MR !1028 : oairu
-standalone RRU executable for quick building on simple platforms (no building of L1/L2 procedures) 
-small changes for improving eNB in outdoor deployment scenarios - power control loop, bugfixes, gathering of statistics (L1,MAC,PDCP,RRC), UL measurement procedures, 2/4 antenna reception testing for LTE eNB 
-x300/n300 eNB testing and minor improvements 
-level shifting for x300/n300 
-minimizing L1 variables in MAC 
-removal of RC in RU code sections, minimizing use of RC in L1 code sections

MR !1141 : nr-dmrs-fixes
-NR fixes, identified by UXM tests

MR !1156 : bugfix_gnb_rt_stats_html
-bugfix for 5G NR phy test: the rt report in html shall be displayed only for gNB

MR !1155 : fix-physim-deploy
-The pexpect method has echo issues and is not reliable when we do the polling.
-added a few wait states when pushing the image to the cluster.
-first step also for giving up on remote hosts credentials as the used method implies SSH key authentication.

MR !1146: ci_quectel_support
-Support for quectel module as UE for NSA and Benetel tests
-First step for UE infra / testbench infra as code 

- In case no signal is received then energy of ULSCH is zero,
  the phy_procedures_gNB_uespec_RX will return 1 as an error.

- The TX signal is prepared but not sent which leads to all 0's TX signal.

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

make t_nrPolar_params a constant input to all nr polar encoders and nr polar decoders

MR !1145 NR_FR2_initsync_fixes
-bug fixes that caused failure in PBCH detection after initial sync in FR2

MR !1100 NR_scheduling_request
-per-UE PUCCH F0 resource, CSI, Preamble 
-Scheduling Request 
-MAC scheduler fixes

MR !1150  rh_ci_phy_test_improve
-beautified HTML report for 5G NR phy test

MR !1113 hack-exit-gnb-when-no-enb-nsa
-Exit gNB if connection to eNB failed - to be modified if needed. We may want to try to connect over and over again until we succeed but the modifications to the code to get this behavior are complex

Signed-off-by: Raphael Defosseux <raphael.defosseux@eurecom.fr>

MR #1148 : Fix coreset dmrs idx
 -- Fix coreset dmrs idx for coresets with more than 1 symbol duration

MR #1139 : bugfix for sib1 in case of ssb different from 0
 -- solving a small bug in handling sib1 relative to ssb other than 0

MR #1136 : CI: Migration of the physical-simulators to OpenShift
 -- switch to a parallel pod deployment on the OpenShift Cluster
 -- Huge gain in time : 1h30m down to 25 minutes

MR #1134 : Docker improvements 2021 april
 -- updated the LTE-UE image generation.
    * Proper configuration file in nfapi case
    * Proper entrypoint

MR #1131 : Removing deprecated dl and ul_bwp_dedicated in config request at UE

MR #1091 : Ue pdsch pusch parallel
 -- The UE code for now is unfit to process more than 1 slot in parallel.
    This is why the PUCCH signal is not transmitted most of the time.
    Hence, the following changes are made:

    * Process only one slot at a time. Previously it was 2 slots in parallel.
    * Now we do parallelization with the slot i.e., PUSCH and PDSCH are processed in parallel.
    * Option for the UE to go back to sync mode instead of stopping if it loses sync with gNB. Command line parameter --non-stop enables it.
    * New feature: Included a mechanism to detect false DCIs.

MR #1147 : benetel conf files fix

WIP : Integration 2021 wk17 b

See merge request oai/openairinterface5g!1149