Updated doc files with IF / FDD features

doc/FEATURE_SET.md

@@ -254,9 +254,11 @@ The NAS layer is based on **3GPP 24.301** and implements the following functions
 The following features are valid for the gNB and the 5G-NR UE.
 
 *  Static TDD, 
+*  FDD
 *  Normal CP
 *  30 kHz subcarrier spacing
 *  Bandwidths up to 80MHz (217 Physical Resource Blocks)
+*  Intermediate downlink and uplink frequencies to interface with IF equipment
 *  Single antenna port (single beam)
 *  Slot format: 14 OFDM symbols in UL or DL
 *  Highly efficient 3GPP compliant LDPC encoder and decoder (BG1 and BG2 supported)

doc/RUNMODEM.md

@@ -132,6 +132,42 @@ With the RF simulator (on the same machine):
 
 `sudo RFSIMULATOR=127.0.0.1 ./nr-uesoftmodem --do-ra --rfsim --parallel-config PARALLEL_SINGLE_THREAD`
 
+## IF setup with OAI
+
+The -C and -CO flags can be used together at UE side to set custom downlink and uplink FR1 intermediate frequencies for the IF equipment.
+
+In order to run this setup, the following flags are needed at the UE side:
+
+`-C` 
+
+`--CO`
+
+and the following parameters must be configured in the RUs section of the gNB configuration file:
+
+`if_freq`
+
+`if_offset`
+
+### Run OAI with custom DL/UL intermediate frequencies
+
+The following example uses DL frequency 2169.080 MHz and UL frequency offset -400 MHz, with a configuration file for band 66 at gNB side.
+
+From the `cmake_targets/ran_build/build` folder:
+
+gNB on machine 1:
+
+`sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band66.tm1.106PRB.usrpx300.conf`
+
+UE on machine 2:
+
+`sudo ./nr-uesoftmodem -C 2169080000 --CO -400000000`
+
+
+
+
+
+
+
 
 [oai wiki home](https://gitlab.eurecom.fr/oai/openairinterface5g/wikis/home)