Merge remote-tracking branch 'origin/develop' into fhg_shp_phase_noise_est

ci-scripts/Jenkinsfile-gitlab

@@ -66,7 +66,8 @@ pipeline {
             "Test-IF4p5-TDD-Band38-Multi-RRU",
             "Test-eNB-OAI-UE-FDD-Band7",
             "Test-Mono-FDD-Band13-X2-HO",
-            "Test-TDD-Band78-gNB-NR-UE"
+            "Test-TDD-Band78-gNB-NR-UE",
+            "Test-OCP-FDD-Band7"
         ])
         ansiColor('xterm')
     }
@@ -683,6 +684,25 @@ pipeline {
                         }
                     }
                 }
+                stage ("Test OAI OCP-eNB - FDD - Band 7 - B210") {
+                    steps {
+                        script {
+                            triggerSlaveJob ('OCPeNB-FDD-Band7-B210', 'Test-OCP-FDD-Band7')
+                        }
+                    }
+                    post {
+                        always {
+                            script {
+                                finalizeSlaveJob('OCPeNB-FDD-Band7-B210')
+                            }
+                        }
+                        failure {
+                            script {
+                                currentBuild.result = 'FAILURE'
+                            }
+                        }
+                    }
+                }
             }
             post {
                 always {

ci-scripts/cls_cots_ue.py

+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+# Python for CI of OAI-eNB + COTS-UE
+#
+#   Required Python Version
+#     Python 3.x
+#
+#   Required Python Package
+#     pexpect
+#---------------------------------------------------------------------
+
+#to use logging.info()
+import logging
+#to create a SSH object locally in the methods
+import sshconnection
+#time.sleep
+import time
+
+class CotsUe:
+	def __init__(self,model,UEIPAddr,UEUserName,UEPassWord):
+		self.model = model
+		self.UEIPAddr = UEIPAddr 
+		self.UEUserName = UEUserName
+		self.UEPassWord = UEPassWord
+		self.runargs = '' #on of off to toggle airplane mode on/off
+		self.__SetAirplaneRetry = 3
+
+#-----------------$
+#PUBLIC Methods$
+#-----------------$
+
+	def Check_Airplane(self):
+		mySSH = sshconnection.SSHConnection()
+		mySSH.open(self.UEIPAddr, self.UEUserName, self.UEPassWord)
+		status=mySSH.cde_check_value('sudo adb shell settings get global airplane_mode_on ', ['0','1'],5)
+		mySSH.close()
+		return status
+
+
+	def Set_Airplane(self,target_state_str):
+		mySSH = sshconnection.SSHConnection()
+		mySSH.open(self.UEIPAddr, self.UEUserName, self.UEPassWord)
+		mySSH.command('sudo adb start-server','$',5)
+		logging.info("Toggling COTS UE Airplane mode to : "+target_state_str)
+		current_state = self.Check_Airplane()
+		if target_state_str.lower()=="on": 
+			target_state=1
+		else:
+			target_state=0
+		if current_state != target_state:
+			#toggle state
+			retry = 0 
+			while (current_state!=target_state) and (retry < self.__SetAirplaneRetry):
+				mySSH.command('sudo adb shell am start -a android.settings.AIRPLANE_MODE_SETTINGS', '\$', 5)
+				mySSH.command('sudo adb shell input keyevent 20', '\$', 5)
+				mySSH.command('sudo adb shell input tap 968 324', '\$', 5)
+				time.sleep(1)
+				current_state = self.Check_Airplane()
+				retry+=1
+			if current_state != target_state:
+				logging.error("ATTENTION : Could not toggle to : "+target_state_str)
+				logging.error("Current state is : "+ str(current_state))
+		else:
+			print("Airplane mode is already "+ target_state_str)
+		mySSH.command('sudo adb kill-server','$',5)
+		mySSH.close()
+
+
+
+

ci-scripts/conf_files/enb.band17.tm1.25PRB.usrpb210.conf

@@ -105,6 +105,7 @@ eNBs =
       ue_TimersAndConstants_n310			      = 20;
       ue_TimersAndConstants_n311			      = 1;
       ue_TransmissionMode                                    = 1;
+      mbms_dedicated_serving_cell                       = "DISABLE"
 
       //Parameters for SIB18
       rxPool_sc_CP_Len                                       = "normal";

ci-scripts/conf_files/enb.band17.tm1.mbms.25PRB.usrpb210.conf

@@ -105,6 +105,8 @@ eNBs =
       ue_TimersAndConstants_n310			      = 20;
       ue_TimersAndConstants_n311			      = 1;
       ue_TransmissionMode                                    = 1;
+      mbms_dedicated_serving_cell                       = "DISABLE"
+
 
       //Parameters for SIB18
       rxPool_sc_CP_Len                                       = "normal";
@@ -247,7 +249,6 @@ MCEs = (
                           );
 
 
-
             NETWORK_INTERFACES :
             {
                 MCE_INTERFACE_NAME_FOR_M2_ENB            = "lo";
@@ -271,12 +272,12 @@ MCEs = (
                 mcch_update_time = 10;
                 mbms_area_config_list = (
                 {
-                   common_sf_allocation_period = 2; #rf4(0) rf8(1) rf16(2) rf32(3) rf64(4) rf128(5) rf256(6)
+                   common_sf_allocation_period = 1; #rf4(0) rf8(1) rf16(2) rf32(3) rf64(4) rf128(5) rf256(6)
                    mbms_area_id = 0;
                    pmch_config_list = (
                    {
-                        allocated_sf_end=64;
-                        data_mcs=10;
+                        allocated_sf_end=40;
+                        data_mcs=20;
                         mch_scheduling_period = 0; #rf8(0)
                         mbms_session_list = (
                         {
@@ -288,7 +289,7 @@ MCEs = (
                                     mnc_length = 2;
                                 }
                                 service_id=0;
-                                lcid=5; #this must be properly defined lcid:8+service:0 -> rab_id:5
+                                lcid=5; #this must be properly defined lcid:8+service:0 -> rab_id:5 //with new RLC set lcid either 4 or 5
                         }
                         );
                    }
@@ -296,10 +297,10 @@ MCEs = (
 
                    mbms_sf_config_list = (
                    {
-                        radioframe_allocation_period=1; #n1(0) n2(1) n4(2) n8(3) n16(4) n32(5)
+                        radioframe_allocation_period=0; #n1(0) n2(1) n4(2) n8(3) n16(4) n32(5)
                         radioframe_alloocation_offset=0;
                         num_frame="oneFrame";
-                        subframe_allocation=57; #xx100000
+                        subframe_allocation=59; #xx111011 #57; #xx111001
                         //num_frame="fourFrame";
                         //subframe_allocation=14548987; #
                    }

ci-scripts/conf_files/lte-fdd-mbms-basic-sim.conf

@@ -102,6 +102,7 @@ eNBs =
       ue_TimersAndConstants_n310			      = 20;
       ue_TimersAndConstants_n311			      = 1;
       ue_TransmissionMode                                    = 1;
+      mbms_dedicated_serving_cell                       = "DISABLE"
 
       //Parameters for SIB18
       rxPool_sc_CP_Len                                       = "normal";
@@ -295,8 +296,8 @@ MCEs = (
                    pmch_config_list = (
                    {
                         allocated_sf_end=32;
-                        data_mcs=14;
-                        mch_scheduling_period = 0; #rf8(0)
+                        data_mcs=15;
+                        mch_scheduling_period = 0; #rf8(0) rf16(1) rf32(2) rf64(3) rf128(4) rf256(5) rf512(6) rf1024(7)
                         mbms_session_list = (
                         {
                                 #plnm + service_id ->tmgi
@@ -337,7 +338,7 @@ MCEs = (
                 offset                    = 0;
                 modification_period       = 0; #rf512(0; rf1024(1)
                 subframe_allocation_info = 32; #BITSTRING (6bits -> one frame) xx100000
-                mcs                       = 1; #n2(0), n7(1), n13(2), n19(3)
+                mcs                       = 0; #n2(0), n7(1), n13(2), n19(3)
             }
             );
 
@@ -416,3 +417,10 @@ NETWORK_CONTROLLER :
        rrc_log_level                         ="info";
        rrc_log_verbosity                     ="medium";
     };
+
+//rfsimulator :
+//{
+   //options = ("chanmod");
+   //modelname = "AWGN";
+//};
+        

ci-scripts/epc.py

@@ -66,38 +66,6 @@ class EPCManagement():
 		self.MmeIPAddress = ''
 		self.containerPrefix = 'prod'
 
-#-----------------------------------------------------------
-# Setter and Getters on Public Members
-#-----------------------------------------------------------
-
-	def SetIPAddress(self, ipaddress):
-		self.IPAddress = ipaddress
-	def GetIPAddress(self):
-		return self.IPAddress
-	def SetUserName(self, username):
-		self.UserName = username
-	def GetUserName(self):
-		return self.UserName
-	def SetPassword(self, password):
-		self.Password = password
-	def GetPassword(self):
-		return self.Password
-	def SetSourceCodePath(self, sourcecodepath):
-		self.SourceCodePath = sourcecodepath
-	def GetSourceCodePath(self):
-		return self.SourceCodePath
-	def SetType(self, kind):
-		self.Type = kind
-	def GetType(self):
-		return self.Type
-	def SetHtmlObj(self, obj):
-		self.htmlObj = obj
-	def SetTestCase_id(self, idx):
-		self.testCase_id = idx
-	def GetMmeIPAddress(self):
-		return self.MmeIPAddress
-	def SetContainerPrefix(self, prefix):
-		self.containerPrefix = prefix
 
 #-----------------------------------------------------------
 # EPC management functions

ci-scripts/html.py

@@ -82,73 +82,14 @@ class HTMLManagement():
 #-----------------------------------------------------------
 # Setters and Getters
 #-----------------------------------------------------------
-	def SethtmlUEFailureMsg(self,huefa):
-		self.htmlUEFailureMsg = huefa
-	def GethtmlUEFailureMsg(self):
-		return self.htmlUEFailureMsg
-	def SetHmleNBFailureMsg(self, msg):
-		self.htmleNBFailureMsg = msg
-
-	def Setdesc(self, dsc):
-		self.desc = dsc
-
-	def SetstartTime(self, sttime):
-		self.startTime = sttime
-
-	def SettestCase_id(self, tcid):
-		self.testCase_id = tcid
-	def GettestCase_id(self):
-		return self.testCase_id
-
-	def SetranRepository(self, repository):
-		self.ranRepository = repository
-	def SetranAllowMerge(self, merge):
-		self.ranAllowMerge = merge
-	def SetranBranch(self, branch):
-		self.ranBranch = branch
-	def SetranCommitID(self, commitid):
-		self.ranCommitID = commitid
-	def SetranTargetBranch(self, tbranch):
-		self.ranTargetBranch = tbranch
-
+	
 	def SethtmlUEConnected(self, nbUEs):
 		if nbUEs > 0:
 			self.htmlUEConnected = nbUEs
 		else:
 			self.htmlUEConnected = 1
-	def SethtmlNb_Smartphones(self, nbUEs):
-		self.htmlNb_Smartphones = nbUEs
-	def SethtmlNb_CATM_Modules(self, nbUEs):
-		self.htmlNb_CATM_Modules = nbUEs
-
-	def SetnbTestXMLfiles(self, nb):
-		self.nbTestXMLfiles = nb
-	def GetnbTestXMLfiles(self):
-		return self.nbTestXMLfiles
-
-	def SettestXMLfiles(self, xmlFile):
-		self.testXMLfiles.append(xmlFile)
-	def SethtmlTabRefs(self, tabRef):
-		self.htmlTabRefs.append(tabRef)
-	def SethtmlTabNames(self, tabName):
-		self.htmlTabNames.append(tabName)
-	def SethtmlTabIcons(self, tabIcon):
-		self.htmlTabIcons.append(tabIcon)
+	
 
-	def SetOsVersion(self, version, idx):
-		self.OsVersion[idx] = version
-	def SetKernelVersion(self, version, idx):
-		self.KernelVersion[idx] = version
-	def SetUhdVersion(self, version, idx):
-		self.UhdVersion[idx] = version
-	def SetUsrpBoard(self, version, idx):
-		self.UsrpBoard[idx] = version
-	def SetCpuNb(self, nb, idx):
-		self.CpuNb[idx] = nb
-	def SetCpuModel(self, model, idx):
-		self.CpuModel[idx] = model
-	def SetCpuMHz(self, freq, idx):
-		self.CpuMHz[idx] = freq
 
 #-----------------------------------------------------------
 # HTML structure creation functions

ci-scripts/py_params.yaml

+eNBRepository : b
+ranRepository : c
+eNB_AllowMerge : 
+ranAllowMerge : 
+eNBBranch : f
+ranBranch : g
+eNBCommitID :  
+ranCommitID : i
+eNBTargetBranch : j
+ranTargetBranch : k
+
+nodes : 
+  - type : eNB
+    IPAddress : 001.1.1
+    UserName : toto
+    Password : qwe
+    SourceCodePath : l
+  - type : gNB
+    IPAddress : 002.2.2
+    UserName : tata
+    Password : asd
+    SourceCodePath : m  
+  - type : eNB
+    IPAddress : 003.3.3
+    UserName : titi
+    Password : zxc
+    SourceCodePath : n
+  - type : gNB
+    IPAddress : 004.4.4
+    UserName : caca
+    Password : pepe
+    SourceCodePath :  o   
+
+EPCIPAddress : p
+EPCUserName : q
+EPCPassword : r
+EPCSourceCodePath : s
+EPCType : t
+EPCContainerPrefix : u
+
+ADBIPAddress : v
+ADBUserName : w
+ADBType : x
+ADBPassword : y
+
+XMLTestFile : z
+
+UEIPAddress : qqq
+UEUserName : www
+UEPassword : eee
+UESourceCodePath : yyy
+
+finalStatus : bbb
\ No newline at end of file

ci-scripts/py_params_template.yaml

+eNBRepository : b
+ranRepository : c
+eNB_AllowMerge : 
+ranAllowMerge : 
+eNBBranch : f
+ranBranch : g
+eNBCommitID :  
+ranCommitID : i
+eNBTargetBranch : j
+ranTargetBranch : k
+
+
+RAN:
+  RAN_inst_0:
+    name : RAN_1
+    nodes : 
+    - type : eNB
+      IPAddress : 001.1.1
+      UserName : toto
+      Password : qwe
+      SourceCodePath : l
+    - type : gNB
+      IPAddress : 002.2.2
+      UserName : tata
+      Password : asd
+      SourceCodePath : m  
+    - type : eNB
+      IPAddress : 003.3.3
+      UserName : titi
+      Password : zxc
+      SourceCodePath : n
+    - type : gNB
+      IPAddress : 004.4.4
+      UserName : caca
+      Password : pepe
+      SourceCodePath :  o        
+  RAN_inst_1:
+    name : RAN_2
+    nodes : 
+    - type : eNB
+      IPAddress : 101.1.1
+      UserName : toto
+      Password : qwe
+      SourceCodePath : l
+    - type : gNB
+      IPAddress : 102.2.2
+      UserName : zaza
+      Password : asd
+      SourceCodePath : m  
+    - type : eNB
+      IPAddress : 103.3.3
+      UserName : zizi
+      Password : zxc
+      SourceCodePath : n
+    - type : gNB
+      IPAddress : 104.4.4
+      UserName : aaaa
+      Password : pepe
+      SourceCodePath :  o   
+
+
+
+EPC:
+  EPC_inst_0:
+    EPCIPAddress : p
+    EPCUserName : q
+    EPCPassword : r
+    EPCSourceCodePath : s
+    EPCType : t
+    EPCContainerPrefix : u
+
+ADB:
+  ADBIPAddress : v
+  ADBUserName : w
+  ADBType : x
+  ADBPassword : y
+
+
+UE:
+  UE_inst_0:
+    name : UE_1 
+    type :
+    UEIPAddress : qqq  
+    UEUserName : www
+    UEPassword : eee
+    UESourceCodePath : yyy
+  UE_inst_1:
+    name : UE_2
+    type :
+    UEIPAddress : bloblob  
+    UEUserName : gwou
+    UEPassword : zebu
+    UESourceCodePath : pop
+
+
+XMLTestFile : z
+finalStatus : bbb
\ No newline at end of file

ci-scripts/reportTestLocally.sh

@@ -620,6 +620,101 @@ function report_test {
             #IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_ul*client*txt | grep -v mbms 2> /dev/null`
             #analyzeIperfFiles
         done
+
+        # FeMBMS Case
+        CN_CONFIG="noS1"
+        TMODE="fdd"
+        BW_CASES=(05)
+        for BW in ${BW_CASES[@]}
+        do
+            echo "      <tr bgcolor = \"#8FBC8F\" >" >> ./test_simulator_results.html
+            echo "          <td align = \"center\" colspan = 4 >Test FeMBMS without EPC (aka noS1): ${TMODE} -- ${BW}MHz </td>" >> ./test_simulator_results.html
+            echo "      </tr>" >> ./test_simulator_results.html
+            ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_enb_fembms.log
+            UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"`
+            if [ -f $ENB_LOG ] && [ -f $UE_LOG ]
+            then
+                NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
+                NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
+                echo "      <tr>" >> ./test_simulator_results.html
+                echo "        <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
+                echo "        <td>N/A</td>" >> ./test_simulator_results.html
+                #NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG`
+                NB_ENB_TUNNEL_UP=`egrep -c "Interface oaitun_enb1 successfully configured" $ENB_LOG`
+                NB_ENB_MTUNNEL_UP=`egrep -c "Interface oaitun_enm1 successfully configured" $ENB_LOG`
+                #NB_UE_GOT_SYNC=`egrep -c "rfsimulator: Success" $UE_LOG`
+                #NB_ENB_SYNCED_WITH_UE=`egrep -c "Generating RRCConnectionReconfigurationComplete" $UE_LOG`
+                NB_UE_TUNNEL_UP=`egrep -c "Interface oaitun_ue1 successfully configured" $UE_LOG`
+                NB_UE_MTUNNEL_UP=`egrep -c "Interface oaitun_uem1 successfully configured" $UE_LOG`
+                NB_UE_MBMS_PUSH_MSG=`egrep -c "TRIED TO PUSH MBMS DATA TO" $UE_LOG`
+                #if [ $NB_ENB_GOT_SYNC -gt 0 ] && [ $NB_UE_GOT_SYNC -gt 0 ] && [ $NB_ENB_SYNCED_WITH_UE -gt 0 ] && [ $NB_UE_MBMS_PUSH_MSG -gt 0 ]
+                if  [ $NB_UE_MBMS_PUSH_MSG -gt 0 ]
+                then
+                    echo "        <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
+                else
+                    echo "        <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
+                fi
+                echo "        <td><pre>" >> ./test_simulator_results.html
+                #if [ $NB_ENB_GOT_SYNC -gt 0 ]
+                #then
+                #    echo "<font color = \"blue\">- eNB --> got sync</font>" >> ./test_simulator_results.html
+                #else
+                #    echo "<font color = \"red\"><b>- eNB NEVER got sync</b></font>" >> ./test_simulator_results.html
+                #fi
+                if [ $NB_ENB_TUNNEL_UP -gt 0 ]
+                then
+                    echo "<font color = \"blue\">- eNB mounted oaitun_enb1 interface</font>" >> ./test_simulator_results.html
+                else
+                    echo "<font color = \"red\"><b>- eNB NEVER mounted oaitun_enb1 interface</b></font>" >> ./test_simulator_results.html
+                fi
+                if [ $NB_ENB_MTUNNEL_UP -gt 0 ]
+                then
+                    echo "<font color = \"blue\">- eNB mounted oaitun_enm1 interface</font>" >> ./test_simulator_results.html
+                else
+                    echo "<font color = \"red\"><b>- eNB NEVER mounted oaitun_enm1 interface</b></font>" >> ./test_simulator_results.html
+                fi
+                #if [ $NB_UE_GOT_SYNC -gt 0 ]
+                #then
+                #    echo "<font color = \"blue\">- LTE UE --> got sync</font>" >> ./test_simulator_results.html
+                #else
+                #    echo "<font color = \"red\"><b>- LTE UE NEVER got sync</b></font>" >> ./test_simulator_results.html
+                #fi
+                #if [ $NB_ENB_SYNCED_WITH_UE -gt 0 ]
+                #then
+                #    echo "<font color = \"blue\">- LTE UE attached to eNB</font>" >> ./test_simulator_results.html
+                #else
+                #    echo "<font color = \"red\"><b>- LTE UE NEVER attached to eNB</b></font>" >> ./test_simulator_results.html
+                #fi
+                if [ $NB_UE_TUNNEL_UP -gt 0 ]
+                then
+                    echo "<font color = \"blue\">- LTE UE mounted oaitun_ue1 interface</font>" >> ./test_simulator_results.html
+                else
+                    echo "<font color = \"red\"><b>- LTE UE NEVER mounted oaitun_ue1 interface</b></font>" >> ./test_simulator_results.html
+                fi
+                if [ $NB_UE_MTUNNEL_UP -gt 0 ]
+                then
+                    echo "<font color = \"blue\">- LTE UE mounted oaitun_uem1 interface</font>" >> ./test_simulator_results.html
+                else
+                    echo "<font color = \"red\"><b>- LTE UE NEVER mounted oaitun_uem1 interface</b></font>" >> ./test_simulator_results.html
+                fi
+                if [ $NB_UE_MBMS_PUSH_MSG -gt 0 ]
+                then
+                    echo "<font color = \"blue\">- LTE UE tried to push ${NB_UE_MBMS_PUSH_MSG} MBMS DATA</font>" >> ./test_simulator_results.html
+                else
+                    echo "<font color = \"red\"><b>- LTE UE NEVER pushed MBMS DATA</b></font>" >> ./test_simulator_results.html
+                fi
+                echo "        </pre></td>" >> ./test_simulator_results.html
+                echo "      </tr>" >> ./test_simulator_results.html
+            fi
+            #PING_LOGS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_ping*.log 2> /dev/null`
+            #analyzePingFiles
+
+            #IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl*client*txt | grep -v mbms 2> /dev/null`
+            #analyzeIperfFiles
+
+            #IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_ul*client*txt | grep -v mbms 2> /dev/null`
+            #analyzeIperfFiles
+        done
         echo "   </table>" >> ./test_simulator_results.html
         echo "   </div>" >> ./test_simulator_results.html
 

ci-scripts/runTestOnVM.sh

@@ -2050,6 +2050,95 @@ function run_test_on_vm {
             echo "LTE RFSIM seems to FAIL"
             echo "LTE: TEST_KO" > $ARCHIVES_LOC/test_final_status.log
         fi
+
+        ####################
+        ## FeMBMS CASE noS1 ##
+        ####################
+        CONF_FILE=lte-fdd-fembms-basic-sim.conf
+        CN_CONFIG="noS1"
+        S1_NOS1_CFG=0
+        LTEBOX=0
+        TMODE="fdd"
+        FREQUENCY=2680
+        BW_CASES=(05)
+        FeMBMS_STATUS=0
+
+        for BW in ${BW_CASES[@]}
+        do
+            if [[ $BW =~ .*05.* ]]; then PRB=25; fi
+            if [[ $BW =~ .*10.* ]]; then PRB=50; fi
+            if [[ $BW =~ .*20.* ]]; then PRB=100; fi
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : Starting the eNB with MSMS in ${TMODE}-${BW}MHz mode"
+            echo "############################################################"
+            CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_enb_fembms.log
+            start_rf_sim_enb $ENB_VM_CMDS "$ENB_VM_IP_ADDR" "$EPC_VM_IP_ADDR" $CURRENT_ENB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : Starting the UE"
+            echo "############################################################"
+            CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ue_fembms.log
+            start_rf_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 1
+            if [ $UE_SYNC -eq 0 ]
+            then
+                echo "Problem w/ eNB and UE not syncing"
+                terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
+                terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
+                scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
+                scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
+                STATUS=-1
+                break
+            fi
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : iperf DL -- UE is server and eNB is client"
+            echo "############################################################"
+            get_enb_mbms_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
+            IPERF_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl_fembms
+            get_ue_mbms_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
+            THROUGHPUT=2
+            generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE 1 0
+            scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
+            scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
+            #check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : Terminate enb/ue simulators"
+            echo "############################################################"
+            terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
+            terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
+            scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
+            scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
+            NB_UE_FeMBMS_MESSAGES=`egrep -c "TRIED TO PUSH MBMS DATA TO" $ARCHIVES_LOC/$CURRENT_UE_LOG_FILE`
+            if [ $NB_UE_FeMBMS_MESSAGES -eq 0 ]; then FeMBMS_STATUS=-1; fi
+
+        done
+
+        full_l2_sim_destroy
+
+        echo "############################################################"
+        echo "Checking run status"
+        echo "############################################################"
+
+        if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
+        if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
+        if [ $FeMBMS_STATUS -eq 0 ]
+        then
+            echo "LTE FeMBMS RFSIM seems OK"
+        else
+            echo "LTE FeMBMS RFSIM seems to FAIL"
+            STATUS=-1
+        fi
+        if [ $STATUS -eq 0 ]
+        then
+            echo "LTE RFSIM seems OK"
+            echo "LTE: TEST_OK" > $ARCHIVES_LOC/test_final_status.log
+        else
+            echo "LTE RFSIM seems to FAIL"
+            echo "LTE: TEST_KO" > $ARCHIVES_LOC/test_final_status.log
+        fi
+
     fi
 
     if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]

ci-scripts/sshconnection.py

@@ -101,6 +101,18 @@ class SSHConnection():
 		else:
 			sys.exit('SSH Connection Failed')
 
+
+
+
+	def cde_check_value(self, commandline, expected, timeout):
+		logging.debug(commandline)
+		self.ssh.timeout = timeout
+		self.ssh.sendline(commandline)
+		expected.append(pexpect.EOF)
+		expected.append(pexpect.TIMEOUT)
+		self.sshresponse = self.ssh.expect(expected)
+		return self.sshresponse
+
 	def command(self, commandline, expectedline, timeout):
 		logging.debug(commandline)
 		self.ssh.timeout = timeout

ci-scripts/xml_class_list.yml

+  - COTS_UE_Airplane
+  - Build_PhySim
+  - Run_PhySim
+  - Build_eNB
+  - WaitEndBuild_eNB
+  - Initialize_eNB
+  - Terminate_eNB
+  - Initialize_UE
+  - Terminate_UE
+  - Attach_UE
+  - Detach_UE
+  - Build_OAI_UE
+  - Initialize_OAI_UE
+  - Terminate_OAI_UE
+  - DataDisable_UE
+  - DataEnable_UE
+  - CheckStatusUE
+  - Ping
+  - Iperf
+  - Reboot_UE
+  - Initialize_FlexranCtrl
+  - Terminate_FlexranCtrl
+  - Initialize_HSS
+  - Terminate_HSS
+  - Initialize_MME
+  - Terminate_MME
+  - Initialize_SPGW
+  - Terminate_SPGW
+  - Initialize_CatM_module
+  - Terminate_CatM_module
+  - Attach_CatM_module
+  - Detach_CatM_module
+  - Ping_CatM_module
+  - IdleSleep
+  - Perform_X2_Handover

ci-scripts/xml_files/enb_ocp_usrp210_band7_test_05mhz_tm1.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-05-tm1</htmlTabRef>
+	<htmlTabName>Test-05MHz-TM1</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<repeatCount>4</repeatCount>
+	<TestCaseRequestedList>
+ 030201
+ 040101
+ 030101 040301 040501 040603 040604 040605 040606 040607 040641 040642 040643 040644 040401 040201 030201
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="030101">
+		<class>Initialize_eNB</class>
+		<desc>Initialize OCP-eNB (FDD/Band7/5MHz)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf</Initialize_eNB_args>
+		<air_interface>ocp</air_interface>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate OCP-eNB</desc>
+		<air_interface>ocp</air_interface>
+	</testCase>
+
+	<testCase id="040101">
+		<class>Initialize_UE</class>
+		<desc>Initialize UE</desc>
+	</testCase>
+
+	<testCase id="040201">
+		<class>Terminate_UE</class>
+		<desc>Terminate UE</desc>
+	</testCase>
+
+	<testCase id="040301">
+		<class>Attach_UE</class>
+		<desc>Attach UE</desc>
+	</testCase>
+
+	<testCase id="040401">
+		<class>Detach_UE</class>
+		<desc>Detach UE</desc>
+	</testCase>
+
+	<testCase id="040501">
+		<class>Ping</class>
+		<desc>ping (5MHz - 20 sec)</desc>
+		<ping_args>-c 20</ping_args>
+		<ping_packetloss_threshold>5</ping_packetloss_threshold>
+	</testCase>
+
+	<testCase id="040603">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040604">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040605">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(unbalanced profile)</desc>
+		<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>unbalanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040606">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040607">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040641">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+	<testCase id="040642">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040643">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/TCP)(30 sec)(single-ue profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>single-ue</iperf_profile>
+	</testCase>
+
+	<testCase id="040644">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - UL/TCP)(30 sec)(balanced profile)</desc>
+		<iperf_args>-t 30 -i 1 -fm -R</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_profile>balanced</iperf_profile>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/enb_ocp_usrp210_build.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>build-tab</htmlTabRef>
+	<htmlTabName>Build</htmlTabName>
+	<htmlTabIcon>wrench</htmlTabIcon>
+	<TestCaseRequestedList>
+ 010101
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="010101">
+		<class>Build_eNB</class>
+		<desc>Build eNB OCP (USRP)</desc>
+		<Build_eNB_args>-w USRP -c --eNBocp --ninja</Build_eNB_args>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/enb_ue_usrp210_band7_test_05mhz_tm1_fembms_no_s1.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-05-tm1-fembms-nos1-tunnel</htmlTabRef>
+	<htmlTabName>Test-05MHz-FEMBMS-TM1-noS1-tunnel</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<repeatCount>2</repeatCount>
+	<TestCaseRequestedList>
+ 030201 090109
+ 030104 000001 090104 000002 040605 000001 090109 030201
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="000001">
+		<class>IdleSleep</class>
+		<desc>Sleep</desc>
+		<idle_sleep_time_in_sec>10</idle_sleep_time_in_sec>
+	</testCase>
+
+	<testCase id="000002">
+		<class>IdleSleep</class>
+		<desc>Sleep</desc>
+		<idle_sleep_time_in_sec>15</idle_sleep_time_in_sec>
+	</testCase>
+
+	<testCase id="000003">
+		<class>IdleSleep</class>
+		<desc>Sleep</desc>
+		<idle_sleep_time_in_sec>60</idle_sleep_time_in_sec>
+	</testCase>
+
+	<testCase id="030104">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB (FDD/Band7/5MHz/MBMS)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band17.tm1.mbms.25PRB.usrpb210.conf --noS1 --eNBs.[0].rrc_inactivity_threshold 0 --nokrnmod 1 --eNBs.[0].component_carriers.[0].eutra_band 7 --eNBs.[0].component_carriers.[0].downlink_frequency 2680000000 --eNBs.[0].component_carriers.[0].uplink_frequency_offset -120000000 --eNBs.[0].component_carriers.[0].mbms_dedicated_serving_cell ENABLE --MCEs.[0].mbms_sched_info.mbms_area_config_list.[0].pmch_config_list.[0].allocated_sf_end 512</Initialize_eNB_args>
+	</testCase>
+
+	<testCase id="030201">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+	</testCase>
+
+	<testCase id="090104">
+		<class>Initialize_OAI_UE</class>
+		<desc>Initialize OAI UE (FDD/Band7/5MHz/MBMS)</desc>
+		<Initialize_OAI_UE_args>-C 2680000000 -r 25 --ue-rxgain 120 --ue-txgain 0 --ue-max-power 0 --ue-scan-carrier --nokrnmod 1 --noS1</Initialize_OAI_UE_args>
+	</testCase>
+
+	<testCase id="090109">
+		<class>Terminate_OAI_UE</class>
+		<desc>Terminate OAI UE</desc>
+	</testCase>
+
+	<testCase id="040605">
+		<class>Iperf</class>
+		<desc>iperf (5MHz - DL/1.5Mbps/UDP/MBMS-sink)(20 sec)</desc>
+		<iperf_args>-c 10.0.2.2 -u -b 1.5M -t 20 -i 1 -fm -B 10.0.2.1</iperf_args>
+		<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
+		<iperf_options>sink</iperf_options>
+	</testCase>
+
+</testCaseList>

ci-scripts/xml_files/fr1_multi_node_build.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>build-tab</htmlTabRef>
+	<htmlTabName>Build</htmlTabName>
+	<htmlTabIcon>wrench</htmlTabIcon>
+	<TestCaseRequestedList>
+ 000001 000002
+ 000003 000004
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="000001">
+		<class>Build_eNB</class>
+		<desc>Build eNB</desc>
+		<Build_eNB_args>-w USRP -c --eNB --ninja</Build_eNB_args>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+		<backgroundBuild>True</backgroundBuild>
+	</testCase>
+
+	<testCase id="000004">
+		<class>WaitEndBuild_eNB</class>
+		<desc>Wait for end of Build eNB</desc>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+	</testCase>
+
+	<testCase id="000002">
+		<class>Build_eNB</class>
+		<desc>Build gNB</desc>
+		<Build_eNB_args>-w USRP -c --gNB --ninja</Build_eNB_args>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+		<backgroundBuild>True</backgroundBuild>
+	</testCase>
+
+	<testCase id="000003">
+		<class>WaitEndBuild_eNB</class>
+		<desc>Wait for end of Build gNB</desc>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+	</testCase>
+
+
+</testCaseList>

ci-scripts/xml_files/fr1_multi_node_terminate.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-fr1-tm1</htmlTabRef>
+	<htmlTabName>Test-FR1-TM1</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<repeatCount>1</repeatCount>
+	<TestCaseRequestedList>
+ 070001
+ 070000
+	</TestCaseRequestedList>
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="070000">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+	</testCase>
+
+	<testCase id="070001">
+		<class>Terminate_eNB</class>
+		<desc>Terminate gNB</desc>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+	</testCase>
+
+</testCaseList>
+

ci-scripts/xml_files/fr1_multi_node_test.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-fr1-tm1</htmlTabRef>
+	<htmlTabName>Test-FR1-TM1</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<repeatCount>1</repeatCount>
+	<TestCaseRequestedList>
+ 030000
+ 040000
+ 000001
+ 070001
+ 070000
+	</TestCaseRequestedList>
+	<TestCaseExclusionList>
+	</TestCaseExclusionList>
+
+	<testCase id="030000">
+		<class>Initialize_eNB</class>
+		<desc>Initialize eNB</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/enb.band7.tm1.fr1.25PRB.usrpb210.conf</Initialize_eNB_args>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+		<air_interface>lte</air_interface>
+	</testCase>
+
+	<testCase id="040000">
+		<class>Initialize_eNB</class>
+		<desc>Initialize gNB (3/4 sampling rate)</desc>
+		<Initialize_eNB_args>-O ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf -E</Initialize_eNB_args>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+		<air_interface>nr</air_interface>
+	</testCase>
+
+	<testCase id="000001">
+		<class>IdleSleep</class>
+		<desc>Sleep</desc>
+		<idle_sleep_time_in_sec>30</idle_sleep_time_in_sec>
+	</testCase>
+
+	<testCase id="070000">
+		<class>Terminate_eNB</class>
+		<desc>Terminate eNB</desc>
+		<eNB_instance>0</eNB_instance>
+		<eNB_serverId>0</eNB_serverId>
+	</testCase>
+
+	<testCase id="070001">
+		<class>Terminate_eNB</class>
+		<desc>Terminate gNB</desc>
+		<eNB_instance>1</eNB_instance>
+		<eNB_serverId>1</eNB_serverId>
+	</testCase>
+
+</testCaseList>
+

ci-scripts/xml_files/fr1_toggle_cots_ue.xml

+<!--
+
+ Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ contributor license agreements.  See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The OpenAirInterface Software Alliance licenses this file to You under
+ the OAI Public License, Version 1.1  (the "License"); you may not use this file
+ except in compliance with the License.
+ You may obtain a copy of the License at
+
+      http://www.openairinterface.org/?page_id=698
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ For more information about the OpenAirInterface (OAI) Software Alliance:
+      contact@openairinterface.org
+
+-->
+<testCaseList>
+	<htmlTabRef>test-airplane-mode</htmlTabRef>
+	<htmlTabName>AirplaneToggle</htmlTabName>
+	<htmlTabIcon>tasks</htmlTabIcon>
+	<TestCaseRequestedList>
+ 010000
+	</TestCaseRequestedList>
+	<TestCaseExclusionList></TestCaseExclusionList>
+
+	<testCase id="010000">
+		<class>COTS_UE_Airplane</class>
+		<desc>Toggle COTS Airplane mode ON</desc>
+		<cots_ue_airplane_args>ON</cots_ue_airplane_args>
+	</testCase>
+
+
+</testCaseList>

ci-scripts/xml_files/gnb_usrp_build.xml

@@ -34,7 +34,7 @@
 		<mode>TesteNB</mode>	
 		<class>Build_eNB</class>
 		<desc>Build gNB (USRP)</desc>
-		<Build_eNB_args>--gNB -w USRP</Build_eNB_args>
+		<Build_eNB_args>--gNB -w USRP --ninja</Build_eNB_args>
 		<forced_workspace_cleanup>True</forced_workspace_cleanup>
 	</testCase>
 

ci-scripts/xml_files/nr_ue_usrp_build.xml

@@ -34,7 +34,7 @@
 		<mode>TestUE</mode>
 		<class>Build_OAI_UE</class>
 		<desc>Build NR UE (USRP)</desc>
-		<Build_OAI_UE_args>--nrUE -w USRP</Build_OAI_UE_args>
+		<Build_OAI_UE_args>--nrUE -w USRP --ninja</Build_OAI_UE_args>
 		<clean_repository>false</clean_repository>
 	</testCase>
 

cmake_targets/CMakeLists.txt

@@ -27,6 +27,10 @@ cmake_minimum_required (VERSION 3.0)
 # Base directories, compatible with legacy OAI building #
 #########################################################
 set (OPENAIR_DIR     $ENV{OPENAIR_DIR})
+if("${OPENAIR_DIR}" STREQUAL "")
+  string(REGEX REPLACE "/cmake_targets.*$" "" OPENAIR_DIR ${CMAKE_CURRENT_BINARY_DIR})
+endif()
+
 set (NFAPI_DIR       ${OPENAIR_DIR}/nfapi/open-nFAPI)
 set (NFAPI_USER_DIR  ${OPENAIR_DIR}/nfapi/oai_integration)
 set (OPENAIR1_DIR    ${OPENAIR_DIR}/openair1)
@@ -1252,7 +1256,7 @@ set(SCHED_SRC_NR_UE
   ${OPENAIR1_DIR}/SCHED_NR_UE/phy_procedures_nr_ue.c
   ${OPENAIR1_DIR}/SCHED_NR/phy_procedures_nr_common.c
   ${OPENAIR1_DIR}/SCHED_NR_UE/fapi_nr_ue_l1.c 
-  ${OPENAIR1_DIR}/SCHED_NR/phy_frame_config_nr.c
+  ${OPENAIR1_DIR}/SCHED_NR_UE/phy_frame_config_nr_ue.c
   ${OPENAIR1_DIR}/SCHED_NR_UE/harq_nr.c
   ${OPENAIR1_DIR}/SCHED_NR_UE/pucch_uci_ue_nr.c
   ${OPENAIR1_DIR}/SCHED_NR_UE/pucch_power_control_ue_nr.c 
@@ -1543,6 +1547,7 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_dmrs_rx.c
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_gold.c
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/scrambling_luts.c
+  ${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_gen_mod_table.c
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/dmrs_nr.c
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/ptrs_nr.c
   ${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/filt16a_32.c
@@ -1595,6 +1600,7 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/dmrs_nr.c
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/ptrs_nr.c
   ${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_gold_ue.c
+  ${OPENAIR1_DIR}/PHY/NR_REFSIG/nr_gen_mod_table.c
   ${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/filt16a_32.c
   ${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/nr_dl_channel_estimation.c
   ${OPENAIR1_DIR}/PHY/NR_UE_ESTIMATION/nr_adjust_synch_ue.c
@@ -2475,8 +2481,8 @@ add_library(uescope MODULE ${XFORMS_SOURCE} ${XFORMS_SOURCE_SOFTMODEM} ${XFORMS_
 target_link_libraries(enbscope ${XFORMS_LIBRARIES})
 target_link_libraries(uescope ${XFORMS_LIBRARIES})
 
-add_library(gnbscope MODULE ${XFORMS_SOURCE_NR})
-target_link_libraries(gnbscope ${XFORMS_LIBRARIES})
+add_library(nrscope MODULE ${XFORMS_SOURCE_NR})
+target_link_libraries(nrscope ${XFORMS_LIBRARIES})
 
 
 add_library(rfsimulator MODULE 
@@ -2625,7 +2631,7 @@ add_executable(ocp-enb
   ${CONFIG_SOURCES}
   ${SHLIB_LOADER_SOURCES}
   )
-add_dependencies(ocp-enb rrc_flag s1ap_flag x2_flag oai_iqplayer)
+add_dependencies(ocp-enb rrc_flag s1ap_flag x2_flag oai_iqplayer coding params_libconfig rfsimulator)
 
 target_link_libraries (ocp-enb
   -Wl,--start-group
@@ -2732,7 +2738,7 @@ add_executable(nr-softmodem
   ${OPENAIR_DIR}/common/utils/system.c
   ${OPENAIR_DIR}/common/utils/nr/nr_common.c
   ${GTPU_need_ITTI}
-  ${XFORMS_SOURCE_NR}
+  ${XFORMSINTERFACE_SOURCE}
   ${T_SOURCE}
   ${CONFIG_SOURCES}
   ${SHLIB_LOADER_SOURCES}
@@ -2774,7 +2780,7 @@ add_executable(nr-uesoftmodem
   ${OPENAIR_DIR}/common/utils/utils.c
   ${OPENAIR_DIR}/common/utils/system.c
   ${OPENAIR_DIR}/common/utils/nr/nr_common.c
-  ${XFORMS_SOURCE_NR}
+  ${XFORMSINTERFACE_SOURCE}
   ${T_SOURCE}
   ${UTIL_SRC}
   ${CONFIG_SOURCES}

cmake_targets/build_oai

@@ -67,7 +67,7 @@ UE_TIMING_TRACE="False"
 USRP_REC_PLAY="False"
 BUILD_ECLIPSE=0
 NR="False"
-OPTIONAL_LIBRARIES="telnetsrv enbscope uescope msc"
+OPTIONAL_LIBRARIES="telnetsrv enbscope uescope nrscope msc"
 trap handle_ctrl_c INT
 
 function print_help() {
@@ -96,7 +96,9 @@ Options
    enable cmake debugging messages
 --eNB
   Makes the LTE softmodem
---gNB
+--eNBocp
+  Makes the OCP LTE softmodem
+-gNB
   Makes the NR softmodem
 --nrUE
   Makes the NR UE softmodem
@@ -237,7 +239,11 @@ function main() {
             eNB=1
             echo_info "Will compile eNB"
             shift;;
-       --gNB)
+       --eNBocp)
+            eNBocp=1
+            echo_info "Will compile OCP eNB"
+            shift;;
+      --gNB)
             gNB=1
             NR="True"
             echo_info "Will compile gNB"
@@ -443,7 +449,7 @@ function main() {
   ########################################################
   # to be discussed
   
-  if [ "$eNB" = "1" -o "$gNB" = "1" ] ; then
+  if [ "$eNB" = "1" -o "$eNBocp" = "1" -o "$gNB" = "1" ] ; then
       if [ "$HW" = "None" -a  "$TP" = "None" ] ; then
 	      echo_info "No local radio head and no transport protocol selected"
       fi
@@ -574,12 +580,13 @@ function main() {
   config_libconfig_shlib=params_libconfig
   
   # first generate the CMakefile in the right directory
-  if [ "$eNB" = "1" -o "$UE" = "1" -o "$gNB" = "1" -o "$nrUE" = "1" -o "$HW" = "EXMIMO" ] ; then
+  if [ "$eNB" = "1" -o "$eNBocp" = "1" -o "$UE" = "1" -o "$gNB" = "1" -o "$nrUE" = "1" -o "$HW" = "EXMIMO" ] ; then
 
     # softmodem compilation
 
     cmake_file=$DIR/$build_dir/CMakeLists.txt
     echo "cmake_minimum_required(VERSION 2.8)"                             >  $cmake_file
+    echo "project (OpenAirInterface)"                                    >> $cmake_file
     echo "set ( CMAKE_BUILD_TYPE $CMAKE_BUILD_TYPE )"                     >> $cmake_file
     echo "set ( CFLAGS_PROCESSOR_USER \"$CFLAGS_PROCESSOR_USER\" )"       >> $cmake_file
     echo "set ( UE_EXPANSION $UE_EXPANSION )"                             >> $cmake_file
@@ -606,6 +613,9 @@ function main() {
     if [ "$eNB" = "1" ] ; then
       execlist="$execlist lte-softmodem"
     fi
+    if [ "$eNBocp" = "1" ] ; then
+      execlist="$execlist ocp-enb"
+    fi
     if [ "$gNB" = "1" ] ; then
       execlist="$execlist nr-softmodem"
     fi
@@ -821,7 +831,7 @@ function main() {
   ####################################################
   # Build RF device and transport protocol libraries #
   ####################################################
-  if [ "$eNB" = "1" -o "$UE" = "1" -o "$gNB" = "1" -o "$nrUE" = "1" -o "$HWLAT" = "1" ] ; then
+  if [ "$eNB" = "1" -o "$eNBocp" = "1" -o "$UE" = "1" -o "$gNB" = "1" -o "$nrUE" = "1" -o "$HWLAT" = "1" ] ; then
 
       # build RF device libraries
       if [ "$HW" != "None" ] ; then

common/utils/ocp_itti/intertask_interface.cpp

@@ -80,7 +80,7 @@ task_list_t tasks[TASK_MAX];
 
   void *itti_malloc(task_id_t origin_task_id, task_id_t destination_task_id, ssize_t size) {
     void *ptr = NULL;
-    AssertFatal ((ptr=malloc (size)) != NULL, "Memory allocation of %zu bytes failed (%d -> %d)!\n",
+    AssertFatal ((ptr=calloc (size, 1)) != NULL, "Memory allocation of %zu bytes failed (%d -> %d)!\n",
                  size, origin_task_id, destination_task_id);
     return ptr;
   }

common/utils/telnetsrv/telnetsrv.c

@@ -53,6 +53,7 @@
 #include <sys/resource.h>
 #include "common/utils/load_module_shlib.h"
 #include "common/config/config_userapi.h"
+#include "common/utils/threadPool/thread-pool.h"
 #include "executables/softmodem-common.h"
 #include <readline/history.h>
 
@@ -507,12 +508,22 @@ int process_command(char *buf) {
         }
 
         rt= CMDSTATUS_FOUND;
-      } else if (strncasecmp(cmd,"get",3) == 0 || strncasecmp(cmd,"set",3) == 0) {
+      } else if (strcasecmp(cmd,"get") == 0 || strcasecmp(cmd,"set") == 0) {
         rt= setgetvar(i,cmd[0],cmdb);
       } else {
         for (k=0 ; telnetparams.CmdParsers[i].cmd[k].cmdfunc != NULL ; k++) {
           if (strncasecmp(cmd, telnetparams.CmdParsers[i].cmd[k].cmdname,sizeof(telnetparams.CmdParsers[i].cmd[k].cmdname)) == 0) {
-            telnetparams.CmdParsers[i].cmd[k].cmdfunc(cmdb, telnetparams.telnetdbg, client_printf);
+          	if (telnetparams.CmdParsers[i].cmd[k].qptr != NULL) {
+          		notifiedFIFO_elt_t *msg =newNotifiedFIFO_elt(sizeof(telnetsrv_qmsg_t),0,NULL,NULL);
+          		telnetsrv_qmsg_t *cmddata=NotifiedFifoData(msg);
+          		cmddata->cmdfunc=(qcmdfunc_t)telnetparams.CmdParsers[i].cmd[k].cmdfunc;
+          	    cmddata->prnt=client_printf;
+          	    cmddata->debug=telnetparams.telnetdbg;
+          		cmddata->cmdbuff=strdup(cmdb);
+          		pushNotifiedFIFO(telnetparams.CmdParsers[i].cmd[k].qptr, msg);
+          	} else {
+              telnetparams.CmdParsers[i].cmd[k].cmdfunc(cmdb, telnetparams.telnetdbg, client_printf);
+            }
             rt= CMDSTATUS_FOUND;
           }
         } /* for k */
@@ -673,6 +684,16 @@ void run_telnetsrv(void) {
   return;
 }
 
+void poll_telnetcmdq(void *qid, void *arg) {
+	notifiedFIFO_elt_t *msg = pollNotifiedFIFO((notifiedFIFO_t *)qid);
+	
+	if (msg != NULL) {
+	  telnetsrv_qmsg_t *msgdata=NotifiedFifoData(msg);
+	  msgdata->cmdfunc(msgdata->cmdbuff,msgdata->debug,msgdata->prnt,arg);
+	  free(msgdata->cmdbuff);
+	  delNotifiedFIFO_elt(msg);
+	}
+}
 /*------------------------------------------------------------------------------------------------*/
 /* load the commands delivered with the telnet server
  *
@@ -758,6 +779,7 @@ int telnetsrv_autoinit(void) {
 */
 int add_telnetcmd(char *modulename, telnetshell_vardef_t *var, telnetshell_cmddef_t *cmd) {
   int i;
+  notifiedFIFO_t *afifo=NULL;
 
   if( modulename == NULL || var == NULL || cmd == NULL) {
     fprintf(stderr,"[TELNETSRV] Telnet server, add_telnetcmd: invalid parameters\n");
@@ -769,6 +791,13 @@ int add_telnetcmd(char *modulename, telnetshell_vardef_t *var, telnetshell_cmdde
       strncpy(telnetparams.CmdParsers[i].module,modulename,sizeof(telnetparams.CmdParsers[i].module)-1);
       telnetparams.CmdParsers[i].cmd = cmd;
       telnetparams.CmdParsers[i].var = var;
+      if (cmd->cmdflags & TELNETSRV_CMDFLAG_PUSHINTPOOLQ) {
+      	  if (afifo == NULL) {
+      	  	  afifo = malloc(sizeof(notifiedFIFO_t));
+      	  	  initNotifiedFIFO(afifo);
+      	  }
+      	  cmd->qptr = afifo;
+      }
       printf("[TELNETSRV] Telnet server: module %i = %s added to shell\n",
              i,telnetparams.CmdParsers[i].module);
       break;
@@ -797,8 +826,10 @@ int  telnetsrv_checkbuildver(char *mainexec_buildversion, char **shlib_buildvers
 }
 
 int telnetsrv_getfarray(loader_shlibfunc_t  **farray) {
-  *farray=malloc(sizeof(loader_shlibfunc_t));
+  *farray=malloc(sizeof(loader_shlibfunc_t)*2);
   (*farray)[0].fname=TELNET_ADDCMD_FNAME;
   (*farray)[0].fptr=(int (*)(void) )add_telnetcmd;
-  return 1;
+  (*farray)[1].fname=TELNET_POLLCMDQ_FNAME;
+  (*farray)[1].fptr=(int (*)(void) )poll_telnetcmdq; 
+  return ( 2);
 }

common/utils/telnetsrv/telnetsrv.h

@@ -53,13 +53,26 @@
 /* to add a set of new command to the telnet server shell */
 typedef void(*telnet_printfunc_t)(const char* format, ...);
 typedef int(*cmdfunc_t)(char*, int, telnet_printfunc_t prnt);
+typedef int(*qcmdfunc_t)(char*, int, telnet_printfunc_t prnt,void *arg);
 
+#define TELNETSRV_CMDFLAG_PUSHINTPOOLQ   (1<<0)    // ask the telnet server to push the command in a thread pool queue
 typedef struct cmddef {
     char cmdname[TELNET_CMD_MAXSIZE];
     char helpstr[TELNET_HELPSTR_SIZE];
     cmdfunc_t cmdfunc; 
+    unsigned int cmdflags;
+    void *qptr;
 } telnetshell_cmddef_t;
 
+/*----------------------------------------------------------------------------*/
+/* structure used to send a command via a message queue to enable */
+/* executing a command in a thread different from the telnet server thread */
+typedef struct telnetsrv_qmsg {
+  qcmdfunc_t cmdfunc;
+  telnet_printfunc_t prnt;
+  int debug;
+  char *cmdbuff;
+} telnetsrv_qmsg_t;
 /*----------------------------------------------------------------------------*/
 /*structure to be used when adding a module to the telnet server */
 /* This is the first parameter of the add_telnetcmd function, which can be used   */
@@ -111,9 +124,6 @@ typedef struct {
 } telnetsrv_params_t;
 
 
-
-typedef int(*addcmdfunc_t)(char*, telnetshell_vardef_t*, telnetshell_cmddef_t*);
-
 typedef void(*settelnetmodule_t)(char *name, void *ptr); 
 
 /*-------------------------------------------------------------------------------------------*/
@@ -133,7 +143,9 @@ VT escape sequence definition, for smarter display....
 
 /*---------------------------------------------------------------------------------------------*/
 #define TELNET_ADDCMD_FNAME "add_telnetcmd"
+#define TELNET_POLLCMDQ_FNAME "poll_telnetcmdq"
 typedef int(*add_telnetcmd_func_t)(char *, telnetshell_vardef_t *, telnetshell_cmddef_t *);
+typedef void(*poll_telnetcmdq_func_t)(void *qid,void *arg);
 #ifdef TELNETSERVERCODE
 int add_telnetcmd(char *modulename, telnetshell_vardef_t *var, telnetshell_cmddef_t *cmd);
 void set_sched(pthread_t tid, int pid,int priority);

common/utils/threadPool/thread-pool.c

@@ -111,9 +111,10 @@ void initTpool(char *params,tpool_t *pool, bool performanceMeas) {
   pool->activated=true;
   initNotifiedFIFO(&pool->incomingFifo);
   char *saveptr, * curptr;
+  char *parms_cpy=strdup(params);
   pool->nbThreads=0;
   pool->restrictRNTI=false;
-  curptr=strtok_r(params,",",&saveptr);
+  curptr=strtok_r(parms_cpy,",",&saveptr);
   struct one_thread * ptr;
   while ( curptr!=NULL ) {
     int c=toupper(curptr[0]);
@@ -145,7 +146,7 @@ void initTpool(char *params,tpool_t *pool, bool performanceMeas) {
 
     curptr=strtok_r(NULL,",",&saveptr);
   }
-
+  free(parms_cpy);
   if (pool->activated && pool->nbThreads==0) {
     printf("No servers created in the thread pool, exit\n");
     exit(1);