Skip to content

O
OpenXG-SMF
Commit 27426420 authored by chen2022's avatar chen2022
Browse files
Options

Merge branch 'develop' of http://git.opensource5g.org/openxg/smf into develop

parents 7ca69347 19b6e00a
Hide whitespace changes
Inline Side-by-side
Showing with 149 additions and 0 deletions
etc/smf.local.conf 0 → 100644
View file @ 27426420
################################################################################
# Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The OpenAirInterface Software Alliance licenses this file to You under
# the OAI Public License, Version 1.1 (the "License"); you may not use this file
# except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.openairinterface.org/?page_id=698
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#-------------------------------------------------------------------------------
# For more information about the OpenAirInterface (OAI) Software Alliance:
# contact@openairinterface.org
################################################################################
SMF =
{
INSTANCE = 10; # 0 is the default
PID_DIRECTORY = "/var/run"; # /var/run is the default
INTERFACES :
{
N4 :
{
# SMF binded interface for N4 communication (UPF)
INTERFACE_NAME = "lo"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "127.0.0.2/24";
PORT = 8805;
};
SBI :
{
# SMF binded interface for SBI interface (e.g., communication with AMF, UDM)
INTERFACE_NAME = "ens3"; # YOUR NETWORK CONFIG HERE
IPV4_ADDRESS = "read";
PORT = 8889; # YOUR NETWORK CONFIG HERE (default: 80)
HTTP2_PORT = 8890; # YOUR NETWORK CONFIG HERE
API_VERSION = "v2"; # YOUR SMF API VERSION CONFIG HERE
};
};
# Pool of UE assigned IP addresses
# Do not make IP pools overlap
# first IPv4 address X.Y.Z.1 is reserved for GTP network device on UPF
IP_ADDRESS_POOL :
{
#IPV4_LIST = (
#{RANGE = "192.169.0.200 - 192.169.0.253";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
#{RANGE = "12.1.1.129 - 12.1.1.224";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
#{RANGE = "192.169.0.3 - 192.169.255.253";} # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
#);
#IPV6_LIST = (
#{PREFIX = "2001:1:2::/64";}, # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
#{PREFIX = "3001:1:2::/64";}, # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
#);
IPV4_LIST = (
{RANGE = "192.169.0.200 - 192.169.0.253";}, # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
{RANGE = "192.169.0.3 - 192.169.255.253";} # STRING, IPv4 RANGE IP_start - IP_end, YOUR NETWORK CONFIG HERE.
);
IPV6_LIST = (
{PREFIX = "2001:1:2::/64";}, # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
{PREFIX = "3001:1:2::/64";} # STRING, IPv6 prefix, YOUR NETWORK CONFIG HERE.
);
};
DNN_LIST = (
# IPV4_POOL, IPV6_POOL are index in IPV4_LIST, IPV6_LIST, PDU_SESSION_TYPE choice in {IPv4, IPv6, IPv4v6}
{DNN_NI = "IMS"; PDU_SESSION_TYPE = "IPv4v6"; IPV4_POOL = 0; IPV6_POOL = 0},
{DNN_NI = "internet"; PDU_SESSION_TYPE = "IPv4"; IPV4_POOL = 1; IPV6_POOL = -1},
{DNN_NI = "ctnet"; PDU_SESSION_TYPE = "IPv4v6"; IPV4_POOL = 1; IPV6_POOL = 1}
);
# DNS address communicated to UEs
DEFAULT_DNS_IPV4_ADDRESS = "114.114.114.114"; # YOUR DNS CONFIG HERE
DEFAULT_DNS_SEC_IPV4_ADDRESS = "114.114.114.114"; # YOUR DNS CONFIG HERE
DEFAULT_DNS_IPV6_ADDRESS = "2001:4860:4860::8888"; # YOUR DNS CONFIG HERE
DEFAULT_DNS_SEC_IPV6_ADDRESS = "2001:4860:4860::8844"; # YOUR DNS CONFIG HERE
SUPPORT_FEATURES:
{
# STRING, {"yes", "no"},
REGISTER_NRF = "no"; # Set to yes if SMF resgisters to an NRF
DISCOVER_UPF = "no"; # Set to yes to enable UPF discovery and selection
FORCE_PUSH_PROTOCOL_CONFIGURATION_OPTIONS = "no"; # Non standard feature, normally should be set to "no",
# but you may need to set to yes for UE that do not explicitly request a PDN address through NAS signalling
USE_LOCAL_SUBSCRIPTION_INFO = "yes"; # Set to yes if SMF uses local subscription information instead of from an UDM
}
AMF :
{
IPV4_ADDRESS = "192.168.122.124"; # YOUR AMF CONFIG HERE
PORT = 8282; # YOUR AMF CONFIG HERE (default: 80)
API_VERSION = "v2"; # YOUR AMF API VERSION FOR SBI CONFIG HERE
};
UDM :
{
IPV4_ADDRESS = "192.168.2.35"; # YOUR UDM CONFIG HERE
PORT = 8181; # YOUR UDM CONFIG HERE (default: 80)
API_VERSION = "v2"; # YOUR UDM API VERSION FOR SBI CONFIG HERE
};
NRF :
{
IPV4_ADDRESS = "192.168.12.100"; # YOUR NRF CONFIG HERE
PORT = 80; # YOUR NRF CONFIG HERE (default: 80)
API_VERSION = "v1"; # YOUR NRF API VERSION FOR SBI CONFIG HERE
};
UPF_LIST = (
{IPV4_ADDRESS = "127.0.0.3" ;} # YOUR UPF CONFIG HERE
);
LOCAL_CONFIGURATION :
{
# SESSION_MANAGEMENT_SUBSCRIPTION_LIST = (
# { NSSAI_SST = 222, NSSAI_SD = "123", DNN = "default", DEFAULT_SESSION_TYPE = "IPV4", DEFAULT_SSC_MODE = 1,
# QOS_PROFILE_5QI = 6, QOS_PROFILE_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PREEMPTCAP = "NOT_PREEMPT",
#QOS_PROFILE_ARP_PREEMPTVULN = "NOT_PREEMPTABLE", SESSION_AMBR_UL = "20Mbps", SESSION_AMBR_DL = "22Mbps"},
#{ NSSAI_SST = 111; NSSAI_SD = "124", DNN = "oai", DEFAULT_SESSION_TYPE = "IPV4", DEFAULT_SSC_MODE = 1,
#QOS_PROFILE_5QI = 7, QOS_PROFILE_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PREEMPTCAP = "NOT_PREEMPT",
#QOS_PROFILE_ARP_PREEMPTVULN = "NOT_PREEMPTABLE", SESSION_AMBR_UL = "10Mbps", SESSION_AMBR_DL = "11Mbps"}
USE_LOCAL_CONFIGURATION = "yes";
SESSION_MANAGEMENT_SUBSCRIPTION_LIST = (
{ NSSAI_SST = 1, NSSAI_SD = "0", DNN = "IMS", DEFAULT_SESSION_TYPE = "IPV4V6", DEFAULT_SSC_MODE = 1,
QOS_PROFILE_5QI = 5, QOS_PROFILE_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PREEMPTCAP = "NOT_PREEMPT",
QOS_PROFILE_ARP_PREEMPTVULN = "NOT_PREEMPTABLE", SESSION_AMBR_UL = "20Mbps", SESSION_AMBR_DL = "22Mbps"},
{ NSSAI_SST = 1, NSSAI_SD = "0", DNN = "ctnet", DEFAULT_SESSION_TYPE = "IPV4V6", DEFAULT_SSC_MODE = 1,
QOS_PROFILE_5QI = 9, QOS_PROFILE_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PREEMPTCAP = "NOT_PREEMPT",
QOS_PROFILE_ARP_PREEMPTVULN = "NOT_PREEMPTABLE", SESSION_AMBR_UL = "100Mbps", SESSION_AMBR_DL = "110Mbps"},
{ NSSAI_SST = 1; NSSAI_SD = "0", DNN = "internet", DEFAULT_SESSION_TYPE = "IPV4", DEFAULT_SSC_MODE = 1,
QOS_PROFILE_5QI = 9, QOS_PROFILE_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PRIORITY_LEVEL = 1, QOS_PROFILE_ARP_PREEMPTCAP = "NOT_PREEMPT",
QOS_PROFILE_ARP_PREEMPTVULN = "NOT_PREEMPTABLE", SESSION_AMBR_UL = "100Mbps", SESSION_AMBR_DL = "110Mbps"}
);
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment