Skip to content

O
OpenXG-AMF
Commit f13af891 authored by yangjian's avatar yangjian
Browse files
Options

update amf

parent 4f5a368e
Hide whitespace changes
Inline Side-by-side
Showing with 163 additions and 387 deletions
build/scripts/build_amf
View file @ f13af891
......@@ -190,9 +190,18 @@ function main()
ret=$?;[[ $ret -ne 0 ]] && return $ret
compilations amf amf $OPENAIRCN_DIR/build/amf/build/amf $verbose
ret=$?;[[ $ret -ne 0 ]] && return $ret
if [ ! -d /etc/5gc/config ]; then
$SUDO mkdir -p /etc/5gc/config
fi
$SUDO cp -v $OPENAIRCN_DIR/etc/amf.conf /etc/5gc/config/
$SUDO cp -v $OPENAIRCN_DIR/etc/amf_docker.conf /etc/5gc/config/
# For daemon should not be group writable
$SUDO chmod 755 $OPENAIRCN_DIR/build/amf/build/amf
$SUDO cp -upv $OPENAIRCN_DIR/build/amf/build/amf $INSTALL_DIR && $SUDO chmod 755 $INSTALL_DIR/amf && echo_success "amf installed"
return 0
}
......
build/scripts/！ deleted 100644 → 0
View file @ 4f5a368e
################################################################################
# Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The OpenAirInterface Software Alliance licenses this file to You under
# the OAI Public License, Version 1.1 (the "License"); you may not use this file
# except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.openairinterface.org/?page_id=698
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#-------------------------------------------------------------------------------
# For more information about the OpenAirInterface (OAI) Software Alliance:
# contact@openairinterface.org
################################################################################
# file build_helper.amf
# brief
#
#######################################
################################
# include helper functions
################################
SCRIPT=$(readlink -f ${BASH_SOURCE})
THIS_SCRIPT_PATH=`dirname $SCRIPT`
source $THIS_SCRIPT_PATH/build_helper
source $THIS_SCRIPT_PATH/build_helper.fb_folly
#-------------------------------------------------------------------------------
#arg1 is force (0 or 1) (no interactive script)
#arg2 is debug (0 or 1) (install debug libraries)
install_fmt() {
if [ $1 -eq 0 ]; then
read -p "Do you want to install open-source formatting library for C++ ? <y/N> " prompt
OPTION=""
else
prompt='y'
OPTION="-y"
fi
echo "Install fmt from source"
if [[ $prompt =~ [yY](es)* ]]
then
cd /tmp
echo "Downloading fmt"
$SUDO rm -rf /tmp/fmt*
#git clone https://github.com/fmtlib/fmt.git
git clone http://git.opensource5g.org/openxg/fmt.git
ret=$?;[[ $ret -ne 0 ]] && return $ret
cd fmt
cmake -DFMT_TEST=FALSE .
ret=$?;[[ $ret -ne 0 ]] && return $ret
make -j `nproc`
ret=$?;[[ $ret -ne 0 ]] && return $ret
$SUDO make install
cd /tmp
rm -rf /tmp/fmt*
fi
return 0
}
#-------------------------------------------------------------------------------
#arg1 is force (0 or 1) (no interactive script)
#arg2 is debug (0 or 1) (install debug libraries)
install_spdlog_from_git() {
if [ $1 -eq 0 ]; then
read -p "Do you want to install spdlog ? <y/N> " prompt
OPTION=""
else
prompt='y'
OPTION="-y"
fi
if [ $2 -eq 0 ]; then
debug=0
else
debug=1
fi
if [[ $prompt =~ [yY](es)* ]]
then
#GIT_URL=https://github.com/gabime/spdlog.git
GIT_URL=http://git.opensource5g.org/openxg/spdlog.git
echo "Install spdlog from $GIT_URL"
pushd $OPENAIRCN_DIR/build/ext
echo "Downloading spdlog"
if [[ $OPTION =~ -[yY](es)* ]]
then
$SUDO rm -rf spdlog
fi
git clone $GIT_URL
cd spdlog && git checkout master
ret=$?;[[ $ret -ne 0 ]] && popd && return $ret
# enable syslog, Useless (defined in SMF code)
sed -i '/#define SPDLOG_ENABLE_SYSLOG/s/^\/\///g' include/spdlog/tweakme.h
popd
fi
return 0
}
#-------------------------------------------------------------------------------
#arg1 is force (0 or 1) (no interactive script)
#arg2 is debug (0 or 1) (install debug libraries)
install_pistache_from_git() {
if [ $1 -eq 0 ]; then
read -p "Do you want to install Pistache ? <y/N> " prompt
OPTION="-y"
else
prompt='y'
OPTION="-y"
fi
if [ $2 -eq 0 ]; then
debug=0
else
debug=1
fi
if [[ $prompt =~ [yY](es)* ]]
then
#GIT_URL=https://github.com/oktal/pistache.git
GIT_URL=http://git.opensource5g.org/openxg/pistache.git
echo "Install Pistache from $GIT_URL"
pushd $OPENAIRCN_DIR/build/ext
echo "Downloading Pistache"
if [[ $OPTION =~ -[yY](es)* ]]
then
$SUDO rm -rf pistache
fi
git clone $GIT_URL
git submodule update --init
cd pistache && git checkout e18ed9baeb2145af6f9ea41246cf48054ffd9907
ret=$?;[[ $ret -ne 0 ]] && popd && return $ret
mkdir _build && cd _build
cmake -G "Unix Makefiles" -DCMAKE_BUILD_TYPE=Release ..
ret=$?;[[ $ret -ne 0 ]] && popd && return $ret
make
ret=$?;[[ $ret -ne 0 ]] && popd && return $ret
$SUDO make install
ret=$?;[[ $ret -ne 0 ]] && popd && return $ret
popd
fi
return 0
}
#-------------------------------------------------------------------------------
#arg1 is force (0 or 1) (no interactive script)
#arg2 is debug (0 or 1) (install debug libraries)
install_nlohmann_from_git() {
if [ $1 -eq 0 ]; then
read -p "Do you want to install Nlohmann Json ? <y/N> " prompt
OPTION=""
else
prompt='y'
OPTION="-y"
fi
if [ $2 -eq 0 ]; then
debug=0
else
debug=1
fi
if [[ $prompt =~ [yY](es)* ]]
then
#GIT_URL=https://github.com/nlohmann/json.git
GIT_URL=http://git.opensource5g.org/openxg/json.git
echo "Install Nlohmann Json from $GIT_URL"
pushd $OPENAIRCN_DIR/build/ext
echo "Downloading Nlohmann"
if [[ $OPTION =~ -[yY](es)* ]]
then
$SUDO rm -rf json
fi
git clone $GIT_URL
git submodule update --init
cd json && git checkout master
ret=$?;[[ $ret -ne 0 ]] && popd && return $ret
mkdir _build && cd _build
cmake -G "Unix Makefiles" -DCMAKE_BUILD_TYPE=Release -DJSON_BuildTests=OFF ..
ret=$?;[[ $ret -ne 0 ]] && popd && return $ret
make
ret=$?;[[ $ret -ne 0 ]] && popd && return $ret
$SUDO make install
ret=$?;[[ $ret -ne 0 ]] && popd && return $ret
popd
fi
return 0
}
#-------------------------------------------------------------------------------
#arg1 is force (0 or 1) (no interactive script)
#arg2 is debug (0 or 1) (install debug libraries)
check_install_amf_deps(){
if [ $1 -gt 0 ]; then
OPTION="-y"
else
OPTION=""
fi
if [ $2 -eq 0 ]; then
debug=0
else
debug=1
fi
echo "Check supported distribution"
check_supported_distribution
[[ $? -ne 0 ]] && return $?
# prevent lock on /var/lib/dpkg/lock
if [[ $OS_DISTRO == "ubuntu" ]]; then
#$SUDO systemctl mask apt-daily.service
#$SUDO systemctl mask apt-daily.timer
#$SUDO systemctl mask apt-daily-upgrade.service
#$SUDO systemctl mask apt-daily-upgrade.timer
$SUDO sed -i 's/1/0/g' /etc/apt/apt.conf.d/10periodic
fi
update_package_db
check_enable_epel_repos
# Compilers, generators, ...
if [[ $OS_DISTRO == "ubuntu" ]]; then
PACKAGE_LIST="\
autoconf \
automake \
bison \
build-essential \
cmake \
daemon \
doxygen \
flex \
gdb \
git"
elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
PACKAGE_LIST="\
autoconf \
automake \
bison \
$CMAKE \
doxygen \
flex \
gdb \
git"
else
echo_fatal "$OS_DISTRO is not a supported distribution."
fi
echo "Install build tools"
$SUDO $INSTALLER install $OPTION $PACKAGE_LIST
ret=$?;[[ $ret -ne 0 ]] && return $ret
# Libraries
if [[ $OS_DISTRO == "ubuntu" ]]; then
case "$(get_distribution_release)" in
"ubuntu18.04")
if [ $IS_CONTAINER -eq 0 ]; then
specific_packages="libconfig++-dev libasio-dev libboost-all-dev mysql-server"
else
specific_packages="libconfig++-dev libasio-dev libboost-all-dev"
fi
;;
esac
# removed libspdlog-dev
PACKAGE_LIST="\
$specific_packages \
mysql-server \
mysql-client \
libmysqlclient-dev \
libcpprest-dev \
guile-2.0-dev \
libcurl4-gnutls-dev \
libevent-dev \
libgcrypt11-dev \
libgmp-dev \
libhogweed? \
libidn2-0-dev \
libidn11-dev \
libpthread-stubs0-dev \
libsctp-dev \
libssl-dev \
libtool \
libxml2 \
libxml2-dev \
openssl \
python \
nettle-dev \
libcurl4 \
net-tools \
pkg-config"
elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
PACKAGE_LIST="\
guile-devel \
libconfig-devel \
libgcrypt-devel \
gmp-devel \
libidn2-devel \
libidn-devel \
lksctp-tools \
lksctp-tools-devel \
openssl-devel \
libtool \
libxml2 \
libxml2-devel \
openssl \
check \
python \
pkgconfig"
else
echo_fatal "$OS_DISTRO is not a supported distribution."
fi
echo "Install distro libs"
$SUDO $INSTALLER install $OPTION $PACKAGE_LIST
ret=$?;[[ $ret -ne 0 ]] && return $ret
# Use fmt lib included in spdlog
install_fmt $1
ret=$?;[[ $ret -ne 0 ]] && return $ret
install_spdlog_from_git $1 $2
ret=$?;[[ $ret -ne 0 ]] && return $ret
install_fb_folly_from_source $1 $2
ret=$?;[[ $ret -ne 0 ]] && return $ret
install_pistache_from_git $1 $2
ret=$?;[[ $ret -ne 0 ]] && return $ret
install_nlohmann_from_git $1 $2
ret=$?;[[ $ret -ne 0 ]] && return $ret
$SUDO ldconfig
return 0
}
etc/amf.conf 100755 → 100644
View file @ f13af891
......@@ -21,12 +21,12 @@
AMF =
{
INSTANCE_ID = @INSTANCE@; # 0 is the default
PID_DIRECTORY = "@PID_DIRECTORY@"; # /var/run is the default
INSTANCE_ID = 10; # 0 is the default
PID_DIRECTORY = "/var/run"; # /var/run is the default
AMF_NAME = "OAI-AMF";
RELATIVE_CAPACITY = 30;
RELATIVE_CAPACITY = 50;
# Display statistics about whole system (in seconds)
STATISTICS_TIMER_INTERVAL = 20; # YOUR CONFIG HERE
......@@ -37,20 +37,18 @@ AMF =
GUAMI:
{
MCC = "@MCC@"; MNC = "@MNC@"; RegionID = "@REGION_ID@"; AMFSetID = "@AMF_SET_ID@"; AMFPointer = "1" # YOUR GUAMI CONFIG HERE
MCC = "466"; MNC = "92"; RegionID = "128"; AMFSetID = "4"; AMFPointer = "1" # YOUR GUAMI CONFIG HERE
}
SERVED_GUAMI_LIST = (
{MCC = "@SERVED_GUAMI_MCC_0@"; MNC = "@SERVED_GUAMI_MNC_0@"; RegionID = "@SERVED_GUAMI_REGION_ID_0@"; AMFSetID = "@SERVED_GUAMI_AMF_SET_ID_0@"; AMFPointer = "0"}, #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
{MCC = "@SERVED_GUAMI_MCC_1@"; MNC = "@SERVED_GUAMI_MNC_1@"; RegionID = "@SERVED_GUAMI_REGION_ID_1@"; AMFSetID = "@SERVED_GUAMI_AMF_SET_ID_1@"; AMFPointer = "1"} #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
{MCC = "466"; MNC = "92"; RegionID = "128"; AMFSetID = "4"; AMFPointer = "1"} #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
);
PLMN_SUPPORT_LIST = (
{
MCC = "@PLMN_SUPPORT_MCC@"; MNC = "@PLMN_SUPPORT_MNC@"; TAC = @PLMN_SUPPORT_TAC@; # YOUR PLMN CONFIG HERE
MCC = "466"; MNC = "92"; TAC = 100; # YOUR PLMN CONFIG HERE
SLICE_SUPPORT_LIST = (
{SST = "@SST_0@"; SD = "@SD_0@"}, # YOUR NSSAI CONFIG HERE
{SST = "@SST_1@"; SD = "@SD_1@"} # YOUR NSSAI CONFIG HERE
{SST = "1"; SD = "none"} # YOUR NSSAI CONFIG HERE
)
}
);
......@@ -60,29 +58,29 @@ AMF =
# AMF binded interface for N1/N2 interface (NGAP)
NGAP_AMF:
{
INTERFACE_NAME = "@AMF_INTERFACE_NAME_FOR_NGAP@"; # YOUR NETWORK CONFIG HERE
INTERFACE_NAME = "ens32"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 38412; # YOUR NETWORK CONFIG HERE
PPID = 60; # YOUR NETWORK CONFIG HERE
};
# AMF binded interface for Nausf interface
NAUSF:
# AMF binded interface for Nausf interface
NAUSF:
{
INTERFACE_NAME = "ens33"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 8383; # YOUR NETWORK CONFIG HERE
INTERFACE_NAME = "ens32"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "192.168.199.181/24";
PORT = 8383; # YOUR NETWORK CONFIG HERE
};
# AMF binded interface for N11
N11:
{
INTERFACE_NAME = "@AMF_INTERFACE_NAME_FOR_N11@"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 80; # YOUR NETWORK CONFIG HERE
INTERFACE_NAME = "ens32"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 8282; # YOUR NETWORK CONFIG HERE
SMF_INSTANCES_POOL = (
{SMF_INSTANCE_ID = @SMF_INSTANCE_ID_0@; IPV4_ADDRESS = "@SMF_IPV4_ADDR_0@"; PORT = "80"; VERSION = "@SMF_HTTP_VERSION_0@"; SELECTED = "true"}, # YOUR SMF CONFIG HERE
{SMF_INSTANCE_ID = @SMF_INSTANCE_ID_1@; IPV4_ADDRESS = "@SMF_IPV4_ADDR_1@"; PORT = "80"; VERSION = "@SMF_HTTP_VERSION_1@"; SELECTED = "false"} # YOUR SMF CONFIG HERE
{SMF_INSTANCE_ID = 1; IPV4_ADDRESS = "192.168.199.181"; PORT = "8889"; VERSION = "v1"; SELECTED = "true"}, # YOUR SMF CONFIG HERE
{SMF_INSTANCE_ID = 2; IPV4_ADDRESS = "10.103.238.21"; PORT = "8181"; VERSION = "v1"; SELECTED = "false"} # YOUR SMF CONFIG HERE
);
};
};
......@@ -91,20 +89,20 @@ AMF =
AUTHENTICATION:
{
## MySQL mandatory options
MYSQL_server = "@MYSQL_SERVER@"; # MySQL Server address
MYSQL_user = "@MYSQL_USER@"; # Database server login
MYSQL_pass = "@MYSQL_PASS@"; # Database server password
MYSQL_db = "@MYSQL_DB@"; # Your database name
MYSQL_server = "192.168.199.181"; # MySQL Server address
MYSQL_user = "root"; # Database server login
MYSQL_pass = "123456"; # Database server password
MYSQL_db = "OAI_DB"; # Your database name
## OP
OPERATOR_key = "@OPERATOR_KEY@"; # OP key matching your database
OPERATOR_key = "1006020f0a478bf6b699f15c062e42b3"; # OP key matching your database
RANDOM = "true";
};
NAS:
{
ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "NIA0" , "NIA1" , "NIA2" ];
ORDERED_SUPPORTED_CIPHERING_ALGORITHM_LIST = [ "NEA0" , "NEA1" , "NEA2" ];
ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "NIA1" , "NIA0" , "NIA2" ];
ORDERED_SUPPORTED_CIPHERING_ALGORITHM_LIST = [ "NEA0" , "NEA1" , "NEA2" ];
};
};
......
etc/amf.template 0 → 100755
View file @ f13af891
################################################################################
# Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The OpenAirInterface Software Alliance licenses this file to You under
# the OAI Public License, Version 1.1 (the "License"); you may not use this file
# except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.openairinterface.org/?page_id=698
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#-------------------------------------------------------------------------------
# For more information about the OpenAirInterface (OAI) Software Alliance:
# contact@openairinterface.org
################################################################################
AMF =
{
INSTANCE_ID = @INSTANCE@; # 0 is the default
PID_DIRECTORY = "@PID_DIRECTORY@"; # /var/run is the default
AMF_NAME = "OAI-AMF";
RELATIVE_CAPACITY = 30;
# Display statistics about whole system (in seconds)
STATISTICS_TIMER_INTERVAL = 20; # YOUR CONFIG HERE
CORE_CONFIGURATION:
{
EMERGENCY_SUPPORT = "false";
};
GUAMI:
{
MCC = "@MCC@"; MNC = "@MNC@"; RegionID = "@REGION_ID@"; AMFSetID = "@AMF_SET_ID@"; AMFPointer = "1" # YOUR GUAMI CONFIG HERE
}
SERVED_GUAMI_LIST = (
{MCC = "@SERVED_GUAMI_MCC_0@"; MNC = "@SERVED_GUAMI_MNC_0@"; RegionID = "@SERVED_GUAMI_REGION_ID_0@"; AMFSetID = "@SERVED_GUAMI_AMF_SET_ID_0@"; AMFPointer = "0"}, #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
{MCC = "@SERVED_GUAMI_MCC_1@"; MNC = "@SERVED_GUAMI_MNC_1@"; RegionID = "@SERVED_GUAMI_REGION_ID_1@"; AMFSetID = "@SERVED_GUAMI_AMF_SET_ID_1@"; AMFPointer = "1"} #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
);
PLMN_SUPPORT_LIST = (
{
MCC = "@PLMN_SUPPORT_MCC@"; MNC = "@PLMN_SUPPORT_MNC@"; TAC = @PLMN_SUPPORT_TAC@; # YOUR PLMN CONFIG HERE
SLICE_SUPPORT_LIST = (
{SST = "@SST_0@"; SD = "@SD_0@"}, # YOUR NSSAI CONFIG HERE
{SST = "@SST_1@"; SD = "@SD_1@"} # YOUR NSSAI CONFIG HERE
)
}
);
INTERFACES:
{
# AMF binded interface for N1/N2 interface (NGAP)
NGAP_AMF:
{
INTERFACE_NAME = "@AMF_INTERFACE_NAME_FOR_NGAP@"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 38412; # YOUR NETWORK CONFIG HERE
PPID = 60; # YOUR NETWORK CONFIG HERE
};
# AMF binded interface for Nausf interface
NAUSF:
{
INTERFACE_NAME = "ens33"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 8383; # YOUR NETWORK CONFIG HERE
};
N11:
{
INTERFACE_NAME = "@AMF_INTERFACE_NAME_FOR_N11@"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 80; # YOUR NETWORK CONFIG HERE
SMF_INSTANCES_POOL = (
{SMF_INSTANCE_ID = @SMF_INSTANCE_ID_0@; IPV4_ADDRESS = "@SMF_IPV4_ADDR_0@"; PORT = "80"; VERSION = "@SMF_HTTP_VERSION_0@"; SELECTED = "true"}, # YOUR SMF CONFIG HERE
{SMF_INSTANCE_ID = @SMF_INSTANCE_ID_1@; IPV4_ADDRESS = "@SMF_IPV4_ADDR_1@"; PORT = "80"; VERSION = "@SMF_HTTP_VERSION_1@"; SELECTED = "false"} # YOUR SMF CONFIG HERE
);
};
};
AUTHENTICATION:
{
## MySQL mandatory options
MYSQL_server = "@MYSQL_SERVER@"; # MySQL Server address
MYSQL_user = "@MYSQL_USER@"; # Database server login
MYSQL_pass = "@MYSQL_PASS@"; # Database server password
MYSQL_db = "@MYSQL_DB@"; # Your database name
## OP
OPERATOR_key = "@OPERATOR_KEY@"; # OP key matching your database
RANDOM = "true";
};
NAS:
{
ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "NIA0" , "NIA1" , "NIA2" ];
ORDERED_SUPPORTED_CIPHERING_ALGORITHM_LIST = [ "NEA0" , "NEA1" , "NEA2" ];
};
};
MODULES =
{
NGAP_MESSAGE = (
{MSG_NAME = "NGSetupRequest"; ProcedureCode = 21; TypeOfMessage = "initialMessage"}
);
};
etc/amf_docker.conf 100755 → 100644
View file @ f13af891
......@@ -18,7 +18,6 @@
# For more information about the OpenAirInterface (OAI) Software Alliance:
# contact@openairinterface.org
################################################################################
AMF =
{
INSTANCE_ID = 10; # 0 is the default
......@@ -37,20 +36,18 @@ AMF =
GUAMI:
{
MCC = "220"; MNC = "11"; RegionID = "128"; AMFSetID = "4"; AMFPointer = "1" # YOUR GUAMI CONFIG HERE
MCC = "466"; MNC = "92"; RegionID = "128"; AMFSetID = "4"; AMFPointer = "1" # YOUR GUAMI CONFIG HERE
}
SERVED_GUAMI_LIST = (
#{MCC = "220"; MNC = "11"; RegionID = "10"; AMFSetID = "1"; AMFPointer = "0"} #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
{MCC = "220"; MNC = "11"; RegionID = "128"; AMFSetID = "4"; AMFPointer = "1"} #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
{MCC = "466"; MNC = "92"; RegionID = "128"; AMFSetID = "4"; AMFPointer = "1"} #48bits <MCC><MNC><RegionID><AMFSetID><AMFPointer>
);
PLMN_SUPPORT_LIST = (
{
MCC = "220"; MNC = "11"; TAC = 100; # YOUR PLMN CONFIG HERE
MCC = "466"; MNC = "92"; TAC = 100; # YOUR PLMN CONFIG HERE
SLICE_SUPPORT_LIST = (
{SST = "1"; SD = "none"}, # YOUR NSSAI CONFIG HERE
{SST = "1"; SD = "12"} # YOUR NSSAI CONFIG HERE
{SST = "1"; SD = "none"} # YOUR NSSAI CONFIG HERE
)
}
);
......@@ -69,7 +66,7 @@ AMF =
NAUSF:
{
INTERFACE_NAME = "eth0"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "172.16.200.13/24";
IPV4_ADDRESS = "172.11.200.13/24";
PORT = 8383; # YOUR NETWORK CONFIG HERE
};
......@@ -81,7 +78,7 @@ AMF =
PORT = 8282; # YOUR NETWORK CONFIG HERE
SMF_INSTANCES_POOL = (
{SMF_INSTANCE_ID = 1; IPV4_ADDRESS = "172.16.200.15"; PORT = "8889"; VERSION = "v1"; SELECTED = "true"}, # YOUR SMF CONFIG HERE
{SMF_INSTANCE_ID = 1; IPV4_ADDRESS = "172.11.200.15"; PORT = "8889"; VERSION = "v1"; SELECTED = "true"}, # YOUR SMF CONFIG HERE
{SMF_INSTANCE_ID = 2; IPV4_ADDRESS = "10.103.238.21"; PORT = "8181"; VERSION = "v1"; SELECTED = "false"} # YOUR SMF CONFIG HERE
);
};
......@@ -91,8 +88,8 @@ AMF =
AUTHENTICATION:
{
## MySQL mandatory options
MYSQL_server = "172.16.200.10"; # MySQL Server address
MYSQL_user = "yunshou"; # Database server login
MYSQL_server = "172.11.200.10"; # MySQL Server address
MYSQL_user = "root"; # Database server login
MYSQL_pass = "123456"; # Database server password
MYSQL_db = "OAI_DB"; # Your database name
......@@ -103,7 +100,7 @@ AMF =
NAS:
{
ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "NIA1" , "NIA1" , "NIA1" ];
ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "NIA2" , "NIA1" , "NIA1" ];
ORDERED_SUPPORTED_CIPHERING_ALGORITHM_LIST = [ "NEA0" , "NEA1" , "NEA2" ];
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment