Skip to content

O
OpenXG-RAN
Commit 3fa926e4 authored by Florian Kaltenberger's avatar Florian Kaltenberger
Browse files
Options

Merge branch 'develop' into hotfix-phy_tools

parents 89849444 75602a12
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1881 additions and 48 deletions
openair1/SCHED/phy_procedures_lte_ue.c
View file @ 3fa926e4
......@@ -2678,18 +2678,18 @@ int phy_procedures_UE_RX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstrac
if (ret == (1+phy_vars_ue->dlsch_ue[eNB_id][0]->max_turbo_iterations)) {
phy_vars_ue->dlsch_errors[eNB_id]++;
//#ifdef DEBUG_PHY_PROC
#ifdef DEBUG_PHY_PROC
LOG_D(PHY,"[UE %d][PDSCH %x/%d] Frame %d subframe %d DLSCH in error (rv %d,mcs %d,TBS %d)\n",
phy_vars_ue->Mod_id,phy_vars_ue->dlsch_ue[eNB_id][0]->rnti,
harq_pid,frame_rx,subframe_prev,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->rvidx,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->mcs,
phy_vars_ue->dlsch_ue[eNB_id][0]->harq_processes[harq_pid]->TBS);
// if (abstraction_flag ==0 )
dump_dlsch(phy_vars_ue,eNB_id,subframe_prev,harq_pid);
mac_xface->macphy_exit("");
//#endif
/*
if (abstraction_flag ==0 )
dump_dlsch(phy_vars_ue,eNB_id,subframe_prev,harq_pid);
mac_xface->macphy_exit(""); */
#endif
} else {
LOG_D(PHY,"[UE %d][PDSCH %x/%d] Frame %d subframe %d (slot_rx %d): Received DLSCH (rv %d,mcs %d,TBS %d)\n",
phy_vars_ue->Mod_id,phy_vars_ue->dlsch_ue[eNB_id][0]->rnti,
......
openair2/ENB_APP/enb_config.c
View file @ 3fa926e4
......@@ -1019,7 +1019,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP)
enb_properties.properties[enb_properties_index]->prach_zero_correlation[j] =prach_zero_correlation;
if ((prach_zero_correlation <0) || (prach_zero_correlation > 63))
if ((prach_zero_correlation <0) || (prach_zero_correlation > 15))
AssertError (0, parse_errors ++,
"Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for prach_zero_correlation choice: 0..15!\n",
lib_config_file_name_pP, i, prach_zero_correlation);
......
targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c
View file @ 3fa926e4
......@@ -412,7 +412,7 @@ void calibrate_rf(openair0_device *device) {
bladerf_set_correction(brf->dev,BLADERF_MODULE_TX,BLADERF_CORR_LMS_DCOFF_I,offIold);
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
for (meanIold=meanQold=i=j=0;i<RXDCLENGTH;i++) {
switch (i&3) {
......@@ -438,7 +438,7 @@ void calibrate_rf(openair0_device *device) {
bladerf_set_correction(brf->dev,BLADERF_MODULE_TX,BLADERF_CORR_LMS_DCOFF_I,offI);
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
switch (i&3) {
......@@ -474,7 +474,7 @@ void calibrate_rf(openair0_device *device) {
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
switch (i&3) {
......@@ -503,7 +503,7 @@ void calibrate_rf(openair0_device *device) {
bladerf_set_correction(brf->dev,BLADERF_MODULE_TX,BLADERF_CORR_LMS_DCOFF_Q,offQold);
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
// project on fs/4
for (meanIold=meanQold=i=j=0;i<RXDCLENGTH;i++) {
......@@ -530,7 +530,7 @@ void calibrate_rf(openair0_device *device) {
bladerf_set_correction(brf->dev,BLADERF_MODULE_TX,BLADERF_CORR_LMS_DCOFF_Q,offQ);
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
switch (i&3) {
......@@ -568,7 +568,7 @@ void calibrate_rf(openair0_device *device) {
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
switch (i&3) {
......@@ -601,7 +601,7 @@ void calibrate_rf(openair0_device *device) {
bladerf_set_correction(brf->dev,BLADERF_MODULE_TX,BLADERF_CORR_FPGA_PHASE,offphaseold);
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
// project on fs/8 (Image of TX signal in +ve frequencies)
for (meanIold=meanQold=i=j=0;i<RXDCLENGTH;i++) {
......@@ -618,7 +618,7 @@ void calibrate_rf(openair0_device *device) {
bladerf_set_correction(brf->dev,BLADERF_MODULE_TX,BLADERF_CORR_FPGA_PHASE,offphase);
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
// project on fs/8 (Image of TX signal in +ve frequencies)
for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
......@@ -648,7 +648,7 @@ void calibrate_rf(openair0_device *device) {
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
// project on fs/8 (Image of TX signal in +ve frequencies)
for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
......@@ -670,7 +670,7 @@ void calibrate_rf(openair0_device *device) {
bladerf_set_correction(brf->dev,BLADERF_MODULE_TX,BLADERF_CORR_FPGA_GAIN,offgainold);
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
// project on fs/8 (Image of TX signal in +ve frequencies)
for (meanIold=meanQold=i=j=0;i<RXDCLENGTH;i++) {
......@@ -687,7 +687,7 @@ void calibrate_rf(openair0_device *device) {
bladerf_set_correction(brf->dev,BLADERF_MODULE_TX,BLADERF_CORR_FPGA_GAIN,offgain);
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
// project on fs/8 (Image of TX signal in +ve frequencies)
for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
......@@ -716,7 +716,7 @@ void calibrate_rf(openair0_device *device) {
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
// project on fs/8 (Image of TX signal in +ve frequencies)
for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
......@@ -741,7 +741,7 @@ void calibrate_rf(openair0_device *device) {
bladerf_set_correction(brf->dev,BLADERF_MODULE_RX,BLADERF_CORR_FPGA_PHASE,offphaseold);
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
// project on -3fs/8 (Image of TX signal in -ve frequencies)
for (meanIold=meanQold=i=j=0;i<RXDCLENGTH;i++) {
......@@ -758,7 +758,7 @@ void calibrate_rf(openair0_device *device) {
bladerf_set_correction(brf->dev,BLADERF_MODULE_RX,BLADERF_CORR_FPGA_PHASE,offphase);
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
// project on -3fs/8 (Image of TX signal in -ve frequencies)
for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
......@@ -788,7 +788,7 @@ void calibrate_rf(openair0_device *device) {
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
// project on -3fs/8 (Image of TX signal in -ve frequencies)
for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
......@@ -810,7 +810,7 @@ void calibrate_rf(openair0_device *device) {
bladerf_set_correction(brf->dev,BLADERF_MODULE_RX,BLADERF_CORR_FPGA_GAIN,offgainold);
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0,0);
}
// project on -3fs/8 (Image of TX signal in +ve frequencies)
for (meanIold=meanQold=i=j=0;i<RXDCLENGTH;i++) {
......@@ -827,7 +827,7 @@ void calibrate_rf(openair0_device *device) {
bladerf_set_correction(brf->dev,BLADERF_MODULE_RX,BLADERF_CORR_FPGA_GAIN,offgain);
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
// project on 3fs/8 (Image of TX signal in -ve frequencies)
for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
......@@ -856,7 +856,7 @@ void calibrate_rf(openair0_device *device) {
for (i=0;i<10;i++) {
trx_brf_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0);
trx_brf_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
}
// project on -3fs/8 (Image of TX signal in -ve frequencies)
for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
......@@ -1068,7 +1068,6 @@ int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
bladerf_log_set_verbosity(get_brf_log_level(openair0_cfg->log_level));
printf("BLADERF: Initializing openair0_device\n");
device->priv = brf;
device->Mod_id = num_devices++;
device->type = BLADERF_DEV;
device->trx_start_func = trx_brf_start;
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.50PRB.lmssdr.conf 0 → 100644
View file @ 3fa926e4
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "95";
////////// Physical parameters:
component_carriers = (
{
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 13;
downlink_frequency = 751000000L;
uplink_frequency_offset = 31000000;
Nid_cell = 0;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -20;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.62";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth4";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth4";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.lmssdr.conf 0 → 100644
View file @ 3fa926e4
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "95";
////////// Physical parameters:
component_carriers = (
{
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 13;
downlink_frequency = 751000000L;
uplink_frequency_offset = 31000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -17;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.62";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth4";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth4";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.rrh.usrpb210.conf 0 → 100644
View file @ 3fa926e4
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "95";
////////// Physical parameters:
component_carriers = (
{
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 13;
downlink_frequency = 751000000L;
uplink_frequency_offset = 31000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 100;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -15;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -86;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.62";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
rrh_gw_config = (
{
local_if_name = "eth0";
#remote_address = "169.254.10.158";
#local_address = "169.254.8.15";
remote_address = "74:d4:35:cc:88:45";
local_address = "98:90:96:df:66:07";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "raw";
rf_preference = "usrp_b200";
iq_txshift = 5;
tx_sample_advance = 70;
tx_scheduling_advance = 9;
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth4";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth4";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band13.tm1.usrpb210.conf 0 → 100644
View file @ 3fa926e4
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "95";
////////// Physical parameters:
component_carriers = (
{
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 13;
downlink_frequency = 751000000L;
uplink_frequency_offset = 31000000;
Nid_cell = 0;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 110;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -15;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -100;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "172.27.8.52";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "172.27.8.51/23";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "172.27.8.51/23";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
\ No newline at end of file
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.lmssdr.conf
View file @ 3fa926e4
......@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208";
mobile_network_code = "93";
mobile_network_code = "95";
////////// Physical parameters:
......@@ -132,7 +132,7 @@ eNBs =
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.171";
mme_ip_address = ( { ipv4 = "192.168.12.62";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf
View file @ 3fa926e4
......@@ -150,7 +150,7 @@ rrh_gw_config = (
rrh_gw_active = "yes";
tr_preference = "raw";
rf_preference = "usrp_b200";
iq_txshift = 5;
iq_txshift = 4;
tx_sample_advance = 113;
tx_scheduling_advance = 9;
......@@ -163,8 +163,6 @@ rrh_gw_config = (
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth4";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf
View file @ 3fa926e4
......@@ -133,7 +133,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
mme_ip_address = ( { ipv4 = "192.168.12.170";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -145,14 +145,14 @@ rrh_gw_config = (
local_if_name = "eth0";
#remote_address = "169.254.10.158";
#local_address = "169.254.8.15";
remote_address = "74:d4:35:cc:88:45";
local_address = "98:90:96:df:66:07";
remote_address = "74:d4:35:cc:88:e3";
local_address = "74:d4:35:cc:88:d1";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "raw";
rf_preference = "usrp_b200";
iq_txshift = 5;
iq_txshift = 4;
tx_sample_advance = 70;
tx_scheduling_advance = 9;
......@@ -162,12 +162,11 @@ rrh_gw_config = (
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth4";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.240/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth4";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.240/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf
View file @ 3fa926e4
......@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208";
mobile_network_code = "93";
mobile_network_code = "95";
////////// Physical parameters:
......@@ -28,7 +28,7 @@ eNBs =
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
downlink_frequency = 2685000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
......@@ -133,7 +133,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.11";
mme_ip_address = ( { ipv4 = "172.27.8.52";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -143,10 +143,10 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.212/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "172.27.8.51/23";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.212/24";
ENB_IPV4_ADDRESS_FOR_S1U = "172.27.8.51/23";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
targets/RT/USER/rrh_gw.c
View file @ 3fa926e4
......@@ -299,11 +299,17 @@ static void get_options(int argc, char *argv[]) {
loopback_flag=1;
break;
case 'f':
if (strlen(optarg)<=1024)
strcpy(rf_config_file,optarg);
else {
printf("Configuration filename is too long\n");
exit(-1);
if (optarg){
if ((strcmp("null", optarg) == 0) || (strcmp("NULL", optarg) == 0)) {
printf("no configuration filename is provided\n");
}
else if (strlen(optarg)<=1024){
// rf_config_file = strdup(optarg);
strcpy(rf_config_file,optarg);
}else {
printf("Configuration filename is too long\n");
exit(-1);
}
}
break;
case 't':
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment