries: 5
oai-nr-ue5:
image: oai-nr-ue:bing
container_name: rfsim5g-oai-nr-ue5
cap_drop:
- ALL
cap_add:
- NET_ADMIN # for interface bringup
- NET_RAW # for ping
environment:
USE_ADDITIONAL_OPTIONS: --sa --rfsim -r 106 --numerology 1 --uicc0.imsi 001010000000005 -C 3619200000 --rfsimulator.serveraddr 192.168.71.144 --log_config.global_log_options level,nocolor,time
networks:
public_net:
ipv4_address: 192.168.72.154
devices:
- /dev/net/tun:/dev/net/tun
volumes:
- ./conf/ue.sa.conf:/opt/oai-nr-ue/etc/nr-ue.conf
healthcheck:
test: /bin/bash -c "pgrep nr-uesoftmodem"
interval: 10s
timeout: 5s
retries: 5
networks:
# public_net:
# external:
# name: demo-oai-public-net
public_net:
driver: bridge
name: demo-oai-ue-public-net
ipam:
config:
- subnet: 192.168.72.128/26
driver_opts:
com.docker.network.bridge.name: "demo-oai-ue"
README.md
View file @ 8b6350ea
hello ## 1.构建镜像
### 1.1 构建策略
构建oai ran docker镜像的过程分为三步，先创建``ran-base``镜像（包含所有依赖包），再创建``ran-build``镜像（用于编译目标程序），最后得到``oai-gnb``、``oai-nr-ue``、``oai-cu-up``等目标镜像
或者也可以直接从docker hub上下载官方镜像文件
```shell
docker pull oaisoftwarealliance/oai-gnb:develop
docker pull oaisoftwarealliance/oai-nr-ue:develop
```
### 1.2 文件组织
Dockerfiles的命名规则为：``Dockerfile.${target}.${OS-version}``
### 1.3 构建
首先是构建两个基础镜像ran-base和ran-build
```shell
git clone https://gitee.com/openxg/openxg-ran.git
cd openxg-ran
sudo docker build --target ran-base --tag ran-base:latest --file docker/Dockerfile.base.ubuntu20 .
sudo docker build --target ran-build --tag ran-build:latest --file docker/Dockerfile.build.ubuntu20 .
```
接下来构建目标镜像
```shell
#构建gnb
sudo docker build --target oai-gnb --tag oai-gnb:latest --file docker/Dockerfile.gNB.ubuntu20 .
#构建nr-ue
sudo docker build --target oai-nr-ue --tag oai-nr-ue:latest --file docker/Dockerfile.nrUE.ubuntu20 .
```
## 2. 启动镜像
### 2.1 拓扑图
![tuopu](https://cdn.jsdelivr.net/gh/lidabing1999/image/img/tuopu.png)
在容器跨主机通信的时候需要添加路由
```
sudo route add -net 192.168.70.128 mask 255.255.255.192 gw <远程主机ip>
```
### 2.2 运行
本样例是启动rfsim模式
核心网的启动参考oai5g-cn项目
基站和终端
```shell
git clone http://gitlab.openxg.org.cn/openxg/oai-ran-docker.git
#启动基站
cd oai-ran-docker/5g_simulator/gnb
sudo docker-compose up -d oai-gnb
#启动终端
cd oai-ran-docker/5g_simulator/ue
sudo docker-compose up -d oai-nr-ue
#关闭容器
sudo docker-compose down -t 0
```
### 2.3 验证
```shell
sudo docker exec -it rfsim5g-oai-nr-ue /bin/bash
ping www.baidu.com -I oaitun_ue1
```
如果用网卡且可以ping通百度，则说明系统搭建完成
conf/gnb.sa.band78.106prb.rfsim.conf
View file @ 8b6350ea
...@@ -169,8 +169,8 @@ gNBs = ...@@ -169,8 +169,8 @@ gNBs =
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.70.140"; GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.71.140";
GNB_IPV4_ADDRESS_FOR_NGU = "192.168.70.140"; GNB_IPV4_ADDRESS_FOR_NGU = "192.168.71.140";
GNB_PORT_FOR_S1U = 2152; # Spec 2152 GNB_PORT_FOR_S1U = 2152; # Spec 2152
}; };
......
docker-compose.yaml
View file @ 8b6350ea
...@@ -9,7 +9,7 @@ services: ...@@ -9,7 +9,7 @@ services:
ASAN_OPTIONS: detect_leaks=0 ASAN_OPTIONS: detect_leaks=0
networks: networks:
public_net: public_net:
ipv4_address: 192.168.70.140 ipv4_address: 192.168.71.140
volumes: volumes:
- ./conf/gnb.sa.band78.106prb.rfsim.conf:/opt/oai-gnb/etc/gnb.conf - ./conf/gnb.sa.band78.106prb.rfsim.conf:/opt/oai-gnb/etc/gnb.conf
healthcheck: healthcheck:
...@@ -26,12 +26,12 @@ services: ...@@ -26,12 +26,12 @@ services:
- NET_ADMIN # for interface bringup - NET_ADMIN # for interface bringup
- NET_RAW # for ping - NET_RAW # for ping
environment: environment:
USE_ADDITIONAL_OPTIONS: -E --sa --rfsim -r 106 --numerology 1 -C 3619200000 --rfsimulator.serveraddr 192.168.70.140 --log_config.global_log_options level,nocolor,time USE_ADDITIONAL_OPTIONS: -E --sa --rfsim -r 106 --numerology 1 -C 3619200000 --rfsimulator.serveraddr 192.168.71.140 --log_config.global_log_options level,nocolor,time
depends_on: depends_on:
- oai-gnb - oai-gnb
networks: networks:
public_net: public_net:
ipv4_address: 192.168.70.150 ipv4_address: 192.168.71.150
devices: devices:
- /dev/net/tun:/dev/net/tun - /dev/net/tun:/dev/net/tun
volumes: volumes:
...@@ -50,12 +50,12 @@ services: ...@@ -50,12 +50,12 @@ services:
- NET_ADMIN # for interface bringup - NET_ADMIN # for interface bringup
- NET_RAW # for ping - NET_RAW # for ping
environment: environment:
USE_ADDITIONAL_OPTIONS: -E --sa --rfsim -r 106 --numerology 1 --uicc0.imsi 001010000000002 -C 3619200000 --rfsimulator.serveraddr 192.168.70.140 --log_config.global_log_options level,nocolor,time USE_ADDITIONAL_OPTIONS: -E --sa --rfsim -r 106 --numerology 1 --uicc0.imsi 001010000000002 -C 3619200000 --rfsimulator.serveraddr 192.168.71.140 --log_config.global_log_options level,nocolor,time
depends_on: depends_on:
- oai-gnb - oai-gnb
networks: networks:
public_net: public_net:
ipv4_address: 192.168.70.151 ipv4_address: 192.168.71.151
devices: devices:
- /dev/net/tun:/dev/net/tun - /dev/net/tun:/dev/net/tun
volumes: volumes:
...@@ -74,12 +74,12 @@ services: ...@@ -74,12 +74,12 @@ services:
- NET_ADMIN # for interface bringup - NET_ADMIN # for interface bringup
- NET_RAW # for ping - NET_RAW # for ping
environment: environment:
USE_ADDITIONAL_OPTIONS: -E --sa --rfsim -r 106 --numerology 1 --uicc0.imsi 001010000000003 -C 3619200000 --rfsimulator.serveraddr 192.168.70.140 --log_config.global_log_options level,nocolor,time USE_ADDITIONAL_OPTIONS: -E --sa --rfsim -r 106 --numerology 1 --uicc0.imsi 001010000000003 -C 3619200000 --rfsimulator.serveraddr 192.168.71.140 --log_config.global_log_options level,nocolor,time
depends_on: depends_on:
- oai-gnb - oai-gnb
networks: networks:
public_net: public_net:
ipv4_address: 192.168.70.152 ipv4_address: 192.168.71.152
devices: devices:
- /dev/net/tun:/dev/net/tun - /dev/net/tun:/dev/net/tun
volumes: volumes:
...@@ -98,12 +98,12 @@ services: ...@@ -98,12 +98,12 @@ services:
- NET_ADMIN # for interface bringup - NET_ADMIN # for interface bringup
- NET_RAW # for ping - NET_RAW # for ping
environment: environment:
USE_ADDITIONAL_OPTIONS: -E --sa --rfsim -r 106 --numerology 1 --uicc0.imsi 001010000000004 -C 3619200000 --rfsimulator.serveraddr 192.168.70.140 --log_config.global_log_options level,nocolor,time USE_ADDITIONAL_OPTIONS: -E --sa --rfsim -r 106 --numerology 1 --uicc0.imsi 001010000000004 -C 3619200000 --rfsimulator.serveraddr 192.168.71.140 --log_config.global_log_options level,nocolor,time
depends_on: depends_on:
- oai-gnb - oai-gnb
networks: networks:
public_net: public_net:
ipv4_address: 192.168.70.153 ipv4_address: 192.168.71.153
devices: devices:
- /dev/net/tun:/dev/net/tun - /dev/net/tun:/dev/net/tun
volumes: volumes:
...@@ -122,12 +122,12 @@ services: ...@@ -122,12 +122,12 @@ services:
- NET_ADMIN # for interface bringup - NET_ADMIN # for interface bringup
- NET_RAW # for ping - NET_RAW # for ping
environment: environment:
USE_ADDITIONAL_OPTIONS: -E --sa --rfsim -r 106 --numerology 1 --uicc0.imsi 001010000000005 -C 3619200000 --rfsimulator.serveraddr 192.168.70.140 --log_config.global_log_options level,nocolor,time USE_ADDITIONAL_OPTIONS: -E --sa --rfsim -r 106 --numerology 1 --uicc0.imsi 001010000000005 -C 3619200000 --rfsimulator.serveraddr 192.168.71.140 --log_config.global_log_options level,nocolor,time
depends_on: depends_on:
- oai-gnb - oai-gnb
networks: networks:
public_net: public_net:
ipv4_address: 192.168.70.154 ipv4_address: 192.168.71.154
devices: devices:
- /dev/net/tun:/dev/net/tun - /dev/net/tun:/dev/net/tun
volumes: volumes:
...@@ -143,10 +143,10 @@ networks: ...@@ -143,10 +143,10 @@ networks:
# name: demo-oai-public-net # name: demo-oai-public-net
public_net: public_net:
driver: bridge driver: bridge
name: demo-oai-public-net name: demo-oai-ran-public-net
ipam: ipam:
config: config:
- subnet: 192.168.70.128/26 - subnet: 192.168.71.128/26
driver_opts: driver_opts:
com.docker.network.bridge.name: "demo-oai" com.docker.network.bridge.name: "demo-oai-ran"
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment