Skip to content

O
OpenXG-RAN
Commit 2702ef2c authored by Dhanuja Elizabeth Thomas's avatar Dhanuja Elizabeth Thomas Committed by Makarand kulkarni
Browse files
Options

Removed identical file for lte-b200-tdd-05mhz-tm2 and reusing existing config file

parent 1dc3b58a
Hide whitespace changes
Inline Side-by-side
Showing with 1 addition and 219 deletions
ci-scripts/conf_files/enb.band40.25prb.usrpb200-tm2.conf deleted 100644 → 0
View file @ 1dc3b58a
Active_eNBs = ( "eNB-in-docker");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB-in-docker";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
////////// Physical parameters:
component_carriers = (
{
node_function = "eNodeB_3GPP";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "TDD";
tdd_config = 1;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 40;
downlink_frequency = 2350000000L;
uplink_frequency_offset = 0000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower =-27;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -106;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "172.21.18.48";
ipv6 = "192:168:30::17";
port = 36412 ;
active = "yes";
preference = "ipv4";
}
);
enable_measurement_reports = "no";
///X2
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "172.21.18.45";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "172.21.18.45";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "172.21.18.45";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
log_config :
{
global_log_level ="debug";
hw_log_level ="info";
phy_log_level ="info";
mac_log_level ="info";
rlc_log_level ="info";
pdcp_log_level ="info";
rrc_log_level ="info";
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
scheduler_mode = "fairRR";
puSch10xSnr = 150;
puCch10xSnr = 150;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 6
att_rx = 6;
bands = [38];
max_pdschReferenceSignalPower = -27;
max_rxgain = 125;
eNB_instances = [0];
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
ci-scripts/yaml_files/lte_b200_tdd_05Mhz_tm2/docker-compose.yml
View file @ 2702ef2c
......@@ -10,7 +10,7 @@ services:
USE_ADDITIONAL_OPTIONS: --RUs.[0].max_rxgain 115 --RUs.[0].nb_tx 2 --RUs.[0].nb_rx 2 --eNBs.[0].component_carriers.[0].nb_antenna_ports 2 --log_config.global_log_options level,nocolor,time,line_num,function
#USE_ADDITIONAL_OPTIONS: --RUs.[0].max_rxgain 115 --RUs.[0].nb_tx 2 --RUs.[0].nb_rx 2 --eNBs.[0].component_carriers.[0].nb_antenna_ports 2 --eNBs.[0].component_carriers.[0].nb_antennas_tx 2 --eNBs.[0].component_carriers.[0].nb_antennas_rx 2 --log_config.global_log_options level,nocolor,time,line_num,function
volumes:
- ../../conf_files/enb.band40.25prb.usrpb200-tm2.conf:/opt/oai-enb/etc/enb.conf
- ../../conf_files/enb.band40.25prb.usrpb200-tm1.conf:/opt/oai-enb/etc/enb.conf
- /dev:/dev
network_mode: "host"
healthcheck:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment